[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff00000 (usable) [ 0.000000] BIOS-e820: 000000007ff00000 - 000000007ff16000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff16000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f8910 [ 0.000000] Entering add_active_range(0, 0, 524032) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524032 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524032 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292354 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F88E0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 7FF0CC56, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FF15B16, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7FF0CC96, 8E80 (r1 HP MCP51M 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FF16FC0, 0040 [ 0.000000] ACPI: SSDT 7FF15B8A, 0206 (r1 HP POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7FF15D90, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7FF15DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7FF15E04, 005E (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FF15E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FF15E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 519938 [ 0.000000] Kernel command line: root=UUID=718d681a-24a0-4be7-9515-5c586d7a8c4a ro splash vga=0x314 [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.171 MHz processor. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2066580k/2096128k available (2017k kernel code, 28248k reserved, 918k data, 364k init, 1178624k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000000] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 0.000000] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 0.000000] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.000000] hpet0: 3 32-bit timers, 25000000 Hz [ 0.080000] Calibrating delay using timer specific routine.. 4021.70 BogoMIPS (lpj=8043400) [ 0.080000] Security Framework v1.0.0 initialized [ 0.080000] SELinux: Disabled at boot. [ 0.080000] Mount-cache hash table entries: 512 [ 0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.080000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.080000] CPU 0(2) -> Core 0 [ 0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.080000] Compat vDSO mapped to ffffe000. [ 0.080000] Checking 'hlt' instruction... OK. [ 0.096000] SMP alternatives: switching to UP code [ 0.096000] Early unpacking initramfs... done [ 0.376000] ACPI: Core revision 20070126 [ 0.376000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.384000] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.384000] SMP alternatives: switching to SMP code [ 0.384000] Booting processor 1/1 eip 3000 [ 0.392000] Initializing CPU#1 [ 0.476000] Calibrating delay using timer specific routine.. 4018.32 BogoMIPS (lpj=8036659) [ 0.476000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.476000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.476000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.476000] CPU 1(2) -> Core 1 [ 0.476000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.476000] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.476000] Total of 2 processors activated (8040.02 BogoMIPS). [ 0.476000] ENABLING IO-APIC IRQs [ 0.476000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.520000] Brought up 2 CPUs [ 0.544000] migration_cost=4000 [ 0.544000] Booting paravirtualized kernel on bare hardware [ 0.544000] Time: 6:35:42 Date: 08/28/107 [ 0.544000] NET: Registered protocol family 16 [ 0.544000] EISA bus registered [ 0.544000] ACPI: bus type pci registered [ 0.560000] PCI: BIOS BUG #81[49435000] found [ 0.560000] PCI: Using configuration type 1 [ 0.560000] Setting up standard PCI resources [ 0.560000] ACPI: EC: Look up EC in DSDT [ 0.560000] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 0.564000] ACPI: System BIOS is requesting _OSI(Linux) [ 0.564000] ACPI: Please test with "acpi_osi=!Linux" [ 0.564000] Please send dmidecode to linux-acpi@vger.kernel.org [ 0.564000] ACPI: Interpreter enabled [ 0.564000] ACPI: (supports S0 S3 S4 S5) [ 0.564000] ACPI: Using IOAPIC for interrupt routing [ 0.568000] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 0.568000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.568000] PCI: Probing PCI hardware (bus 00) [ 0.572000] PCI: Transparent bridge - 0000:00:10.0 [ 0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.608000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.608000] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 0.608000] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11 [ 0.608000] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.608000] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 0.608000] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 0.608000] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.608000] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.608000] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 0.608000] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 0.612000] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 0.612000] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 0.612000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.612000] pnp: PnP ACPI init [ 0.612000] ACPI: bus type pnp registered [ 0.612000] pnp: PnP ACPI: found 13 devices [ 0.612000] ACPI: ACPI bus type pnp unregistered [ 0.612000] PnPBIOS: Disabled by ACPI PNP [ 0.612000] PCI: Using ACPI for IRQ routing [ 0.612000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.612000] NET: Registered protocol family 8 [ 0.612000] NET: Registered protocol family 20 [ 0.612000] pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.612000] pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.612000] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.612000] pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.612000] pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.612000] pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.612000] pnp: 00:04: ioport range 0x1000-0x107f has been reserved [ 0.612000] pnp: 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.612000] pnp: 00:04: ioport range 0x1400-0x147f has been reserved [ 0.612000] pnp: 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.612000] pnp: 00:04: ioport range 0x1800-0x187f has been reserved [ 0.612000] pnp: 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.612000] pnp: 00:04: ioport range 0x2000-0x203f has been reserved [ 0.616000] Time: hpet clocksource has been installed. [ 0.644000] PCI: Bridge: 0000:00:02.0 [ 0.644000] IO window: 4000-4fff [ 0.644000] MEM window: c2000000-c3ffffff [ 0.644000] PREFETCH window: c8200000-c83fffff [ 0.644000] PCI: Bridge: 0000:00:03.0 [ 0.644000] IO window: disabled. [ 0.644000] MEM window: c4000000-c5ffffff [ 0.644000] PREFETCH window: disabled. [ 0.644000] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0 [ 0.644000] PCI: Bridge: 0000:00:04.0 [ 0.644000] IO window: disabled. [ 0.644000] MEM window: c6000000-c7ffffff [ 0.644000] PREFETCH window: d0000000-dfffffff [ 0.644000] PCI: Bridge: 0000:00:10.0 [ 0.644000] IO window: disabled. [ 0.644000] MEM window: c8000000-c80fffff [ 0.644000] PREFETCH window: disabled. [ 0.644000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.644000] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 0.644000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.644000] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 0.644000] NET: Registered protocol family 2 [ 0.700000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.700000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.700000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.700000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.700000] TCP reno registered [ 0.716000] checking if image is initramfs... it is [ 1.272000] Freeing initrd memory: 7124k freed [ 1.272000] Simple Boot Flag at 0x36 set to 0x1 [ 1.272000] audit: initializing netlink socket (disabled) [ 1.272000] audit(1190961343.116:1): initialized [ 1.272000] highmem bounce pool size: 64 pages [ 1.272000] VFS: Disk quotas dquot_6.5.1 [ 1.272000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.272000] io scheduler noop registered [ 1.272000] io scheduler anticipatory registered [ 1.272000] io scheduler deadline registered [ 1.272000] io scheduler cfq registered (default) [ 1.296000] Boot video device is 0000:05:00.0 [ 1.296000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1.296000] assign_interrupt_mode Found MSI capability [ 1.296000] Allocate Port Service[0000:00:02.0:pcie00] [ 1.296000] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 1.296000] assign_interrupt_mode Found MSI capability [ 1.296000] Allocate Port Service[0000:00:03.0:pcie00] [ 1.296000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 1.296000] assign_interrupt_mode Found MSI capability [ 1.296000] Allocate Port Service[0000:00:04.0:pcie00] [ 1.296000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1875k, total 65536k [ 1.296000] vesafb: mode is 800x600x16, linelength=1600, pages=2 [ 1.296000] vesafb: protected mode interface info at c000:d5d0 [ 1.296000] vesafb: pmi: set display start = c00cd606, set palette = c00cd670 [ 1.296000] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 1.296000] vesafb: scrolling: redraw [ 1.296000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.296000] fb0: VESA VGA frame buffer device [ 1.296000] isapnp: Scanning for PnP cards... [ 1.604000] isapnp: No Plug & Play device found [ 1.624000] Real Time Clock Driver v1.12ac [ 1.624000] hpet_resources: 0xfed00000 is busy [ 1.624000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.624000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.624000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.624000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.644000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.644000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.644000] mice: PS/2 mouse device common for all mice [ 1.644000] EISA: Probing bus 0 at eisa.0 [ 1.644000] Cannot allocate resource for EISA slot 1 [ 1.644000] Cannot allocate resource for EISA slot 2 [ 1.644000] Cannot allocate resource for EISA slot 3 [ 1.644000] Cannot allocate resource for EISA slot 4 [ 1.644000] EISA: Detected 0 cards. [ 1.644000] TCP cubic registered [ 1.644000] NET: Registered protocol family 1 [ 1.644000] Using IPI No-Shortcut mode [ 1.644000] Magic number: 7:785:570 [ 1.644000] hash matches device ptyb2 [ 1.644000] Freeing unused kernel memory: 364k freed [ 1.656000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.736000] Console: switching to colour frame buffer device 100x37 [ 2.896000] AppArmor: AppArmor initialized<5>audit(1190961344.616:2): type=1505 info="AppArmor initialized" pid=1349 [ 2.912000] fuse init (API version 7.8) [ 2.920000] Failure registering capabilities with primary security module. [ 2.956000] ACPI: Thermal Zone [THRM] (43 C) [ 3.532000] usbcore: registered new interface driver usbfs [ 3.532000] usbcore: registered new interface driver hub [ 3.532000] usbcore: registered new device driver usb [ 3.532000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.532000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 3.532000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 16 [ 3.532000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 3.532000] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 3.532000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 3.532000] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xc0004000 [ 3.556000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.556000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.580000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 3.588000] usb usb1: configuration #1 chosen from 1 choice [ 3.588000] hub 1-0:1.0: USB hub found [ 3.588000] hub 1-0:1.0: 8 ports detected [ 3.648000] SCSI subsystem initialized [ 3.652000] libata version 2.21 loaded. [ 3.692000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 3.692000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 16 [ 3.692000] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 3.692000] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 3.692000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 3.692000] ehci_hcd 0000:00:0b.1: debug port 1 [ 3.692000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 3.692000] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xc0005000 [ 3.692000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.692000] usb usb2: configuration #1 chosen from 1 choice [ 3.692000] hub 2-0:1.0: USB hub found [ 3.692000] hub 2-0:1.0: 8 ports detected [ 3.796000] sata_nv 0000:00:0e.0: version 3.4 [ 3.796000] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) [ 3.796000] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 3.796000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 17 [ 3.796000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 3.796000] scsi0 : sata_nv [ 3.796000] scsi1 : sata_nv [ 3.796000] ata1: SATA max UDMA/133 cmd 0x000130c0 ctl 0x000130b6 bmdma 0x00013090 irq 17 [ 3.796000] ata2: SATA max UDMA/133 cmd 0x000130b8 ctl 0x000130b2 bmdma 0x00013098 irq 17 [ 4.092000] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 4.236000] usb 2-4: configuration #1 chosen from 1 choice [ 4.264000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.272000] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100 [ 4.272000] ata1.00: 312581808 sectors, multi 16: LBA48 [ 4.280000] ata1.00: configured for UDMA/100 [ 4.600000] ata2: SATA link down (SStatus 0 SControl 300) [ 4.604000] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5 [ 4.604000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 4.604000] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 4.656000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[c8000000-c80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.660000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 4.660000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 18 [ 4.660000] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 4.660000] forcedeth: using HIGHDMA [ 5.184000] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0 [ 5.184000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 5.184000] NFORCE-MCP51: chipset revision 241 [ 5.184000] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 5.184000] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. [ 5.184000] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller [ 5.184000] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio [ 5.184000] Probing IDE interface ide0... [ 5.200000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.200000] sd 0:0:0:0: [sda] Write Protect is off [ 5.200000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.200000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.200000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.200000] sd 0:0:0:0: [sda] Write Protect is off [ 5.200000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.200000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.200000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 5.320000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.328000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.852000] Attempting manual resume [ 5.852000] swsusp: Resume From Partition 8:5 [ 5.852000] PM: Checking swsusp image. [ 5.852000] PM: Resume from disk failed. [ 5.892000] kjournald starting. Commit interval 5 seconds [ 5.892000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.920000] hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive [ 5.936000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0004561b00] [ 6.256000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 16.208000] usb 1-3: new full speed USB device using ohci_hcd and address 2 [ 16.436000] usb 1-3: configuration #1 chosen from 1 choice [ 18.260000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.260000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.404000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 18.404000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 18.500000] input: PC Speaker as /class/input/input2 [ 18.636000] ieee80211_crypt: registered algorithm 'NULL' [ 18.656000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 18.656000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 18.684000] Linux agpgart interface v0.102 (c) Dave Jones [ 18.772000] Bluetooth: Core ver 2.11 [ 18.772000] NET: Registered protocol family 31 [ 18.772000] Bluetooth: HCI device and connection manager initialized [ 18.772000] Bluetooth: HCI socket layer initialized [ 18.788000] Bluetooth: HCI USB driver ver 2.9 [ 18.800000] usbcore: registered new interface driver hci_usb [ 18.832000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA [ 18.832000] Uniform CD-ROM driver Revision: 3.20 [ 18.872000] Linux video capture interface: v2.00 [ 18.924000] bcm43xx driver [ 18.924000] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 18.924000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 18.924000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 18.960000] nvidia: module license 'NVIDIA' taints kernel. [ 19.216000] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16 [ 19.216000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK1E] -> GSI 16 (level, high) -> IRQ 20 [ 19.216000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 19.216000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 [ 19.216000] sdhci: Secure Digital Host Controller Interface driver [ 19.216000] sdhci: Copyright(c) Pierre Ossman [ 19.216000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19) [ 19.216000] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 19.216000] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 19.216000] mmc0: SDHCI at 0xc8000800 irq 7 DMA [ 19.264000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 19.264000] usbcore: registered new interface driver uvcvideo [ 19.264000] USB Video Class driver (v0.1.0) [ 19.472000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 19.472000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 19.472000] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 19.516000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 19.580000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 19.964000] lp: driver loaded but no devices found [ 20.204000] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k [ 20.836000] EXT3 FS on sda8, internal journal [ 22.548000] kjournald starting. Commit interval 5 seconds [ 22.552000] EXT3 FS on sda7, internal journal [ 22.552000] EXT3-fs: mounted filesystem with ordered data mode. [ 22.744000] kjournald starting. Commit interval 5 seconds [ 22.748000] EXT3 FS on sda6, internal journal [ 22.748000] EXT3-fs: mounted filesystem with ordered data mode. [ 22.776000] kjournald starting. Commit interval 5 seconds [ 22.776000] EXT3 FS on sda9, internal journal [ 22.776000] EXT3-fs: mounted filesystem with ordered data mode. [ 23.776000] NET: Registered protocol family 15 [ 24.808000] Initializing XFRM netlink socket [ 24.960000] NET: Registered protocol family 10 [ 24.960000] lo: Disabled Privacy Extensions [ 27.436000] usbcore: registered new interface driver hsfusbcd2 [ 27.636000] ACPI: Battery Slot [BAT0] (battery absent) [ 27.692000] ACPI: AC Adapter [ACAD] (on-line) [ 27.756000] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 27.760000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 27.776000] No dock devices found. [ 27.840000] input: Power Button (FF) as /class/input/input4 [ 27.844000] ACPI: Power Button (FF) [PWRF] [ 27.872000] input: Power Button (CM) as /class/input/input5 [ 27.872000] ACPI: Power Button (CM) [PWRB] [ 27.872000] input: Sleep Button (CM) as /class/input/input6 [ 27.872000] ACPI: Sleep Button (CM) [SLPB] [ 27.872000] input: Lid Switch as /class/input/input7 [ 27.872000] ACPI: Lid Switch [LID] [ 28.256000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (version 2.00.00) [ 28.256000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 [ 28.256000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 [ 28.256000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 [ 28.256000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 30.224000] eth0: no link during initialization. [ 30.224000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.780000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 35.800000] Failure registering capabilities with primary security module. [ 36.908000] ppdev: user-space parallel port driver [ 37.492000] audit(1190954179.639:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5863 profile="/usr/sbin/cupsd" [ 37.724000] apm: BIOS not found. [ 40.128000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 40.432000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 40.460000] NFSD: starting 90-second grace period [ 43.500000] Clocksource tsc unstable (delta = -300017256 ns) [ 46.060000] Failure registering capabilities with primary security module. [ 46.412000] Bluetooth: L2CAP ver 2.8 [ 46.412000] Bluetooth: L2CAP socket layer initialized [ 46.420000] Bluetooth: RFCOMM socket layer initialized [ 46.420000] Bluetooth: RFCOMM TTY layer initialized [ 46.420000] Bluetooth: RFCOMM ver 1.8 [ 267.416000] loop: module loaded [ 273.620000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 276.428000] NET: Registered protocol family 17 [ 276.584000] SoftMAC: Open Authentication completed with 00:1b:11:3e:d0:f6 [ 276.592000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 278.896000] SoftMAC: Open Authentication completed with 00:1b:11:3e:d0:f6 [ 296.128000] eth1: no IPv6 routers present [ 486.260000] tun: Universal TUN/TAP device driver, 1.6 [ 486.260000] tun: (C) 1999-2004 Max Krasnyansky [ 486.260000] tun: Disabled Privacy Extensions