[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-06) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000dffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ff6ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ff70000-0x000000003ff7bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ff7c000-0x000000003ff7ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003ff80000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffbfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Sony Corporation BI, BIOS R0072G4 12/23/2004 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3ff70 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1048064KB, range: 512KB, type UC [ 0.000000] total RAM covered: 1023M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1048064KB, range: 512KB, type UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE [ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33ce4000-0x35e69fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F69D0 000014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 0x000000003FF78079 000030 (v01 SONY G4 20041223 PTL 00000000) [ 0.000000] ACPI: FACP 0x000000003FF7BEC2 000084 (v02 SONY G4 20041223 PTL 00000050) [ 0.000000] ACPI: DSDT 0x000000003FF78515 0039AD (v01 SONY G4 20041223 PTL 0100000E) [ 0.000000] ACPI: FACS 0x000000003FF7CFC0 000040 [ 0.000000] ACPI: BOOT 0x000000003FF7BFD8 000028 (v01 SONY G4 20041223 PTL 00000001) [ 0.000000] ACPI: SSDT 0x000000003FF780A9 000296 (v01 SONY G4 20041223 PTL 00000000) [ 0.000000] 131MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff] [ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000003ff6ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ff6ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ff6ffff] [ 0.000000] On node 0 totalpages: 261902 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 33650 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xff7fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 19 pages/cpu @f71c4000 s47436 r0 d30388 u77824 [ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259672 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=bd72585a-d915-40bc-915f-8cea19afdb28 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003ff70) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 988356K/1047608K available (7842K kernel code, 759K rwdata, 3116K rodata, 940K init, 800K bss, 59252K reserved, 0K cma-reserved, 134600K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1b75000 - 0xc1c60000 ( 940 kB) .data : 0xc17a8ed3 - 0xc1b73f80 (3884 kB) .text : 0xc1000000 - 0xc17a8ed3 (7843 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=f6c34000 soft=f6c36000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 1048576 bytes of page_ext [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1497.138 MHz processor [ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.27 BogoMIPS (lpj=5988552) [ 0.004033] pid_max: default: 32768 minimum: 301 [ 0.004060] ACPI: Core revision 20150930 [ 0.011323] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.011368] Security Framework initialized [ 0.011373] Yama: becoming mindful. [ 0.011415] AppArmor: AppArmor initialized [ 0.011520] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.011525] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.012016] Initializing cgroup subsys io [ 0.012027] Initializing cgroup subsys memory [ 0.012044] Initializing cgroup subsys devices [ 0.012050] Initializing cgroup subsys freezer [ 0.012057] Initializing cgroup subsys net_cls [ 0.012063] Initializing cgroup subsys perf_event [ 0.012069] Initializing cgroup subsys net_prio [ 0.012075] Initializing cgroup subsys hugetlb [ 0.012085] Initializing cgroup subsys pids [ 0.012121] Disabled fast string operations [ 0.012135] mce: CPU supports 5 MCE banks [ 0.012163] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.012167] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.026712] Freeing SMP alternatives memory: 28K (c1c60000 - c1c67000) [ 0.032008] ftrace: allocating 31158 entries in 61 pages [ 0.044193] smpboot: Max logical packages: 1 [ 0.044203] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.044205] smpboot: SMP motherboard not detected [ 0.044208] smpboot: SMP disabled [ 0.044211] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.044230] Performance Events: [ 0.044235] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.044237] no hardware sampling interrupt available. [ 0.044241] p6 PMU driver. [ 0.044245] ... version: 0 [ 0.044247] ... bit width: 32 [ 0.044249] ... generic registers: 2 [ 0.044252] ... value mask: 00000000ffffffff [ 0.044254] ... max period: 000000007fffffff [ 0.044256] ... fixed-purpose events: 0 [ 0.044258] ... event mask: 0000000000000003 [ 0.048861] x86: Booted up 1 node, 1 CPUs [ 0.048867] smpboot: Total of 1 processors activated (2994.27 BogoMIPS) [ 0.049004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.049118] devtmpfs: initialized [ 0.049639] evm: security.selinux [ 0.049642] evm: security.SMACK64 [ 0.049644] evm: security.SMACK64EXEC [ 0.049646] evm: security.SMACK64TRANSMUTE [ 0.049648] evm: security.SMACK64MMAP [ 0.049650] evm: security.ima [ 0.049652] evm: security.capability [ 0.049822] PM: Registering ACPI NVS region [mem 0x3ff7c000-0x3ff7ffff] (16384 bytes) [ 0.049980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.050090] pinctrl core: initialized pinctrl subsystem [ 0.050305] RTC time: 4:36:03, date: 06/09/16 [ 0.050542] NET: Registered protocol family 16 [ 0.050932] EISA bus registered [ 0.050938] cpuidle: using governor ladder [ 0.050942] cpuidle: using governor menu [ 0.050946] PCCT header not found. [ 0.051074] Simple Boot Flag at 0x36 set to 0x1 [ 0.051090] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.051134] ACPI: bus type PCI registered [ 0.051139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.062536] PCI: PCI BIOS revision 2.10 entry at 0xfd9c3, last bus=2 [ 0.062539] PCI: Using configuration type 1 for base access [ 0.066122] ACPI: Added _OSI(Module Device) [ 0.066127] ACPI: Added _OSI(Processor Device) [ 0.066130] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.066133] ACPI: Added _OSI(Processor Aggregator Device) [ 0.070368] ACPI : EC: EC started [ 0.070474] ACPI: Interpreter enabled [ 0.070490] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.070498] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.070521] ACPI: (supports S0 S3 S4 S5) [ 0.070524] ACPI: Using PIC for interrupt routing [ 0.070552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.077651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.077662] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.077672] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.077679] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.078401] PCI host bridge to bus 0000:00 [ 0.078407] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.078411] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.078416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.078420] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.078424] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.078428] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.078432] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window] [ 0.078436] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.078452] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000 [ 0.078469] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.078617] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400 [ 0.078789] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.078839] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f] [ 0.078946] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.079038] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.079087] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f] [ 0.079192] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.079283] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.079333] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f] [ 0.079437] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.079539] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.079572] pci 0000:00:1d.7: reg 0x10: [mem 0xd0000000-0xd00003ff] [ 0.079659] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.079719] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.079809] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400 [ 0.079902] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.079988] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100 [ 0.080077] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015] [ 0.080084] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.080213] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a [ 0.080232] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.080243] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.080255] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.080266] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.080278] pci 0000:00:1f.1: reg 0x20: [io 0x1860-0x186f] [ 0.080290] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff] [ 0.080305] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.080309] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.080313] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.080316] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.080449] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500 [ 0.080498] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f] [ 0.080648] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.080671] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff] [ 0.080682] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff] [ 0.080693] pci 0000:00:1f.5: reg 0x18: [mem 0xd0000c00-0xd0000dff] [ 0.080704] pci 0000:00:1f.5: reg 0x1c: [mem 0xd0000800-0xd00008ff] [ 0.080750] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.080889] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300 [ 0.080912] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff] [ 0.080923] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f] [ 0.080982] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.081038] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 0.081195] pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000 [ 0.081218] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref] [ 0.081227] pci 0000:01:00.0: reg 0x14: [io 0x3000-0x30ff] [ 0.081237] pci 0000:01:00.0: reg 0x18: [mem 0xd0100000-0xd010ffff] [ 0.081263] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.081291] pci 0000:01:00.0: supports D1 D2 [ 0.081409] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.081415] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.081420] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.081425] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.081561] pci 0000:02:04.0: [104c:ac8e] type 02 class 0x060700 [ 0.081586] pci 0000:02:04.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.081615] pci 0000:02:04.0: supports D1 D2 [ 0.081619] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot [ 0.081748] pci 0000:02:04.2: [104c:802e] type 00 class 0x0c0010 [ 0.081773] pci 0000:02:04.2: reg 0x10: [mem 0xd0207000-0xd02077ff] [ 0.081785] pci 0000:02:04.2: reg 0x14: [mem 0xd0200000-0xd0203fff] [ 0.081851] pci 0000:02:04.2: supports D1 D2 [ 0.081855] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot [ 0.081981] pci 0000:02:04.3: [104c:ac8f] type 00 class 0x018000 [ 0.082005] pci 0000:02:04.3: reg 0x10: [mem 0xd0204000-0xd0204fff] [ 0.082077] pci 0000:02:04.3: supports D1 D2 [ 0.082081] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot [ 0.082211] pci 0000:02:08.0: [8086:103d] type 00 class 0x020000 [ 0.082235] pci 0000:02:08.0: reg 0x10: [mem 0xd0205000-0xd0205fff] [ 0.082246] pci 0000:02:08.0: reg 0x14: [io 0x4000-0x403f] [ 0.082308] pci 0000:02:08.0: supports D1 D2 [ 0.082312] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082352] pci 0000:02:08.0: System wakeup disabled by ACPI [ 0.082449] pci 0000:02:0b.0: [8086:4220] type 00 class 0x028000 [ 0.082474] pci 0000:02:0b.0: reg 0x10: [mem 0xd0206000-0xd0206fff] [ 0.082548] pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold [ 0.082688] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.082695] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 0.082701] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff] [ 0.082707] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.082712] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.082716] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.082720] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.082724] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.082728] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.082732] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode) [ 0.082738] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.082807] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02] (conflicts with (null) [bus 02]) [ 0.082815] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06 [ 0.082819] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02] (conflicts with (null) [bus 02]) [ 0.082826] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02] [ 0.082831] pci 0000:00:1e.0: bridge has subordinate 02 but max busn 06 [ 0.082843] pci_bus 0000:00: on NUMA node 0 [ 0.082999] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 0.083104] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 0.083207] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. [ 0.083310] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) [ 0.083412] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 0.083513] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled. [ 0.083615] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. [ 0.083717] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 0.084255] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.084471] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.084475] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.084479] vgaarb: loaded [ 0.084482] vgaarb: bridge control possible 0000:01:00.0 [ 0.085076] SCSI subsystem initialized [ 0.085146] libata version 3.00 loaded. [ 0.085201] ACPI: bus type USB registered [ 0.085246] usbcore: registered new interface driver usbfs [ 0.085269] usbcore: registered new interface driver hub [ 0.085292] usbcore: registered new device driver usb [ 0.085578] PCI: Using ACPI for IRQ routing [ 0.085583] PCI: pci_cache_line_size set to 64 bytes [ 0.085642] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.085646] e820: reserve RAM buffer [mem 0x3ff70000-0x3fffffff] [ 0.085900] NetLabel: Initializing [ 0.085903] NetLabel: domain hash size = 128 [ 0.085905] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.085928] NetLabel: unlabeled traffic allowed by default [ 0.086190] clocksource: Switched to clocksource pit [ 0.103236] AppArmor: AppArmor Filesystem Enabled [ 0.103422] pnp: PnP ACPI init [ 0.103921] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.104072] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.104078] system 00:01: [io 0x0700-0x070f] has been reserved [ 0.104083] system 00:01: [io 0x1000-0x107f] could not be reserved [ 0.104088] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.104093] system 00:01: [io 0xfe00-0xfe01] has been reserved [ 0.104097] system 00:01: [io 0xfe10-0xfe17] has been reserved [ 0.104104] system 00:01: [mem 0xfebfe000-0xfebfefff] has been reserved [ 0.104170] system 00:01: [mem 0xfebff000-0xfebfffff] has been reserved [ 0.104175] system 00:01: [mem 0xfec00000-0xfec00fff] has been reserved [ 0.104182] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.104670] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.104737] pnp 00:03: Plug and Play ACPI device, IDs SNY900a PNP0f13 (active) [ 0.104780] pnp: PnP ACPI: found 4 devices [ 0.104790] PnPBIOS: Disabled by ACPI PNP [ 0.143260] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.143292] clocksource: Switched to clocksource acpi_pm [ 0.143332] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143337] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143346] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02] add_size 4000000 add_align 4000000 [ 0.143356] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 0.143363] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143368] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143383] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 0.143391] pci 0000:00:1f.1: BAR 5: assigned [mem 0x44000000-0x440003ff] [ 0.143402] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref] [ 0.143407] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.143412] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.143418] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.143423] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.143434] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143439] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143444] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143449] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.143454] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.143458] pci 0000:02:04.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.143463] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.143467] pci 0000:02:04.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.143475] pci 0000:02:04.0: BAR 0: assigned [mem 0x48000000-0x48000fff] [ 0.143483] pci 0000:02:04.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 0.143490] pci 0000:02:04.0: BAR 16: assigned [mem 0x4c000000-0x4fffffff] [ 0.143495] pci 0000:02:04.0: BAR 13: assigned [io 0x4400-0x44ff] [ 0.143499] pci 0000:02:04.0: BAR 14: assigned [io 0x4800-0x48ff] [ 0.143504] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.143508] pci 0000:02:04.0: bridge window [io 0x4400-0x44ff] [ 0.143514] pci 0000:02:04.0: bridge window [io 0x4800-0x48ff] [ 0.143520] pci 0000:02:04.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 0.143526] pci 0000:02:04.0: bridge window [mem 0x4c000000-0x4fffffff] [ 0.143532] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.143537] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 0.143544] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff] [ 0.143551] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 0.143561] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.143565] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.143569] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.143573] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.143577] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.143581] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window] [ 0.143585] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff window] [ 0.143589] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.143593] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.143597] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref] [ 0.143602] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.143606] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff] [ 0.143610] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] [ 0.143614] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.143618] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.143622] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.143626] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.143630] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.143634] pci_bus 0000:02: resource 9 [mem 0x000e0000-0x000e3fff window] [ 0.143638] pci_bus 0000:02: resource 10 [mem 0x40000000-0xfebfffff window] [ 0.143642] pci_bus 0000:03: resource 0 [io 0x4400-0x44ff] [ 0.143646] pci_bus 0000:03: resource 1 [io 0x4800-0x48ff] [ 0.143650] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] [ 0.143654] pci_bus 0000:03: resource 3 [mem 0x4c000000-0x4fffffff] [ 0.143720] NET: Registered protocol family 2 [ 0.144147] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.144193] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.144269] TCP: Hash tables configured (established 8192 bind 8192) [ 0.144361] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.144383] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.144475] NET: Registered protocol family 1 [ 0.144634] pci 0000:01:00.0: Video device with shadowed ROM [ 0.144656] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.144664] PCI: CLS 64 bytes, default 64 [ 0.144774] Trying to unpack rootfs image as initramfs... [ 1.382296] Freeing initrd memory: 34328K (f3ce4000 - f5e6a000) [ 1.382782] Scanning for low memory corruption every 60 seconds [ 1.383564] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.383629] audit: initializing netlink subsys (disabled) [ 1.383683] audit: type=2000 audit(1465446964.379:1): initialized [ 1.384449] Initialise system trusted keyring [ 1.384679] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.388777] zbud: loaded [ 1.388983] VFS: Disk quotas dquot_6.6.0 [ 1.389075] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.390197] fuse init (API version 7.23) [ 1.390535] Key type big_key registered [ 1.391084] Key type asymmetric registered [ 1.391090] Asymmetric key parser 'x509' registered [ 1.391127] bounce: pool size: 64 pages [ 1.391218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.391271] io scheduler noop registered [ 1.391277] io scheduler deadline registered (default) [ 1.391355] io scheduler cfq registered [ 1.391678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.391693] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.391767] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.391769] vesafb: scrolling: redraw [ 1.391773] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.391804] vesafb: framebuffer at 0xd8000000, mapped to 0xf8600000, using 3072k, total 3072k [ 1.392059] Console: switching to colour frame buffer device 128x48 [ 1.392109] fb0: VESA VGA frame buffer device [ 1.392146] intel_idle: does not run on family 6 model 13 [ 1.392489] ACPI: AC Adapter [ACAD] (on-line) [ 1.392627] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.392770] ACPI: Lid Switch [LID0] [ 1.392864] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.392870] ACPI: Power Button [PWRB] [ 1.393093] tsc: Marking TSC unstable due to TSC halts in idle [ 1.393101] ACPI: acpi_idle registered with cpuidle [ 1.395998] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.396002] ACPI: Thermal Zone [ATF0] (60 C) [ 1.396250] GHES: HEST is not enabled! [ 1.396681] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.398776] ACPI: Battery Slot [BAT1] (battery present) [ 1.398841] isapnp: Scanning for PnP cards... [ 1.407097] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 1.407101] PCI: setting IRQ 9 as level-triggered [ 1.407869] Linux agpgart interface v0.103 [ 1.408052] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.465932] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.471845] brd: module loaded [ 1.517964] loop: module loaded [ 1.518445] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 1.518451] ata_piix 0000:00:1f.1: version 2.13 [ 1.518463] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.520115] scsi host0: ata_piix [ 1.520279] scsi host1: ata_piix [ 1.520376] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 1.520379] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 1.520580] libphy: Fixed MDIO Bus: probed [ 1.520586] tun: Universal TUN/TAP device driver, 1.6 [ 1.520588] tun: (C) 1999-2004 Max Krasnyansky [ 1.520820] PPP generic driver version 2.4.2 [ 1.520949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.520958] ehci-pci: EHCI PCI platform driver [ 1.521254] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 1.521303] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.521316] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.521334] ehci-pci 0000:00:1d.7: debug port 1 [ 1.525267] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.525287] ehci-pci 0000:00:1d.7: irq 9, io mem 0xd0000000 [ 1.569037] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.569162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.569167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.569171] usb usb1: Product: EHCI Host Controller [ 1.569174] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd [ 1.569178] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.569421] hub 1-0:1.0: USB hub found [ 1.569436] hub 1-0:1.0: 6 ports detected [ 1.569788] ehci-platform: EHCI generic platform driver [ 1.569812] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.569820] ohci-pci: OHCI PCI platform driver [ 1.569845] ohci-platform: OHCI generic platform driver [ 1.569864] uhci_hcd: USB Universal Host Controller Interface driver [ 1.570151] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 1.570169] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.570183] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.570192] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.570213] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 1.570292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.570297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.570301] usb usb2: Product: UHCI Host Controller [ 1.570304] usb usb2: Manufacturer: Linux 4.4.0-21-generic uhci_hcd [ 1.570308] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.570523] hub 2-0:1.0: USB hub found [ 1.570536] hub 2-0:1.0: 2 ports detected [ 1.570985] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 1.571003] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.571012] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.571020] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.571041] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820 [ 1.571121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.571126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.571129] usb usb3: Product: UHCI Host Controller [ 1.571133] usb usb3: Manufacturer: Linux 4.4.0-21-generic uhci_hcd [ 1.571136] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.571362] hub 3-0:1.0: USB hub found [ 1.571374] hub 3-0:1.0: 2 ports detected [ 1.571820] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 1.571838] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.571848] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.571856] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.571877] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840 [ 1.571955] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.571959] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.571963] usb usb4: Product: UHCI Host Controller [ 1.571967] usb usb4: Manufacturer: Linux 4.4.0-21-generic uhci_hcd [ 1.571970] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.572211] hub 4-0:1.0: USB hub found [ 1.572224] hub 4-0:1.0: 2 ports detected [ 1.572527] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.575353] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.575362] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.575638] mousedev: PS/2 mouse device common for all mice [ 1.575888] rtc_cmos 00:00: RTC can wake from S4 [ 1.576076] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.576098] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.576115] i2c /dev entries driver [ 1.576250] device-mapper: uevent: version 1.0.3 [ 1.576401] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.576450] platform eisa.0: Probing EISA bus 0 [ 1.576455] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.576459] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.576463] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.576467] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.576471] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.576475] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.576479] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.576483] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.576487] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.576491] platform eisa.0: EISA: Detected 0 cards [ 1.576514] cpufreq-nforce2: No nForce2 chipset. [ 1.576526] ledtrig-cpu: registered to indicate activity on CPUs [ 1.577117] NET: Registered protocol family 10 [ 1.577571] NET: Registered protocol family 17 [ 1.577595] Key type dns_resolver registered [ 1.577948] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17 [ 1.578011] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.578029] Using IPI No-Shortcut mode [ 1.578303] registered taskstats version 1 [ 1.578332] Loading compiled-in X.509 certificates [ 1.585181] Loaded X.509 cert 'Build time autogenerated kernel key: 56e7e8a60ca69c909b96ce2276e3015b6f9a0d81' [ 1.585211] zswap: loaded using pool lzo/zbud [ 1.588727] Key type trusted registered [ 1.637951] Key type encrypted registered [ 1.637962] AppArmor: AppArmor sha1 policy hashing enabled [ 1.637969] ima: No TPM chip found, activating TPM-bypass! [ 1.638006] evm: HMAC attrs: 0x1 [ 1.638397] Magic number: 4:677:615 [ 1.638419] misc tun: hash matches [ 1.638553] rtc_cmos 00:00: setting system clock to 2016-06-09 04:36:05 UTC (1465446965) [ 1.682507] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.682509] EDD information not available. [ 1.682628] PM: Hibernation image not present or could not be loaded. [ 1.726960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.727740] ata2.00: ATAPI: UJDA765aDVD/CDRW, 1.01, max UDMA/33 [ 1.728148] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100 [ 1.728152] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.771966] isapnp: No Plug & Play device found [ 1.772626] ata2.00: configured for UDMA/33 [ 1.780439] ata1.00: configured for UDMA/100 [ 1.780623] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 A60A PQ: 0 ANSI: 5 [ 1.780990] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.781143] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.781232] sd 0:0:0:0: [sda] Write Protect is off [ 1.781237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.781277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.783174] scsi 1:0:0:0: CD-ROM MATSHITA UJDA765aDVD/CDRW 1.01 PQ: 0 ANSI: 5 [ 1.797251] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.797256] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.797475] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.797662] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.818759] sda: sda1 sda2 sda3 sda4 [ 1.819377] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.819969] Freeing unused kernel memory: 940K (c1b75000 - c1c60000) [ 1.820118] Write protecting the kernel text: 7844k [ 1.820168] Write protecting the kernel read-only data: 3124k [ 1.838596] random: udevadm urandom read with 20 bits of entropy available [ 1.976713] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.020054] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 2.079135] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.079142] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.079452] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 2.128388] [drm] Initialized drm 1.1.0 20060810 [ 2.135128] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 2.195115] e100 0000:02:08.0 eth0: addr 0xd0205000, irq 9, MAC addr 00:01:4a:1c:3a:56 [ 2.196437] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 2.220001] usb 3-1: New USB device found, idVendor=093a, idProduct=2510 [ 2.220041] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.220045] usb 3-1: Product: USB Optical Mouse [ 2.220049] usb 3-1: Manufacturer: PixArt [ 2.238402] e100 0000:02:08.0 enp2s8: renamed from eth0 [ 2.252175] firewire_ohci 0000:02:04.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.274474] hidraw: raw HID events driver (C) Jiri Kosina [ 2.386004] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159492fe27c, max_idle_ns: 440795211682 ns [ 2.388676] usbcore: registered new interface driver usbhid [ 2.388680] usbhid: USB HID core driver [ 2.398563] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input5 [ 2.399242] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 2.421427] [drm] radeon kernel modesetting enabled. [ 2.421606] checking generic (d8000000 300000) vs hw (d8000000 8000000) [ 2.421610] fb: switching to radeondrmfb from VESA VGA [ 2.421671] Console: switching to colour dummy device 80x25 [ 2.424453] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x104D:0x8196). [ 2.424480] [drm] register mmio base: 0xD0100000 [ 2.424482] [drm] register mmio size: 65536 [ 2.425661] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 2.425674] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 2.425705] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 2.425728] radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF [ 2.425733] [drm] Generation 2 PCI interface, using max accessible memory [ 2.425739] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used) [ 2.425756] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 2.425760] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.425764] usb 4-2: Product: UGX [ 2.425767] usb 4-2: Manufacturer: ALPS [ 2.426656] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.426663] [drm] RAM width 128bits DDR [ 2.426806] [TTM] Zone kernel: Available graphics memory: 444526 kiB [ 2.426808] [TTM] Zone highmem: Available graphics memory: 511826 kiB [ 2.426811] [TTM] Initializing pool allocator [ 2.426822] [TTM] Initializing DMA pool allocator [ 2.426871] [drm] radeon: 64M of VRAM memory ready [ 2.426874] [drm] radeon: 256M of GTT memory ready. [ 2.426913] [drm] radeon: power management initialized [ 2.426939] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 2.427972] radeon 0000:01:00.0: WB disabled [ 2.427986] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf8412000 [ 2.427991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.427993] [drm] Driver supports precise vblank timestamp query. [ 2.432153] [drm] radeon: irq initialized. [ 2.432172] [drm] Loading R300 Microcode [ 2.432442] [drm] radeon: ring at 0x00000000E0001000 [ 2.432470] [drm] ring test succeeded in 1 usecs [ 2.432692] [drm] ib test succeeded in 0 usecs [ 2.434521] [drm] Panel ID String: WXGA 1280x800 - Sony [ 2.434525] [drm] Panel Size 1280x800 [ 2.434839] [drm] Radeon Display Connectors [ 2.434842] [drm] Connector 0: [ 2.434845] [drm] VGA-1 [ 2.434848] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.434850] [drm] Encoders: [ 2.434853] [drm] CRT1: INTERNAL_DAC1 [ 2.434855] [drm] Connector 1: [ 2.434857] [drm] DVI-D-1 [ 2.434859] [drm] HPD1 [ 2.434862] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 2.434863] [drm] Encoders: [ 2.434865] [drm] DFP1: INTERNAL_TMDS1 [ 2.434867] [drm] Connector 2: [ 2.434869] [drm] LVDS-1 [ 2.434871] [drm] Encoders: [ 2.434873] [drm] LCD1: INTERNAL_LVDS [ 2.482492] [drm] fb mappable at 0xD8040000 [ 2.482495] [drm] vram apper at 0xD8000000 [ 2.482497] [drm] size 4096000 [ 2.482499] [drm] fb depth is 24 [ 2.482501] [drm] pitch is 5120 [ 2.483345] fbcon: radeondrmfb (fb0) is primary device [ 2.483760] Console: switching to colour frame buffer device 160x50 [ 2.483825] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 2.483838] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 2.752250] firewire_core 0000:02:04.2: created device fw0: GUID 0800460301dc5804, S400 [ 3.120852] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4 [ 3.337277] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 3.349555] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 3.836038] random: nonblocking pool is initialized [ 5.001741] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.001918] systemd[1]: Detected architecture x86. [ 5.018521] systemd[1]: Set hostname to . [ 5.778909] systemd[1]: Listening on udev Kernel Socket. [ 5.779064] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.779311] systemd[1]: Created slice User and Session Slice. [ 5.779555] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.779635] systemd[1]: Listening on Syslog Socket. [ 5.779696] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.779729] systemd[1]: Reached target User and Group Name Lookups. [ 5.779906] systemd[1]: Created slice System Slice. [ 5.780171] systemd[1]: Created slice system-getty.slice. [ 5.780204] systemd[1]: Reached target Slices. [ 5.780336] systemd[1]: Listening on Journal Audit Socket. [ 5.780415] systemd[1]: Listening on Journal Socket. [ 5.781357] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.782220] systemd[1]: Starting Nameserver information manager... [ 5.783071] systemd[1]: Started Read required files in advance. [ 5.787394] systemd[1]: Starting Journal Service... [ 5.913538] systemd[1]: Mounting POSIX Message Queue File System... [ 5.913686] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.913814] systemd[1]: Listening on udev Control Socket. [ 5.914702] systemd[1]: Mounting Debug File System... [ 5.915634] systemd[1]: Starting Uncomplicated firewall... [ 5.916662] systemd[1]: Mounting Huge Pages File System... [ 6.131588] systemd[1]: Starting Load Kernel Modules... [ 6.131641] systemd[1]: Reached target Encrypted Volumes. [ 6.131778] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.131828] systemd[1]: Reached target Remote File Systems (Pre). [ 6.131866] systemd[1]: Reached target Remote File Systems. [ 6.299825] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.301053] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.352107] usb 4-2: USB disconnect, device number 2 [ 6.419194] systemd[1]: Started Load Kernel Modules. [ 6.420319] systemd[1]: Mounting FUSE Control File System... [ 6.421246] systemd[1]: Starting Apply Kernel Variables... [ 6.584982] systemd[1]: Started Uncomplicated firewall. [ 6.767282] systemd[1]: Mounted Huge Pages File System. [ 6.767352] systemd[1]: Mounted FUSE Control File System. [ 6.767392] systemd[1]: Mounted Debug File System. [ 6.767430] systemd[1]: Mounted POSIX Message Queue File System. [ 6.852049] usb 4-2: new full-speed USB device number 3 using uhci_hcd [ 6.890228] systemd[1]: Started Nameserver information manager. [ 7.012429] systemd[1]: Started Apply Kernel Variables. [ 7.054013] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 7.054021] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.054025] usb 4-2: Product: UGX [ 7.054029] usb 4-2: Manufacturer: ALPS [ 7.091666] systemd[1]: Started Journal Service. [ 9.715583] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 10.314686] systemd-journald[199]: Received request to flush runtime journal from PID 1 [ 11.706780] Bluetooth: Core ver 2.21 [ 11.706841] NET: Registered protocol family 31 [ 11.706844] Bluetooth: HCI device and connection manager initialized [ 11.711215] Bluetooth: HCI socket layer initialized [ 11.711228] Bluetooth: L2CAP socket layer initialized [ 11.711247] Bluetooth: SCO socket layer initialized [ 11.885948] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/SNY5001:00/input/input6 [ 11.886117] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/SNY5001:00/input/input7 [ 11.886831] sony_laptop: SNC setup done. [ 12.008926] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.196177] intel_rng: FWH not detected [ 12.320175] usbcore: registered new interface driver btusb [ 12.689100] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 [ 12.689109] PCI: setting IRQ 5 as level-triggered [ 12.712240] tifm_core: MMC/SD card detected in socket 0:0 [ 12.984187] yenta_cardbus 0000:02:04.0: CardBus bridge found [104d:818f] [ 12.984210] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI [ 12.984214] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 12.984220] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01001b22, devctl 0x64 [ 13.216678] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cd8, PCI irq 9 [ 13.216689] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 13.216695] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 13.216709] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 13.216714] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: [ 13.218047] excluding 0x4000-0x403f 0x4400-0x44ff 0x4800-0x48ff [ 13.224618] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff] [ 13.224624] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: [ 13.224630] excluding 0xd0200000-0xd020ffff [ 13.224648] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref] [ 13.224653] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: [ 13.224665] excluding 0x40000000-0x43ffffff [ 13.492360] lib80211: common routines for IEEE802.11 drivers [ 13.492368] lib80211_crypt: registered algorithm 'NULL' [ 13.574439] libipw: 802.11 data/management/control stack, git-1.1.13 [ 13.574446] libipw: Copyright (C) 2004-2005 Intel Corporation [ 13.857311] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 13.857318] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 13.857633] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 14.756426] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 14.760420] ipw2200 0000:02:0b.0 wlp2s11: renamed from eth0 [ 16.820047] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 55378 usecs (2668 samples) [ 16.820056] snd_intel8x0 0000:00:1f.5: clocking to 48000 [ 17.248534] Adding 1469940k swap on /dev/sda3. Priority:-1 extents:1 across:1469940k FS [ 17.459098] cfg80211: World regulatory domain updated: [ 17.459107] cfg80211: DFS Master region: unset [ 17.459110] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.459115] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.459119] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.459122] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 17.459126] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 17.459131] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 17.459134] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.459138] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.459141] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 19.380473] audit: type=1400 audit(1465446983.239:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=475 comm="apparmor_parser" [ 19.380492] audit: type=1400 audit(1465446983.239:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=475 comm="apparmor_parser" [ 19.762511] audit: type=1400 audit(1465446983.619:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=477 comm="apparmor_parser" [ 19.762531] audit: type=1400 audit(1465446983.619:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser" [ 19.762542] audit: type=1400 audit(1465446983.619:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=477 comm="apparmor_parser" [ 19.762553] audit: type=1400 audit(1465446983.619:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser" [ 20.240055] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 20.538461] audit: type=1400 audit(1465446984.395:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=478 comm="apparmor_parser" [ 20.538487] audit: type=1400 audit(1465446984.395:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=478 comm="apparmor_parser" [ 20.538498] audit: type=1400 audit(1465446984.395:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=478 comm="apparmor_parser" [ 20.538508] audit: type=1400 audit(1465446984.395:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=478 comm="apparmor_parser" [ 27.465098] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.465105] Bluetooth: BNEP filters: protocol multicast [ 27.465115] Bluetooth: BNEP socket layer initialized [ 35.316259] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready [ 35.333748] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready [ 35.345508] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 35.345611] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 36.124395] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 44.296205] usb 4-2: USB disconnect, device number 3 [ 44.608053] usb 4-2: new full-speed USB device number 4 using uhci_hcd [ 44.809722] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 44.809731] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.809735] usb 4-2: Product: UGX [ 44.809739] usb 4-2: Manufacturer: ALPS [ 47.154307] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 48.176045] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 48.476910] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 57.205794] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 58.212039] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 58.337779] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 71.073524] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 72.080033] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 72.216220] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 113.126438] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 114.152066] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 114.292753] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 180.373813] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 181.388056] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 181.514870] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 184.205872] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 185.220056] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 185.340974] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 187.360259] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 187.483341] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 187.500192] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 227.566606] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 228.580063] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 228.720308] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 236.953174] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 237.988049] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 238.108527] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 248.158343] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 248.298392] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 248.324192] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 254.854537] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 255.880062] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 256.001067] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 256.039498] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 258.035953] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 258.167001] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 262.233913] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 263.248056] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 263.385087] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 270.898208] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 271.912056] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 272.049297] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 279.670553] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 280.692060] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 280.802547] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 282.820222] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 282.936141] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 282.952710] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 290.313673] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 291.328057] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 291.454849] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 314.114250] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 315.128069] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 315.265273] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 320.070499] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 321.084046] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 321.221369] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 353.009825] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 354.004467] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 354.129910] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 354.168453] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 356.148150] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 356.390952] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 361.090879] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 362.104061] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 362.225429] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 362.261924] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 364.249144] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 364.378906] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 375.183082] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 376.208076] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 376.395659] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 388.536173] usb 4-2: USB disconnect, device number 4 [ 389.000069] usb 4-2: new full-speed USB device number 5 using uhci_hcd [ 389.202061] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 389.202077] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 389.202087] usb 4-2: Product: UGX [ 389.202096] usb 4-2: Manufacturer: ALPS [ 392.615456] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 393.632066] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 393.754361] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 393.812429] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 395.777814] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 395.917911] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 421.154472] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 422.172056] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 422.313687] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 424.970354] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 425.984073] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 426.122554] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 468.324067] usb 1-1: new high-speed USB device number 7 using ehci-pci [ 468.456697] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 468.456711] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 468.456721] usb 1-1: Product: USB 2.0 Hub [ 468.464274] hub 1-1:1.0: USB hub found [ 468.464437] hub 1-1:1.0: 4 ports detected [ 468.736071] usb 1-1.1: new high-speed USB device number 8 using ehci-pci [ 468.845133] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 468.845147] usb 1-1.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 468.845156] usb 1-1.1: Product: USB2.0 WLAN [ 468.845165] usb 1-1.1: Manufacturer: ATHEROS [ 468.845174] usb 1-1.1: SerialNumber: 12345 [ 470.348591] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 470.349545] usbcore: registered new interface driver ath9k_htc [ 470.662477] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 470.914680] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 471.182620] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 471.182635] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 471.182642] ath: EEPROM regdomain: 0x809c [ 471.182647] ath: EEPROM indicates we should expect a country code [ 471.182653] ath: doing EEPROM country->regdmn map search [ 471.182659] ath: country maps to regdmn code: 0x52 [ 471.182665] ath: Country alpha2 being used: CN [ 471.182670] ath: Regpair used: 0x52 [ 471.310177] ieee80211 phy1: Atheros AR9271 Rev:1 [ 471.355698] ath9k_htc 1-1.1:1.0 wlxf4ec388b04a9: renamed from wlan0 [ 471.399824] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 471.587602] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 471.629375] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 472.046455] cfg80211: Regulatory domain changed to country: CN [ 472.046463] cfg80211: DFS Master region: FCC [ 472.046466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 472.046471] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 472.046475] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 472.046480] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 472.046483] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 472.046487] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 472.046490] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 472.046494] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 473.090835] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 473.265334] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 473.267493] wlxf4ec388b04a9: authenticated [ 473.268291] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 473.278533] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 473.287628] wlxf4ec388b04a9: associated [ 473.287690] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 807.006487] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 807.040681] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null) [ 927.697036] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 928.575348] cfg80211: World regulatory domain updated: [ 928.575357] cfg80211: DFS Master region: unset [ 928.575360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 928.575365] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 928.575368] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 928.575372] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 928.575376] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 928.575381] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 928.575384] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 928.575388] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 928.575391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 931.651269] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 931.886126] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 932.652048] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 932.834502] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 932.850841] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 934.578435] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 934.761261] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 934.763102] wlxf4ec388b04a9: authenticated [ 934.764245] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 934.766848] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 934.776571] wlxf4ec388b04a9: associated [ 934.776634] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 942.839348] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 943.642705] cfg80211: World regulatory domain updated: [ 943.642713] cfg80211: DFS Master region: unset [ 943.642716] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 943.642721] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 943.642724] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 943.642728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 943.642732] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 943.642736] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 943.642740] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 943.642744] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 943.642747] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 944.790432] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 945.030443] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 945.792082] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 945.913758] ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. [ 950.008172] usb 4-2: USB disconnect, device number 5 [ 951.000081] usb 4-2: new full-speed USB device number 6 using uhci_hcd [ 951.202050] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 951.202058] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 951.202062] usb 4-2: Product: UGX [ 951.202066] usb 4-2: Manufacturer: ALPS [ 951.947865] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 952.264095] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 952.282560] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 952.312470] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 952.334319] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 953.971535] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 954.161025] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 954.165110] wlxf4ec388b04a9: authenticated [ 954.168291] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 954.170848] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 954.180507] wlxf4ec388b04a9: associated [ 954.181762] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 965.471608] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 966.344400] cfg80211: World regulatory domain updated: [ 966.344408] cfg80211: DFS Master region: unset [ 966.344411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 966.344416] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 966.344419] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 966.344423] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 966.344427] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 966.344432] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 966.344435] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 966.344439] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 966.344442] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 969.352198] usb 4-2: USB disconnect, device number 6 [ 969.896060] usb 4-2: new full-speed USB device number 7 using uhci_hcd [ 970.098070] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 970.098084] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 970.098094] usb 4-2: Product: UGX [ 970.098103] usb 4-2: Manufacturer: ALPS [ 971.422629] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 971.636941] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 972.424067] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 972.581747] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 972.586681] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 974.281889] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 974.468761] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 974.470697] wlxf4ec388b04a9: authenticated [ 974.472146] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 974.478130] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 974.488189] wlxf4ec388b04a9: associated [ 974.488252] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 1243.046077] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1244.052202] cfg80211: World regulatory domain updated: [ 1244.052212] cfg80211: DFS Master region: unset [ 1244.052215] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1244.052220] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1244.052224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1244.052227] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1244.052232] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1244.052236] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1244.052240] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1244.052243] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1244.052246] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1244.973376] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1245.197550] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1245.984067] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 1246.275812] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1246.279924] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1247.982608] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 1248.161315] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 1248.163674] wlxf4ec388b04a9: authenticated [ 1248.164461] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 1248.166998] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 1248.176612] wlxf4ec388b04a9: associated [ 1248.176677] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 1434.532660] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1435.529954] cfg80211: World regulatory domain updated: [ 1435.529962] cfg80211: DFS Master region: unset [ 1435.529966] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1435.529971] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1435.529974] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1435.529978] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1435.529982] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1435.529987] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1435.529990] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1435.529994] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1435.529997] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1436.475182] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1436.689916] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1437.476053] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 1437.627594] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1437.631642] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1439.133523] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 1439.315511] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 1439.317352] wlxf4ec388b04a9: authenticated [ 1439.320132] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 1439.322790] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 1439.333100] wlxf4ec388b04a9: associated [ 1439.333168] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 1465.705720] wlxf4ec388b04a9: deauthenticating from 62:1f:9f:c0:22:88 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1466.812042] cfg80211: World regulatory domain updated: [ 1466.812050] cfg80211: DFS Master region: unset [ 1466.812053] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1466.812058] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1466.812062] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1466.812065] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1466.812070] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1466.812074] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1466.812078] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1466.812081] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1466.812084] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1469.568165] usb 4-2: USB disconnect, device number 7 [ 1470.800067] usb 4-2: new full-speed USB device number 8 using uhci_hcd [ 1471.002039] usb 4-2: New USB device found, idVendor=044e, idProduct=3007 [ 1471.002052] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1471.002059] usb 4-2: Product: UGX [ 1471.002066] usb 4-2: Manufacturer: ALPS [ 1473.644902] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1473.862508] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1474.648059] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 1474.825530] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready [ 1474.828301] IPv6: ADDRCONF(NETDEV_UP): wlxf4ec388b04a9: link is not ready [ 1476.517320] wlxf4ec388b04a9: authenticate with 62:1f:9f:c0:22:88 [ 1476.695980] wlxf4ec388b04a9: send auth to 62:1f:9f:c0:22:88 (try 1/3) [ 1476.698165] wlxf4ec388b04a9: authenticated [ 1476.700156] wlxf4ec388b04a9: associate with 62:1f:9f:c0:22:88 (try 1/3) [ 1476.705486] wlxf4ec388b04a9: RX AssocResp from 62:1f:9f:c0:22:88 (capab=0x401 status=0 aid=2) [ 1476.715476] wlxf4ec388b04a9: associated [ 1476.715551] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4ec388b04a9: link becomes ready [ 2783.570752] systemd[1]: apt-daily.timer: Adding 3h 59min 14.821079s random time. [ 2783.822980] systemd[1]: apt-daily.timer: Adding 3h 16min 8.694680s random time. [ 2784.075402] systemd[1]: apt-daily.timer: Adding 1h 52min 25.266429s random time.