~$ sudo i7z

sudo i7z
i7z DEBUG: i7z version: svn-r93-(27-MAY-2013)
i7z DEBUG: Found Intel Processor
i7z DEBUG:    Stepping 9
i7z DEBUG:    Model e
i7z DEBUG:    Family 6
i7z DEBUG:    Processor Type 0
i7z DEBUG:    Extended Model 9
i7z DEBUG: msr = Model Specific Register
i7z DEBUG: Unknown processor, not exactly based on Nehalem, Sandy bridge or Ivy Bridge
i7z DEBUG: msr device files exist /dev/cpu/*/msr
i7z DEBUG: You have write permissions to msr device files

------------------------------
--[core id]--- Other information
-------------------------------------
--[0] Processor number 0
--[0] Socket number/Hyperthreaded Sibling number  0,4
--[0] Core id number 0
--[0] Display core in i7z Tool: Yes

--[1] Processor number 1
--[1] Socket number/Hyperthreaded Sibling number  0,5
--[1] Core id number 1
--[1] Display core in i7z Tool: Yes

--[2] Processor number 2
--[2] Socket number/Hyperthreaded Sibling number  0,6
--[2] Core id number 2
--[2] Display core in i7z Tool: Yes

--[3] Processor number 3
--[3] Socket number/Hyperthreaded Sibling number  0,7
--[3] Core id number 3
--[3] Display core in i7z Tool: Yes

--[4] Processor number 4
--[4] Socket number/Hyperthreaded Sibling number  0,0
--[4] Core id number 0
--[4] Display core in i7z Tool: No

--[5] Processor number 5
--[5] Socket number/Hyperthreaded Sibling number  0,1
--[5] Core id number 1
--[5] Display core in i7z Tool: No

--[6] Processor number 6
--[6] Socket number/Hyperthreaded Sibling number  0,2
--[6] Core id number 2
--[6] Display core in i7z Tool: No

--[7] Processor number 7
--[7] Socket number/Hyperthreaded Sibling number  0,3
--[7] Core id number 3
--[7] Display core in i7z Tool: No

Socket-0 [num of cpus 4 physical 4 logical 8] 0,1,2,3,
Socket-1 [num of cpus 0 physical 0 logical 0] 
GUI has been Turned ON
i7z DEBUG: Single Socket Detected
i7z DEBUG: In i7z Single_Socket()
i7z DEBUG: guessing Nehalem

--------
AND THEN
--------

Cpu speed from cpuinfo 2903.00Mhz
cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating via tsc
Linux's inbuilt cpu_khz code emulated now
True Frequency (without accounting Turbo) 2903 MHz
  CPU Multiplier 29x || Bus clock frequency (BCLK) 100.10 MHz

Socket [0] - [physical cores=4, logical cores=8, max online cores ever=4]
  TURBO ENABLED on 4 Cores, Hyper Threading ON
  Max Frequency without considering Turbo 3003.10 MHz (100.10 x [30])
  Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is  39x/37x/36x/35x
  Real Current Frequency 1557.86 MHz [100.10 x 15.56] (Max of below)
        Core [core-id]  :Actual Freq (Mult.)      C0%   Halt(C1)%  C3 %   C6 %  Temp      VCore
        Core 1 [0]:       1516.07 (15.15x)      2.86    98.5       0       0    39      0.7573
        Core 2 [1]:       1557.86 (15.56x)      2.16    98.8       0       0    37      0.7573
        Core 3 [2]:       1533.17 (15.32x)      2.15    98.9       0       0    39      0.7550
        Core 4 [3]:       1554.47 (15.53x)      1.51    98.2       1       0    38      0.7552



C0 = Processor running without halting
C1 = Processor running with halts (States >C0 are power saver modes with cores idling)
C3 = Cores running with PLL turned off and core cache turned off
C6, C7 = Everything in C3 + core state saved to last level cache, C7 is deeper than C6
  Above values in table are in percentage over the last 1 sec
[core-id] refers to core-id number in /proc/cpuinfo
'Garbage Values' message printed when garbage values are read
  Ctrl+C to exit