Right, but the bug report is incomprehensible at the moment. And the
device drivers involved here are different. What is happening is that
systems are running at higher than advertised max.

Where is the code for these checks? Can I clone and run them myself to
debug what is happening?

Regards,

Dimitri.

On 20 April 2016 at 14:59, Jeff Lane <email address hidden> wrote:
> Validating the speed is a part of the network testing.  Network tests
> don't run if the link speed is less than advertised max. E.g. if
> someone plugs a 10G card into a 1G network segment, the test will not
> run because it's pointless to test a 10G device at 1/10th the
> supported max speed.
>
> This is not a problem on x86 inside KVM, nor is it a problem on
> PowerKVM, or PowerVM which are similar (admittedly different but
> similar) scenarios.  We have run this successfully in every one of
> those scenarios, s390x should be no different here.  This is not on
> parity with other platforms.
>
>
> On Wed, Apr 20, 2016 at 6:29 AM, Dimitri John Ledkov
> <email address hidden> wrote:
>> One can attempt to do:
>> $ cat /sys/class/net/encc000/device/card_type
>> in some modes it will tell you if the card is real or not, e.g.:
>> "OSD_10GIG"
>> is real card on an lpar.
>>
>> on KVM that file doesn't exist as device is a symlink to "virtio0".
>>
>> on z/VM it has:
>> "Virt.NIC QDIO"
>>
>> Which is well, a fake virtualised card that can be anything.
>>
>> I would recommend to verify link speeds for an interface on s390x if:
>> 1)  /sys/class/net/<interface>/device/card_type exists
>> 2) does not start with Virt
>> 3) does not have "unknown"
>> 4) does not have HiperSockets
>> 5) starts with OS -> which should catch all known physical cards e.g. OSD_100/1000/10GIG/FE_LATE/GbE_NAME/ATM_LANE/Express; OSN; OSM_1000; OSX_10GIG
>>
>> --
>> You received this bug notification because you are subscribed to the bug
>> report.
>> https://bugs.launchpad.net/bugs/1572347
>>
>> Title:
>>   problems with network speed reporting in sysfs on s390
>>
>> Status in linux package in Ubuntu:
>>   Confirmed
>>
>> Bug description:
>>   On an amd64 system with a 1Gb NIC, I can examine
>>   /sys/class/net/<DEVICE> for various bits of data.  In this case, we
>>   need link speed.
>>
>>   For example:
>>
>>   bladernr@galactica:~/Datacenters/Home$ cat /sys/class/net/enp2s0/speed
>>   1000
>>
>>   However, on my z/VM instance of Xenial on s390, the reported speed is WAY below what it actually is:
>>   hwe@hwe-zvm1:/sys/class/net/enc600$ cat speed
>>   10
>>
>>   iperf confirms that this virtual device is actually functioning at 1Gb
>>   speeds.  This is causing failures in the cert networking tests that
>>   probe for reported link speed and then compare that to reported
>>   maximum speed.
>>
>>   On a zKVM instance of Xenial, this is even worse as I am completely
>>   unable to examine /sys/class/net/<DEVICE>/speed at all:
>>
>>   hwe@s1lp9g003:~$ cat /sys/class/net/eth0/speed
>>   cat: /sys/class/net/eth0/speed: Invalid argument
>>   hwe@s1lp9g003:/sys/class/net/eth0$ ll
>>   total 0
>>   drwxr-xr-x 5 root root    0 Apr 19 20:02 ./
>>   drwxr-xr-x 3 root root    0 Apr 19 20:02 ../
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 addr_assign_type
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 addr_len
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 address
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 broadcast
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 carrier
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 carrier_changes
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 dev_id
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 dev_port
>>   lrwxrwxrwx 1 root root    0 Apr 19 20:02 device -> ../../../virtio1/
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 dormant
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 duplex
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 flags
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 gro_flush_timeout
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 ifalias
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 ifindex
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 iflink
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 link_mode
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 mtu
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 name_assign_type
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 netdev_group
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 operstate
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 phys_port_id
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 phys_port_name
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 phys_switch_id
>>   drwxr-xr-x 2 root root    0 Apr 19 20:02 power/
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 proto_down
>>   drwxr-xr-x 4 root root    0 Apr 19 20:02 queues/
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 speed
>>   drwxr-xr-x 2 root root    0 Apr 19 20:02 statistics/
>>   lrwxrwxrwx 1 root root    0 Apr 19 20:02 subsystem -> ../../../../../../../class/net/
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 tx_queue_len
>>   -r--r--r-- 1 root root 4096 Apr 19 20:02 type
>>   -rw-r--r-- 1 root root 4096 Apr 19 20:02 uevent
>>   hwe@s1lp9g003:/sys/class/net/eth0$ sudo cat speed
>>   cat: speed: Invalid argument
>>   hwe@s1lp9g003:/sys/class/net/eth0$ sudo su
>>   root@s1lp9g003:/sys/devices/css0/0.0.0001/0.0.0001/virtio1/net/eth0# cat speed
>>   cat: speed: Invalid argument
>>
>>   So on zKVM even root is not able to view the current link speed.
>>
>>   ProblemType: Bug
>>   DistroRelease: Ubuntu 16.04
>>   Package: linux-image-4.4.0-18-generic 4.4.0-18.34
>>   ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6
>>   Uname: Linux 4.4.0-18-generic s390x
>>   AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access '/dev/snd/': No such file or directory
>>   AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
>>   ApportVersion: 2.20.1-0ubuntu2
>>   Architecture: s390x
>>   ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
>>   CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
>>   Date: Tue Apr 19 22:58:52 2016
>>   HibernationDevice: RESUME=UUID=7ddabd20-1d15-492c-bcd5-ec2dbb16b777
>>   IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
>>   Lspci:
>>
>>   Lsusb: Error: command ['lsusb'] failed with exit code 1:
>>   PciMultimedia:
>>
>>   ProcEnviron:
>>    TERM=xterm
>>    PATH=(custom, no user)
>>    XDG_RUNTIME_DIR=<set>
>>    LANG=en_US.UTF-8
>>    SHELL=/bin/bash
>>   ProcFB: Error: [Errno 2] No such file or directory: '/proc/fb'
>>   ProcKernelCmdLine: root=UUID=b732515f-dacf-4007-85af-a27b5bf48fdf crashkernel=196M BOOT_IMAGE=0
>>   RelatedPackageVersions:
>>    linux-restricted-modules-4.4.0-18-generic N/A
>>    linux-backports-modules-4.4.0-18-generic  N/A
>>    linux-firmware                            1.157
>>   RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
>>   SourcePackage: linux
>>   UpgradeStatus: No upgrade log present (probably fresh install)
>>   ---
>>   AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access '/dev/snd/': No such file or directory
>>   AplayDevices: Error: [Errno 2] No such file or directory
>>   ApportVersion: 2.20.1-0ubuntu2
>>   Architecture: s390x
>>   ArecordDevices: Error: [Errno 2] No such file or directory
>>   CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
>>   DistroRelease: Ubuntu 16.04
>>   HibernationDevice: RESUME=UUID=7ddabd20-1d15-492c-bcd5-ec2dbb16b777
>>   IwConfig: Error: [Errno 2] No such file or directory
>>   Lspci:
>>
>>   Lsusb: Error: command ['lsusb'] failed with exit code 1:
>>   Package: linux (not installed)
>>   PciMultimedia:
>>
>>   ProcEnviron:
>>    TERM=xterm
>>    PATH=(custom, no user)
>>    XDG_RUNTIME_DIR=<set>
>>    LANG=en_US.UTF-8
>>    SHELL=/bin/bash
>>   ProcFB: Error: [Errno 2] No such file or directory: '/proc/fb'
>>   ProcKernelCmdLine: root=UUID=b732515f-dacf-4007-85af-a27b5bf48fdf crashkernel=196M BOOT_IMAGE=0
>>   ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6
>>   RelatedPackageVersions:
>>    linux-restricted-modules-4.4.0-18-generic N/A
>>    linux-backports-modules-4.4.0-18-generic  N/A
>>    linux-firmware                            1.157
>>   RfKill: Error: [Errno 2] No such file or directory
>>   Tags:  xenial
>>   Uname: Linux 4.4.0-18-generic s390x
>>   UpgradeStatus: No upgrade log present (probably fresh install)
>>   UserGroups: adm cdrom cpacfstats dip lpadmin lxd plugdev sambashare sudo
>>   _MarkForUpload: True
>>
>> To manage notifications about this bug go to:
>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1572347/+subscriptions
>>
>> Launchpad-Notification-Type: bug
>> Launchpad-Bug: distribution=ubuntu; sourcepackage=linux; component=main; status=Confirmed; importance=Undecided; assignee=None;
>> Launchpad-Bug-Tags: apport-bug apport-collected s390x xenial
>> Launchpad-Bug-Information-Type: Public
>> Launchpad-Bug-Private: no
>> Launchpad-Bug-Security-Vulnerability: no
>> Launchpad-Bug-Commenters: bladernr brad-figg xnox
>> Launchpad-Bug-Reporter: Jeff Lane (bladernr)
>> Launchpad-Bug-Modifier: Dimitri John Ledkov (xnox)
>> Launchpad-Message-Rationale: Subscriber
>> Launchpad-Message-For: bladernr
>
>
> --
> "Entropy isn't what it used to be."
>
> Jeff Lane -
> Server Certification Lead, Warrior Poet, Biker, Lover of Pie
> Phone: 919-442-8649
> Ubuntu Ham: W4KDH                          Freenode IRC: bladernr or bladernr_
> gpg: 1024D/3A14B2DD 8C88 B076 0DD7 B404 1417  C466 4ABD 3635 3A14 B2DD
>
> --
> You received this bug notification because you are subscribed to Ubuntu.
> Matching subscriptions: s390x
> https://bugs.launchpad.net/bugs/1572347
>
> Title:
>   problems with network speed reporting in sysfs on s390
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1572347/+subscriptions



-- 
Regards,

Dimitri.