[ 27.045833] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.836867] init: plymouth-upstart-bridge main process ended, respawning [ 37.851315] init: plymouth-upstart-bridge main process ended, respawning [ 48.527726] BUG: unable to handle kernel paging request at ffffc90005459200 [ 48.527754] IP: [] memcpy+0xd/0x110 [ 48.527772] PGD 237019067 PUD 23701a067 PMD a972067 PTE 0 [ 48.527792] Oops: 0002 [#1] SMP [ 48.527805] Modules linked in: cuse rfcomm bnep bluetooth binfmt_misc nls_iso8859_1 joydev snd_hda_codec_hdmi snd_hda_codec_realtek eeepc_wmi asus_wmi sparse_keymap ivtv_alsa mxm_wmi tuner_simple tuner_types tuner msp3400 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm saa7115 snd_page_alloc snd_seq_midi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi_event snd_rawmidi kvm snd_seq crct10dif_pclmul crc32_pclmul snd_seq_device snd_timer aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw ivtv tveeprom cx2341x snd v4l2_common i915 mei_me lpc_ich videodev mei video drm_kms_helper shpchp drm mac_hid i2c_algo_bit soundcore wmi parport_pc ppdev lp parport usb_storage hid_generic usbhid hid psmouse ahci r8169 libahci mii [ 48.528068] CPU: 3 PID: 371 Comm: ivtv0 Not tainted 3.13.0-76-generic #120-Ubuntu [ 48.528088] Hardware name: System manufacturer System Product Name/P8Z68-V LX, BIOS 0401 07/15/2011 [ 48.528112] task: ffff8802337b0000 ti: ffff8802337b8000 task.ti: ffff8802337b8000 [ 48.528131] RIP: 0010:[] [] memcpy+0xd/0x110 [ 48.528153] RSP: 0018:ffff8802337b9df8 EFLAGS: 00010246 [ 48.528168] RAX: ffffc90005459200 RBX: 0000000000000004 RCX: 0000000000000240 [ 48.528186] RDX: 0000000000000000 RSI: ffff88022a9e6000 RDI: ffffc90005459200 [ 48.528205] RBP: ffff8802337b9e40 R08: 0000000000000000 R09: ffff88022a9e6000 [ 48.528223] R10: 0000000000000129 R11: 0000000000000138 R12: ffff8800069ce800 [ 48.528242] R13: ffff88023101b200 R14: ffff8802312ec4c0 R15: 0000000000000480 [ 48.528261] FS: 0000000000000000(0000) GS:ffff88023fb80000(0000) knlGS:0000000000000000 [ 48.528282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.528297] CR2: ffffc90005459200 CR3: 000000000dc0e000 CR4: 00000000000407e0 [ 48.528316] Stack: [ 48.528323] ffffffffa02b5975 0000000000000246 ffff8802312ecd80 ffff8802337b9e40 [ 48.528346] ffff8802337c1208 ffff8802337c08f8 ffff8802337c09c8 ffff8802337c0988 [ 48.528369] ffff8802337c09a8 ffff8802337b9e80 ffffffffa0299869 ffff8802312ecd80 [ 48.528392] Call Trace: [ 48.528403] [] ? ivtv_alsa_announce_pcm_data+0x235/0x2b0 [ivtv_alsa] [ 48.528429] [] ivtv_irq_work_handler+0x1c9/0x290 [ivtv] [ 48.528449] [] kthread_worker_fn+0x4d/0x1d0 [ 48.528466] [] ? kthread_stop+0xe0/0xe0 [ 48.528481] [] kthread+0xd2/0xf0 [ 48.528496] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 48.528515] [] ret_from_fork+0x58/0x90 [ 48.528530] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 48.528547] Code: 43 4e 5b 5d c3 66 0f 1f 84 00 00 00 00 00 e8 fb fb ff ff eb e2 90 90 90 90 90 90 90 90 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c [ 48.528676] RIP [] memcpy+0xd/0x110 [ 48.528692] RSP [ 48.528702] CR2: ffffc90005459200 [ 48.532837] ---[ end trace 5fdc005207b2830b ]--- [ 51.571484] audit_printk_skb: 135 callbacks suppressed [ 51.571487] type=1400 audit(1456002138.434:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1978 comm="apparmor_parser" [ 51.571491] type=1400 audit(1456002138.434:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1978 comm="apparmor_parser" [ 51.571775] type=1400 audit(1456002138.434:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1978 comm="apparmor_parser" [ 253.690425] systemd-hostnamed[2965]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 547.235268] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 547.258222] JFS: nTxBlock = 8192, nTxLock = 65536 [ 547.300658] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 547.365946] QNX4 filesystem 0.2.3 registered. [ 547.395856] xor: automatically using best checksumming function: [ 547.435198] avx : 27390.000 MB/sec [ 547.515135] raid6: sse2x1 4367 MB/s [ 547.583060] raid6: sse2x2 5384 MB/s [ 547.651003] raid6: sse2x4 6205 MB/s [ 547.651005] raid6: using algorithm sse2x4 (6205 MB/s) [ 547.651007] raid6: using ssse3x2 recovery algorithm [ 547.698034] bio: create slab at 1 [ 547.698596] Btrfs loaded [ 977.919939] systemd-hostnamed[10990]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 993.030973] usb 2-1.7: USB disconnect, device number 4 [ 1047.752209] PM: Syncing filesystems ... done. [ 1047.946792] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1047.948248] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 1047.948251] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 1047.948257] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 1047.948262] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 1047.948265] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 1047.948268] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 1047.948841] PM: Basic memory bitmaps created [ 1047.948872] PM: Preallocating image memory... done (allocated 1233850 pages) [ 1048.309856] PM: Allocated 4935400 kbytes in 0.36 seconds (13709.44 MB/s) [ 1048.309858] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1048.311185] Suspending console(s) (use no_console_suspend to debug) [ 1048.315031] serial 00:07: disabled [ 1048.315034] serial 00:07: System wakeup disabled by ACPI [ 1048.363797] PM: freeze of devices complete after 52.658 msecs [ 1048.363862] PM: late freeze of devices complete after 0.064 msecs [ 1048.364496] PM: noirq freeze of devices complete after 0.634 msecs [ 1048.364761] ACPI: Preparing to enter system sleep state S4 [ 1048.365397] PM: Saving platform NVS memory [ 1048.365763] Disabling non-boot CPUs ... [ 1048.467630] smpboot: CPU 1 is now offline [ 1048.571549] smpboot: CPU 2 is now offline [ 1048.571905] Broke affinity for irq 23 [ 1048.675456] smpboot: CPU 3 is now offline [ 1048.675787] PM: Creating hibernation image: [ 1048.745239] PM: Need to copy 802582 pages [ 1048.745241] PM: Normal pages needed: 802582 + 1024, available pages: 1271956 [ 1048.676371] PM: Restoring platform NVS memory [ 1048.676775] Enabling non-boot CPUs ... [ 1048.676817] x86: Booting SMP configuration: [ 1048.676818] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1048.690042] CPU1 is up [ 1048.690062] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1048.703338] CPU2 is up [ 1048.703357] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1048.716654] CPU3 is up [ 1048.718865] ACPI: Waking up from system sleep state S4 [ 1048.733132] PM: noirq restore of devices complete after 13.946 msecs [ 1048.733233] PM: early restore of devices complete after 0.072 msecs [ 1048.822324] usb usb1: root hub lost power or was reset [ 1048.822333] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 1048.822444] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 1048.822598] usb usb2: root hub lost power or was reset [ 1048.824352] usb usb3: root hub lost power or was reset [ 1048.824353] usb usb4: root hub lost power or was reset [ 1048.826209] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1048.826485] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1048.827297] serial 00:07: activated [ 1048.828915] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 1048.828917] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 1048.828918] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 1048.828920] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 1048.828922] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 1048.848835] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1048.848835] [drm] This can cause pipe underruns and display issues. [ 1048.848836] [drm] Please upgrade your BIOS to fix this. [ 1048.950675] r8169 0000:07:00.0 eth0: link down [ 1049.144075] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 1049.144082] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1049.148065] ata2.00: configured for UDMA/133 [ 1049.152040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1049.157888] ata3.00: configured for UDMA/33 [ 1049.160025] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1049.161387] ata1.00: configured for UDMA/133 [ 1049.168231] sd 1:0:0:0: [sdb] Starting disk [ 1049.176262] sd 0:0:0:0: [sda] Starting disk [ 1049.387825] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 1049.799461] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 1050.151107] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 1050.439118] PM: restore of devices complete after 1618.377 msecs [ 1050.439237] PM: Image restored successfully. [ 1050.439256] PM: Basic memory bitmaps freed [ 1050.439257] Restarting tasks ... done. [ 1050.450828] video LNXVIDEO:00: Restoring backlight state [ 1050.810978] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 1051.254580] r8169 0000:07:00.0 eth0: link up [ 1102.365960] ivtv0: Encoder has died : ivtv_serialized_open [ 1102.365966] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [ 1103.104765] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 1103.302332] ivtv0: Firmware restart okay [ 1684.044891] init: anacron main process (11384) killed by TERM signal [ 1684.427268] PM: Syncing filesystems ... done. [ 1684.726769] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1684.728313] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 1684.728315] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 1684.728321] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 1684.728327] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 1684.728329] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 1684.728332] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 1684.728904] PM: Basic memory bitmaps created [ 1684.728941] PM: Preallocating image memory... done (allocated 801093 pages) [ 1684.930034] PM: Allocated 3204372 kbytes in 0.20 seconds (16021.86 MB/s) [ 1684.930035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1684.931296] Suspending console(s) (use no_console_suspend to debug) [ 1684.935135] serial 00:07: disabled [ 1684.935138] serial 00:07: System wakeup disabled by ACPI [ 1684.981648] PM: freeze of devices complete after 50.395 msecs [ 1684.981721] PM: late freeze of devices complete after 0.072 msecs [ 1684.982357] PM: noirq freeze of devices complete after 0.635 msecs [ 1684.982621] ACPI: Preparing to enter system sleep state S4 [ 1684.983175] PM: Saving platform NVS memory [ 1684.983566] Disabling non-boot CPUs ... [ 1685.085477] smpboot: CPU 1 is now offline [ 1685.085827] Broke affinity for irq 53 [ 1685.189378] smpboot: CPU 2 is now offline [ 1685.293301] smpboot: CPU 3 is now offline [ 1685.293601] PM: Creating hibernation image: [ 1685.364932] PM: Need to copy 799966 pages [ 1685.364934] PM: Normal pages needed: 799966 + 1024, available pages: 1274574 [ 1685.294185] PM: Restoring platform NVS memory [ 1685.294604] Enabling non-boot CPUs ... [ 1685.294645] x86: Booting SMP configuration: [ 1685.294645] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1685.307847] CPU1 is up [ 1685.307867] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1685.321053] CPU2 is up [ 1685.321073] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1685.334372] CPU3 is up [ 1685.336593] ACPI: Waking up from system sleep state S4 [ 1685.350984] PM: noirq restore of devices complete after 14.073 msecs [ 1685.351085] PM: early restore of devices complete after 0.072 msecs [ 1685.439589] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 1685.439596] usb usb1: root hub lost power or was reset [ 1685.439702] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 1685.439797] usb usb2: root hub lost power or was reset [ 1685.439839] usb usb3: root hub lost power or was reset [ 1685.439840] usb usb4: root hub lost power or was reset [ 1685.443498] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1685.443681] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1685.444352] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 1685.444354] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 1685.444356] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 1685.444358] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 1685.444360] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 1685.444802] serial 00:07: activated [ 1685.466693] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1685.466693] [drm] This can cause pipe underruns and display issues. [ 1685.466693] [drm] Please upgrade your BIOS to fix this. [ 1685.548552] r8169 0000:07:00.0 eth0: link down [ 1685.761930] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1685.761933] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 1685.763442] ata1.00: configured for UDMA/133 [ 1685.777916] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1685.777945] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1685.781198] ata2.00: configured for UDMA/133 [ 1685.783672] ata3.00: configured for UDMA/33 [ 1685.793916] sd 1:0:0:0: [sdb] Starting disk [ 1685.793993] sd 0:0:0:0: [sda] Starting disk [ 1686.005675] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 1686.417314] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 1686.768981] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 1687.056981] PM: restore of devices complete after 1618.990 msecs [ 1687.057095] PM: Image restored successfully. [ 1687.057112] PM: Basic memory bitmaps freed [ 1687.057113] Restarting tasks ... done. [ 1687.060185] video LNXVIDEO:00: Restoring backlight state [ 1687.188945] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 1688.776219] r8169 0000:07:00.0 eth0: link up [ 1844.568429] ivtv0: Encoder has died : ivtv_serialized_open [ 1844.568442] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [ 1845.307235] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 1845.504849] ivtv0: Firmware restart okay [ 5880.964192] PM: Syncing filesystems ... done. [ 5881.095264] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5881.096802] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 5881.096805] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 5881.096811] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 5881.096817] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 5881.096819] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 5881.096822] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 5881.097406] PM: Basic memory bitmaps created [ 5881.097443] PM: Preallocating image memory... done (allocated 1233836 pages) [ 5881.544360] PM: Allocated 4935344 kbytes in 0.44 seconds (11216.69 MB/s) [ 5881.544362] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5881.545700] Suspending console(s) (use no_console_suspend to debug) [ 5881.549618] serial 00:07: disabled [ 5881.549629] serial 00:07: System wakeup disabled by ACPI [ 5881.596813] PM: freeze of devices complete after 51.157 msecs [ 5881.596885] PM: late freeze of devices complete after 0.071 msecs [ 5881.597518] PM: noirq freeze of devices complete after 0.632 msecs [ 5881.597774] ACPI: Preparing to enter system sleep state S4 [ 5881.598327] PM: Saving platform NVS memory [ 5881.598732] Disabling non-boot CPUs ... [ 5881.700636] smpboot: CPU 1 is now offline [ 5881.804536] smpboot: CPU 2 is now offline [ 5881.908439] smpboot: CPU 3 is now offline [ 5881.908738] PM: Creating hibernation image: [ 5881.984219] PM: Need to copy 730543 pages [ 5881.984221] PM: Normal pages needed: 730543 + 1024, available pages: 1344000 [ 5881.909322] PM: Restoring platform NVS memory [ 5881.909730] Enabling non-boot CPUs ... [ 5881.909771] x86: Booting SMP configuration: [ 5881.909772] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5881.922999] CPU1 is up [ 5881.923019] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 5881.936201] CPU2 is up [ 5881.936220] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 5881.949514] CPU3 is up [ 5881.951735] ACPI: Waking up from system sleep state S4 [ 5881.966145] PM: noirq restore of devices complete after 14.093 msecs [ 5881.966247] PM: early restore of devices complete after 0.072 msecs [ 5882.050691] usb usb1: root hub lost power or was reset [ 5882.050701] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 5882.053459] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 5882.053498] usb usb2: root hub lost power or was reset [ 5882.054578] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 5882.054596] usb usb3: root hub lost power or was reset [ 5882.054597] usb usb4: root hub lost power or was reset [ 5882.057384] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5882.058175] serial 00:07: activated [ 5882.059084] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 5882.059086] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 5882.059088] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 5882.059090] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 5882.059092] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 5882.117816] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 5882.117816] [drm] This can cause pipe underruns and display issues. [ 5882.117816] [drm] Please upgrade your BIOS to fix this. [ 5882.159624] r8169 0000:07:00.0 eth0: link down [ 5882.377093] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 5882.385082] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5882.385106] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5882.388966] ata2.00: configured for UDMA/133 [ 5882.390845] ata3.00: configured for UDMA/33 [ 5882.393052] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5882.394444] ata1.00: configured for UDMA/133 [ 5882.401219] sd 1:0:0:0: [sdb] Starting disk [ 5882.409288] sd 0:0:0:0: [sda] Starting disk [ 5882.620828] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 5883.032474] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 5883.252626] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5883.384103] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 5883.672160] PM: restore of devices complete after 1623.053 msecs [ 5883.672273] PM: Image restored successfully. [ 5883.672290] PM: Basic memory bitmaps freed [ 5883.672291] Restarting tasks ... done. [ 5883.683848] video LNXVIDEO:00: Restoring backlight state [ 5884.463818] r8169 0000:07:00.0 eth0: link up [ 5931.067248] ivtv0: Encoder has died : ivtv_serialized_open [ 5931.067252] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [ 5931.806040] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 5932.003612] ivtv0: Firmware restart okay [ 6334.577579] init: anacron main process (13389) killed by TERM signal [ 6334.748701] PM: Syncing filesystems ... done. [ 6334.929644] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6334.931218] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 6334.931221] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 6334.931227] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 6334.931232] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 6334.931235] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 6334.931237] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 6334.931794] PM: Basic memory bitmaps created [ 6334.931832] PM: Preallocating image memory... done (allocated 741186 pages) [ 6335.128460] PM: Allocated 2964744 kbytes in 0.19 seconds (15603.91 MB/s) [ 6335.128462] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6335.129727] Suspending console(s) (use no_console_suspend to debug) [ 6335.133561] serial 00:07: disabled [ 6335.133564] serial 00:07: System wakeup disabled by ACPI [ 6335.188973] PM: freeze of devices complete after 59.299 msecs [ 6335.189046] PM: late freeze of devices complete after 0.071 msecs [ 6335.189681] PM: noirq freeze of devices complete after 0.635 msecs [ 6335.189947] ACPI: Preparing to enter system sleep state S4 [ 6335.190505] PM: Saving platform NVS memory [ 6335.190924] Disabling non-boot CPUs ... [ 6335.294751] smpboot: CPU 1 is now offline [ 6335.398650] smpboot: CPU 2 is now offline [ 6335.502569] smpboot: CPU 3 is now offline [ 6335.502893] PM: Creating hibernation image: [ 6335.578198] PM: Need to copy 739875 pages [ 6335.578201] PM: Normal pages needed: 739875 + 1024, available pages: 1334660 [ 6335.503474] PM: Restoring platform NVS memory [ 6335.503898] Enabling non-boot CPUs ... [ 6335.503939] x86: Booting SMP configuration: [ 6335.503940] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6335.517147] CPU1 is up [ 6335.517166] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6335.530351] CPU2 is up [ 6335.530370] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6335.543570] CPU3 is up [ 6335.545793] ACPI: Waking up from system sleep state S4 [ 6335.560256] PM: noirq restore of devices complete after 14.146 msecs [ 6335.560358] PM: early restore of devices complete after 0.072 msecs [ 6335.644740] usb usb1: root hub lost power or was reset [ 6335.644749] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 6335.644846] usb usb2: root hub lost power or was reset [ 6335.647542] usb usb3: root hub lost power or was reset [ 6335.647543] usb usb4: root hub lost power or was reset [ 6335.648639] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 6335.648727] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 6335.649469] serial 00:07: activated [ 6335.651929] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 6335.652192] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 6335.652202] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 6335.652204] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 6335.652206] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 6335.652208] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 6335.671980] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 6335.671980] [drm] This can cause pipe underruns and display issues. [ 6335.671980] [drm] Please upgrade your BIOS to fix this. [ 6335.761803] r8169 0000:07:00.0 eth0: link down [ 6335.967207] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 6335.979192] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6335.979216] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6335.980749] ata1.00: configured for UDMA/133 [ 6335.982220] ata2.00: configured for UDMA/133 [ 6335.987147] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6335.992840] ata3.00: configured for UDMA/33 [ 6335.999188] sd 1:0:0:0: [sdb] Starting disk [ 6335.999197] sd 0:0:0:0: [sda] Starting disk [ 6336.210951] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 6336.622589] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 6336.814787] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 6336.974234] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 6337.262371] PM: restore of devices complete after 1619.210 msecs [ 6337.262486] PM: Image restored successfully. [ 6337.262503] PM: Basic memory bitmaps freed [ 6337.262504] Restarting tasks ... done. [ 6337.264080] video LNXVIDEO:00: Restoring backlight state [ 6340.123254] r8169 0000:07:00.0 eth0: link up [ 7362.361151] ivtv0: Encoder has died : ivtv_serialized_open [ 7362.361155] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [ 7363.099927] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 7363.297513] ivtv0: Firmware restart okay [ 7647.465886] PM: Syncing filesystems ... done. [ 7647.767045] Freezing user space processes ... (elapsed 0.069 seconds) done. [ 7647.836674] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 7647.836677] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 7647.836682] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 7647.836688] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 7647.836690] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 7647.836693] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 7647.837249] PM: Basic memory bitmaps created [ 7647.837288] PM: Preallocating image memory... done (allocated 804253 pages) [ 7648.040033] PM: Allocated 3217012 kbytes in 0.20 seconds (16085.06 MB/s) [ 7648.040034] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7648.041296] Suspending console(s) (use no_console_suspend to debug) [ 7648.045147] serial 00:07: disabled [ 7648.045151] serial 00:07: System wakeup disabled by ACPI [ 7648.094287] PM: freeze of devices complete after 53.038 msecs [ 7648.094359] PM: late freeze of devices complete after 0.071 msecs [ 7648.094993] PM: noirq freeze of devices complete after 0.633 msecs [ 7648.095254] ACPI: Preparing to enter system sleep state S4 [ 7648.095813] PM: Saving platform NVS memory [ 7648.096249] Disabling non-boot CPUs ... [ 7648.200072] smpboot: CPU 1 is now offline [ 7648.303975] smpboot: CPU 2 is now offline [ 7648.407875] smpboot: CPU 3 is now offline [ 7648.408170] PM: Creating hibernation image: [ 7648.480074] PM: Need to copy 803223 pages [ 7648.480076] PM: Normal pages needed: 803223 + 1024, available pages: 1271306 [ 7648.408753] PM: Restoring platform NVS memory [ 7648.409177] Enabling non-boot CPUs ... [ 7648.409219] x86: Booting SMP configuration: [ 7648.409220] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7648.422417] CPU1 is up [ 7648.422437] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7648.435622] CPU2 is up [ 7648.435642] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7648.448834] CPU3 is up [ 7648.451068] ACPI: Waking up from system sleep state S4 [ 7648.465584] PM: noirq restore of devices complete after 14.199 msecs [ 7648.465686] PM: early restore of devices complete after 0.072 msecs [ 7648.554474] usb usb1: root hub lost power or was reset [ 7648.554476] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 7648.558359] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 7648.558491] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 7648.558526] usb usb2: root hub lost power or was reset [ 7648.558538] usb usb3: root hub lost power or was reset [ 7648.558539] usb usb4: root hub lost power or was reset [ 7648.560327] serial 00:07: activated [ 7648.562417] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 7648.563049] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 7648.563051] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 7648.563053] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 7648.563055] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 7648.563056] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 7648.581279] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 7648.581279] [drm] This can cause pipe underruns and display issues. [ 7648.581280] [drm] Please upgrade your BIOS to fix this. [ 7648.659116] r8169 0000:07:00.0 eth0: link down [ 7648.876529] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7648.876532] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 7648.880632] ata2.00: configured for UDMA/133 [ 7648.884587] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7648.890659] ata3.00: configured for UDMA/33 [ 7648.892489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7648.893857] ata1.00: configured for UDMA/133 [ 7648.900673] sd 1:0:0:0: [sdb] Starting disk [ 7648.912637] sd 0:0:0:0: [sda] Starting disk [ 7649.120270] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 7649.531909] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 7649.604222] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 7649.883578] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 7650.171381] PM: restore of devices complete after 1618.547 msecs [ 7650.171505] PM: Image restored successfully. [ 7650.171522] PM: Basic memory bitmaps freed [ 7650.171523] Restarting tasks ... done. [ 7650.175946] video LNXVIDEO:00: Restoring backlight state [ 7651.116679] r8169 0000:07:00.0 eth0: link up [ 7657.407564] systemd-hostnamed[15070]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 8405.824570] PM: Syncing filesystems ... done. [ 8405.970647] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8405.972012] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 8405.972015] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 8405.972020] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 8405.972026] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 8405.972028] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 8405.972030] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 8405.972572] PM: Basic memory bitmaps created [ 8405.972610] PM: Preallocating image memory... done (allocated 1233916 pages) [ 8406.354926] PM: Allocated 4935664 kbytes in 0.38 seconds (12988.58 MB/s) [ 8406.354928] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8406.356262] Suspending console(s) (use no_console_suspend to debug) [ 8406.360099] serial 00:07: disabled [ 8406.360102] serial 00:07: System wakeup disabled by ACPI [ 8406.417594] PM: freeze of devices complete after 61.387 msecs [ 8406.417666] PM: late freeze of devices complete after 0.071 msecs [ 8406.418300] PM: noirq freeze of devices complete after 0.633 msecs [ 8406.418542] ACPI: Preparing to enter system sleep state S4 [ 8406.419096] PM: Saving platform NVS memory [ 8406.419537] Disabling non-boot CPUs ... [ 8406.523378] smpboot: CPU 1 is now offline [ 8406.627292] smpboot: CPU 2 is now offline [ 8406.731174] smpboot: CPU 3 is now offline [ 8406.731459] PM: Creating hibernation image: [ 8406.804343] PM: Need to copy 779263 pages [ 8406.804346] PM: Normal pages needed: 779263 + 1024, available pages: 1295284 [ 8406.732043] PM: Restoring platform NVS memory [ 8406.732466] Enabling non-boot CPUs ... [ 8406.732508] x86: Booting SMP configuration: [ 8406.732508] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8406.745710] CPU1 is up [ 8406.745730] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8406.758911] CPU2 is up [ 8406.758930] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8406.772229] CPU3 is up [ 8406.774452] ACPI: Waking up from system sleep state S4 [ 8406.788880] PM: noirq restore of devices complete after 14.110 msecs [ 8406.788981] PM: early restore of devices complete after 0.071 msecs [ 8406.875414] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 8406.875488] usb usb1: root hub lost power or was reset [ 8406.875516] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 8406.875566] usb usb2: root hub lost power or was reset [ 8406.876130] usb usb3: root hub lost power or was reset [ 8406.876131] usb usb4: root hub lost power or was reset [ 8406.879376] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 8406.879491] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 8406.880676] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 8406.880678] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 8406.880680] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 8406.880682] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 8406.880684] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 8406.880731] serial 00:07: activated [ 8406.900589] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 8406.900590] [drm] This can cause pipe underruns and display issues. [ 8406.900590] [drm] Please upgrade your BIOS to fix this. [ 8406.990365] r8169 0000:07:00.0 eth0: link down [ 8407.195829] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 8407.203793] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8407.203816] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8407.205339] ata1.00: configured for UDMA/133 [ 8407.207186] ata2.00: configured for UDMA/133 [ 8407.211813] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8407.217923] ata3.00: configured for UDMA/33 [ 8407.219884] sd 0:0:0:0: [sda] Starting disk [ 8407.219888] sd 1:0:0:0: [sdb] Starting disk [ 8407.439573] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 8407.851212] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 8407.903541] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 8408.202880] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 8408.491114] PM: restore of devices complete after 1617.316 msecs [ 8408.491228] PM: Image restored successfully. [ 8408.491246] PM: Basic memory bitmaps freed [ 8408.491247] Restarting tasks ... done. [ 8408.491645] video LNXVIDEO:00: Restoring backlight state [ 8411.420809] r8169 0000:07:00.0 eth0: link up [ 9348.024277] PM: Syncing filesystems ... done. [ 9348.160352] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9348.161951] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 9348.161954] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 9348.161960] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 9348.161965] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [ 9348.161968] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [ 9348.161970] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [ 9348.162558] PM: Basic memory bitmaps created [ 9348.162603] PM: Preallocating image memory... done (allocated 788147 pages) [ 9348.369916] PM: Allocated 3152588 kbytes in 0.20 seconds (15762.94 MB/s) [ 9348.369917] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9348.371180] Suspending console(s) (use no_console_suspend to debug) [ 9348.375059] serial 00:07: disabled [ 9348.375063] serial 00:07: System wakeup disabled by ACPI [ 9348.421964] PM: freeze of devices complete after 50.829 msecs [ 9348.422037] PM: late freeze of devices complete after 0.071 msecs [ 9348.422671] PM: noirq freeze of devices complete after 0.634 msecs [ 9348.422935] ACPI: Preparing to enter system sleep state S4 [ 9348.423489] PM: Saving platform NVS memory [ 9348.423924] Disabling non-boot CPUs ... [ 9348.525793] smpboot: CPU 1 is now offline [ 9348.629692] smpboot: CPU 2 is now offline [ 9348.733613] smpboot: CPU 3 is now offline [ 9348.733930] PM: Creating hibernation image: [ 9348.806413] PM: Need to copy 786905 pages [ 9348.806415] PM: Normal pages needed: 786905 + 1024, available pages: 1287640 [ 9348.734515] PM: Restoring platform NVS memory [ 9348.734941] Enabling non-boot CPUs ... [ 9348.734982] x86: Booting SMP configuration: [ 9348.734983] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9348.748188] CPU1 is up [ 9348.748208] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9348.761388] CPU2 is up [ 9348.761408] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9348.774703] CPU3 is up [ 9348.776921] ACPI: Waking up from system sleep state S4 [ 9348.791306] PM: noirq restore of devices complete after 14.067 msecs [ 9348.791408] PM: early restore of devices complete after 0.072 msecs [ 9348.877044] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [ 9348.877059] usb usb1: root hub lost power or was reset [ 9348.878626] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [ 9348.878668] usb usb2: root hub lost power or was reset [ 9348.880935] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 9348.880952] usb usb3: root hub lost power or was reset [ 9348.880953] usb usb4: root hub lost power or was reset [ 9348.882555] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 9348.883398] serial 00:07: activated [ 9348.885487] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [ 9348.885489] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [ 9348.885491] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [ 9348.885493] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [ 9348.885495] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [ 9348.950965] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 9348.950965] [drm] This can cause pipe underruns and display issues. [ 9348.950965] [drm] Please upgrade your BIOS to fix this. [ 9349.001011] r8169 0000:07:00.0 eth0: link down [ 9349.202251] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 9349.210239] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9349.210262] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9349.211817] ata1.00: configured for UDMA/133 [ 9349.213385] ata2.00: configured for UDMA/133 [ 9349.218211] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9349.223941] ata3.00: configured for UDMA/33 [ 9349.226248] sd 0:0:0:0: [sda] Starting disk [ 9349.226269] sd 1:0:0:0: [sdb] Starting disk [ 9349.445996] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 9349.857632] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [ 9349.993860] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 9350.209277] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [ 9350.497221] PM: restore of devices complete after 1621.788 msecs [ 9350.497353] PM: Image restored successfully. [ 9350.497374] PM: Basic memory bitmaps freed [ 9350.497375] Restarting tasks ... done. [ 9350.509001] video LNXVIDEO:00: Restoring backlight state [ 9353.268519] r8169 0000:07:00.0 eth0: link up [11940.343413] ivtv0: Encoder has died : ivtv_serialized_open [11940.343417] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [11941.082220] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [11941.279846] ivtv0: Firmware restart okay [16743.250384] PM: Syncing filesystems ... done. [16743.409064] Freezing user space processes ... (elapsed 0.001 seconds) done. [16743.410709] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [16743.410712] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [16743.410718] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [16743.410731] PM: Marking nosave pages: [mem 0xbad2f000-0xbadd0fff] [16743.410734] PM: Marking nosave pages: [mem 0xbadd3000-0xbae84fff] [16743.410736] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff] [16743.411294] PM: Basic memory bitmaps created [16743.411334] PM: Preallocating image memory... done (allocated 1233872 pages) [16743.794526] PM: Allocated 4935488 kbytes in 0.38 seconds (12988.12 MB/s) [16743.794527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16743.795857] Suspending console(s) (use no_console_suspend to debug) [16743.799673] serial 00:07: disabled [16743.799676] serial 00:07: System wakeup disabled by ACPI [16743.848436] PM: freeze of devices complete after 52.625 msecs [16743.848509] PM: late freeze of devices complete after 0.072 msecs [16743.849142] PM: noirq freeze of devices complete after 0.633 msecs [16743.849390] ACPI: Preparing to enter system sleep state S4 [16743.849943] PM: Saving platform NVS memory [16743.850407] Disabling non-boot CPUs ... [16743.954218] smpboot: CPU 1 is now offline [16743.954597] Broke affinity for irq 53 [16744.058120] smpboot: CPU 2 is now offline [16744.162022] smpboot: CPU 3 is now offline [16744.162324] PM: Creating hibernation image: [16744.236787] PM: Need to copy 789422 pages [16744.236789] PM: Normal pages needed: 789422 + 1024, available pages: 1285116 [16744.162908] PM: Restoring platform NVS memory [16744.163335] Enabling non-boot CPUs ... [16744.163376] x86: Booting SMP configuration: [16744.163377] smpboot: Booting Node 0 Processor 1 APIC 0x2 [16744.176584] CPU1 is up [16744.176605] smpboot: Booting Node 0 Processor 2 APIC 0x4 [16744.189788] CPU2 is up [16744.189808] smpboot: Booting Node 0 Processor 3 APIC 0x6 [16744.203106] CPU3 is up [16744.205332] ACPI: Waking up from system sleep state S4 [16744.219722] PM: noirq restore of devices complete after 14.073 msecs [16744.219824] PM: early restore of devices complete after 0.072 msecs [16744.308666] usb usb1: root hub lost power or was reset [16744.308672] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X [16744.308783] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X [16744.308820] usb usb2: root hub lost power or was reset [16744.311871] usb usb3: root hub lost power or was reset [16744.311872] usb usb4: root hub lost power or was reset [16744.312560] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [16744.312715] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [16744.313393] serial 00:07: activated [16744.316454] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X [16744.316456] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X [16744.316458] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X [16744.316460] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X [16744.316462] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X [16744.335875] [drm] Wrong MCH_SSKPD value: 0x16040307 [16744.335875] [drm] This can cause pipe underruns and display issues. [16744.335876] [drm] Please upgrade your BIOS to fix this. [16744.425248] r8169 0000:07:00.0 eth0: link down [16744.630668] usb 1-1: reset high-speed USB device number 2 using ehci-pci [16744.638632] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16744.638656] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16744.640164] ata1.00: configured for UDMA/133 [16744.644393] ata3.00: configured for UDMA/33 [16744.646630] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16744.650553] ata2.00: configured for UDMA/133 [16744.654752] sd 0:0:0:0: [sda] Starting disk [16744.662852] sd 1:0:0:0: [sdb] Starting disk [16744.874423] usb 2-1: reset high-speed USB device number 2 using ehci-pci [16745.286053] usb 2-1.8: reset full-speed USB device number 5 using ehci-pci [16745.637721] usb 2-1.6: reset low-speed USB device number 3 using ehci-pci [16745.925487] PM: restore of devices complete after 1618.423 msecs [16745.925600] PM: Image restored successfully. [16745.925629] PM: Basic memory bitmaps freed [16745.925629] Restarting tasks ... done. [16745.927862] video LNXVIDEO:00: Restoring backlight state [16746.057692] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [16746.933494] r8169 0000:07:00.0 eth0: link up [17341.836111] systemd-hostnamed[18632]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [18265.329494] type=1400 audit(1456232936.077:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=19575 comm="apparmor_parser" [18265.329501] type=1400 audit(1456232936.077:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19575 comm="apparmor_parser" [18265.329771] type=1400 audit(1456232936.077:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19575 comm="apparmor_parser" [19230.882570] ivtv0: Encoder has died : ivtv_serialized_open [19230.882576] ivtv0: Detected in ivtv_serialized_open that firmware had failed - Reloading [19231.621294] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [19231.819012] ivtv0: Firmware restart okay [19934.770522] systemd-hostnamed[20104]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [20489.846059] systemd-hostnamed[20328]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [26053.528852] init: upstart-udev-bridge main process (295) terminated with status 1 [26053.528861] init: upstart-udev-bridge main process ended, respawning [26053.528938] init: upstart-socket-bridge main process (516) terminated with status 1 [26053.528944] init: upstart-socket-bridge main process ended, respawning [26053.529005] init: upstart-file-bridge main process (823) terminated with status 1 [26053.529010] init: upstart-file-bridge main process ended, respawning [26055.235718] init: upstart-udev-bridge main process (3716) terminated with status 1 [26055.235747] init: upstart-udev-bridge main process ended, respawning [26055.235847] init: upstart-file-bridge main process (3721) terminated with status 1 [26055.235852] init: upstart-file-bridge main process ended, respawning [26055.235898] init: upstart-socket-bridge main process (3720) terminated with status 1 [26055.235903] init: upstart-socket-bridge main process ended, respawning [26117.081560] init: systemd-logind main process (900) killed by TERM signal [26216.144905] init: smbd main process (737) killed by TERM signal [26359.277122] systemd-udevd[10965]: starting version 204 [26393.521470] init: samba-ad-dc main process (24565) terminated with status 1