[ 0.000000] Linux version 2.6.22-12-generic (buildd@crested) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 20:03:18 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] Command line: root=UUID=07776035-2ee8-4ef6-a6a9-5ad6e06d2e59 ro quiet splash profile [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fef0000 (usable) [ 0.000000] BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP 000F7D10, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 6FEF3000, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 6FEF3080, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 6FEF3100, 7976 (r1 NVIDIA NVDAACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 6FEF1800, 0040 [ 0.000000] ACPI: SSDT 6FEFAB00, 030E (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 6FEFAE40, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 6FEFAE80, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 6FEFAA80, 0072 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000006fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 458480 [ 0.000000] On node 0 totalpages: 458383 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1145 pages reserved [ 0.000000] DMA zone: 2798 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6212 pages used for memmap [ 0.000000] DMA32 zone: 448172 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 450970 [ 0.000000] Kernel command line: root=UUID=07776035-2ee8-4ef6-a6a9-5ad6e06d2e59 ro quiet splash profile [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 24.177850] time.c: Detected 3000.001 MHz processor. [ 24.180670] Console: colour VGA+ 80x25 [ 24.180682] Checking aperture... [ 24.180684] CPU 0: aperture @ f852000000 size 32 MB [ 24.180685] Aperture too small (32 MB) [ 24.186352] No AGP bridge found [ 24.197810] Memory: 1796768k/1833920k available (2281k kernel code, 36764k reserved, 1182k data, 300k init) [ 24.197845] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.276420] Calibrating delay using timer specific routine.. 6005.54 BogoMIPS (lpj=12011090) [ 24.276443] Security Framework v1.0.0 initialized [ 24.276448] SELinux: Disabled at boot. [ 24.276568] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 24.277481] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.277969] Mount-cache hash table entries: 256 [ 24.278068] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.278070] CPU: L2 Cache: 1024K (64 bytes/line) [ 24.278072] CPU 0/0 -> Node 0 [ 24.278073] CPU: Physical Processor ID: 0 [ 24.278074] CPU: Processor Core ID: 0 [ 24.278088] SMP alternatives: switching to UP code [ 24.278271] Early unpacking initramfs... done [ 24.466311] ACPI: Core revision 20070126 [ 24.466355] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.510186] Using local APIC timer interrupts. [ 24.543489] result 12500011 [ 24.543490] Detected 12.500 MHz APIC timer. [ 24.544196] SMP alternatives: switching to SMP code [ 24.544265] Booting processor 1/2 APIC 0x1 [ 24.554704] Initializing CPU#1 [ 24.632437] Calibrating delay using timer specific routine.. 5999.92 BogoMIPS (lpj=11999851) [ 24.632441] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.632443] CPU: L2 Cache: 1024K (64 bytes/line) [ 24.632445] CPU 1/1 -> Node 0 [ 24.632446] CPU: Physical Processor ID: 0 [ 24.632447] CPU: Processor Core ID: 1 [ 24.632528] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 24.636070] Brought up 2 CPUs [ 25.264946] migration_cost=289 [ 25.264714] NET: Registered protocol family 16 [ 25.264777] ACPI: bus type pci registered [ 25.264781] PCI: Using configuration type 1 [ 25.265644] ACPI: EC: Look up EC in DSDT [ 25.270711] ACPI: Interpreter enabled [ 25.270713] ACPI: (supports S0 S3 S4 S5) [ 25.270724] ACPI: Using IOAPIC for interrupt routing [ 25.277743] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.277748] PCI: Probing PCI hardware (bus 00) [ 25.278365] PCI: Transparent bridge - 0000:00:08.0 [ 25.278707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.278969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 25.324822] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.324952] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) [ 25.325081] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15) [ 25.325209] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 25.325336] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.325464] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.325591] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.325721] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.325848] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.325978] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 25.326106] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 25.326234] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 25.326363] ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15) [ 25.326491] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15) [ 25.326623] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 25.326751] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 25.326879] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.327007] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 25.327134] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 25.327263] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 25.327420] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 25.327570] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 25.327719] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 25.327867] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 25.328016] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 25.328165] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 25.328314] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 25.328464] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 25.328613] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 25.328763] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 25.328915] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 25.329065] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 25.329216] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 25.329366] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 25.329516] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 25.329667] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 25.329816] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 25.329966] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 25.330116] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 25.330266] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 25.330336] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.330342] pnp: PnP ACPI init [ 25.330349] ACPI: bus type pnp registered [ 25.333712] pnp: PnP ACPI: found 10 devices [ 25.333713] ACPI: ACPI bus type pnp unregistered [ 25.333751] PCI: Using ACPI for IRQ routing [ 25.333753] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.333814] NET: Registered protocol family 8 [ 25.333815] NET: Registered protocol family 20 [ 25.333868] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 25.333871] hpet0: 3 32-bit timers, 25000000 Hz [ 25.334913] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 25.334915] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 25.334917] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 25.334919] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 25.334921] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 25.334923] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 25.334924] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 25.334926] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 25.334928] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 25.334930] pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 25.334932] pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 25.334937] pnp: 00:08: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 25.334940] pnp: 00:09: iomem range 0xf0000-0xfffff could not be reserved [ 25.334943] pnp: 00:09: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 25.334945] pnp: 00:09: iomem range 0x6fef0000-0x6fefffff could not be reserved [ 25.334947] pnp: 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 25.335155] PCI: Bridge: 0000:00:08.0 [ 25.335157] IO window: c000-cfff [ 25.335160] MEM window: fd000000-fd0fffff [ 25.335162] PREFETCH window: fdf00000-fdffffff [ 25.335164] PCI: Bridge: 0000:00:0b.0 [ 25.335165] IO window: b000-bfff [ 25.335167] MEM window: fde00000-fdefffff [ 25.335169] PREFETCH window: fdd00000-fddfffff [ 25.335171] PCI: Bridge: 0000:00:0c.0 [ 25.335172] IO window: a000-afff [ 25.335174] MEM window: fdc00000-fdcfffff [ 25.335176] PREFETCH window: fdb00000-fdbfffff [ 25.335178] PCI: Bridge: 0000:00:0d.0 [ 25.335179] IO window: 9000-9fff [ 25.335181] MEM window: fda00000-fdafffff [ 25.335183] PREFETCH window: fd900000-fd9fffff [ 25.335184] PCI: Bridge: 0000:00:0e.0 [ 25.335186] IO window: 8000-8fff [ 25.335188] MEM window: fd800000-fd8fffff [ 25.335190] PREFETCH window: fd700000-fd7fffff [ 25.335191] PCI: Bridge: 0000:00:0f.0 [ 25.335193] IO window: 7000-7fff [ 25.335195] MEM window: fd600000-fd6fffff [ 25.335196] PREFETCH window: fd500000-fd5fffff [ 25.335198] PCI: Bridge: 0000:00:10.0 [ 25.335199] IO window: 6000-6fff [ 25.335201] MEM window: fd400000-fd4fffff [ 25.335203] PREFETCH window: fd300000-fd3fffff [ 25.335205] PCI: Bridge: 0000:00:11.0 [ 25.335206] IO window: 5000-5fff [ 25.335208] MEM window: fd200000-fd2fffff [ 25.335210] PREFETCH window: fd100000-fd1fffff [ 25.335217] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.335222] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 25.335226] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 25.335230] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.335235] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 25.335239] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 25.335243] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 25.335247] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 25.335256] NET: Registered protocol family 2 [ 25.335753] Time: hpet clocksource has been installed. [ 25.375398] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 25.375956] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 25.378188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 25.378633] TCP: Hash tables configured (established 262144 bind 65536) [ 25.378635] TCP reno registered [ 25.391417] checking if image is initramfs... it is [ 25.763099] Freeing initrd memory: 6973k freed [ 25.766767] audit: initializing netlink socket (disabled) [ 25.766778] audit(1191330027.556:1): initialized [ 25.768077] VFS: Disk quotas dquot_6.5.1 [ 25.768108] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 25.768164] io scheduler noop registered [ 25.768165] io scheduler anticipatory registered [ 25.768167] io scheduler deadline registered [ 25.768223] io scheduler cfq registered (default) [ 25.769630] Boot video device is 0000:00:12.0 [ 25.770002] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 25.770019] assign_interrupt_mode Found MSI capability [ 25.770033] Allocate Port Service[0000:00:0b.0:pcie00] [ 25.770078] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 25.770093] assign_interrupt_mode Found MSI capability [ 25.770103] Allocate Port Service[0000:00:0c.0:pcie00] [ 25.770142] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.770156] assign_interrupt_mode Found MSI capability [ 25.770166] Allocate Port Service[0000:00:0d.0:pcie00] [ 25.770200] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 25.770215] assign_interrupt_mode Found MSI capability [ 25.770225] Allocate Port Service[0000:00:0e.0:pcie00] [ 25.770259] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 25.770273] assign_interrupt_mode Found MSI capability [ 25.770283] Allocate Port Service[0000:00:0f.0:pcie00] [ 25.770321] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 25.770335] assign_interrupt_mode Found MSI capability [ 25.770345] Allocate Port Service[0000:00:10.0:pcie00] [ 25.770382] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 25.770396] assign_interrupt_mode Found MSI capability [ 25.770406] Allocate Port Service[0000:00:11.0:pcie00] [ 25.785424] Real Time Clock Driver v1.12ac [ 25.785570] hpet_resources: 0xfeff0000 is busy [ 25.785595] Linux agpgart interface v0.102 (c) Dave Jones [ 25.785597] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.786245] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.786346] input: Macintosh mouse button emulation as /class/input/input0 [ 25.786412] PNP: No PS/2 controller found. Probing ports directly. [ 26.039416] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.039500] mice: PS/2 mouse device common for all mice [ 26.039585] TCP cubic registered [ 26.039617] NET: Registered protocol family 1 [ 26.039774] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 26.039780] Freeing unused kernel memory: 300k freed [ 27.162258] Capability LSM initialized [ 27.163852] ACPI: Fan [FAN] (on) [ 27.565316] ACPI: Thermal Zone [THRM] (35 C) [ 27.894156] usbcore: registered new interface driver usbfs [ 27.894177] usbcore: registered new interface driver hub [ 27.894193] usbcore: registered new device driver usb [ 27.894624] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 27.894920] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 27.894928] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 27.895269] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 27.895275] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 27.895407] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 27.895421] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 27.907555] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 27.907561] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 27.916545] SCSI subsystem initialized [ 27.919778] libata version 2.21 loaded. [ 27.925021] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 27.960616] usb usb1: configuration #1 chosen from 1 choice [ 27.960638] hub 1-0:1.0: USB hub found [ 27.960644] hub 1-0:1.0: 6 ports detected [ 27.980057] USB Universal Host Controller Interface driver v3.0 [ 28.060993] NFORCE-MCP67: IDE controller at PCI slot 0000:00:06.0 [ 28.061008] NFORCE-MCP67: chipset revision 161 [ 28.061010] NFORCE-MCP67: not 100% native mode: will probe irqs later [ 28.061012] NFORCE-MCP67: BIOS didn't set cable bits correctly. Enabling workaround. [ 28.061016] NFORCE-MCP67: 0000:00:06.0 (rev a1) UDMA133 controller [ 28.061021] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 28.061028] Probing IDE interface ide0... [ 28.796100] hda: ASUS DRW-1814BL, ATAPI CD/DVD-ROM drive [ 29.467580] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 29.468601] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 [ 29.468610] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 29.468911] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 29.468916] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 29.468959] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 29.468987] ehci_hcd 0000:00:02.1: debug port 1 [ 29.468989] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 29.468999] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 29.469006] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.469074] usb usb2: configuration #1 chosen from 1 choice [ 29.469092] hub 2-0:1.0: USB hub found [ 29.469097] hub 2-0:1.0: 6 ports detected [ 29.571936] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21 [ 29.571944] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 21 (level, low) -> IRQ 21 [ 29.572092] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 29.572097] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 29.572143] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3 [ 29.572167] ehci_hcd 0000:00:04.1: debug port 1 [ 29.572170] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 29.572181] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe02c000 [ 29.572188] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.572262] usb usb3: configuration #1 chosen from 1 choice [ 29.572280] hub 3-0:1.0: USB hub found [ 29.572284] hub 3-0:1.0: 6 ports detected [ 29.675851] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 29.675858] ACPI: PCI Interrupt 0000:01:09.2[C] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 29.676024] PCI: Setting latency timer of device 0000:01:09.2 to 64 [ 29.676030] ehci_hcd 0000:01:09.2: EHCI Host Controller [ 29.676073] ehci_hcd 0000:01:09.2: new USB bus registered, assigned bus number 4 [ 29.676112] ehci_hcd 0000:01:09.2: irq 19, io mem 0xfd0fe000 [ 29.676118] ehci_hcd 0000:01:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.676195] usb usb4: configuration #1 chosen from 1 choice [ 29.676217] hub 4-0:1.0: USB hub found [ 29.676222] hub 4-0:1.0: 4 ports detected [ 29.779593] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 29.779603] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 [ 29.779607] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 29.779614] forcedeth: using HIGHDMA [ 30.098740] usb 4-1: new high speed USB device using ehci_hcd and address 2 [ 30.232156] usb 4-1: configuration #1 chosen from 1 choice [ 30.298868] eth0: forcedeth.c: subsystem: 0147b:1c2e bound to 0000:00:0a.0 [ 30.299549] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23 [ 30.299553] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 23 (level, low) -> IRQ 23 [ 30.299909] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.299914] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 30.299965] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5 [ 30.299977] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000 [ 30.356966] usb usb5: configuration #1 chosen from 1 choice [ 30.356987] hub 5-0:1.0: USB hub found [ 30.356992] hub 5-0:1.0: 6 ports detected [ 30.458542] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 30.458550] PCI: Setting latency timer of device 0000:01:07.0 to 64 [ 30.508687] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fd0ff000-fd0ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 30.509121] ahci 0000:00:09.0: version 2.2 [ 30.509426] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 30.509429] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 [ 30.762545] usb 5-4: new low speed USB device using ohci_hcd and address 2 [ 30.966438] usb 5-4: configuration #1 chosen from 1 choice [ 31.509908] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 31.509912] ahci 0000:00:09.0: flags: 64bit ncq led clo pmp pio [ 31.509915] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 31.510472] scsi0 : ahci [ 31.510640] scsi1 : ahci [ 31.510755] scsi2 : ahci [ 31.510870] scsi3 : ahci [ 31.511015] ata1: SATA max UDMA/133 cmd 0xffffc20000ab4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504 [ 31.511018] ata2: SATA max UDMA/133 cmd 0xffffc20000ab4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504 [ 31.511021] ata3: SATA max UDMA/133 cmd 0xffffc20000ab4200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504 [ 31.511024] ata4: SATA max UDMA/133 cmd 0xffffc20000ab4280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504 [ 31.777747] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d00009b1113] [ 31.993108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 32.013568] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 32.013570] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 32.015873] ata1.00: configured for UDMA/133 [ 32.324822] ata2: SATA link down (SStatus 0 SControl 300) [ 32.636554] ata3: SATA link down (SStatus 0 SControl 300) [ 32.948287] ata4: SATA link down (SStatus 0 SControl 300) [ 32.948736] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 32.950877] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 32.950886] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 32.950896] PCI: Setting latency timer of device 0000:01:09.0 to 64 [ 32.950899] uhci_hcd 0000:01:09.0: UHCI Host Controller [ 32.951052] uhci_hcd 0000:01:09.0: new USB bus registered, assigned bus number 6 [ 32.951087] uhci_hcd 0000:01:09.0: irq 17, io base 0x0000cc00 [ 32.951366] usb usb6: configuration #1 chosen from 1 choice [ 32.951480] hub 6-0:1.0: USB hub found [ 32.951485] hub 6-0:1.0: 2 ports detected [ 33.053179] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 33.053188] ACPI: PCI Interrupt 0000:01:09.1[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 33.053197] PCI: Setting latency timer of device 0000:01:09.1 to 64 [ 33.053199] uhci_hcd 0000:01:09.1: UHCI Host Controller [ 33.053316] uhci_hcd 0000:01:09.1: new USB bus registered, assigned bus number 7 [ 33.053345] uhci_hcd 0000:01:09.1: irq 18, io base 0x0000c800 [ 33.053616] usb usb7: configuration #1 chosen from 1 choice [ 33.053738] hub 7-0:1.0: USB hub found [ 33.053742] hub 7-0:1.0: 2 ports detected [ 33.169299] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) [ 33.169307] Uniform CD-ROM driver Revision: 3.20 [ 33.171820] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 33.172285] sd 0:0:0:0: [sda] Write Protect is off [ 33.172287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.172809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.172859] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 33.172864] sd 0:0:0:0: [sda] Write Protect is off [ 33.172866] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.172874] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.172877] sda: sda1 sda2 sda3 [ 33.260998] sd 0:0:0:0: [sda] Attached SCSI disk [ 33.263025] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.414325] Attempting manual resume [ 33.414327] swsusp: Resume From Partition 8:3 [ 33.414329] PM: Checking swsusp image. [ 33.414469] PM: Resume from disk failed. [ 33.449350] kjournald starting. Commit interval 5 seconds [ 33.449736] EXT3-fs: mounted filesystem with ordered data mode. [ 66.802005] NET: Registered protocol family 10 [ 66.802088] lo: Disabled Privacy Extensions [ 67.086657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 67.095970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 67.381091] lirc_dev: IR Remote Control driver registered, at major 61 [ 67.411180] input: PC Speaker as /class/input/input1 [ 67.657474] nvidia: module license 'NVIDIA' taints kernel. [ 67.910301] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3 [ 67.910305] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Venky Raju [ 67.910401] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: found IMON device [ 67.910408] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 67.910436] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:0) [ 67.910474] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<5:2> initialized [ 67.910487] usbcore: registered new interface driver lirc_imon [ 67.911702] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21 [ 67.911706] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AIGP] -> GSI 21 (level, low) -> IRQ 21 [ 67.911718] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 67.911858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 68.018632] dib0700: loaded with support for 5 different device-types [ 68.019021] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 68.019063] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 68.019199] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 68.137679] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 68.167004] MT2060: successfully identified (IF1 = 1220) [ 68.194926] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 68.194931] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 68.195298] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 68.644711] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 68.644893] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 68.650457] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 68.654952] MT2060: successfully identified (IF1 = 1220) [ 69.210292] input: IR-receiver inside an USB DVB receiver as /class/input/input2 [ 69.210317] dvb-usb: schedule remote query interval to 150 msecs. [ 69.210319] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 69.210472] usbcore: registered new interface driver dvb_usb_dib0700 [ 70.467699] fuse init (API version 7.8) [ 70.512629] lp: driver loaded but no devices found [ 70.681077] Adding 5116692k swap on /dev/sda3. Priority:-1 extents:1 across:5116692k [ 71.113513] EXT3 FS on sda1, internal journal [ 71.776489] kjournald starting. Commit interval 5 seconds [ 71.782761] EXT3 FS on sda2, internal journal [ 71.782766] EXT3-fs: mounted filesystem with ordered data mode. [ 72.415908] input: Power Button (FF) as /class/input/input3 [ 72.416065] ACPI: Power Button (FF) [PWRF] [ 72.437732] input: Power Button (CM) as /class/input/input4 [ 72.437762] ACPI: Power Button (CM) [PWRB] [ 72.447229] No dock devices found. [ 72.757599] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (version 2.00.00) [ 72.757385] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 72.757389] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 72.757391] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 72.757393] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 72.757394] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 72.757396] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 72.757397] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 72.757399] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 77.244838] ppdev: user-space parallel port driver [ 77.793015] eth0: no IPv6 routers present [ 81.359189] Bluetooth: Core ver 2.11 [ 81.359237] NET: Registered protocol family 31 [ 81.359239] Bluetooth: HCI device and connection manager initialized [ 81.359241] Bluetooth: HCI socket layer initialized [ 81.392814] Bluetooth: L2CAP ver 2.8 [ 81.392819] Bluetooth: L2CAP socket layer initialized [ 81.481514] Bluetooth: RFCOMM socket layer initialized [ 81.481570] Bluetooth: RFCOMM TTY layer initialized [ 81.481571] Bluetooth: RFCOMM ver 1.8 [ 83.724203] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: IR port opened