[   28.587589] ata5.00: irq_stat 0x40000008
[   28.587592] ata5.00: failed command: READ FPDMA QUEUED
[   28.587596] ata5.00: cmd 60/08:08:a0:58:8a/00:00:73:00:00/40 tag 1 ncq 4096 in
[   28.587596]          res 41/84:08:a2:58:8a/00:00:73:00:00/00 Emask 0x410 (ATA bus error) <F>
[   28.587597] ata5.00: status: { DRDY ERR }
[   28.587599] ata5.00: error: { ICRC ABRT }
[   28.587602] ata5: hard resetting link
[   28.907701] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   29.078781] ata5.00: configured for UDMA/100
[   29.078791] ata5: EH complete
[   29.912109] init: plymouth-upstart-bridge main process ended, respawning
[   29.915371] init: plymouth-upstart-bridge main process (1393) terminated with status 1
[   29.915378] init: plymouth-upstart-bridge main process ended, respawning
[   37.551536] wlan0: deauthenticating from e8:ba:70:61:e3:61 by local choice (reason=3)
[   37.564144] cfg80211: Calling CRDA to update world regulatory domain
[   37.573501] cfg80211: World regulatory domain updated:
[   37.573508] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.573513] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.573517] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.573520] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.573523] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.573526] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.711918] init: plymouth-stop pre-start process (2194) terminated with status 1
[   44.883223] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6
[   44.883227] ata5.00: irq_stat 0x40000008
[   44.883230] ata5.00: failed command: READ FPDMA QUEUED
[   44.883236] ata5.00: cmd 60/20:00:00:40:29/00:00:74:00:00/40 tag 0 ncq 16384 in
[   44.883236]          res 41/84:20:00:40:29/00:00:74:00:00/00 Emask 0x410 (ATA bus error) <F>
[   44.883238] ata5.00: status: { DRDY ERR }
[   44.883240] ata5.00: error: { ICRC ABRT }
[   44.883244] ata5: hard resetting link
[   45.200015] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   45.358427] ata5.00: configured for UDMA/100
[   45.358436] ata5: EH complete
[   45.410678] ata5.00: limiting speed to UDMA/33:PIO4
[   45.410681] ata5.00: exception Emask 0x0 SAct 0x51000442 SErr 0x0 action 0x6
[   45.410683] ata5.00: irq_stat 0x40000008
[   45.410685] ata5.00: failed command: READ FPDMA QUEUED
[   45.410688] ata5.00: cmd 60/00:08:e0:41:29/01:00:74:00:00/40 tag 1 ncq 131072 in
[   45.410688]          res 41/84:00:f2:41:29/00:01:74:00:00/00 Emask 0x410 (ATA bus error) <F>
[   45.410690] ata5.00: status: { DRDY ERR }
[   45.410691] ata5.00: error: { ICRC ABRT }
[   45.410694] ata5: hard resetting link
[   45.728509] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   45.891468] ata5.00: configured for UDMA/33
[   45.891480] ata5: EH complete
[   48.571858] ata5.00: exception Emask 0x0 SAct 0x25400000 SErr 0x0 action 0x6
[   48.571862] ata5.00: irq_stat 0x40000008
[   48.571866] ata5.00: failed command: READ FPDMA QUEUED
[   48.571871] ata5.00: cmd 60/88:e8:20:3b:a5/00:00:73:00:00/40 tag 29 ncq 69632 in
[   48.571871]          res 41/84:88:34:3b:a5/00:00:73:00:00/00 Emask 0x410 (ATA bus error) <F>
[   48.571873] ata5.00: status: { DRDY ERR }
[   48.571874] ata5.00: error: { ICRC ABRT }
[   48.571878] ata5: hard resetting link
[   48.891711] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   49.045233] ata5.00: configured for UDMA/33
[   49.045243] ata5: EH complete
[   49.440929] wlan0: authenticate with e8:ba:70:92:bb:51
[   49.467417] wlan0: send auth to e8:ba:70:92:bb:51 (try 1/3)
[   49.472160] wlan0: authenticated
[   49.476265] wlan0: associate with e8:ba:70:92:bb:51 (try 1/3)
[   49.480867] wlan0: RX AssocResp from e8:ba:70:92:bb:51 (capab=0x421 status=0 aid=20)
[   49.480908] wlan0: associated
[   49.480951] cfg80211: Calling CRDA for country: IN
[   49.483196] ath: EEPROM regdomain: 0x8164
[   49.483198] ath: EEPROM indicates we should expect a country code
[   49.483198] ath: doing EEPROM country->regdmn map search
[   49.483199] ath: country maps to regdmn code: 0x5b
[   49.483200] ath: Country alpha2 being used: IN
[   49.483201] ath: Regpair used: 0x5b
[   49.483202] ath: regdomain 0x8164 dynamically updated by country IE
[   49.483218] cfg80211: Regulatory domain changed to country: IN
[   49.483218] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.483219] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.483220] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.483221] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.483222] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   51.938652] ata5.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6
[   51.938656] ata5.00: irq_stat 0x40000008
[   51.938658] ata5.00: failed command: READ FPDMA QUEUED
[   51.938663] ata5.00: cmd 60/b0:10:28:cb:16/00:00:73:00:00/40 tag 2 ncq 90112 in
[   51.938663]          res 41/84:b0:8a:cb:16/00:00:73:00:00/00 Emask 0x410 (ATA bus error) <F>
[   51.938665] ata5.00: status: { DRDY ERR }
[   51.938666] ata5.00: error: { ICRC ABRT }
[   51.938669] ata5: hard resetting link
[   52.255078] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   52.421175] ata5.00: configured for UDMA/33
[   52.421183] ata5: EH complete
[   79.166672] r8169 0000:08:00.0 eth0: link up
[   79.166679] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  190.543842] wlan0: authenticate with e8:ba:70:61:e3:61
[  190.563910] wlan0: direct probe to e8:ba:70:61:e3:61 (try 1/3)
[  190.563993] cfg80211: Calling CRDA to update world regulatory domain
[  190.566192] cfg80211: World regulatory domain updated:
[  190.566194] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  190.566195] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  190.566197] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  190.566197] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  190.566198] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  190.566199] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  190.765757] wlan0: direct probe to e8:ba:70:61:e3:61 (try 2/3)
[  190.969986] wlan0: send auth to e8:ba:70:61:e3:61 (try 3/3)
[  190.976897] wlan0: authenticated
[  190.977987] wlan0: associate with e8:ba:70:61:e3:61 (try 1/3)
[  190.986873] wlan0: RX AssocResp from e8:ba:70:61:e3:61 (capab=0x421 status=0 aid=95)
[  190.986945] wlan0: associated
[  190.987057] cfg80211: Calling CRDA for country: IN
[  190.992588] ath: EEPROM regdomain: 0x8164
[  190.992595] ath: EEPROM indicates we should expect a country code
[  190.992598] ath: doing EEPROM country->regdmn map search
[  190.992601] ath: country maps to regdmn code: 0x5b
[  190.992605] ath: Country alpha2 being used: IN
[  190.992607] ath: Regpair used: 0x5b
[  190.992611] ath: regdomain 0x8164 dynamically updated by country IE
[  190.992635] cfg80211: Regulatory domain changed to country: IN
[  190.992637] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  190.992642] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  190.992645] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  190.992648] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  190.992651] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  255.097431] cfg80211: Calling CRDA to update world regulatory domain
[  255.106648] cfg80211: World regulatory domain updated:
[  255.106654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  255.106659] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  255.106662] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  255.106665] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  255.106668] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  255.106671] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  255.262863] wlan0: authenticate with e8:ba:70:92:bb:51
[  255.286574] wlan0: send auth to e8:ba:70:92:bb:51 (try 1/3)
[  255.288418] wlan0: authenticated
[  255.290361] wlan0: associate with e8:ba:70:92:bb:51 (try 1/3)
[  255.297697] wlan0: RX AssocResp from e8:ba:70:92:bb:51 (capab=0x421 status=0 aid=25)
[  255.297740] wlan0: associated
[  255.297822] cfg80211: Calling CRDA for country: IN
[  255.300761] ath: EEPROM regdomain: 0x8164
[  255.300764] ath: EEPROM indicates we should expect a country code
[  255.300766] ath: doing EEPROM country->regdmn map search
[  255.300767] ath: country maps to regdmn code: 0x5b
[  255.300769] ath: Country alpha2 being used: IN
[  255.300770] ath: Regpair used: 0x5b
[  255.300772] ath: regdomain 0x8164 dynamically updated by country IE
[  255.300790] cfg80211: Regulatory domain changed to country: IN
[  255.300791] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  255.300793] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  255.300795] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  255.300796] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  255.300798] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)