2015-11-07 08:57:32 |
Peter Saunderson |
bug |
|
|
added bug |
2015-11-07 09:00:07 |
Brad Figg |
linux (Ubuntu): status |
New |
Incomplete |
|
2015-11-07 14:29:32 |
Peter Saunderson |
tags |
|
apport-collected wily |
|
2015-11-07 14:29:33 |
Peter Saunderson |
description |
I have just upgraded to Ubuntu 15.10 and almost immediately my CPU fan started speeding and slowing without good reason even when the PC is idle.
I tried various things but then found that if I leave the computer off for a long time and let everything cool down then when I boot from cold the CPU fan is stable.
To test my theory of cold start out I then ran
sudo cpupower frequency-set -g powersave
followed by
sudo cpupower frequency-set -g ondemand
The final mode is the initial mode. Almost immediately as soon as I moved to powersave mode the erratic fan speed started. It did not stop when I returned to ondemand.
Temp fix for this behaviour is - go and have a cup of coffee and let the computer cool down when you restart: shutdown then start from cold.
$ uname -a
Linux HomeMegaUbuntu 4.2.0-17-generic #21-Ubuntu SMP Fri Oct 23 19:56:16 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 15.10
Release: 15.10
Codename: wily
$ cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.80 GHz
available frequency steps: 2.80 GHz, 2.80 GHz, 2.67 GHz, 2.53 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.20 GHz and 2.80 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
cpufreq stats: 2.80 GHz:11.93%, 2.80 GHz:0.00%, 2.67 GHz:0.40%, 2.53 GHz:0.44%, 2.40 GHz:0.51%, 2.27 GHz:0.55%, 2.13 GHz:0.35%, 2.00 GHz:0.72%, 1.87 GHz:0.84%, 1.73 GHz:1.00%, 1.60 GHz:2.16%, 1.47 GHz:4.61%, 1.33 GHz:16.83%, 1.20 GHz:59.65% (29241)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
[ 0.000000] BIOS-e820: [mem 0x00000000bd780000-0x00000000bd78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd78e000-0x00000000bd7cffff] ACPI NVS
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9B40 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000BD780100 00006C (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BD780290 0000F4 (v04 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20150619/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x00000000BD780660 005B02 (v02 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: APIC 0x00000000BD780390 00008C (v02 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BD780420 00003C (v01 DELL OEMMCFG 20101113 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BD780460 000176 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BD7805E0 000080 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BD78E040 000072 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BD78A660 000038 (v01 DELL OEMHPET 20101113 MSFT 00000097)
[ 0.000000] ACPI: ASF! 0x00000000BD78A6A0 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BD78F800 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000048] ACPI: Core revision 20150619
[ 0.004019] ACPI: All ACPI Tables successfully acquired
[ 0.206757] PM: Registering ACPI NVS region [mem 0xbd78e000-0xbd7cffff] (270336 bytes)
[ 0.217768] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.217775] ACPI: bus type PCI registered
[ 0.217780] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.222002] ACPI: Added _OSI(Module Device)
[ 0.222007] ACPI: Added _OSI(Processor Device)
[ 0.222011] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222016] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223412] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224917] ACPI: Dynamic OEM Table Load:
[ 0.224929] ACPI: SSDT 0xFFFF8802370FE000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.225251] ACPI: Dynamic OEM Table Load:
[ 0.225259] ACPI: SSDT 0xFFFF880235D62000 0004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.225623] ACPI: Interpreter enabled
[ 0.225631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.225641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.225659] ACPI: (supports S0 S3 S4 S5)
[ 0.225663] ACPI: Using IOAPIC for interrupt routing
[ 0.226463] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.226492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.232079] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.232944] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.233219] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.233355] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.233524] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.233628] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.250257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.250305] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.250348] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.250394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.250440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250538] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.250584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.250633] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.251003] ACPI: bus type USB registered
[ 0.251169] PCI: Using ACPI for IRQ routing
[ 0.256895] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.265257] pnp: PnP ACPI init
[ 0.265351] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265407] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265587] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265738] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265823] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265919] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265982] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266159] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.266252] pnp: PnP ACPI: found 8 devices
[ 1.168433] ACPI: Power Button [PWRB]
[ 1.170665] ACPI: Power Button [PWRF]
[ 21.995925] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150619/utaddress-254)
[ 21.995931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
I have just upgraded to Ubuntu 15.10 and almost immediately my CPU fan started speeding and slowing without good reason even when the PC is idle.
I tried various things but then found that if I leave the computer off for a long time and let everything cool down then when I boot from cold the CPU fan is stable.
To test my theory of cold start out I then ran
sudo cpupower frequency-set -g powersave
followed by
sudo cpupower frequency-set -g ondemand
The final mode is the initial mode. Almost immediately as soon as I moved to powersave mode the erratic fan speed started. It did not stop when I returned to ondemand.
Temp fix for this behaviour is - go and have a cup of coffee and let the computer cool down when you restart: shutdown then start from cold.
$ uname -a
Linux HomeMegaUbuntu 4.2.0-17-generic #21-Ubuntu SMP Fri Oct 23 19:56:16 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 15.10
Release: 15.10
Codename: wily
$ cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.80 GHz
available frequency steps: 2.80 GHz, 2.80 GHz, 2.67 GHz, 2.53 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.20 GHz and 2.80 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
cpufreq stats: 2.80 GHz:11.93%, 2.80 GHz:0.00%, 2.67 GHz:0.40%, 2.53 GHz:0.44%, 2.40 GHz:0.51%, 2.27 GHz:0.55%, 2.13 GHz:0.35%, 2.00 GHz:0.72%, 1.87 GHz:0.84%, 1.73 GHz:1.00%, 1.60 GHz:2.16%, 1.47 GHz:4.61%, 1.33 GHz:16.83%, 1.20 GHz:59.65% (29241)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
[ 0.000000] BIOS-e820: [mem 0x00000000bd780000-0x00000000bd78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd78e000-0x00000000bd7cffff] ACPI NVS
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9B40 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000BD780100 00006C (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BD780290 0000F4 (v04 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20150619/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x00000000BD780660 005B02 (v02 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: APIC 0x00000000BD780390 00008C (v02 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BD780420 00003C (v01 DELL OEMMCFG 20101113 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BD780460 000176 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BD7805E0 000080 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BD78E040 000072 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BD78A660 000038 (v01 DELL OEMHPET 20101113 MSFT 00000097)
[ 0.000000] ACPI: ASF! 0x00000000BD78A6A0 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BD78F800 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000048] ACPI: Core revision 20150619
[ 0.004019] ACPI: All ACPI Tables successfully acquired
[ 0.206757] PM: Registering ACPI NVS region [mem 0xbd78e000-0xbd7cffff] (270336 bytes)
[ 0.217768] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.217775] ACPI: bus type PCI registered
[ 0.217780] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.222002] ACPI: Added _OSI(Module Device)
[ 0.222007] ACPI: Added _OSI(Processor Device)
[ 0.222011] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222016] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223412] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224917] ACPI: Dynamic OEM Table Load:
[ 0.224929] ACPI: SSDT 0xFFFF8802370FE000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.225251] ACPI: Dynamic OEM Table Load:
[ 0.225259] ACPI: SSDT 0xFFFF880235D62000 0004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.225623] ACPI: Interpreter enabled
[ 0.225631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.225641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.225659] ACPI: (supports S0 S3 S4 S5)
[ 0.225663] ACPI: Using IOAPIC for interrupt routing
[ 0.226463] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.226492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.232079] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.232944] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.233219] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.233355] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.233524] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.233628] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.250257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.250305] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.250348] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.250394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.250440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250538] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.250584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.250633] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.251003] ACPI: bus type USB registered
[ 0.251169] PCI: Using ACPI for IRQ routing
[ 0.256895] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.265257] pnp: PnP ACPI init
[ 0.265351] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265407] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265587] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265738] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265823] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265919] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265982] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266159] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.266252] pnp: PnP ACPI: found 8 devices
[ 1.168433] ACPI: Power Button [PWRB]
[ 1.170665] ACPI: Power Button [PWRF]
[ 21.995925] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150619/utaddress-254)
[ 21.995931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
---
ApportVersion: 2.19.1-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pas 2076 F.... pulseaudio
/dev/snd/controlC1: pas 2076 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=68ce068c-1889-4f00-9b8a-12d7dc64348b
InstallationDate: Installed on 2011-02-22 (1718 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
MachineType: Dell Inc. Inspiron 580
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-17-generic root=UUID=bf510382-4d2b-49d6-b9d9-ac6e3f6334eb ro intel_pstate=enable
ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-17-generic N/A
linux-backports-modules-4.2.0-17-generic N/A
linux-firmware 1.149.1
RfKill:
Tags: wily
Uname: Linux 4.2.0-17-generic x86_64
UpgradeStatus: Upgraded to wily on 2015-11-06 (0 days ago)
UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare vboxusers wireshark
_MarkForUpload: True
dmi.bios.date: 11/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.name: 0C2KJT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA07:bd11/13/2010:svnDellInc.:pnInspiron580:pvr:rvnDellInc.:rn0C2KJT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Inspiron 580
dmi.sys.vendor: Dell Inc. |
|
2015-11-07 14:29:34 |
Peter Saunderson |
attachment added |
|
AlsaInfo.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514751/+files/AlsaInfo.txt |
|
2015-11-07 14:29:35 |
Peter Saunderson |
attachment added |
|
CRDA.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514752/+files/CRDA.txt |
|
2015-11-07 14:29:36 |
Peter Saunderson |
attachment added |
|
CurrentDmesg.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514753/+files/CurrentDmesg.txt |
|
2015-11-07 14:29:38 |
Peter Saunderson |
attachment added |
|
JournalErrors.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514754/+files/JournalErrors.txt |
|
2015-11-07 14:29:39 |
Peter Saunderson |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514755/+files/Lspci.txt |
|
2015-11-07 14:29:40 |
Peter Saunderson |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514756/+files/Lsusb.txt |
|
2015-11-07 14:29:41 |
Peter Saunderson |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514757/+files/ProcCpuinfo.txt |
|
2015-11-07 14:29:42 |
Peter Saunderson |
attachment added |
|
ProcEnviron.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514758/+files/ProcEnviron.txt |
|
2015-11-07 14:29:43 |
Peter Saunderson |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514759/+files/ProcInterrupts.txt |
|
2015-11-07 14:29:44 |
Peter Saunderson |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514760/+files/ProcModules.txt |
|
2015-11-07 14:29:45 |
Peter Saunderson |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514761/+files/PulseList.txt |
|
2015-11-07 14:29:48 |
Peter Saunderson |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514762/+files/UdevDb.txt |
|
2015-11-07 14:29:51 |
Peter Saunderson |
attachment added |
|
UdevLog.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514763/+files/UdevLog.txt |
|
2015-11-07 14:29:53 |
Peter Saunderson |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/1514052/+attachment/4514764/+files/WifiSyslog.txt |
|
2015-11-07 14:30:53 |
Peter Saunderson |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
2015-11-08 12:23:19 |
Benjamin |
bug watch added |
|
http://bugzilla.kernel.org/show_bug.cgi?id=100121 |
|
2015-11-08 16:01:38 |
Peter Saunderson |
attachment added |
|
dmidecode.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514052/+attachment/4515169/+files/dmidecode.txt |
|
2015-11-09 16:57:14 |
Joseph Salisbury |
linux (Ubuntu): importance |
Undecided |
Medium |
|
2015-11-09 16:59:02 |
Joseph Salisbury |
tags |
apport-collected wily |
apport-collected kernel-da-key wily |
|
2015-11-09 16:59:12 |
Joseph Salisbury |
linux (Ubuntu): importance |
Medium |
High |
|
2015-11-09 16:59:16 |
Joseph Salisbury |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
2015-11-12 18:53:14 |
Benjamin |
tags |
apport-collected kernel-da-key wily |
apport-collected kernel-bug-exists-upstream kernel-da-key wily |
|
2015-11-12 18:53:24 |
Benjamin |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
2015-11-13 01:58:38 |
penalvch |
tags |
apport-collected kernel-bug-exists-upstream kernel-da-key wily |
apport-collected kernel-bug-exists-upstream kernel-da-key latest-bios-a07 wily |
|
2015-11-13 02:01:11 |
penalvch |
tags |
apport-collected kernel-bug-exists-upstream kernel-da-key latest-bios-a07 wily |
apport-collected kernel-bug-exists-upstream kernel-da-key latest-bios-a07 needs-bisect regression-release wily |
|
2015-11-13 02:01:38 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
2015-11-13 14:47:50 |
Lorenzo Bettini |
bug |
|
|
added subscriber Lorenzo Bettini |
2015-11-14 08:24:18 |
Miguel Barrio Orsikowsky |
bug |
|
|
added subscriber Miguel Barrio Orsikowsky |
2015-11-15 16:03:14 |
Paco Orozco |
bug |
|
|
added subscriber Paco Orozco |
2015-11-21 19:33:20 |
Yuriy Vidineev |
bug |
|
|
added subscriber Yuriy Vidineev |
2015-11-29 19:14:16 |
penalvch |
tags |
apport-collected kernel-bug-exists-upstream kernel-da-key latest-bios-a07 needs-bisect regression-release wily |
apport-collected bisect-done kernel-bug-exists-upstream kernel-da-key latest-bios-a07 regression-release wily |
|
2015-11-29 19:17:14 |
penalvch |
tags |
apport-collected bisect-done kernel-bug-exists-upstream kernel-da-key latest-bios-a07 regression-release wily |
apport-collected bisect-done kernel-bug-exists-upstream kernel-bug-exists-upstream-4.3 kernel-da-key latest-bios-a07 regression-release wily |
|
2015-11-29 19:20:30 |
penalvch |
attachment added |
|
dmesg https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514052/+attachment/4527212/+files/dmesg |
|
2015-11-29 19:20:55 |
penalvch |
description |
I have just upgraded to Ubuntu 15.10 and almost immediately my CPU fan started speeding and slowing without good reason even when the PC is idle.
I tried various things but then found that if I leave the computer off for a long time and let everything cool down then when I boot from cold the CPU fan is stable.
To test my theory of cold start out I then ran
sudo cpupower frequency-set -g powersave
followed by
sudo cpupower frequency-set -g ondemand
The final mode is the initial mode. Almost immediately as soon as I moved to powersave mode the erratic fan speed started. It did not stop when I returned to ondemand.
Temp fix for this behaviour is - go and have a cup of coffee and let the computer cool down when you restart: shutdown then start from cold.
$ uname -a
Linux HomeMegaUbuntu 4.2.0-17-generic #21-Ubuntu SMP Fri Oct 23 19:56:16 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 15.10
Release: 15.10
Codename: wily
$ cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.80 GHz
available frequency steps: 2.80 GHz, 2.80 GHz, 2.67 GHz, 2.53 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.20 GHz and 2.80 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
cpufreq stats: 2.80 GHz:11.93%, 2.80 GHz:0.00%, 2.67 GHz:0.40%, 2.53 GHz:0.44%, 2.40 GHz:0.51%, 2.27 GHz:0.55%, 2.13 GHz:0.35%, 2.00 GHz:0.72%, 1.87 GHz:0.84%, 1.73 GHz:1.00%, 1.60 GHz:2.16%, 1.47 GHz:4.61%, 1.33 GHz:16.83%, 1.20 GHz:59.65% (29241)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
[ 0.000000] BIOS-e820: [mem 0x00000000bd780000-0x00000000bd78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd78e000-0x00000000bd7cffff] ACPI NVS
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9B40 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000BD780100 00006C (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BD780290 0000F4 (v04 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20150619/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x00000000BD780660 005B02 (v02 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: FACS 0x00000000BD78E000 000040
[ 0.000000] ACPI: APIC 0x00000000BD780390 00008C (v02 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BD780420 00003C (v01 DELL OEMMCFG 20101113 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BD780460 000176 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BD7805E0 000080 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BD78E040 000072 (v01 DELL FX09 20101113 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BD78A660 000038 (v01 DELL OEMHPET 20101113 MSFT 00000097)
[ 0.000000] ACPI: ASF! 0x00000000BD78A6A0 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BD78F800 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000048] ACPI: Core revision 20150619
[ 0.004019] ACPI: All ACPI Tables successfully acquired
[ 0.206757] PM: Registering ACPI NVS region [mem 0xbd78e000-0xbd7cffff] (270336 bytes)
[ 0.217768] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.217775] ACPI: bus type PCI registered
[ 0.217780] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.222002] ACPI: Added _OSI(Module Device)
[ 0.222007] ACPI: Added _OSI(Processor Device)
[ 0.222011] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222016] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223412] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224917] ACPI: Dynamic OEM Table Load:
[ 0.224929] ACPI: SSDT 0xFFFF8802370FE000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.225251] ACPI: Dynamic OEM Table Load:
[ 0.225259] ACPI: SSDT 0xFFFF880235D62000 0004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.225623] ACPI: Interpreter enabled
[ 0.225631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.225641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.225659] ACPI: (supports S0 S3 S4 S5)
[ 0.225663] ACPI: Using IOAPIC for interrupt routing
[ 0.226463] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.226492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.232079] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.232944] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.233219] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.233355] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.233524] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.233628] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.250257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.250305] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.250348] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.250394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.250440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.250538] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.250584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.250633] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.251003] ACPI: bus type USB registered
[ 0.251169] PCI: Using ACPI for IRQ routing
[ 0.256895] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.265257] pnp: PnP ACPI init
[ 0.265351] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265407] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265587] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265738] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265823] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265919] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265982] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266159] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.266252] pnp: PnP ACPI: found 8 devices
[ 1.168433] ACPI: Power Button [PWRB]
[ 1.170665] ACPI: Power Button [PWRF]
[ 21.995925] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150619/utaddress-254)
[ 21.995931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
---
ApportVersion: 2.19.1-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pas 2076 F.... pulseaudio
/dev/snd/controlC1: pas 2076 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=68ce068c-1889-4f00-9b8a-12d7dc64348b
InstallationDate: Installed on 2011-02-22 (1718 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
MachineType: Dell Inc. Inspiron 580
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-17-generic root=UUID=bf510382-4d2b-49d6-b9d9-ac6e3f6334eb ro intel_pstate=enable
ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-17-generic N/A
linux-backports-modules-4.2.0-17-generic N/A
linux-firmware 1.149.1
RfKill:
Tags: wily
Uname: Linux 4.2.0-17-generic x86_64
UpgradeStatus: Upgraded to wily on 2015-11-06 (0 days ago)
UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare vboxusers wireshark
_MarkForUpload: True
dmi.bios.date: 11/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.name: 0C2KJT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA07:bd11/13/2010:svnDellInc.:pnInspiron580:pvr:rvnDellInc.:rn0C2KJT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Inspiron 580
dmi.sys.vendor: Dell Inc. |
I have just upgraded to Ubuntu 15.10 and almost immediately my CPU fan started speeding and slowing without good reason even when the PC is idle.
I tried various things but then found that if I leave the computer off for a long time and let everything cool down then when I boot from cold the CPU fan is stable.
To test my theory of cold start out I then ran
sudo cpupower frequency-set -g powersave
followed by
sudo cpupower frequency-set -g ondemand
The final mode is the initial mode. Almost immediately as soon as I moved to powersave mode the erratic fan speed started. It did not stop when I returned to ondemand.
Temp fix for this behaviour is - go and have a cup of coffee and let the computer cool down when you restart: shutdown then start from cold.
$ cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.80 GHz
available frequency steps: 2.80 GHz, 2.80 GHz, 2.67 GHz, 2.53 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.20 GHz and 2.80 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
cpufreq stats: 2.80 GHz:11.93%, 2.80 GHz:0.00%, 2.67 GHz:0.40%, 2.53 GHz:0.44%, 2.40 GHz:0.51%, 2.27 GHz:0.55%, 2.13 GHz:0.35%, 2.00 GHz:0.72%, 1.87 GHz:0.84%, 1.73 GHz:1.00%, 1.60 GHz:2.16%, 1.47 GHz:4.61%, 1.33 GHz:16.83%, 1.20 GHz:59.65% (29241)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514052/+attachment/4527212/+files/dmesg
---
ApportVersion: 2.19.1-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pas 2076 F.... pulseaudio
/dev/snd/controlC1: pas 2076 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=68ce068c-1889-4f00-9b8a-12d7dc64348b
InstallationDate: Installed on 2011-02-22 (1718 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
MachineType: Dell Inc. Inspiron 580
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-17-generic root=UUID=bf510382-4d2b-49d6-b9d9-ac6e3f6334eb ro intel_pstate=enable
ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-17-generic N/A
linux-backports-modules-4.2.0-17-generic N/A
linux-firmware 1.149.1
RfKill:
Tags: wily
Uname: Linux 4.2.0-17-generic x86_64
UpgradeStatus: Upgraded to wily on 2015-11-06 (0 days ago)
UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare vboxusers wireshark
_MarkForUpload: True
dmi.bios.date: 11/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.name: 0C2KJT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA07:bd11/13/2010:svnDellInc.:pnInspiron580:pvr:rvnDellInc.:rn0C2KJT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Inspiron 580
dmi.sys.vendor: Dell Inc. |
|
2015-11-29 19:47:27 |
penalvch |
description |
I have just upgraded to Ubuntu 15.10 and almost immediately my CPU fan started speeding and slowing without good reason even when the PC is idle.
I tried various things but then found that if I leave the computer off for a long time and let everything cool down then when I boot from cold the CPU fan is stable.
To test my theory of cold start out I then ran
sudo cpupower frequency-set -g powersave
followed by
sudo cpupower frequency-set -g ondemand
The final mode is the initial mode. Almost immediately as soon as I moved to powersave mode the erratic fan speed started. It did not stop when I returned to ondemand.
Temp fix for this behaviour is - go and have a cup of coffee and let the computer cool down when you restart: shutdown then start from cold.
$ cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.80 GHz
available frequency steps: 2.80 GHz, 2.80 GHz, 2.67 GHz, 2.53 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.20 GHz and 2.80 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
cpufreq stats: 2.80 GHz:11.93%, 2.80 GHz:0.00%, 2.67 GHz:0.40%, 2.53 GHz:0.44%, 2.40 GHz:0.51%, 2.27 GHz:0.55%, 2.13 GHz:0.35%, 2.00 GHz:0.72%, 1.87 GHz:0.84%, 1.73 GHz:1.00%, 1.60 GHz:2.16%, 1.47 GHz:4.61%, 1.33 GHz:16.83%, 1.20 GHz:59.65% (29241)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514052/+attachment/4527212/+files/dmesg
---
ApportVersion: 2.19.1-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pas 2076 F.... pulseaudio
/dev/snd/controlC1: pas 2076 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=68ce068c-1889-4f00-9b8a-12d7dc64348b
InstallationDate: Installed on 2011-02-22 (1718 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
MachineType: Dell Inc. Inspiron 580
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-17-generic root=UUID=bf510382-4d2b-49d6-b9d9-ac6e3f6334eb ro intel_pstate=enable
ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-17-generic N/A
linux-backports-modules-4.2.0-17-generic N/A
linux-firmware 1.149.1
RfKill:
Tags: wily
Uname: Linux 4.2.0-17-generic x86_64
UpgradeStatus: Upgraded to wily on 2015-11-06 (0 days ago)
UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare vboxusers wireshark
_MarkForUpload: True
dmi.bios.date: 11/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.name: 0C2KJT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA07:bd11/13/2010:svnDellInc.:pnInspiron580:pvr:rvnDellInc.:rn0C2KJT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Inspiron 580
dmi.sys.vendor: Dell Inc. |
After upgrading to Ubuntu 15.10 my CPU fan started speeding and slowing without good reason even when the PC is idle.
This has been bisected to commit f989e55452c74b4f7b22c889b8ec9f1192aaeec4 :
i8k: Add support for fan labels
This patch adds labels support for fans if SMM function with EAX register
0x03a3 reports it. This information was taken from DOS binary NBSVC.MDM.
Additionally this patch change detection of fan presece. Instead reading fan
status now detection is based on new label SMM function. Dell DOS binary
NBSVC.MDM is doing similar checks, so we should do that too.
This patch also remove I8K_FAN_LEFT and I8K_FAN_RIGHT usage from hwmon driver
part because that names does not make sense anymore. So numeric constants are
used instead. Original /proc/i8k ioctl part was not changed for compatibility
reasons.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WORKAROUND: Shutdown. After it cools down for a while, turn it on.
Tried intel_pstate but it is not supported for some reason on my machine ie the following does not work and I am left with driver: acpi-cpufreq
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=enable"
Could not see ACPI Thermal Zones reported in dmesg
$ dmesg | grep ACPI
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514052/+attachment/4527212/+files/dmesg
---
ApportVersion: 2.19.1-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pas 2076 F.... pulseaudio
/dev/snd/controlC1: pas 2076 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=68ce068c-1889-4f00-9b8a-12d7dc64348b
InstallationDate: Installed on 2011-02-22 (1718 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
IwConfig:
eth0 no wireless extensions.
lo no wireless extensions.
MachineType: Dell Inc. Inspiron 580
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-17-generic root=UUID=bf510382-4d2b-49d6-b9d9-ac6e3f6334eb ro intel_pstate=enable
ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-17-generic N/A
linux-backports-modules-4.2.0-17-generic N/A
linux-firmware 1.149.1
RfKill:
Tags: wily
Uname: Linux 4.2.0-17-generic x86_64
UpgradeStatus: Upgraded to wily on 2015-11-06 (0 days ago)
UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare vboxusers wireshark
_MarkForUpload: True
dmi.bios.date: 11/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.name: 0C2KJT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA07:bd11/13/2010:svnDellInc.:pnInspiron580:pvr:rvnDellInc.:rn0C2KJT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: Inspiron 580
dmi.sys.vendor: Dell Inc. |
|
2015-12-01 00:14:03 |
penalvch |
tags |
apport-collected bisect-done kernel-bug-exists-upstream kernel-bug-exists-upstream-4.3 kernel-da-key latest-bios-a07 regression-release wily |
apport-collected bisect-done kernel-bug-exists-upstream kernel-bug-exists-upstream-4.4-rc3 kernel-da-key latest-bios-a07 regression-release wily |
|
2015-12-01 00:17:38 |
penalvch |
linux (Ubuntu): status |
Incomplete |
Triaged |
|