2017-01-18 09:10:49 |
squirL |
description |
I have number of SUN x86-based servers with Intel Ethenet controllers. Both igb and e1000 drivers are used. All servers have strange issue: after fresh Ubuntu 16.04 installation all ethernet links are in down state even if cables are plugged in.
At the network switch side links are in up state!
If i try to manually up the link via ip link tool, all works fine. When i try to manually assign an IP address to "dead" interface it brings up... After reboot all links are down again.
Any suggestion?
Environment:
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"
NAME="Ubuntu"
VERSION="16.04.1 LTS (Xenial Xerus)"
Description of affected adapters:
10:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: QLogic Corp. 82571EB Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 49
Region 0: Memory at faee0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at faec0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 7c00 [size=32]
Expansion ROM at faea0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
1f:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
Subsystem: Oracle/SUN 82576 Gigabit Network Connection
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faf60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at faf40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d880 [size=32]
Region 3: Memory at faf98000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at faf20000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
Modules:
modinfo igb
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/intel/igb/igb.ko
version: 5.3.0-k
modinfo e1000e
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
version: 3.2.6-k
|
I have number of SUN x86-based servers with Intel Ethenet controllers. Both igb and e1000 drivers are used. All servers have strange issue: after fresh Ubuntu 16.04 installation all ethernet links are in down state even if cables are plugged in.
At the network switch side links are in up state!
If i try to manually up the link via ip link tool, all works fine. When i try to manually assign an IP address to "dead" interface it brings up... After reboot all links are down again.
Any suggestion?
Environment:
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"
NAME="Ubuntu"
VERSION="16.04.1 LTS (Xenial Xerus)"
Description of affected adapters:
10:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: QLogic Corp. 82571EB Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 49
Region 0: Memory at faee0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at faec0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 7c00 [size=32]
Expansion ROM at faea0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
1f:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
Subsystem: Oracle/SUN 82576 Gigabit Network Connection
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faf60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at faf40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d880 [size=32]
Region 3: Memory at faf98000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at faf20000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
Modules:
modinfo igb
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/intel/igb/igb.ko
version: 5.3.0-k
modinfo e1000e
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
version: 3.2.6-k
---
AlsaDevices:
total 0
crw-rw----+ 1 root audio 116, 1 Jan 17 10:38 seq
crw-rw----+ 1 root audio 116, 33 Jan 17 10:38 timer
AplayDevices: Error: [Errno 2] No such file or directory
ApportVersion: 2.20.1-0ubuntu2.4
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
DistroRelease: Ubuntu 16.04
HibernationDevice: RESUME=UUID=a4e3c371-9e25-45f8-ae21-6e876f19c276
InstallationDate: Installed on 2016-12-29 (19 days ago)
InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
IwConfig: Error: [Errno 2] No such file or directory
MachineType: Oracle Corporation SUN BLADE X6270 M2 SERVER MODULE
NonfreeKernelModules: zfs zunicode zcommon znvpair zavl
Package: linux (not installed)
PciMultimedia:
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 astdrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-59-generic root=UUID=396b00e0-4d6d-4143-a0a0-d954eafc3c12 ro
ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35
RelatedPackageVersions:
linux-restricted-modules-4.4.0-59-generic N/A
linux-backports-modules-4.4.0-59-generic N/A
linux-firmware 1.157.6
RfKill: Error: [Errno 2] No such file or directory
Tags: xenial
Uname: Linux 4.4.0-59-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
_MarkForUpload: True
dmi.bios.date: 02/17/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 08070400
dmi.board.asset.tag: 511-1418-03
dmi.board.name: ASSY,BLADE,X6270,M2
dmi.board.vendor: Oracle Corporation
dmi.board.version: 511-1418-03
dmi.chassis.type: 28
dmi.chassis.vendor: ORACLE CORPORATION
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr08070400:bd02/17/2014:svnOracleCorporation:pnSUNBLADEX6270M2SERVERMODULE:pvr:rvnOracleCorporation:rnASSY,BLADE,X6270,M2:rvr511-1418-03:cvnORACLECORPORATION:ct28:cvr:
dmi.product.name: SUN BLADE X6270 M2 SERVER MODULE
dmi.sys.vendor: Oracle Corporation |
|