[ 0.000000] Linux version 2.6.24-2-generic (buildd@crested) (gcc version 4.2.3 20071210 (prerelease) (Ubuntu 4.2.2-4ubuntu1)) #1 SMP Thu Dec 20 17:58:55 GMT 2007 (Ubuntu 2.6.24-2.4-generic) [ 0.000000] Command line: root=UUID=f5f2132b-1fa9-4870-b357-a2671653bb30 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6cb000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76D0 checksum 0 [ 0.000000] ACPI: RSDP 000F76D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BF6BEDBC, 0094 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: FACP BF6C7BD2, 00F4 (r3 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: DSDT BF6C041A, 7744 (r2 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: FACS BF6CAFC0, 0040 [ 0.000000] ACPI: APIC BF6C7CC6, 0068 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: HPET BF6C7D2E, 0038 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: MCFG BF6C7D66, 003C (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: TCPA BF6C7DA2, 0032 (r1 Sony VAIO 20070905 PTL 5A52) [ 0.000000] ACPI: TMOR BF6C7DD4, 0026 (r1 Sony VAIO 20070905 PTL 3) [ 0.000000] ACPI: SLIC BF6C7DFA, 0176 (r1 Sony VAIO 20070905 PTL 1000000) [ 0.000000] ACPI: APIC BF6C7F70, 0068 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: BOOT BF6C7FD8, 0028 (r1 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: SSDT BF6C013D, 02DD (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6C001B, 0122 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF3DC, 025F (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF336, 00A6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BEE50, 04E6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1189 pages reserved [ 0.000000] DMA zone: 2754 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cb000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cb000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34528 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026986 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=f5f2132b-1fa9-4870-b357-a2671653bb30 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 16.745950] Marking TSC unstable due to TSCs unsynchronized [ 16.745952] time.c: Detected 2194.498 MHz processor. [ 16.747282] Console: colour VGA+ 80x25 [ 16.747284] console [tty0] enabled [ 16.747303] Checking aperture... [ 16.747313] Calgary: detecting Calgary via BIOS EBDA area [ 16.747315] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 16.747316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 16.785816] Placing software IO TLB between 0x103b000 - 0x503b000 [ 16.823072] Memory: 4033756k/5242880k available (2412k kernel code, 150624k reserved, 1287k data, 312k init) [ 16.823102] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.899729] Calibrating delay using timer specific routine.. 4393.69 BogoMIPS (lpj=8787383) [ 16.899758] Security Framework initialized [ 16.899764] SELinux: Disabled at boot. [ 16.899767] Capability LSM initialized [ 16.900073] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 16.902406] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.903564] Mount-cache hash table entries: 256 [ 16.903694] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.903696] CPU: L2 cache: 4096K [ 16.903698] CPU 0/0 -> Node 0 [ 16.903700] using mwait in idle threads. [ 16.903701] CPU: Physical Processor ID: 0 [ 16.903702] CPU: Processor Core ID: 0 [ 16.903707] CPU0: Thermal monitoring enabled (TM2) [ 16.903718] SMP alternatives: switching to UP code [ 16.904400] Early unpacking initramfs... done [ 17.202290] ACPI: Core revision 20070126 [ 17.202331] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.253195] Using local APIC timer interrupts. [ 17.298706] APIC timer calibration result 12468741 [ 17.298707] Detected 12.468 MHz APIC timer. [ 17.298773] SMP alternatives: switching to SMP code [ 17.299328] Booting processor 1/2 APIC 0x1 [ 17.309778] Initializing CPU#1 [ 17.386598] Calibrating delay using timer specific routine.. 4388.97 BogoMIPS (lpj=8777946) [ 17.386603] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.386605] CPU: L2 cache: 4096K [ 17.386607] CPU 1/1 -> Node 0 [ 17.386608] CPU: Physical Processor ID: 0 [ 17.386609] CPU: Processor Core ID: 1 [ 17.386614] CPU1: Thermal monitoring enabled (TM2) [ 17.387070] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 17.387170] Brought up 2 CPUs [ 17.387247] CPU0 attaching sched-domain: [ 17.387249] domain 0: span 03 [ 17.387251] groups: 01 02 [ 17.387253] domain 1: span 03 [ 17.387254] groups: 03 [ 17.387256] CPU1 attaching sched-domain: [ 17.387257] domain 0: span 03 [ 17.387258] groups: 02 01 [ 17.387260] domain 1: span 03 [ 17.387261] groups: 03 [ 17.387452] net_namespace: 120 bytes [ 17.387792] Time: 20:39:51 Date: 01/01/08 [ 17.387813] NET: Registered protocol family 16 [ 17.387967] ACPI: bus type pci registered [ 17.388028] PCI: Using configuration type 1 [ 17.389175] ACPI: EC: Look up EC in DSDT [ 17.390853] ACPI: System BIOS is requesting _OSI(Linux) [ 17.390854] ACPI: If "acpi_osi=Linux" works better, [ 17.390855] Please send dmidecode to linux-acpi@vger.kernel.org [ 17.392932] ACPI: Interpreter enabled [ 17.392933] ACPI: (supports S0 S3 S4 S5) [ 17.392945] ACPI: Using IOAPIC for interrupt routing [ 17.407632] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 17.407634] ACPI: EC: driver started in poll mode [ 17.407717] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.410523] PCI: Transparent bridge - 0000:00:1e.0 [ 17.410679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.411024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 17.411149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 17.411262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 17.411379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 17.411510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 17.418487] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.418598] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.418688] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.418776] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.418863] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.418949] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.419035] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.419121] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.419244] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.419266] pnp: PnP ACPI init [ 17.419272] ACPI: bus type pnp registered [ 17.424051] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424105] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424156] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424207] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424259] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.428097] pnp: PnP ACPI: found 12 devices [ 17.428099] ACPI: ACPI bus type pnp unregistered [ 17.428277] PCI: Using ACPI for IRQ routing [ 17.428279] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.446531] NET: Registered protocol family 8 [ 17.446532] NET: Registered protocol family 20 [ 17.446558] PCI-GART: No AMD northbridge found. [ 17.446564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 17.446566] hpet0: 3 64-bit timers, 14318180 Hz [ 17.450513] Time: hpet clocksource has been installed. [ 17.450523] Switched to high resolution mode on CPU 0 [ 17.451000] Switched to high resolution mode on CPU 1 [ 17.458497] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 17.458499] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 17.458501] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 17.458503] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 17.458506] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 17.458508] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 17.458510] system 00:01: iomem range 0x0-0x0 could not be reserved [ 17.458512] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 17.458518] system 00:07: ioport range 0x680-0x69f has been reserved [ 17.458520] system 00:07: ioport range 0x800-0x80f has been reserved [ 17.458522] system 00:07: ioport range 0x1000-0x107f has been reserved [ 17.458524] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 17.458526] system 00:07: ioport range 0x1640-0x164f has been reserved [ 17.458528] system 00:07: ioport range 0xfe00-0xfe00 has been reserved [ 17.458875] PCI: Bridge: 0000:00:1c.0 [ 17.458878] IO window: 2000-2fff [ 17.458884] MEM window: f6000000-f7ffffff [ 17.458888] PREFETCH window: f0000000-f1ffffff [ 17.458894] PCI: Bridge: 0000:00:1c.1 [ 17.458897] IO window: 3000-3fff [ 17.458903] MEM window: f8000000-f9ffffff [ 17.458907] PREFETCH window: f2000000-f3ffffff [ 17.458913] PCI: Bridge: 0000:00:1c.2 [ 17.458916] IO window: 4000-4fff [ 17.458921] MEM window: fa000000-fbffffff [ 17.458925] PREFETCH window: f4000000-f5ffffff [ 17.458931] PCI: Bridge: 0000:00:1c.3 [ 17.458934] IO window: 5000-5fff [ 17.458939] MEM window: c8000000-c9ffffff [ 17.458944] PREFETCH window: cc000000-cdffffff [ 17.458953] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 17.458954] IO window: 00001400-000014ff [ 17.458959] IO window: 00006000-000060ff [ 17.458964] PREFETCH window: c4000000-c7ffffff [ 17.458969] MEM window: 140000000-143ffffff [ 17.458974] PCI: Bridge: 0000:00:1e.0 [ 17.458974] IO window: disabled. [ 17.458980] MEM window: fc200000-fc2fffff [ 17.458984] PREFETCH window: disabled. [ 17.459015] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.459020] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.459045] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.459051] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 17.459075] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.459081] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.459105] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 17.459110] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.459124] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.459143] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.459154] NET: Registered protocol family 2 [ 17.494538] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.495530] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 17.499424] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 17.500005] TCP: Hash tables configured (established 524288 bind 65536) [ 17.500008] TCP reno registered [ 17.510541] checking if image is initramfs... it is [ 18.146307] Freeing initrd memory: 7961k freed [ 18.149878] Simple Boot Flag at 0x36 set to 0x1 [ 18.150594] audit: initializing netlink socket (disabled) [ 18.150611] audit(1199219992.364:1): initialized [ 18.152349] VFS: Disk quotas dquot_6.5.1 [ 18.152403] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.152513] AppArmor: Unable to register AppArmor [ 18.152582] io scheduler noop registered [ 18.152583] io scheduler anticipatory registered [ 18.152585] io scheduler deadline registered [ 18.152669] io scheduler cfq registered (default) [ 18.152687] Boot video device is 0000:00:02.0 [ 18.156401] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.156463] assign_interrupt_mode Found MSI capability [ 18.156514] Allocate Port Service[0000:00:1c.0:pcie00] [ 18.156542] Allocate Port Service[0000:00:1c.0:pcie02] [ 18.156644] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.156705] assign_interrupt_mode Found MSI capability [ 18.156753] Allocate Port Service[0000:00:1c.1:pcie00] [ 18.156781] Allocate Port Service[0000:00:1c.1:pcie02] [ 18.156877] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 18.156938] assign_interrupt_mode Found MSI capability [ 18.156986] Allocate Port Service[0000:00:1c.2:pcie00] [ 18.157010] Allocate Port Service[0000:00:1c.2:pcie02] [ 18.157107] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.157168] assign_interrupt_mode Found MSI capability [ 18.157216] Allocate Port Service[0000:00:1c.3:pcie00] [ 18.157242] Allocate Port Service[0000:00:1c.3:pcie02] [ 18.176084] Real Time Clock Driver v1.12ac [ 18.176280] hpet_resources: 0xfed00000 is busy [ 18.176304] Linux agpgart interface v0.102 [ 18.176306] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.177194] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.177244] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.177319] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.179557] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.179561] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.189636] mice: PS/2 mouse device common for all mice [ 18.189667] cpuidle: using governor ladder [ 18.189668] cpuidle: using governor menu [ 18.189728] TCP cubic registered [ 18.189784] NET: Registered protocol family 1 [ 18.189921] Magic number: 8:297:699 [ 18.190002] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 18.190007] Freeing unused kernel memory: 312k freed [ 18.225421] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.344668] fuse init (API version 7.9) [ 19.351666] ACPI: SSDT BF6BFCD9, 027A (r1 Sony VAIO 20070905 PTL 20050624) [ 19.351856] ACPI: SSDT BF6BF63B, 0619 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.355283] Monitor-Mwait will be used to enter C-1 state [ 19.355286] Monitor-Mwait will be used to enter C-2 state [ 19.355359] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 19.355362] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.355562] ACPI: SSDT BF6BFF53, 00C8 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.355736] ACPI: SSDT BF6BFC54, 0085 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.358238] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 19.358241] ACPI: Processor [CPU1] (supports 8 throttling states) [ 19.365942] ACPI: Thermal Zone [ATF0] (62 C) [ 19.366614] ACPI: Thermal Zone [DTS0] (62 C) [ 19.367297] ACPI: Thermal Zone [DTS1] (63 C) [ 19.452095] usbcore: registered new interface driver usbfs [ 19.452112] usbcore: registered new interface driver hub [ 19.457083] usbcore: registered new device driver usb [ 19.463387] USB Universal Host Controller Interface driver v3.0 [ 19.463434] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 19.463444] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 19.463448] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 19.463674] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 19.463706] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 19.463814] usb usb1: configuration #1 chosen from 1 choice [ 19.463832] hub 1-0:1.0: USB hub found [ 19.463837] hub 1-0:1.0: 2 ports detected [ 19.572668] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 19.572680] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 19.572684] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 19.572702] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 19.572730] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 19.572816] usb usb2: configuration #1 chosen from 1 choice [ 19.572832] hub 2-0:1.0: USB hub found [ 19.572837] hub 2-0:1.0: 2 ports detected [ 19.623885] SCSI subsystem initialized [ 19.641547] libata version 3.00 loaded. [ 19.676531] ahci 0000:00:1f.2: version 3.0 [ 19.676566] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 20.678074] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 20.678078] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 20.678083] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 20.678690] scsi0 : ahci [ 20.678756] scsi1 : ahci [ 20.678788] scsi2 : ahci [ 20.678857] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 507 [ 20.678860] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 507 [ 20.678863] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 507 [ 21.153399] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.155655] ata1.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 21.155656] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 21.156452] ata1.00: configured for UDMA/133 [ 21.464966] ata2: SATA link down (SStatus 0 SControl 300) [ 21.776526] ata3: SATA link down (SStatus 0 SControl 300) [ 21.776616] scsi 0:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 21.776717] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 21.777656] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 21.777662] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.777706] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 21.781629] ehci_hcd 0000:00:1a.7: debug port 1 [ 21.781636] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 21.781641] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 21.796498] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 21.796508] sd 0:0:0:0: [sda] Write Protect is off [ 21.796509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.796522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.796565] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 21.796572] sd 0:0:0:0: [sda] Write Protect is off [ 21.796573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.796584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.796586] sda:<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.797570] usb usb3: configuration #1 chosen from 1 choice [ 21.797589] hub 3-0:1.0: USB hub found [ 21.797595] hub 3-0:1.0: 4 ports detected [ 21.799536] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 21.841384] sd 0:0:0:0: [sda] Attached SCSI disk [ 21.844958] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.901437] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 21.902366] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.902372] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.902424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 21.906344] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.906350] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.906359] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 21.921300] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.921391] usb usb4: configuration #1 chosen from 1 choice [ 21.921412] hub 4-0:1.0: USB hub found [ 21.921417] hub 4-0:1.0: 6 ports detected [ 22.025331] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 22.025751] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 22.025761] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 22.025764] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 22.025783] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 22.025810] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 22.025895] usb usb5: configuration #1 chosen from 1 choice [ 22.025913] hub 5-0:1.0: USB hub found [ 22.025918] hub 5-0:1.0: 2 ports detected [ 22.075440] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 22.129092] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 22.129103] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 22.129107] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 22.129129] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 22.129157] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 22.129241] usb usb6: configuration #1 chosen from 1 choice [ 22.129258] hub 6-0:1.0: USB hub found [ 22.129263] hub 6-0:1.0: 2 ports detected [ 22.232942] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 22.232950] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 22.232953] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 22.232969] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 22.232995] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 22.233076] usb usb7: configuration #1 chosen from 1 choice [ 22.233093] hub 7-0:1.0: USB hub found [ 22.233098] hub 7-0:1.0: 2 ports detected [ 22.316309] Attempting manual resume [ 22.316311] swsusp: Resume From Partition 8:6 [ 22.316312] PM: Checking swsusp image. [ 22.316524] PM: Resume from disk failed. [ 22.336904] ata_piix 0000:00:1f.1: version 2.12 [ 22.336922] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 22.336953] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 22.337859] scsi3 : ata_piix [ 22.338471] scsi4 : ata_piix [ 22.338531] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 22.338533] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 22.350547] kjournald starting. Commit interval 5 seconds [ 22.350556] EXT3-fs: mounted filesystem with ordered data mode. [ 22.584403] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 22.655828] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 22.719763] usb 3-2: configuration #1 chosen from 1 choice [ 22.827488] ata4.00: configured for UDMA/33 [ 22.958883] usb 4-4: new high speed USB device using ehci_hcd and address 2 [ 22.996125] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 22.996175] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 23.157670] usb 4-4: configuration #1 chosen from 1 choice [ 23.347397] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030293d09b] [ 23.522097] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 23.695327] usb 1-1: configuration #1 chosen from 1 choice [ 29.413936] iTCO_vendor_support: vendor-support=0 [ 29.451495] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 29.451564] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 29.451573] iTCO_wdt: No card detected [ 29.677982] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.742516] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.794506] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.810598] agpgart: Detected an Intel 965GM Chipset. [ 29.812166] agpgart: Detected 7676K stolen memory. [ 29.824497] agpgart: AGP aperture is 256M @ 0xd0000000 [ 29.888330] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 29.971012] input: Power Button (CM) as /devices/virtual/input/input3 [ 30.029062] ACPI: Power Button (CM) [PWRB] [ 30.029106] input: Lid Switch as /devices/virtual/input/input4 [ 30.030106] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 30.030131] Yenta: Using CSCINT to route CSC interrupts to PCI [ 30.030132] Yenta: Routing CardBus interrupts to PCI [ 30.030138] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 30.062942] ACPI: Lid Switch [LID0] [ 30.146484] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 30.184836] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 30.189897] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 30.189903] sony-laptop: detected Type2 model [ 30.205829] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/SNY6001:00/input/input6 [ 30.257779] input: Sony Vaio Jogdial as /devices/virtual/input/input7 [ 30.262526] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 30.262529] Socket status: 30000006 [ 30.262531] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 30.262536] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 30.288432] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 30.305690] sony-laptop: device allocated minor is 63 [ 30.379027] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.379031] Uniform CD-ROM driver Revision: 3.20 [ 30.379072] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 30.385428] input: PS/2 Mouse as /devices/virtual/input/input8 [ 30.388945] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 30.388980] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 30.389920] sky2 0000:07:00.0: v1.20 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 30.391106] sky2 eth0: addr 00:1a:80:57:41:ac [ 30.444494] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 30.504648] ACPI: AC Adapter [ACAD] (on-line) [ 30.518628] ACPI: Battery Slot [BAT1] (battery present) [ 30.518642] sony-laptop: Sony Notebook Control Driver v0.5. [ 30.556614] usbcore: registered new interface driver libusual [ 30.593109] Initializing USB Mass Storage driver... [ 30.593840] scsi5 : SCSI emulation for USB Mass Storage devices [ 30.593924] usbcore: registered new interface driver usb-storage [ 30.593927] USB Mass Storage support registered. [ 30.593929] usb-storage: device found at 2 [ 30.593930] usb-storage: waiting for device to settle before scanning [ 30.622111] Linux video capture interface: v2.00 [ 30.747763] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds [ 30.747767] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 30.748510] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 30.748520] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 30.749386] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 30.768331] uvcvideo: Found UVC 1.00 device (05ca:183a) [ 30.768755] usbcore: registered new interface driver uvcvideo [ 30.768758] USB Video Class driver (v0.1.0) [ 30.972833] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 30.973662] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 31.259453] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 31.260701] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 32.522878] lp: driver loaded but no devices found [ 32.601872] Adding 4096532k swap on /dev/sda6. Priority:-1 extents:1 across:4096532k [ 33.047099] EXT3 FS on sda5, internal journal [ 34.045042] kjournald starting. Commit interval 5 seconds [ 34.045252] EXT3 FS on sda2, internal journal [ 34.045256] EXT3-fs: mounted filesystem with ordered data mode. [ 34.066654] kjournald starting. Commit interval 5 seconds [ 34.066910] EXT3 FS on sda3, internal journal [ 34.066913] EXT3-fs: mounted filesystem with ordered data mode. [ 34.956421] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 35.009011] ACPI: ACPI Dock Station Driver [ 35.591455] usb-storage: device scan complete [ 35.595812] scsi 5:0:0:0: Direct-Access Sony USB HS-CARD 4.82 PQ: 0 ANSI: 0 [ 35.630383] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 35.630420] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 36.238330] ppdev: user-space parallel port driver [ 37.817361] sky2 eth0: enabling interface [ 38.003789] Bluetooth: Core ver 2.11 [ 38.003916] NET: Registered protocol family 31 [ 38.003920] Bluetooth: HCI device and connection manager initialized [ 38.003927] Bluetooth: HCI socket layer initialized [ 38.065766] Bluetooth: L2CAP ver 2.9 [ 38.065769] Bluetooth: L2CAP socket layer initialized [ 38.142120] Bluetooth: RFCOMM socket layer initialized [ 38.142148] Bluetooth: RFCOMM TTY layer initialized [ 38.142152] Bluetooth: RFCOMM ver 1.8 [ 41.889913] [drm] Initialized drm 1.1.0 20060810 [ 41.891433] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.891469] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 41.908656] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 59.846895] NET: Registered protocol family 10 [ 59.847525] lo: Disabled Privacy Extensions [ 59.848600] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.849709] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 74.663164] NET: Registered protocol family 17 [ 76.426222] wlan0: Initial auth_alg=0 [ 76.426233] wlan0: authenticate with AP 00:16:01:59:bd:a4 [ 76.428131] wlan0: RX authentication from 00:16:01:59:bd:a4 (alg=0 transaction=2 status=0) [ 76.428137] wlan0: authenticated [ 76.428142] wlan0: associate with AP 00:16:01:59:bd:a4 [ 76.430687] wlan0: RX AssocResp from 00:16:01:59:bd:a4 (capab=0x411 status=0 aid=3) [ 76.430693] wlan0: associated [ 76.430699] wlan0: switched to short barker preamble (BSSID=00:16:01:59:bd:a4) [ 76.442063] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 80.348169] CPU0 attaching NULL sched-domain. [ 80.348180] CPU1 attaching NULL sched-domain. [ 80.363179] CPU0 attaching sched-domain: [ 80.363187] domain 0: span 03 [ 80.363191] groups: 01 02 [ 80.363198] domain 1: span 03 [ 80.363201] groups: 03 [ 80.363206] CPU1 attaching sched-domain: [ 80.363209] domain 0: span 03 [ 80.363212] groups: 02 01 [ 80.363217] domain 1: span 03 [ 80.363220] groups: 03 [ 93.656476] wlan0: no IPv6 routers present