[   17.679550] Non-volatile memory driver v1.3
[   18.236583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.238915] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   18.239346] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   18.301075] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   18.301655] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   18.327075] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.985919] bbswitch: version 0.7
[   19.985925] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   19.985932] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
[   19.985943] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[   19.986025] bbswitch: detected an Optimus _DSM function
[   19.986036] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
[   19.990013] [drm] Module unloaded
[   20.008362] bbswitch: disabling discrete graphics
[   20.008375] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[   20.023476] pci_raw_set_power_state: 150 callbacks suppressed
[   20.023480] pci 0000:03:00.0: Refused to change power state, currently in D0
[   20.878353] init: plymouth-upstart-bridge main process ended, respawning
[   20.882825] init: plymouth-upstart-bridge main process (1547) terminated with status 1
[   20.882837] init: plymouth-upstart-bridge main process ended, respawning
[   21.751280] wlan0: authenticate with 4c:ac:0a:70:e2:cf
[   21.759407] wlan0: send auth to 4c:ac:0a:70:e2:cf (try 1/3)
[   21.762304] wlan0: authenticated
[   21.762379] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   21.762383] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   21.762454] wlan0: associate with 4c:ac:0a:70:e2:cf (try 1/3)
[   21.766584] wlan0: RX AssocResp from 4c:ac:0a:70:e2:cf (capab=0x411 status=0 aid=2)
[   21.770148] wlan0: associated
[   21.770172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.862091] init: plymouth-stop pre-start process (1708) terminated with status 1
[   24.133885] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   24.134034] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   24.629048] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   24.629193] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.410509] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.410659] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.410798] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.517625] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.566037] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   25.566182] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   46.956711] audit: type=1400 audit(1448008365.783:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2563 comm="apparmor_parser"
[   46.956718] audit: type=1400 audit(1448008365.783:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2563 comm="apparmor_parser"
[   46.957001] audit: type=1400 audit(1448008365.783:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2563 comm="apparmor_parser"
[ 1293.314113] e1000e: eth0 NIC Link is Down
[ 1293.323731] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1293.515173] wlan0: deauthenticating from 4c:ac:0a:70:e2:cf by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1295.051593] PM: Syncing filesystems ... done.
[ 1295.192563] PM: Preparing system for sleep (mem)
[ 1295.193037] bbswitch: enabling discrete graphics
[ 1295.318813] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1295.320522] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1295.321644] PM: Suspending system (mem)
[ 1295.321656] Suspending console(s) (use no_console_suspend to debug)
[ 1295.321915] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1295.322483] sd 1:0:0:0: [sda] Stopping disk
[ 1295.324116] e1000e: EEE TX LPI TIMER: 00000011
[ 1295.818210] PM: suspend of devices complete after 496.672 msecs
[ 1295.838125] PM: late suspend of devices complete after 19.922 msecs
[ 1295.838621] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1295.838764] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1295.856201] PM: noirq suspend of devices complete after 18.083 msecs
[ 1295.856449] ACPI: Preparing to enter system sleep state S3
[ 1295.874298] ACPI : EC: EC stopped
[ 1295.874299] PM: Saving platform NVS memory
[ 1295.874315] Disabling non-boot CPUs ...
[ 1295.875503] smpboot: CPU 1 is now offline
[ 1295.891533] smpboot: CPU 2 is now offline
[ 1295.906413] Broke affinity for irq 21
[ 1295.906415] Broke affinity for irq 42
[ 1295.906417] Broke affinity for irq 43
[ 1295.906418] Broke affinity for irq 44
[ 1295.906422] Broke affinity for irq 46
[ 1295.907433] smpboot: CPU 3 is now offline
[ 1295.923463] ACPI: Low-level resume complete
[ 1295.923514] ACPI : EC: EC started
[ 1295.923514] PM: Restoring platform NVS memory
[ 1295.923881] Enabling non-boot CPUs ...
[ 1295.923917] x86: Booting SMP configuration:
[ 1295.923918] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1295.935751]  cache: parent cpu1 should not be sleeping
[ 1295.935866] CPU1 is up
[ 1295.935882] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1295.947792]  cache: parent cpu2 should not be sleeping
[ 1295.947904] CPU2 is up
[ 1295.947924] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1295.959736]  cache: parent cpu3 should not be sleeping
[ 1295.959807] CPU3 is up
[ 1295.962764] ACPI: Waking up from system sleep state S3
[ 1296.415565] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1296.428158] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1296.428198] PM: noirq resume of devices complete after 28.774 msecs
[ 1296.434878] PM: early resume of devices complete after 6.667 msecs
[ 1296.434996] usb usb1: root hub lost power or was reset
[ 1296.434998] usb usb2: root hub lost power or was reset
[ 1296.437000] sd 1:0:0:0: [sda] Starting disk
[ 1296.437250] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 1296.663205] usb 3-1: reset high-speed USB device number 2 using ehci-pci
[ 1296.755187] ata1: SATA link down (SStatus 0 SControl 300)
[ 1297.075012] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[ 1297.168851] Bluetooth: hci0: turning off Intel device LED failed (-19)
[ 1297.238875] usb 3-1.6: reset high-speed USB device number 4 using ehci-pci
[ 1297.402829] usb 3-1.7: reset full-speed USB device number 5 using ehci-pci
[ 1297.504185] PM: resume of devices complete after 1069.897 msecs
[ 1297.504698] PM: Finishing wakeup.
[ 1297.504699] Restarting tasks ... 
[ 1297.505388] pci_bus 0000:01: Allocating resources
[ 1297.505402] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[ 1297.505406] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1297.505412] pci_bus 0000:02: Allocating resources
[ 1297.505424] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 1297.505427] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1297.505433] pci_bus 0000:03: Allocating resources
[ 1297.505444] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.505453] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1297.505455] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1297.505457] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1297.505459] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1297.505462] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1297.505464] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1297.505466] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1297.505468] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1297.505476] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xcf800000-0xcf9fffff 64bit pref]
[ 1297.505480] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
[ 1297.505484] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[ 1297.505487] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[ 1297.505757] pci_bus 0000:01: Allocating resources
[ 1297.505771] pci_bus 0000:02: Allocating resources
[ 1297.505786] pci_bus 0000:03: Allocating resources
[ 1297.505796] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.505878] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.505997] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.506089] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.511491] done.
[ 1297.513787] pci_bus 0000:01: Allocating resources
[ 1297.513804] pci_bus 0000:02: Allocating resources
[ 1297.513819] pci_bus 0000:03: Allocating resources
[ 1297.513831] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.522419] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1297.526583] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.526647] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.526743] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.526861] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.526880] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.526895] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.529982] acpi PNP0401:00: Already enumerated
[ 1297.530347] acpi PNP0501:00: Still not present
[ 1297.530478] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1297.547638] bbswitch: disabling discrete graphics
[ 1297.547647] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1297.710632] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1297.780162] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 1297.780350] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 1297.780519] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 1298.051600] ata2.00: configured for UDMA/133
[ 1298.173035] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 1298.260066] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 1298.682361] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1299.254363] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input22
[ 1299.270646] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input21
[ 1816.862145] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 1816.877902] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1816.878164] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1816.939393] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1816.939984] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1816.965134] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1820.692997] wlan0: authenticate with 4c:ac:0a:70:e2:cf
[ 1820.704968] wlan0: send auth to 4c:ac:0a:70:e2:cf (try 1/3)
[ 1820.707964] wlan0: authenticated
[ 1820.708107] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1820.708111] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1820.711491] wlan0: associate with 4c:ac:0a:70:e2:cf (try 1/3)
[ 1820.715090] wlan0: RX AssocResp from 4c:ac:0a:70:e2:cf (capab=0x411 status=0 aid=2)
[ 1820.718633] wlan0: associated
[ 1820.718661] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1820.797021] wlan0: deauthenticating from 4c:ac:0a:70:e2:cf by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 1820.817089] wlan0: authenticate with 4c:ac:0a:70:e2:cf
[ 1820.824613] wlan0: send auth to 4c:ac:0a:70:e2:cf (try 1/3)
[ 1820.831640] wlan0: authenticated
[ 1820.831745] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1820.831747] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1820.835552] wlan0: associate with 4c:ac:0a:70:e2:cf (try 1/3)
[ 1820.842381] wlan0: RX AssocResp from 4c:ac:0a:70:e2:cf (capab=0x411 status=0 aid=2)
[ 1820.845319] wlan0: associated
[ 4907.191329] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4907.191516] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4907.191701] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4907.191883] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4907.674415] e1000e: eth0 NIC Link is Down
[ 4907.690800] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4907.876371] wlan0: deauthenticating from 4c:ac:0a:70:e2:cf by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4908.862879] PM: Syncing filesystems ... done.
[ 4908.980109] PM: Preparing system for sleep (mem)
[ 4908.980550] bbswitch: enabling discrete graphics
[ 4909.106929] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4909.108610] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4909.109736] PM: Suspending system (mem)
[ 4909.109748] Suspending console(s) (use no_console_suspend to debug)
[ 4909.109991] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4909.110822] sd 1:0:0:0: [sda] Stopping disk
[ 4909.116553] e1000e: EEE TX LPI TIMER: 00000011
[ 4909.686325] PM: suspend of devices complete after 576.757 msecs
[ 4909.706376] PM: late suspend of devices complete after 20.058 msecs
[ 4909.706917] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4909.707137] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 4909.707198] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4909.724311] PM: noirq suspend of devices complete after 17.943 msecs
[ 4909.724533] ACPI: Preparing to enter system sleep state S3
[ 4909.746436] ACPI : EC: EC stopped
[ 4909.746436] PM: Saving platform NVS memory
[ 4909.746451] Disabling non-boot CPUs ...
[ 4909.747621] smpboot: CPU 1 is now offline
[ 4909.763653] smpboot: CPU 2 is now offline
[ 4909.778550] Broke affinity for irq 21
[ 4909.778553] Broke affinity for irq 42
[ 4909.778554] Broke affinity for irq 43
[ 4909.778556] Broke affinity for irq 44
[ 4909.778559] Broke affinity for irq 46
[ 4909.779570] smpboot: CPU 3 is now offline
[ 4909.795510] ACPI: Low-level resume complete
[ 4909.795562] ACPI : EC: EC started
[ 4909.795563] PM: Restoring platform NVS memory
[ 4909.795951] Enabling non-boot CPUs ...
[ 4909.795987] x86: Booting SMP configuration:
[ 4909.795988] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4909.807853]  cache: parent cpu1 should not be sleeping
[ 4909.807966] CPU1 is up
[ 4909.807983] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4909.819890]  cache: parent cpu2 should not be sleeping
[ 4909.820005] CPU2 is up
[ 4909.820025] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4909.831841]  cache: parent cpu3 should not be sleeping
[ 4909.831914] CPU3 is up
[ 4909.834901] ACPI: Waking up from system sleep state S3
[ 4910.247705] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4910.292429] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4910.292475] PM: noirq resume of devices complete after 60.983 msecs
[ 4910.298776] PM: early resume of devices complete after 6.288 msecs
[ 4910.300641] sd 1:0:0:0: [sda] Starting disk
[ 4910.301185] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 4910.301929] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 4910.527315] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[ 4910.627208] ata1: SATA link down (SStatus 0 SControl 300)
[ 4910.691202] usb 3-1.6: reset high-speed USB device number 4 using ehci-pci
[ 4910.857268] PM: resume of devices complete after 558.800 msecs
[ 4910.857751] PM: Finishing wakeup.
[ 4910.857753] Restarting tasks ... done.
[ 4910.864914] pci_bus 0000:01: Allocating resources
[ 4910.864931] pci_bus 0000:02: Allocating resources
[ 4910.864946] pci_bus 0000:03: Allocating resources
[ 4910.864958] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.865300] pci_bus 0000:01: Allocating resources
[ 4910.865314] pci_bus 0000:02: Allocating resources
[ 4910.865328] pci_bus 0000:03: Allocating resources
[ 4910.865338] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.867387] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.867520] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.870558] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.870772] pci_bus 0000:01: Allocating resources
[ 4910.870785] pci_bus 0000:02: Allocating resources
[ 4910.870798] pci_bus 0000:03: Allocating resources
[ 4910.870806] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.872498] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 4910.872503] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 4910.881798] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.881839] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.881897] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.882007] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.882024] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.882041] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.882552] acpi PNP0401:00: Already enumerated
[ 4910.884671] acpi PNP0501:00: Still not present
[ 4910.884771] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4910.895581] bbswitch: disabling discrete graphics
[ 4910.895587] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 4910.960346] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4911.140396] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4911.140573] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4911.140754] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4911.140926] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 4911.350849] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4911.729239] ata2.00: configured for UDMA/133
[ 4912.266601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4912.267297] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4912.267455] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4912.328896] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4912.329419] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4912.350291] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4912.830282] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input26
[ 4912.842498] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input25
[ 4916.087233] wlan0: authenticate with 4c:ac:0a:70:e2:cf
[ 4916.096504] wlan0: send auth to 4c:ac:0a:70:e2:cf (try 1/3)
[ 4916.099353] wlan0: authenticated
[ 4916.099477] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4916.099481] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4916.100171] wlan0: associate with 4c:ac:0a:70:e2:cf (try 1/3)
[ 4916.104761] wlan0: RX AssocResp from 4c:ac:0a:70:e2:cf (capab=0x411 status=0 aid=2)
[ 4916.109537] wlan0: associated
[ 4916.109566] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4916.166974] wlan0: deauthenticating from 4c:ac:0a:70:e2:cf by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 4916.182437] wlan0: authenticate with 4c:ac:0a:70:e2:cf
[ 4916.189352] wlan0: send auth to 4c:ac:0a:70:e2:cf (try 1/3)
[ 4916.195081] wlan0: authenticated
[ 4916.195249] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4916.195252] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4916.196137] wlan0: associate with 4c:ac:0a:70:e2:cf (try 1/3)
[ 4916.198689] wlan0: RX AssocResp from 4c:ac:0a:70:e2:cf (capab=0x411 status=0 aid=2)
[ 4916.213600] wlan0: associated