[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.5.0-040500rc1-generic (kernel@tangerine) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201601241731 SMP Sun Jan 24 22:33:12 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.5.0-040500rc1-generic root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c4255fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c4256000-0x00000000c4457fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c4458000-0x00000000d33eefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11F800000 mask FFF800000 uncachable [ 0.000000] 8 base 11F600000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE [ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33db4000-0x35ed1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF7B000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00022E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11f5f7000-0x11f5fafff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c4255fff] [ 0.000000] node 0: [mem 0x00000000c4458000-0x00000000d33eefff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff] [ 0.000000] On node 0 totalpages: 992138 [ 0.000000] DMA32 zone: 13495 pages used for memmap [ 0.000000] DMA32 zone: 156 pages reserved [ 0.000000] DMA32 zone: 863626 pages, LIFO batch:31 [ 0.000000] Normal zone: 2008 pages used for memmap [ 0.000000] Normal zone: 128512 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4256000-0xc4457fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011f200000 s97560 r8192 d29416 u262144 [ 0.000000] pcpu-alloc: s97560 r8192 d29416 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 976479 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.5.0-040500rc1-generic root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3782716K/3968552K available (8336K kernel code, 1288K rwdata, 4024K rodata, 1476K init, 1292K bss, 185836K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1496.642 MHz processor [ 0.000054] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.28 BogoMIPS (lpj=5986568) [ 0.000058] pid_max: default: 32768 minimum: 301 [ 0.000067] ACPI: Core revision 20160108 [ 0.010883] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.010920] Security Framework initialized [ 0.010922] Yama: becoming mindful. [ 0.010932] AppArmor: AppArmor initialized [ 0.011386] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012700] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013255] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013263] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013600] CPU: Physical Processor ID: 0 [ 0.013602] CPU: Processor Core ID: 0 [ 0.013609] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013610] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.013614] mce: CPU supports 7 MCE banks [ 0.013630] CPU0: Thermal monitoring enabled (TM1) [ 0.013640] process: using mwait in idle threads [ 0.013645] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.013647] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014273] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000) [ 0.020931] ftrace: allocating 31804 entries in 125 pages [ 0.046054] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.046514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086206] TSC deadline timer enabled [ 0.086211] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.086257] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.086289] ... version: 3 [ 0.086291] ... bit width: 48 [ 0.086293] ... generic registers: 4 [ 0.086294] ... value mask: 0000ffffffffffff [ 0.086296] ... max period: 0000ffffffffffff [ 0.086297] ... fixed-purpose events: 3 [ 0.086299] ... event mask: 000000070000000f [ 0.087463] x86: Booting SMP configuration: [ 0.087466] .... node #0, CPUs: #1 [ 0.090134] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.090264] #2 [ 0.091202] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.093417] #3 [ 0.095892] x86: Booted up 1 node, 4 CPUs [ 0.095896] smpboot: Total of 4 processors activated (11973.13 BogoMIPS) [ 0.100874] devtmpfs: initialized [ 0.104529] evm: security.selinux [ 0.104532] evm: security.SMACK64 [ 0.104533] evm: security.SMACK64EXEC [ 0.104534] evm: security.SMACK64TRANSMUTE [ 0.104536] evm: security.SMACK64MMAP [ 0.104537] evm: security.ima [ 0.104539] evm: security.capability [ 0.104652] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.104791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.104909] pinctrl core: initialized pinctrl subsystem [ 0.105062] RTC time: 13:15:36, date: 01/30/16 [ 0.105224] NET: Registered protocol family 16 [ 0.116649] cpuidle: using governor ladder [ 0.128648] cpuidle: using governor menu [ 0.128661] PCCT header not found. [ 0.128815] ACPI: bus type PCI registered [ 0.128818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.128947] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.128950] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.128959] PCI: Using configuration type 1 for base access [ 0.129282] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.129287] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.129288] mtrr: probably your BIOS does not setup all CPUs. [ 0.129290] mtrr: corrected configuration. [ 0.144855] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.145258] ACPI: Added _OSI(Module Device) [ 0.145261] ACPI: Added _OSI(Processor Device) [ 0.145262] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.145264] ACPI: Added _OSI(Processor Aggregator Device) [ 0.147315] ACPI: Executed 1 blocks of module-level executable AML code [ 0.150445] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.151777] ACPI: Dynamic OEM Table Load: [ 0.151789] ACPI: SSDT 0xFFFF880119F0A000 000784 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.152573] ACPI: Dynamic OEM Table Load: [ 0.152583] ACPI: SSDT 0xFFFF880119F07C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.153267] ACPI: Dynamic OEM Table Load: [ 0.153275] ACPI: SSDT 0xFFFF880119F11A00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.154611] ACPI : EC: EC started [ 0.155522] ACPI: Interpreter enabled [ 0.155556] ACPI: (supports S0 S1 S3 S4 S5) [ 0.155558] ACPI: Using IOAPIC for interrupt routing [ 0.155595] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.164578] ACPI: Power Resource [FN00] (off) [ 0.164722] ACPI: Power Resource [FN01] (off) [ 0.164853] ACPI: Power Resource [FN02] (off) [ 0.164985] ACPI: Power Resource [FN03] (off) [ 0.165115] ACPI: Power Resource [FN04] (off) [ 0.165947] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.165955] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.166140] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID [ 0.166142] _OSC request data: 1 1f 0 [ 0.166148] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.166750] PCI host bridge to bus 0000:00 [ 0.166754] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.166757] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.166760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.166762] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.166765] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.166777] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.166917] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.166931] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.166940] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.166947] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.167117] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.167154] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.167274] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.167340] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.167407] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.167442] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit] [ 0.167562] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.167697] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.167726] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff] [ 0.167866] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.167988] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.168020] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.168158] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.168228] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.168292] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.168425] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.168495] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.168561] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.168691] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.168762] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.168833] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.168864] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff] [ 0.169004] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.169126] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.169392] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.169425] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.169436] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.169451] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.169467] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.169483] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.169498] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff] [ 0.169583] pci 0000:00:1f.2: PME# supported from D3hot [ 0.169698] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.169728] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit] [ 0.169769] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.170036] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000 [ 0.170095] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.170368] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.170437] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.176745] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.176769] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.176946] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.177035] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.177169] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.177252] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.177682] pci 0000:02:00.0: supports D1 D2 [ 0.177685] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177838] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.184790] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.184796] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.184811] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.185825] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.185903] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.185979] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.186053] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.186125] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.186200] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.186273] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.186348] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.186964] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.187028] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.187301] ACPI : EC: 0 stale EC events cleared [ 0.187469] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.187473] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.187476] vgaarb: loaded [ 0.187478] vgaarb: bridge control possible 0000:00:02.0 [ 0.187860] SCSI subsystem initialized [ 0.187926] libata version 3.00 loaded. [ 0.187962] ACPI: bus type USB registered [ 0.187986] usbcore: registered new interface driver usbfs [ 0.187998] usbcore: registered new interface driver hub [ 0.188027] usbcore: registered new device driver usb [ 0.188241] PCI: Using ACPI for IRQ routing [ 0.190189] PCI: pci_cache_line_size set to 64 bytes [ 0.190254] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.190257] e820: reserve RAM buffer [mem 0xc4256000-0xc7ffffff] [ 0.190259] e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff] [ 0.190261] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.190263] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff] [ 0.190428] NetLabel: Initializing [ 0.190430] NetLabel: domain hash size = 128 [ 0.190432] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.190450] NetLabel: unlabeled traffic allowed by default [ 0.190568] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.190576] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.192610] clocksource: Switched to clocksource hpet [ 0.201723] VFS: Disk quotas dquot_6.6.0 [ 0.201754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.201885] AppArmor: AppArmor Filesystem Enabled [ 0.201969] pnp: PnP ACPI init [ 0.202471] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.202476] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.202478] system 00:00: [io 0x5000-0x5003] has been reserved [ 0.202481] system 00:00: [io 0xffff] has been reserved [ 0.202484] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.202487] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.202490] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.202495] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.202498] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.202501] system 00:00: [io 0x5000-0x500f] could not be reserved [ 0.202507] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.202550] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.202626] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.202630] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.202678] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.202741] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.202971] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.202975] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.202977] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.202980] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.202983] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.202986] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.202988] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.202991] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.202994] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.202997] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.203000] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.203004] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203579] pnp: PnP ACPI: found 6 devices [ 0.211086] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.211127] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.211137] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.211151] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.211155] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.211167] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.211179] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.211182] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.211185] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.211187] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.211190] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.211193] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.211195] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.211235] NET: Registered protocol family 2 [ 0.211474] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.211598] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.211704] TCP: Hash tables configured (established 32768 bind 32768) [ 0.211738] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.211764] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.211839] NET: Registered protocol family 1 [ 0.211862] pci 0000:00:02.0: Video device with shadowed ROM [ 0.212006] PCI: CLS 64 bytes, default 64 [ 0.212074] Trying to unpack rootfs image as initramfs... [ 1.086299] Freeing initrd memory: 33912K (ffff880033db4000 - ffff880035ed2000) [ 1.086339] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.086346] software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [ffff8800cf3ef000-ffff8800d33eefff] [ 1.086473] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 1.086475] hw unit of domain pp0-core 2^-16 Joules [ 1.086477] hw unit of domain package 2^-16 Joules [ 1.086478] hw unit of domain pp1-gpu 2^-16 Joules [ 1.086615] Scanning for low memory corruption every 60 seconds [ 1.087186] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.087246] audit: initializing netlink subsys (disabled) [ 1.087269] audit: type=2000 audit(1454159737.072:1): initialized [ 1.087750] Initialise system trusted keyring [ 1.090051] zbud: loaded [ 1.090936] fuse init (API version 7.24) [ 1.091145] Key type big_key registered [ 1.091708] Key type asymmetric registered [ 1.091712] Asymmetric key parser 'x509' registered [ 1.091766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.091810] io scheduler noop registered [ 1.091815] io scheduler deadline registered (default) [ 1.091872] io scheduler cfq registered [ 1.092396] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.092409] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.092451] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.092453] vesafb: scrolling: redraw [ 1.092455] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.092470] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k [ 1.203517] Console: switching to colour frame buffer device 170x48 [ 1.314105] fb0: VESA VGA frame buffer device [ 1.314136] intel_idle: MWAIT substates: 0x21120 [ 1.314138] intel_idle: v0.4 model 0x2A [ 1.314139] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.314752] ACPI: AC Adapter [ADP1] (on-line) [ 1.314881] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.314908] ACPI: Lid Switch [LID0] [ 1.314989] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.314995] ACPI: Power Button [PWRB] [ 1.315075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.315079] ACPI: Power Button [PWRF] [ 1.317286] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.317290] ACPI: Thermal Zone [TZ00] (35 C) [ 1.317650] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.317652] ACPI: Thermal Zone [TZ01] (30 C) [ 1.317718] GHES: HEST is not enabled! [ 1.317914] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.322950] ACPI: Battery Slot [BAT1] (battery present) [ 1.323029] Linux agpgart interface v0.103 [ 1.327314] brd: module loaded [ 1.329109] loop: module loaded [ 1.329425] libphy: Fixed MDIO Bus: probed [ 1.329429] tun: Universal TUN/TAP device driver, 1.6 [ 1.329431] tun: (C) 1999-2004 Max Krasnyansky [ 1.329490] PPP generic driver version 2.4.2 [ 1.329569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.329575] ehci-pci: EHCI PCI platform driver [ 1.329740] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.329749] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.329767] ehci-pci 0000:00:1a.0: debug port 2 [ 1.333666] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.333684] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000 [ 1.344602] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.344665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.344669] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.344671] usb usb1: Product: EHCI Host Controller [ 1.344674] usb usb1: Manufacturer: Linux 4.5.0-040500rc1-generic ehci_hcd [ 1.344676] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.344879] hub 1-0:1.0: USB hub found [ 1.344888] hub 1-0:1.0: 3 ports detected [ 1.345175] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.345183] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.345202] ehci-pci 0000:00:1d.0: debug port 2 [ 1.349109] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.349124] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000 [ 1.360601] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.360655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.360658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.360661] usb usb2: Product: EHCI Host Controller [ 1.360663] usb usb2: Manufacturer: Linux 4.5.0-040500rc1-generic ehci_hcd [ 1.360665] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.360946] hub 2-0:1.0: USB hub found [ 1.360959] hub 2-0:1.0: 3 ports detected [ 1.361126] ehci-platform: EHCI generic platform driver [ 1.361145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.361152] ohci-pci: OHCI PCI platform driver [ 1.361166] ohci-platform: OHCI generic platform driver [ 1.361180] uhci_hcd: USB Universal Host Controller Interface driver [ 1.361359] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.361368] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.362471] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.362480] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.362689] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.362693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.362695] usb usb3: Product: xHCI Host Controller [ 1.362698] usb usb3: Manufacturer: Linux 4.5.0-040500rc1-generic xhci-hcd [ 1.362700] usb usb3: SerialNumber: 0000:00:14.0 [ 1.362976] hub 3-0:1.0: USB hub found [ 1.362993] hub 3-0:1.0: 4 ports detected [ 1.363506] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.363512] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.363558] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.363561] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.363563] usb usb4: Product: xHCI Host Controller [ 1.363566] usb usb4: Manufacturer: Linux 4.5.0-040500rc1-generic xhci-hcd [ 1.363568] usb usb4: SerialNumber: 0000:00:14.0 [ 1.363762] hub 4-0:1.0: USB hub found [ 1.363774] hub 4-0:1.0: 4 ports detected [ 1.364335] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 1.370349] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.370356] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.370712] mousedev: PS/2 mouse device common for all mice [ 1.371383] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.371417] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.371430] i2c /dev entries driver [ 1.371509] device-mapper: uevent: version 1.0.3 [ 1.371603] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.371630] Intel P-state driver initializing. [ 1.371890] ledtrig-cpu: registered to indicate activity on CPUs [ 1.372834] NET: Registered protocol family 10 [ 1.373384] NET: Registered protocol family 17 [ 1.373420] Key type dns_resolver registered [ 1.374003] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29 [ 1.374027] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29 [ 1.374042] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29 [ 1.374064] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29 [ 1.374165] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.374563] registered taskstats version 1 [ 1.374600] Loading compiled-in X.509 certificates [ 1.377123] Loaded X.509 cert 'Build time autogenerated kernel key: 46bac7ab0712f4b379b88604be16f917baae057c' [ 1.377153] zswap: loaded using pool lzo/zbud [ 1.377724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.380565] Key type trusted registered [ 1.386701] Key type encrypted registered [ 1.386715] AppArmor: AppArmor sha1 policy hashing enabled [ 1.386722] ima: No TPM chip found, activating TPM-bypass! [ 1.386760] evm: HMAC attrs: 0x1 [ 1.387173] Magic number: 0:322:282 [ 1.387212] tty tty19: hash matches [ 1.387299] rtc_cmos 00:01: setting system clock to 2016-01-30 13:15:37 UTC (1454159737) [ 1.387397] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.387398] EDD information not available. [ 1.387533] PM: Hibernation image not present or could not be loaded. [ 1.389671] Freeing unused kernel memory: 1476K (ffffffff81f44000 - ffffffff820b5000) [ 1.389674] Write protecting the kernel read-only data: 14336k [ 1.390474] Freeing unused kernel memory: 1892K (ffff880001827000 - ffff880001a00000) [ 1.390787] Freeing unused kernel memory: 72K (ffff880001dee000 - ffff880001e00000) [ 1.407916] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.452705] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.457101] wmi: Mapper loaded [ 1.481283] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.481300] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.481722] ahci 0000:00:1f.2: version 3.0 [ 1.482012] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 1.482020] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.482093] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000662000, e8:03:9a:0f:c4:4f, XID 0c900800 IRQ 25 [ 1.482099] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.486184] [drm] Initialized drm 1.1.0 20060810 [ 1.490975] scsi host0: ahci [ 1.491198] scsi host1: ahci [ 1.491904] scsi host2: ahci [ 1.492115] scsi host3: ahci [ 1.492605] scsi host4: ahci [ 1.492805] scsi host5: ahci [ 1.492926] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 26 [ 1.492933] ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 26 [ 1.492936] ata3: DUMMY [ 1.492939] ata4: DUMMY [ 1.492942] ata5: DUMMY [ 1.492944] ata6: DUMMY [ 1.535844] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.543297] [drm] Memory usable by graphics device = 2048M [ 1.543304] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.543306] fb: switching to inteldrmfb from VESA VGA [ 1.543340] Console: switching to colour dummy device 80x25 [ 1.543439] [drm] Replacing VGA console driver [ 1.548913] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.548917] [drm] Driver supports precise vblank timestamp query. [ 1.550153] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.561601] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.562087] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.562246] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0 [ 1.656683] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.672683] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 1.672703] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.696848] fbcon: inteldrmfb (fb0) is primary device [ 1.789201] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.789204] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.789691] hub 1-1:1.0: USB hub found [ 1.789874] hub 1-1:1.0: 6 ports detected [ 1.804399] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.804425] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.805083] ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133 [ 1.805085] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.805277] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.805279] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.805431] ata2.00: configured for UDMA/133 [ 1.805464] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 1.805466] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.805695] hub 2-1:1.0: USB hub found [ 1.805938] hub 2-1:1.0: 6 ports detected [ 1.836522] ata1.00: configured for UDMA/133 [ 1.836835] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5 [ 1.861656] usb 3-1: New USB device found, idVendor=0e8f, idProduct=00fb [ 1.861659] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.861660] usb 3-1: Product: USB Mouse [ 1.861662] usb 3-1: Manufacturer: YSTEK [ 1.867911] hidraw: raw HID events driver (C) Jiri Kosina [ 1.868819] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.868823] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.868873] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.868888] sd 0:0:0:0: [sda] Write Protect is off [ 1.868893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.868921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.869163] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 0.04 PQ: 0 ANSI: 5 [ 1.873799] usbcore: registered new interface driver usbhid [ 1.873800] usbhid: USB HID core driver [ 1.876466] input: YSTEK USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0E8F:00FB.0001/input/input7 [ 1.876707] hid-generic 0003:0E8F:00FB.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK USB Mouse] on usb-0000:00:14.0-1/input0 [ 1.892911] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB) [ 1.892946] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.893042] sd 1:0:0:0: [sdb] Write Protect is off [ 1.893046] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.893090] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.893805] sdb: sdb1 [ 1.894237] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.964650] sda: sda2 sda4 < sda5 sda6 sda7 sda8 > [ 1.965469] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.060593] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 2.076632] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.084651] tsc: Refined TSC clocksource calibration: 1496.602 MHz [ 2.084654] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159298a4d16, max_idle_ns: 440795254665 ns [ 2.173819] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da [ 2.173821] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.274089] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035 [ 2.274091] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.274093] usb 1-1.4: Product: WebCam SC-13HDL12131N [ 2.274095] usb 1-1.4: Manufacturer: Generic [ 2.274096] usb 1-1.4: SerialNumber: 200901010001 [ 2.369138] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 2.383950] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 2.398701] psmouse serio1: elantech: Elan sample query result 03, 3f, 86 [ 2.473765] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 2.495372] Console: switching to colour frame buffer device 170x48 [ 2.624764] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.084862] clocksource: Switched to clocksource tsc [ 4.164515] raid6: sse2x1 gen() 3998 MB/s [ 4.232513] raid6: sse2x1 xor() 3127 MB/s [ 4.300504] raid6: sse2x2 gen() 5002 MB/s [ 4.368502] raid6: sse2x2 xor() 3595 MB/s [ 4.436505] raid6: sse2x4 gen() 5760 MB/s [ 4.504504] raid6: sse2x4 xor() 4329 MB/s [ 4.504506] raid6: using algorithm sse2x4 gen() 5760 MB/s [ 4.504508] raid6: .... xor() 4329 MB/s, rmw enabled [ 4.504510] raid6: using ssse3x2 recovery algorithm [ 4.506564] xor: automatically using best checksumming function: [ 4.544494] avx : 11053.000 MB/sec [ 4.570341] Btrfs loaded [ 4.903609] random: nonblocking pool is initialized [ 5.250878] BTRFS: device fsid 4f4435ca-b877-47a5-9065-3dd624c0514e devid 1 transid 66608 /dev/sdb1 [ 5.283157] BTRFS info (device sdb1): disk space caching is enabled [ 5.283162] BTRFS: has skinny extents [ 5.306106] BTRFS: detected SSD devices, enabling SSD mode [ 5.434947] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time. [ 5.467237] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 5.474760] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.475060] systemd[1]: Detected architecture x86-64. [ 5.475841] systemd[1]: Set hostname to . [ 5.682863] systemd[1]: Created slice User and Session Slice. [ 5.682974] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.682993] systemd[1]: Reached target User and Group Name Lookups. [ 5.683050] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.683099] systemd[1]: Listening on udev Control Socket. [ 5.683214] systemd[1]: Listening on Journal Audit Socket. [ 5.683282] systemd[1]: Listening on Journal Socket. [ 5.683328] systemd[1]: Listening on udev Kernel Socket. [ 5.683372] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.683555] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.683575] systemd[1]: Reached target Encrypted Volumes. [ 5.683616] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.683661] systemd[1]: Listening on Syslog Socket. [ 5.683824] systemd[1]: Created slice System Slice. [ 5.700715] systemd[1]: Mounting POSIX Message Queue File System... [ 5.701561] systemd[1]: Starting Braille Device Support... [ 5.702295] systemd[1]: Mounting Debug File System... [ 5.706914] systemd[1]: Starting Load Kernel Modules... [ 5.707243] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.708494] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.711334] systemd[1]: Mounting Huge Pages File System... [ 5.712370] systemd[1]: Starting Journal Service... [ 5.712601] systemd[1]: Created slice system-getty.slice. [ 5.712642] systemd[1]: Reached target Slices. [ 5.713440] systemd[1]: Starting Uncomplicated firewall... [ 5.715528] systemd[1]: Started Read required files in advance. [ 5.715905] systemd[1]: Reached target Remote File Systems (Pre). [ 5.715951] systemd[1]: Reached target Remote File Systems. [ 5.722041] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.741710] systemd[1]: Started Uncomplicated firewall. [ 5.753910] systemd[1]: Mounted Huge Pages File System. [ 5.754037] systemd[1]: Mounted POSIX Message Queue File System. [ 5.754123] systemd[1]: Mounted Debug File System. [ 5.767580] lp: driver loaded but no devices found [ 5.774006] ppdev: user-space parallel port driver [ 5.800726] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.806021] systemd[1]: Started Braille Device Support. [ 5.806372] systemd[1]: Started Load Kernel Modules. [ 5.806552] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 5.807017] systemd[1]: ureadahead.service: Unit entered failed state. [ 5.807057] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 5.808790] systemd[1]: Started Journal Service. [ 5.954887] BTRFS info (device sdb1): disk space caching is enabled [ 5.981633] systemd-journald[283]: Received request to flush runtime journal from PID 1 [ 6.157112] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.184868] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255) [ 6.184882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.184890] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 6.184899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.184902] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 6.184910] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.184913] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255) [ 6.184920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.184922] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.224241] Intel(R) Wireless WiFi driver for Linux [ 6.224247] Copyright(c) 2003- 2015 Intel Corporation [ 6.224415] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.231968] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 6.286933] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 6.286941] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 6.286946] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 6.286951] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 6.288193] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 6.291094] media: Linux media interface: v0.10 [ 6.309013] Linux video capture interface: v2.00 [ 6.338253] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.373054] Bluetooth: Core ver 2.21 [ 6.373080] NET: Registered protocol family 31 [ 6.373083] Bluetooth: HCI device and connection manager initialized [ 6.373090] Bluetooth: HCI socket layer initialized [ 6.373096] Bluetooth: L2CAP socket layer initialized [ 6.373107] Bluetooth: SCO socket layer initialized [ 6.415324] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.415333] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.415338] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 6.415342] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.415345] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.415351] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 6.415355] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 6.419040] samsung_laptop: detected SABI interface: SwSmi@ [ 6.436737] usbcore: registered new interface driver btusb [ 6.439227] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035) [ 6.444858] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.452712] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 6.452722] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized! [ 6.452728] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 6.453396] input: WebCam SC-13HDL12131N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 6.455578] usbcore: registered new interface driver uvcvideo [ 6.455583] USB Video Class driver (1.1.1) [ 6.463256] intel_rapl: Found RAPL domain package [ 6.463263] intel_rapl: Found RAPL domain core [ 6.463267] intel_rapl: Found RAPL domain uncore [ 6.463276] intel_rapl: RAPL package 0 domain package locked by BIOS [ 6.465135] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 6.465269] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.465366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.522479] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 6.539691] cfg80211: World regulatory domain updated: [ 6.539698] cfg80211: DFS Master region: unset [ 6.539701] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.539708] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.539712] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.539716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.539721] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6.539727] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.539732] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.539736] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.539740] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7.515152] Adding 3999740k swap on /dev/sda5. Priority:-1 extents:1 across:3999740k FS [ 9.008416] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 10.224185] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 10.385865] audit: type=1400 audit(1454170546.495:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=636 comm="apparmor_parser" [ 10.385883] audit: type=1400 audit(1454170546.495:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser" [ 10.385894] audit: type=1400 audit(1454170546.495:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=636 comm="apparmor_parser" [ 10.385904] audit: type=1400 audit(1454170546.495:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser" [ 10.389887] audit: type=1400 audit(1454170546.499:6): apparmor="STATUS" operation="profile_load" name="system_tor" pid=636 comm="apparmor_parser" [ 10.411835] audit: type=1400 audit(1454170546.519:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=636 comm="apparmor_parser" [ 10.411846] audit: type=1400 audit(1454170546.519:8): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=636 comm="apparmor_parser" [ 10.411854] audit: type=1400 audit(1454170546.519:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=636 comm="apparmor_parser" [ 10.411860] audit: type=1400 audit(1454170546.519:10): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=636 comm="apparmor_parser" [ 10.411866] audit: type=1400 audit(1454170546.519:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=636 comm="apparmor_parser" [ 10.676999] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.677006] Bluetooth: BNEP filters: protocol multicast [ 10.677014] Bluetooth: BNEP socket layer initialized [ 11.077003] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 11.077130] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.083825] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.083922] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 11.357522] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.364197] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.364289] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 11.441163] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 11.445834] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 11.570435] r8169 0000:02:00.0 enp2s0: link down [ 11.570557] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 11.699102] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 14.864638] wlp1s0: authenticate with 30:b5:c2:dd:d7:f8 [ 14.867810] wlp1s0: send auth to 30:b5:c2:dd:d7:f8 (try 1/3) [ 14.869995] wlp1s0: authenticated [ 14.870164] wlp1s0: waiting for beacon from 30:b5:c2:dd:d7:f8 [ 14.952280] wlp1s0: associate with 30:b5:c2:dd:d7:f8 (try 1/3) [ 14.956410] wlp1s0: RX AssocResp from 30:b5:c2:dd:d7:f8 (capab=0x431 status=0 aid=5) [ 14.965026] wlp1s0: associated [ 14.965077] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 14.969202] cfg80211: Regulatory domain changed to country: US [ 14.969206] cfg80211: DFS Master region: FCC [ 14.969209] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.969213] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 14.969216] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 14.969219] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 14.969222] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 14.969224] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 14.969227] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 20.425486] Bluetooth: RFCOMM TTY layer initialized [ 20.425499] Bluetooth: RFCOMM socket layer initialized [ 20.425507] Bluetooth: RFCOMM ver 1.11 [ 149.173359] wlp1s0: deauthenticating from 30:b5:c2:dd:d7:f8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 149.206327] cfg80211: World regulatory domain updated: [ 149.206333] cfg80211: DFS Master region: unset [ 149.206337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 149.206343] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 149.206347] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 149.206352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 149.206358] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 149.206363] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 149.206368] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 149.206372] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 149.206376] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 150.285064] PM: Syncing filesystems ... done. [ 150.558250] PM: Preparing system for sleep (mem) [ 150.558801] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 150.560772] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 150.562043] PM: Suspending system (mem) [ 150.562062] Suspending console(s) (use no_console_suspend to debug) [ 150.562411] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 150.562450] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 150.562604] sd 1:0:0:0: [sdb] Stopping disk [ 150.664336] sd 0:0:0:0: [sda] Stopping disk [ 151.268861] PM: suspend of devices complete after 706.638 msecs [ 151.284823] PM: late suspend of devices complete after 15.940 msecs [ 151.285802] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 151.286100] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 151.300819] PM: noirq suspend of devices complete after 15.990 msecs [ 151.301348] ACPI: Preparing to enter system sleep state S3 [ 151.324774] ACPI : EC: EC stopped [ 151.324775] PM: Saving platform NVS memory [ 151.324780] Disabling non-boot CPUs ... [ 151.325176] Broke affinity for irq 16 [ 151.325182] Broke affinity for irq 23 [ 151.325190] Broke affinity for irq 27 [ 151.326226] smpboot: CPU 1 is now offline [ 151.337493] Broke affinity for irq 16 [ 151.337499] Broke affinity for irq 23 [ 151.337506] Broke affinity for irq 27 [ 151.337509] Broke affinity for irq 29 [ 151.338551] smpboot: CPU 2 is now offline [ 151.353258] Broke affinity for irq 1 [ 151.353266] Broke affinity for irq 9 [ 151.353270] Broke affinity for irq 12 [ 151.353275] Broke affinity for irq 16 [ 151.353280] Broke affinity for irq 23 [ 151.353282] Broke affinity for irq 24 [ 151.353284] Broke affinity for irq 26 [ 151.353286] Broke affinity for irq 27 [ 151.353287] Broke affinity for irq 29 [ 151.354316] smpboot: CPU 3 is now offline [ 151.370557] ACPI: Low-level resume complete [ 151.370607] ACPI : EC: EC started [ 151.370608] PM: Restoring platform NVS memory [ 151.371811] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 151.371859] Enabling non-boot CPUs ... [ 151.390833] x86: Booting SMP configuration: [ 151.390835] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 151.394008] cache: parent cpu1 should not be sleeping [ 151.394229] CPU1 is up [ 151.410959] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 151.412185] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 151.414790] cache: parent cpu2 should not be sleeping [ 151.415016] CPU2 is up [ 151.435049] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 151.438479] cache: parent cpu3 should not be sleeping [ 151.438696] CPU3 is up [ 151.446474] ACPI : EC: 0 stale EC events cleared [ 151.446481] ACPI: Waking up from system sleep state S3 [ 151.510846] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 151.511306] PM: noirq resume of devices complete after 16.575 msecs [ 151.512149] PM: early resume of devices complete after 0.805 msecs [ 151.512495] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 151.523265] rtc_cmos 00:01: System wakeup disabled by ACPI [ 151.523304] sd 0:0:0:0: [sda] Starting disk [ 151.523333] sd 1:0:0:0: [sdb] Starting disk [ 151.571899] xhci_hcd 0000:00:14.0: port 0 resume PLC timeout [ 151.640830] r8169 0000:02:00.0 enp2s0: link down [ 151.742498] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci [ 151.754538] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 151.841366] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 151.843770] ata2.00: configured for UDMA/133 [ 151.946725] usb 3-1: reset low-speed USB device number 2 using xhci_hcd [ 152.228328] PM: resume of devices complete after 716.191 msecs [ 152.228383] usb 2-1.5:1.0: rebind failed: -517 [ 152.228387] usb 2-1.5:1.1: rebind failed: -517 [ 152.228787] PM: Finishing wakeup. [ 152.228791] Restarting tasks ... done. [ 152.301040] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 152.301199] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 152.307886] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 152.307978] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 152.579788] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 152.586505] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 152.586618] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 152.668776] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 152.670942] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 152.768546] r8169 0000:02:00.0 enp2s0: link down [ 152.768619] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 152.819616] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 154.194403] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 154.196438] ata1.00: configured for UDMA/133 [ 233.373626] PM: Syncing filesystems ... done. [ 233.696992] PM: Preparing system for sleep (mem) [ 233.697414] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 233.699717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 233.701175] PM: Suspending system (mem) [ 233.701210] Suspending console(s) (use no_console_suspend to debug) [ 233.702290] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 233.702317] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 233.702425] sd 1:0:0:0: [sdb] Stopping disk [ 233.787622] sd 0:0:0:0: [sda] Stopping disk [ 234.420436] PM: suspend of devices complete after 718.922 msecs [ 234.436487] PM: late suspend of devices complete after 16.035 msecs [ 234.437442] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 234.437836] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 234.452461] PM: noirq suspend of devices complete after 15.967 msecs [ 234.452914] ACPI: Preparing to enter system sleep state S3 [ 234.476504] ACPI : EC: EC stopped [ 234.476505] PM: Saving platform NVS memory [ 234.476513] Disabling non-boot CPUs ... [ 234.477053] Broke affinity for irq 16 [ 234.477059] Broke affinity for irq 23 [ 234.477067] Broke affinity for irq 27 [ 234.478113] smpboot: CPU 1 is now offline [ 234.489668] Broke affinity for irq 16 [ 234.489674] Broke affinity for irq 23 [ 234.489682] Broke affinity for irq 27 [ 234.489684] Broke affinity for irq 29 [ 234.490728] smpboot: CPU 2 is now offline [ 234.501103] Broke affinity for irq 1 [ 234.501114] Broke affinity for irq 9 [ 234.501120] Broke affinity for irq 12 [ 234.501126] Broke affinity for irq 16 [ 234.501132] Broke affinity for irq 23 [ 234.501136] Broke affinity for irq 24 [ 234.501140] Broke affinity for irq 26 [ 234.501142] Broke affinity for irq 27 [ 234.501145] Broke affinity for irq 29 [ 234.502199] smpboot: CPU 3 is now offline [ 234.518914] ACPI: Low-level resume complete [ 234.518965] ACPI : EC: EC started [ 234.518966] PM: Restoring platform NVS memory [ 234.520195] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 234.520229] Enabling non-boot CPUs ... [ 234.538671] x86: Booting SMP configuration: [ 234.538672] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 234.541476] cache: parent cpu1 should not be sleeping [ 234.541695] CPU1 is up [ 234.558927] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 234.560152] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 234.562731] cache: parent cpu2 should not be sleeping [ 234.562951] CPU2 is up [ 234.583014] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 234.586435] cache: parent cpu3 should not be sleeping [ 234.586655] CPU3 is up [ 234.594433] ACPI : EC: 0 stale EC events cleared [ 234.594441] ACPI: Waking up from system sleep state S3 [ 234.658688] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 234.659230] PM: noirq resume of devices complete after 16.489 msecs [ 234.659987] PM: early resume of devices complete after 0.714 msecs [ 234.660611] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 234.661060] sd 0:0:0:0: [sda] Starting disk [ 234.661080] sd 1:0:0:0: [sdb] Starting disk [ 234.661572] rtc_cmos 00:01: System wakeup disabled by ACPI [ 234.772809] r8169 0000:02:00.0 enp2s0: link down [ 234.890493] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 234.890497] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci [ 234.966674] usb 3-1: reset low-speed USB device number 2 using xhci_hcd [ 234.977484] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 234.979960] ata2.00: configured for UDMA/133 [ 235.248162] PM: resume of devices complete after 588.183 msecs [ 235.248226] usb 2-1.5:1.0: rebind failed: -517 [ 235.248232] usb 2-1.5:1.1: rebind failed: -517 [ 235.248702] PM: Finishing wakeup. [ 235.248705] Restarting tasks ... done. [ 235.328746] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 235.329472] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 235.336156] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 235.336251] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 235.608274] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 235.614967] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 235.615062] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 235.696527] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 235.699135] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 235.796535] r8169 0000:02:00.0 enp2s0: link down [ 235.796608] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 235.848850] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 236.942396] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 236.944864] ata1.00: configured for UDMA/133