[ 0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22 [ 0.000000] Linux version 4.8.0-34-generic (buildd@lcy01-21) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #36-Ubuntu SMP Wed Dec 21 17:24:18 UTC 2016 (Ubuntu 4.8.0-34.36-generic 4.8.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-34-generic.efi.signed root=UUID=e9242830-11df-4f7d-887d-c812313ff035 ro noprompt persistent quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006834cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000006834d000-0x000000006834dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006834e000-0x0000000068377fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000068378000-0x0000000068427fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000068428000-0x0000000068d28fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000068d29000-0x0000000075c3dfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000075c3e000-0x000000007662dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007662e000-0x0000000077fadfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077fae000-0x0000000077ffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x00000000780fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079000000-0x000000007c7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003827fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x6710b018-0x6711b057] usable ==> usable [ 0.000000] e820: update [mem 0x670f3018-0x6710ac57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000670f3017] usable [ 0.000000] reserve setup_data: [mem 0x00000000670f3018-0x000000006710ac57] usable [ 0.000000] reserve setup_data: [mem 0x000000006710ac58-0x000000006710b017] usable [ 0.000000] reserve setup_data: [mem 0x000000006710b018-0x000000006711b057] usable [ 0.000000] reserve setup_data: [mem 0x000000006711b058-0x000000006834cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000006834d000-0x000000006834dfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006834e000-0x0000000068377fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000068378000-0x0000000068427fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000068428000-0x0000000068d28fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000068d29000-0x0000000075c3dfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000075c3e000-0x000000007662dfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007662e000-0x0000000077fadfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000077fae000-0x0000000077ffdfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000077ffe000-0x0000000077ffefff] usable [ 0.000000] reserve setup_data: [mem 0x0000000077fff000-0x00000000780fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000079000000-0x000000007c7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000003827fffff] usable [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x75eb0000 ESRT=0x75fbb118 ACPI 2.0=0x77ffd014 [ 0.000000] esrt: Reserving ESRT space from 0x0000000075fbb118 to 0x0000000075fbb150. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Acer Aspire F5-572G/Zoro_SL , BIOS V1.08 11/06/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x382800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0077FFF000 mask 7FFFFFF000 uncachable [ 0.000000] 2 base 0078000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 14207M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 12583932K [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 5 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 60K [ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 5 lose cover RAM: 60K [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 12583932K [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 5 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 5 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 5 lose cover RAM: 124K [ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 5 lose cover RAM: 124K [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 12583932K [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 5 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 5 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 5 lose cover RAM: 252K [ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 5 lose cover RAM: 252K [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 12583932K [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 5 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 5 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 5 lose cover RAM: 508K [ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 5 lose cover RAM: 508K [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 12583932K [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 5 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 5 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 5 lose cover RAM: 1020K [ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 5 lose cover RAM: 1020K [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 8390652K [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 5 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 5 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 5 lose cover RAM: 2044K [ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 5 lose cover RAM: 2044K [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 5 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 5 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 5 lose cover RAM: 4092K [ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 5 lose cover RAM: 4092K [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 9 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 5 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 5 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 5 lose cover RAM: 8188K [ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 5 lose cover RAM: 8188K [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 8 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 5 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 5 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 5 lose cover RAM: 16380K [ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 5 lose cover RAM: 16380K [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 5 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 5 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 5 lose cover RAM: 32764K [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 5 lose cover RAM: 32764K [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 6 lose cover RAM: 65532K [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 65532K [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 5 lose cover RAM: 65532K [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 5 lose cover RAM: 65532K [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 5 lose cover RAM: 65532K [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 5 lose cover RAM: 65532K [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 5 lose cover RAM: 131068K [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 5 lose cover RAM: 131068K [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 5 lose cover RAM: 131068K [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 4 lose cover RAM: 131068K [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 393212K [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 4 lose cover RAM: 393212K [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 4 lose cover RAM: 393212K [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 917500K [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 917500K [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 1966076K [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] e820: update [mem 0x77fff000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff93e1c0080000] 80000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x30283c000, 0x30283cfff] PGTABLE [ 0.000000] BRK [0x30283d000, 0x30283dfff] PGTABLE [ 0.000000] BRK [0x30283e000, 0x30283efff] PGTABLE [ 0.000000] BRK [0x30283f000, 0x30283ffff] PGTABLE [ 0.000000] BRK [0x302840000, 0x302840fff] PGTABLE [ 0.000000] BRK [0x302841000, 0x302841fff] PGTABLE [ 0.000000] BRK [0x302842000, 0x302842fff] PGTABLE [ 0.000000] BRK [0x302843000, 0x302843fff] PGTABLE [ 0.000000] BRK [0x302844000, 0x302844fff] PGTABLE [ 0.000000] BRK [0x302845000, 0x302845fff] PGTABLE [ 0.000000] BRK [0x302846000, 0x302846fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3d29d000-0x3fffafff] [ 0.000000] Secure boot MOKSBState disabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000077FFD014 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x0000000077FDF188 000104 (v01 ACRSYS ACRPRDCT 00000000 01000013) [ 0.000000] ACPI: FACP 0x0000000077FE4000 00010C (v05 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: DSDT 0x0000000077FC7000 0161A2 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x0000000077FA9000 000040 [ 0.000000] ACPI: TCPA 0x0000000077FFC000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: UEFI 0x0000000077FFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: UEFI 0x0000000077FFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FF9000 0004B7 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FF8000 00004B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: TPM2 0x0000000077FF7000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FF2000 0040CA (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: MSDM 0x0000000077FF1000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FEC000 004E73 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: DBGP 0x0000000077FEB000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBG2 0x0000000077FEA000 000054 (v00 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FE9000 0004CA (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: ASF! 0x0000000077FE8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x0000000077FE7000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: BOOT 0x0000000077FE6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBGP 0x0000000077FE5000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x0000000077FE3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: LPIT 0x0000000077FE2000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: APIC 0x0000000077FE1000 0000BC (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x0000000077FE0000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FDE000 00019A (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FC6000 0004A3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FC5000 000E58 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000077FC1000 003009 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: DMAR 0x0000000077FC0000 0000CC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x0000000077FBF000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.000000] ACPI: BGRT 0x0000000077FBE000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000003827fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3827fb000-0x3827fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000003827fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000006834cfff] [ 0.000000] node 0: [mem 0x0000000068378000-0x0000000068427fff] [ 0.000000] node 0: [mem 0x0000000068d29000-0x0000000075c3dfff] [ 0.000000] node 0: [mem 0x0000000077ffe000-0x0000000077ffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003827fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003827fffff] [ 0.000000] On node 0 totalpages: 3111575 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3972 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7437 pages used for memmap [ 0.000000] DMA32 zone: 475923 pages, LIFO batch:31 [ 0.000000] Normal zone: 41120 pages used for memmap [ 0.000000] Normal zone: 2631680 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics memory at 0x000000007a800000-0x000000007c7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x670f3000-0x670f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6710a000-0x6710afff] [ 0.000000] PM: Registered nosave memory: [mem 0x6710b000-0x6710bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x6711b000-0x6711bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x6834d000-0x6834dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x6834e000-0x68377fff] [ 0.000000] PM: Registered nosave memory: [mem 0x68428000-0x68d28fff] [ 0.000000] PM: Registered nosave memory: [mem 0x75c3e000-0x7662dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7662e000-0x77fadfff] [ 0.000000] PM: Registered nosave memory: [mem 0x77fae000-0x77ffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x780fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7c7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0x7c800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff93e542400000 s107864 r8192 d31400 u262144 [ 0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3062933 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-34-generic.efi.signed root=UUID=e9242830-11df-4f7d-887d-c812313ff035 ro noprompt persistent quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12068380K/12446300K available (8836K kernel code, 1439K rwdata, 3812K rodata, 1556K init, 1296K bss, 377920K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:2048 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2400.000 MHz processor [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20160422 [ 0.036890] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.038411] Security Framework initialized [ 0.038412] Yama: becoming mindful. [ 0.038429] AppArmor: AppArmor initialized [ 0.039245] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.042279] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.043607] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.043620] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.043893] CPU: Physical Processor ID: 0 [ 0.043894] CPU: Processor Core ID: 0 [ 0.043899] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.043899] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.043904] mce: CPU supports 8 MCE banks [ 0.043912] CPU0: Thermal monitoring enabled (TM1) [ 0.043928] process: using mwait in idle threads [ 0.043931] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.043931] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.044380] Freeing SMP alternatives memory: 32K (ffffffff8b4ee000 - ffffffff8b4f6000) [ 0.049149] ftrace: allocating 33385 entries in 131 pages [ 0.064510] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.064511] smpboot: Max logical packages: 4 [ 0.064520] DMAR: Host address width 39 [ 0.064521] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.064527] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.064528] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.064532] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.064533] DMAR: RMRR base: 0x0000007652a000 end: 0x00000076549fff [ 0.064534] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff [ 0.064535] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.064536] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.064537] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.064538] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.064539] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.065953] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.065953] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.070009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.109701] TSC deadline timer enabled [ 0.109706] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.109709] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.109740] ... version: 4 [ 0.109740] ... bit width: 48 [ 0.109741] ... generic registers: 4 [ 0.109741] ... value mask: 0000ffffffffffff [ 0.109742] ... max period: 0000ffffffffffff [ 0.109742] ... fixed-purpose events: 3 [ 0.109743] ... event mask: 000000070000000f [ 0.110617] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.110681] x86: Booting SMP configuration: [ 0.110682] .... node #0, CPUs: #1 #2 #3 [ 0.119697] x86: Booted up 1 node, 4 CPUs [ 0.119699] smpboot: Total of 4 processors activated (19200.00 BogoMIPS) [ 0.123748] devtmpfs: initialized [ 0.123804] x86/mm: Memory block size: 128MB [ 0.126160] evm: security.selinux [ 0.126160] evm: security.SMACK64 [ 0.126161] evm: security.SMACK64EXEC [ 0.126161] evm: security.SMACK64TRANSMUTE [ 0.126161] evm: security.SMACK64MMAP [ 0.126162] evm: security.ima [ 0.126162] evm: security.capability [ 0.126215] PM: Registering ACPI NVS region [mem 0x6834d000-0x6834dfff] (4096 bytes) [ 0.126216] PM: Registering ACPI NVS region [mem 0x7662e000-0x77fadfff] (26738688 bytes) [ 0.126575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.126620] pinctrl core: initialized pinctrl subsystem [ 0.126782] RTC time: 18:31:53, date: 01/18/17 [ 0.127951] NET: Registered protocol family 16 [ 0.147723] cpuidle: using governor ladder [ 0.159716] cpuidle: using governor menu [ 0.159720] PCCT header not found. [ 0.159795] Simple Boot Flag at 0x44 set to 0x1 [ 0.159810] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.159811] ACPI: bus type PCI registered [ 0.159812] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.159871] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.159873] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.159875] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.160125] PCI: Using configuration type 1 for base access [ 0.175852] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.175853] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.176045] ACPI: Added _OSI(Module Device) [ 0.176046] ACPI: Added _OSI(Processor Device) [ 0.176047] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.176048] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177206] ACPI: Executed 18 blocks of module-level executable AML code [ 0.185502] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.188977] ACPI: Dynamic OEM Table Load: [ 0.189014] ACPI: SSDT 0xFFFF93E5336E2000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.189889] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.190910] ACPI: Dynamic OEM Table Load: [ 0.190919] ACPI: SSDT 0xFFFF93E5336F0C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.192246] ACPI: Dynamic OEM Table Load: [ 0.192255] ACPI: SSDT 0xFFFF93E5336E4000 0005AA (v02 PmRef ApIst 00003000 INTL 20130117) [ 0.193355] ACPI: Dynamic OEM Table Load: [ 0.193363] ACPI: SSDT 0xFFFF93E5337A6000 000119 (v02 PmRef ApCst 00003000 INTL 20130117) [ 0.195614] ACPI : EC: EC started [ 0.196062] ACPI: Interpreter enabled [ 0.196110] ACPI: (supports S0 S3 S4 S5) [ 0.196110] ACPI: Using IOAPIC for interrupt routing [ 0.196147] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.201741] ACPI: Power Resource [PC01] (on) [ 0.213155] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.213160] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.215893] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.215894] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.217722] PCI host bridge to bus 0000:00 [ 0.217724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.217725] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.217726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.217727] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.217728] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.217729] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.217730] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.217731] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.217732] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.217733] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.217734] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.217735] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.217735] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.217736] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.217737] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.217738] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window] [ 0.217739] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.217740] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.217748] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.218526] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.218535] pci 0000:00:02.0: reg 0x10: [mem 0x92000000-0x92ffffff 64bit] [ 0.218541] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.218546] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.219388] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.219407] pci 0000:00:14.0: reg 0x10: [mem 0x94500000-0x9450ffff 64bit] [ 0.219482] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.220239] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.220279] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.220298] pci 0000:00:14.2: reg 0x10: [mem 0x9452a000-0x9452afff 64bit] [ 0.221117] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.221142] pci 0000:00:15.0: reg 0x10: [mem 0x9452b000-0x9452bfff 64bit] [ 0.222015] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.222037] pci 0000:00:16.0: reg 0x10: [mem 0x9452c000-0x9452cfff 64bit] [ 0.222116] pci 0000:00:16.0: PME# supported from D3hot [ 0.222907] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.222923] pci 0000:00:17.0: reg 0x10: [mem 0x94528000-0x94529fff] [ 0.222931] pci 0000:00:17.0: reg 0x14: [mem 0x9452f000-0x9452f0ff] [ 0.222939] pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087] [ 0.222947] pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b] [ 0.222955] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.222963] pci 0000:00:17.0: reg 0x24: [mem 0x9452d000-0x9452d7ff] [ 0.223009] pci 0000:00:17.0: PME# supported from D3hot [ 0.223798] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.223868] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.224645] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.224689] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.224757] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.225524] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.225559] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.225627] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.226395] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.226442] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.227317] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.227329] pci 0000:00:1f.2: reg 0x10: [mem 0x94524000-0x94527fff] [ 0.228161] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.228186] pci 0000:00:1f.3: reg 0x10: [mem 0x94520000-0x94523fff 64bit] [ 0.228221] pci 0000:00:1f.3: reg 0x20: [mem 0x94510000-0x9451ffff 64bit] [ 0.228276] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.229032] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.229071] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.229117] pci 0000:00:1f.4: reg 0x10: [mem 0x9452e000-0x9452e0ff 64bit] [ 0.229186] pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f] [ 0.230080] pci 0000:01:00.0: [10de:1299] type 00 class 0x030200 [ 0.230095] pci 0000:01:00.0: reg 0x10: [mem 0x93000000-0x93ffffff] [ 0.230108] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.230121] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref] [ 0.230129] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] [ 0.230138] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.230253] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.239839] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.239841] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.239844] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x940fffff] [ 0.239848] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.239910] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.239929] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.239957] pci 0000:02:00.0: reg 0x18: [mem 0x94404000-0x94404fff 64bit] [ 0.239974] pci 0000:02:00.0: reg 0x20: [mem 0x94400000-0x94403fff 64bit] [ 0.240070] pci 0000:02:00.0: supports D1 D2 [ 0.240071] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.240123] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.251860] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.251863] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.251865] pci 0000:00:1c.4: bridge window [mem 0x94400000-0x944fffff] [ 0.252181] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000 [ 0.252408] pci 0000:03:00.0: reg 0x10: [mem 0x94200000-0x943fffff 64bit] [ 0.253846] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.254195] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.264027] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.264031] pci 0000:00:1c.5: bridge window [mem 0x94200000-0x943fffff] [ 0.265214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265265] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.265314] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265361] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265457] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265504] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265553] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265853] platform MSFT0101:00: failed to claim resource 1 [ 0.265859] acpi MSFT0101:00: platform device creation failed: -16 [ 0.265939] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.266080] ACPI : EC: EC stopped [ 0.266172] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62 [ 0.266173] ACPI : EC: EC started [ 0.266792] SCSI subsystem initialized [ 0.266827] libata version 3.00 loaded. [ 0.266857] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.266858] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.266860] vgaarb: loaded [ 0.266861] vgaarb: bridge control possible 0000:00:02.0 [ 0.266879] ACPI: bus type USB registered [ 0.266893] usbcore: registered new interface driver usbfs [ 0.266899] usbcore: registered new interface driver hub [ 0.266914] usbcore: registered new device driver usb [ 0.310060] PCI: Using ACPI for IRQ routing [ 0.338077] PCI: pci_cache_line_size set to 64 bytes [ 0.338433] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.338434] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.338435] e820: reserve RAM buffer [mem 0x670f3018-0x67ffffff] [ 0.338436] e820: reserve RAM buffer [mem 0x6710b018-0x67ffffff] [ 0.338437] e820: reserve RAM buffer [mem 0x6834d000-0x6bffffff] [ 0.338438] e820: reserve RAM buffer [mem 0x68428000-0x6bffffff] [ 0.338438] e820: reserve RAM buffer [mem 0x75c3e000-0x77ffffff] [ 0.338439] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff] [ 0.338440] e820: reserve RAM buffer [mem 0x382800000-0x383ffffff] [ 0.338529] NetLabel: Initializing [ 0.338529] NetLabel: domain hash size = 128 [ 0.338530] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.338542] NetLabel: unlabeled traffic allowed by default [ 0.338679] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.338684] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.340730] clocksource: Switched to clocksource hpet [ 0.347125] VFS: Disk quotas dquot_6.6.0 [ 0.347140] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.347222] AppArmor: AppArmor Filesystem Enabled [ 0.347259] pnp: PnP ACPI init [ 0.347438] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.347440] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.347441] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.347442] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.347443] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.347444] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.347445] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.347449] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.347771] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.347773] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.347926] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.347927] system 00:02: [io 0xffff] has been reserved [ 0.347928] system 00:02: [io 0xffff] has been reserved [ 0.347930] system 00:02: [io 0xffff] has been reserved [ 0.347931] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.347932] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.347933] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348036] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.348071] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.348073] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.348098] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.349344] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.349345] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.349346] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.349348] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.349909] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.349910] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.349911] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.349912] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.349913] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.349915] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.349916] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.349917] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.349918] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.349919] system 00:07: [mem 0x7c800000-0x7c81ffff] has been reserved [ 0.349921] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350141] pnp: PnP ACPI: found 8 devices [ 0.357085] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.357089] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.357113] pci 0000:01:00.0: BAR 6: assigned [mem 0x94000000-0x9407ffff pref] [ 0.357115] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.357117] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.357120] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x940fffff] [ 0.357123] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.357127] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.357129] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.357132] pci 0000:00:1c.4: bridge window [mem 0x94400000-0x944fffff] [ 0.357138] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.357142] pci 0000:00:1c.5: bridge window [mem 0x94200000-0x943fffff] [ 0.357148] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.357150] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.357151] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.357152] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.357153] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.357154] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.357155] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.357156] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.357157] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.357158] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.357159] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.357159] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.357160] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.357161] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.357162] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.357163] pci_bus 0000:00: resource 19 [mem 0x7c800000-0xdfffffff window] [ 0.357164] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window] [ 0.357165] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.357166] pci_bus 0000:01: resource 1 [mem 0x93000000-0x940fffff] [ 0.357167] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref] [ 0.357168] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.357169] pci_bus 0000:02: resource 1 [mem 0x94400000-0x944fffff] [ 0.357170] pci_bus 0000:03: resource 1 [mem 0x94200000-0x943fffff] [ 0.357199] NET: Registered protocol family 2 [ 0.357364] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.357542] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.357648] TCP: Hash tables configured (established 131072 bind 65536) [ 0.357671] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.357709] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.357769] NET: Registered protocol family 1 [ 0.357779] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.359636] PCI: CLS 64 bytes, default 64 [ 0.359668] Trying to unpack rootfs image as initramfs... [ 1.080185] Freeing initrd memory: 46456K (ffff93e1fd29d000 - ffff93e1ffffb000) [ 1.080255] DMAR: ACPI device "device:69" under DMAR at fed91000 as 00:15.0 [ 1.080265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.080267] software IO TLB [mem 0x71755000-0x75755000] (64MB) mapped at [ffff93e231755000-ffff93e235754fff] [ 1.080467] Scanning for low memory corruption every 60 seconds [ 1.080826] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.080848] audit: initializing netlink subsys (disabled) [ 1.080860] audit: type=2000 audit(1484764314.068:1): initialized [ 1.081238] Initialise system trusted keyrings [ 1.081358] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.082705] zbud: loaded [ 1.083065] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.083260] fuse init (API version 7.25) [ 1.083380] Allocating IMA blacklist keyring. [ 1.085116] Key type asymmetric registered [ 1.085117] Asymmetric key parser 'x509' registered [ 1.085156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.085192] io scheduler noop registered [ 1.085193] io scheduler deadline registered (default) [ 1.085200] io scheduler cfq registered [ 1.085879] aer 0000:00:1c.0:pcie002: service driver aer loaded [ 1.085903] aer 0000:00:1c.4:pcie002: service driver aer loaded [ 1.085925] aer 0000:00:1c.5:pcie002: service driver aer loaded [ 1.085936] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.085937] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.085939] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 1.085947] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 1.085948] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.085950] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ 1.085957] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.085958] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.085960] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded [ 1.085967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.085971] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.085998] efifb: probing for efifb [ 1.086017] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k [ 1.086018] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.086018] efifb: scrolling: redraw [ 1.086019] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.090139] Console: switching to colour frame buffer device 240x67 [ 1.094147] fb0: EFI VGA frame buffer device [ 1.094161] intel_idle: MWAIT substates: 0x11142120 [ 1.094162] intel_idle: v0.4.1 model 0x4E [ 1.094346] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.094454] ACPI: AC Adapter [ACAD] (on-line) [ 1.094509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.094517] ACPI: Power Button [PWRB] [ 1.094547] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.094548] ACPI: Sleep Button [SLPB] [ 1.094577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 1.094600] ACPI: Lid Switch [LID0] [ 1.094628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.094630] ACPI: Power Button [PWRF] [ 1.095060] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.095061] ACPI: Thermal Zone [TZ01] (55 C) [ 1.095095] GHES: HEST is not enabled! [ 1.095178] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.095973] ACPI: Battery Slot [BAT1] (battery present) [ 1.096843] Linux agpgart interface v0.103 [ 1.099354] brd: module loaded [ 1.100404] loop: module loaded [ 1.100551] libphy: Fixed MDIO Bus: probed [ 1.100552] tun: Universal TUN/TAP device driver, 1.6 [ 1.100552] tun: (C) 1999-2004 Max Krasnyansky [ 1.100583] PPP generic driver version 2.4.2 [ 1.100620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.100622] ehci-pci: EHCI PCI platform driver [ 1.100631] ehci-platform: EHCI generic platform driver [ 1.100638] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.100640] ohci-pci: OHCI PCI platform driver [ 1.100646] ohci-platform: OHCI generic platform driver [ 1.100651] uhci_hcd: USB Universal Host Controller Interface driver [ 1.100841] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.100846] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.101936] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.101940] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.102021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.102022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.102023] usb usb1: Product: xHCI Host Controller [ 1.102024] usb usb1: Manufacturer: Linux 4.8.0-34-generic xhci-hcd [ 1.102025] usb usb1: SerialNumber: 0000:00:14.0 [ 1.102117] hub 1-0:1.0: USB hub found [ 1.102131] hub 1-0:1.0: 12 ports detected [ 1.110502] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.110505] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.110529] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.110530] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.110531] usb usb2: Product: xHCI Host Controller [ 1.110532] usb usb2: Manufacturer: Linux 4.8.0-34-generic xhci-hcd [ 1.110532] usb usb2: SerialNumber: 0000:00:14.0 [ 1.110654] hub 2-0:1.0: USB hub found [ 1.110663] hub 2-0:1.0: 6 ports detected [ 1.114853] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.114854] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.117035] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.117188] mousedev: PS/2 mouse device common for all mice [ 1.117526] rtc_cmos 00:03: RTC can wake from S4 [ 1.117922] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.118002] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.118007] i2c /dev entries driver [ 1.118059] device-mapper: uevent: version 1.0.3 [ 1.118117] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.118119] intel_pstate: Intel P-state driver initializing [ 1.118395] intel_pstate: HWP enabled [ 1.118563] ledtrig-cpu: registered to indicate activity on CPUs [ 1.118565] EFI Variables Facility v0.08 2004-May-17 [ 1.126199] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.158685] NET: Registered protocol family 10 [ 1.158906] NET: Registered protocol family 17 [ 1.158911] Key type dns_resolver registered [ 1.159146] microcode: sig=0x406e3, pf=0x80, revision=0x9e [ 1.159233] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.159533] registered taskstats version 1 [ 1.159535] Loading compiled-in X.509 certificates [ 1.162125] Loaded X.509 cert 'Build time autogenerated kernel key: fa0a468f3374d9e18aac93890ca6a40c266c58ec' [ 1.162140] zswap: loaded using pool lzo/zbud [ 1.174665] Key type big_key registered [ 1.176685] Key type trusted registered [ 1.178441] Key type encrypted registered [ 1.178443] AppArmor: AppArmor sha1 policy hashing enabled [ 1.178445] ima: No TPM chip found, activating TPM-bypass! [ 1.178463] evm: HMAC attrs: 0x1 [ 1.179376] Magic number: 1:708:544 [ 1.179407] tty ttyS20: hash matches [ 1.179633] rtc_cmos 00:03: setting system clock to 2017-01-18 18:31:54 UTC (1484764314) [ 1.179768] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.179768] EDD information not available. [ 1.179844] PM: Hibernation image not present or could not be loaded. [ 1.180836] Freeing unused kernel memory: 1556K (ffffffff8b369000 - ffffffff8b4ee000) [ 1.180836] Write protecting the kernel read-only data: 14336k [ 1.181205] Freeing unused kernel memory: 1388K (ffff93e4c1ea5000 - ffff93e4c2000000) [ 1.181665] Freeing unused kernel memory: 284K (ffff93e4c23b9000 - ffff93e4c2400000) [ 1.187911] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.197881] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.197935] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.197940] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.198171] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.198194] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.199108] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.199118] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.199368] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.199399] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.199429] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.222039] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.234728] hidraw: raw HID events driver (C) Jiri Kosina [ 1.242441] nvidia: loading out-of-tree module taints kernel. [ 1.242448] nvidia: module license 'NVIDIA' taints kernel. [ 1.242449] Disabling lock debugging due to kernel taint [ 1.243073] [drm] Initialized drm 1.1.0 20060810 [ 1.243462] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.243474] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.245576] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.249641] nvidia 0000:01:00.0: enabling device (0406 -> 0407) [ 1.249778] ahci 0000:00:17.0: version 3.0 [ 1.249845] nvidia-nvlink: Nvlink Core is being initialized, major device number 246 [ 1.249858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.57 Mon Oct 3 20:37:01 PDT 2016 [ 1.250015] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.250018] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.250810] scsi host0: ahci [ 1.251476] scsi host1: ahci [ 1.251882] ata1: SATA max UDMA/133 abar m2048@0x9452d000 port 0x9452d100 irq 126 [ 1.251884] ata2: SATA max UDMA/133 abar m2048@0x9452d000 port 0x9452d180 irq 126 [ 1.253932] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffbbde818f8000, 54:ab:3a:11:da:fe, XID 14100800 IRQ 127 [ 1.253934] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.259209] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.57 Mon Oct 3 20:32:57 PDT 2016 [ 1.259638] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 1.270922] [drm] Memory usable by graphics device = 4096M [ 1.270924] checking generic (a0000000 7e9000) vs hw (a0000000 10000000) [ 1.270925] fb: switching to inteldrmfb from EFI VGA [ 1.270947] Console: switching to colour dummy device 80x25 [ 1.271239] [drm] Replacing VGA console driver [ 1.278141] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.278142] [drm] Driver supports precise vblank timestamp query. [ 1.285078] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.286740] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 1.293621] [drm] GuC firmware load skipped [ 1.301638] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.301937] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.302071] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS [ 1.302078] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no) [ 1.302105] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input6 [ 1.302155] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 1 [ 1.304889] fbcon: inteldrmfb (fb0) is primary device [ 1.436950] usb 1-2: new low-speed USB device number 2 using xhci_hcd [ 1.565647] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.565673] ata2: SATA link down (SStatus 4 SControl 300) [ 1.568653] ata1.00: ATA-9: LITEON CV1-CC256, GC81201, max UDMA/133 [ 1.568654] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.569644] ata1.00: configured for UDMA/133 [ 1.569999] scsi 0:0:0:0: Direct-Access ATA LITEON CV1-CC256 201 PQ: 0 ANSI: 5 [ 1.582708] usb 1-2: New USB device found, idVendor=0603, idProduct=1031 [ 1.582709] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.582710] usb 1-2: Product: USB Composite Device [ 1.582711] usb 1-2: Manufacturer: SINO WEALTH [ 1.587872] usbcore: registered new interface driver usbhid [ 1.587872] usbhid: USB HID core driver [ 1.589228] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0603:1031.0001/input/input7 [ 1.589502] hid-generic 0003:0603:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2/input0 [ 1.601103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.601137] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.601138] sd 0:0:0:0: [sda] Write Protect is off [ 1.601139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.601152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.602810] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 1.603179] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.700933] usb 1-5: new full-speed USB device number 3 using xhci_hcd [ 1.843377] usb 1-5: New USB device found, idVendor=04ca, idProduct=3015 [ 1.843379] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.020951] usb 1-7: new high-speed USB device number 4 using xhci_hcd [ 2.092954] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 2.092962] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 2.170524] usb 1-7: New USB device found, idVendor=04f2, idProduct=b520 [ 2.170525] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.170526] usb 1-7: Product: HD WebCam [ 2.170526] usb 1-7: Manufacturer: SunplusIT Inc [ 2.348955] usb 1-8: new high-speed USB device number 5 using xhci_hcd [ 2.489143] usb 1-8: New USB device found, idVendor=0bda, idProduct=0129 [ 2.489144] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.489145] usb 1-8: Product: USB2.0-CRW [ 2.489146] usb 1-8: Manufacturer: Generic [ 2.489147] usb 1-8: SerialNumber: 20100201396000000 [ 2.492779] usbcore: registered new interface driver rtsx_usb [ 2.690576] Console: switching to colour frame buffer device 240x67 [ 2.710560] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.744849] random: fast init done [ 2.783821] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.796993] [drm] RC6 on [ 2.863355] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 2.884347] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.983753] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.983852] systemd[1]: Detected architecture x86-64. [ 2.983978] systemd[1]: Set hostname to . [ 3.042826] systemd[1]: lmt-poll.service: Cannot add dependency job, ignoring: Unit lmt-poll.service is masked. [ 3.042831] systemd[1]: tlp.service: Cannot add dependency job, ignoring: Unit tlp.service is masked. [ 3.042844] systemd[1]: laptop-mode.service: Cannot add dependency job, ignoring: Unit laptop-mode.service is masked. [ 3.042846] systemd[1]: laptop-mode.timer: Cannot add dependency job, ignoring: Unit laptop-mode.timer is masked. [ 3.043910] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.043985] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.044017] systemd[1]: Reached target User and Group Name Lookups. [ 3.082473] lp: driver loaded but no devices found [ 3.085617] ppdev: user-space parallel port driver [ 3.116799] clocksource: Switched to clocksource tsc [ 3.162207] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 3.168642] systemd-journald[252]: Received request to flush runtime journal from PID 1 [ 3.261005] wmi: Mapper loaded [ 3.284754] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 3.293654] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 3.294223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.294275] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.313473] Bluetooth: Core ver 2.21 [ 3.313484] NET: Registered protocol family 31 [ 3.313485] Bluetooth: HCI device and connection manager initialized [ 3.313488] Bluetooth: HCI socket layer initialized [ 3.313490] Bluetooth: L2CAP socket layer initialized [ 3.313494] Bluetooth: SCO socket layer initialized [ 3.333550] media: Linux media interface: v0.10 [ 3.342502] Linux video capture interface: v2.00 [ 3.361533] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.361534] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.361535] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.361535] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.361536] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.361537] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.361808] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b520) [ 3.364867] usbcore: registered new interface driver btusb [ 3.381675] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized! [ 3.381677] uvcvideo 1-7:1.0: Entity type for entity Extension 3 was not initialized! [ 3.381679] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized! [ 3.381680] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized! [ 3.381757] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input8 [ 3.381816] usbcore: registered new interface driver uvcvideo [ 3.381817] USB Video Class driver (1.1.1) [ 3.385119] AVX2 version of gcm_enc/dec engaged. [ 3.385121] AES CTR mode by8 optimization enabled [ 3.418570] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242 [ 3.449119] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 3.451229] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451286] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451316] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451356] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451380] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451463] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.451487] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.469537] intel_rapl: Found RAPL domain package [ 3.469539] intel_rapl: Found RAPL domain core [ 3.469541] intel_rapl: Found RAPL domain uncore [ 3.469542] intel_rapl: Found RAPL domain dram [ 3.505790] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.526566] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.528159] random: crng init done [ 3.547965] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.547966] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.547968] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 3.547968] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.547969] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.547970] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 [ 3.566042] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 3.566106] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 3.566176] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 3.566232] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 3.617241] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 3.617259] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID) [ 3.617260] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000 [ 3.617261] pcieport 0000:00:1c.5: [ 0] Receiver Error (First) [ 3.617271] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 3.617282] pcieport 0000:00:1c.5: can't find device of ID00e5 [ 3.617283] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 3.617294] pcieport 0000:00:1c.5: can't find device of ID00e5 [ 3.679590] Adding 4058108k swap on /dev/sda6. Priority:-1 extents:1 across:4058108k SSFS [ 3.684798] acer_wmi: Acer Laptop ACPI-WMI Extras [ 3.684827] acer_wmi: Function bitmap for Communication Button: 0x801 [ 3.698784] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0 [ 3.698851] input: Acer WMI hotkeys as /devices/virtual/input/input13 [ 3.699531] input: Acer BMA150 accelerometer as /devices/virtual/input/input14 [ 3.735449] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2 [ 3.735462] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2 [ 3.738767] ath10k_pci 0000:03:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 11ad:0806 [ 3.738770] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 3.739248] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [ 3.807740] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 3.821460] input: SYN1B81:01 06CB:7406 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-SYN1B81:01/0018:06CB:7406.0002/input/input15 [ 3.827495] hid-multitouch 0018:06CB:7406.0002: input,hidraw1: I2C HID v1.00 Mouse [SYN1B81:01 06CB:7406] on i2c-SYN1B81:01 [ 3.830732] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [ 3.903618] audit: type=1400 audit(1484760717.217:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=810 comm="apparmor_parser" [ 3.907101] audit: type=1400 audit(1484760717.221:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=807 comm="apparmor_parser" [ 3.907106] audit: type=1400 audit(1484760717.221:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser" [ 3.907110] audit: type=1400 audit(1484760717.221:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=807 comm="apparmor_parser" [ 3.907114] audit: type=1400 audit(1484760717.221:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser" [ 3.908589] audit: type=1400 audit(1484760717.221:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=806 comm="apparmor_parser" [ 3.908594] audit: type=1400 audit(1484760717.221:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=806 comm="apparmor_parser" [ 3.910266] audit: type=1400 audit(1484760717.225:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=812 comm="apparmor_parser" [ 3.910274] audit: type=1400 audit(1484760717.225:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=812 comm="apparmor_parser" [ 4.094077] cgroup: new mount options do not match the existing superblock, will be ignored [ 4.251732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.251733] Bluetooth: BNEP filters: protocol multicast [ 4.251737] Bluetooth: BNEP socket layer initialized [ 4.297238] bbswitch: version 0.8 [ 4.297243] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 4.297247] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PXSX [ 4.297257] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.297327] bbswitch: detected an Optimus _DSM function [ 4.297337] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 4.546392] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 4.567613] r8169 0000:02:00.0 enp2s0: link down [ 4.567700] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 4.640466] vgaarb: this pci device is not a vga device [ 4.644829] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.644868] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.644888] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.644919] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.644939] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.644986] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.645006] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.645546] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95) [ 4.841434] nvidia-modeset: Allocated GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [ 4.841627] nvidia-modeset: Freed GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [ 5.143214] vgaarb: this pci device is not a vga device [ 5.603423] ath10k_pci 0000:03:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 5.609846] ath: EEPROM regdomain: 0x6c [ 5.609847] ath: EEPROM indicates we should expect a direct regpair map [ 5.609848] ath: Country alpha2 being used: 00 [ 5.609849] ath: Regpair used: 0x6c [ 5.617257] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0 [ 5.652512] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 5.653347] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 5.653363] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID) [ 5.653372] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000081/00002000 [ 5.653378] pcieport 0000:00:1c.5: [ 0] Receiver Error (First) [ 5.653383] pcieport 0000:00:1c.5: [ 7] Bad DLLP [ 5.653392] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 5.653400] pcieport 0000:00:1c.5: can't find device of ID00e5 [ 5.653403] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 5.653411] pcieport 0000:00:1c.5: can't find device of ID00e5 [ 5.653414] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 5.653422] pcieport 0000:00:1c.5: can't find device of ID00e5 [ 5.685398] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5 [ 5.685416] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID) [ 5.685424] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000 [ 5.685429] pcieport 0000:00:1c.5: [ 0] Receiver Error (First) [ 7.578472] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 7.642936] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 9.180324] Bluetooth: RFCOMM TTY layer initialized [ 9.180329] Bluetooth: RFCOMM socket layer initialized [ 9.180333] Bluetooth: RFCOMM ver 1.11 [ 16.974082] wlp3s0: authenticate with e0:3f:49:24:2c:94 [ 17.002559] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [ 17.004168] wlp3s0: authenticated [ 17.009053] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [ 17.011743] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [ 17.015111] wlp3s0: associated [ 17.015205] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 17.023574] ath: EEPROM regdomain: 0x8114 [ 17.023577] ath: EEPROM indicates we should expect a country code [ 17.023580] ath: doing EEPROM country->regdmn map search [ 17.023582] ath: country maps to regdmn code: 0x37 [ 17.023584] ath: Country alpha2 being used: DE [ 17.023586] ath: Regpair used: 0x37 [ 17.023589] ath: regdomain 0x8114 dynamically updated by country IE [ 17.090015] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [ 945.540728] vgaarb: this pci device is not a vga device [ 2099.901576] vgaarb: this pci device is not a vga device [ 3531.887998] vgaarb: this pci device is not a vga device [ 3819.341484] vgaarb: this pci device is not a vga device [ 4706.800282] vgaarb: this pci device is not a vga device [ 7353.476895] vgaarb: this pci device is not a vga device [ 7761.992147] vgaarb: this pci device is not a vga device [10529.333609] vgaarb: this pci device is not a vga device [11105.962747] vgaarb: this pci device is not a vga device [11192.197491] vgaarb: this pci device is not a vga device [11502.667345] vgaarb: this pci device is not a vga device [12041.581436] vgaarb: this pci device is not a vga device [12056.877698] vgaarb: this pci device is not a vga device [12076.965281] vgaarb: this pci device is not a vga device [12091.966233] vgaarb: this pci device is not a vga device [12439.997317] vgaarb: this pci device is not a vga device [12455.270982] vgaarb: this pci device is not a vga device [14452.162656] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5 [14452.162665] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e5(Transmitter ID) [14452.162671] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000 [14452.162675] pcieport 0000:00:1c.5: [12] Replay Timer Timeout [14654.429525] vgaarb: this pci device is not a vga device [15064.052045] perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [15071.196157] vgaarb: this pci device is not a vga device [17671.557466] vgaarb: this pci device is not a vga device [18496.334421] vgaarb: this pci device is not a vga device [27493.615119] perf: interrupt took too long (3165 > 3162), lowering kernel.perf_event_max_sample_rate to 63000 [45414.226246] perf: interrupt took too long (3973 > 3956), lowering kernel.perf_event_max_sample_rate to 50250 [58043.773424] vgaarb: this pci device is not a vga device [58626.569398] vgaarb: this pci device is not a vga device [72028.351421] perf: interrupt took too long (4975 > 4966), lowering kernel.perf_event_max_sample_rate to 40000 [85504.949383] vgaarb: this pci device is not a vga device [87996.919854] vgaarb: this pci device is not a vga device [88378.501483] vgaarb: this pci device is not a vga device [88715.382947] vgaarb: this pci device is not a vga device [90259.557138] vgaarb: this pci device is not a vga device [91788.509181] vgaarb: this pci device is not a vga device [93028.084959] vgaarb: this pci device is not a vga device [93545.258931] vgaarb: this pci device is not a vga device [93703.940659] vgaarb: this pci device is not a vga device [94921.875761] vgaarb: this pci device is not a vga device [95294.124883] vgaarb: this pci device is not a vga device [96444.537913] vgaarb: this pci device is not a vga device [96718.997082] vgaarb: this pci device is not a vga device [97456.809515] vgaarb: this pci device is not a vga device [98567.869285] vgaarb: this pci device is not a vga device [98949.741787] vgaarb: this pci device is not a vga device [98958.605375] vgaarb: this pci device is not a vga device [99600.533965] vgaarb: this pci device is not a vga device [100093.501114] vgaarb: this pci device is not a vga device [101002.007993] vgaarb: this pci device is not a vga device [106765.965367] vgaarb: this pci device is not a vga device [107710.914869] vgaarb: this pci device is not a vga device [107824.965583] vgaarb: this pci device is not a vga device [109124.336866] vgaarb: this pci device is not a vga device [109161.733095] vgaarb: this pci device is not a vga device [110473.339602] vgaarb: this pci device is not a vga device [142216.178242] perf: interrupt took too long (6224 > 6218), lowering kernel.perf_event_max_sample_rate to 32000 [142677.237197] vgaarb: this pci device is not a vga device [143965.866462] vgaarb: this pci device is not a vga device [176644.389418] vgaarb: this pci device is not a vga device [177699.137949] vgaarb: this pci device is not a vga device [186895.653445] vgaarb: this pci device is not a vga device [187443.064388] vgaarb: this pci device is not a vga device [187710.869020] vgaarb: this pci device is not a vga device [188021.821395] vgaarb: this pci device is not a vga device [196436.269431] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5 [196436.269449] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e5(Transmitter ID) [196436.269463] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000 [196436.269472] pcieport 0000:00:1c.5: [12] Replay Timer Timeout [207177.002532] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5 [207177.002549] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e5(Transmitter ID) [207177.002563] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000 [207177.002572] pcieport 0000:00:1c.5: [12] Replay Timer Timeout [232452.641934] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [232453.010948] vgaarb: this pci device is not a vga device [232455.818672] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [232455.818682] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [232465.903481] PM: Syncing filesystems ... done. [232465.915504] PM: Preparing system for sleep (mem) [232468.620281] Freezing user space processes ... (elapsed 0.003 seconds) done. [232468.624108] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [232468.624439] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [232468.626259] PM: Suspending system (mem) [232468.626348] Suspending console(s) (use no_console_suspend to debug) [232468.648152] sd 0:0:0:0: [sda] Synchronizing SCSI cache [232468.650908] sd 0:0:0:0: [sda] Stopping disk [232469.936684] PM: suspend of devices complete after 1289.753 msecs [232469.954448] PM: late suspend of devices complete after 17.762 msecs [232469.956387] r8169 0000:02:00.0: System wakeup enabled by ACPI [232469.956417] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [232469.994452] PM: noirq suspend of devices complete after 40.001 msecs [232469.994765] ACPI: Preparing to enter system sleep state S3 [232469.995256] ACPI : EC: EC stopped [232469.995257] PM: Saving platform NVS memory [232469.995464] Disabling non-boot CPUs ... [232469.995742] Broke affinity for irq 126 [232469.995744] Broke affinity for irq 127 [232469.997106] smpboot: CPU 1 is now offline [232470.011229] Broke affinity for irq 122 [232470.011231] Broke affinity for irq 123 [232470.011234] Broke affinity for irq 124 [232470.011236] Broke affinity for irq 125 [232470.011239] Broke affinity for irq 126 [232470.011241] Broke affinity for irq 127 [232470.011244] Broke affinity for irq 128 [232470.011247] Broke affinity for irq 130 [232470.012315] smpboot: CPU 2 is now offline [232470.040013] Broke affinity for irq 1 [232470.040023] Broke affinity for irq 8 [232470.040030] Broke affinity for irq 9 [232470.040040] Broke affinity for irq 16 [232470.040053] Broke affinity for irq 82 [232470.040064] Broke affinity for irq 122 [232470.040071] Broke affinity for irq 123 [232470.040078] Broke affinity for irq 124 [232470.040085] Broke affinity for irq 125 [232470.040093] Broke affinity for irq 126 [232470.040100] Broke affinity for irq 127 [232470.040109] Broke affinity for irq 128 [232470.040116] Broke affinity for irq 130 [232470.040124] Broke affinity for irq 131 [232470.041277] smpboot: CPU 3 is now offline [232470.054958] ACPI: Low-level resume complete [232470.055072] ACPI : EC: EC started [232470.055073] PM: Restoring platform NVS memory [232470.057373] Enabling non-boot CPUs ... [232470.078933] x86: Booting SMP configuration: [232470.078934] smpboot: Booting Node 0 Processor 1 APIC 0x2 [232470.082829] cache: parent cpu1 should not be sleeping [232470.083009] CPU1 is up [232470.123093] smpboot: Booting Node 0 Processor 2 APIC 0x1 [232470.126259] cache: parent cpu2 should not be sleeping [232470.126651] CPU2 is up [232470.151163] smpboot: Booting Node 0 Processor 3 APIC 0x3 [232470.154244] cache: parent cpu3 should not be sleeping [232470.154663] CPU3 is up [232470.161816] ACPI: Waking up from system sleep state S3 [232470.187620] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [232470.249518] PM: noirq resume of devices complete after 62.551 msecs [232470.267053] PM: early resume of devices complete after 17.455 msecs [232470.267449] r8169 0000:02:00.0: System wakeup disabled by ACPI [232470.267795] rtc_cmos 00:03: System wakeup disabled by ACPI [232470.273915] [drm] GuC firmware load skipped [232470.274308] sd 0:0:0:0: [sda] Starting disk [232470.288339] r8169 0000:02:00.0 enp2s0: link down [232470.333446] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [232470.352159] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [232470.370803] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [232470.590595] ata2: SATA link down (SStatus 4 SControl 300) [232470.590621] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [232470.595008] ata1.00: configured for UDMA/133 [232470.755275] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [232471.163386] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [232471.435398] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [232471.695222] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [232471.695250] [drm] RC6 on [232471.861103] PM: resume of devices complete after 1594.053 msecs [232471.861238] usb 1-5:1.0: rebind failed: -517 [232471.861239] usb 1-5:1.1: rebind failed: -517 [232471.861421] PM: Finishing wakeup. [232471.861422] Restarting tasks ... done. [232472.867842] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [232472.885965] r8169 0000:02:00.0 enp2s0: link down [232472.886102] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [232472.887003] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [232474.817450] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [232474.906931] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [232484.228040] wlp3s0: authenticate with e0:3f:49:24:2c:94 [232484.256014] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [232484.256662] wlp3s0: authenticated [232484.258712] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [232484.261033] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=2) [232484.264457] wlp3s0: associated [232484.264503] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [232484.267942] ath: EEPROM regdomain: 0x8114 [232484.267943] ath: EEPROM indicates we should expect a country code [232484.267944] ath: doing EEPROM country->regdmn map search [232484.267945] ath: country maps to regdmn code: 0x37 [232484.267945] ath: Country alpha2 being used: DE [232484.267946] ath: Regpair used: 0x37 [232484.267947] ath: regdomain 0x8114 dynamically updated by country IE [232484.348781] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [234173.117399] vgaarb: this pci device is not a vga device [234694.422914] vgaarb: this pci device is not a vga device [235008.432064] vgaarb: this pci device is not a vga device [249973.598361] vgaarb: this pci device is not a vga device [250834.980764] vgaarb: this pci device is not a vga device [261171.492529] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [261174.544470] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [261174.544475] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [261174.563838] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [261184.651838] PM: Syncing filesystems ... done. [261184.662111] PM: Preparing system for sleep (mem) [261184.664098] vgaarb: this pci device is not a vga device [261185.406404] Freezing user space processes ... (elapsed 0.002 seconds) done. [261185.408595] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [261185.408860] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [261185.410521] PM: Suspending system (mem) [261185.410584] Suspending console(s) (use no_console_suspend to debug) [261185.412007] sd 0:0:0:0: [sda] Synchronizing SCSI cache [261185.414721] sd 0:0:0:0: [sda] Stopping disk [261185.428299] tpm tpm0: A TPM error (325) occurred stopping the TPM [261186.690404] PM: suspend of devices complete after 1279.507 msecs [261186.708301] PM: late suspend of devices complete after 17.889 msecs [261186.709763] r8169 0000:02:00.0: System wakeup enabled by ACPI [261186.710138] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [261186.748302] PM: noirq suspend of devices complete after 39.992 msecs [261186.749550] ACPI: Preparing to enter system sleep state S3 [261186.750807] ACPI : EC: EC stopped [261186.750809] PM: Saving platform NVS memory [261186.751361] Disabling non-boot CPUs ... [261186.752301] Broke affinity for irq 126 [261186.752310] Broke affinity for irq 127 [261186.754766] smpboot: CPU 1 is now offline [261186.770321] Broke affinity for irq 122 [261186.770330] Broke affinity for irq 123 [261186.770337] Broke affinity for irq 124 [261186.770345] Broke affinity for irq 125 [261186.770353] Broke affinity for irq 126 [261186.770361] Broke affinity for irq 127 [261186.770370] Broke affinity for irq 128 [261186.770384] Broke affinity for irq 131 [261186.771566] smpboot: CPU 2 is now offline [261186.793884] Broke affinity for irq 1 [261186.793893] Broke affinity for irq 8 [261186.793900] Broke affinity for irq 9 [261186.793910] Broke affinity for irq 16 [261186.793922] Broke affinity for irq 82 [261186.793933] Broke affinity for irq 122 [261186.793940] Broke affinity for irq 123 [261186.793947] Broke affinity for irq 124 [261186.793955] Broke affinity for irq 125 [261186.793962] Broke affinity for irq 126 [261186.793970] Broke affinity for irq 127 [261186.793978] Broke affinity for irq 128 [261186.793986] Broke affinity for irq 130 [261186.793993] Broke affinity for irq 131 [261186.795148] smpboot: CPU 3 is now offline [261186.812805] ACPI: Low-level resume complete [261186.812920] ACPI : EC: EC started [261186.812920] PM: Restoring platform NVS memory [261186.815220] Enabling non-boot CPUs ... [261186.836709] x86: Booting SMP configuration: [261186.836710] smpboot: Booting Node 0 Processor 1 APIC 0x2 [261186.840597] cache: parent cpu1 should not be sleeping [261186.840783] CPU1 is up [261186.880867] smpboot: Booting Node 0 Processor 2 APIC 0x1 [261186.884010] cache: parent cpu2 should not be sleeping [261186.884403] CPU2 is up [261186.912939] smpboot: Booting Node 0 Processor 3 APIC 0x3 [261186.916017] cache: parent cpu3 should not be sleeping [261186.916452] CPU3 is up [261186.923576] ACPI: Waking up from system sleep state S3 [261186.949358] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [261187.007890] PM: noirq resume of devices complete after 59.151 msecs [261187.025430] PM: early resume of devices complete after 17.459 msecs [261187.025824] rtc_cmos 00:03: System wakeup disabled by ACPI [261187.026113] r8169 0000:02:00.0: System wakeup disabled by ACPI [261187.027422] sd 0:0:0:0: [sda] Starting disk [261187.031145] [drm] GuC firmware load skipped [261187.046510] r8169 0000:02:00.0 enp2s0: link down [261187.091598] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [261187.110190] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [261187.128779] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [261187.340330] ata2: SATA link down (SStatus 4 SControl 300) [261187.340359] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [261187.344260] ata1.00: configured for UDMA/133 [261187.513212] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [261187.921150] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [261188.209163] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [261188.469154] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [261188.596987] [drm] RC6 on [261188.635430] PM: resume of devices complete after 1610.003 msecs [261188.635562] usb 1-5:1.0: rebind failed: -517 [261188.635563] usb 1-5:1.1: rebind failed: -517 [261188.635770] PM: Finishing wakeup. [261188.635771] Restarting tasks ... done. [261188.717508] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [261188.735228] r8169 0000:02:00.0 enp2s0: link down [261188.735355] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [261188.736117] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [261190.681461] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [261190.782667] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [261195.947566] vgaarb: this pci device is not a vga device [261195.953086] nvidia-modeset: Allocated GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [261195.953391] nvidia-modeset: Freed GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [261195.958976] vgaarb: this pci device is not a vga device [261200.115959] wlp3s0: authenticate with e0:3f:49:24:2c:94 [261200.144003] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [261200.144678] wlp3s0: authenticated [261200.148553] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [261200.150481] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [261200.152255] wlp3s0: associated [261200.152300] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [261200.156659] ath: EEPROM regdomain: 0x8114 [261200.156661] ath: EEPROM indicates we should expect a country code [261200.156661] ath: doing EEPROM country->regdmn map search [261200.156662] ath: country maps to regdmn code: 0x37 [261200.156663] ath: Country alpha2 being used: DE [261200.156663] ath: Regpair used: 0x37 [261200.156664] ath: regdomain 0x8114 dynamically updated by country IE [261200.162744] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [272335.688440] vgaarb: this pci device is not a vga device [284184.397864] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [284187.552046] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [284187.552058] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [284197.635011] PM: Syncing filesystems ... done. [284197.648285] PM: Preparing system for sleep (mem) [284197.648950] vgaarb: this pci device is not a vga device [284198.375938] Freezing user space processes ... (elapsed 0.002 seconds) done. [284198.378380] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [284198.378583] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [284198.379976] PM: Suspending system (mem) [284198.380006] Suspending console(s) (use no_console_suspend to debug) [284198.381018] sd 0:0:0:0: [sda] Synchronizing SCSI cache [284198.383723] sd 0:0:0:0: [sda] Stopping disk [284198.395768] tpm tpm0: A TPM error (325) occurred stopping the TPM [284199.673847] PM: suspend of devices complete after 1293.691 msecs [284199.691764] PM: late suspend of devices complete after 17.912 msecs [284199.693271] r8169 0000:02:00.0: System wakeup enabled by ACPI [284199.693960] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [284199.731749] PM: noirq suspend of devices complete after 39.977 msecs [284199.732997] ACPI: Preparing to enter system sleep state S3 [284199.734292] ACPI : EC: EC stopped [284199.734294] PM: Saving platform NVS memory [284199.734847] Disabling non-boot CPUs ... [284199.735936] Broke affinity for irq 127 [284199.738430] smpboot: CPU 1 is now offline [284199.765936] Broke affinity for irq 122 [284199.765943] Broke affinity for irq 123 [284199.765950] Broke affinity for irq 124 [284199.765958] Broke affinity for irq 125 [284199.765969] Broke affinity for irq 127 [284199.765976] Broke affinity for irq 128 [284199.765987] Broke affinity for irq 131 [284199.767188] smpboot: CPU 2 is now offline [284199.793422] Broke affinity for irq 1 [284199.793431] Broke affinity for irq 8 [284199.793438] Broke affinity for irq 9 [284199.793448] Broke affinity for irq 16 [284199.793460] Broke affinity for irq 82 [284199.793472] Broke affinity for irq 122 [284199.793479] Broke affinity for irq 123 [284199.793486] Broke affinity for irq 124 [284199.793493] Broke affinity for irq 125 [284199.793500] Broke affinity for irq 126 [284199.793508] Broke affinity for irq 127 [284199.793517] Broke affinity for irq 128 [284199.793524] Broke affinity for irq 130 [284199.793532] Broke affinity for irq 131 [284199.794691] smpboot: CPU 3 is now offline [284199.812294] ACPI: Low-level resume complete [284199.812409] ACPI : EC: EC started [284199.812409] PM: Restoring platform NVS memory [284199.814705] Enabling non-boot CPUs ... [284199.836149] x86: Booting SMP configuration: [284199.836149] smpboot: Booting Node 0 Processor 1 APIC 0x2 [284199.840040] cache: parent cpu1 should not be sleeping [284199.840236] CPU1 is up [284199.880307] smpboot: Booting Node 0 Processor 2 APIC 0x1 [284199.883466] cache: parent cpu2 should not be sleeping [284199.883907] CPU2 is up [284199.908377] smpboot: Booting Node 0 Processor 3 APIC 0x3 [284199.911464] cache: parent cpu3 should not be sleeping [284199.911953] CPU3 is up [284199.919116] ACPI: Waking up from system sleep state S3 [284199.944363] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [284200.009869] PM: noirq resume of devices complete after 65.681 msecs [284200.023032] PM: early resume of devices complete after 13.081 msecs [284200.023422] r8169 0000:02:00.0: System wakeup disabled by ACPI [284200.023911] rtc_cmos 00:03: System wakeup disabled by ACPI [284200.028966] sd 0:0:0:0: [sda] Starting disk [284200.028989] [drm] GuC firmware load skipped [284200.043552] r8169 0000:02:00.0 enp2s0: link down [284200.087725] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [284200.106662] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [284200.125234] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [284200.339926] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [284200.339953] ata2: SATA link down (SStatus 4 SControl 300) [284200.343530] ata1.00: configured for UDMA/133 [284200.364560] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [284200.772289] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [284201.180680] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [284201.440639] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [284201.444450] [drm] RC6 on [284201.601041] PM: resume of devices complete after 1578.015 msecs [284201.601113] usb 1-5:1.0: rebind failed: -517 [284201.601114] usb 1-5:1.1: rebind failed: -517 [284201.601348] PM: Finishing wakeup. [284201.601349] Restarting tasks ... done. [284202.709048] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [284202.726685] r8169 0000:02:00.0 enp2s0: link down [284202.726814] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [284202.727539] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [284204.663553] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [284204.733176] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [284214.054352] wlp3s0: authenticate with e0:3f:49:24:2c:94 [284214.082404] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [284214.083227] wlp3s0: authenticated [284214.084060] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [284214.085930] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=2) [284214.088371] wlp3s0: associated [284214.088461] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [284214.091435] ath: EEPROM regdomain: 0x8114 [284214.091437] ath: EEPROM indicates we should expect a country code [284214.091438] ath: doing EEPROM country->regdmn map search [284214.091438] ath: country maps to regdmn code: 0x37 [284214.091439] ath: Country alpha2 being used: DE [284214.091440] ath: Regpair used: 0x37 [284214.091441] ath: regdomain 0x8114 dynamically updated by country IE [284214.129006] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [284217.213974] vgaarb: this pci device is not a vga device [284217.216802] nvidia-modeset: Allocated GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [284217.216939] nvidia-modeset: Freed GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [284217.218713] vgaarb: this pci device is not a vga device [285826.003979] vgaarb: this pci device is not a vga device [286980.277828] vgaarb: this pci device is not a vga device [287766.834004] vgaarb: this pci device is not a vga device [291720.437910] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [291723.642803] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [291723.642812] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [291733.731817] PM: Syncing filesystems ... done. [291733.741052] PM: Preparing system for sleep (mem) [291733.743018] vgaarb: this pci device is not a vga device [291734.457679] Freezing user space processes ... (elapsed 0.002 seconds) done. [291734.460079] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [291734.460281] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [291734.461766] PM: Suspending system (mem) [291734.461796] Suspending console(s) (use no_console_suspend to debug) [291734.462512] sd 0:0:0:0: [sda] Synchronizing SCSI cache [291734.465212] sd 0:0:0:0: [sda] Stopping disk [291734.478723] tpm tpm0: A TPM error (325) occurred stopping the TPM [291735.752854] PM: suspend of devices complete after 1290.907 msecs [291735.774701] PM: late suspend of devices complete after 21.820 msecs [291735.776039] r8169 0000:02:00.0: System wakeup enabled by ACPI [291735.776616] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [291735.814688] PM: noirq suspend of devices complete after 39.981 msecs [291735.815729] ACPI: Preparing to enter system sleep state S3 [291735.816830] ACPI : EC: EC stopped [291735.816831] PM: Saving platform NVS memory [291735.817305] Disabling non-boot CPUs ... [291735.818108] Broke affinity for irq 126 [291735.818116] Broke affinity for irq 127 [291735.818123] Broke affinity for irq 128 [291735.819336] smpboot: CPU 1 is now offline [291735.836924] Broke affinity for irq 122 [291735.836933] Broke affinity for irq 123 [291735.836941] Broke affinity for irq 124 [291735.836954] Broke affinity for irq 126 [291735.836962] Broke affinity for irq 127 [291735.836971] Broke affinity for irq 128 [291735.836979] Broke affinity for irq 130 [291735.839505] smpboot: CPU 2 is now offline [291735.868519] Broke affinity for irq 1 [291735.868528] Broke affinity for irq 8 [291735.868536] Broke affinity for irq 9 [291735.868545] Broke affinity for irq 16 [291735.868558] Broke affinity for irq 82 [291735.868569] Broke affinity for irq 122 [291735.868576] Broke affinity for irq 123 [291735.868583] Broke affinity for irq 124 [291735.868591] Broke affinity for irq 125 [291735.868598] Broke affinity for irq 126 [291735.868606] Broke affinity for irq 127 [291735.868614] Broke affinity for irq 128 [291735.868622] Broke affinity for irq 130 [291735.868629] Broke affinity for irq 131 [291735.869771] smpboot: CPU 3 is now offline [291735.891196] ACPI: Low-level resume complete [291735.891310] ACPI : EC: EC started [291735.891310] PM: Restoring platform NVS memory [291735.893611] Enabling non-boot CPUs ... [291735.915093] x86: Booting SMP configuration: [291735.915094] smpboot: Booting Node 0 Processor 1 APIC 0x2 [291735.918988] cache: parent cpu1 should not be sleeping [291735.919184] CPU1 is up [291735.959257] smpboot: Booting Node 0 Processor 2 APIC 0x1 [291735.962381] cache: parent cpu2 should not be sleeping [291735.962815] CPU2 is up [291735.987370] smpboot: Booting Node 0 Processor 3 APIC 0x3 [291735.990545] cache: parent cpu3 should not be sleeping [291735.991106] CPU3 is up [291735.998972] ACPI: Waking up from system sleep state S3 [291736.023794] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [291736.132488] PM: noirq resume of devices complete after 109.357 msecs [291736.149996] PM: early resume of devices complete after 17.426 msecs [291736.150562] r8169 0000:02:00.0: System wakeup disabled by ACPI [291736.150978] rtc_cmos 00:03: System wakeup disabled by ACPI [291736.152255] sd 0:0:0:0: [sda] Starting disk [291736.155892] [drm] GuC firmware load skipped [291736.174423] r8169 0000:02:00.0 enp2s0: link down [291736.214321] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [291736.233286] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [291736.251766] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [291736.466850] ata2: SATA link down (SStatus 4 SControl 300) [291736.466878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [291736.470445] ata1.00: configured for UDMA/133 [291736.639582] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [291737.047569] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [291737.307660] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [291737.439407] [drm] RC6 on [291737.567277] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [291737.729428] PM: resume of devices complete after 1579.436 msecs [291737.729551] usb 1-5:1.0: rebind failed: -517 [291737.729552] usb 1-5:1.1: rebind failed: -517 [291737.729801] PM: Finishing wakeup. [291737.729801] Restarting tasks ... done. [291738.816095] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [291738.833707] r8169 0000:02:00.0 enp2s0: link down [291738.833842] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [291738.836113] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [291740.765153] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [291740.835878] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [291750.159203] wlp3s0: authenticate with e0:3f:49:24:2c:94 [291750.187630] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [291750.188168] wlp3s0: authenticated [291750.191037] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [291750.192969] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=2) [291750.195113] wlp3s0: associated [291750.195157] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [291750.198078] ath: EEPROM regdomain: 0x8114 [291750.198079] ath: EEPROM indicates we should expect a country code [291750.198080] ath: doing EEPROM country->regdmn map search [291750.198081] ath: country maps to regdmn code: 0x37 [291750.198082] ath: Country alpha2 being used: DE [291750.198082] ath: Regpair used: 0x37 [291750.198083] ath: regdomain 0x8114 dynamically updated by country IE [291750.235553] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [292284.014065] vgaarb: this pci device is not a vga device [297510.807514] vgaarb: this pci device is not a vga device [298013.276933] vgaarb: this pci device is not a vga device [298513.256107] vgaarb: this pci device is not a vga device [299710.235227] vgaarb: this pci device is not a vga device [299710.252526] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [299713.367790] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [299713.367802] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [299713.415607] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [299713.415771] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [299723.489181] PM: Syncing filesystems ... done. [299723.506321] PM: Preparing system for sleep (mem) [299723.506973] vgaarb: this pci device is not a vga device [299724.219188] Freezing user space processes ... (elapsed 0.002 seconds) done. [299724.221769] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [299724.222170] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [299724.224132] PM: Suspending system (mem) [299724.224195] Suspending console(s) (use no_console_suspend to debug) [299724.225523] sd 0:0:0:0: [sda] Synchronizing SCSI cache [299724.228241] sd 0:0:0:0: [sda] Stopping disk [299724.243726] tpm tpm0: A TPM error (325) occurred stopping the TPM [299725.509958] PM: suspend of devices complete after 1285.424 msecs [299725.531864] PM: late suspend of devices complete after 21.897 msecs [299725.532883] r8169 0000:02:00.0: System wakeup enabled by ACPI [299725.533608] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [299725.571773] PM: noirq suspend of devices complete after 39.901 msecs [299725.572813] ACPI: Preparing to enter system sleep state S3 [299725.573903] ACPI : EC: EC stopped [299725.573904] PM: Saving platform NVS memory [299725.574382] Disabling non-boot CPUs ... [299725.575228] Broke affinity for irq 127 [299725.576442] smpboot: CPU 1 is now offline [299725.593940] Broke affinity for irq 122 [299725.593948] Broke affinity for irq 123 [299725.593955] Broke affinity for irq 124 [299725.593963] Broke affinity for irq 125 [299725.593971] Broke affinity for irq 126 [299725.593980] Broke affinity for irq 127 [299725.593989] Broke affinity for irq 128 [299725.594003] Broke affinity for irq 131 [299725.596521] smpboot: CPU 2 is now offline [299725.625508] Broke affinity for irq 1 [299725.625516] Broke affinity for irq 8 [299725.625524] Broke affinity for irq 9 [299725.625533] Broke affinity for irq 16 [299725.625545] Broke affinity for irq 82 [299725.625556] Broke affinity for irq 122 [299725.625563] Broke affinity for irq 123 [299725.625568] Broke affinity for irq 124 [299725.625576] Broke affinity for irq 125 [299725.625583] Broke affinity for irq 126 [299725.625591] Broke affinity for irq 127 [299725.625599] Broke affinity for irq 128 [299725.625607] Broke affinity for irq 130 [299725.625614] Broke affinity for irq 131 [299725.626756] smpboot: CPU 3 is now offline [299725.648186] ACPI: Low-level resume complete [299725.648300] ACPI : EC: EC started [299725.648301] PM: Restoring platform NVS memory [299725.650597] Enabling non-boot CPUs ... [299725.672183] x86: Booting SMP configuration: [299725.672184] smpboot: Booting Node 0 Processor 1 APIC 0x2 [299725.676080] cache: parent cpu1 should not be sleeping [299725.676274] CPU1 is up [299725.720348] smpboot: Booting Node 0 Processor 2 APIC 0x1 [299725.723482] cache: parent cpu2 should not be sleeping [299725.723910] CPU2 is up [299725.748426] smpboot: Booting Node 0 Processor 3 APIC 0x3 [299725.751510] cache: parent cpu3 should not be sleeping [299725.751979] CPU3 is up [299725.759141] ACPI: Waking up from system sleep state S3 [299725.784917] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [299725.846809] PM: noirq resume of devices complete after 62.570 msecs [299725.864853] PM: early resume of devices complete after 17.962 msecs [299725.865169] rtc_cmos 00:03: System wakeup disabled by ACPI [299725.865199] r8169 0000:02:00.0: System wakeup disabled by ACPI [299725.870388] [drm] GuC firmware load skipped [299725.872439] sd 0:0:0:0: [sda] Starting disk [299725.883973] r8169 0000:02:00.0 enp2s0: link down [299725.932367] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [299725.951063] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [299725.969724] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [299726.188045] ata2: SATA link down (SStatus 4 SControl 300) [299726.188074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [299726.191938] ata1.00: configured for UDMA/133 [299726.208695] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [299726.616518] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [299727.044684] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [299727.304589] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [299727.420564] [drm] RC6 on [299727.446685] PM: resume of devices complete after 1581.820 msecs [299727.446897] usb 1-5:1.0: rebind failed: -517 [299727.446903] usb 1-5:1.1: rebind failed: -517 [299727.447571] PM: Finishing wakeup. [299727.447573] Restarting tasks ... done. [299728.579633] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [299728.598827] r8169 0000:02:00.0 enp2s0: link down [299728.598946] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [299728.601097] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [299730.531355] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [299730.629663] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [299739.975161] wlp3s0: authenticate with e0:3f:49:24:2c:94 [299740.004316] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [299740.004920] wlp3s0: authenticated [299740.008502] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [299740.010446] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [299740.016354] wlp3s0: associated [299740.016423] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [299740.021440] ath: EEPROM regdomain: 0x8114 [299740.021441] ath: EEPROM indicates we should expect a country code [299740.021443] ath: doing EEPROM country->regdmn map search [299740.021444] ath: country maps to regdmn code: 0x37 [299740.021445] ath: Country alpha2 being used: DE [299740.021446] ath: Regpair used: 0x37 [299740.021447] ath: regdomain 0x8114 dynamically updated by country IE [299740.066813] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [300264.418816] vgaarb: this pci device is not a vga device [301093.657246] vgaarb: this pci device is not a vga device [306218.593219] vgaarb: this pci device is not a vga device [306860.409203] vgaarb: this pci device is not a vga device [307307.952806] vgaarb: this pci device is not a vga device [321245.465514] vgaarb: this pci device is not a vga device [321820.588147] vgaarb: this pci device is not a vga device [321989.721154] vgaarb: this pci device is not a vga device [322300.286733] vgaarb: this pci device is not a vga device [324042.867313] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [324046.052596] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [324046.052609] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [324056.141466] PM: Syncing filesystems ... done. [324056.150786] PM: Preparing system for sleep (mem) [324056.151518] vgaarb: this pci device is not a vga device [324056.895305] Freezing user space processes ... (elapsed 0.002 seconds) done. [324056.897715] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [324056.897905] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [324056.899575] PM: Suspending system (mem) [324056.899637] Suspending console(s) (use no_console_suspend to debug) [324056.900818] sd 0:0:0:0: [sda] Synchronizing SCSI cache [324056.903543] sd 0:0:0:0: [sda] Stopping disk [324056.916398] tpm tpm0: A TPM error (325) occurred stopping the TPM [324058.194603] PM: suspend of devices complete after 1294.653 msecs [324058.212505] PM: late suspend of devices complete after 17.896 msecs [324058.213756] r8169 0000:02:00.0: System wakeup enabled by ACPI [324058.214371] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [324058.252456] PM: noirq suspend of devices complete after 39.943 msecs [324058.253704] ACPI: Preparing to enter system sleep state S3 [324058.255008] ACPI : EC: EC stopped [324058.255010] PM: Saving platform NVS memory [324058.255560] Disabling non-boot CPUs ... [324058.256471] Broke affinity for irq 127 [324058.257793] smpboot: CPU 1 is now offline [324058.274590] Broke affinity for irq 122 [324058.274599] Broke affinity for irq 123 [324058.274606] Broke affinity for irq 124 [324058.274614] Broke affinity for irq 125 [324058.274622] Broke affinity for irq 126 [324058.274631] Broke affinity for irq 127 [324058.274640] Broke affinity for irq 128 [324058.274653] Broke affinity for irq 131 [324058.277175] smpboot: CPU 2 is now offline [324058.302185] Broke affinity for irq 1 [324058.302194] Broke affinity for irq 8 [324058.302201] Broke affinity for irq 9 [324058.302210] Broke affinity for irq 16 [324058.302223] Broke affinity for irq 82 [324058.302234] Broke affinity for irq 122 [324058.302241] Broke affinity for irq 123 [324058.302246] Broke affinity for irq 124 [324058.302254] Broke affinity for irq 125 [324058.302261] Broke affinity for irq 126 [324058.302268] Broke affinity for irq 127 [324058.302277] Broke affinity for irq 128 [324058.302285] Broke affinity for irq 130 [324058.302292] Broke affinity for irq 131 [324058.303435] smpboot: CPU 3 is now offline [324058.324899] ACPI: Low-level resume complete [324058.325014] ACPI : EC: EC started [324058.325014] PM: Restoring platform NVS memory [324058.327331] Enabling non-boot CPUs ... [324058.348845] x86: Booting SMP configuration: [324058.348846] smpboot: Booting Node 0 Processor 1 APIC 0x2 [324058.352737] cache: parent cpu1 should not be sleeping [324058.352928] CPU1 is up [324058.393010] smpboot: Booting Node 0 Processor 2 APIC 0x1 [324058.396169] cache: parent cpu2 should not be sleeping [324058.396592] CPU2 is up [324058.421085] smpboot: Booting Node 0 Processor 3 APIC 0x3 [324058.424171] cache: parent cpu3 should not be sleeping [324058.424638] CPU3 is up [324058.431806] ACPI: Waking up from system sleep state S3 [324058.457079] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [324058.516342] PM: noirq resume of devices complete after 59.443 msecs [324058.536079] PM: early resume of devices complete after 19.655 msecs [324058.536712] r8169 0000:02:00.0: System wakeup disabled by ACPI [324058.537107] rtc_cmos 00:03: System wakeup disabled by ACPI [324058.539562] sd 0:0:0:0: [sda] Starting disk [324058.541799] [drm] GuC firmware load skipped [324058.556691] r8169 0000:02:00.0 enp2s0: link down [324058.603425] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [324058.621718] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [324058.640147] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [324058.852527] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [324058.852604] ata2: SATA link down (SStatus 4 SControl 300) [324058.856007] ata1.00: configured for UDMA/133 [324058.877269] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [324059.285289] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [324059.697432] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [324059.973377] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [324060.117365] PM: resume of devices complete after 1581.284 msecs [324060.117693] usb 1-5:1.0: rebind failed: -517 [324060.117701] usb 1-5:1.1: rebind failed: -517 [324060.118446] PM: Finishing wakeup. [324060.118449] Restarting tasks ... done. [324060.264869] [drm] RC6 on [324061.257746] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [324061.275513] r8169 0000:02:00.0 enp2s0: link down [324061.275659] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [324061.276349] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [324063.209883] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [324063.289162] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [324072.626403] wlp3s0: authenticate with e0:3f:49:24:2c:94 [324072.654772] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [324072.655324] wlp3s0: authenticated [324072.656677] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [324072.658541] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [324072.665006] wlp3s0: associated [324072.665055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [324072.668819] ath: EEPROM regdomain: 0x8114 [324072.668821] ath: EEPROM indicates we should expect a country code [324072.668821] ath: doing EEPROM country->regdmn map search [324072.668822] ath: country maps to regdmn code: 0x37 [324072.668822] ath: Country alpha2 being used: DE [324072.668823] ath: Regpair used: 0x37 [324072.668826] ath: regdomain 0x8114 dynamically updated by country IE [324072.690923] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [325799.845593] vgaarb: this pci device is not a vga device [326023.510155] vgaarb: this pci device is not a vga device [327544.295965] vgaarb: this pci device is not a vga device [329133.982158] vgaarb: this pci device is not a vga device [331209.603586] vgaarb: this pci device is not a vga device [331422.110040] vgaarb: this pci device is not a vga device [332542.603131] vgaarb: this pci device is not a vga device [333000.941854] vgaarb: this pci device is not a vga device [333559.771851] vgaarb: this pci device is not a vga device [336386.398000] vgaarb: this pci device is not a vga device [336830.670488] vgaarb: this pci device is not a vga device [341977.062740] vgaarb: this pci device is not a vga device [342473.968431] vgaarb: this pci device is not a vga device [342830.686075] vgaarb: this pci device is not a vga device [343910.587534] vgaarb: this pci device is not a vga device [383858.958377] vgaarb: this pci device is not a vga device [385834.833166] audit_printk_skb: 60 callbacks suppressed [385834.833168] audit: type=1400 audit(1485250481.823:31): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=20965 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 [386168.262177] vgaarb: this pci device is not a vga device [409388.830168] vgaarb: this pci device is not a vga device [410401.484249] vgaarb: this pci device is not a vga device [411355.189361] vgaarb: this pci device is not a vga device [411946.310111] vgaarb: this pci device is not a vga device [414198.869104] vgaarb: this pci device is not a vga device [414575.617961] vgaarb: this pci device is not a vga device [418425.573370] vgaarb: this pci device is not a vga device [418816.384680] audit: type=1400 audit(1485283463.546:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=25324 comm="apparmor_parser" [418816.384945] audit: type=1400 audit(1485283463.550:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=25324 comm="apparmor_parser" [418816.385215] audit: type=1400 audit(1485283463.550:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=25324 comm="apparmor_parser" [418816.385528] audit: type=1400 audit(1485283463.550:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=25324 comm="apparmor_parser" [419277.995470] vgaarb: this pci device is not a vga device [497963.005091] vgaarb: this pci device is not a vga device [499147.646427] vgaarb: this pci device is not a vga device [500581.213866] vgaarb: this pci device is not a vga device [501401.442244] vgaarb: this pci device is not a vga device [503485.101157] vgaarb: this pci device is not a vga device [504451.620544] vgaarb: this pci device is not a vga device [514475.829753] vgaarb: this pci device is not a vga device [516029.286919] vgaarb: this pci device is not a vga device [583679.829351] vgaarb: this pci device is not a vga device [584506.778220] vgaarb: this pci device is not a vga device [586602.773075] vgaarb: this pci device is not a vga device [588388.039802] vgaarb: this pci device is not a vga device [594538.253656] vgaarb: this pci device is not a vga device [594926.460565] vgaarb: this pci device is not a vga device [595998.085679] vgaarb: this pci device is not a vga device [596668.759720] vgaarb: this pci device is not a vga device [596698.405247] vgaarb: this pci device is not a vga device [598563.189035] vgaarb: this pci device is not a vga device [662337.002158] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [662340.108042] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [662340.108052] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [662340.115890] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [662340.181963] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [662350.261288] PM: Syncing filesystems ... done. [662350.296831] PM: Preparing system for sleep (mem) [662350.297585] vgaarb: this pci device is not a vga device [662351.059656] Freezing user space processes ... (elapsed 0.002 seconds) done. [662351.062120] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [662351.062341] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [662351.063853] PM: Suspending system (mem) [662351.063883] Suspending console(s) (use no_console_suspend to debug) [662351.064806] sd 0:0:0:0: [sda] Synchronizing SCSI cache [662351.067538] sd 0:0:0:0: [sda] Stopping disk [662351.079794] tpm tpm0: A TPM error (325) occurred stopping the TPM [662352.345924] PM: suspend of devices complete after 1281.869 msecs [662352.363859] PM: late suspend of devices complete after 17.928 msecs [662352.365118] r8169 0000:02:00.0: System wakeup enabled by ACPI [662352.365798] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [662352.403780] PM: noirq suspend of devices complete after 39.913 msecs [662352.404820] ACPI: Preparing to enter system sleep state S3 [662352.405959] ACPI : EC: EC stopped [662352.405961] PM: Saving platform NVS memory [662352.406437] Disabling non-boot CPUs ... [662352.407285] Broke affinity for irq 127 [662352.407302] Broke affinity for irq 131 [662352.409731] smpboot: CPU 1 is now offline [662352.425926] Broke affinity for irq 122 [662352.425934] Broke affinity for irq 123 [662352.425942] Broke affinity for irq 124 [662352.425949] Broke affinity for irq 125 [662352.425958] Broke affinity for irq 126 [662352.425966] Broke affinity for irq 127 [662352.425975] Broke affinity for irq 128 [662352.425988] Broke affinity for irq 131 [662352.427196] smpboot: CPU 2 is now offline [662352.453428] Broke affinity for irq 1 [662352.453438] Broke affinity for irq 8 [662352.453445] Broke affinity for irq 9 [662352.453455] Broke affinity for irq 16 [662352.453467] Broke affinity for irq 82 [662352.453478] Broke affinity for irq 122 [662352.453484] Broke affinity for irq 123 [662352.453491] Broke affinity for irq 124 [662352.453498] Broke affinity for irq 125 [662352.453506] Broke affinity for irq 126 [662352.453514] Broke affinity for irq 127 [662352.453522] Broke affinity for irq 128 [662352.453530] Broke affinity for irq 130 [662352.453538] Broke affinity for irq 131 [662352.454696] smpboot: CPU 3 is now offline [662352.472298] ACPI: Low-level resume complete [662352.472413] ACPI : EC: EC started [662352.472414] PM: Restoring platform NVS memory [662352.474713] Enabling non-boot CPUs ... [662352.496192] x86: Booting SMP configuration: [662352.496193] smpboot: Booting Node 0 Processor 1 APIC 0x2 [662352.500086] cache: parent cpu1 should not be sleeping [662352.500283] CPU1 is up [662352.540359] smpboot: Booting Node 0 Processor 2 APIC 0x1 [662352.543481] cache: parent cpu2 should not be sleeping [662352.543903] CPU2 is up [662352.568432] smpboot: Booting Node 0 Processor 3 APIC 0x3 [662352.571514] cache: parent cpu3 should not be sleeping [662352.571989] CPU3 is up [662352.579156] ACPI: Waking up from system sleep state S3 [662352.604441] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [662352.663281] PM: noirq resume of devices complete after 59.033 msecs [662352.680607] PM: early resume of devices complete after 17.244 msecs [662352.681000] r8169 0000:02:00.0: System wakeup disabled by ACPI [662352.681559] rtc_cmos 00:03: System wakeup disabled by ACPI [662352.681693] sd 0:0:0:0: [sda] Starting disk [662352.686326] [drm] GuC firmware load skipped [662352.702087] r8169 0000:02:00.0 enp2s0: link down [662352.747501] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [662352.765622] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [662352.783553] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [662352.995927] ata2: SATA link down (SStatus 4 SControl 300) [662352.995978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [662353.000194] ata1.00: configured for UDMA/133 [662353.168683] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [662353.576706] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [662353.836724] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [662354.000476] [drm] RC6 on [662354.096378] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [662354.264098] PM: resume of devices complete after 1583.494 msecs [662354.264229] usb 1-5:1.0: rebind failed: -517 [662354.264231] usb 1-5:1.1: rebind failed: -517 [662354.264477] PM: Finishing wakeup. [662354.264478] Restarting tasks ... done. [662355.317870] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [662355.338923] r8169 0000:02:00.0 enp2s0: link down [662355.341622] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [662355.342533] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [662357.276854] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [662357.343222] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [662357.601870] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [662357.704717] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [662366.666088] wlp3s0: authenticate with e0:3f:49:24:2c:94 [662366.696194] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [662366.696791] wlp3s0: authenticated [662366.700070] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [662366.703523] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [662366.708165] wlp3s0: associated [662366.708263] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [662366.712982] ath: EEPROM regdomain: 0x8114 [662366.712983] ath: EEPROM indicates we should expect a country code [662366.712984] ath: doing EEPROM country->regdmn map search [662366.712985] ath: country maps to regdmn code: 0x37 [662366.712986] ath: Country alpha2 being used: DE [662366.712987] ath: Regpair used: 0x37 [662366.712988] ath: regdomain 0x8114 dynamically updated by country IE [662366.820754] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [663329.134344] vgaarb: this pci device is not a vga device [706040.789255] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [706043.847501] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [706043.847510] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [706053.953217] PM: Syncing filesystems ... done. [706053.959548] PM: Preparing system for sleep (mem) [706053.960198] vgaarb: this pci device is not a vga device [706065.449523] Freezing user space processes ... (elapsed 0.005 seconds) done. [706065.455505] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [706065.456137] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [706065.458519] PM: Suspending system (mem) [706065.458607] Suspending console(s) (use no_console_suspend to debug) [706065.477533] sd 0:0:0:0: [sda] Synchronizing SCSI cache [706065.480284] sd 0:0:0:0: [sda] Stopping disk [706065.499556] tpm tpm0: A TPM error (325) occurred stopping the TPM [706066.741609] PM: suspend of devices complete after 1265.537 msecs [706066.763583] PM: late suspend of devices complete after 21.965 msecs [706066.764919] r8169 0000:02:00.0: System wakeup enabled by ACPI [706066.765829] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [706066.803500] PM: noirq suspend of devices complete after 39.908 msecs [706066.804760] ACPI: Preparing to enter system sleep state S3 [706066.806063] ACPI : EC: EC stopped [706066.806065] PM: Saving platform NVS memory [706066.806618] Disabling non-boot CPUs ... [706066.807576] Broke affinity for irq 126 [706066.807585] Broke affinity for irq 127 [706066.808846] smpboot: CPU 1 is now offline [706066.837647] Broke affinity for irq 122 [706066.837655] Broke affinity for irq 123 [706066.837663] Broke affinity for irq 124 [706066.837669] Broke affinity for irq 125 [706066.837675] Broke affinity for irq 126 [706066.837681] Broke affinity for irq 127 [706066.837689] Broke affinity for irq 128 [706066.837701] Broke affinity for irq 131 [706066.840223] smpboot: CPU 2 is now offline [706066.865266] Broke affinity for irq 1 [706066.865275] Broke affinity for irq 8 [706066.865282] Broke affinity for irq 9 [706066.865292] Broke affinity for irq 16 [706066.865304] Broke affinity for irq 82 [706066.865316] Broke affinity for irq 122 [706066.865323] Broke affinity for irq 123 [706066.865330] Broke affinity for irq 124 [706066.865337] Broke affinity for irq 125 [706066.865345] Broke affinity for irq 126 [706066.865353] Broke affinity for irq 127 [706066.865361] Broke affinity for irq 128 [706066.865369] Broke affinity for irq 130 [706066.865377] Broke affinity for irq 131 [706066.866523] smpboot: CPU 3 is now offline [706066.887922] ACPI: Low-level resume complete [706066.888037] ACPI : EC: EC started [706066.888038] PM: Restoring platform NVS memory [706066.890326] Enabling non-boot CPUs ... [706066.911886] x86: Booting SMP configuration: [706066.911887] smpboot: Booting Node 0 Processor 1 APIC 0x2 [706066.915778] cache: parent cpu1 should not be sleeping [706066.915974] CPU1 is up [706066.960053] smpboot: Booting Node 0 Processor 2 APIC 0x1 [706066.963190] cache: parent cpu2 should not be sleeping [706066.963621] CPU2 is up [706066.988127] smpboot: Booting Node 0 Processor 3 APIC 0x3 [706066.991211] cache: parent cpu3 should not be sleeping [706066.991687] CPU3 is up [706066.998820] ACPI: Waking up from system sleep state S3 [706067.024128] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [706067.083559] PM: noirq resume of devices complete after 59.610 msecs [706067.103265] PM: early resume of devices complete after 19.599 msecs [706067.103594] r8169 0000:02:00.0: System wakeup disabled by ACPI [706067.104166] rtc_cmos 00:03: System wakeup disabled by ACPI [706067.107763] sd 0:0:0:0: [sda] Starting disk [706067.109978] [drm] GuC firmware load skipped [706067.124276] r8169 0000:02:00.0 enp2s0: link down [706067.174759] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [706067.193209] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [706067.211686] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [706067.419581] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [706067.419609] ata2: SATA link down (SStatus 4 SControl 300) [706067.424188] ata1.00: configured for UDMA/133 [706067.596348] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [706068.020491] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [706068.236223] [drm] RC6 on [706068.280065] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [706068.540387] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [706068.701836] PM: resume of devices complete after 1598.562 msecs [706068.701967] usb 1-5:1.0: rebind failed: -517 [706068.701969] usb 1-5:1.1: rebind failed: -517 [706068.702210] PM: Finishing wakeup. [706068.702211] Restarting tasks ... done. [706069.836932] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [706069.854477] r8169 0000:02:00.0 enp2s0: link down [706069.854609] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [706069.855384] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [706071.787439] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [706071.860244] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [706081.211255] wlp3s0: authenticate with e0:3f:49:24:2c:94 [706081.239471] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [706081.241104] wlp3s0: authenticated [706081.243920] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [706081.245947] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [706081.248006] wlp3s0: associated [706081.248143] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [706081.252051] ath: EEPROM regdomain: 0x8114 [706081.252053] ath: EEPROM indicates we should expect a country code [706081.252054] ath: doing EEPROM country->regdmn map search [706081.252055] ath: country maps to regdmn code: 0x37 [706081.252056] ath: Country alpha2 being used: DE [706081.252057] ath: Regpair used: 0x37 [706081.252059] ath: regdomain 0x8114 dynamically updated by country IE [706081.263179] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [708032.664142] vgaarb: this pci device is not a vga device [708147.862121] vgaarb: this pci device is not a vga device [708743.016755] vgaarb: this pci device is not a vga device [709243.509340] vgaarb: this pci device is not a vga device [709909.727673] audit: type=1400 audit(1485601653.292:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=12440 comm="apparmor_parser" [709909.741650] audit: type=1400 audit(1485601653.308:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=12440 comm="apparmor_parser" [710200.043838] vgaarb: this pci device is not a vga device [711098.846168] vgaarb: this pci device is not a vga device [712237.160091] vgaarb: this pci device is not a vga device [713061.470372] vgaarb: this pci device is not a vga device [713189.558323] plugin-containe[13133]: segfault at 968 ip 00007f9d651d392c sp 00007ffc083de760 error 4 in libX11.so.6.3.0[7f9d651b3000+135000] [713189.755347] plugin-containe[13139]: segfault at 968 ip 00007feffdecc92c sp 00007fff10da5420 error 4 in libX11.so.6.3.0[7feffdeac000+135000] [713189.987992] plugin-containe[13148]: segfault at 968 ip 00007f2185bd992c sp 00007ffc2154cee0 error 4 in libX11.so.6.3.0[7f2185bb9000+135000] [713190.430753] plugin-containe[13163]: segfault at 968 ip 00007f1766e6692c sp 00007ffe31a63600 error 4 in libX11.so.6.3.0[7f1766e46000+135000] [713190.858357] plugin-containe[13187]: segfault at 968 ip 00007f688400492c sp 00007ffcec7b02c0 error 4 in libX11.so.6.3.0[7f6883fe4000+135000] [713191.342471] plugin-containe[13201]: segfault at 968 ip 00007f98dc9b592c sp 00007fff43f41410 error 4 in libX11.so.6.3.0[7f98dc995000+135000] [713191.566172] plugin-containe[13212]: segfault at 968 ip 00007f198a14792c sp 00007ffd1037fb90 error 4 in libX11.so.6.3.0[7f198a127000+135000] [713191.827694] plugin-containe[13221]: segfault at 968 ip 00007f562ec5c92c sp 00007ffde25b4db0 error 4 in libX11.so.6.3.0[7f562ec3c000+135000] [713192.031961] plugin-containe[13232]: segfault at 968 ip 00007fb41271992c sp 00007ffc16fe01c0 error 4 in libX11.so.6.3.0[7fb4126f9000+135000] [713192.233327] plugin-containe[13239]: segfault at 968 ip 00007fa03575292c sp 00007ffe45ac03c0 error 4 in libX11.so.6.3.0[7fa035732000+135000] [713194.770025] show_signal_msg: 11 callbacks suppressed [713194.770028] plugin-containe[13323]: segfault at 968 ip 00007fa97225592c sp 00007ffe8d36e2a0 error 4 in libX11.so.6.3.0[7fa972235000+135000] [713195.015276] plugin-containe[13330]: segfault at 968 ip 00007f5d9d54792c sp 00007ffeec443500 error 4 in libX11.so.6.3.0[7f5d9d527000+135000] [713195.261337] plugin-containe[13337]: segfault at 968 ip 00007f5d9fa7a92c sp 00007ffd471c36e0 error 4 in libX11.so.6.3.0[7f5d9fa5a000+135000] [713195.497052] plugin-containe[13344]: segfault at 968 ip 00007f1c5411092c sp 00007fff2ed9aad0 error 4 in libX11.so.6.3.0[7f1c540f0000+135000] [713195.739534] plugin-containe[13351]: segfault at 968 ip 00007f415655992c sp 00007fff340a5a40 error 4 in libX11.so.6.3.0[7f4156539000+135000] [713195.962900] plugin-containe[13358]: segfault at 968 ip 00007fc371d8e92c sp 00007fff1937cef0 error 4 in libX11.so.6.3.0[7fc371d6e000+135000] [713196.160470] plugin-containe[13365]: segfault at 968 ip 00007f8cc009e92c sp 00007fffa01e66f0 error 4 in libX11.so.6.3.0[7f8cc007e000+135000] [713196.369067] plugin-containe[13372]: segfault at 968 ip 00007f9a4648092c sp 00007ffcebc096c0 error 4 in libX11.so.6.3.0[7f9a46460000+135000] [713196.583914] plugin-containe[13379]: segfault at 968 ip 00007f495906692c sp 00007ffc6e12f3d0 error 4 in libX11.so.6.3.0[7f4959046000+135000] [713196.770153] plugin-containe[13386]: segfault at 968 ip 00007f5c50c5b92c sp 00007ffeb6147d10 error 4 in libX11.so.6.3.0[7f5c50c3b000+135000] [713199.925150] show_signal_msg: 13 callbacks suppressed [713199.925153] plugin-containe[13495]: segfault at 968 ip 00007fbb8603392c sp 00007fffd3865020 error 4 in libX11.so.6.3.0[7fbb86013000+135000] [713200.194187] plugin-containe[13504]: segfault at 968 ip 00007fc7bff4d92c sp 00007ffe390d1680 error 4 in libX11.so.6.3.0[7fc7bff2d000+135000] [713200.329134] plugin-containe[13514]: segfault at 968 ip 00007ff44a34e92c sp 00007ffe8b8773a0 error 4 in libX11.so.6.3.0[7ff44a32e000+135000] [713200.667840] plugin-containe[13525]: segfault at 968 ip 00007f45fce9c92c sp 00007ffc92b8bac0 error 4 in libX11.so.6.3.0[7f45fce7c000+135000] [713200.889633] plugin-containe[13533]: segfault at 968 ip 00007f6a2b3d992c sp 00007ffeb4d0ea50 error 4 in libX11.so.6.3.0[7f6a2b3b9000+135000] [713201.146727] plugin-containe[13545]: segfault at 968 ip 00007f0757e1492c sp 00007ffdc4c92b90 error 4 in libX11.so.6.3.0[7f0757df4000+135000] [713201.474217] plugin-containe[13558]: segfault at 968 ip 00007f28df0dc92c sp 00007fff90e78f40 error 4 in libX11.so.6.3.0[7f28df0bc000+135000] [713201.809930] plugin-containe[13571]: segfault at 968 ip 00007f1f42adf92c sp 00007ffee84418c0 error 4 in libX11.so.6.3.0[7f1f42abf000+135000] [713202.114886] plugin-containe[13587]: segfault at 968 ip 00007f29520ad92c sp 00007ffdfe77dab0 error 4 in libX11.so.6.3.0[7f295208d000+135000] [713202.394223] plugin-containe[13597]: segfault at 968 ip 00007f16f220f92c sp 00007ffe33e35b10 error 4 in libX11.so.6.3.0[7f16f21ef000+135000] [713205.102664] show_signal_msg: 13 callbacks suppressed [713205.102667] plugin-containe[13698]: segfault at 968 ip 00007fda4fb5a92c sp 00007fffc78f39e0 error 4 in libX11.so.6.3.0[7fda4fb3a000+135000] [713205.289337] plugin-containe[13705]: segfault at 968 ip 00007fa58f5a192c sp 00007ffebe8784b0 error 4 in libX11.so.6.3.0[7fa58f581000+135000] [713205.497771] plugin-containe[13712]: segfault at 968 ip 00007f6d0afb792c sp 00007ffd3653e490 error 4 in libX11.so.6.3.0[7f6d0af97000+135000] [713205.698103] plugin-containe[13719]: segfault at 968 ip 00007f375fa3c92c sp 00007ffd78ba49e0 error 4 in libX11.so.6.3.0[7f375fa1c000+135000] [713205.899974] plugin-containe[13726]: segfault at 968 ip 00007f9a3ef1592c sp 00007ffcfd966d50 error 4 in libX11.so.6.3.0[7f9a3eef5000+135000] [713206.118235] plugin-containe[13733]: segfault at 968 ip 00007f151c06d92c sp 00007ffd62490a20 error 4 in libX11.so.6.3.0[7f151c04d000+135000] [713526.150458] vgaarb: this pci device is not a vga device [715430.582037] vgaarb: this pci device is not a vga device [716276.608241] vgaarb: this pci device is not a vga device [716339.381974] vgaarb: this pci device is not a vga device [720241.809268] vgaarb: this pci device is not a vga device [720691.397627] vgaarb: this pci device is not a vga device [722150.345767] vgaarb: this pci device is not a vga device [723143.845847] vgaarb: this pci device is not a vga device [723846.858470] vgaarb: this pci device is not a vga device [723946.342147] vgaarb: this pci device is not a vga device [724639.372275] vgaarb: this pci device is not a vga device [730031.901932] vgaarb: this pci device is not a vga device [730918.103354] vgaarb: this pci device is not a vga device [731071.030251] vgaarb: this pci device is not a vga device [731469.833857] audit: type=1400 audit(1485623213.469:38): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=923 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 [733134.096075] vgaarb: this pci device is not a vga device [734150.173205] vgaarb: this pci device is not a vga device [734897.493101] vgaarb: this pci device is not a vga device [735135.845441] vgaarb: this pci device is not a vga device [735961.290156] vgaarb: this pci device is not a vga device [736622.133604] vgaarb: this pci device is not a vga device [736934.648277] vgaarb: this pci device is not a vga device [751389.030345] vgaarb: this pci device is not a vga device [751823.578748] vgaarb: this pci device is not a vga device [754188.774044] vgaarb: this pci device is not a vga device [754677.204507] vgaarb: this pci device is not a vga device [797398.302206] vgaarb: this pci device is not a vga device [797727.600315] vgaarb: this pci device is not a vga device [798130.133874] vgaarb: this pci device is not a vga device [799617.810302] vgaarb: this pci device is not a vga device [800571.286368] vgaarb: this pci device is not a vga device [801401.523675] vgaarb: this pci device is not a vga device [801724.773905] vgaarb: this pci device is not a vga device [803232.671076] vgaarb: this pci device is not a vga device [806818.083137] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [806821.215085] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [806821.215088] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [806831.317472] PM: Syncing filesystems ... done. [806831.328394] PM: Preparing system for sleep (mem) [806831.329199] vgaarb: this pci device is not a vga device [806832.074194] Freezing user space processes ... (elapsed 0.002 seconds) done. [806832.076653] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [806832.076850] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [806832.078338] PM: Suspending system (mem) [806832.078369] Suspending console(s) (use no_console_suspend to debug) [806832.079161] sd 0:0:0:0: [sda] Synchronizing SCSI cache [806832.081871] sd 0:0:0:0: [sda] Stopping disk [806832.095067] tpm tpm0: A TPM error (325) occurred stopping the TPM [806833.357181] PM: suspend of devices complete after 1278.659 msecs [806833.375115] PM: late suspend of devices complete after 17.927 msecs [806833.376157] r8169 0000:02:00.0: System wakeup enabled by ACPI [806833.376901] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [806833.415056] PM: noirq suspend of devices complete after 39.935 msecs [806833.416097] ACPI: Preparing to enter system sleep state S3 [806833.417187] ACPI : EC: EC stopped [806833.417188] PM: Saving platform NVS memory [806833.417664] Disabling non-boot CPUs ... [806833.418530] Broke affinity for irq 126 [806833.418539] Broke affinity for irq 127 [806833.419808] smpboot: CPU 1 is now offline [806833.437235] Broke affinity for irq 122 [806833.437244] Broke affinity for irq 123 [806833.437251] Broke affinity for irq 124 [806833.437259] Broke affinity for irq 125 [806833.437267] Broke affinity for irq 126 [806833.437275] Broke affinity for irq 127 [806833.437284] Broke affinity for irq 128 [806833.437298] Broke affinity for irq 131 [806833.439836] smpboot: CPU 2 is now offline [806833.464804] Broke affinity for irq 1 [806833.464813] Broke affinity for irq 8 [806833.464820] Broke affinity for irq 9 [806833.464829] Broke affinity for irq 16 [806833.464842] Broke affinity for irq 82 [806833.464853] Broke affinity for irq 122 [806833.464860] Broke affinity for irq 123 [806833.464867] Broke affinity for irq 124 [806833.464875] Broke affinity for irq 125 [806833.464882] Broke affinity for irq 126 [806833.464890] Broke affinity for irq 127 [806833.464898] Broke affinity for irq 128 [806833.464906] Broke affinity for irq 130 [806833.464913] Broke affinity for irq 131 [806833.466056] smpboot: CPU 3 is now offline [806833.487489] ACPI: Low-level resume complete [806833.487603] ACPI : EC: EC started [806833.487603] PM: Restoring platform NVS memory [806833.489894] Enabling non-boot CPUs ... [806833.511461] x86: Booting SMP configuration: [806833.511462] smpboot: Booting Node 0 Processor 1 APIC 0x2 [806833.515356] cache: parent cpu1 should not be sleeping [806833.515553] CPU1 is up [806833.543622] smpboot: Booting Node 0 Processor 2 APIC 0x1 [806833.546764] cache: parent cpu2 should not be sleeping [806833.547197] CPU2 is up [806833.567695] smpboot: Booting Node 0 Processor 3 APIC 0x3 [806833.570777] cache: parent cpu3 should not be sleeping [806833.571257] CPU3 is up [806833.578477] ACPI: Waking up from system sleep state S3 [806833.603683] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [806833.663988] PM: noirq resume of devices complete after 60.483 msecs [806833.681426] PM: early resume of devices complete after 17.355 msecs [806833.681827] r8169 0000:02:00.0: System wakeup disabled by ACPI [806833.682300] rtc_cmos 00:03: System wakeup disabled by ACPI [806833.687606] [drm] GuC firmware load skipped [806833.687615] sd 0:0:0:0: [sda] Starting disk [806833.705716] r8169 0000:02:00.0 enp2s0: link down [806833.746284] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [806833.764808] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [806833.782928] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [806833.999330] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [806833.999359] ata2: SATA link down (SStatus 4 SControl 300) [806834.003120] ata1.00: configured for UDMA/133 [806834.019998] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [806834.427953] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [806834.835936] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [806835.095937] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [806835.259047] PM: resume of devices complete after 1577.624 msecs [806835.259198] usb 1-5:1.0: rebind failed: -517 [806835.259199] usb 1-5:1.1: rebind failed: -517 [806835.259421] PM: Finishing wakeup. [806835.259421] Restarting tasks ... done. [806835.331503] [drm] RC6 on [806835.380379] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [806835.398338] r8169 0000:02:00.0 enp2s0: link down [806835.399553] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [806835.400897] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [806837.337131] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [806837.449627] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [806846.787711] wlp3s0: authenticate with e0:3f:49:24:2c:94 [806846.815590] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [806846.816156] wlp3s0: authenticated [806846.819543] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [806846.821557] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [806846.828892] wlp3s0: associated [806846.828935] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [806846.832049] ath: EEPROM regdomain: 0x8114 [806846.832050] ath: EEPROM indicates we should expect a country code [806846.832051] ath: doing EEPROM country->regdmn map search [806846.832052] ath: country maps to regdmn code: 0x37 [806846.832052] ath: Country alpha2 being used: DE [806846.832053] ath: Regpair used: 0x37 [806846.832054] ath: regdomain 0x8114 dynamically updated by country IE [806846.832556] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [809329.970051] vgaarb: this pci device is not a vga device [810472.769373] vgaarb: this pci device is not a vga device [810485.200804] vgaarb: this pci device is not a vga device [810485.202462] nvidia-modeset: Allocated GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [810485.202576] nvidia-modeset: Freed GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [810485.204571] vgaarb: this pci device is not a vga device [810489.764619] audit: type=1400 audit(1485702908.377:39): apparmor="DENIED" operation="mknod" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/12826/fd/2" pid=12826 comm="lightdm-session" requested_mask="c" denied_mask="c" fsuid=994 ouid=994 [810489.767171] audit: type=1400 audit(1485702908.381:40): apparmor="DENIED" operation="mknod" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/12828/fd/2" pid=12828 comm="lightdm-session" requested_mask="c" denied_mask="c" fsuid=994 ouid=994 [810489.894190] audit: type=1400 audit(1485702908.509:41): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/driver/nvidia/params" pid=12896 comm="glxinfo" requested_mask="r" denied_mask="r" fsuid=994 ouid=0 [810489.894458] audit: type=1400 audit(1485702908.509:42): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/driver/nvidia/params" pid=12896 comm="glxinfo" requested_mask="r" denied_mask="r" fsuid=994 ouid=0 [810489.894643] audit: type=1400 audit(1485702908.509:43): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/driver/nvidia/params" pid=12896 comm="glxinfo" requested_mask="r" denied_mask="r" fsuid=994 ouid=0 [810489.898820] audit: type=1400 audit(1485702908.513:44): apparmor="DENIED" operation="sendmsg" profile="/usr/lib/lightdm/lightdm-guest-session" pid=12896 comm="glxinfo" family="unix" sock_type="dgram" protocol=0 requested_mask="send" denied_mask="send" addr=none peer_addr="@6E7669646961653234336263326300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined" [810489.915276] audit: type=1400 audit(1485702908.529:45): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/driver/nvidia/params" pid=12896 comm="glxinfo" requested_mask="r" denied_mask="r" fsuid=994 ouid=0 [810490.300698] audit: type=1400 audit(1485702908.913:46): apparmor="DENIED" operation="connect" profile="/usr/lib/lightdm/lightdm-guest-session" name="/run/snapd.socket" pid=13042 comm="content-hub-pee" requested_mask="w" denied_mask="w" fsuid=994 ouid=0 [810490.301539] audit: type=1400 audit(1485702908.917:47): apparmor="DENIED" operation="connect" profile="/usr/lib/lightdm/lightdm-guest-session" name="/run/snapd.socket" pid=13042 comm="content-hub-pee" requested_mask="w" denied_mask="w" fsuid=994 ouid=0 [810494.210242] audit: type=1400 audit(1485702912.825:48): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=13457 comm="indicator-messa" requested_mask="r" denied_mask="r" fsuid=994 ouid=0 [812890.626299] vgaarb: this pci device is not a vga device [814205.156421] vgaarb: this pci device is not a vga device [816338.429400] vgaarb: this pci device is not a vga device [816952.803964] vgaarb: this pci device is not a vga device [818767.865786] vgaarb: this pci device is not a vga device [818980.916340] vgaarb: this pci device is not a vga device [820803.604946] vgaarb: this pci device is not a vga device [821281.059968] vgaarb: this pci device is not a vga device [822077.994215] vgaarb: this pci device is not a vga device [822213.028410] vgaarb: this pci device is not a vga device [827890.131783] vgaarb: this pci device is not a vga device [830041.452684] vgaarb: this pci device is not a vga device [830055.474487] vgaarb: this pci device is not a vga device [830055.476451] nvidia-modeset: Allocated GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [830055.476576] nvidia-modeset: Freed GPU:0 (GPU-e40b9aff-4ff8-f5c7-f417-5d4835e9d8b1) @ PCI:0000:01:00.0 [830055.750147] vgaarb: this pci device is not a vga device [830077.873591] vgaarb: this pci device is not a vga device [831261.429744] vgaarb: this pci device is not a vga device [836577.676111] vgaarb: this pci device is not a vga device [837744.954070] vgaarb: this pci device is not a vga device [900964.124727] vgaarb: this pci device is not a vga device [901140.012083] usb 1-1: new high-speed USB device number 6 using xhci_hcd [901140.152946] usb 1-1: New USB device found, idVendor=0846, idProduct=9052 [901140.152953] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [901140.152958] usb 1-1: Product: 802.11ac WLAN Adapter [901140.152962] usb 1-1: Manufacturer: Realtek [901140.152966] usb 1-1: SerialNumber: 00e04c000001 [901154.267888] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [901157.432395] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [901157.432405] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [901162.019292] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [901162.077007] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [901171.414229] wlp3s0: authenticate with e0:3f:49:24:2c:94 [901171.443246] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [901171.443783] wlp3s0: authenticated [901171.444253] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [901171.446129] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [901171.447882] wlp3s0: associated [901171.448055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [901171.451502] ath: EEPROM regdomain: 0x8114 [901171.451504] ath: EEPROM indicates we should expect a country code [901171.451504] ath: doing EEPROM country->regdmn map search [901171.451505] ath: country maps to regdmn code: 0x37 [901171.451506] ath: Country alpha2 being used: DE [901171.451507] ath: Regpair used: 0x37 [901171.451508] ath: regdomain 0x8114 dynamically updated by country IE [901171.467997] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [901236.015121] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [901236.081901] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [901236.570603] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [901236.575295] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [901236.725830] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [901246.073422] wlp3s0: authenticate with e0:3f:49:24:2c:94 [901246.104412] wlp3s0: send auth to e0:3f:49:24:2c:94 (try 1/3) [901246.105007] wlp3s0: authenticated [901246.108647] wlp3s0: associate with e0:3f:49:24:2c:94 (try 1/3) [901246.110568] wlp3s0: RX AssocResp from e0:3f:49:24:2c:94 (capab=0x1011 status=0 aid=1) [901246.112803] wlp3s0: associated [901246.112854] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [901246.116322] ath: EEPROM regdomain: 0x8114 [901246.116323] ath: EEPROM indicates we should expect a country code [901246.116324] ath: doing EEPROM country->regdmn map search [901246.116325] ath: country maps to regdmn code: 0x37 [901246.116327] ath: Country alpha2 being used: DE [901246.116327] ath: Regpair used: 0x37 [901246.116329] ath: regdomain 0x8114 dynamically updated by country IE [901246.117199] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e0:3f:49:24:2c:94 [901272.282885] usb 1-1: USB disconnect, device number 6 [901279.912922] usb 1-4: new high-speed USB device number 7 using xhci_hcd [901280.053385] usb 1-4: New USB device found, idVendor=0846, idProduct=9052 [901280.053395] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [901280.053401] usb 1-4: Product: 802.11ac WLAN Adapter [901280.053406] usb 1-4: Manufacturer: Realtek [901280.053410] usb 1-4: SerialNumber: 00e04c000001 [901299.129743] usb 1-4: USB disconnect, device number 7 [901701.597796] usb 1-4: new high-speed USB device number 8 using xhci_hcd [901701.738529] usb 1-4: New USB device found, idVendor=0846, idProduct=9052 [901701.738536] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [901701.738541] usb 1-4: Product: 802.11ac WLAN Adapter [901701.738545] usb 1-4: Manufacturer: Realtek [901701.738548] usb 1-4: SerialNumber: 00e04c000001 [904788.985445] vgaarb: this pci device is not a vga device [905314.796795] vgaarb: this pci device is not a vga device [906437.418603] wlp3s0: deauthenticating from e0:3f:49:24:2c:94 by local choice (Reason: 3=DEAUTH_LEAVING) [906440.458774] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:94: -110 [906440.458783] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:94) from hardware (-110) [906440.959763] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [906440.978154] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [906441.133807] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [906446.111250] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! [906450.459999] wlp3s0: authenticate with e0:3f:49:24:2c:90 [906450.499900] wlp3s0: send auth to e0:3f:49:24:2c:90 (try 1/3) [906450.502052] wlp3s0: authenticated [906450.506958] wlp3s0: associate with e0:3f:49:24:2c:90 (try 1/3) [906450.510647] wlp3s0: RX AssocResp from e0:3f:49:24:2c:90 (capab=0x1411 status=0 aid=7) [906450.513549] wlp3s0: associated [906450.513713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [906621.317879] usb 1-4: USB disconnect, device number 8 [906626.354612] usb 1-4: new high-speed USB device number 9 using xhci_hcd [906626.495383] usb 1-4: New USB device found, idVendor=0846, idProduct=9052 [906626.495390] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [906626.495396] usb 1-4: Product: 802.11ac WLAN Adapter [906626.495400] usb 1-4: Manufacturer: Realtek [906626.495403] usb 1-4: SerialNumber: 00e04c000001 [906627.534314] RTL871X: module init start [906627.534316] RTL871X: rtl8812au v4.3.14_13455.20150212_BTCOEX20150128-51 [906627.534317] RTL871X: rtl8812au BT-Coex version = BTCOEX20150128-51 [906627.591426] RTL871X: rtw_ndev_init(wlan0) [906627.591769] usbcore: registered new interface driver rtl8812au [906627.591771] RTL871X: module init ret=0 [906627.604009] rtl8812au 1-4:1.0 wlxc0ffd4bebf90: renamed from wlan0 [906627.639864] IPv6: ADDRCONF(NETDEV_UP): wlxc0ffd4bebf90: link is not ready [906627.910569] IPv6: ADDRCONF(NETDEV_UP): wlxc0ffd4bebf90: link is not ready [906627.973771] IPv6: ADDRCONF(NETDEV_UP): wlxc0ffd4bebf90: link is not ready [906678.357718] RTL871X: rtw_set_802_11_connect(wlxc0ffd4bebf90) fw_state=0x00000008 [906678.633617] RTL871X: start auth [906678.635434] RTL871X: auth success, start assoc [906678.638459] RTL871X: rtw_cfg80211_indicate_connect(wlxc0ffd4bebf90) BSS not found !! [906678.638496] RTL871X: assoc success [906678.638819] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc0ffd4bebf90: link becomes ready [906678.643066] RTL871X: send eapol packet [906678.652939] RTL871X: send eapol packet [906678.655624] RTL871X: set pairwise key camid:4, addr:e0:3f:49:24:2c:94, kid:0, type:AES [906678.658176] ath: EEPROM regdomain: 0x8114 [906678.658179] ath: EEPROM indicates we should expect a country code [906678.658182] ath: doing EEPROM country->regdmn map search [906678.658184] ath: country maps to regdmn code: 0x37 [906678.658187] ath: Country alpha2 being used: DE [906678.658189] ath: Regpair used: 0x37 [906678.658193] ath: regdomain 0x8114 dynamically updated by country IE [906678.660504] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [907422.538502] vgaarb: this pci device is not a vga device [907508.188108] vgaarb: this pci device is not a vga device [909289.011179] RTL871X: send eapol packet [909289.011772] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [910415.503248] vgaarb: this pci device is not a vga device [910642.004795] vgaarb: this pci device is not a vga device [912295.688702] vgaarb: this pci device is not a vga device [912884.055954] RTL871X: send eapol packet [912884.057287] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [914313.017308] vgaarb: this pci device is not a vga device [915442.084711] vgaarb: this pci device is not a vga device [915805.404584] vgaarb: this pci device is not a vga device [916314.363154] vgaarb: this pci device is not a vga device [916479.116267] RTL871X: send eapol packet [916479.117020] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [916506.388285] vgaarb: this pci device is not a vga device [916954.079731] vgaarb: this pci device is not a vga device [918166.516816] vgaarb: this pci device is not a vga device [919136.056657] vgaarb: this pci device is not a vga device [920075.399575] RTL871X: send eapol packet [920075.401280] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [920617.496202] vgaarb: this pci device is not a vga device [922594.340298] vgaarb: this pci device is not a vga device [923671.989119] RTL871X: send eapol packet [923671.991338] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [927261.922178] RTL871X: send eapol packet [927261.923629] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [930858.818615] RTL871X: send eapol packet [930858.820330] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [934455.202960] RTL871X: send eapol packet [934455.203554] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [938047.593511] RTL871X: send eapol packet [938047.594974] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [941643.976989] RTL871X: send eapol packet [941643.977674] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [945240.362430] RTL871X: send eapol packet [945240.363928] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [948835.825037] RTL871X: send eapol packet [948835.826219] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [952429.136373] RTL871X: send eapol packet [952429.137298] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:2, type:AES [956022.961477] RTL871X: send eapol packet [956022.962678] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:1, type:AES [958448.347791] wlp3s0: deauthenticating from e0:3f:49:24:2c:90 by local choice (Reason: 3=DEAUTH_LEAVING) [958451.388846] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer e0:3f:49:24:2c:90: -110 [958451.388850] wlp3s0: failed to remove key (0, e0:3f:49:24:2c:90) from hardware (-110) [958461.976959] PM: Syncing filesystems ... done. [958461.989841] PM: Preparing system for sleep (mem) [958461.992135] vgaarb: this pci device is not a vga device [958464.285863] Freezing user space processes ... (elapsed 0.002 seconds) done. [958464.288398] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [958464.288680] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [958464.290229] PM: Suspending system (mem) [958464.290279] Suspending console(s) (use no_console_suspend to debug) [958464.290428] RTL871X: suspend start [958464.290462] RTL871X: rtw_cmd_thread(wlxc0ffd4bebf90) stop_req:1, break [958464.290910] RTL871X: rtw_dev_unload: driver not in IPS [958464.291773] sd 0:0:0:0: [sda] Synchronizing SCSI cache [958464.293804] RTL871X: rtw suspend success in 4 ms [958464.294469] sd 0:0:0:0: [sda] Stopping disk [958464.308503] tpm tpm0: A TPM error (325) occurred stopping the TPM [958465.578639] PM: suspend of devices complete after 1288.253 msecs [958465.596491] PM: late suspend of devices complete after 17.847 msecs [958465.597832] r8169 0000:02:00.0: System wakeup enabled by ACPI [958465.598495] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [958465.636490] PM: noirq suspend of devices complete after 39.992 msecs [958465.637530] ACPI: Preparing to enter system sleep state S3 [958465.638653] ACPI : EC: EC stopped [958465.638655] PM: Saving platform NVS memory [958465.639130] Disabling non-boot CPUs ... [958465.640012] Broke affinity for irq 127 [958465.640024] Broke affinity for irq 130 [958465.642254] smpboot: CPU 1 is now offline [958465.658755] Broke affinity for irq 122 [958465.658764] Broke affinity for irq 123 [958465.658771] Broke affinity for irq 124 [958465.658779] Broke affinity for irq 125 [958465.658787] Broke affinity for irq 126 [958465.658795] Broke affinity for irq 127 [958465.658804] Broke affinity for irq 128 [958465.658813] Broke affinity for irq 130 [958465.660046] smpboot: CPU 2 is now offline [958465.686287] Broke affinity for irq 1 [958465.686296] Broke affinity for irq 8 [958465.686304] Broke affinity for irq 9 [958465.686313] Broke affinity for irq 16 [958465.686326] Broke affinity for irq 82 [958465.686337] Broke affinity for irq 122 [958465.686344] Broke affinity for irq 123 [958465.686352] Broke affinity for irq 124 [958465.686359] Broke affinity for irq 125 [958465.686366] Broke affinity for irq 126 [958465.686374] Broke affinity for irq 127 [958465.686383] Broke affinity for irq 128 [958465.686391] Broke affinity for irq 130 [958465.686398] Broke affinity for irq 131 [958465.687561] smpboot: CPU 3 is now offline [958465.701086] ACPI: Low-level resume complete [958465.701201] ACPI : EC: EC started [958465.701201] PM: Restoring platform NVS memory [958465.703493] Enabling non-boot CPUs ... [958465.724884] x86: Booting SMP configuration: [958465.724885] smpboot: Booting Node 0 Processor 1 APIC 0x2 [958465.728782] cache: parent cpu1 should not be sleeping [958465.728983] CPU1 is up [958465.769042] smpboot: Booting Node 0 Processor 2 APIC 0x1 [958465.772190] cache: parent cpu2 should not be sleeping [958465.772635] CPU2 is up [958465.797115] smpboot: Booting Node 0 Processor 3 APIC 0x3 [958465.800203] cache: parent cpu3 should not be sleeping [958465.800701] CPU3 is up [958465.807883] ACPI: Waking up from system sleep state S3 [958465.833108] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [958465.898421] PM: noirq resume of devices complete after 65.496 msecs [958465.913619] PM: early resume of devices complete after 15.117 msecs [958465.913951] r8169 0000:02:00.0: System wakeup disabled by ACPI [958465.914461] rtc_cmos 00:03: System wakeup disabled by ACPI [958465.916019] sd 0:0:0:0: [sda] Starting disk [958465.918958] [drm] GuC firmware load skipped [958465.935882] r8169 0000:02:00.0 enp2s0: link down [958465.979808] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [958465.998378] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [958466.017073] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout [958466.132996] RTL871X: resume start [958466.231079] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [958466.231295] ata2: SATA link down (SStatus 4 SControl 300) [958466.234434] ata1.00: configured for UDMA/133 [958466.398109] RTL871X: rtw_resume_common:0 in 264 ms [958466.400997] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [958466.809378] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [958467.069409] usb 1-7: reset high-speed USB device number 4 using xhci_hcd [958467.329364] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [958467.425209] [drm] RC6 on [958467.490748] PM: resume of devices complete after 1577.155 msecs [958467.490893] usb 1-5:1.0: rebind failed: -517 [958467.490895] usb 1-5:1.1: rebind failed: -517 [958467.491148] PM: Finishing wakeup. [958467.491149] Restarting tasks ... done. [958468.576742] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [958470.524022] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [958470.527368] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [958470.547401] r8169 0000:02:00.0 enp2s0: link down [958470.547771] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [958470.550760] IPv6: ADDRCONF(NETDEV_UP): wlxc0ffd4bebf90: link is not ready [958470.719430] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [958478.236941] wlp3s0: authenticate with e0:3f:49:24:2c:90 [958478.276420] wlp3s0: send auth to e0:3f:49:24:2c:90 (try 1/3) [958478.278067] wlp3s0: authenticated [958478.280499] wlp3s0: associate with e0:3f:49:24:2c:90 (try 1/3) [958478.283962] wlp3s0: RX AssocResp from e0:3f:49:24:2c:90 (capab=0x1411 status=0 aid=6) [958478.285804] wlp3s0: associated [958478.285861] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [958479.068995] RTL871X: rtw_set_802_11_connect(wlxc0ffd4bebf90) fw_state=0x00000008 [958479.377045] RTL871X: start auth [958479.378698] RTL871X: auth success, start assoc [958479.381611] RTL871X: rtw_cfg80211_indicate_connect(wlxc0ffd4bebf90) BSS not found !! [958479.381616] RTL871X: assoc success [958479.387389] RTL871X: send eapol packet [958479.397519] RTL871X: send eapol packet [958479.397585] RTL871X: set pairwise key camid:4, addr:e0:3f:49:24:2c:94, kid:0, type:AES [958479.399073] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:2, type:AES [958591.506214] RTL871X: send eapol packet [958591.507122] RTL871X: set group key camid:6, addr:e0:3f:49:24:2c:94, kid:1, type:AES [959028.388643] vgaarb: this pci device is not a vga device [962187.792734] RTL871X: send eapol packet [962187.794563] RTL871X: set group key camid:5, addr:e0:3f:49:24:2c:94, kid:2, type:AES [964439.603180] vgaarb: this pci device is not a vga device [964463.451124] audit_printk_skb: 15 callbacks suppressed [964463.451126] audit: type=1400 audit(1485897463.453:54): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=1953 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0