[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-15-generic (buildd@tipua) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:01 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fee3000-0x000000003feeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003fef0000-0x000000003fefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: /P4M800CE-8237, BIOS 6.00 PG 06/08/2006 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3fee0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E0000000 mask FF8000000 write-combining [ 0.000000] 2 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] found SMP MP-table at [mem 0x000f3460-0x000f346f] mapped at [c00f3460] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff] [ 0.000000] [mem 0x20000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01c52000, 0x01c52fff] PGTABLE [ 0.000000] BRK [0x01c53000, 0x01c53fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35906000-0x36c7afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000F75F0 000014 (v00 P4M80P) [ 0.000000] ACPI: RSDT 0x3FEE3040 00002C (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x3FEE30C0 000074 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0x3FEE3180 004ED8 (v01 P4M80P AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x3FEE0000 000040 [ 0.000000] ACPI: APIC 0x3FEE80C0 000068 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 130MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3fedffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3fedffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x3fedffff] [ 0.000000] On node 0 totalpages: 261758 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 33506 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x3ff00000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f71b5000 s40320 r0 d29312 u69632 [ 0.000000] pcpu-alloc: s40320 r0 d29312 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259528 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic root=UUID=aeb60d7d-97ea-48e8-9dca-5f024edccd81 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fee0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1003080K/1047032K available (7108K kernel code, 709K rwdata, 2996K rodata, 888K init, 796K bss, 43952K reserved, 0K cma-reserved, 134024K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1a93000 - 0xc1b71000 ( 888 kB) .data : 0xc16f16b6 - 0xc1a91780 (3712 kB) .text : 0xc1000000 - 0xc16f16b6 (7109 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f5434000 soft=f5436000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2505.576 MHz processor [ 0.008029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5011.15 BogoMIPS (lpj=10022304) [ 0.008038] pid_max: default: 32768 minimum: 301 [ 0.008065] ACPI: Core revision 20141107 [ 0.018894] ACPI: All ACPI Tables successfully acquired [ 0.020132] Security Framework initialized [ 0.020182] AppArmor: AppArmor initialized [ 0.020189] Yama: becoming mindful. [ 0.020296] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.020303] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.020908] Initializing cgroup subsys memory [ 0.020936] Initializing cgroup subsys devices [ 0.020944] Initializing cgroup subsys freezer [ 0.020952] Initializing cgroup subsys net_cls [ 0.020958] Initializing cgroup subsys blkio [ 0.020965] Initializing cgroup subsys perf_event [ 0.020973] Initializing cgroup subsys net_prio [ 0.020980] Initializing cgroup subsys hugetlb [ 0.021058] Disabled fast string operations [ 0.021066] CPU0: Hyper-Threading is disabled [ 0.021076] mce: CPU supports 4 MCE banks [ 0.021098] CPU0: Thermal monitoring enabled (TM1) [ 0.021120] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.052808] ftrace: allocating 29374 entries in 58 pages [ 0.064268] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.065659] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105694] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.50GHz (fam: 0f, model: 02, stepping: 09) [ 0.108000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.108000] ... version: 0 [ 0.108000] ... bit width: 40 [ 0.108000] ... generic registers: 18 [ 0.108000] ... value mask: 000000ffffffffff [ 0.108000] ... max period: 0000007fffffffff [ 0.108000] ... fixed-purpose events: 0 [ 0.108000] ... event mask: 000000000003ffff [ 0.108000] x86: Booted up 1 node, 1 CPUs [ 0.108000] smpboot: Total of 1 processors activated (5011.15 BogoMIPS) [ 0.108000] devtmpfs: initialized [ 0.108256] evm: security.selinux [ 0.108263] evm: security.SMACK64 [ 0.108265] evm: security.SMACK64EXEC [ 0.108267] evm: security.SMACK64TRANSMUTE [ 0.108269] evm: security.SMACK64MMAP [ 0.108271] evm: security.ima [ 0.108273] evm: security.capability [ 0.108472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.108692] PM: Registering ACPI NVS region [mem 0x3fee0000-0x3fee2fff] (12288 bytes) [ 0.109215] pinctrl core: initialized pinctrl subsystem [ 0.109665] RTC time: 15:52:37, date: 09/14/15 [ 0.110012] NET: Registered protocol family 16 [ 0.110784] EISA bus registered [ 0.110802] cpuidle: using governor ladder [ 0.110807] cpuidle: using governor menu [ 0.111033] ACPI: bus type PCI registered [ 0.111042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.119884] PCI: PCI BIOS revision 2.10 entry at 0xf9f20, last bus=1 [ 0.119891] PCI: Using configuration type 1 for base access [ 0.126736] ACPI: Added _OSI(Module Device) [ 0.126744] ACPI: Added _OSI(Processor Device) [ 0.126747] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126750] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134792] ACPI: Interpreter enabled [ 0.134832] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.134845] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580) [ 0.134868] ACPI: (supports S0 S1 S4 S5) [ 0.134874] ACPI: Using IOAPIC for interrupt routing [ 0.134979] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.152914] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.152938] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.152955] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.153157] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.153165] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.153170] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.153173] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.153177] acpi PNP0A03:00: host bridge window [mem 0x3ff00000-0xfebfffff] (ignored) [ 0.153183] PCI: root bus 00: using default resources [ 0.153189] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.153630] PCI host bridge to bus 0000:00 [ 0.153644] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.153649] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.153655] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.153681] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000 [ 0.153701] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref] [ 0.154044] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000 [ 0.154346] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000 [ 0.154635] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000 [ 0.154933] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000 [ 0.155224] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000 [ 0.155530] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400 [ 0.155627] pci 0000:00:01.0: supports D1 [ 0.155888] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f [ 0.155923] pci 0000:00:0f.0: reg 0x10: [io 0xb000-0xb007] [ 0.155937] pci 0000:00:0f.0: reg 0x14: [io 0xb400-0xb403] [ 0.155951] pci 0000:00:0f.0: reg 0x18: [io 0xb800-0xb807] [ 0.155965] pci 0000:00:0f.0: reg 0x1c: [io 0xbc00-0xbc03] [ 0.155978] pci 0000:00:0f.0: reg 0x20: [io 0xc000-0xc00f] [ 0.156029] pci 0000:00:0f.0: reg 0x24: [io 0xc400-0xc4ff] [ 0.156359] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.156434] pci 0000:00:0f.1: reg 0x20: [io 0xc800-0xc80f] [ 0.156463] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.156466] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.156470] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.156473] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.156791] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.156863] pci 0000:00:10.0: reg 0x20: [io 0xcc00-0xcc1f] [ 0.156940] pci 0000:00:10.0: supports D1 D2 [ 0.156946] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.157088] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.157260] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.157330] pci 0000:00:10.1: reg 0x20: [io 0xd000-0xd01f] [ 0.157408] pci 0000:00:10.1: supports D1 D2 [ 0.157413] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.157561] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.157724] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.157793] pci 0000:00:10.2: reg 0x20: [io 0xd400-0xd41f] [ 0.157871] pci 0000:00:10.2: supports D1 D2 [ 0.157877] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.158015] pci 0000:00:10.2: System wakeup disabled by ACPI [ 0.158188] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.158257] pci 0000:00:10.3: reg 0x20: [io 0xd800-0xd81f] [ 0.158335] pci 0000:00:10.3: supports D1 D2 [ 0.158340] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.158483] pci 0000:00:10.3: System wakeup disabled by ACPI [ 0.158667] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.158700] pci 0000:00:10.4: reg 0x10: [mem 0xeb000000-0xeb0000ff] [ 0.158816] pci 0000:00:10.4: supports D1 D2 [ 0.158822] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.158981] pci 0000:00:10.4: System wakeup disabled by ACPI [ 0.159162] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 [ 0.159267] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.159570] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.159604] pci 0000:00:11.5: reg 0x10: [io 0xdc00-0xdcff] [ 0.159724] pci 0000:00:11.5: supports D1 D2 [ 0.159862] pci 0000:00:11.5: System wakeup disabled by ACPI [ 0.160076] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 [ 0.160110] pci 0000:00:12.0: reg 0x10: [io 0xe400-0xe4ff] [ 0.160126] pci 0000:00:12.0: reg 0x14: [mem 0xeb001000-0xeb0010ff] [ 0.160239] pci 0000:00:12.0: supports D1 D2 [ 0.160243] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160389] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.160697] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000 [ 0.160729] pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xe8ffffff] [ 0.160743] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff pref] [ 0.160755] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe9ffffff] [ 0.160789] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.161033] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.161049] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xeaffffff] [ 0.161056] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 0.161076] pci_bus 0000:00: on NUMA node 0 [ 0.162317] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.162624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.162940] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 0.163204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.163443] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.163663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.163886] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.164169] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.164518] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.164808] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.165053] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.165341] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 0.167272] ACPI: Enabled 1 GPEs in block 00 to 0F [ 0.167753] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.167762] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.167766] vgaarb: loaded [ 0.167769] vgaarb: bridge control possible 0000:01:00.0 [ 0.169020] SCSI subsystem initialized [ 0.169240] libata version 3.00 loaded. [ 0.169392] ACPI: bus type USB registered [ 0.169496] usbcore: registered new interface driver usbfs [ 0.169545] usbcore: registered new interface driver hub [ 0.169630] usbcore: registered new device driver usb [ 0.170409] PCI: Using ACPI for IRQ routing [ 0.170426] PCI: pci_cache_line_size set to 64 bytes [ 0.170512] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.170519] e820: reserve RAM buffer [mem 0x3fee0000-0x3fffffff] [ 0.170967] NetLabel: Initializing [ 0.170975] NetLabel: domain hash size = 128 [ 0.170977] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.171010] NetLabel: unlabeled traffic allowed by default [ 0.171477] Switched to clocksource refined-jiffies [ 0.192214] AppArmor: AppArmor Filesystem Enabled [ 0.192484] pnp: PnP ACPI init [ 0.193059] system 00:00: [mem 0x000cee00-0x000cffff] has been reserved [ 0.193070] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.193077] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.193084] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.193089] system 00:00: [mem 0x3fee0000-0x3fefffff] could not be reserved [ 0.193095] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.193099] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.193103] system 00:00: [mem 0x00100000-0x3fedffff] could not be reserved [ 0.193108] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.193112] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.193116] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.193127] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.193397] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.193408] system 00:01: [io 0x0500-0x050f] has been reserved [ 0.193418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195076] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.195088] system 00:02: [io 0x0800-0x0805] has been reserved [ 0.195094] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.195106] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195285] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.195732] pnp 00:04: [dma 2] [ 0.195871] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.196613] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.197709] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.198069] pnp: PnP ACPI: found 7 devices [ 0.198090] PnPBIOS: Disabled by ACPI PNP [ 0.243658] Switched to clocksource acpi_pm [ 0.243732] pci 0000:01:00.0: BAR 6: assigned [mem 0xea000000-0xea01ffff pref] [ 0.243743] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.243755] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xeaffffff] [ 0.243762] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 0.243774] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.243778] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.243783] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xeaffffff] [ 0.243787] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref] [ 0.243865] NET: Registered protocol family 2 [ 0.243865] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.243865] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.243865] TCP: Hash tables configured (established 8192 bind 8192) [ 0.243865] TCP: reno registered [ 0.243865] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.243865] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.243865] NET: Registered protocol family 1 [ 0.243865] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.243865] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.243945] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.243981] pci 0000:01:00.0: Video device with shadowed ROM [ 0.243988] PCI: CLS 32 bytes, default 64 [ 0.244213] Trying to unpack rootfs image as initramfs... [ 1.051455] Freeing initrd memory: 19924K (f5906000 - f6c7b000) [ 1.051904] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e [ 1.052178] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.052322] Scanning for low memory corruption every 60 seconds [ 1.053393] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.053448] Initialise system trusted keyring [ 1.053542] audit: initializing netlink subsys (disabled) [ 1.053602] audit: type=2000 audit(1442245958.051:1): initialized [ 1.054441] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.060622] zpool: loaded [ 1.060632] zbud: loaded [ 1.060983] VFS: Disk quotas dquot_6.5.2 [ 1.061149] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.063189] fuse init (API version 7.23) [ 1.063928] Key type big_key registered [ 1.065698] Key type asymmetric registered [ 1.065708] Asymmetric key parser 'x509' registered [ 1.065756] bounce: pool size: 64 pages [ 1.065928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.066133] io scheduler noop registered [ 1.066143] io scheduler deadline registered (default) [ 1.066294] io scheduler cfq registered [ 1.066777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.066857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.067032] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.067038] vesafb: scrolling: redraw [ 1.067042] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.067088] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 3072k, total 3072k [ 1.067511] Console: switching to colour frame buffer device 128x48 [ 1.067550] fb0: VESA VGA frame buffer device [ 1.067920] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.067938] ACPI: Power Button [PWRB] [ 1.068241] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.068260] ACPI: Sleep Button [SLPB] [ 1.068473] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.068486] ACPI: Power Button [PWRF] [ 1.070284] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.070294] ACPI: Thermal Zone [THRM] (52 C) [ 1.070540] GHES: HEST is not enabled! [ 1.070663] isapnp: Scanning for PnP cards... [ 1.120460] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.141029] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.279938] Linux agpgart interface v0.103 [ 1.280333] agpgart: Detected VIA VT3314 chipset [ 1.291378] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.298387] brd: module loaded [ 1.302188] loop: module loaded [ 1.303252] libphy: Fixed MDIO Bus: probed [ 1.303267] tun: Universal TUN/TAP device driver, 1.6 [ 1.303269] tun: (C) 1999-2004 Max Krasnyansky [ 1.303502] PPP generic driver version 2.4.2 [ 1.303891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.303921] ehci-pci: EHCI PCI platform driver [ 1.304398] ehci-pci 0000:00:10.4: EHCI Host Controller [ 1.304434] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 1.304570] ehci-pci 0000:00:10.4: irq 21, io mem 0xeb000000 [ 1.348264] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 1.348536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.348543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.348547] usb usb1: Product: EHCI Host Controller [ 1.348551] usb usb1: Manufacturer: Linux 3.19.0-15-generic ehci_hcd [ 1.348554] usb usb1: SerialNumber: 0000:00:10.4 [ 1.349087] hub 1-0:1.0: USB hub found [ 1.349141] hub 1-0:1.0: 8 ports detected [ 1.349954] ehci-platform: EHCI generic platform driver [ 1.350017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.350048] ohci-pci: OHCI PCI platform driver [ 1.350124] ohci-platform: OHCI generic platform driver [ 1.350178] uhci_hcd: USB Universal Host Controller Interface driver [ 1.350530] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.350564] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.350593] uhci_hcd 0000:00:10.0: detected 2 ports [ 1.350631] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00 [ 1.350846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.350854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.350858] usb usb2: Product: UHCI Host Controller [ 1.350861] usb usb2: Manufacturer: Linux 3.19.0-15-generic uhci_hcd [ 1.350864] usb usb2: SerialNumber: 0000:00:10.0 [ 1.351388] hub 2-0:1.0: USB hub found [ 1.351441] hub 2-0:1.0: 2 ports detected [ 1.352229] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.352261] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.352281] uhci_hcd 0000:00:10.1: detected 2 ports [ 1.352322] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000 [ 1.396082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.396090] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.396094] usb usb3: Product: UHCI Host Controller [ 1.396098] usb usb3: Manufacturer: Linux 3.19.0-15-generic uhci_hcd [ 1.396101] usb usb3: SerialNumber: 0000:00:10.1 [ 1.396628] hub 3-0:1.0: USB hub found [ 1.396683] hub 3-0:1.0: 2 ports detected [ 1.397388] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.397433] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.397453] uhci_hcd 0000:00:10.2: detected 2 ports [ 1.397494] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 [ 1.397702] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.397710] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.397714] usb usb4: Product: UHCI Host Controller [ 1.397718] usb usb4: Manufacturer: Linux 3.19.0-15-generic uhci_hcd [ 1.397721] usb usb4: SerialNumber: 0000:00:10.2 [ 1.398248] hub 4-0:1.0: USB hub found [ 1.398302] hub 4-0:1.0: 2 ports detected [ 1.399008] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 1.399043] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 1.399064] uhci_hcd 0000:00:10.3: detected 2 ports [ 1.399106] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800 [ 1.399328] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.399336] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.399342] usb usb5: Product: UHCI Host Controller [ 1.399345] usb usb5: Manufacturer: Linux 3.19.0-15-generic uhci_hcd [ 1.399348] usb usb5: SerialNumber: 0000:00:10.3 [ 1.399876] hub 5-0:1.0: USB hub found [ 1.399932] hub 5-0:1.0: 2 ports detected [ 1.400604] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.444817] isapnp: No Plug & Play device found [ 1.652214] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.652670] mousedev: PS/2 mouse device common for all mice [ 1.653516] rtc_cmos 00:03: RTC can wake from S4 [ 1.653911] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.653993] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram [ 1.654046] i2c /dev entries driver [ 1.654254] device-mapper: uevent: version 1.0.3 [ 1.654621] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 1.654762] platform eisa.0: Probing EISA bus 0 [ 1.654823] platform eisa.0: EISA: Detected 0 cards [ 1.654871] cpufreq-nforce2: No nForce2 chipset. [ 1.654899] ledtrig-cpu: registered to indicate activity on CPUs [ 1.654919] PCCT header not found. [ 1.654921] ACPI PCC probe failed. [ 1.655174] TCP: cubic registered [ 1.655637] NET: Registered protocol family 10 [ 1.656694] NET: Registered protocol family 17 [ 1.656748] Key type dns_resolver registered [ 1.657317] Using IPI No-Shortcut mode [ 1.658049] Loading compiled-in X.509 certificates [ 1.664300] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.664790] Loaded X.509 cert 'Magrathea: Glacier signing key: 9b23c11a9a02c71e89328f2ab21d0a23af16d7ed' [ 1.664869] registered taskstats version 1 [ 1.675962] Key type trusted registered [ 1.697588] Key type encrypted registered [ 1.697617] AppArmor: AppArmor sha1 policy hashing enabled [ 1.697627] ima: No TPM chip found, activating TPM-bypass! [ 1.697705] evm: HMAC attrs: 0x1 [ 1.698471] Magic number: 15:1:892 [ 1.698624] bdi default: hash matches [ 1.698712] rtc_cmos 00:03: setting system clock to 2015-09-14 15:52:38 UTC (1442245958) [ 1.699010] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.699018] EDD information not available. [ 1.699205] PM: Hibernation image not present or could not be loaded. [ 1.700719] Freeing unused kernel memory: 888K (c1a93000 - c1b71000) [ 1.700889] Write protecting the kernel text: 7112k [ 1.701019] Write protecting the kernel read-only data: 3000k [ 1.759211] random: systemd-udevd urandom read with 0 bits of entropy available [ 1.922839] Floppy drive(s): fd0 is 1.44M [ 1.940141] FDC 0 is a post-1991 82077 [ 2.018277] usb 1-2: New USB device found, idVendor=046d, idProduct=0825 [ 2.018287] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.018291] usb 1-2: SerialNumber: 4578E550 [ 2.020488] pata_via 0000:00:0f.1: version 0.3.4 [ 2.020976] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 2.053294] scsi host0: pata_via [ 2.060205] scsi host1: pata_via [ 2.060462] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14 [ 2.060471] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15 [ 2.061206] sata_via 0000:00:0f.0: version 2.6 [ 2.061539] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 2.064113] tsc: Refined TSC clocksource calibration: 2505.681 MHz [ 2.067435] scsi host2: sata_via [ 2.071869] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 2.071880] via_rhine: Broken BIOS detected, avoid_D3 enabled [ 2.076146] scsi host3: sata_via [ 2.076411] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 20 [ 2.076421] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 20 [ 2.077273] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 2.092713] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xf8424000, 00:19:21:e1:e2:29, IRQ 23 [ 2.093480] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1 [ 2.224897] ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133 [ 2.224908] ata1.00: 160086528 sectors, multi 16: LBA [ 2.240517] usb 1-5: new high-speed USB device number 5 using ehci-pci [ 2.240680] ata1.00: configured for UDMA/133 [ 2.241078] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0 1BW0 PQ: 0 ANSI: 5 [ 2.242471] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 2.242884] sd 0:0:0:0: [sda] Write Protect is off [ 2.242895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.243073] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.243816] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.256207] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 2.280119] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.291154] sda: sda1 sda2 < sda5 > [ 2.292982] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.379390] usb 1-5: New USB device found, idVendor=152e, idProduct=2571 [ 2.379399] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.379403] usb 1-5: Product: Portable Super Multi Drive [ 2.379407] usb 1-5: Manufacturer: HLDS Inc [ 2.379410] usb 1-5: SerialNumber: HitachLGda000000872 [ 2.424559] ata2.00: ATAPI: LITE-ON DVDRW LH-16W1P, SL08, max UDMA/66 [ 2.424575] ata2.00: limited to UDMA/33 due to 40-wire cable [ 2.433119] usb 3-1: New USB device found, idVendor=046d, idProduct=c315 [ 2.433129] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.433133] usb 3-1: Product: Logitech USB Keyboard [ 2.433136] usb 3-1: Manufacturer: Logitech [ 2.456490] ata2.00: configured for UDMA/33 [ 2.458622] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-16W1P SL08 PQ: 0 ANSI: 5 [ 2.474323] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.474337] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.474870] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.475384] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.514927] hidraw: raw HID events driver (C) Jiri Kosina [ 2.543645] usbcore: registered new interface driver usbhid [ 2.543655] usbhid: USB HID core driver [ 2.555182] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:046D:C315.0001/input/input5 [ 2.609120] hid-generic 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-1/input0 [ 2.661587] usb-storage 1-5:1.0: USB Mass Storage device detected [ 2.661983] scsi host4: usb-storage 1-5:1.0 [ 2.664103] usbcore: registered new interface driver usb-storage [ 2.674838] usbcore: registered new interface driver uas [ 2.676099] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.687116] usb 3-2: new low-speed USB device number 3 using uhci_hcd [ 2.863032] usb 3-2: New USB device found, idVendor=046d, idProduct=c408 [ 2.863042] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.863046] usb 3-2: Product: USB Trackball [ 2.863050] usb 3-2: Manufacturer: Logitech [ 2.882954] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C408.0002/input/input6 [ 2.884973] hid-generic 0003:046D:C408.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:10.1-2/input0 [ 3.066714] Switched to clocksource tsc [ 3.188605] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.665400] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GP08NU6B 1.00 PQ: 0 ANSI: 0 [ 3.670094] sr 4:0:0:0: [sr1] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.670617] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 3.671071] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 4.192270] systemd[1]: Inserted module 'autofs4' [ 4.331973] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 4.332989] systemd[1]: Detected architecture x86. [ 4.362513] systemd[1]: Set hostname to . [ 4.433427] systemd[1]: Initializing machine ID from random generator. [ 4.433761] systemd[1]: Installed transient /etc/machine-id file. [ 4.476276] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output. [ 4.680278] random: nonblocking pool is initialized [ 5.491727] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.491833] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.492296] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.492378] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.492478] systemd[1]: Reached target Encrypted Volumes. [ 5.492542] systemd[1]: Starting Encrypted Volumes. [ 5.492648] systemd[1]: Reached target Remote File Systems (Pre). [ 5.492712] systemd[1]: Starting Remote File Systems (Pre). [ 5.492953] systemd[1]: Created slice Root Slice. [ 5.493032] systemd[1]: Starting Root Slice. [ 5.493406] systemd[1]: Listening on Journal Socket. [ 5.493540] systemd[1]: Starting Journal Socket. [ 5.493845] systemd[1]: Listening on udev Control Socket. [ 5.493920] systemd[1]: Starting udev Control Socket. [ 5.494555] systemd[1]: Created slice User and Session Slice. [ 5.494629] systemd[1]: Starting User and Session Slice. [ 5.494854] systemd[1]: Listening on udev Kernel Socket. [ 5.494926] systemd[1]: Starting udev Kernel Socket. [ 5.495156] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.495227] systemd[1]: Starting Delayed Shutdown Socket. [ 5.495885] systemd[1]: Created slice System Slice. [ 5.496129] systemd[1]: Starting System Slice. [ 5.500439] systemd[1]: Starting Uncomplicated firewall... [ 5.509245] systemd[1]: Started Read required files in advance. [ 5.516204] systemd[1]: Starting Read required files in advance... [ 5.520643] systemd[1]: Starting Nameserver information manager... [ 5.625417] systemd[1]: Started Set Up Additional Binary Formats. [ 5.630097] systemd[1]: Mounting Huge Pages File System... [ 5.644512] systemd[1]: Mounting POSIX Message Queue File System... [ 5.644704] systemd[1]: Reached target Slices. [ 5.644824] systemd[1]: Starting Slices. [ 5.645616] systemd[1]: Created slice system-getty.slice. [ 5.645707] systemd[1]: Starting system-getty.slice. [ 5.658191] systemd[1]: Started Braille Device Support. [ 5.658575] systemd[1]: Starting Braille Device Support... [ 5.666907] systemd[1]: Starting udev Coldplug all Devices... [ 5.681267] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.690344] systemd[1]: Starting Increase datagram queue length... [ 5.935739] systemd[1]: Starting Load Kernel Modules... [ 5.949253] systemd[1]: Mounting Debug File System... [ 5.958067] systemd[1]: Starting Setup Virtual Console... [ 5.958508] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.958639] systemd[1]: Starting Journal Socket (/dev/log). [ 5.959000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.959077] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.959370] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.959446] systemd[1]: Starting fsck to fsckd communication Socket. [ 5.959877] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.959956] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 5.968433] systemd[1]: Listening on Journal Audit Socket. [ 5.968514] systemd[1]: Starting Journal Audit Socket. [ 5.981873] systemd[1]: Started Uncomplicated firewall. [ 6.048753] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.058377] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.113072] systemd[1]: Started Setup Virtual Console. [ 6.259738] systemd[1]: Started udev Coldplug all Devices. [ 6.266483] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 6.418593] systemd[1]: Mounted Debug File System. [ 6.418822] systemd[1]: Mounted POSIX Message Queue File System. [ 6.419015] systemd[1]: Mounted Huge Pages File System. [ 6.442609] systemd[1]: Started Increase datagram queue length. [ 6.503878] systemd[1]: Listening on Syslog Socket. [ 6.503973] systemd[1]: Starting Syslog Socket. [ 6.508624] systemd[1]: Starting Journal Service... [ 6.530807] systemd[1]: Started Nameserver information manager. [ 6.924699] lp: driver loaded but no devices found [ 6.984294] ppdev: user-space parallel port driver [ 7.044314] parport_pc 00:06: reported by Plug and Play ACPI [ 7.044378] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.140546] lp0: using parport0 (interrupt-driven). [ 7.298252] systemd[1]: Started Load Kernel Modules. [ 7.303251] systemd[1]: Starting Apply Kernel Variables... [ 7.328199] systemd[1]: Mounting FUSE Control File System... [ 7.328696] systemd[1]: Mounted Configuration File System. [ 7.367812] systemd[1]: Mounted FUSE Control File System. [ 7.551291] systemd[1]: Started Journal Service. [ 9.041424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.402004] [drm] Initialized drm 1.1.0 20060810 [ 9.765423] wmi: Mapper loaded [ 10.042261] media: Linux media interface: v0.10 [ 10.271168] Linux video capture interface: v2.00 [ 10.346937] checking generic (c0000000 300000) vs hw (c0000000 20000000) [ 10.346948] fb: switching to nouveaufb from VESA VGA [ 10.347020] Console: switching to colour dummy device 80x25 [ 10.360201] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x04a100a1 [ 10.360211] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44A (NV4A) [ 10.360215] nouveau [ DEVICE][0000:01:00.0] Family : NV40 [ 10.681718] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 10.681863] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 10.681873] nouveau [ VBIOS][0000:01:00.0] version 05.44.a2.10.01 [ 10.720381] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 10.720392] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 10.720395] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 11.020844] Adding 1045500k swap on /dev/sda5. Priority:-1 extents:1 across:1045500k FS [ 11.069444] uvcvideo: Found UVC 1.00 device (046d:0825) [ 11.169464] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:10.4/usb1/1-2/1-2:1.0/input/input7 [ 11.169884] usbcore: registered new interface driver uvcvideo [ 11.169893] USB Video Class driver (1.1.1) [ 11.241908] nouveau [ PTHERM][0000:01:00.0] FAN control: toggle [ 11.241925] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 11.241929] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 11.279084] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 532 MHz [ 11.279109] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz [ 11.279268] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 11.279297] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode. [ 11.279310] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 11.279396] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 11.292210] [TTM] Zone kernel: Available graphics memory: 444934 kiB [ 11.292219] [TTM] Zone highmem: Available graphics memory: 511946 kiB [ 11.292222] [TTM] Initializing pool allocator [ 11.292250] [TTM] Initializing DMA pool allocator [ 11.292300] nouveau [ DRM] VRAM: 508 MiB [ 11.292306] nouveau [ DRM] GART: 128 MiB [ 11.292317] nouveau [ DRM] TMDS table version 1.1 [ 11.292321] nouveau [ DRM] DCB version 3.0 [ 11.292326] nouveau [ DRM] DCB outp 00: 01000300 00000028 [ 11.292332] nouveau [ DRM] DCB outp 01: 02011310 00000028 [ 11.292335] nouveau [ DRM] DCB outp 02: 01011312 00000000 [ 11.292339] nouveau [ DRM] DCB outp 03: 020223f1 00c0c080 [ 11.292343] nouveau [ DRM] DCB conn 00: 0000 [ 11.292348] nouveau [ DRM] DCB conn 01: 2230 [ 11.292351] nouveau [ DRM] DCB conn 02: 0110 [ 11.292354] nouveau [ DRM] DCB conn 03: 0111 [ 11.292357] nouveau [ DRM] DCB conn 04: 0113 [ 11.332132] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.332144] [drm] Driver supports precise vblank timestamp query. [ 11.332161] nouveau [ DRM] 0xD2B3: Parsing digital output script table [ 11.478962] nouveau [ DRM] MM: using M2MF for buffer copies [ 11.479004] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3) [ 11.628464] nouveau [ DRM] allocated 1360x768 fb: 0x9000, bo f38f4c00 [ 11.628792] fbcon: nouveaufb (fb0) is primary device [ 11.628994] Console: switching to colour frame buffer device 170x48 [ 11.629053] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 11.629058] nouveau 0000:01:00.0: registered panic notifier [ 11.630224] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0 [ 11.966578] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 12.860567] usb 1-2: set resolution quirk: cval->res = 384 [ 12.862265] usbcore: registered new interface driver snd-usb-audio [ 14.292425] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.518243] systemd-journald[200]: Received request to flush runtime journal from PID 1 [ 15.569577] audit: type=1400 audit(1442245972.368:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=412 comm="apparmor_parser" [ 15.569615] audit: type=1400 audit(1442245972.368:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=412 comm="apparmor_parser" [ 15.590169] audit: type=1400 audit(1442245972.388:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=412 comm="apparmor_parser" [ 15.590213] audit: type=1400 audit(1442245972.388:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=412 comm="apparmor_parser" [ 15.590239] audit: type=1400 audit(1442245972.388:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=412 comm="apparmor_parser" [ 15.590264] audit: type=1400 audit(1442245972.388:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=412 comm="apparmor_parser" [ 15.611547] audit: type=1400 audit(1442245972.408:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=412 comm="apparmor_parser" [ 15.630035] audit: type=1400 audit(1442245972.428:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=412 comm="apparmor_parser" [ 15.630077] audit: type=1400 audit(1442245972.428:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=412 comm="apparmor_parser" [ 15.630101] audit: type=1400 audit(1442245972.428:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=412 comm="apparmor_parser" [ 23.412178] cfg80211: Calling CRDA to update world regulatory domain [ 24.017734] cfg80211: World regulatory domain updated: [ 24.017747] cfg80211: DFS Master region: unset [ 24.017751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.017756] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.017760] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.017764] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.017767] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.017771] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 200.108197] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 200.109318] CPU0: Core temperature/speed normal [ 300.000066] mce: [Hardware Error]: Machine check events logged [ 450.000100] mce: [Hardware Error]: Machine check events logged [ 525.000071] mce: [Hardware Error]: Machine check events logged [ 562.500079] mce: [Hardware Error]: Machine check events logged [ 582.238026] CPU0: Core temperature above threshold, cpu clock throttled (total events = 2167) [ 582.238997] CPU0: Core temperature/speed normal [ 807.732915] show_signal_msg: 6 callbacks suppressed [ 807.732951] bzip2[1795]: segfault at bcd6a8c3 ip b732a28d sp bf9915ff error 4 in libbz2.so.1.0.4[b7320000+10000] [ 809.427271] perf interrupt took too long (2563 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 889.267829] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5635) [ 889.268858] CPU0: Core temperature/speed normal [ 986.010500] update-apt-xapi[1914]: segfault at 0 ip (null) sp bfddc66c error 4 in python2.7[8048000+34f000] [ 1189.269496] CPU0: Core temperature/speed normal [ 1277.926652] perf interrupt took too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 1489.268061] CPU0: Core temperature above threshold, cpu clock throttled (total events = 175088) [ 1489.269322] CPU0: Core temperature/speed normal [ 1667.761010] bzip2[2644]: segfault at bb23e86e ip b728528d sp bfe1b4af error 4 in libbz2.so.1.0.4[b727b000+10000] [ 1765.318441] bzip2[2907]: segfault at 11a6f73f ip b72d8047 sp bfdf4100 error 4 in libbz2.so.1.0.4[b72ce000+10000] [ 1772.519363] bzip2[2919]: segfault at bdca6693 ip b729e28d sp bfdbf9ff error 4 in libbz2.so.1.0.4[b7294000+10000] [ 1789.268071] CPU0: Core temperature above threshold, cpu clock throttled (total events = 237208) [ 1789.269295] CPU0: Core temperature/speed normal [ 1861.460350] bzip2[2945]: segfault at bb67c583 ip b729228d sp bfeaf79f error 4 in libbz2.so.1.0.4[b7288000+10000] [ 1939.060251] usb 1-1: new high-speed USB device number 6 using ehci-pci [ 1939.221376] usb 1-1: New USB device found, idVendor=050d, idProduct=815c [ 1939.221402] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1939.221416] usb 1-1: Product: F5D8053 N Wireless USB Adapter [ 1939.221466] usb 1-1: Manufacturer: Belkin [ 1941.280270] usb 1-1: reset high-speed USB device number 6 using ehci-pci [ 1941.428667] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0101 detected [ 1941.483398] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected [ 1941.639239] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 1941.653347] usbcore: registered new interface driver rt2800usb [ 1942.155608] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 1942.315069] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 2014.056709] wlan0: authenticate with ec:1a:59:02:84:8e [ 2014.106277] wlan0: send auth to ec:1a:59:02:84:8e (try 1/3) [ 2014.107966] wlan0: authenticated [ 2014.116144] wlan0: associate with ec:1a:59:02:84:8e (try 1/3) [ 2014.119667] wlan0: RX AssocResp from ec:1a:59:02:84:8e (capab=0x411 status=0 aid=6) [ 2014.136652] wlan0: associated [ 2089.268092] CPU0: Core temperature/speed normal [ 2389.268134] CPU0: Core temperature above threshold, cpu clock throttled (total events = 366582) [ 2389.269107] CPU0: Core temperature/speed normal [ 2689.268514] CPU0: Core temperature/speed normal [ 2779.266109] dpkg-deb[13932]: segfault at a96d67d ip b771e28d sp bfff8c0f error 4 in libbz2.so.1.0.4[b7714000+10000]