[ 0.000000] Linux version 2.6.24-1-generic (buildd@rothera) (gcc version 4.2.3 20071123 (prerelease) (Ubuntu 4.2.2-3ubuntu4)) #1 SMP Thu Nov 29 19:24:45 GMT 2007 (Ubuntu 2.6.24-1.1-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393200 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393200 [ 0.000000] On node 0 totalpages: 393200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1279 pages used for memmap [ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6BA0 checksum 0 [ 0.000000] ACPI: RSDP 000F6BA0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 5FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 5FFF30C0, 48E8 (r1 NVIDIA AWRDACPI 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 5FFF0000, 0040 [ 0.000000] ACPI: APIC 5FFF79C0, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390129 [ 0.000000] Kernel command line: root=UUID=5a66dbe3-2951-4f0f-a20a-e930883df6dc ro quiet splash locale=nb_NO [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1830.014 MHz processor. [ 28.951481] Console: colour VGA+ 80x25 [ 28.951484] console [tty0] enabled [ 28.952049] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 28.952553] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.018755] Memory: 1547772k/1572800k available (2092k kernel code, 23732k reserved, 975k data, 364k init, 655296k highmem) [ 29.018764] virtual kernel memory layout: [ 29.018766] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 29.018767] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 29.018768] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 29.018769] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 29.018771] .init : 0xc0405000 - 0xc0460000 ( 364 kB) [ 29.018772] .data : 0xc030b10d - 0xc03fed64 ( 975 kB) [ 29.018773] .text : 0xc0100000 - 0xc030b10d (2092 kB) [ 29.018776] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.018828] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 29.098773] Calibrating delay using timer specific routine.. 3663.03 BogoMIPS (lpj=7326065) [ 29.098809] Security Framework initialized [ 29.098817] SELinux: Disabled at boot. [ 29.098822] Capability LSM initialized [ 29.098841] Mount-cache hash table entries: 512 [ 29.098996] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 29.099006] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.099009] CPU: L2 Cache: 512K (64 bytes/line) [ 29.099012] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 29.099024] Compat vDSO mapped to ffffe000. [ 29.099038] Checking 'hlt' instruction... OK. [ 29.115001] SMP alternatives: switching to UP code [ 29.116156] Freeing SMP alternatives: 11k freed [ 29.116292] Early unpacking initramfs... done [ 29.433140] ACPI: Core revision 20070126 [ 29.433230] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 29.454074] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 29.454100] Total of 1 processors activated (3663.03 BogoMIPS). [ 29.454296] ENABLING IO-APIC IRQs [ 29.454502] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 29.598360] Brought up 1 CPUs [ 29.598389] CPU0 attaching sched-domain: [ 29.598392] domain 0: span 01 [ 29.598394] groups: 01 [ 29.598596] net_namespace: 64 bytes [ 29.598603] Booting paravirtualized kernel on bare hardware [ 29.599099] Time: 21:20:02 Date: 12/04/07 [ 29.599162] NET: Registered protocol family 16 [ 29.599376] EISA bus registered [ 29.599397] ACPI: bus type pci registered [ 29.600000] PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2 [ 29.600003] PCI: Using configuration type 1 [ 29.600004] Setting up standard PCI resources [ 29.605966] ACPI: EC: Look up EC in DSDT [ 29.612294] ACPI: Interpreter enabled [ 29.612297] ACPI: (supports S0 S3 S4 S5) [ 29.612312] ACPI: Using IOAPIC for interrupt routing [ 29.621272] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.621351] PCI: nForce2 C1 Halt Disconnect fixup [ 29.622502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.622687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 29.622943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 29.671856] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 29.672030] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 29.672201] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.672376] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.672545] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.672716] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 29.672886] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 29.673056] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 29.673229] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.673399] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.673569] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.673739] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.673909] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.674082] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 29.674261] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.674436] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.674583] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 29.674715] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 29.674846] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 29.674977] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 29.675108] ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled. [ 29.675298] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 29.675489] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 29.675677] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 29.675865] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 29.676054] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 29.676242] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 29.676375] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 29.676562] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 29.676749] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 29.676937] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 29.677125] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 29.677272] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.677308] pnp: PnP ACPI init [ 29.677316] ACPI: bus type pnp registered [ 29.681993] pnp: PnP ACPI: found 13 devices [ 29.681996] ACPI: ACPI bus type pnp unregistered [ 29.682000] PnPBIOS: Disabled by ACPI PNP [ 29.682268] PCI: Using ACPI for IRQ routing [ 29.682273] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.746182] NET: Registered protocol family 8 [ 29.746185] NET: Registered protocol family 20 [ 29.750170] Time: tsc clocksource has been installed. [ 29.758202] system 00:00: ioport range 0x4000-0x407f has been reserved [ 29.758205] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 29.758208] system 00:00: ioport range 0x4400-0x447f has been reserved [ 29.758211] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 29.758214] system 00:00: ioport range 0x4200-0x427f has been reserved [ 29.758219] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 29.758225] system 00:01: ioport range 0x5000-0x503f has been reserved [ 29.758228] system 00:01: ioport range 0x5100-0x513f has been reserved [ 29.758234] system 00:02: iomem range 0xd8800-0xdbfff has been reserved [ 29.758237] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 29.758240] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 29.758243] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 29.788690] PCI: Bridge: 0000:00:08.0 [ 29.788693] IO window: 9000-afff [ 29.788698] MEM window: ea000000-ebffffff [ 29.788702] PREFETCH window: disabled. [ 29.788707] PCI: Bridge: 0000:00:1e.0 [ 29.788709] IO window: b000-bfff [ 29.788713] MEM window: e8000000-e9ffffff [ 29.788716] PREFETCH window: d8000000-e7ffffff [ 29.788727] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 29.788743] NET: Registered protocol family 2 [ 29.826197] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 29.826580] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.827957] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 29.828637] TCP: Hash tables configured (established 131072 bind 65536) [ 29.828640] TCP reno registered [ 29.838247] checking if image is initramfs... it is [ 30.289666] Switched to high resolution mode on CPU 0 [ 30.440748] Freeing initrd memory: 6608k freed [ 30.441465] audit: initializing netlink socket (disabled) [ 30.441481] audit(1196803202.308:1): initialized [ 30.441666] highmem bounce pool size: 64 pages [ 30.443642] VFS: Disk quotas dquot_6.5.1 [ 30.443725] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 30.443874] io scheduler noop registered [ 30.443877] io scheduler anticipatory registered [ 30.443879] io scheduler deadline registered [ 30.443891] io scheduler cfq registered (default) [ 30.497400] Boot video device is 0000:02:00.0 [ 30.497634] isapnp: Scanning for PnP cards... [ 30.851788] isapnp: No Plug & Play device found [ 30.876346] Real Time Clock Driver v1.12ac [ 30.876462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.876602] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.876750] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.877698] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.877912] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.878722] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.878796] input: Macintosh mouse button emulation as /class/input/input0 [ 30.878949] PNP: No PS/2 controller found. Probing ports directly. [ 30.881337] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.881342] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.889070] mice: PS/2 mouse device common for all mice [ 30.889198] EISA: Probing bus 0 at eisa.0 [ 30.889219] Cannot allocate resource for EISA slot 4 [ 30.889222] Cannot allocate resource for EISA slot 5 [ 30.889238] EISA: Detected 0 cards. [ 30.889242] cpuidle: using governor ladder [ 30.889244] cpuidle: using governor menu [ 30.889335] TCP cubic registered [ 30.889394] NET: Registered protocol family 1 [ 30.889424] Using IPI No-Shortcut mode [ 30.889579] Magic number: 3:835:347 [ 30.889738] hash matches device pci0000:00 [ 30.890157] Freeing unused kernel memory: 364k freed [ 32.383479] ACPI: Fan [FAN] (on) [ 32.390825] ACPI: Thermal Zone [THRM] (53 C) [ 33.513520] usbcore: registered new interface driver usbfs [ 33.513552] usbcore: registered new interface driver hub [ 33.522302] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 33.522669] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 33.522678] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 33.522686] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 33.537806] usbcore: registered new device driver usb [ 33.558168] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 33.559336] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 33.566181] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.638342] SCSI subsystem initialized [ 33.697948] libata version 3.00 loaded. [ 33.809651] FDC 0 is a post-1991 82077 [ 34.042053] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:50:8d:f1:f1:bf [ 34.042059] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 34.042716] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 34.042724] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 34.042738] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 34.042742] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 34.042943] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 34.042962] ohci_hcd 0000:00:02.0: irq 17, io mem 0xec002000 [ 34.099712] usb usb1: configuration #1 chosen from 1 choice [ 34.099741] hub 1-0:1.0: USB hub found [ 34.099750] hub 1-0:1.0: 3 ports detected [ 34.201942] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 34.201952] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 34.201968] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 34.201972] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 34.202001] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 34.202020] ohci_hcd 0000:00:02.1: irq 18, io mem 0xec005000 [ 34.259504] usb usb2: configuration #1 chosen from 1 choice [ 34.259535] hub 2-0:1.0: USB hub found [ 34.259543] hub 2-0:1.0: 3 ports detected [ 34.362096] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 34.362103] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 34.362117] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 34.362121] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 34.362151] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 34.362182] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 34.362190] ehci_hcd 0000:00:02.2: debug port 1 [ 34.362195] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 34.362206] ehci_hcd 0000:00:02.2: irq 16, io mem 0xec006000 [ 34.505150] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 34.505176] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 34.505304] usb usb3: configuration #1 chosen from 1 choice [ 34.505334] hub 3-0:1.0: USB hub found [ 34.505340] hub 3-0:1.0: 6 ports detected [ 34.609488] NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at PCI slot 0000:00:09.0 [ 34.609520] NFORCE2: not 100% native mode: will probe irqs later [ 34.609528] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 34.609536] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 34.609547] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 34.609554] Probing IDE interface ide0... [ 35.176443] Probing IDE interface ide1... [ 35.185388] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 35.397525] usb 1-2: configuration #1 chosen from 1 choice [ 35.423177] usbcore: registered new interface driver hiddev [ 35.428643] input: Logitech USB Receiver as /class/input/input1 [ 35.440208] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 35.448368] Fixing up Logitech keyboard report descriptor [ 35.449093] input: Logitech USB Receiver as /class/input/input2 [ 35.476186] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 35.476205] usbcore: registered new interface driver usbhid [ 35.476209] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 36.583071] hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive [ 36.583104] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 36.583186] hdc: UDMA 2 mode selected [ 36.583314] ide1 at 0x170-0x177,0x376 on irq 15 [ 36.587964] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 [ 36.587970] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17 [ 36.587977] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 36.639721] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ec003000-ec0037ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 36.670914] sata_sil 0000:01:0b.0: version 2.3 [ 36.671198] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 36.671206] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 36.678977] scsi0 : sata_sil [ 36.679147] scsi1 : sata_sil [ 36.679180] ata1: SATA max UDMA/100 mmio m512@0xeb00d000 tf 0xeb00d080 irq 19 [ 36.679184] ata2: SATA max UDMA/100 mmio m512@0xeb00d000 tf 0xeb00d0c0 irq 19 [ 37.146389] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 37.175928] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 37.175932] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1) [ 37.182892] ata1.00: configured for UDMA/100 [ 37.649854] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 37.659356] ata2.00: ATA-6: WDC WD1200JB-00FUA0, 15.05R15, max UDMA/100 [ 37.659360] ata2.00: 234441648 sectors, multi 16: LBA48 [ 37.659362] ata2.00: applying bridge limits [ 37.665881] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40) [ 37.665884] ata2.00: revalidation failed (errno=-5) [ 37.665927] ata2: failed to recover some devices, retrying in 5 secs [ 37.780139] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 38.049518] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000508df0f1bf] [ 43.251933] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 43.260318] ata2.00: failed to read native max address (err_mask=0x40) [ 43.260322] ata2.00: revalidation failed (errno=-5) [ 43.260364] ata2: failed to recover some devices, retrying in 5 secs [ 48.846020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.854401] ata2.00: failed to read native max address (err_mask=0x40) [ 48.854404] ata2.00: revalidation failed (errno=-5) [ 48.854446] ata2.00: disabled [ 49.357472] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen t4 [ 49.357523] ata2: hard resetting link [ 50.236556] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 50.244932] ata2.00: failed to read native max address (err_mask=0x40) [ 50.244935] ata2: failed to recover some devices, retrying in 5 secs [ 55.243249] ata2: hard resetting link [ 55.830645] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 55.839023] ata2.00: failed to read native max address (err_mask=0x40) [ 55.839026] ata2.00: revalidation failed (errno=-5) [ 55.839067] ata2: failed to recover some devices, retrying in 5 secs [ 60.837335] ata2: hard resetting link [ 61.424733] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 61.433114] ata2.00: failed to read native max address (err_mask=0x40) [ 61.433118] ata2.00: revalidation failed (errno=-5) [ 61.433158] ata2.00: disabled [ 61.936180] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen t3 [ 61.936231] ata2: hard resetting link [ 62.815267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 62.823648] ata2.00: failed to read native max address (err_mask=0x40) [ 62.823651] ata2: failed to recover some devices, retrying in 5 secs [ 67.821961] ata2: hard resetting link [ 68.409357] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 68.417738] ata2.00: failed to read native max address (err_mask=0x40) [ 68.417741] ata2.00: revalidation failed (errno=-5) [ 68.417783] ata2: failed to recover some devices, retrying in 5 secs [ 73.416051] ata2: hard resetting link [ 74.003445] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 74.011826] ata2.00: failed to read native max address (err_mask=0x40) [ 74.011829] ata2.00: revalidation failed (errno=-5) [ 74.011870] ata2.00: disabled [ 74.514891] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen t2 [ 74.514942] ata2: hard resetting link [ 75.393976] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 75.402357] ata2.00: failed to read native max address (err_mask=0x40) [ 75.402361] ata2: failed to recover some devices, retrying in 5 secs [ 80.400675] ata2: hard resetting link [ 80.988068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 80.996448] ata2.00: failed to read native max address (err_mask=0x40) [ 80.996451] ata2.00: revalidation failed (errno=-5) [ 80.996493] ata2: failed to recover some devices, retrying in 5 secs [ 85.994765] ata2: hard resetting link [ 86.582160] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 86.590540] ata2.00: failed to read native max address (err_mask=0x40) [ 86.590543] ata2.00: revalidation failed (errno=-5) [ 86.590584] ata2.00: disabled [ 87.093606] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen t1 [ 87.093656] ata2: hard resetting link [ 87.972689] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 87.981067] ata2.00: failed to read native max address (err_mask=0x40) [ 87.981070] ata2: failed to recover some devices, retrying in 5 secs [ 92.979386] ata2: hard resetting link [ 93.566783] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 93.575164] ata2.00: failed to read native max address (err_mask=0x40) [ 93.575167] ata2.00: revalidation failed (errno=-5) [ 93.575209] ata2: failed to recover some devices, retrying in 5 secs [ 98.573478] ata2: hard resetting link [ 99.160872] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 99.169252] ata2.00: failed to read native max address (err_mask=0x40) [ 99.169255] ata2.00: revalidation failed (errno=-5) [ 99.169296] ata2.00: disabled [ 99.672312] ata2: EH pending after 5 tries, giving up [ 99.672353] ata2: EH complete [ 99.672476] scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 99.676099] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 99.676109] ACPI: PCI Interrupt 0000:01:08.2[B] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 20 [ 99.726888] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[eb00e000-eb00e7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 99.738634] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 99.738653] sd 0:0:0:0: [sda] Write Protect is off [ 99.738656] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 99.738676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 99.738727] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 99.738738] sd 0:0:0:0: [sda] Write Protect is off [ 99.738741] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 99.738757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 99.738761] sda: sda1 sda2 sda3 <<6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 99.750959] Uniform CD-ROM driver Revision: 3.20 [ 99.760245] sda5 sda6 sda7 sda8 sda9 > sda4 [ 99.802621] sd 0:0:0:0: [sda] Attached SCSI disk [ 99.808569] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 100.055933] ata2: soft resetting link [ 100.211772] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 100.211804] ata2: EH complete [ 100.214296] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen [ 100.214352] ata2: hard resetting link [ 100.278089] Attempting manual resume [ 100.278094] swsusp: Resume From Partition 8:8 [ 100.278096] PM: Checking swsusp image. [ 100.278334] PM: Resume from disk failed. [ 100.314279] kjournald starting. Commit interval 5 seconds [ 100.314296] EXT3-fs: mounted filesystem with ordered data mode. [ 101.007021] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c00200057f8] [ 101.090832] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 101.090967] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 101.090971] ata2: failed to recover some devices, retrying in 5 secs [ 105.535796] eth0: no link during initialization. [ 106.089563] ata2: hard resetting link [ 106.653227] NET: Registered protocol family 17 [ 106.676966] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 107.035834] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 107.035840] ata2: failed to recover some devices, retrying in 5 secs [ 107.110280] Linux agpgart interface v0.102 [ 107.144551] agpgart: Detected NVIDIA nForce2 chipset [ 107.184497] agpgart: AGP aperture is 128M @ 0xd0000000 [ 107.404353] input: Power Button (FF) as /class/input/input3 [ 107.432221] ACPI: Power Button (FF) [PWRF] [ 107.432305] input: Power Button (CM) as /class/input/input4 [ 107.464178] ACPI: Power Button (CM) [PWRB] [ 107.728019] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 107.728056] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 109.522708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 109.541514] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 109.865747] input: PC Speaker as /class/input/input5 [ 110.229938] gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0x9400, speed 59659kHz [ 110.473816] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 110.589537] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 110.614317] phy0: Selected rate control algorithm 'simple' [ 110.717986] HiSax: Linux Driver for passive ISDN cards [ 110.717992] HiSax: Version 3.5 (module) [ 110.717995] HiSax: Layer1 Revision 2.46.2.5 [ 110.717997] HiSax: Layer2 Revision 2.30.2.4 [ 110.717999] HiSax: TeiMgr Revision 2.20.2.3 [ 110.718001] HiSax: Layer3 Revision 2.22.2.3 [ 110.718003] HiSax: LinkLayer Revision 2.59.2.4 [ 110.804915] parport_pc 00:0c: reported by Plug and Play ACPI [ 110.805034] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 111.068497] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 111.068507] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 [ 111.554611] fuse init (API version 7.9) [ 111.592053] lp0: using parport0 (interrupt-driven). [ 111.686838] Adding 714852k swap on /dev/disk/by-uuid/fd9e8098-4e34-40d1-bc92-2ef729322f8b. Priority:-1 extents:1 across:714852k [ 111.840534] EXT3 FS on sda9, internal journal [ 112.031264] ata2: hard resetting link [ 112.626664] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 112.971586] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 112.971592] ata2: failed to recover some devices, retrying in 5 secs [ 117.968989] ata2: hard resetting link [ 118.556383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 118.556407] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 119.271604] ata2: soft resetting link [ 119.427464] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 119.435442] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 119.435447] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 119.435474] [] ata_hsm_move+0x4e0/0x880 [libata] [ 119.435516] [] process_timeout+0x0/0x10 [ 119.435525] [] schedule_timeout+0x45/0xd0 [ 119.435537] [] ata_pio_task+0x0/0xf0 [libata] [ 119.435555] [] ata_pio_task+0x59/0xf0 [libata] [ 119.435575] [] run_workqueue+0xbf/0x160 [ 119.435586] [] worker_thread+0x0/0xe0 [ 119.435591] [] worker_thread+0x84/0xe0 [ 119.435596] [] autoremove_wake_function+0x0/0x40 [ 119.435604] [] worker_thread+0x0/0xe0 [ 119.435608] [] kthread+0x42/0x70 [ 119.435612] [] kthread+0x0/0x70 [ 119.435617] [] kernel_thread_helper+0x7/0x10 [ 119.435626] ======================= [ 119.435993] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 119.435996] ata2: failed to recover some devices, retrying in 5 secs [ 124.434156] ata2: hard resetting link [ 125.021552] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 125.029533] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 125.029536] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 125.029542] [] ata_hsm_move+0x4e0/0x880 [libata] [ 125.029567] [] delay_tsc+0x27/0x50 [ 125.029579] [] ata_pio_task+0x0/0xf0 [libata] [ 125.029597] [] ata_pio_task+0x59/0xf0 [libata] [ 125.029613] [] complete+0x40/0x60 [ 125.029622] [] run_workqueue+0xbf/0x160 [ 125.029631] [] worker_thread+0x0/0xe0 [ 125.029636] [] worker_thread+0x84/0xe0 [ 125.029641] [] autoremove_wake_function+0x0/0x40 [ 125.029647] [] worker_thread+0x0/0xe0 [ 125.029652] [] kthread+0x42/0x70 [ 125.029655] [] kthread+0x0/0x70 [ 125.029659] [] kernel_thread_helper+0x7/0x10 [ 125.029667] ======================= [ 125.030032] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 125.030034] ata2: failed to recover some devices, retrying in 5 secs [ 130.028255] ata2: hard resetting link [ 130.615645] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 130.623624] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 130.623629] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 130.623654] [] ata_hsm_move+0x4e0/0x880 [libata] [ 130.623695] [] process_timeout+0x0/0x10 [ 130.623703] [] schedule_timeout+0x45/0xd0 [ 130.623714] [] ata_pio_task+0x0/0xf0 [libata] [ 130.623732] [] ata_pio_task+0x59/0xf0 [libata] [ 130.623749] [] complete+0x40/0x60 [ 130.623759] [] run_workqueue+0xbf/0x160 [ 130.623769] [] worker_thread+0x0/0xe0 [ 130.623774] [] worker_thread+0x84/0xe0 [ 130.623779] [] autoremove_wake_function+0x0/0x40 [ 130.623787] [] worker_thread+0x0/0xe0 [ 130.623791] [] kthread+0x42/0x70 [ 130.623794] [] kthread+0x0/0x70 [ 130.623799] [] kernel_thread_helper+0x7/0x10 [ 130.623808] ======================= [ 130.624176] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 130.624179] ata2: failed to recover some devices, retrying in 5 secs [ 135.622341] ata2: hard resetting link [ 136.209735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 136.209760] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t3 [ 136.924959] ata2: soft resetting link [ 137.080817] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 137.088795] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 137.088799] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 137.088824] [] ata_hsm_move+0x4e0/0x880 [libata] [ 137.088864] [] process_timeout+0x0/0x10 [ 137.088872] [] schedule_timeout+0x45/0xd0 [ 137.088884] [] ata_pio_task+0x0/0xf0 [libata] [ 137.088902] [] ata_pio_task+0x59/0xf0 [libata] [ 137.088918] [] complete+0x40/0x60 [ 137.088927] [] run_workqueue+0xbf/0x160 [ 137.088938] [] worker_thread+0x0/0xe0 [ 137.088942] [] worker_thread+0x84/0xe0 [ 137.088947] [] autoremove_wake_function+0x0/0x40 [ 137.088955] [] worker_thread+0x0/0xe0 [ 137.088959] [] kthread+0x42/0x70 [ 137.088962] [] kthread+0x0/0x70 [ 137.088966] [] kernel_thread_helper+0x7/0x10 [ 137.088976] ======================= [ 137.089343] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 137.089346] ata2: failed to recover some devices, retrying in 5 secs [ 142.087511] ata2: hard resetting link [ 142.674904] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 142.682884] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 142.682889] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 142.682913] [] ata_hsm_move+0x4e0/0x880 [libata] [ 142.682954] [] process_timeout+0x0/0x10 [ 142.682962] [] schedule_timeout+0x45/0xd0 [ 142.682974] [] ata_pio_task+0x0/0xf0 [libata] [ 142.682991] [] ata_pio_task+0x59/0xf0 [libata] [ 142.683008] [] complete+0x40/0x60 [ 142.683018] [] run_workqueue+0xbf/0x160 [ 142.683028] [] worker_thread+0x0/0xe0 [ 142.683033] [] worker_thread+0x84/0xe0 [ 142.683038] [] autoremove_wake_function+0x0/0x40 [ 142.683046] [] worker_thread+0x0/0xe0 [ 142.683050] [] kthread+0x42/0x70 [ 142.683053] [] kthread+0x0/0x70 [ 142.683058] [] kernel_thread_helper+0x7/0x10 [ 142.683067] ======================= [ 142.683435] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 142.683438] ata2: failed to recover some devices, retrying in 5 secs [ 147.363234] NET: Registered protocol family 10 [ 147.363487] lo: Disabled Privacy Extensions [ 147.364038] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 147.681607] ata2: hard resetting link [ 148.268997] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 148.276976] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 148.276982] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 148.277010] [] ata_hsm_move+0x4e0/0x880 [libata] [ 148.277052] [] process_timeout+0x0/0x10 [ 148.277060] [] schedule_timeout+0x45/0xd0 [ 148.277072] [] ata_pio_task+0x0/0xf0 [libata] [ 148.277090] [] ata_pio_task+0x59/0xf0 [libata] [ 148.277107] [] complete+0x40/0x60 [ 148.277116] [] run_workqueue+0xbf/0x160 [ 148.277126] [] worker_thread+0x0/0xe0 [ 148.277132] [] worker_thread+0x84/0xe0 [ 148.277137] [] autoremove_wake_function+0x0/0x40 [ 148.277144] [] worker_thread+0x0/0xe0 [ 148.277149] [] kthread+0x42/0x70 [ 148.277152] [] kthread+0x0/0x70 [ 148.277156] [] kernel_thread_helper+0x7/0x10 [ 148.277166] ======================= [ 148.277533] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 148.277536] ata2: failed to recover some devices, retrying in 5 secs [ 153.275690] ata2: hard resetting link [ 153.863086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 153.863109] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t2 [ 154.578311] ata2: soft resetting link [ 154.734168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 154.742146] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 154.742150] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 154.742156] [] ata_hsm_move+0x4e0/0x880 [libata] [ 154.742180] [] process_timeout+0x0/0x10 [ 154.742186] [] schedule_timeout+0x45/0xd0 [ 154.742195] [] ata_pio_task+0x0/0xf0 [libata] [ 154.742212] [] ata_pio_task+0x59/0xf0 [libata] [ 154.742229] [] complete+0x40/0x60 [ 154.742236] [] run_workqueue+0xbf/0x160 [ 154.742245] [] worker_thread+0x0/0xe0 [ 154.742249] [] worker_thread+0x84/0xe0 [ 154.742255] [] autoremove_wake_function+0x0/0x40 [ 154.742261] [] worker_thread+0x0/0xe0 [ 154.742266] [] kthread+0x42/0x70 [ 154.742269] [] kthread+0x0/0x70 [ 154.742273] [] kernel_thread_helper+0x7/0x10 [ 154.742281] ======================= [ 154.742646] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 154.742649] ata2: failed to recover some devices, retrying in 5 secs [ 159.740860] ata2: hard resetting link [ 160.328257] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 160.336237] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 160.336241] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 160.336246] [] ata_hsm_move+0x4e0/0x880 [libata] [ 160.336270] [] process_timeout+0x0/0x10 [ 160.336275] [] schedule_timeout+0x45/0xd0 [ 160.336284] [] ata_pio_task+0x0/0xf0 [libata] [ 160.336302] [] ata_pio_task+0x59/0xf0 [libata] [ 160.336318] [] complete+0x40/0x60 [ 160.336325] [] run_workqueue+0xbf/0x160 [ 160.336334] [] worker_thread+0x0/0xe0 [ 160.336339] [] worker_thread+0x84/0xe0 [ 160.336344] [] autoremove_wake_function+0x0/0x40 [ 160.336350] [] worker_thread+0x0/0xe0 [ 160.336355] [] kthread+0x42/0x70 [ 160.336358] [] kthread+0x0/0x70 [ 160.336362] [] kernel_thread_helper+0x7/0x10 [ 160.336370] ======================= [ 160.336735] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 160.336737] ata2: failed to recover some devices, retrying in 5 secs [ 165.334951] ata2: hard resetting link [ 165.922347] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 165.930327] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 165.930331] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 165.930336] [] ata_hsm_move+0x4e0/0x880 [libata] [ 165.930360] [] process_timeout+0x0/0x10 [ 165.930365] [] schedule_timeout+0x45/0xd0 [ 165.930374] [] ata_pio_task+0x0/0xf0 [libata] [ 165.930391] [] ata_pio_task+0x59/0xf0 [libata] [ 165.930408] [] complete+0x40/0x60 [ 165.930414] [] run_workqueue+0xbf/0x160 [ 165.930423] [] worker_thread+0x0/0xe0 [ 165.930428] [] worker_thread+0x84/0xe0 [ 165.930433] [] autoremove_wake_function+0x0/0x40 [ 165.930439] [] worker_thread+0x0/0xe0 [ 165.930444] [] kthread+0x42/0x70 [ 165.930447] [] kthread+0x0/0x70 [ 165.930452] [] kernel_thread_helper+0x7/0x10 [ 165.930459] ======================= [ 165.930824] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 165.930827] ata2: failed to recover some devices, retrying in 5 secs [ 170.929045] ata2: hard resetting link [ 171.516440] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 171.516463] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t1 [ 172.231664] ata2: soft resetting link [ 172.387522] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 172.395499] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 172.395503] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 172.395513] [] ata_hsm_move+0x4e0/0x880 [libata] [ 172.395545] [] process_timeout+0x0/0x10 [ 172.395552] [] schedule_timeout+0x45/0xd0 [ 172.395562] [] ata_pio_task+0x0/0xf0 [libata] [ 172.395580] [] ata_pio_task+0x59/0xf0 [libata] [ 172.395596] [] complete+0x40/0x60 [ 172.395604] [] run_workqueue+0xbf/0x160 [ 172.395614] [] worker_thread+0x0/0xe0 [ 172.395619] [] worker_thread+0x84/0xe0 [ 172.395624] [] autoremove_wake_function+0x0/0x40 [ 172.395631] [] worker_thread+0x0/0xe0 [ 172.395636] [] kthread+0x42/0x70 [ 172.395639] [] kthread+0x0/0x70 [ 172.395643] [] kernel_thread_helper+0x7/0x10 [ 172.395652] ======================= [ 172.396018] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 172.396021] ata2: failed to recover some devices, retrying in 5 secs [ 177.394213] ata2: hard resetting link [ 177.981609] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 177.989590] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 177.989594] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 177.989599] [] ata_hsm_move+0x4e0/0x880 [libata] [ 177.989622] [] process_timeout+0x0/0x10 [ 177.989627] [] schedule_timeout+0x45/0xd0 [ 177.989637] [] ata_pio_task+0x0/0xf0 [libata] [ 177.989654] [] ata_pio_task+0x59/0xf0 [libata] [ 177.989670] [] complete+0x40/0x60 [ 177.989677] [] run_workqueue+0xbf/0x160 [ 177.989686] [] worker_thread+0x0/0xe0 [ 177.989690] [] worker_thread+0x84/0xe0 [ 177.989696] [] autoremove_wake_function+0x0/0x40 [ 177.989702] [] worker_thread+0x0/0xe0 [ 177.989707] [] kthread+0x42/0x70 [ 177.989710] [] kthread+0x0/0x70 [ 177.989714] [] kernel_thread_helper+0x7/0x10 [ 177.989722] ======================= [ 177.990087] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 177.990089] ata2: failed to recover some devices, retrying in 5 secs [ 182.988311] ata2: hard resetting link [ 183.575700] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 183.583679] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 183.583684] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 183.583710] [] ata_hsm_move+0x4e0/0x880 [libata] [ 183.583752] [] process_timeout+0x0/0x10 [ 183.583761] [] schedule_timeout+0x45/0xd0 [ 183.583773] [] ata_pio_task+0x0/0xf0 [libata] [ 183.583790] [] ata_pio_task+0x59/0xf0 [libata] [ 183.583807] [] complete+0x40/0x60 [ 183.583817] [] run_workqueue+0xbf/0x160 [ 183.583828] [] worker_thread+0x0/0xe0 [ 183.583833] [] worker_thread+0x84/0xe0 [ 183.583838] [] autoremove_wake_function+0x0/0x40 [ 183.583846] [] worker_thread+0x0/0xe0 [ 183.583850] [] kthread+0x42/0x70 [ 183.583853] [] kthread+0x0/0x70 [ 183.583858] [] kernel_thread_helper+0x7/0x10 [ 183.583868] ======================= [ 183.584235] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 183.584238] ata2: failed to recover some devices, retrying in 5 secs [ 188.582398] ata2: hard resetting link [ 189.169789] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 189.169805] ata2: EH pending after 5 tries, giving up [ 189.169859] ata2: EH complete [ 197.705388] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen [ 197.705455] ata2: hard resetting link [ 198.583850] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 198.591828] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 198.591833] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 198.591858] [] ata_hsm_move+0x4e0/0x880 [libata] [ 198.591899] [] process_timeout+0x0/0x10 [ 198.591907] [] schedule_timeout+0x45/0xd0 [ 198.591919] [] ata_pio_task+0x0/0xf0 [libata] [ 198.591936] [] ata_pio_task+0x59/0xf0 [libata] [ 198.591953] [] complete+0x40/0x60 [ 198.591963] [] run_workqueue+0xbf/0x160 [ 198.591973] [] worker_thread+0x0/0xe0 [ 198.591978] [] worker_thread+0x84/0xe0 [ 198.591983] [] autoremove_wake_function+0x0/0x40 [ 198.591991] [] worker_thread+0x0/0xe0 [ 198.591995] [] kthread+0x42/0x70 [ 198.591999] [] kthread+0x0/0x70 [ 198.592003] [] kernel_thread_helper+0x7/0x10 [ 198.592013] ======================= [ 198.592380] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 198.592383] ata2: failed to recover some devices, retrying in 5 secs [ 203.590545] ata2: hard resetting link [ 204.177939] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 204.185917] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 204.185922] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 204.185946] [] ata_hsm_move+0x4e0/0x880 [libata] [ 204.185986] [] process_timeout+0x0/0x10 [ 204.185994] [] schedule_timeout+0x45/0xd0 [ 204.186006] [] ata_pio_task+0x0/0xf0 [libata] [ 204.186024] [] ata_pio_task+0x59/0xf0 [libata] [ 204.186041] [] complete+0x40/0x60 [ 204.186050] [] run_workqueue+0xbf/0x160 [ 204.186060] [] worker_thread+0x0/0xe0 [ 204.186065] [] worker_thread+0x84/0xe0 [ 204.186070] [] autoremove_wake_function+0x0/0x40 [ 204.186078] [] worker_thread+0x0/0xe0 [ 204.186083] [] kthread+0x42/0x70 [ 204.186086] [] kthread+0x0/0x70 [ 204.186090] [] kernel_thread_helper+0x7/0x10 [ 204.186099] ======================= [ 204.186466] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 204.186469] ata2: failed to recover some devices, retrying in 5 secs [ 209.184633] ata2: hard resetting link [ 209.772033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 209.780010] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 209.780015] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 209.780039] [] ata_hsm_move+0x4e0/0x880 [libata] [ 209.780080] [] process_timeout+0x0/0x10 [ 209.780088] [] schedule_timeout+0x45/0xd0 [ 209.780100] [] ata_pio_task+0x0/0xf0 [libata] [ 209.780118] [] ata_pio_task+0x59/0xf0 [libata] [ 209.780135] [] complete+0x40/0x60 [ 209.780144] [] run_workqueue+0xbf/0x160 [ 209.780154] [] worker_thread+0x0/0xe0 [ 209.780159] [] worker_thread+0x84/0xe0 [ 209.780164] [] autoremove_wake_function+0x0/0x40 [ 209.780172] [] worker_thread+0x0/0xe0 [ 209.780176] [] kthread+0x42/0x70 [ 209.780179] [] kthread+0x0/0x70 [ 209.780184] [] kernel_thread_helper+0x7/0x10 [ 209.780193] ======================= [ 209.780560] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 209.780564] ata2: failed to recover some devices, retrying in 5 secs [ 214.778744] ata2: hard resetting link [ 215.366125] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 215.366154] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 216.081345] ata2: soft resetting link [ 216.237203] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 216.245180] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 216.245185] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 216.245212] [] ata_hsm_move+0x4e0/0x880 [libata] [ 216.245253] [] process_timeout+0x0/0x10 [ 216.245261] [] schedule_timeout+0x45/0xd0 [ 216.245273] [] ata_pio_task+0x0/0xf0 [libata] [ 216.245291] [] ata_pio_task+0x59/0xf0 [libata] [ 216.245308] [] complete+0x40/0x60 [ 216.245317] [] run_workqueue+0xbf/0x160 [ 216.245328] [] worker_thread+0x0/0xe0 [ 216.245333] [] worker_thread+0x84/0xe0 [ 216.245338] [] autoremove_wake_function+0x0/0x40 [ 216.245346] [] worker_thread+0x0/0xe0 [ 216.245350] [] kthread+0x42/0x70 [ 216.245353] [] kthread+0x0/0x70 [ 216.245358] [] kernel_thread_helper+0x7/0x10 [ 216.245367] ======================= [ 216.245735] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 216.245738] ata2: failed to recover some devices, retrying in 5 secs [ 221.243894] ata2: hard resetting link [ 221.831290] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 221.839270] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 221.839274] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 221.839281] [] ata_hsm_move+0x4e0/0x880 [libata] [ 221.839305] [] process_timeout+0x0/0x10 [ 221.839310] [] schedule_timeout+0x45/0xd0 [ 221.839319] [] ata_pio_task+0x0/0xf0 [libata] [ 221.839337] [] ata_pio_task+0x59/0xf0 [libata] [ 221.839354] [] complete+0x40/0x60 [ 221.839360] [] run_workqueue+0xbf/0x160 [ 221.839369] [] worker_thread+0x0/0xe0 [ 221.839374] [] worker_thread+0x84/0xe0 [ 221.839379] [] autoremove_wake_function+0x0/0x40 [ 221.839385] [] worker_thread+0x0/0xe0 [ 221.839390] [] kthread+0x42/0x70 [ 221.839393] [] kthread+0x0/0x70 [ 221.839397] [] kernel_thread_helper+0x7/0x10 [ 221.839405] ======================= [ 221.839770] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 221.839773] ata2: failed to recover some devices, retrying in 5 secs [ 226.837990] ata2: hard resetting link [ 227.425382] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 227.433362] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 227.433367] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 227.433385] [] ata_hsm_move+0x4e0/0x880 [libata] [ 227.433423] [] process_timeout+0x0/0x10 [ 227.433431] [] schedule_timeout+0x45/0xd0 [ 227.433442] [] ata_pio_task+0x0/0xf0 [libata] [ 227.433459] [] ata_pio_task+0x59/0xf0 [libata] [ 227.433476] [] complete+0x40/0x60 [ 227.433485] [] run_workqueue+0xbf/0x160 [ 227.433495] [] worker_thread+0x0/0xe0 [ 227.433500] [] worker_thread+0x84/0xe0 [ 227.433505] [] autoremove_wake_function+0x0/0x40 [ 227.433512] [] worker_thread+0x0/0xe0 [ 227.433517] [] kthread+0x42/0x70 [ 227.433520] [] kthread+0x0/0x70 [ 227.433524] [] kernel_thread_helper+0x7/0x10 [ 227.433533] ======================= [ 227.433902] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 227.433906] ata2: failed to recover some devices, retrying in 5 secs [ 232.432082] ata2: hard resetting link [ 233.019473] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 233.019499] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t3 [ 233.734697] ata2: soft resetting link [ 233.890554] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 233.898532] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 233.898537] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 233.898563] [] ata_hsm_move+0x4e0/0x880 [libata] [ 233.898604] [] process_timeout+0x0/0x10 [ 233.898613] [] schedule_timeout+0x45/0xd0 [ 233.898624] [] ata_pio_task+0x0/0xf0 [libata] [ 233.898642] [] ata_pio_task+0x59/0xf0 [libata] [ 233.898659] [] complete+0x40/0x60 [ 233.898668] [] run_workqueue+0xbf/0x160 [ 233.898679] [] worker_thread+0x0/0xe0 [ 233.898684] [] worker_thread+0x84/0xe0 [ 233.898689] [] autoremove_wake_function+0x0/0x40 [ 233.898697] [] worker_thread+0x0/0xe0 [ 233.898701] [] kthread+0x42/0x70 [ 233.898704] [] kthread+0x0/0x70 [ 233.898709] [] kernel_thread_helper+0x7/0x10 [ 233.898718] ======================= [ 233.899086] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 233.899089] ata2: failed to recover some devices, retrying in 5 secs [ 238.897247] ata2: hard resetting link [ 239.484644] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 239.492623] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 239.492627] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 239.492636] [] ata_hsm_move+0x4e0/0x880 [libata] [ 239.492665] [] process_timeout+0x0/0x10 [ 239.492671] [] schedule_timeout+0x45/0xd0 [ 239.492681] [] ata_pio_task+0x0/0xf0 [libata] [ 239.492699] [] ata_pio_task+0x59/0xf0 [libata] [ 239.492715] [] complete+0x40/0x60 [ 239.492723] [] run_workqueue+0xbf/0x160 [ 239.492733] [] worker_thread+0x0/0xe0 [ 239.492737] [] worker_thread+0x84/0xe0 [ 239.492743] [] autoremove_wake_function+0x0/0x40 [ 239.492749] [] worker_thread+0x0/0xe0 [ 239.492754] [] kthread+0x42/0x70 [ 239.492757] [] kthread+0x0/0x70 [ 239.492761] [] kernel_thread_helper+0x7/0x10 [ 239.492770] ======================= [ 239.493135] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 239.493138] ata2: failed to recover some devices, retrying in 5 secs [ 244.491345] ata2: hard resetting link [ 245.078734] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 245.086712] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 245.086718] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 245.086742] [] ata_hsm_move+0x4e0/0x880 [libata] [ 245.086782] [] process_timeout+0x0/0x10 [ 245.086790] [] schedule_timeout+0x45/0xd0 [ 245.086801] [] ata_pio_task+0x0/0xf0 [libata] [ 245.086819] [] ata_pio_task+0x59/0xf0 [libata] [ 245.086836] [] complete+0x40/0x60 [ 245.086845] [] run_workqueue+0xbf/0x160 [ 245.086856] [] worker_thread+0x0/0xe0 [ 245.086860] [] worker_thread+0x84/0xe0 [ 245.086866] [] autoremove_wake_function+0x0/0x40 [ 245.086873] [] worker_thread+0x0/0xe0 [ 245.086878] [] kthread+0x42/0x70 [ 245.086881] [] kthread+0x0/0x70 [ 245.086885] [] kernel_thread_helper+0x7/0x10 [ 245.086895] ======================= [ 245.087262] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 245.087265] ata2: failed to recover some devices, retrying in 5 secs [ 250.085438] ata2: hard resetting link [ 250.672827] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 250.672854] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t2 [ 251.388049] ata2: soft resetting link [ 251.543908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 251.551886] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 251.551891] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 251.551917] [] ata_hsm_move+0x4e0/0x880 [libata] [ 251.551958] [] process_timeout+0x0/0x10 [ 251.551967] [] schedule_timeout+0x45/0xd0 [ 251.551979] [] ata_pio_task+0x0/0xf0 [libata] [ 251.551997] [] ata_pio_task+0x59/0xf0 [libata] [ 251.552014] [] complete+0x40/0x60 [ 251.552023] [] run_workqueue+0xbf/0x160 [ 251.552034] [] worker_thread+0x0/0xe0 [ 251.552039] [] worker_thread+0x84/0xe0 [ 251.552044] [] autoremove_wake_function+0x0/0x40 [ 251.552052] [] worker_thread+0x0/0xe0 [ 251.552056] [] kthread+0x42/0x70 [ 251.552059] [] kthread+0x0/0x70 [ 251.552064] [] kernel_thread_helper+0x7/0x10 [ 251.552073] ======================= [ 251.552440] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 251.552443] ata2: failed to recover some devices, retrying in 5 secs [ 256.550596] ata2: hard resetting link [ 257.137994] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 257.145975] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 257.145979] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 257.145984] [] ata_hsm_move+0x4e0/0x880 [libata] [ 257.146008] [] process_timeout+0x0/0x10 [ 257.146013] [] schedule_timeout+0x45/0xd0 [ 257.146022] [] ata_pio_task+0x0/0xf0 [libata] [ 257.146040] [] ata_pio_task+0x59/0xf0 [libata] [ 257.146056] [] complete+0x40/0x60 [ 257.146063] [] run_workqueue+0xbf/0x160 [ 257.146072] [] worker_thread+0x0/0xe0 [ 257.146077] [] worker_thread+0x84/0xe0 [ 257.146082] [] autoremove_wake_function+0x0/0x40 [ 257.146088] [] worker_thread+0x0/0xe0 [ 257.146093] [] kthread+0x42/0x70 [ 257.146096] [] kthread+0x0/0x70 [ 257.146100] [] kernel_thread_helper+0x7/0x10 [ 257.146108] ======================= [ 257.146473] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 257.146476] ata2: failed to recover some devices, retrying in 5 secs [ 262.144698] ata2: hard resetting link [ 262.732098] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 262.740072] WARNING: at /build/buildd/linux-2.6.24/drivers/ata/libata-core.c:5386 ata_hsm_move() [ 262.740079] Pid: 2184, comm: ata/0 Not tainted 2.6.24-1-generic #1 [ 262.740106] [] ata_hsm_move+0x4e0/0x880 [libata] [ 262.740147] [] process_timeout+0x0/0x10 [ 262.740155] [] schedule_timeout+0x45/0xd0 [ 262.740167] [] ata_pio_task+0x0/0xf0 [libata] [ 262.740185] [] ata_pio_task+0x59/0xf0 [libata] [ 262.740202] [] complete+0x40/0x60 [ 262.740211] [] run_workqueue+0xbf/0x160 [ 262.740221] [] worker_thread+0x0/0xe0 [ 262.740227] [] worker_thread+0x84/0xe0 [ 262.740232] [] autoremove_wake_function+0x0/0x40 [ 262.740240] [] worker_thread+0x0/0xe0 [ 262.740244] [] kthread+0x42/0x70 [ 262.740247] [] kthread+0x0/0x70 [ 262.740252] [] kernel_thread_helper+0x7/0x10 [ 262.740261] ======================= [ 262.740633] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 262.740637] ata2: failed to recover some devices, retrying in 5 secs