[   54.911175] [drm] ib test on ring 0 succeeded in 0 usecs
[   54.911257] [drm] ib test on ring 3 succeeded in 0 usecs
[   55.181144] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   55.187988] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   55.567655] [drm] ib test on ring 5 succeeded
[   57.048049] r8169 0000:03:00.0 eth0: link up
[   62.495955] wlan0: authenticate with 20:4e:7f:24:79:60
[   62.500855] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[   62.539088] wlan0: authenticated
[   62.542746] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[   62.543687] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[   62.546668] wlan0: associated
[   64.041891] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[   64.041900] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[   64.041906] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[   80.141424] audit_printk_skb: 33 callbacks suppressed
[   80.141436] audit: type=1400 audit(1431959218.772:23): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=1935 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[   99.727591] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3660.515765] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3660.520489] cfg80211: Calling CRDA to update world regulatory domain
[ 3660.529491] cfg80211: World regulatory domain updated:
[ 3660.529499] cfg80211:  DFS Master region: unset
[ 3660.529502] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3660.529508] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3660.529513] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3660.529516] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3660.529520] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3660.529523] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3660.539041] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3660.721841] PM: Syncing filesystems ... done.
[ 3660.887466] PM: Preparing system for mem sleep
[ 3661.014000] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 3661.014012] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 3661.014021] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 3661.035695] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 3661.039779] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 3661.039881] radeon 0000:01:00.0: WB enabled
[ 3661.039885] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 3661.039888] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 3661.041114] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 3661.057406] [drm] ring test on 0 succeeded in 1 usecs
[ 3661.057414] [drm] ring test on 3 succeeded in 3 usecs
[ 3661.233207] [drm] ring test on 5 succeeded in 1 usecs
[ 3661.233212] [drm] UVD initialized successfully.
[ 3661.233250] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3661.233285] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3661.892987] [drm] ib test on ring 5 succeeded
[ 3661.911598] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 3661.914906] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3661.916522] PM: Entering mem sleep
[ 3661.916558] Suspending console(s) (use no_console_suspend to debug)
[ 3661.917246] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 3661.917317] sd 1:0:0:0: [sdb] Stopping disk
[ 3661.917377] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3661.917443] sd 0:0:0:0: [sda] Stopping disk
[ 3662.928250] PM: suspend of devices complete after 1012.001 msecs
[ 3662.944319] PM: late suspend of devices complete after 16.056 msecs
[ 3662.946435] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 3662.960342] PM: noirq suspend of devices complete after 16.029 msecs
[ 3662.960750] ACPI: Preparing to enter system sleep state S3
[ 3662.984117] PM: Saving platform NVS memory
[ 3662.984122] Disabling non-boot CPUs ...
[ 3662.984154] intel_pstate CPU 1 exiting
[ 3662.984465] Broke affinity for irq 35
[ 3662.985485] kvm: disabling virtualization on CPU1
[ 3662.985496] smpboot: CPU 1 is now offline
[ 3662.986349] intel_pstate CPU 2 exiting
[ 3662.987666] kvm: disabling virtualization on CPU2
[ 3662.987676] smpboot: CPU 2 is now offline
[ 3662.988504] intel_pstate CPU 3 exiting
[ 3662.988718] Broke affinity for irq 16
[ 3662.988728] Broke affinity for irq 23
[ 3662.988735] Broke affinity for irq 25
[ 3662.988756] Broke affinity for irq 31
[ 3662.989771] kvm: disabling virtualization on CPU3
[ 3662.989784] smpboot: CPU 3 is now offline
[ 3662.991742] ACPI: Low-level resume complete
[ 3662.991794] PM: Restoring platform NVS memory
[ 3662.992183] Enabling non-boot CPUs ...
[ 3662.992236] x86: Booting SMP configuration:
[ 3662.992237] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3663.003604] Disabled fast string operations
[ 3663.003660] kvm: enabling virtualization on CPU1
[ 3663.006146] CPU1 is up
[ 3663.006177] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3663.017129] Disabled fast string operations
[ 3663.017180] kvm: enabling virtualization on CPU2
[ 3663.019521] CPU2 is up
[ 3663.019554] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3663.030509] Disabled fast string operations
[ 3663.030563] kvm: enabling virtualization on CPU3
[ 3663.032951] CPU3 is up
[ 3663.045820] ACPI : EC: 2 stale EC events cleared
[ 3663.045835] ACPI: Waking up from system sleep state S3
[ 3663.231544] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[ 3663.231766] PM: noirq resume of devices complete after 18.012 msecs
[ 3663.232304] PM: early resume of devices complete after 0.496 msecs
[ 3663.232595] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 3663.232720] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 3663.240062] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 3663.244744] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 3663.244849] radeon 0000:01:00.0: WB enabled
[ 3663.244853] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 3663.244855] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 3663.246075] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 3663.253336] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 3663.262485] [drm] ring test on 0 succeeded in 1 usecs
[ 3663.262492] [drm] ring test on 3 succeeded in 3 usecs
[ 3663.263963] sd 0:0:0:0: [sda] Starting disk
[ 3663.263984] sd 1:0:0:0: [sdb] Starting disk
[ 3663.448277] [drm] ring test on 5 succeeded in 1 usecs
[ 3663.448290] [drm] UVD initialized successfully.
[ 3663.448358] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3663.448423] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3663.449907] r8169 0000:03:00.0 eth0: link down
[ 3663.473617] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
[ 3663.473638] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[ 3663.589465] ata5: SATA link down (SStatus 0 SControl 300)
[ 3663.605450] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3663.605473] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3663.605490] ata4: SATA link down (SStatus 0 SControl 300)
[ 3663.607699] ata2.00: configured for UDMA/133
[ 3663.620628] ata3.00: configured for UDMA/100
[ 3663.637691] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[ 3663.666435] usb 1-2: reset low-speed USB device number 2 using xhci_hcd
[ 3663.973002] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b7ed7e40
[ 3663.973019] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3664.105247] [drm] ib test on ring 5 succeeded
[ 3664.116762] PM: resume of devices complete after 885.060 msecs
[ 3664.125219] PM: Finishing wakeup.
[ 3664.125222] Restarting tasks ... done.
[ 3664.142291] video LNXVIDEO:00: Restoring backlight state
[ 3664.142508] video LNXVIDEO:01: Restoring backlight state
[ 3664.299910] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3666.355580] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3666.368383] ata1.00: configured for UDMA/133
[ 3666.749409] r8169 0000:03:00.0 eth0: link down
[ 3666.749491] r8169 0000:03:00.0 eth0: link down
[ 3666.750648] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 3666.757494] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 3669.573535] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 3669.573544] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 3669.573550] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 3669.672116] r8169 0000:03:00.0 eth0: link up
[ 3673.392779] wlan0: authenticate with 20:4e:7f:24:79:60
[ 3673.395271] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[ 3673.417257] wlan0: authenticated
[ 3673.418777] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[ 3673.419615] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[ 3673.421803] wlan0: associated
[ 4609.861877] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4609.867679] cfg80211: Calling CRDA to update world regulatory domain
[ 4609.875017] cfg80211: World regulatory domain updated:
[ 4609.875028] cfg80211:  DFS Master region: unset
[ 4609.875032] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4609.875042] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4609.875049] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4609.875056] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4609.875062] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4609.875067] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4609.887211] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4610.013303] PM: Syncing filesystems ... done.
[ 4610.199382] PM: Preparing system for mem sleep
[ 4610.309999] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 4610.310010] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 4610.310019] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 4610.331919] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 4610.336147] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 4610.336251] radeon 0000:01:00.0: WB enabled
[ 4610.336256] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 4610.336259] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 4610.337504] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 4610.353697] [drm] ring test on 0 succeeded in 1 usecs
[ 4610.353705] [drm] ring test on 3 succeeded in 3 usecs
[ 4610.529514] [drm] ring test on 5 succeeded in 1 usecs
[ 4610.529520] [drm] UVD initialized successfully.
[ 4610.529555] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4610.529596] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4611.188980] [drm] ib test on ring 5 succeeded
[ 4611.198702] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4611.201646] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4611.203142] PM: Entering mem sleep
[ 4611.203169] Suspending console(s) (use no_console_suspend to debug)
[ 4611.203669] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 4611.203731] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4611.203737] sd 1:0:0:0: [sdb] Stopping disk
[ 4611.203790] sd 0:0:0:0: [sda] Stopping disk
[ 4612.260267] PM: suspend of devices complete after 1057.587 msecs
[ 4612.276162] PM: late suspend of devices complete after 15.893 msecs
[ 4612.278206] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 4612.292352] PM: noirq suspend of devices complete after 16.195 msecs
[ 4612.292951] ACPI: Preparing to enter system sleep state S3
[ 4612.316195] PM: Saving platform NVS memory
[ 4612.316208] Disabling non-boot CPUs ...
[ 4612.316287] intel_pstate CPU 1 exiting
[ 4612.317804] kvm: disabling virtualization on CPU1
[ 4612.317827] smpboot: CPU 1 is now offline
[ 4612.319139] intel_pstate CPU 2 exiting
[ 4612.320572] kvm: disabling virtualization on CPU2
[ 4612.321257] smpboot: CPU 2 is now offline
[ 4612.321871] intel_pstate CPU 3 exiting
[ 4612.322165] Broke affinity for irq 23
[ 4612.322172] Broke affinity for irq 25
[ 4612.322194] Broke affinity for irq 31
[ 4612.323220] kvm: disabling virtualization on CPU3
[ 4612.323228] smpboot: CPU 3 is now offline
[ 4612.325430] ACPI: Low-level resume complete
[ 4612.325480] PM: Restoring platform NVS memory
[ 4612.325867] Enabling non-boot CPUs ...
[ 4612.325920] x86: Booting SMP configuration:
[ 4612.325921] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4612.337289] Disabled fast string operations
[ 4612.337343] kvm: enabling virtualization on CPU1
[ 4612.339937] CPU1 is up
[ 4612.339968] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4612.350920] Disabled fast string operations
[ 4612.350973] kvm: enabling virtualization on CPU2
[ 4612.353308] CPU2 is up
[ 4612.353340] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4612.364296] Disabled fast string operations
[ 4612.364349] kvm: enabling virtualization on CPU3
[ 4612.366762] CPU3 is up
[ 4612.401951] ACPI : EC: 7 stale EC events cleared
[ 4612.401965] ACPI: Waking up from system sleep state S3
[ 4612.650160] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[ 4612.651317] PM: noirq resume of devices complete after 17.446 msecs
[ 4612.652943] PM: early resume of devices complete after 1.584 msecs
[ 4612.653845] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 4612.654085] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 4612.660010] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 4612.664700] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 4612.664806] radeon 0000:01:00.0: WB enabled
[ 4612.664810] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 4612.664812] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 4612.666031] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 4612.676869] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 4612.681580] sd 0:0:0:0: [sda] Starting disk
[ 4612.681598] sd 1:0:0:0: [sdb] Starting disk
[ 4612.682341] [drm] ring test on 0 succeeded in 1 usecs
[ 4612.682347] [drm] ring test on 3 succeeded in 3 usecs
[ 4612.858164] [drm] ring test on 5 succeeded in 1 usecs
[ 4612.858169] [drm] UVD initialized successfully.
[ 4612.858249] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4612.858316] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4612.859810] r8169 0000:03:00.0 eth0: link down
[ 4612.885723] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[ 4612.885763] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[ 4613.017531] ata5: SATA link down (SStatus 0 SControl 300)
[ 4613.017555] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4613.017579] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4613.019874] ata2.00: configured for UDMA/133
[ 4613.025561] ata4: SATA link down (SStatus 0 SControl 300)
[ 4613.032721] ata3.00: configured for UDMA/100
[ 4613.049678] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
[ 4613.090494] usb 1-2: reset low-speed USB device number 2 using xhci_hcd
[ 4613.142347] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[ 4613.142358] PM: Device 3-1.2 failed to resume async: error -32
[ 4613.397208] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b7ed7e40
[ 4613.397228] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4613.517317] [drm] ib test on ring 5 succeeded
[ 4613.529119] PM: resume of devices complete after 876.787 msecs
[ 4613.536688] PM: Finishing wakeup.
[ 4613.536692] Restarting tasks ... 
[ 4613.536906] usb 3-1.2: USB disconnect, device number 3
[ 4613.550492] done.
[ 4613.569408] video LNXVIDEO:00: Restoring backlight state
[ 4613.569588] video LNXVIDEO:01: Restoring backlight state
[ 4613.739578] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4615.703731] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4615.716709] ata1.00: configured for UDMA/133
[ 4615.831622] usb 3-1.2: new high-speed USB device number 5 using ehci-pci
[ 4615.924327] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[ 4615.924331] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4615.924333] usb 3-1.2: Product: Cruzer Fit
[ 4615.924335] usb 3-1.2: Manufacturer: SanDisk
[ 4615.924337] usb 3-1.2: SerialNumber: 4C530007570515117331
[ 4615.924886] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 4615.924967] scsi host7: usb-storage 3-1.2:1.0
[ 4616.015565] Buffer I/O error on dev sdc2, logical block 65536, lost sync page write
[ 4616.015571] JBD2: Error -5 detected when updating journal superblock for sdc2-8.
[ 4616.209377] r8169 0000:03:00.0 eth0: link down
[ 4616.209395] r8169 0000:03:00.0 eth0: link down
[ 4616.210223] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 4616.217069] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 4616.924532] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[ 4616.925295] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 4616.926880] sd 7:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 4616.928492] sd 7:0:0:0: [sdc] Write Protect is off
[ 4616.928505] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4616.929483] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4616.942977]  sdc: sdc1 sdc2 sdc3
[ 4616.946979] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4618.941605] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 4618.941613] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 4618.941618] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 4619.166440] r8169 0000:03:00.0 eth0: link up
[ 4622.727160] wlan0: authenticate with 20:4e:7f:24:79:60
[ 4622.729953] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[ 4622.755131] wlan0: authenticated
[ 4622.758667] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[ 4622.759553] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[ 4622.761810] wlan0: associated
[ 5619.169960] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5619.174343] cfg80211: Calling CRDA to update world regulatory domain
[ 5619.182505] cfg80211: World regulatory domain updated:
[ 5619.182517] cfg80211:  DFS Master region: unset
[ 5619.182521] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5619.182531] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5619.182537] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5619.182543] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5619.182549] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5619.182555] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5619.193812] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5619.289769] PM: Syncing filesystems ... done.
[ 5619.468592] PM: Preparing system for mem sleep
[ 5619.603188] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 5619.603203] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 5619.603216] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 5619.624745] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 5619.628864] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 5619.628966] radeon 0000:01:00.0: WB enabled
[ 5619.628971] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 5619.628974] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 5619.630206] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 5619.646546] [drm] ring test on 0 succeeded in 1 usecs
[ 5619.646554] [drm] ring test on 3 succeeded in 3 usecs
[ 5619.832279] [drm] ring test on 5 succeeded in 1 usecs
[ 5619.832284] [drm] UVD initialized successfully.
[ 5619.832320] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5619.832350] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5620.489995] [drm] ib test on ring 5 succeeded
[ 5620.500669] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 5620.503877] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5620.505421] PM: Entering mem sleep
[ 5620.505454] Suspending console(s) (use no_console_suspend to debug)
[ 5620.506150] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5620.506224] sd 1:0:0:0: [sdb] Stopping disk
[ 5620.506297] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5620.506360] sd 0:0:0:0: [sda] Stopping disk
[ 5621.509232] PM: suspend of devices complete after 1004.118 msecs
[ 5621.525254] PM: late suspend of devices complete after 16.019 msecs
[ 5621.526409] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 5621.541428] PM: noirq suspend of devices complete after 16.178 msecs
[ 5621.541968] ACPI: Preparing to enter system sleep state S3
[ 5621.565271] PM: Saving platform NVS memory
[ 5621.565284] Disabling non-boot CPUs ...
[ 5621.565364] intel_pstate CPU 1 exiting
[ 5621.566887] kvm: disabling virtualization on CPU1
[ 5621.567459] smpboot: CPU 1 is now offline
[ 5621.568210] intel_pstate CPU 2 exiting
[ 5621.569631] kvm: disabling virtualization on CPU2
[ 5621.570362] smpboot: CPU 2 is now offline
[ 5621.571066] intel_pstate CPU 3 exiting
[ 5621.572418] kvm: disabling virtualization on CPU3
[ 5621.572431] smpboot: CPU 3 is now offline
[ 5621.574737] ACPI: Low-level resume complete
[ 5621.574785] PM: Restoring platform NVS memory
[ 5621.575180] Enabling non-boot CPUs ...
[ 5621.575233] x86: Booting SMP configuration:
[ 5621.575234] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5621.586191] Disabled fast string operations
[ 5621.586247] kvm: enabling virtualization on CPU1
[ 5621.588608] CPU1 is up
[ 5621.588639] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5621.599591] Disabled fast string operations
[ 5621.599640] kvm: enabling virtualization on CPU2
[ 5621.601973] CPU2 is up
[ 5621.602003] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5621.612957] Disabled fast string operations
[ 5621.613010] kvm: enabling virtualization on CPU3
[ 5621.615414] CPU3 is up
[ 5621.635113] ACPI : EC: 3 stale EC events cleared
[ 5621.635128] ACPI: Waking up from system sleep state S3
[ 5622.572468] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[ 5622.572796] PM: noirq resume of devices complete after 18.080 msecs
[ 5622.573607] PM: early resume of devices complete after 0.747 msecs
[ 5622.574664] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 5622.574757] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 5622.583900] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 5622.588894] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 5622.589003] radeon 0000:01:00.0: WB enabled
[ 5622.589007] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 5622.589009] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 5622.590224] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 5622.590743] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 5622.597612] sd 0:0:0:0: [sda] Starting disk
[ 5622.597633] sd 1:0:0:0: [sdb] Starting disk
[ 5622.606654] [drm] ring test on 0 succeeded in 1 usecs
[ 5622.606660] [drm] ring test on 3 succeeded in 3 usecs
[ 5622.790355] usb 3-1.2: reset high-speed USB device number 5 using ehci-pci
[ 5622.790392] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[ 5622.792402] [drm] ring test on 5 succeeded in 1 usecs
[ 5622.792407] [drm] UVD initialized successfully.
[ 5622.792484] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5622.792551] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5622.794026] r8169 0000:03:00.0 eth0: link down
[ 5622.934221] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5622.934242] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5622.934259] ata4: SATA link down (SStatus 0 SControl 300)
[ 5622.936344] ata2.00: configured for UDMA/133
[ 5622.942214] ata5: SATA link down (SStatus 0 SControl 300)
[ 5622.949213] ata3.00: configured for UDMA/100
[ 5622.954443] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[ 5623.450050] [drm] ib test on ring 5 succeeded
[ 5623.461701] PM: resume of devices complete after 888.700 msecs
[ 5623.469423] PM: Finishing wakeup.
[ 5623.469426] Restarting tasks ... 
[ 5623.477970] usb 1-2: USB disconnect, device number 2
[ 5623.478242] done.
[ 5623.500008] video LNXVIDEO:00: Restoring backlight state
[ 5623.500144] video LNXVIDEO:01: Restoring backlight state
[ 5623.659011] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5624.944931] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5624.958185] ata1.00: configured for UDMA/133
[ 5625.270780] r8169 0000:03:00.0 eth0: link down
[ 5625.271949] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 5625.278744] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 5629.238122] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 5629.238130] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 5629.238136] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 5631.937116] wlan0: authenticate with 20:4e:7f:24:79:60
[ 5631.939777] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[ 5631.974687] wlan0: authenticated
[ 5631.976017] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[ 5631.976900] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[ 5631.979543] wlan0: associated
[ 5666.827788] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 5666.827797] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 5666.827805] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 5666.846336] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 5666.850141] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 5666.850234] radeon 0000:01:00.0: WB enabled
[ 5666.850238] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[ 5666.850240] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[ 5666.851467] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[ 5666.867677] [drm] ring test on 0 succeeded in 1 usecs
[ 5666.867687] [drm] ring test on 3 succeeded in 3 usecs
[ 5667.063366] [drm] ring test on 5 succeeded in 1 usecs
[ 5667.063374] [drm] UVD initialized successfully.
[ 5667.063421] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5667.063452] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5667.719914] [drm] ib test on ring 5 succeeded
[ 5669.807496] audit: type=1400 audit(1431965578.101:24): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=5805 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[ 5673.287399] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 5673.287408] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[ 5673.287414] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[ 5702.048182] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6826.249550] cfg80211: Calling CRDA to update world regulatory domain
[ 6826.255053] cfg80211: World regulatory domain updated:
[ 6826.255062] cfg80211:  DFS Master region: unset
[ 6826.255065] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6826.255071] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6826.255076] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6826.255080] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6826.255084] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6826.255087] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6829.612755] wlan0: authenticate with 20:4e:7f:24:79:60
[ 6829.614863] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[ 6829.645881] wlan0: authenticated
[ 6829.646924] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[ 6829.647776] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[ 6829.650028] wlan0: associated
[ 7076.132573] cfg80211: Calling CRDA to update world regulatory domain
[ 7076.138614] cfg80211: World regulatory domain updated:
[ 7076.138623] cfg80211:  DFS Master region: unset
[ 7076.138626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7076.138632] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7076.138637] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7076.138641] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7076.138644] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7076.138647] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7079.503206] wlan0: authenticate with 20:4e:7f:24:79:60
[ 7079.505239] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[ 7079.535801] wlan0: authenticated
[ 7079.537805] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[ 7079.538669] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[ 7079.540829] wlan0: associated
[ 7126.194270] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[10470.349073] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15122.601532] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[15122.605619] cfg80211: Calling CRDA to update world regulatory domain
[15122.613784] cfg80211: World regulatory domain updated:
[15122.613791] cfg80211:  DFS Master region: unset
[15122.613794] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[15122.613800] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[15122.613805] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[15122.613809] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[15122.613813] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[15122.613817] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[15122.623324] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15127.502888] PM: Syncing filesystems ... done.
[15128.062660] PM: Preparing system for mem sleep
[15128.169237] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[15128.169254] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[15128.169270] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[15128.190639] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[15128.194795] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[15128.194898] radeon 0000:01:00.0: WB enabled
[15128.194903] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[15128.194906] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[15128.196130] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[15128.212434] [drm] ring test on 0 succeeded in 1 usecs
[15128.212443] [drm] ring test on 3 succeeded in 3 usecs
[15128.388243] [drm] ring test on 5 succeeded in 1 usecs
[15128.388250] [drm] UVD initialized successfully.
[15128.388286] [drm] ib test on ring 0 succeeded in 0 usecs
[15128.388320] [drm] ib test on ring 3 succeeded in 0 usecs
[15129.055916] [drm] ib test on ring 5 succeeded
[15129.066207] Freezing user space processes ... (elapsed 0.003 seconds) done.
[15129.069608] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15129.071018] PM: Entering mem sleep
[15129.071044] Suspending console(s) (use no_console_suspend to debug)
[15129.071538] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[15129.071576] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15129.071608] sd 1:0:0:0: [sdb] Stopping disk
[15129.071645] sd 0:0:0:0: [sda] Stopping disk
[15130.139100] PM: suspend of devices complete after 1068.553 msecs
[15130.155130] PM: late suspend of devices complete after 16.031 msecs
[15130.156097] r8169 0000:03:00.0: System wakeup enabled by ACPI
[15130.171315] PM: noirq suspend of devices complete after 16.190 msecs
[15130.171775] ACPI: Preparing to enter system sleep state S3
[15130.195188] PM: Saving platform NVS memory
[15130.195200] Disabling non-boot CPUs ...
[15130.195258] intel_pstate CPU 1 exiting
[15130.196746] kvm: disabling virtualization on CPU1
[15130.197448] smpboot: CPU 1 is now offline
[15130.198203] intel_pstate CPU 2 exiting
[15130.199650] kvm: disabling virtualization on CPU2
[15130.200384] smpboot: CPU 2 is now offline
[15130.201071] intel_pstate CPU 3 exiting
[15130.201399] Broke affinity for irq 16
[15130.201409] Broke affinity for irq 23
[15130.202460] kvm: disabling virtualization on CPU3
[15130.202472] smpboot: CPU 3 is now offline
[15130.204708] ACPI: Low-level resume complete
[15130.204759] PM: Restoring platform NVS memory
[15130.205165] Enabling non-boot CPUs ...
[15130.205220] x86: Booting SMP configuration:
[15130.205221] smpboot: Booting Node 0 Processor 1 APIC 0x1
[15130.216588] Disabled fast string operations
[15130.216642] kvm: enabling virtualization on CPU1
[15130.219226] CPU1 is up
[15130.219256] smpboot: Booting Node 0 Processor 2 APIC 0x2
[15130.230209] Disabled fast string operations
[15130.230259] kvm: enabling virtualization on CPU2
[15130.232599] CPU2 is up
[15130.232630] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15130.243584] Disabled fast string operations
[15130.243635] kvm: enabling virtualization on CPU3
[15130.246037] CPU3 is up
[15130.276923] ACPI : EC: 6 stale EC events cleared
[15130.276937] ACPI: Waking up from system sleep state S3
[15130.525142] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[15130.526734] PM: noirq resume of devices complete after 17.921 msecs
[15130.527225] PM: early resume of devices complete after 0.448 msecs
[15130.529074] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[15130.529078] r8169 0000:03:00.0: System wakeup disabled by ACPI
[15130.534968] sd 0:0:0:0: [sda] Starting disk
[15130.534991] sd 1:0:0:0: [sdb] Starting disk
[15130.536438] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[15130.540423] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[15130.540527] radeon 0000:01:00.0: WB enabled
[15130.540530] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[15130.540532] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[15130.541753] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[15130.558042] [drm] ring test on 0 succeeded in 1 usecs
[15130.558048] [drm] ring test on 3 succeeded in 3 usecs
[15130.642082] rtc_cmos 00:01: System wakeup disabled by ACPI
[15130.733862] [drm] ring test on 5 succeeded in 1 usecs
[15130.733867] [drm] UVD initialized successfully.
[15130.733947] [drm] ib test on ring 0 succeeded in 0 usecs
[15130.734014] [drm] ib test on ring 3 succeeded in 0 usecs
[15130.735504] r8169 0000:03:00.0 eth0: link down
[15130.744734] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[15130.744751] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[15130.876520] ata5: SATA link down (SStatus 0 SControl 300)
[15130.876542] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15130.876560] ata4: SATA link down (SStatus 0 SControl 300)
[15130.884581] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15130.891714] ata2.00: configured for UDMA/133
[15130.899734] ata3.00: configured for UDMA/100
[15130.908584] usb 3-1.2: reset high-speed USB device number 5 using ehci-pci
[15131.001463] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[15131.001477] PM: Device 3-1.2 failed to resume async: error -32
[15131.380270] [drm] ib test on ring 5 succeeded
[15131.390895] PM: resume of devices complete after 864.263 msecs
[15131.394897] PM: Finishing wakeup.
[15131.394899] Restarting tasks ... 
[15131.399991] usb 3-1.2: USB disconnect, device number 5
[15131.400250] done.
[15131.403255] video LNXVIDEO:00: Restoring backlight state
[15131.403401] video LNXVIDEO:01: Restoring backlight state
[15131.478826] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[15131.586139] r8169 0000:03:00.0 eth0: link down
[15131.587403] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[15131.594193] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[15133.570661] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15133.583337] ata1.00: configured for UDMA/133
[15133.694718] usb 3-1.2: new high-speed USB device number 6 using ehci-pci
[15133.791387] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[15133.791392] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15133.791394] usb 3-1.2: Product: Cruzer Fit
[15133.791396] usb 3-1.2: Manufacturer: SanDisk
[15133.791398] usb 3-1.2: SerialNumber: 4C530007570515117331
[15133.791716] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[15133.791888] scsi host8: usb-storage 3-1.2:1.0
[15134.790984] scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[15134.791831] sd 8:0:0:0: Attached scsi generic sg3 type 0
[15134.792693] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[15134.798943] sd 8:0:0:0: [sdc] Write Protect is off
[15134.798950] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[15134.799939] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15134.812373]  sdc: sdc1 sdc2 sdc3
[15134.818173] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[15136.672742] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[15136.672750] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[15136.672755] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[15138.392549] wlan0: authenticate with 20:4e:7f:24:79:60
[15138.394717] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[15138.431712] wlan0: authenticated
[15138.435365] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[15138.436307] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=2)
[15138.438809] wlan0: associated
[23206.249699] perf interrupt took too long (5038 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[28732.758724] cfg80211: Calling CRDA to update world regulatory domain
[28732.764611] cfg80211: World regulatory domain updated:
[28732.764619] cfg80211:  DFS Master region: unset
[28732.764621] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[28732.764627] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28732.764630] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28732.764633] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[28732.764636] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28732.764639] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28736.029728] wlan0: authenticate with 20:4e:7f:24:79:60
[28736.031784] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[28736.066039] wlan0: authenticated
[28736.068118] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[28736.075064] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[28736.077554] wlan0: associated
[28795.707183] cfg80211: Calling CRDA to update world regulatory domain
[28795.712152] cfg80211: World regulatory domain updated:
[28795.712161] cfg80211:  DFS Master region: unset
[28795.712164] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[28795.712171] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28795.712177] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28795.712182] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[28795.712186] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28795.712190] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28798.858663] wlan0: authenticate with 20:4e:7f:24:79:60
[28798.860746] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[28798.896749] wlan0: authenticated
[28798.900380] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[28798.907454] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[28798.910321] wlan0: associated
[28859.654547] cfg80211: Calling CRDA to update world regulatory domain
[28859.660288] cfg80211: World regulatory domain updated:
[28859.660297] cfg80211:  DFS Master region: unset
[28859.660300] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[28859.660306] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28859.660311] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28859.660315] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[28859.660318] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28859.660321] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[28862.917854] wlan0: authenticate with 20:4e:7f:24:79:60
[28862.919777] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[28862.955371] wlan0: authenticated
[28862.955890] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[28862.956948] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[28862.959327] wlan0: associated
[29699.128334] cfg80211: Calling CRDA to update world regulatory domain
[29699.134241] cfg80211: World regulatory domain updated:
[29699.134250] cfg80211:  DFS Master region: unset
[29699.134254] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[29699.134262] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[29699.134267] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[29699.134272] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[29699.134277] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[29699.134282] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[29702.438048] wlan0: authenticate with 20:4e:7f:24:79:60
[29702.440296] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[29702.480380] wlan0: send auth to 20:4e:7f:24:79:60 (try 2/3)
[29702.489437] wlan0: send auth to 20:4e:7f:24:79:60 (try 3/3)
[29702.496988] wlan0: authentication with 20:4e:7f:24:79:60 timed out
[29706.220764] wlan0: authenticate with 20:4e:7f:24:79:60
[29706.223474] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[29706.257927] wlan0: authenticated
[29706.259082] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[29706.259912] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[29706.262048] wlan0: associated
[31513.813982] cfg80211: Calling CRDA to update world regulatory domain
[31513.818960] cfg80211: World regulatory domain updated:
[31513.818968] cfg80211:  DFS Master region: unset
[31513.818971] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[31513.818977] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[31513.818981] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[31513.818984] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[31513.818987] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[31513.818990] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[31517.157365] wlan0: authenticate with 20:4e:7f:24:79:60
[31517.159702] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[31517.193155] wlan0: authenticated
[31517.195323] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[31517.196181] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[31517.198325] wlan0: associated
[32744.953886] cfg80211: Calling CRDA to update world regulatory domain
[32744.960038] cfg80211: World regulatory domain updated:
[32744.960048] cfg80211:  DFS Master region: unset
[32744.960053] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[32744.960061] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[32744.960068] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[32744.960073] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[32744.960078] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[32744.960084] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[32748.293847] wlan0: authenticate with 20:4e:7f:24:79:60
[32748.295895] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[32748.326519] wlan0: authenticated
[32748.327094] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[32748.327958] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[32748.330203] wlan0: associated
[34603.643964] cfg80211: Calling CRDA to update world regulatory domain
[34603.649375] cfg80211: World regulatory domain updated:
[34603.649382] cfg80211:  DFS Master region: unset
[34603.649385] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[34603.649391] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[34603.649395] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[34603.649398] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[34603.649401] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[34603.649404] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[34607.017473] wlan0: authenticate with 20:4e:7f:24:79:60
[34607.019437] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[34607.049417] wlan0: authenticated
[34607.053254] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[34607.054334] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[34607.056542] wlan0: associated
[37068.144863] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.144993] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.145263] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.145300] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.145750] pci_bus 0000:02: Allocating resources
[37068.145829] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[37068.145837] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[37068.145853] pci_bus 0000:03: Allocating resources
[37068.145879] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
[37068.145893] pci_bus 0000:04: Allocating resources
[37068.145917] pcieport 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[37068.145923] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[37068.145929] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.145941] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[37068.145946] pcieport 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[37068.145951] pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[37068.145956] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[37068.145960] pcieport 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[37068.145978] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xbfa00000-0xbfbfffff 64bit pref]
[37068.145985] pcieport 0000:00:1c.3: BAR 14: assigned [mem 0xbfc00000-0xbfffffff]
[37068.145995] pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xe0900000-0xe0afffff 64bit pref]
[37068.146005] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
[37068.146011] pcieport 0000:00:1c.4: BAR 13: assigned [io  0x7000-0x7fff]
[37068.146306] pci_bus 0000:01: Allocating resources
[37068.146356] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.146764] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[37068.263843] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[37068.276057] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[37068.276347] cfg80211: Calling CRDA to update world regulatory domain
[37068.281926] cfg80211: World regulatory domain updated:
[37068.281932] cfg80211:  DFS Master region: unset
[37068.281934] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[37068.281938] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[37068.281940] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[37068.281943] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[37068.281945] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[37068.281947] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[37069.542086] PM: Syncing filesystems ... done.
[37070.614945] PM: Preparing system for mem sleep
[37070.715374] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[37070.715394] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[37070.715411] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[37070.738519] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[37070.743479] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[37070.743596] radeon 0000:01:00.0: WB enabled
[37070.743602] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[37070.743607] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[37070.744831] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[37070.761278] [drm] ring test on 0 succeeded in 1 usecs
[37070.761289] [drm] ring test on 3 succeeded in 3 usecs
[37070.957067] [drm] ring test on 5 succeeded in 1 usecs
[37070.957075] [drm] UVD initialized successfully.
[37070.957132] [drm] ib test on ring 0 succeeded in 0 usecs
[37070.957184] [drm] ib test on ring 3 succeeded in 0 usecs
[37071.605936] [drm] ib test on ring 5 succeeded
[37071.620858] Freezing user space processes ... (elapsed 0.003 seconds) done.
[37071.624245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[37071.625669] PM: Entering mem sleep
[37071.625697] Suspending console(s) (use no_console_suspend to debug)
[37071.626277] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[37071.626279] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[37071.626359] sd 1:0:0:0: [sdb] Stopping disk
[37071.626368] sd 0:0:0:0: [sda] Stopping disk
[37072.713221] PM: suspend of devices complete after 1087.975 msecs
[37072.729201] PM: late suspend of devices complete after 15.977 msecs
[37072.731294] r8169 0000:03:00.0: System wakeup enabled by ACPI
[37072.745356] PM: noirq suspend of devices complete after 16.159 msecs
[37072.746018] ACPI: Preparing to enter system sleep state S3
[37072.769154] PM: Saving platform NVS memory
[37072.769165] Disabling non-boot CPUs ...
[37072.769238] intel_pstate CPU 1 exiting
[37072.770722] kvm: disabling virtualization on CPU1
[37072.770746] smpboot: CPU 1 is now offline
[37072.771491] intel_pstate CPU 2 exiting
[37072.772927] kvm: disabling virtualization on CPU2
[37072.773603] smpboot: CPU 2 is now offline
[37072.774179] intel_pstate CPU 3 exiting
[37072.774469] Broke affinity for irq 25
[37072.775509] kvm: disabling virtualization on CPU3
[37072.775516] smpboot: CPU 3 is now offline
[37072.777584] ACPI: Low-level resume complete
[37072.777634] PM: Restoring platform NVS memory
[37072.778028] Enabling non-boot CPUs ...
[37072.778079] x86: Booting SMP configuration:
[37072.778080] smpboot: Booting Node 0 Processor 1 APIC 0x1
[37072.789448] Disabled fast string operations
[37072.789502] kvm: enabling virtualization on CPU1
[37072.792093] CPU1 is up
[37072.792124] smpboot: Booting Node 0 Processor 2 APIC 0x2
[37072.803077] Disabled fast string operations
[37072.803128] kvm: enabling virtualization on CPU2
[37072.805461] CPU2 is up
[37072.805494] smpboot: Booting Node 0 Processor 3 APIC 0x3
[37072.816449] Disabled fast string operations
[37072.816501] kvm: enabling virtualization on CPU3
[37072.818912] CPU3 is up
[37072.830804] ACPI : EC: 1 stale EC events cleared
[37072.830819] ACPI: Waking up from system sleep state S3
[37072.920572] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[37072.920817] PM: noirq resume of devices complete after 17.882 msecs
[37072.921274] PM: early resume of devices complete after 0.417 msecs
[37072.921575] r8169 0000:03:00.0: System wakeup disabled by ACPI
[37072.938246] rtc_cmos 00:01: System wakeup disabled by ACPI
[37072.938286] sd 0:0:0:0: [sda] Starting disk
[37072.938328] sd 1:0:0:0: [sdb] Starting disk
[37072.945867] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[37072.949880] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[37072.949976] radeon 0000:01:00.0: WB enabled
[37072.949979] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[37072.949981] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[37072.951209] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[37072.967479] [drm] ring test on 0 succeeded in 1 usecs
[37072.967485] [drm] ring test on 3 succeeded in 3 usecs
[37073.025994] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[37073.138700] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[37073.138703] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[37073.143287] [drm] ring test on 5 succeeded in 1 usecs
[37073.143292] [drm] UVD initialized successfully.
[37073.143371] [drm] ib test on ring 0 succeeded in 0 usecs
[37073.143439] [drm] ib test on ring 3 succeeded in 0 usecs
[37073.144928] r8169 0000:03:00.0 eth0: link down
[37073.278512] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[37073.278534] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[37073.278555] ata5: SATA link down (SStatus 0 SControl 300)
[37073.280720] ata2.00: configured for UDMA/133
[37073.286500] ata4: SATA link down (SStatus 0 SControl 300)
[37073.293570] ata3.00: configured for UDMA/100
[37073.302572] usb 3-1.2: reset high-speed USB device number 6 using ehci-pci
[37073.399790] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[37073.399799] PM: Device 3-1.2 failed to resume async: error -32
[37073.802264] [drm] ib test on ring 5 succeeded
[37073.813150] PM: resume of devices complete after 892.489 msecs
[37073.817073] PM: Finishing wakeup.
[37073.817074] Restarting tasks ... 
[37073.830117] usb 3-1.2: USB disconnect, device number 6
[37073.835955] done.
[37073.842596] video LNXVIDEO:00: Restoring backlight state
[37073.842749] video LNXVIDEO:01: Restoring backlight state
[37073.896128] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[37074.020070] r8169 0000:03:00.0 eth0: link down
[37074.021957] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[37074.028851] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[37076.144554] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[37076.157230] ata1.00: configured for UDMA/133
[37076.260678] usb 3-1.2: new high-speed USB device number 7 using ehci-pci
[37076.353919] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[37076.353930] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[37076.353935] usb 3-1.2: Product: Cruzer Fit
[37076.353939] usb 3-1.2: Manufacturer: SanDisk
[37076.353944] usb 3-1.2: SerialNumber: 4C530007570515117331
[37076.354299] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[37076.354421] scsi host9: usb-storage 3-1.2:1.0
[37077.354295] scsi 9:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[37077.354727] sd 9:0:0:0: Attached scsi generic sg3 type 0
[37077.357412] sd 9:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[37077.359030] sd 9:0:0:0: [sdc] Write Protect is off
[37077.359036] sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
[37077.360025] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[37077.372929]  sdc: sdc1 sdc2 sdc3
[37077.376772] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[37079.058720] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[37079.058728] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[37079.058734] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[37080.655368] wlan0: authenticate with 20:4e:7f:24:79:60
[37080.657690] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[37080.693515] wlan0: authenticated
[37080.697565] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[37080.698394] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[37080.700562] wlan0: associated
[38460.440212] cfg80211: Calling CRDA to update world regulatory domain
[38460.443676] cfg80211: World regulatory domain updated:
[38460.443680] cfg80211:  DFS Master region: unset
[38460.443682] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[38460.443684] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[38460.443686] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[38460.443688] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[38460.443690] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[38460.443691] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[38463.747999] wlan0: authenticate with 20:4e:7f:24:79:60
[38463.749718] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[38463.787028] wlan0: authenticated
[38463.789919] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[38463.796157] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[38463.798893] wlan0: associated
[57809.001020] cfg80211: Calling CRDA to update world regulatory domain
[57809.007128] cfg80211: World regulatory domain updated:
[57809.007137] cfg80211:  DFS Master region: unset
[57809.007140] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[57809.007145] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57809.007150] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57809.007153] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[57809.007156] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57809.007159] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57812.348304] wlan0: authenticate with 20:4e:7f:24:79:60
[57812.350753] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[57812.381401] wlan0: authenticated
[57812.382497] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[57812.383344] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[57812.385548] wlan0: associated
[57942.939306] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[57942.950681] cfg80211: Calling CRDA to update world regulatory domain
[57942.958666] cfg80211: World regulatory domain updated:
[57942.958678] cfg80211:  DFS Master region: unset
[57942.958683] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[57942.958692] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57942.958699] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57942.958705] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[57942.958711] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57942.958716] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[57942.971042] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[57947.848421] PM: Syncing filesystems ... done.
[57948.308812] PM: Preparing system for mem sleep
[57948.417948] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[57948.417961] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[57948.417972] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[57948.440108] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[57948.444709] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[57948.444850] radeon 0000:01:00.0: WB enabled
[57948.444858] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[57948.444865] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[57948.446141] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[57948.462511] [drm] ring test on 0 succeeded in 1 usecs
[57948.462524] [drm] ring test on 3 succeeded in 3 usecs
[57948.648285] [drm] ring test on 5 succeeded in 1 usecs
[57948.648291] [drm] UVD initialized successfully.
[57948.648328] [drm] ib test on ring 0 succeeded in 0 usecs
[57948.648359] [drm] ib test on ring 3 succeeded in 0 usecs
[57949.304426] [drm] ib test on ring 5 succeeded
[57949.320344] Freezing user space processes ... (elapsed 0.003 seconds) done.
[57949.323501] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[57949.325001] PM: Entering mem sleep
[57949.325026] Suspending console(s) (use no_console_suspend to debug)
[57949.325439] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[57949.325511] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57949.325513] sd 1:0:0:0: [sdb] Stopping disk
[57949.325578] sd 0:0:0:0: [sda] Stopping disk
[57950.399714] PM: suspend of devices complete after 1075.197 msecs
[57950.415680] PM: late suspend of devices complete after 15.962 msecs
[57950.416954] r8169 0000:03:00.0: System wakeup enabled by ACPI
[57950.431860] PM: noirq suspend of devices complete after 16.182 msecs
[57950.432521] ACPI: Preparing to enter system sleep state S3
[57950.455675] PM: Saving platform NVS memory
[57950.455686] Disabling non-boot CPUs ...
[57950.455758] intel_pstate CPU 1 exiting
[57950.457222] kvm: disabling virtualization on CPU1
[57950.457246] smpboot: CPU 1 is now offline
[57950.457926] intel_pstate CPU 2 exiting
[57950.459360] kvm: disabling virtualization on CPU2
[57950.459387] smpboot: CPU 2 is now offline
[57950.460679] intel_pstate CPU 3 exiting
[57950.460980] Broke affinity for irq 16
[57950.460990] Broke affinity for irq 23
[57950.461018] Broke affinity for irq 31
[57950.462041] kvm: disabling virtualization on CPU3
[57950.462052] smpboot: CPU 3 is now offline
[57950.464168] ACPI: Low-level resume complete
[57950.464217] PM: Restoring platform NVS memory
[57950.464596] Enabling non-boot CPUs ...
[57950.464647] x86: Booting SMP configuration:
[57950.464649] smpboot: Booting Node 0 Processor 1 APIC 0x1
[57950.476018] Disabled fast string operations
[57950.476072] kvm: enabling virtualization on CPU1
[57950.478669] CPU1 is up
[57950.478699] smpboot: Booting Node 0 Processor 2 APIC 0x2
[57950.489652] Disabled fast string operations
[57950.489703] kvm: enabling virtualization on CPU2
[57950.492029] CPU2 is up
[57950.492062] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57950.503018] Disabled fast string operations
[57950.503069] kvm: enabling virtualization on CPU3
[57950.505473] CPU3 is up
[57950.513394] ACPI : EC: 0 stale EC events cleared
[57950.513405] ACPI: Waking up from system sleep state S3
[57950.579294] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[57950.579465] PM: noirq resume of devices complete after 17.926 msecs
[57950.579932] PM: early resume of devices complete after 0.423 msecs
[57950.580337] r8169 0000:03:00.0: System wakeup disabled by ACPI
[57950.585603] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[57950.593819] sd 0:0:0:0: [sda] Starting disk
[57950.593841] sd 1:0:0:0: [sdb] Starting disk
[57950.598233] rtc_cmos 00:01: System wakeup disabled by ACPI
[57950.603160] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[57950.607308] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[57950.607412] radeon 0000:01:00.0: WB enabled
[57950.607415] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[57950.607417] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[57950.608646] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[57950.625003] [drm] ring test on 0 succeeded in 1 usecs
[57950.625010] [drm] ring test on 3 succeeded in 3 usecs
[57950.805342] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[57950.805353] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[57950.810789] [drm] ring test on 5 succeeded in 1 usecs
[57950.810795] [drm] UVD initialized successfully.
[57950.810874] [drm] ib test on ring 0 succeeded in 0 usecs
[57950.810943] [drm] ib test on ring 3 succeeded in 0 usecs
[57950.812430] r8169 0000:03:00.0 eth0: link down
[57950.937095] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57950.937120] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57950.937139] ata4: SATA link down (SStatus 0 SControl 300)
[57950.939386] ata2.00: configured for UDMA/133
[57950.945087] ata5: SATA link down (SStatus 0 SControl 300)
[57950.952048] ata3.00: configured for UDMA/100
[57950.969218] usb 3-1.2: reset high-speed USB device number 7 using ehci-pci
[57951.062055] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[57951.062069] PM: Device 3-1.2 failed to resume async: error -32
[57951.468920] [drm] ib test on ring 5 succeeded
[57951.480305] PM: resume of devices complete after 900.984 msecs
[57951.489208] PM: Finishing wakeup.
[57951.489211] Restarting tasks ... 
[57951.496768] usb 3-1.2: USB disconnect, device number 7
[57951.498015] done.
[57951.509378] video LNXVIDEO:00: Restoring backlight state
[57951.509528] video LNXVIDEO:01: Restoring backlight state
[57951.572542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[57951.698670] r8169 0000:03:00.0 eth0: link down
[57951.699694] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[57951.706607] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[57953.827145] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[57953.839740] ata1.00: configured for UDMA/133
[57953.939200] usb 3-1.2: new high-speed USB device number 8 using ehci-pci
[57954.031869] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[57954.031874] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[57954.031876] usb 3-1.2: Product: Cruzer Fit
[57954.031878] usb 3-1.2: Manufacturer: SanDisk
[57954.031880] usb 3-1.2: SerialNumber: 4C530007570515117331
[57954.032186] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[57954.032321] scsi host10: usb-storage 3-1.2:1.0
[57955.031302] scsi 10:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[57955.031640] sd 10:0:0:0: Attached scsi generic sg3 type 0
[57955.032930] sd 10:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[57955.034798] sd 10:0:0:0: [sdc] Write Protect is off
[57955.034805] sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00
[57955.035798] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[57955.048743]  sdc: sdc1 sdc2 sdc3
[57955.052419] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[57956.989161] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[57956.989169] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[57956.989174] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[57958.131503] wlan0: authenticate with 20:4e:7f:24:79:60
[57958.135098] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[57958.169318] wlan0: authenticated
[57958.172148] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[57958.172991] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[57958.176058] wlan0: associated
[72720.633648] cfg80211: Calling CRDA to update world regulatory domain
[72720.643489] cfg80211: World regulatory domain updated:
[72720.643498] cfg80211:  DFS Master region: unset
[72720.643501] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[72720.643508] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72720.643513] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72720.643516] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[72720.643520] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72720.643523] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72723.970578] wlan0: authenticate with 20:4e:7f:24:79:60
[72723.972457] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[72724.003999] wlan0: authenticated
[72724.007037] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[72724.007899] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[72724.010030] wlan0: associated
[72960.463843] cfg80211: Calling CRDA to update world regulatory domain
[72960.469823] cfg80211: World regulatory domain updated:
[72960.469832] cfg80211:  DFS Master region: unset
[72960.469835] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[72960.469841] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72960.469846] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72960.469849] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[72960.469853] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72960.469856] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[72963.765645] wlan0: authenticate with 20:4e:7f:24:79:60
[72963.767986] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[72963.865736] wlan0: authenticated
[72963.869197] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[72963.870140] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[72963.872894] wlan0: associated
[74580.346956] cfg80211: Calling CRDA to update world regulatory domain
[74580.351904] cfg80211: World regulatory domain updated:
[74580.351910] cfg80211:  DFS Master region: unset
[74580.351912] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[74580.351917] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74580.351920] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74580.351923] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[74580.351926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74580.351928] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74583.716714] wlan0: authenticate with 20:4e:7f:24:79:60
[74583.718563] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[74583.750400] wlan0: authenticated
[74583.752174] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[74583.753003] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[74583.755174] wlan0: associated
[74700.175959] cfg80211: Calling CRDA to update world regulatory domain
[74700.182159] cfg80211: World regulatory domain updated:
[74700.182169] cfg80211:  DFS Master region: unset
[74700.182173] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[74700.182180] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74700.182186] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74700.182191] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[74700.182194] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74700.182199] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74703.478924] wlan0: authenticate with 20:4e:7f:24:79:60
[74703.480968] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[74703.579049] wlan0: authenticated
[74703.581226] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[74703.586495] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[74703.588747] wlan0: associated
[74760.162812] cfg80211: Calling CRDA to update world regulatory domain
[74760.168701] cfg80211: World regulatory domain updated:
[74760.168710] cfg80211:  DFS Master region: unset
[74760.168713] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[74760.168720] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74760.168724] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74760.168728] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[74760.168732] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74760.168735] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[74763.509017] wlan0: authenticate with 20:4e:7f:24:79:60
[74763.510986] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[74763.544499] wlan0: authenticated
[74763.547691] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[74763.554144] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[74763.556538] wlan0: associated
[77447.893528] audit: type=1400 audit(1432060940.377:25): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27657 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77447.893537] audit: type=1400 audit(1432060940.377:26): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27657 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77476.328467] audit: type=1400 audit(1432060968.828:27): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27713 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77476.328481] audit: type=1400 audit(1432060968.828:28): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27713 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77576.929509] audit: type=1400 audit(1432061069.499:29): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27940 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77576.929534] audit: type=1400 audit(1432061069.499:30): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=27940 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77623.891640] audit: type=1400 audit(1432061116.494:31): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=28040 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77623.891654] audit: type=1400 audit(1432061116.494:32): apparmor="DENIED" operation="file_perm" info="Failed name lookup - deleted entry" error=-13 profile="/usr/sbin/cupsd" name="/var/run/avahi-daemon/socket" pid=28040 comm="ipps" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[77691.365441] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[77691.365456] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[77691.365468] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[77691.387344] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[77691.392159] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[77691.392275] radeon 0000:01:00.0: WB enabled
[77691.392281] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[77691.392285] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[77691.393517] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[77691.409914] [drm] ring test on 0 succeeded in 1 usecs
[77691.409925] [drm] ring test on 3 succeeded in 3 usecs
[77691.595723] [drm] ring test on 5 succeeded in 1 usecs
[77691.595731] [drm] UVD initialized successfully.
[77691.595778] [drm] ib test on ring 0 succeeded in 0 usecs
[77691.595809] [drm] ib test on ring 3 succeeded in 0 usecs
[77692.263290] [drm] ib test on ring 5 succeeded
[77698.243179] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[77698.243191] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[77698.243200] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[77708.697400] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.697599] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.697738] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.697790] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.698290] pci_bus 0000:02: Allocating resources
[77708.698379] pci_bus 0000:03: Allocating resources
[77708.698418] pci_bus 0000:04: Allocating resources
[77708.698450] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.698760] pci_bus 0000:01: Allocating resources
[77708.698809] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77708.699202] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[77709.434090] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[77709.443165] cfg80211: Calling CRDA to update world regulatory domain
[77709.446461] cfg80211: World regulatory domain updated:
[77709.446466] cfg80211:  DFS Master region: unset
[77709.446468] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[77709.446472] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[77709.446475] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[77709.446478] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[77709.446481] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[77709.446483] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[77709.449088] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[77709.624157] PM: Syncing filesystems ... done.
[77710.508669] PM: Preparing system for mem sleep
[77710.599153] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[77710.599168] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[77710.599182] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[77710.621279] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[77710.625720] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[77710.625829] radeon 0000:01:00.0: WB enabled
[77710.625834] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[77710.625838] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[77710.627093] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[77710.643431] [drm] ring test on 0 succeeded in 1 usecs
[77710.643439] [drm] ring test on 3 succeeded in 3 usecs
[77710.839117] [drm] ring test on 5 succeeded in 1 usecs
[77710.839122] [drm] UVD initialized successfully.
[77710.839158] [drm] ib test on ring 0 succeeded in 0 usecs
[77710.839199] [drm] ib test on ring 3 succeeded in 0 usecs
[77711.485993] [drm] ib test on ring 5 succeeded
[77711.498381] Freezing user space processes ... (elapsed 0.002 seconds) done.
[77711.501077] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[77711.502576] PM: Entering mem sleep
[77711.502605] Suspending console(s) (use no_console_suspend to debug)
[77711.503119] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[77711.503121] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[77711.503202] sd 0:0:0:0: [sda] Stopping disk
[77711.503225] sd 1:0:0:0: [sdb] Stopping disk
[77712.517304] PM: suspend of devices complete after 1015.132 msecs
[77712.533275] PM: late suspend of devices complete after 15.967 msecs
[77712.534520] r8169 0000:03:00.0: System wakeup enabled by ACPI
[77712.549416] PM: noirq suspend of devices complete after 16.146 msecs
[77712.550078] ACPI: Preparing to enter system sleep state S3
[77712.573237] PM: Saving platform NVS memory
[77712.573249] Disabling non-boot CPUs ...
[77712.573330] intel_pstate CPU 1 exiting
[77712.574851] kvm: disabling virtualization on CPU1
[77712.574873] smpboot: CPU 1 is now offline
[77712.576255] intel_pstate CPU 2 exiting
[77712.577675] kvm: disabling virtualization on CPU2
[77712.578396] smpboot: CPU 2 is now offline
[77712.579125] intel_pstate CPU 3 exiting
[77712.579427] Broke affinity for irq 25
[77712.580470] kvm: disabling virtualization on CPU3
[77712.580480] smpboot: CPU 3 is now offline
[77712.582771] ACPI: Low-level resume complete
[77712.582822] PM: Restoring platform NVS memory
[77712.583206] Enabling non-boot CPUs ...
[77712.583261] x86: Booting SMP configuration:
[77712.583262] smpboot: Booting Node 0 Processor 1 APIC 0x1
[77712.594630] Disabled fast string operations
[77712.594684] kvm: enabling virtualization on CPU1
[77712.597265] CPU1 is up
[77712.597294] smpboot: Booting Node 0 Processor 2 APIC 0x2
[77712.608248] Disabled fast string operations
[77712.608301] kvm: enabling virtualization on CPU2
[77712.610632] CPU2 is up
[77712.610664] smpboot: Booting Node 0 Processor 3 APIC 0x3
[77712.621619] Disabled fast string operations
[77712.621671] kvm: enabling virtualization on CPU3
[77712.624062] CPU3 is up
[77712.638923] ACPI : EC: 2 stale EC events cleared
[77712.638938] ACPI: Waking up from system sleep state S3
[77712.832761] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[77712.832818] PM: noirq resume of devices complete after 17.822 msecs
[77712.833342] PM: early resume of devices complete after 0.485 msecs
[77712.833669] r8169 0000:03:00.0: System wakeup disabled by ACPI
[77712.833779] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[77712.850135] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[77712.850409] rtc_cmos 00:01: System wakeup disabled by ACPI
[77712.854800] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[77712.854895] radeon 0000:01:00.0: WB enabled
[77712.854899] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[77712.854901] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[77712.856125] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[77712.867946] sd 0:0:0:0: [sda] Starting disk
[77712.867965] sd 1:0:0:0: [sdb] Starting disk
[77712.872376] [drm] ring test on 0 succeeded in 1 usecs
[77712.872383] [drm] ring test on 3 succeeded in 3 usecs
[77713.048218] [drm] ring test on 5 succeeded in 1 usecs
[77713.048232] [drm] UVD initialized successfully.
[77713.048300] [drm] ib test on ring 0 succeeded in 0 usecs
[77713.048365] [drm] ib test on ring 3 succeeded in 0 usecs
[77713.049845] r8169 0000:03:00.0 eth0: link down
[77713.058760] usb 3-1.2: reset high-speed USB device number 8 using ehci-pci
[77713.058770] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[77713.178572] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[77713.193592] ata3.00: configured for UDMA/100
[77713.194553] ata5: SATA link down (SStatus 0 SControl 300)
[77713.194576] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[77713.196725] ata2.00: configured for UDMA/133
[77713.202585] ata4: SATA link down (SStatus 0 SControl 300)
[77713.222794] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[77713.694331] [drm] ib test on ring 5 succeeded
[77713.705431] PM: resume of devices complete after 872.684 msecs
[77713.713517] PM: Finishing wakeup.
[77713.713521] Restarting tasks ... done.
[77713.733195] video LNXVIDEO:00: Restoring backlight state
[77713.733348] video LNXVIDEO:01: Restoring backlight state
[77713.787586] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[77713.912144] r8169 0000:03:00.0 eth0: link down
[77713.913313] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[77713.920098] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[77715.936715] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[77715.949586] ata1.00: configured for UDMA/133
[77719.214620] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[77719.214629] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[77719.214635] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[77720.279380] wlan0: authenticate with 20:4e:7f:24:79:60
[77720.282075] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[77720.298079] wlan0: authenticated
[77720.301800] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[77720.302646] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[77720.304892] wlan0: associated
[77740.179994] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[77740.398853] usb 1-2: New USB device found, idVendor=046d, idProduct=c06c
[77740.398863] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[77740.398868] usb 1-2: Product: USB Optical Mouse
[77740.398872] usb 1-2: Manufacturer: Logitech
[77740.399305] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[77740.404009] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb1/1-2/1-2:1.0/0003:046D:C06C.0002/input/input14
[77740.460176] hid-generic 0003:046D:C06C.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:04:00.0-2/input0
[78950.381358] r8169 0000:03:00.0 eth0: link up
[86440.314329] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[86440.320329] cfg80211: Calling CRDA to update world regulatory domain
[86440.329751] cfg80211: World regulatory domain updated:
[86440.329762] cfg80211:  DFS Master region: unset
[86440.329766] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[86440.329775] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[86440.329781] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[86440.329786] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[86440.329790] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[86440.329795] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[86440.339486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[86440.463661] PM: Syncing filesystems ... done.
[86440.946319] PM: Preparing system for mem sleep
[86441.075756] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[86441.075770] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[86441.075783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[86441.099623] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[86441.104634] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[86441.104755] radeon 0000:01:00.0: WB enabled
[86441.104761] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[86441.104766] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[86441.105991] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[86441.122403] [drm] ring test on 0 succeeded in 1 usecs
[86441.122413] [drm] ring test on 3 succeeded in 3 usecs
[86441.308215] [drm] ring test on 5 succeeded in 2 usecs
[86441.308220] [drm] UVD initialized successfully.
[86441.308255] [drm] ib test on ring 0 succeeded in 0 usecs
[86441.308296] [drm] ib test on ring 3 succeeded in 0 usecs
[86441.966627] [drm] ib test on ring 5 succeeded
[86441.971867] Freezing user space processes ... (elapsed 0.002 seconds) done.
[86441.974516] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[86441.975926] PM: Entering mem sleep
[86441.975954] Suspending console(s) (use no_console_suspend to debug)
[86441.976531] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[86441.976601] sd 1:0:0:0: [sdb] Stopping disk
[86441.976855] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[86441.976947] sd 0:0:0:0: [sda] Stopping disk
[86442.969866] PM: suspend of devices complete after 994.308 msecs
[86442.985794] PM: late suspend of devices complete after 15.929 msecs
[86442.986833] r8169 0000:03:00.0: System wakeup enabled by ACPI
[86443.002038] PM: noirq suspend of devices complete after 16.250 msecs
[86443.002490] ACPI: Preparing to enter system sleep state S3
[86443.025932] PM: Saving platform NVS memory
[86443.025943] Disabling non-boot CPUs ...
[86443.026040] intel_pstate CPU 1 exiting
[86443.027528] kvm: disabling virtualization on CPU1
[86443.027540] smpboot: CPU 1 is now offline
[86443.028776] intel_pstate CPU 2 exiting
[86443.030210] kvm: disabling virtualization on CPU2
[86443.030940] smpboot: CPU 2 is now offline
[86443.031636] intel_pstate CPU 3 exiting
[86443.031920] Broke affinity for irq 16
[86443.031931] Broke affinity for irq 23
[86443.031939] Broke affinity for irq 25
[86443.031961] Broke affinity for irq 31
[86443.032984] kvm: disabling virtualization on CPU3
[86443.033002] smpboot: CPU 3 is now offline
[86443.035361] ACPI: Low-level resume complete
[86443.035412] PM: Restoring platform NVS memory
[86443.035826] Enabling non-boot CPUs ...
[86443.035880] x86: Booting SMP configuration:
[86443.035881] smpboot: Booting Node 0 Processor 1 APIC 0x1
[86443.046839] Disabled fast string operations
[86443.046894] kvm: enabling virtualization on CPU1
[86443.049252] CPU1 is up
[86443.049283] smpboot: Booting Node 0 Processor 2 APIC 0x2
[86443.060236] Disabled fast string operations
[86443.060287] kvm: enabling virtualization on CPU2
[86443.062617] CPU2 is up
[86443.062650] smpboot: Booting Node 0 Processor 3 APIC 0x3
[86443.073606] Disabled fast string operations
[86443.073659] kvm: enabling virtualization on CPU3
[86443.076066] CPU3 is up
[86443.119746] ACPI : EC: 8 stale EC events cleared
[86443.119759] ACPI: Waking up from system sleep state S3
[86443.369017] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[86443.369640] PM: noirq resume of devices complete after 17.967 msecs
[86443.370783] PM: early resume of devices complete after 1.101 msecs
[86443.371079] r8169 0000:03:00.0: System wakeup disabled by ACPI
[86443.371155] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[86443.382468] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[86443.386443] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[86443.386547] radeon 0000:01:00.0: WB enabled
[86443.386551] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[86443.386552] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[86443.387166] sd 0:0:0:0: [sda] Starting disk
[86443.387276] sd 1:0:0:0: [sdb] Starting disk
[86443.387785] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[86443.404035] [drm] ring test on 0 succeeded in 1 usecs
[86443.404042] [drm] ring test on 3 succeeded in 3 usecs
[86443.509022] rtc_cmos 00:01: System wakeup disabled by ACPI
[86443.579861] [drm] ring test on 5 succeeded in 1 usecs
[86443.579866] [drm] UVD initialized successfully.
[86443.579957] [drm] ib test on ring 0 succeeded in 0 usecs
[86443.580050] [drm] ib test on ring 3 succeeded in 0 usecs
[86443.581503] r8169 0000:03:00.0 eth0: link down
[86443.587462] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[86443.587630] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[86443.727339] ata4: SATA link down (SStatus 0 SControl 300)
[86443.727362] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[86443.727382] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[86443.729574] ata2.00: configured for UDMA/133
[86443.735332] ata5: SATA link down (SStatus 0 SControl 300)
[86443.742420] ata3.00: configured for UDMA/100
[86443.751540] usb 3-1.2: reset high-speed USB device number 8 using ehci-pci
[86443.804136] usb 1-2: reset low-speed USB device number 3 using xhci_hcd
[86443.844287] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[86443.844293] PM: Device 3-1.2 failed to resume async: error -32
[86444.111081] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b57f39c0
[86444.111092] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[86444.247079] [drm] ib test on ring 5 succeeded
[86444.257889] PM: resume of devices complete after 887.715 msecs
[86444.261811] PM: Finishing wakeup.
[86444.261812] Restarting tasks ... done.
[86444.267881] usb 3-1.2: USB disconnect, device number 8
[86444.272921] video LNXVIDEO:00: Restoring backlight state
[86444.273077] video LNXVIDEO:01: Restoring backlight state
[86444.453169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[86446.413578] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[86446.426489] ata1.00: configured for UDMA/133
[86446.529519] usb 3-1.2: new high-speed USB device number 9 using ehci-pci
[86446.622748] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[86446.622759] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[86446.622765] usb 3-1.2: Product: Cruzer Fit
[86446.622769] usb 3-1.2: Manufacturer: SanDisk
[86446.622774] usb 3-1.2: SerialNumber: 4C530007570515117331
[86446.623382] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[86446.623475] scsi host11: usb-storage 3-1.2:1.0
[86447.035209] r8169 0000:03:00.0 eth0: link down
[86447.036287] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[86447.043100] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[86447.621869] scsi 11:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[86447.622304] sd 11:0:0:0: Attached scsi generic sg3 type 0
[86447.623747] sd 11:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[86447.625723] sd 11:0:0:0: [sdc] Write Protect is off
[86447.625733] sd 11:0:0:0: [sdc] Mode Sense: 43 00 00 00
[86447.626834] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[86447.640115]  sdc: sdc1 sdc2 sdc3
[86447.643955] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[86450.159134] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[86450.159141] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[86450.159147] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[86453.283391] wlan0: authenticate with 20:4e:7f:24:79:60
[86453.285841] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[86453.330368] wlan0: authenticated
[86453.332870] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[86453.333730] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[86453.335953] wlan0: associated
[89809.207864] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[89809.218630] cfg80211: Calling CRDA to update world regulatory domain
[89809.223472] cfg80211: World regulatory domain updated:
[89809.223478] cfg80211:  DFS Master region: unset
[89809.223481] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[89809.223486] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[89809.223490] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[89809.223494] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[89809.223497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[89809.223500] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[89809.223766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[89809.371606] PM: Syncing filesystems ... done.
[89809.611102] PM: Preparing system for mem sleep
[89809.751241] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[89809.751249] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[89809.751257] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[89809.774370] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[89809.779176] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[89809.779288] radeon 0000:01:00.0: WB enabled
[89809.779294] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[89809.779298] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[89809.780523] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[89809.796921] [drm] ring test on 0 succeeded in 1 usecs
[89809.796932] [drm] ring test on 3 succeeded in 3 usecs
[89809.992631] [drm] ring test on 5 succeeded in 1 usecs
[89809.992638] [drm] UVD initialized successfully.
[89809.992676] [drm] ib test on ring 0 succeeded in 0 usecs
[89809.992707] [drm] ib test on ring 3 succeeded in 0 usecs
[89810.650300] [drm] ib test on ring 5 succeeded
[89810.659743] Freezing user space processes ... (elapsed 0.002 seconds) done.
[89810.662309] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[89810.663732] PM: Entering mem sleep
[89810.663765] Suspending console(s) (use no_console_suspend to debug)
[89810.664509] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[89810.664584] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[89810.664600] sd 1:0:0:0: [sdb] Stopping disk
[89810.664712] sd 0:0:0:0: [sda] Stopping disk
[89811.649643] PM: suspend of devices complete after 986.223 msecs
[89811.665554] PM: late suspend of devices complete after 15.899 msecs
[89811.666784] r8169 0000:03:00.0: System wakeup enabled by ACPI
[89811.681732] PM: noirq suspend of devices complete after 16.181 msecs
[89811.682331] ACPI: Preparing to enter system sleep state S3
[89811.705587] PM: Saving platform NVS memory
[89811.705599] Disabling non-boot CPUs ...
[89811.705653] intel_pstate CPU 1 exiting
[89811.707124] kvm: disabling virtualization on CPU1
[89811.707603] smpboot: CPU 1 is now offline
[89811.708313] intel_pstate CPU 2 exiting
[89811.709745] kvm: disabling virtualization on CPU2
[89811.710395] smpboot: CPU 2 is now offline
[89811.710936] intel_pstate CPU 3 exiting
[89811.711194] Broke affinity for irq 16
[89811.712242] kvm: disabling virtualization on CPU3
[89811.712255] smpboot: CPU 3 is now offline
[89811.714280] ACPI: Low-level resume complete
[89811.714329] PM: Restoring platform NVS memory
[89811.714749] Enabling non-boot CPUs ...
[89811.714799] x86: Booting SMP configuration:
[89811.714800] smpboot: Booting Node 0 Processor 1 APIC 0x1
[89811.726168] Disabled fast string operations
[89811.726222] kvm: enabling virtualization on CPU1
[89811.728806] CPU1 is up
[89811.728838] smpboot: Booting Node 0 Processor 2 APIC 0x2
[89811.739789] Disabled fast string operations
[89811.739839] kvm: enabling virtualization on CPU2
[89811.742166] CPU2 is up
[89811.742198] smpboot: Booting Node 0 Processor 3 APIC 0x3
[89811.753160] Disabled fast string operations
[89811.753212] kvm: enabling virtualization on CPU3
[89811.755602] CPU3 is up
[89811.775191] ACPI : EC: 3 stale EC events cleared
[89811.775206] ACPI: Waking up from system sleep state S3
[89812.735508] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[89812.736686] PM: noirq resume of devices complete after 17.754 msecs
[89812.737440] PM: early resume of devices complete after 0.695 msecs
[89812.737874] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[89812.737956] r8169 0000:03:00.0: System wakeup disabled by ACPI
[89812.745861] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[89812.749703] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[89812.749801] radeon 0000:01:00.0: WB enabled
[89812.749803] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[89812.749805] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[89812.751024] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[89812.754619] sd 1:0:0:0: [sdb] Starting disk
[89812.754659] sd 0:0:0:0: [sda] Starting disk
[89812.754863] rtc_cmos 00:01: System wakeup disabled by ACPI
[89812.767293] [drm] ring test on 0 succeeded in 1 usecs
[89812.767299] [drm] ring test on 3 succeeded in 3 usecs
[89812.943128] [drm] ring test on 5 succeeded in 1 usecs
[89812.943133] [drm] UVD initialized successfully.
[89812.943208] [drm] ib test on ring 0 succeeded in 0 usecs
[89812.943275] [drm] ib test on ring 3 succeeded in 0 usecs
[89812.944756] r8169 0000:03:00.0 eth0: link down
[89812.954457] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[89812.954461] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[89813.090289] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[89813.092562] ata2.00: configured for UDMA/133
[89813.098310] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[89813.098354] ata5: SATA link down (SStatus 0 SControl 300)
[89813.098373] ata4: SATA link down (SStatus 0 SControl 300)
[89813.113471] ata3.00: configured for UDMA/100
[89813.118526] usb 3-1.2: reset high-speed USB device number 9 using ehci-pci
[89813.211326] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[89813.211338] PM: Device 3-1.2 failed to resume async: error -32
[89813.590106] [drm] ib test on ring 5 succeeded
[89813.601568] PM: resume of devices complete after 864.718 msecs
[89813.610157] PM: Finishing wakeup.
[89813.610159] Restarting tasks ... 
[89813.610237] usb 1-2: USB disconnect, device number 3
[89813.614721] usb 3-1.2: USB disconnect, device number 9
[89813.618053] done.
[89813.653036] video LNXVIDEO:00: Restoring backlight state
[89813.653171] video LNXVIDEO:01: Restoring backlight state
[89813.683462] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[89813.791878] r8169 0000:03:00.0 eth0: link down
[89813.793349] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[89813.800102] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[89815.069026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[89815.082190] ata1.00: configured for UDMA/133
[89815.184963] usb 3-1.2: new high-speed USB device number 10 using ehci-pci
[89815.277626] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[89815.277630] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[89815.277632] usb 3-1.2: Product: Cruzer Fit
[89815.277634] usb 3-1.2: Manufacturer: SanDisk
[89815.277636] usb 3-1.2: SerialNumber: 4C530007570515117331
[89815.278244] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[89815.278405] scsi host12: usb-storage 3-1.2:1.0
[89816.277555] scsi 12:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[89816.279000] sd 12:0:0:0: Attached scsi generic sg3 type 0
[89816.279648] sd 12:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[89816.281388] sd 12:0:0:0: [sdc] Write Protect is off
[89816.281401] sd 12:0:0:0: [sdc] Mode Sense: 43 00 00 00
[89816.282463] sd 12:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[89816.297842]  sdc: sdc1 sdc2 sdc3
[89816.301814] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[89819.981018] wlan0: authenticate with 20:4e:7f:24:79:60
[89819.983641] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[89820.083313] wlan0: authenticated
[89820.085492] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[89820.086412] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[89820.088862] wlan0: associated
[89823.681297] audit: type=1400 audit(1432142897.971:33): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=31474 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[89823.926931] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[89823.926939] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[89823.926946] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[89847.926051] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[95257.520970] intel_powerclamp: Start idle injection to reduce power
[95317.610233] intel_powerclamp: Stop forced idle injection
[96077.731198] intel_powerclamp: Start idle injection to reduce power
[96081.733712] intel_powerclamp: Stop forced idle injection
[96085.757868] intel_powerclamp: Start idle injection to reduce power
[96089.760884] intel_powerclamp: Stop forced idle injection
[96221.792730] intel_powerclamp: Start idle injection to reduce power
[96237.796199] intel_powerclamp: Stop forced idle injection
[96237.820467] intel_powerclamp: Start idle injection to reduce power
[96241.820150] intel_powerclamp: Stop forced idle injection
[96329.944919] intel_powerclamp: Start idle injection to reduce power
[96357.953276] intel_powerclamp: Stop forced idle injection
[96810.061239] intel_powerclamp: Start idle injection to reduce power
[96882.121138] intel_powerclamp: Stop forced idle injection
[97058.249975] intel_powerclamp: Start idle injection to reduce power
[97114.304015] intel_powerclamp: Stop forced idle injection
[97962.438228] intel_powerclamp: Start idle injection to reduce power
[97966.439287] intel_powerclamp: Stop forced idle injection
[98090.566019] intel_powerclamp: Start idle injection to reduce power
[98094.567427] intel_powerclamp: Stop forced idle injection
[98154.597484] intel_powerclamp: Start idle injection to reduce power
[98182.610636] intel_powerclamp: Stop forced idle injection
[98280.832501] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.832673] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.832802] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.832851] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.833389] pci_bus 0000:02: Allocating resources
[98280.833480] pci_bus 0000:03: Allocating resources
[98280.833519] pci_bus 0000:04: Allocating resources
[98280.833550] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.833880] pci_bus 0000:01: Allocating resources
[98280.833923] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.834371] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[98280.962026] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[98280.969643] cfg80211: Calling CRDA to update world regulatory domain
[98280.980958] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[98280.991656] cfg80211: World regulatory domain updated:
[98280.991661] cfg80211:  DFS Master region: unset
[98280.991662] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[98280.991665] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[98280.991668] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[98280.991669] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[98280.991671] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[98280.991673] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[98282.234063] PM: Syncing filesystems ... done.
[98282.995581] PM: Preparing system for mem sleep
[98283.076338] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[98283.076352] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[98283.076364] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[98283.098678] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[98283.103214] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[98283.103327] radeon 0000:01:00.0: WB enabled
[98283.103332] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[98283.103336] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[98283.104572] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[98283.120887] [drm] ring test on 0 succeeded in 1 usecs
[98283.120896] [drm] ring test on 3 succeeded in 3 usecs
[98283.306641] [drm] ring test on 5 succeeded in 1 usecs
[98283.306649] [drm] UVD initialized successfully.
[98283.306686] [drm] ib test on ring 0 succeeded in 0 usecs
[98283.306716] [drm] ib test on ring 3 succeeded in 0 usecs
[98283.975147] [drm] ib test on ring 5 succeeded
[98283.985371] Freezing user space processes ... (elapsed 0.003 seconds) done.
[98283.988864] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[98283.990363] PM: Entering mem sleep
[98283.990393] Suspending console(s) (use no_console_suspend to debug)
[98283.991030] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[98283.991106] sd 1:0:0:0: [sdb] Stopping disk
[98283.991156] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[98283.991215] sd 0:0:0:0: [sda] Stopping disk
[98285.010444] PM: suspend of devices complete after 1020.448 msecs
[98285.026385] PM: late suspend of devices complete after 15.937 msecs
[98285.028521] r8169 0000:03:00.0: System wakeup enabled by ACPI
[98285.042621] PM: noirq suspend of devices complete after 16.236 msecs
[98285.043283] ACPI: Preparing to enter system sleep state S3
[98285.066422] PM: Saving platform NVS memory
[98285.066434] Disabling non-boot CPUs ...
[98285.066532] intel_pstate CPU 1 exiting
[98285.068055] kvm: disabling virtualization on CPU1
[98285.068086] smpboot: CPU 1 is now offline
[98285.069535] intel_pstate CPU 2 exiting
[98285.070975] kvm: disabling virtualization on CPU2
[98285.071703] smpboot: CPU 2 is now offline
[98285.072441] intel_pstate CPU 3 exiting
[98285.072745] Broke affinity for irq 16
[98285.072756] Broke affinity for irq 23
[98285.073811] kvm: disabling virtualization on CPU3
[98285.073833] smpboot: CPU 3 is now offline
[98285.076390] ACPI: Low-level resume complete
[98285.076442] PM: Restoring platform NVS memory
[98285.076899] Enabling non-boot CPUs ...
[98285.076953] x86: Booting SMP configuration:
[98285.076954] smpboot: Booting Node 0 Processor 1 APIC 0x1
[98285.087911] Disabled fast string operations
[98285.087966] kvm: enabling virtualization on CPU1
[98285.090342] CPU1 is up
[98285.090372] smpboot: Booting Node 0 Processor 2 APIC 0x2
[98285.101327] Disabled fast string operations
[98285.101379] kvm: enabling virtualization on CPU2
[98285.103714] CPU2 is up
[98285.103747] smpboot: Booting Node 0 Processor 3 APIC 0x3
[98285.114704] Disabled fast string operations
[98285.114756] kvm: enabling virtualization on CPU3
[98285.117147] CPU3 is up
[98285.128253] ACPI : EC: 1 stale EC events cleared
[98285.128268] ACPI: Waking up from system sleep state S3
[98285.218211] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[98285.218297] PM: noirq resume of devices complete after 17.912 msecs
[98285.218830] PM: early resume of devices complete after 0.465 msecs
[98285.219372] r8169 0000:03:00.0: System wakeup disabled by ACPI
[98285.224441] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[98285.225385] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[98285.229535] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[98285.229639] radeon 0000:01:00.0: WB enabled
[98285.229643] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[98285.229644] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[98285.230868] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[98285.247190] [drm] ring test on 0 succeeded in 0 usecs
[98285.247206] [drm] ring test on 3 succeeded in 2 usecs
[98285.275497] rtc_cmos 00:01: System wakeup disabled by ACPI
[98285.277727] sd 1:0:0:0: [sdb] Starting disk
[98285.277747] sd 0:0:0:0: [sda] Starting disk
[98285.423013] [drm] ring test on 5 succeeded in 1 usecs
[98285.423018] [drm] UVD initialized successfully.
[98285.423098] [drm] ib test on ring 0 succeeded in 0 usecs
[98285.423165] [drm] ib test on ring 3 succeeded in 0 usecs
[98285.424666] r8169 0000:03:00.0 eth0: link down
[98285.452140] usb 3-1.2: reset high-speed USB device number 10 using ehci-pci
[98285.452157] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[98285.616180] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[98285.619962] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[98285.620001] ata4: SATA link down (SStatus 0 SControl 300)
[98285.620024] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98285.622298] ata2.00: configured for UDMA/133
[98285.627952] ata5: SATA link down (SStatus 0 SControl 300)
[98285.635207] ata3.00: configured for UDMA/100
[98286.079735] [drm] ib test on ring 5 succeeded
[98286.091709] PM: resume of devices complete after 873.474 msecs
[98286.101210] PM: Finishing wakeup.
[98286.101213] Restarting tasks ... done.
[98286.126072] video LNXVIDEO:00: Restoring backlight state
[98286.126297] video LNXVIDEO:01: Restoring backlight state
[98286.206415] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[98286.321536] r8169 0000:03:00.0 eth0: link down
[98286.322619] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[98286.329412] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[98288.414020] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[98288.426841] ata1.00: configured for UDMA/133
[98291.983781] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[98291.983793] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[98291.983802] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[98292.775687] wlan0: authenticate with 20:4e:7f:24:79:60
[98292.778170] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[98292.812433] wlan0: authenticated
[98292.814953] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[98292.815771] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[98292.817973] wlan0: associated
[98301.155212] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[101660.460263] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[112211.956318] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.956447] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.956538] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.956571] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.956906] pci_bus 0000:02: Allocating resources
[112211.956987] pci_bus 0000:03: Allocating resources
[112211.957018] pci_bus 0000:04: Allocating resources
[112211.957040] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.957250] pci_bus 0000:01: Allocating resources
[112211.957286] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112211.957562] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[112212.061068] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[112212.066888] cfg80211: Calling CRDA to update world regulatory domain
[112212.072241] cfg80211: World regulatory domain updated:
[112212.072247] cfg80211:  DFS Master region: unset
[112212.072249] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[112212.072253] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[112212.072256] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[112212.072258] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[112212.072260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[112212.072263] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[112212.083021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112213.363738] PM: Syncing filesystems ... done.
[112214.239524] PM: Preparing system for mem sleep
[112214.349875] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[112214.349891] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[112214.349904] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[112214.371120] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[112214.375045] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[112214.375143] radeon 0000:01:00.0: WB enabled
[112214.375147] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[112214.375150] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[112214.376374] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[112214.392651] [drm] ring test on 0 succeeded in 1 usecs
[112214.392659] [drm] ring test on 3 succeeded in 3 usecs
[112214.578415] [drm] ring test on 5 succeeded in 1 usecs
[112214.578424] [drm] UVD initialized successfully.
[112214.578463] [drm] ib test on ring 0 succeeded in 0 usecs
[112214.578505] [drm] ib test on ring 3 succeeded in 0 usecs
[112215.236831] [drm] ib test on ring 5 succeeded
[112215.250307] Freezing user space processes ... (elapsed 0.003 seconds) done.
[112215.254184] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[112215.255693] PM: Entering mem sleep
[112215.255721] Suspending console(s) (use no_console_suspend to debug)
[112215.256269] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[112215.256344] sd 1:0:0:0: [sdb] Stopping disk
[112215.256386] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[112215.256444] sd 0:0:0:0: [sda] Stopping disk
[112216.236130] PM: suspend of devices complete after 980.826 msecs
[112216.252115] PM: late suspend of devices complete after 15.981 msecs
[112216.253147] r8169 0000:03:00.0: System wakeup enabled by ACPI
[112216.268280] PM: noirq suspend of devices complete after 16.169 msecs
[112216.268820] ACPI: Preparing to enter system sleep state S3
[112216.292125] PM: Saving platform NVS memory
[112216.292137] Disabling non-boot CPUs ...
[112216.292217] intel_pstate CPU 1 exiting
[112216.293743] kvm: disabling virtualization on CPU1
[112216.293764] smpboot: CPU 1 is now offline
[112216.295126] intel_pstate CPU 2 exiting
[112216.296541] kvm: disabling virtualization on CPU2
[112216.296566] smpboot: CPU 2 is now offline
[112216.297183] intel_pstate CPU 3 exiting
[112216.297507] Broke affinity for irq 16
[112216.297519] Broke affinity for irq 23
[112216.297546] Broke affinity for irq 31
[112216.298569] kvm: disabling virtualization on CPU3
[112216.298580] smpboot: CPU 3 is now offline
[112216.300834] ACPI: Low-level resume complete
[112216.300883] PM: Restoring platform NVS memory
[112216.301302] Enabling non-boot CPUs ...
[112216.301353] x86: Booting SMP configuration:
[112216.301354] smpboot: Booting Node 0 Processor 1 APIC 0x1
[112216.312721] Disabled fast string operations
[112216.312776] kvm: enabling virtualization on CPU1
[112216.315368] CPU1 is up
[112216.315398] smpboot: Booting Node 0 Processor 2 APIC 0x2
[112216.326351] Disabled fast string operations
[112216.326402] kvm: enabling virtualization on CPU2
[112216.328744] CPU2 is up
[112216.328776] smpboot: Booting Node 0 Processor 3 APIC 0x3
[112216.339732] Disabled fast string operations
[112216.339784] kvm: enabling virtualization on CPU3
[112216.342197] CPU3 is up
[112216.353816] ACPI : EC: 1 stale EC events cleared
[112216.353832] ACPI: Waking up from system sleep state S3
[112216.442169] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[112216.443806] PM: noirq resume of devices complete after 17.866 msecs
[112216.444321] PM: early resume of devices complete after 0.471 msecs
[112216.444704] r8169 0000:03:00.0: System wakeup disabled by ACPI
[112216.444737] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[112216.451943] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[112216.456941] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[112216.457046] radeon 0000:01:00.0: WB enabled
[112216.457050] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[112216.457052] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[112216.458270] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[112216.462032] sd 0:0:0:0: [sda] Starting disk
[112216.462055] sd 1:0:0:0: [sdb] Starting disk
[112216.462320] rtc_cmos 00:01: System wakeup disabled by ACPI
[112216.474583] [drm] ring test on 0 succeeded in 1 usecs
[112216.474590] [drm] ring test on 3 succeeded in 3 usecs
[112216.660403] [drm] ring test on 5 succeeded in 1 usecs
[112216.660417] [drm] UVD initialized successfully.
[112216.660487] [drm] ib test on ring 0 succeeded in 0 usecs
[112216.660557] [drm] ib test on ring 3 succeeded in 0 usecs
[112216.662037] r8169 0000:03:00.0 eth0: link down
[112216.669705] usb 3-1.2: reset high-speed USB device number 10 using ehci-pci
[112216.669718] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[112216.781536] ata4: SATA link down (SStatus 0 SControl 300)
[112216.789535] ata5: SATA link down (SStatus 0 SControl 300)
[112216.805521] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[112216.813526] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[112216.815715] ata2.00: configured for UDMA/133
[112216.820535] ata3.00: configured for UDMA/100
[112216.833743] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[112217.317345] [drm] ib test on ring 5 succeeded
[112217.328847] PM: resume of devices complete after 885.129 msecs
[112217.336792] PM: Finishing wakeup.
[112217.336795] Restarting tasks ... done.
[112217.353894] video LNXVIDEO:00: Restoring backlight state
[112217.354049] video LNXVIDEO:01: Restoring backlight state
[112217.432391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112217.551145] r8169 0000:03:00.0 eth0: link down
[112217.552326] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[112217.559365] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[112219.627588] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[112219.640356] ata1.00: configured for UDMA/133
[112223.325241] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[112223.325253] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[112223.325262] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[112223.908081] wlan0: authenticate with 20:4e:7f:24:79:60
[112223.910603] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[112223.996451] wlan0: authenticated
[112224.000558] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[112224.001515] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[112224.004017] wlan0: associated
[119861.841351] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[119861.841369] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[119861.841384] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[119861.863464] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[119861.868698] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[119861.868820] radeon 0000:01:00.0: WB enabled
[119861.868827] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[119861.868831] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[119861.870058] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[119861.886478] [drm] ring test on 0 succeeded in 1 usecs
[119861.886489] [drm] ring test on 3 succeeded in 3 usecs
[119862.072297] [drm] ring test on 5 succeeded in 1 usecs
[119862.072305] [drm] UVD initialized successfully.
[119862.072346] [drm] ib test on ring 0 succeeded in 0 usecs
[119862.072378] [drm] ib test on ring 3 succeeded in 0 usecs
[119862.718458] [drm] ib test on ring 5 succeeded
[119868.946216] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[119868.946224] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[119868.946230] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[119873.320899] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.321027] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.321120] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.321153] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.321500] pci_bus 0000:02: Allocating resources
[119873.321580] pci_bus 0000:03: Allocating resources
[119873.321610] pci_bus 0000:04: Allocating resources
[119873.321632] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.321815] pci_bus 0000:01: Allocating resources
[119873.321855] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119873.322171] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[119874.052739] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[119874.062216] cfg80211: Calling CRDA to update world regulatory domain
[119874.075140] cfg80211: World regulatory domain updated:
[119874.075147] cfg80211:  DFS Master region: unset
[119874.075150] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[119874.075156] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[119874.075161] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[119874.075165] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[119874.075169] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[119874.075173] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[119874.079083] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[119874.241641] PM: Syncing filesystems ... done.
[119875.106678] PM: Preparing system for mem sleep
[119875.210405] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[119875.210417] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[119875.210427] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[119875.231473] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[119875.235343] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[119875.235438] radeon 0000:01:00.0: WB enabled
[119875.235442] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[119875.235445] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[119875.236671] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[119875.252903] [drm] ring test on 0 succeeded in 1 usecs
[119875.252911] [drm] ring test on 3 succeeded in 3 usecs
[119875.438628] [drm] ring test on 5 succeeded in 1 usecs
[119875.438636] [drm] UVD initialized successfully.
[119875.438673] [drm] ib test on ring 0 succeeded in 0 usecs
[119875.438714] [drm] ib test on ring 3 succeeded in 0 usecs
[119876.097311] [drm] ib test on ring 5 succeeded
[119876.111186] Freezing user space processes ... (elapsed 0.003 seconds) done.
[119876.114409] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[119876.115818] PM: Entering mem sleep
[119876.115843] Suspending console(s) (use no_console_suspend to debug)
[119876.116318] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[119876.116392] sd 1:0:0:0: [sdb] Stopping disk
[119876.116466] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[119876.116535] sd 0:0:0:0: [sda] Stopping disk
[119877.104556] PM: suspend of devices complete after 989.157 msecs
[119877.120471] PM: late suspend of devices complete after 15.919 msecs
[119877.121420] r8169 0000:03:00.0: System wakeup enabled by ACPI
[119877.136755] PM: noirq suspend of devices complete after 16.290 msecs
[119877.137353] ACPI: Preparing to enter system sleep state S3
[119877.160604] PM: Saving platform NVS memory
[119877.160616] Disabling non-boot CPUs ...
[119877.160697] intel_pstate CPU 1 exiting
[119877.162227] kvm: disabling virtualization on CPU1
[119877.162861] smpboot: CPU 1 is now offline
[119877.163635] intel_pstate CPU 2 exiting
[119877.165079] kvm: disabling virtualization on CPU2
[119877.165817] smpboot: CPU 2 is now offline
[119877.166561] intel_pstate CPU 3 exiting
[119877.166883] Broke affinity for irq 25
[119877.167936] kvm: disabling virtualization on CPU3
[119877.167949] smpboot: CPU 3 is now offline
[119877.170354] ACPI: Low-level resume complete
[119877.170405] PM: Restoring platform NVS memory
[119877.170786] Enabling non-boot CPUs ...
[119877.170839] x86: Booting SMP configuration:
[119877.170840] smpboot: Booting Node 0 Processor 1 APIC 0x1
[119877.181798] Disabled fast string operations
[119877.181853] kvm: enabling virtualization on CPU1
[119877.184295] CPU1 is up
[119877.184326] smpboot: Booting Node 0 Processor 2 APIC 0x2
[119877.195278] Disabled fast string operations
[119877.195329] kvm: enabling virtualization on CPU2
[119877.197661] CPU2 is up
[119877.197691] smpboot: Booting Node 0 Processor 3 APIC 0x3
[119877.208648] Disabled fast string operations
[119877.208700] kvm: enabling virtualization on CPU3
[119877.211097] CPU3 is up
[119877.238411] ACPI : EC: 5 stale EC events cleared
[119877.238425] ACPI: Waking up from system sleep state S3
[119877.496035] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[119877.496248] PM: noirq resume of devices complete after 17.934 msecs
[119877.496680] PM: early resume of devices complete after 0.388 msecs
[119877.497057] r8169 0000:03:00.0: System wakeup disabled by ACPI
[119877.497620] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[119877.509119] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[119877.513934] rtc_cmos 00:01: System wakeup disabled by ACPI
[119877.514006] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[119877.514099] radeon 0000:01:00.0: WB enabled
[119877.514103] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[119877.514105] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[119877.515325] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[119877.516306] sd 0:0:0:0: [sda] Starting disk
[119877.516307] sd 1:0:0:0: [sdb] Starting disk
[119877.531581] [drm] ring test on 0 succeeded in 1 usecs
[119877.531588] [drm] ring test on 3 succeeded in 3 usecs
[119877.707446] [drm] ring test on 5 succeeded in 1 usecs
[119877.707452] [drm] UVD initialized successfully.
[119877.707520] [drm] ib test on ring 0 succeeded in 0 usecs
[119877.707615] [drm] ib test on ring 3 succeeded in 0 usecs
[119877.709056] r8169 0000:03:00.0 eth0: link down
[119877.722283] usb 3-1.2: reset high-speed USB device number 10 using ehci-pci
[119877.722294] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[119877.838021] ata4: SATA link down (SStatus 0 SControl 300)
[119877.846017] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[119877.848206] ata2.00: configured for UDMA/133
[119877.854005] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[119877.862011] ata5: SATA link down (SStatus 0 SControl 300)
[119877.869046] ata3.00: configured for UDMA/100
[119877.886194] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[119878.353820] [drm] ib test on ring 5 succeeded
[119878.364527] PM: resume of devices complete after 868.441 msecs
[119878.368299] PM: Finishing wakeup.
[119878.368300] Restarting tasks ... done.
[119878.381896] video LNXVIDEO:00: Restoring backlight state
[119878.382045] video LNXVIDEO:01: Restoring backlight state
[119878.455972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[119878.537559] usb 1-2: new low-speed USB device number 4 using xhci_hcd
[119878.579550] r8169 0000:03:00.0 eth0: link down
[119878.580626] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[119878.587410] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[119878.751203] usb 1-2: New USB device found, idVendor=046d, idProduct=c06c
[119878.751213] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[119878.751219] usb 1-2: Product: USB Optical Mouse
[119878.751223] usb 1-2: Manufacturer: Logitech
[119878.751402] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[119878.755085] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb1/1-2/1-2:1.0/0003:046D:C06C.0003/input/input15
[119878.809576] hid-generic 0003:046D:C06C.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:04:00.0-2/input0
[119880.540180] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[119880.552881] ata1.00: configured for UDMA/133
[119880.881493] r8169 0000:03:00.0 eth0: link up
[119883.914069] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[119883.914076] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[119883.914082] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[119885.024175] wlan0: authenticate with 20:4e:7f:24:79:60
[119885.026497] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[119885.062546] wlan0: authenticated
[119885.065042] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[119885.065983] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[119885.068684] wlan0: associated
[125049.702110] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[125049.708921] cfg80211: Calling CRDA to update world regulatory domain
[125049.717181] cfg80211: World regulatory domain updated:
[125049.717192] cfg80211:  DFS Master region: unset
[125049.717196] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[125049.717206] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125049.717212] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125049.717218] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[125049.717223] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125049.717229] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125049.729726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[125049.855670] PM: Syncing filesystems ... done.
[125050.231166] PM: Preparing system for mem sleep
[125050.359901] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[125050.359913] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[125050.359923] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[125050.380618] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[125050.384439] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[125050.384533] radeon 0000:01:00.0: WB enabled
[125050.384537] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[125050.384539] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[125050.385765] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[125050.401980] [drm] ring test on 0 succeeded in 1 usecs
[125050.401987] [drm] ring test on 3 succeeded in 3 usecs
[125050.597639] [drm] ring test on 5 succeeded in 1 usecs
[125050.597644] [drm] UVD initialized successfully.
[125050.597680] [drm] ib test on ring 0 succeeded in 0 usecs
[125050.597722] [drm] ib test on ring 3 succeeded in 0 usecs
[125051.254705] [drm] ib test on ring 5 succeeded
[125051.265237] Freezing user space processes ... (elapsed 0.003 seconds) done.
[125051.269018] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[125051.270564] PM: Entering mem sleep
[125051.270596] Suspending console(s) (use no_console_suspend to debug)
[125051.271268] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[125051.271279] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[125051.271349] sd 1:0:0:0: [sdb] Stopping disk
[125051.271359] sd 0:0:0:0: [sda] Stopping disk
[125052.321936] PM: suspend of devices complete after 1051.768 msecs
[125052.337924] PM: late suspend of devices complete after 15.984 msecs
[125052.339964] r8169 0000:03:00.0: System wakeup enabled by ACPI
[125052.354081] PM: noirq suspend of devices complete after 16.160 msecs
[125052.354645] ACPI: Preparing to enter system sleep state S3
[125052.377946] PM: Saving platform NVS memory
[125052.377958] Disabling non-boot CPUs ...
[125052.378039] intel_pstate CPU 1 exiting
[125052.379550] kvm: disabling virtualization on CPU1
[125052.379571] smpboot: CPU 1 is now offline
[125052.380890] intel_pstate CPU 2 exiting
[125052.382333] kvm: disabling virtualization on CPU2
[125052.383037] smpboot: CPU 2 is now offline
[125052.383629] intel_pstate CPU 3 exiting
[125052.383910] Broke affinity for irq 16
[125052.383920] Broke affinity for irq 23
[125052.383928] Broke affinity for irq 25
[125052.383949] Broke affinity for irq 31
[125052.384969] kvm: disabling virtualization on CPU3
[125052.384977] smpboot: CPU 3 is now offline
[125052.387026] ACPI: Low-level resume complete
[125052.387075] PM: Restoring platform NVS memory
[125052.387474] Enabling non-boot CPUs ...
[125052.387524] x86: Booting SMP configuration:
[125052.387526] smpboot: Booting Node 0 Processor 1 APIC 0x1
[125052.398894] Disabled fast string operations
[125052.398948] kvm: enabling virtualization on CPU1
[125052.401533] CPU1 is up
[125052.401564] smpboot: Booting Node 0 Processor 2 APIC 0x2
[125052.412518] Disabled fast string operations
[125052.412570] kvm: enabling virtualization on CPU2
[125052.414913] CPU2 is up
[125052.414945] smpboot: Booting Node 0 Processor 3 APIC 0x3
[125052.425901] Disabled fast string operations
[125052.425953] kvm: enabling virtualization on CPU3
[125052.428370] CPU3 is up
[125052.435608] ACPI : EC: 0 stale EC events cleared
[125052.435620] ACPI: Waking up from system sleep state S3
[125052.501562] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[125052.501642] PM: noirq resume of devices complete after 17.860 msecs
[125052.502111] PM: early resume of devices complete after 0.400 msecs
[125052.503710] r8169 0000:03:00.0: System wakeup disabled by ACPI
[125052.503752] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[125052.503760] rtc_cmos 00:01: System wakeup disabled by ACPI
[125052.516034] sd 0:0:0:0: [sda] Starting disk
[125052.516062] sd 1:0:0:0: [sdb] Starting disk
[125052.526762] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[125052.530817] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[125052.530918] radeon 0000:01:00.0: WB enabled
[125052.530921] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[125052.530923] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[125052.532146] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[125052.548539] [drm] ring test on 0 succeeded in 1 usecs
[125052.548547] [drm] ring test on 3 succeeded in 3 usecs
[125052.724405] [drm] ring test on 5 succeeded in 1 usecs
[125052.724410] [drm] UVD initialized successfully.
[125052.724490] [drm] ib test on ring 0 succeeded in 0 usecs
[125052.724559] [drm] ib test on ring 3 succeeded in 0 usecs
[125052.726062] r8169 0000:03:00.0 eth0: link down
[125052.727545] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[125052.727556] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[125052.835342] ata5: SATA link down (SStatus 0 SControl 300)
[125052.843326] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[125052.845460] ata2.00: configured for UDMA/133
[125052.851331] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[125052.859316] ata4: SATA link down (SStatus 0 SControl 300)
[125052.866298] ata3.00: configured for UDMA/100
[125052.891489] usb 3-1.2: reset high-speed USB device number 10 using ehci-pci
[125052.940248] usb 1-2: reset low-speed USB device number 4 using xhci_hcd
[125052.984364] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[125052.984379] PM: Device 3-1.2 failed to resume async: error -32
[125053.247079] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035139060
[125053.247090] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[125053.383058] [drm] ib test on ring 5 succeeded
[125053.394855] PM: resume of devices complete after 893.354 msecs
[125053.402958] PM: Finishing wakeup.
[125053.402963] Restarting tasks ... 
[125053.411444] usb 3-1.2: USB disconnect, device number 10
[125053.418053] done.
[125053.427522] video LNXVIDEO:00: Restoring backlight state
[125053.427663] video LNXVIDEO:01: Restoring backlight state
[125055.024192] r8169 0000:03:00.0 eth0: link up
[125055.709384] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[125055.722395] ata1.00: configured for UDMA/133
[125055.806524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[125055.837442] usb 3-1.2: new high-speed USB device number 11 using ehci-pci
[125055.930118] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[125055.930126] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[125055.930130] usb 3-1.2: Product: Cruzer Fit
[125055.930134] usb 3-1.2: Manufacturer: SanDisk
[125055.930138] usb 3-1.2: SerialNumber: 4C530007570515117331
[125055.930592] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[125055.936516] scsi host13: usb-storage 3-1.2:1.0
[125056.227082] r8169 0000:03:00.0 eth0: link down
[125056.227096] r8169 0000:03:00.0 eth0: link down
[125056.229554] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[125056.236407] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[125056.933767] scsi 13:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[125056.934608] sd 13:0:0:0: Attached scsi generic sg3 type 0
[125056.935939] sd 13:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[125056.940170] sd 13:0:0:0: [sdc] Write Protect is off
[125056.940178] sd 13:0:0:0: [sdc] Mode Sense: 43 00 00 00
[125056.941476] sd 13:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[125056.954732]  sdc: sdc1 sdc2 sdc3
[125056.958885] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[125058.943995] r8169 0000:03:00.0 eth0: link up
[125059.215112] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[125059.215121] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[125059.215127] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[125070.691247] wlan0: authenticate with 20:4e:7f:24:79:60
[125070.693991] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[125070.752931] wlan0: authenticated
[125070.755040] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[125070.755877] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[125070.758082] wlan0: associated
[125653.057713] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[125653.063069] cfg80211: Calling CRDA to update world regulatory domain
[125653.070351] cfg80211: World regulatory domain updated:
[125653.070360] cfg80211:  DFS Master region: unset
[125653.070363] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[125653.070369] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125653.070374] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125653.070377] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[125653.070381] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125653.070384] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[125653.080438] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[125653.203071] PM: Syncing filesystems ... done.
[125653.478056] PM: Preparing system for mem sleep
[125653.614743] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[125653.614756] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[125653.614767] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[125653.637006] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[125653.641433] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[125653.641542] radeon 0000:01:00.0: WB enabled
[125653.641547] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[125653.641551] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[125653.642790] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[125653.659127] [drm] ring test on 0 succeeded in 1 usecs
[125653.659135] [drm] ring test on 3 succeeded in 3 usecs
[125653.844871] [drm] ring test on 5 succeeded in 1 usecs
[125653.844877] [drm] UVD initialized successfully.
[125653.844914] [drm] ib test on ring 0 succeeded in 0 usecs
[125653.844955] [drm] ib test on ring 3 succeeded in 0 usecs
[125654.501673] [drm] ib test on ring 5 succeeded
[125654.514238] Freezing user space processes ... (elapsed 0.003 seconds) done.
[125654.517717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[125654.519169] PM: Entering mem sleep
[125654.519201] Suspending console(s) (use no_console_suspend to debug)
[125654.519849] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[125654.519882] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[125654.519920] sd 1:0:0:0: [sdb] Stopping disk
[125654.519942] sd 0:0:0:0: [sda] Stopping disk
[125655.580896] PM: suspend of devices complete after 1062.171 msecs
[125655.596736] PM: late suspend of devices complete after 15.841 msecs
[125655.598780] r8169 0000:03:00.0: System wakeup enabled by ACPI
[125655.613007] PM: noirq suspend of devices complete after 16.276 msecs
[125655.613605] ACPI: Preparing to enter system sleep state S3
[125655.636835] PM: Saving platform NVS memory
[125655.636847] Disabling non-boot CPUs ...
[125655.636926] intel_pstate CPU 1 exiting
[125655.638440] kvm: disabling virtualization on CPU1
[125655.638462] smpboot: CPU 1 is now offline
[125655.639850] intel_pstate CPU 2 exiting
[125655.641262] kvm: disabling virtualization on CPU2
[125655.641920] smpboot: CPU 2 is now offline
[125655.642585] intel_pstate CPU 3 exiting
[125655.643899] kvm: disabling virtualization on CPU3
[125655.643910] smpboot: CPU 3 is now offline
[125655.646427] ACPI: Low-level resume complete
[125655.646479] PM: Restoring platform NVS memory
[125655.646864] Enabling non-boot CPUs ...
[125655.646919] x86: Booting SMP configuration:
[125655.646920] smpboot: Booting Node 0 Processor 1 APIC 0x1
[125655.657878] Disabled fast string operations
[125655.657933] kvm: enabling virtualization on CPU1
[125655.660302] CPU1 is up
[125655.660332] smpboot: Booting Node 0 Processor 2 APIC 0x2
[125655.671285] Disabled fast string operations
[125655.671336] kvm: enabling virtualization on CPU2
[125655.673668] CPU2 is up
[125655.673700] smpboot: Booting Node 0 Processor 3 APIC 0x3
[125655.684656] Disabled fast string operations
[125655.684708] kvm: enabling virtualization on CPU3
[125655.687105] CPU3 is up
[125655.698659] ACPI : EC: 1 stale EC events cleared
[125655.698674] ACPI: Waking up from system sleep state S3
[125655.867184] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[125655.868306] PM: noirq resume of devices complete after 17.597 msecs
[125655.868665] PM: early resume of devices complete after 0.318 msecs
[125655.869032] r8169 0000:03:00.0: System wakeup disabled by ACPI
[125655.873814] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[125655.876477] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[125655.881183] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[125655.881287] radeon 0000:01:00.0: WB enabled
[125655.881291] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[125655.881293] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[125655.882527] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[125655.885833] rtc_cmos 00:01: System wakeup disabled by ACPI
[125655.886473] sd 1:0:0:0: [sdb] Starting disk
[125655.886528] sd 0:0:0:0: [sda] Starting disk
[125655.898824] [drm] ring test on 0 succeeded in 1 usecs
[125655.898831] [drm] ring test on 3 succeeded in 3 usecs
[125656.082511] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[125656.082526] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[125656.084611] [drm] ring test on 5 succeeded in 1 usecs
[125656.084622] [drm] UVD initialized successfully.
[125656.084690] [drm] ib test on ring 0 succeeded in 0 usecs
[125656.084753] [drm] ib test on ring 3 succeeded in 0 usecs
[125656.086213] r8169 0000:03:00.0 eth0: link down
[125656.206307] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[125656.208501] ata2.00: configured for UDMA/133
[125656.222286] ata4: SATA link down (SStatus 0 SControl 300)
[125656.230290] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[125656.230310] ata5: SATA link down (SStatus 0 SControl 300)
[125656.245389] ata3.00: configured for UDMA/100
[125656.246633] usb 3-1.2: reset high-speed USB device number 11 using ehci-pci
[125656.303166] usb 1-2: reset low-speed USB device number 4 using xhci_hcd
[125656.339614] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[125656.339630] PM: Device 3-1.2 failed to resume async: error -32
[125656.609866] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035139060
[125656.609876] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[125656.742053] [drm] ib test on ring 5 succeeded
[125656.753460] PM: resume of devices complete after 885.441 msecs
[125656.761525] PM: Finishing wakeup.
[125656.761528] Restarting tasks ... done.
[125656.786489] usb 3-1.2: USB disconnect, device number 11
[125656.789676] video LNXVIDEO:00: Restoring backlight state
[125656.789812] video LNXVIDEO:01: Restoring backlight state
[125656.968413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[125658.984327] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[125658.997514] ata1.00: configured for UDMA/133
[125659.104441] usb 3-1.2: new high-speed USB device number 12 using ehci-pci
[125659.197732] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[125659.197741] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[125659.197746] usb 3-1.2: Product: Cruzer Fit
[125659.197749] usb 3-1.2: Manufacturer: SanDisk
[125659.197753] usb 3-1.2: SerialNumber: 4C530007570515117331
[125659.198308] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[125659.198927] scsi host14: usb-storage 3-1.2:1.0
[125659.362001] r8169 0000:03:00.0 eth0: link down
[125659.363153] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[125659.369985] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[125660.196872] scsi 14:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[125660.197811] sd 14:0:0:0: Attached scsi generic sg3 type 0
[125660.198988] sd 14:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[125660.200627] sd 14:0:0:0: [sdc] Write Protect is off
[125660.200636] sd 14:0:0:0: [sdc] Mode Sense: 43 00 00 00
[125660.204241] sd 14:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[125660.217801]  sdc: sdc1 sdc2 sdc3
[125660.222370] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[125662.500561] r8169 0000:03:00.0 eth0: link up
[125662.553831] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[125662.553842] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[125662.553852] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[125665.823727] wlan0: authenticate with 20:4e:7f:24:79:60
[125665.825981] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[125665.884807] wlan0: authenticated
[125665.887160] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[125665.888017] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[125665.890248] wlan0: associated
[126256.573597] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[126256.577895] cfg80211: Calling CRDA to update world regulatory domain
[126256.586598] cfg80211: World regulatory domain updated:
[126256.586607] cfg80211:  DFS Master region: unset
[126256.586610] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[126256.586617] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[126256.586621] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[126256.586625] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[126256.586629] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[126256.586632] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[126256.598498] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[126256.723932] PM: Syncing filesystems ... done.
[126256.899860] PM: Preparing system for mem sleep
[126257.021736] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[126257.021747] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[126257.021757] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[126257.044777] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[126257.049571] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[126257.049682] radeon 0000:01:00.0: WB enabled
[126257.049688] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[126257.049692] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[126257.050922] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[126257.067314] [drm] ring test on 0 succeeded in 1 usecs
[126257.067323] [drm] ring test on 3 succeeded in 3 usecs
[126257.253081] [drm] ring test on 5 succeeded in 1 usecs
[126257.253087] [drm] UVD initialized successfully.
[126257.253124] [drm] ib test on ring 0 succeeded in 0 usecs
[126257.253165] [drm] ib test on ring 3 succeeded in 0 usecs
[126257.920771] [drm] ib test on ring 5 succeeded
[126257.933952] Freezing user space processes ... (elapsed 0.003 seconds) done.
[126257.937098] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[126257.938715] PM: Entering mem sleep
[126257.938748] Suspending console(s) (use no_console_suspend to debug)
[126257.939475] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[126257.939527] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[126257.939542] sd 1:0:0:0: [sdb] Stopping disk
[126257.939595] sd 0:0:0:0: [sda] Stopping disk
[126258.920055] PM: suspend of devices complete after 981.644 msecs
[126258.936069] PM: late suspend of devices complete after 16.010 msecs
[126258.937118] r8169 0000:03:00.0: System wakeup enabled by ACPI
[126258.952232] PM: noirq suspend of devices complete after 16.155 msecs
[126258.952893] ACPI: Preparing to enter system sleep state S3
[126258.976053] PM: Saving platform NVS memory
[126258.976065] Disabling non-boot CPUs ...
[126258.976145] intel_pstate CPU 1 exiting
[126258.977655] kvm: disabling virtualization on CPU1
[126258.977678] smpboot: CPU 1 is now offline
[126258.978963] intel_pstate CPU 2 exiting
[126258.980352] kvm: disabling virtualization on CPU2
[126258.980383] smpboot: CPU 2 is now offline
[126258.981677] intel_pstate CPU 3 exiting
[126258.983033] kvm: disabling virtualization on CPU3
[126258.983050] smpboot: CPU 3 is now offline
[126258.985306] ACPI: Low-level resume complete
[126258.985358] PM: Restoring platform NVS memory
[126258.985738] Enabling non-boot CPUs ...
[126258.985791] x86: Booting SMP configuration:
[126258.985792] smpboot: Booting Node 0 Processor 1 APIC 0x1
[126258.997160] Disabled fast string operations
[126258.997215] kvm: enabling virtualization on CPU1
[126258.999810] CPU1 is up
[126258.999840] smpboot: Booting Node 0 Processor 2 APIC 0x2
[126259.010794] Disabled fast string operations
[126259.010846] kvm: enabling virtualization on CPU2
[126259.013188] CPU2 is up
[126259.013221] smpboot: Booting Node 0 Processor 3 APIC 0x3
[126259.024177] Disabled fast string operations
[126259.024229] kvm: enabling virtualization on CPU3
[126259.026622] CPU3 is up
[126259.033820] ACPI : EC: 0 stale EC events cleared
[126259.033832] ACPI: Waking up from system sleep state S3
[126259.099786] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[126259.099834] PM: noirq resume of devices complete after 17.882 msecs
[126259.100345] PM: early resume of devices complete after 0.468 msecs
[126259.100701] r8169 0000:03:00.0: System wakeup disabled by ACPI
[126259.100721] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[126259.101145] rtc_cmos 00:01: System wakeup disabled by ACPI
[126259.107682] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[126259.112579] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[126259.112682] radeon 0000:01:00.0: WB enabled
[126259.112686] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[126259.112688] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[126259.113905] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[126259.125166] sd 0:0:0:0: [sda] Starting disk
[126259.125186] sd 1:0:0:0: [sdb] Starting disk
[126259.130230] [drm] ring test on 0 succeeded in 1 usecs
[126259.130236] [drm] ring test on 3 succeeded in 3 usecs
[126259.306037] [drm] ring test on 5 succeeded in 1 usecs
[126259.306042] [drm] UVD initialized successfully.
[126259.306122] [drm] ib test on ring 0 succeeded in 0 usecs
[126259.306191] [drm] ib test on ring 3 succeeded in 0 usecs
[126259.307684] r8169 0000:03:00.0 eth0: link down
[126259.333747] usb 3-1.2: reset high-speed USB device number 12 using ehci-pci
[126259.333757] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[126259.465512] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[126259.465537] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[126259.465558] ata4: SATA link down (SStatus 0 SControl 300)
[126259.467933] ata2.00: configured for UDMA/133
[126259.473578] ata5: SATA link down (SStatus 0 SControl 300)
[126259.480694] ata3.00: configured for UDMA/100
[126259.497632] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[126259.542385] usb 1-2: reset low-speed USB device number 4 using xhci_hcd
[126259.845030] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035139060
[126259.845054] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[126259.965340] [drm] ib test on ring 5 succeeded
[126259.975887] PM: resume of devices complete after 876.144 msecs
[126259.979665] PM: Finishing wakeup.
[126259.979666] Restarting tasks ... done.
[126260.006787] video LNXVIDEO:00: Restoring backlight state
[126260.006918] video LNXVIDEO:01: Restoring backlight state
[126260.171766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[126262.327637] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[126262.340475] ata1.00: configured for UDMA/133
[126262.729384] r8169 0000:03:00.0 eth0: link down
[126262.729456] r8169 0000:03:00.0 eth0: link down
[126262.730432] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[126262.737181] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[126265.209778] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[126265.209786] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[126265.209792] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[126265.729997] r8169 0000:03:00.0 eth0: link up
[126269.124957] wlan0: authenticate with 20:4e:7f:24:79:60
[126269.128365] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[126269.186383] wlan0: authenticated
[126269.186773] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[126269.187736] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[126269.190932] wlan0: associated
[128058.680272] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[128058.685020] cfg80211: Calling CRDA to update world regulatory domain
[128058.688343] cfg80211: World regulatory domain updated:
[128058.688347] cfg80211:  DFS Master region: unset
[128058.688348] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[128058.688351] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[128058.688353] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[128058.688354] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[128058.688356] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[128058.688357] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[128058.695768] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[128058.815268] PM: Syncing filesystems ... done.
[128059.313222] PM: Preparing system for mem sleep
[128059.434763] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[128059.434775] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[128059.434785] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[128059.455425] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[128059.459032] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[128059.459120] radeon 0000:01:00.0: WB enabled
[128059.459123] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[128059.459125] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[128059.460351] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[128059.476553] [drm] ring test on 0 succeeded in 1 usecs
[128059.476560] [drm] ring test on 3 succeeded in 3 usecs
[128059.672210] [drm] ring test on 5 succeeded in 1 usecs
[128059.672217] [drm] UVD initialized successfully.
[128059.672254] [drm] ib test on ring 0 succeeded in 0 usecs
[128059.672284] [drm] ib test on ring 3 succeeded in 0 usecs
[128060.329786] [drm] ib test on ring 5 succeeded
[128060.336585] Freezing user space processes ... (elapsed 0.002 seconds) done.
[128060.338875] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[128060.340172] PM: Entering mem sleep
[128060.340188] Suspending console(s) (use no_console_suspend to debug)
[128060.340522] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[128060.340560] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[128060.340581] sd 1:0:0:0: [sdb] Stopping disk
[128060.340601] sd 0:0:0:0: [sda] Stopping disk
[128061.436972] PM: suspend of devices complete after 1097.387 msecs
[128061.452996] PM: late suspend of devices complete after 16.019 msecs
[128061.454469] r8169 0000:03:00.0: System wakeup enabled by ACPI
[128061.469075] PM: noirq suspend of devices complete after 16.087 msecs
[128061.469341] ACPI: Preparing to enter system sleep state S3
[128061.492932] PM: Saving platform NVS memory
[128061.492938] Disabling non-boot CPUs ...
[128061.492979] intel_pstate CPU 1 exiting
[128061.494228] kvm: disabling virtualization on CPU1
[128061.494235] smpboot: CPU 1 is now offline
[128061.494823] intel_pstate CPU 2 exiting
[128061.496034] kvm: disabling virtualization on CPU2
[128061.496043] smpboot: CPU 2 is now offline
[128061.496346] intel_pstate CPU 3 exiting
[128061.497526] kvm: disabling virtualization on CPU3
[128061.497547] smpboot: CPU 3 is now offline
[128061.499218] ACPI: Low-level resume complete
[128061.499269] PM: Restoring platform NVS memory
[128061.499688] Enabling non-boot CPUs ...
[128061.499741] x86: Booting SMP configuration:
[128061.499742] smpboot: Booting Node 0 Processor 1 APIC 0x1
[128061.510701] Disabled fast string operations
[128061.510754] kvm: enabling virtualization on CPU1
[128061.513102] CPU1 is up
[128061.513133] smpboot: Booting Node 0 Processor 2 APIC 0x2
[128061.524086] Disabled fast string operations
[128061.524136] kvm: enabling virtualization on CPU2
[128061.526486] CPU2 is up
[128061.526517] smpboot: Booting Node 0 Processor 3 APIC 0x3
[128061.537471] Disabled fast string operations
[128061.537522] kvm: enabling virtualization on CPU3
[128061.539918] CPU3 is up
[128061.546407] ACPI : EC: 0 stale EC events cleared
[128061.546419] ACPI: Waking up from system sleep state S3
[128061.612159] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[128061.612432] PM: noirq resume of devices complete after 17.883 msecs
[128061.612988] PM: early resume of devices complete after 0.514 msecs
[128061.613974] rtc_cmos 00:01: System wakeup disabled by ACPI
[128061.614420] r8169 0000:03:00.0: System wakeup disabled by ACPI
[128061.615285] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[128061.620241] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[128061.625059] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[128061.625164] radeon 0000:01:00.0: WB enabled
[128061.625168] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[128061.625171] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[128061.626395] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[128061.642391] sd 0:0:0:0: [sda] Starting disk
[128061.642584] sd 1:0:0:0: [sdb] Starting disk
[128061.642719] [drm] ring test on 0 succeeded in 0 usecs
[128061.642726] [drm] ring test on 3 succeeded in 3 usecs
[128061.818541] [drm] ring test on 5 succeeded in 1 usecs
[128061.818546] [drm] UVD initialized successfully.
[128061.818626] [drm] ib test on ring 0 succeeded in 0 usecs
[128061.818693] [drm] ib test on ring 3 succeeded in 0 usecs
[128061.820195] r8169 0000:03:00.0 eth0: link down
[128061.842303] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[128061.846309] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[128061.962123] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[128061.964248] ata2.00: configured for UDMA/133
[128061.982162] ata5: SATA link down (SStatus 0 SControl 300)
[128061.982187] ata4: SATA link down (SStatus 0 SControl 300)
[128061.990140] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[128062.005512] ata3.00: configured for UDMA/100
[128062.006309] usb 3-1.2: reset high-speed USB device number 12 using ehci-pci
[128062.050944] usb 1-2: reset low-speed USB device number 4 using xhci_hcd
[128062.099430] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[128062.099448] PM: Device 3-1.2 failed to resume async: error -32
[128062.357756] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035139060
[128062.357768] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[128062.465893] [drm] ib test on ring 5 succeeded
[128062.476631] PM: resume of devices complete after 864.238 msecs
[128062.480436] PM: Finishing wakeup.
[128062.480438] Restarting tasks ... 
[128062.482632] usb 3-1.2: USB disconnect, device number 12
[128062.491476] done.
[128062.499195] video LNXVIDEO:00: Restoring backlight state
[128062.499353] video LNXVIDEO:01: Restoring backlight state
[128062.644517] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[128064.844213] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[128064.857238] ata1.00: configured for UDMA/133
[128064.960301] usb 3-1.2: new high-speed USB device number 13 using ehci-pci
[128065.052913] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[128065.052919] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[128065.052923] usb 3-1.2: Product: Cruzer Fit
[128065.052926] usb 3-1.2: Manufacturer: SanDisk
[128065.052929] usb 3-1.2: SerialNumber: 4C530007570515117331
[128065.053337] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[128065.053454] scsi host15: usb-storage 3-1.2:1.0
[128065.405896] r8169 0000:03:00.0 eth0: link down
[128065.405932] r8169 0000:03:00.0 eth0: link down
[128065.406782] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[128065.413574] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[128066.052804] scsi 15:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[128066.053237] sd 15:0:0:0: Attached scsi generic sg3 type 0
[128066.054811] sd 15:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[128066.056504] sd 15:0:0:0: [sdc] Write Protect is off
[128066.056508] sd 15:0:0:0: [sdc] Mode Sense: 43 00 00 00
[128066.057556] sd 15:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[128066.070952]  sdc: sdc1 sdc2 sdc3
[128066.074884] sd 15:0:0:0: [sdc] Attached SCSI removable disk
[128067.798319] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[128067.798328] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[128067.798334] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[128068.464014] r8169 0000:03:00.0 eth0: link up
[128071.885966] wlan0: authenticate with 20:4e:7f:24:79:60
[128071.888617] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[128071.961319] wlan0: authenticated
[128071.963228] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[128071.964205] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[128071.967438] wlan0: associated
[130156.113449] r8169 0000:03:00.0 eth0: link down
[132484.191348] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[132484.200415] cfg80211: Calling CRDA to update world regulatory domain
[132484.214391] cfg80211: World regulatory domain updated:
[132484.214400] cfg80211:  DFS Master region: unset
[132484.214404] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[132484.214412] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[132484.214418] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[132484.214428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[132484.214433] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[132484.214438] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[132484.219905] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[132484.440333] PM: Syncing filesystems ... done.
[132484.659044] PM: Preparing system for mem sleep
[132484.800772] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[132484.800794] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[132484.800812] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[132484.822244] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[132484.826353] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[132484.826454] radeon 0000:01:00.0: WB enabled
[132484.826459] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[132484.826462] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[132484.827685] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[132484.844027] [drm] ring test on 0 succeeded in 1 usecs
[132484.844035] [drm] ring test on 3 succeeded in 3 usecs
[132485.039721] [drm] ring test on 5 succeeded in 1 usecs
[132485.039729] [drm] UVD initialized successfully.
[132485.039768] [drm] ib test on ring 0 succeeded in 0 usecs
[132485.039802] [drm] ib test on ring 3 succeeded in 0 usecs
[132485.699439] [drm] ib test on ring 5 succeeded
[132485.712933] Freezing user space processes ... (elapsed 0.003 seconds) done.
[132485.716545] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[132485.717965] PM: Entering mem sleep
[132485.717997] Suspending console(s) (use no_console_suspend to debug)
[132485.718708] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[132485.718799] sd 1:0:0:0: [sdb] Stopping disk
[132485.718802] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[132485.718887] sd 0:0:0:0: [sda] Stopping disk
[132486.714724] PM: suspend of devices complete after 997.105 msecs
[132486.730717] PM: late suspend of devices complete after 15.990 msecs
[132486.731808] r8169 0000:03:00.0: System wakeup enabled by ACPI
[132486.746886] PM: noirq suspend of devices complete after 16.172 msecs
[132486.747484] ACPI: Preparing to enter system sleep state S3
[132486.770729] PM: Saving platform NVS memory
[132486.770741] Disabling non-boot CPUs ...
[132486.770822] intel_pstate CPU 1 exiting
[132486.772325] kvm: disabling virtualization on CPU1
[132486.772349] smpboot: CPU 1 is now offline
[132486.773718] intel_pstate CPU 2 exiting
[132486.775141] kvm: disabling virtualization on CPU2
[132486.775859] smpboot: CPU 2 is now offline
[132486.776453] intel_pstate CPU 3 exiting
[132486.777783] kvm: disabling virtualization on CPU3
[132486.777791] smpboot: CPU 3 is now offline
[132486.779925] ACPI: Low-level resume complete
[132486.779975] PM: Restoring platform NVS memory
[132486.780367] Enabling non-boot CPUs ...
[132486.780418] x86: Booting SMP configuration:
[132486.780419] smpboot: Booting Node 0 Processor 1 APIC 0x1
[132486.791787] Disabled fast string operations
[132486.791842] kvm: enabling virtualization on CPU1
[132486.794433] CPU1 is up
[132486.794463] smpboot: Booting Node 0 Processor 2 APIC 0x2
[132486.805415] Disabled fast string operations
[132486.805465] kvm: enabling virtualization on CPU2
[132486.807800] CPU2 is up
[132486.807831] smpboot: Booting Node 0 Processor 3 APIC 0x3
[132486.818785] Disabled fast string operations
[132486.818836] kvm: enabling virtualization on CPU3
[132486.821223] CPU3 is up
[132486.860415] ACPI : EC: 8 stale EC events cleared
[132486.860427] ACPI: Waking up from system sleep state S3
[132487.109780] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[132487.110352] PM: noirq resume of devices complete after 18.013 msecs
[132487.111107] PM: early resume of devices complete after 0.714 msecs
[132487.111545] r8169 0000:03:00.0: System wakeup disabled by ACPI
[132487.116759] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[132487.118346] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[132487.123013] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[132487.123115] radeon 0000:01:00.0: WB enabled
[132487.123119] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[132487.123121] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[132487.124346] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[132487.128408] sd 1:0:0:0: [sdb] Starting disk
[132487.128422] sd 0:0:0:0: [sda] Starting disk
[132487.140636] [drm] ring test on 0 succeeded in 1 usecs
[132487.140642] [drm] ring test on 3 succeeded in 3 usecs
[132487.221806] rtc_cmos 00:01: System wakeup disabled by ACPI
[132487.326392] [drm] ring test on 5 succeeded in 2 usecs
[132487.326397] [drm] UVD initialized successfully.
[132487.326478] [drm] ib test on ring 0 succeeded in 0 usecs
[132487.326546] [drm] ib test on ring 3 succeeded in 0 usecs
[132487.328045] r8169 0000:03:00.0 eth0: link down
[132487.332260] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[132487.332273] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[132487.448021] ata4: SATA link down (SStatus 0 SControl 300)
[132487.463998] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[132487.466188] ata2.00: configured for UDMA/133
[132487.471988] ata5: SATA link down (SStatus 0 SControl 300)
[132487.480046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[132487.495229] ata3.00: configured for UDMA/100
[132487.496186] usb 3-1.2: reset high-speed USB device number 13 using ehci-pci
[132487.589320] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[132487.589338] PM: Device 3-1.2 failed to resume async: error -32
[132487.975793] [drm] ib test on ring 5 succeeded
[132487.987484] PM: resume of devices complete after 876.975 msecs
[132487.995597] PM: Finishing wakeup.
[132487.995600] Restarting tasks ... 
[132488.001407] usb 3-1.2: USB disconnect, device number 13
[132488.009894] done.
[132488.026923] usb 1-2: USB disconnect, device number 4
[132488.028088] video LNXVIDEO:00: Restoring backlight state
[132488.028244] video LNXVIDEO:01: Restoring backlight state
[132488.074336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[132488.177612] r8169 0000:03:00.0 eth0: link down
[132488.178810] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[132488.185578] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[132490.126217] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[132490.138895] ata1.00: configured for UDMA/133
[132490.242294] usb 3-1.2: new high-speed USB device number 14 using ehci-pci
[132490.334957] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[132490.334966] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[132490.334979] usb 3-1.2: Product: Cruzer Fit
[132490.334982] usb 3-1.2: Manufacturer: SanDisk
[132490.334986] usb 3-1.2: SerialNumber: 4C530007570515117331
[132490.335469] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[132490.335633] scsi host16: usb-storage 3-1.2:1.0
[132491.334387] scsi 16:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[132491.335664] sd 16:0:0:0: Attached scsi generic sg3 type 0
[132491.337326] sd 16:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[132491.338878] sd 16:0:0:0: [sdc] Write Protect is off
[132491.338887] sd 16:0:0:0: [sdc] Mode Sense: 43 00 00 00
[132491.339879] sd 16:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[132491.352699]  sdc: sdc1 sdc2 sdc3
[132491.363851] sd 16:0:0:0: [sdc] Attached SCSI removable disk
[132494.568067] wlan0: authenticate with 20:4e:7f:24:79:60
[132494.574092] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[132494.628652] wlan0: authenticated
[132494.631132] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[132494.632060] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[132494.634743] wlan0: associated
[132497.719279] audit: type=1400 audit(1432229125.943:34): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=8875 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[132499.811669] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[132499.811678] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[132499.811684] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[132523.498001] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[132649.114815] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[132649.332555] usb 1-2: New USB device found, idVendor=046d, idProduct=c06c
[132649.332569] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[132649.332578] usb 1-2: Product: USB Optical Mouse
[132649.332585] usb 1-2: Manufacturer: Logitech
[132649.333001] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[132649.337424] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb1/1-2/1-2:1.0/0003:046D:C06C.0004/input/input16
[132649.391054] hid-generic 0003:046D:C06C.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:04:00.0-2/input0
[132658.117297] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[132658.117305] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[132658.117312] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[132658.137383] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[132658.141100] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[132658.141191] radeon 0000:01:00.0: WB enabled
[132658.141195] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[132658.141197] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[132658.142422] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[132658.158621] [drm] ring test on 0 succeeded in 1 usecs
[132658.158630] [drm] ring test on 3 succeeded in 3 usecs
[132658.344372] [drm] ring test on 5 succeeded in 1 usecs
[132658.344379] [drm] UVD initialized successfully.
[132658.344416] [drm] ib test on ring 0 succeeded in 0 usecs
[132658.344447] [drm] ib test on ring 3 succeeded in 0 usecs
[132659.003102] [drm] ib test on ring 5 succeeded
[132664.544649] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[132664.544656] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[132664.544662] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[134457.898133] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[134457.902171] cfg80211: Calling CRDA to update world regulatory domain
[134457.909665] cfg80211: World regulatory domain updated:
[134457.909674] cfg80211:  DFS Master region: unset
[134457.909678] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[134457.909687] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[134457.909693] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[134457.909699] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[134457.909704] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[134457.909710] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[134457.922981] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[134458.086190] PM: Syncing filesystems ... done.
[134458.393807] PM: Preparing system for mem sleep
[134458.538209] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[134458.538223] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[134458.538234] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[134458.562119] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[134458.567306] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[134458.567429] radeon 0000:01:00.0: WB enabled
[134458.567436] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[134458.567440] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[134458.568673] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[134458.585100] [drm] ring test on 0 succeeded in 1 usecs
[134458.585112] [drm] ring test on 3 succeeded in 3 usecs
[134458.770926] [drm] ring test on 5 succeeded in 1 usecs
[134458.770935] [drm] UVD initialized successfully.
[134458.770977] [drm] ib test on ring 0 succeeded in 0 usecs
[134458.771013] [drm] ib test on ring 3 succeeded in 0 usecs
[134459.417138] [drm] ib test on ring 5 succeeded
[134459.427398] Freezing user space processes ... (elapsed 0.003 seconds) done.
[134459.430784] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[134459.432383] PM: Entering mem sleep
[134459.432417] Suspending console(s) (use no_console_suspend to debug)
[134459.433265] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[134459.433335] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[134459.433356] sd 1:0:0:0: [sdb] Stopping disk
[134459.433389] sd 0:0:0:0: [sda] Stopping disk
[134460.440442] PM: suspend of devices complete after 1008.364 msecs
[134460.456491] PM: late suspend of devices complete after 16.046 msecs
[134460.457483] r8169 0000:03:00.0: System wakeup enabled by ACPI
[134460.472627] PM: noirq suspend of devices complete after 16.137 msecs
[134460.473289] ACPI: Preparing to enter system sleep state S3
[134460.496436] PM: Saving platform NVS memory
[134460.496448] Disabling non-boot CPUs ...
[134460.496527] intel_pstate CPU 1 exiting
[134460.498029] kvm: disabling virtualization on CPU1
[134460.498052] smpboot: CPU 1 is now offline
[134460.499344] intel_pstate CPU 2 exiting
[134460.500739] kvm: disabling virtualization on CPU2
[134460.501396] smpboot: CPU 2 is now offline
[134460.502135] intel_pstate CPU 3 exiting
[134460.502442] Broke affinity for irq 16
[134460.502453] Broke affinity for irq 23
[134460.502461] Broke affinity for irq 25
[134460.502483] Broke affinity for irq 31
[134460.503510] kvm: disabling virtualization on CPU3
[134460.503521] smpboot: CPU 3 is now offline
[134460.505776] ACPI: Low-level resume complete
[134460.505826] PM: Restoring platform NVS memory
[134460.506243] Enabling non-boot CPUs ...
[134460.506293] x86: Booting SMP configuration:
[134460.506294] smpboot: Booting Node 0 Processor 1 APIC 0x1
[134460.517661] Disabled fast string operations
[134460.517716] kvm: enabling virtualization on CPU1
[134460.520288] CPU1 is up
[134460.520318] smpboot: Booting Node 0 Processor 2 APIC 0x2
[134460.531271] Disabled fast string operations
[134460.531321] kvm: enabling virtualization on CPU2
[134460.533658] CPU2 is up
[134460.533689] smpboot: Booting Node 0 Processor 3 APIC 0x3
[134460.544644] Disabled fast string operations
[134460.544694] kvm: enabling virtualization on CPU3
[134460.547093] CPU3 is up
[134460.554197] ACPI : EC: 0 stale EC events cleared
[134460.554209] ACPI: Waking up from system sleep state S3
[134460.618541] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[134460.619991] PM: noirq resume of devices complete after 17.661 msecs
[134460.620434] PM: early resume of devices complete after 0.402 msecs
[134460.622266] rtc_cmos 00:01: System wakeup disabled by ACPI
[134460.624688] r8169 0000:03:00.0: System wakeup disabled by ACPI
[134460.624706] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[134460.643394] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[134460.647665] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[134460.647763] radeon 0000:01:00.0: WB enabled
[134460.647766] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[134460.647768] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[134460.648990] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[134460.656549] sd 0:0:0:0: [sda] Starting disk
[134460.656569] sd 1:0:0:0: [sdb] Starting disk
[134460.665354] [drm] ring test on 0 succeeded in 1 usecs
[134460.665362] [drm] ring test on 3 succeeded in 3 usecs
[134460.841229] [drm] ring test on 5 succeeded in 1 usecs
[134460.841234] [drm] UVD initialized successfully.
[134460.841314] [drm] ib test on ring 0 succeeded in 0 usecs
[134460.841381] [drm] ib test on ring 3 succeeded in 0 usecs
[134460.842883] r8169 0000:03:00.0 eth0: link down
[134460.858024] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[134460.858167] usb 3-1.2: reset high-speed USB device number 14 using ehci-pci
[134460.973928] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[134460.975908] ata2.00: configured for UDMA/133
[134460.989909] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[134460.989932] ata5: SATA link down (SStatus 0 SControl 300)
[134460.997970] ata4: SATA link down (SStatus 0 SControl 300)
[134461.005060] ata3.00: configured for UDMA/100
[134461.022127] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[134461.058771] usb 1-2: reset low-speed USB device number 5 using xhci_hcd
[134461.365515] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035cf4720
[134461.365544] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[134461.489750] [drm] ib test on ring 5 succeeded
[134461.501216] PM: resume of devices complete after 881.370 msecs
[134461.509194] PM: Finishing wakeup.
[134461.509197] Restarting tasks ... done.
[134461.536291] video LNXVIDEO:00: Restoring backlight state
[134461.536456] video LNXVIDEO:01: Restoring backlight state
[134461.586899] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[134461.695490] r8169 0000:03:00.0 eth0: link down
[134461.696665] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[134461.703438] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[134463.840036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[134463.852759] ata1.00: configured for UDMA/133
[134467.257984] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[134467.258000] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[134467.258011] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[134470.012870] wlan0: authenticate with 20:4e:7f:24:79:60
[134470.015466] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[134470.076900] wlan0: authenticated
[134470.079826] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[134470.080789] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[134470.083832] wlan0: associated
[135965.754969] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[135965.759500] cfg80211: Calling CRDA to update world regulatory domain
[135965.767886] cfg80211: World regulatory domain updated:
[135965.767897] cfg80211:  DFS Master region: unset
[135965.767901] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[135965.767911] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[135965.767918] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[135965.767922] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[135965.767926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[135965.767929] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[135965.775782] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[135965.892988] PM: Syncing filesystems ... done.
[135966.270580] PM: Preparing system for mem sleep
[135966.391113] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[135966.391125] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[135966.391134] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[135966.412025] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[135966.415760] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[135966.415853] radeon 0000:01:00.0: WB enabled
[135966.415857] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[135966.415859] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[135966.417088] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[135966.433324] [drm] ring test on 0 succeeded in 1 usecs
[135966.433331] [drm] ring test on 3 succeeded in 3 usecs
[135966.628990] [drm] ring test on 5 succeeded in 1 usecs
[135966.628997] [drm] UVD initialized successfully.
[135966.629035] [drm] ib test on ring 0 succeeded in 0 usecs
[135966.629066] [drm] ib test on ring 3 succeeded in 0 usecs
[135967.298076] [drm] ib test on ring 5 succeeded
[135967.312617] Freezing user space processes ... (elapsed 0.003 seconds) done.
[135967.315825] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[135967.317256] PM: Entering mem sleep
[135967.317287] Suspending console(s) (use no_console_suspend to debug)
[135967.317987] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[135967.318072] sd 1:0:0:0: [sdb] Stopping disk
[135967.318379] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[135967.318461] sd 0:0:0:0: [sda] Stopping disk
[135968.325381] PM: suspend of devices complete after 1008.479 msecs
[135968.341315] PM: late suspend of devices complete after 15.930 msecs
[135968.343608] r8169 0000:03:00.0: System wakeup enabled by ACPI
[135968.357509] PM: noirq suspend of devices complete after 16.189 msecs
[135968.358169] ACPI: Preparing to enter system sleep state S3
[135968.381342] PM: Saving platform NVS memory
[135968.381354] Disabling non-boot CPUs ...
[135968.381435] intel_pstate CPU 1 exiting
[135968.382955] kvm: disabling virtualization on CPU1
[135968.382977] smpboot: CPU 1 is now offline
[135968.384288] intel_pstate CPU 2 exiting
[135968.385712] kvm: disabling virtualization on CPU2
[135968.386282] smpboot: CPU 2 is now offline
[135968.386980] intel_pstate CPU 3 exiting
[135968.388316] kvm: disabling virtualization on CPU3
[135968.388327] smpboot: CPU 3 is now offline
[135968.390550] ACPI: Low-level resume complete
[135968.390601] PM: Restoring platform NVS memory
[135968.391016] Enabling non-boot CPUs ...
[135968.391091] x86: Booting SMP configuration:
[135968.391092] smpboot: Booting Node 0 Processor 1 APIC 0x1
[135968.402460] Disabled fast string operations
[135968.402515] kvm: enabling virtualization on CPU1
[135968.405103] CPU1 is up
[135968.405134] smpboot: Booting Node 0 Processor 2 APIC 0x2
[135968.416088] Disabled fast string operations
[135968.416141] kvm: enabling virtualization on CPU2
[135968.418477] CPU2 is up
[135968.418510] smpboot: Booting Node 0 Processor 3 APIC 0x3
[135968.429466] Disabled fast string operations
[135968.429518] kvm: enabling virtualization on CPU3
[135968.431922] CPU3 is up
[135968.439044] ACPI : EC: 0 stale EC events cleared
[135968.439056] ACPI: Waking up from system sleep state S3
[135968.504773] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[135968.505063] PM: noirq resume of devices complete after 17.843 msecs
[135968.505546] PM: early resume of devices complete after 0.442 msecs
[135968.507132] rtc_cmos 00:01: System wakeup disabled by ACPI
[135968.507189] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[135968.507194] r8169 0000:03:00.0: System wakeup disabled by ACPI
[135968.514767] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[135968.518836] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[135968.518942] radeon 0000:01:00.0: WB enabled
[135968.518945] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[135968.518947] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[135968.520181] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[135968.536490] [drm] ring test on 0 succeeded in 1 usecs
[135968.536497] [drm] ring test on 3 succeeded in 3 usecs
[135968.537637] sd 0:0:0:0: [sda] Starting disk
[135968.537642] sd 1:0:0:0: [sdb] Starting disk
[135968.712316] [drm] ring test on 5 succeeded in 1 usecs
[135968.712321] [drm] UVD initialized successfully.
[135968.712402] [drm] ib test on ring 0 succeeded in 0 usecs
[135968.712469] [drm] ib test on ring 3 succeeded in 0 usecs
[135968.713967] r8169 0000:03:00.0 eth0: link down
[135968.730972] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[135968.734953] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[135968.850770] ata4: SATA link down (SStatus 0 SControl 300)
[135968.858754] ata5: SATA link down (SStatus 0 SControl 300)
[135968.866806] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[135968.874806] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[135968.877319] ata2.00: configured for UDMA/133
[135968.881986] ata3.00: configured for UDMA/100
[135968.898817] usb 3-1.2: reset high-speed USB device number 14 using ehci-pci
[135968.943644] usb 1-2: reset low-speed USB device number 5 using xhci_hcd
[135968.991834] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[135968.991840] PM: Device 3-1.2 failed to resume async: error -32
[135969.250364] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035cf4720
[135969.250390] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[135969.358607] [drm] ib test on ring 5 succeeded
[135969.369604] PM: resume of devices complete after 864.654 msecs
[135969.377862] PM: Finishing wakeup.
[135969.377865] Restarting tasks ... 
[135969.380002] usb 3-1.2: USB disconnect, device number 14
[135969.385447] done.
[135969.398167] video LNXVIDEO:00: Restoring backlight state
[135969.398372] video LNXVIDEO:01: Restoring backlight state
[135969.457023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[135969.572348] r8169 0000:03:00.0 eth0: link down
[135969.573514] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[135969.580385] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[135971.736780] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[135971.749674] ata1.00: configured for UDMA/133
[135971.852879] usb 3-1.2: new high-speed USB device number 15 using ehci-pci
[135971.947514] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[135971.947520] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[135971.947523] usb 3-1.2: Product: Cruzer Fit
[135971.947526] usb 3-1.2: Manufacturer: SanDisk
[135971.947528] usb 3-1.2: SerialNumber: 4C530007570515117331
[135971.947912] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[135971.951087] scsi host17: usb-storage 3-1.2:1.0
[135972.949397] scsi 17:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[135972.950333] sd 17:0:0:0: Attached scsi generic sg3 type 0
[135972.951433] sd 17:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[135972.956052] sd 17:0:0:0: [sdc] Write Protect is off
[135972.956064] sd 17:0:0:0: [sdc] Mode Sense: 43 00 00 00
[135972.957126] sd 17:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[135972.970543]  sdc: sdc1 sdc2 sdc3
[135972.974697] sd 17:0:0:0: [sdc] Attached SCSI removable disk
[135975.202496] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[135975.202504] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[135975.202510] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[135975.823658] wlan0: authenticate with 20:4e:7f:24:79:60
[135975.826167] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[135975.878493] wlan0: authenticated
[135975.881880] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[135975.882717] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[135975.884950] wlan0: associated
[135985.099841] r8169 0000:03:00.0 eth0: link up
[136737.596575] wlan0: deauthenticating from 20:4e:7f:24:79:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[136737.605993] cfg80211: Calling CRDA to update world regulatory domain
[136737.612946] cfg80211: World regulatory domain updated:
[136737.612953] cfg80211:  DFS Master region: unset
[136737.612955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[136737.612960] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[136737.612964] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[136737.612966] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[136737.612969] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[136737.612972] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[136737.620735] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[136737.777923] PM: Syncing filesystems ... done.
[136738.261666] PM: Preparing system for mem sleep
[136738.407146] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[136738.407157] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[136738.407167] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[136738.428616] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[136738.432777] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[136738.432879] radeon 0000:01:00.0: WB enabled
[136738.432884] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[136738.432887] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[136738.434109] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[136738.450412] [drm] ring test on 0 succeeded in 1 usecs
[136738.450420] [drm] ring test on 3 succeeded in 3 usecs
[136738.636170] [drm] ring test on 5 succeeded in 1 usecs
[136738.636178] [drm] UVD initialized successfully.
[136738.636225] [drm] ib test on ring 0 succeeded in 0 usecs
[136738.636258] [drm] ib test on ring 3 succeeded in 0 usecs
[136739.285987] [drm] ib test on ring 5 succeeded
[136739.295571] Freezing user space processes ... (elapsed 0.002 seconds) done.
[136739.298044] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[136739.299490] PM: Entering mem sleep
[136739.299522] Suspending console(s) (use no_console_suspend to debug)
[136739.300194] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[136739.300288] sd 1:0:0:0: [sdb] Stopping disk
[136739.300301] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[136739.300347] sd 0:0:0:0: [sda] Stopping disk
[136740.293248] PM: suspend of devices complete after 994.070 msecs
[136740.309210] PM: late suspend of devices complete after 15.959 msecs
[136740.310555] r8169 0000:03:00.0: System wakeup enabled by ACPI
[136740.325483] PM: noirq suspend of devices complete after 16.276 msecs
[136740.326151] ACPI: Preparing to enter system sleep state S3
[136740.349281] PM: Saving platform NVS memory
[136740.349294] Disabling non-boot CPUs ...
[136740.349375] intel_pstate CPU 1 exiting
[136740.350888] kvm: disabling virtualization on CPU1
[136740.351590] smpboot: CPU 1 is now offline
[136740.352338] intel_pstate CPU 2 exiting
[136740.353752] kvm: disabling virtualization on CPU2
[136740.354471] smpboot: CPU 2 is now offline
[136740.355132] intel_pstate CPU 3 exiting
[136740.355447] Broke affinity for irq 23
[136740.355456] Broke affinity for irq 25
[136740.355477] Broke affinity for irq 31
[136740.356506] kvm: disabling virtualization on CPU3
[136740.356529] smpboot: CPU 3 is now offline
[136740.358954] ACPI: Low-level resume complete
[136740.359003] PM: Restoring platform NVS memory
[136740.359410] Enabling non-boot CPUs ...
[136740.359461] x86: Booting SMP configuration:
[136740.359462] smpboot: Booting Node 0 Processor 1 APIC 0x1
[136740.370418] Disabled fast string operations
[136740.370471] kvm: enabling virtualization on CPU1
[136740.372823] CPU1 is up
[136740.372854] smpboot: Booting Node 0 Processor 2 APIC 0x2
[136740.383806] Disabled fast string operations
[136740.383858] kvm: enabling virtualization on CPU2
[136740.386194] CPU2 is up
[136740.386225] smpboot: Booting Node 0 Processor 3 APIC 0x3
[136740.397182] Disabled fast string operations
[136740.397234] kvm: enabling virtualization on CPU3
[136740.399632] CPU3 is up
[136740.407115] ACPI : EC: 0 stale EC events cleared
[136740.407126] ACPI: Waking up from system sleep state S3
[136740.472416] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[136740.473127] PM: noirq resume of devices complete after 17.835 msecs
[136740.473696] PM: early resume of devices complete after 0.501 msecs
[136740.475236] r8169 0000:03:00.0: System wakeup disabled by ACPI
[136740.475741] rtc_cmos 00:01: System wakeup disabled by ACPI
[136740.479586] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[136740.481038] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[136740.487823] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[136740.487929] radeon 0000:01:00.0: WB enabled
[136740.487933] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[136740.487935] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[136740.489161] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[136740.497778] sd 0:0:0:0: [sda] Starting disk
[136740.497813] sd 1:0:0:0: [sdb] Starting disk
[136740.505480] [drm] ring test on 0 succeeded in 0 usecs
[136740.505487] [drm] ring test on 3 succeeded in 3 usecs
[136740.681293] [drm] ring test on 5 succeeded in 1 usecs
[136740.681298] [drm] UVD initialized successfully.
[136740.681377] [drm] ib test on ring 0 succeeded in 0 usecs
[136740.681444] [drm] ib test on ring 3 succeeded in 0 usecs
[136740.682948] r8169 0000:03:00.0 eth0: link down
[136740.707043] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci
[136740.707055] usb 4-1.5: reset full-speed USB device number 3 using ehci-pci
[136740.838880] ata4: SATA link down (SStatus 0 SControl 300)
[136740.838903] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[136740.838927] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[136740.841130] ata2.00: configured for UDMA/133
[136740.850836] ata5: SATA link down (SStatus 0 SControl 300)
[136740.854085] ata3.00: configured for UDMA/100
[136740.870923] usb 3-1.2: reset high-speed USB device number 15 using ehci-pci
[136740.915653] usb 1-2: reset low-speed USB device number 5 using xhci_hcd
[136740.964259] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[136740.964276] PM: Device 3-1.2 failed to resume async: error -32
[136741.218336] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035cf4720
[136741.218349] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[136741.330608] [drm] ib test on ring 5 succeeded
[136741.341130] PM: resume of devices complete after 868.028 msecs
[136741.344988] PM: Finishing wakeup.
[136741.344989] Restarting tasks ... 
[136741.349300] usb 3-1.2: USB disconnect, device number 15
[136741.353556] done.
[136741.365036] video LNXVIDEO:00: Restoring backlight state
[136741.365175] video LNXVIDEO:01: Restoring backlight state
[136741.540414] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[136743.708889] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[136743.721533] ata1.00: configured for UDMA/133
[136743.833018] usb 3-1.2: new high-speed USB device number 16 using ehci-pci
[136743.925576] usb 3-1.2: New USB device found, idVendor=0781, idProduct=5571
[136743.925581] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[136743.925584] usb 3-1.2: Product: Cruzer Fit
[136743.925585] usb 3-1.2: Manufacturer: SanDisk
[136743.925587] usb 3-1.2: SerialNumber: 4C530007570515117331
[136743.925904] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[136743.926012] scsi host18: usb-storage 3-1.2:1.0
[136744.142659] r8169 0000:03:00.0 eth0: link down
[136744.142697] r8169 0000:03:00.0 eth0: link down
[136744.143812] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[136744.150608] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[136744.925216] scsi 18:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
[136744.925587] sd 18:0:0:0: Attached scsi generic sg3 type 0
[136744.927160] sd 18:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[136744.928841] sd 18:0:0:0: [sdc] Write Protect is off
[136744.928846] sd 18:0:0:0: [sdc] Mode Sense: 43 00 00 00
[136744.929879] sd 18:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[136744.942720]  sdc: sdc1 sdc2 sdc3
[136744.946494] sd 18:0:0:0: [sdc] Attached SCSI removable disk
[136746.675056] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[136746.675065] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[136746.675071] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[136747.120545] r8169 0000:03:00.0 eth0: link up
[136750.551517] wlan0: authenticate with 20:4e:7f:24:79:60
[136750.553720] wlan0: send auth to 20:4e:7f:24:79:60 (try 1/3)
[136750.630920] wlan0: authenticated
[136750.632148] wlan0: associate with 20:4e:7f:24:79:60 (try 1/3)
[136750.633084] wlan0: RX AssocResp from 20:4e:7f:24:79:60 (capab=0x11 status=0 aid=1)
[136750.635749] wlan0: associated
[138298.005582] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._ON_] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[138298.005610] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[138298.005636] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[138298.026332] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[138298.030238] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[138298.030331] radeon 0000:01:00.0: WB enabled
[138298.030334] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b4610c00
[138298.030337] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b4610c0c
[138298.031560] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900053b2118
[138298.047750] [drm] ring test on 0 succeeded in 1 usecs
[138298.047759] [drm] ring test on 3 succeeded in 3 usecs
[138298.233510] [drm] ring test on 5 succeeded in 1 usecs
[138298.233519] [drm] UVD initialized successfully.
[138298.233561] [drm] ib test on ring 0 succeeded in 0 usecs
[138298.233595] [drm] ib test on ring 3 succeeded in 0 usecs
[138298.891697] [drm] ib test on ring 5 succeeded
[138301.760010] audit: type=1400 audit(1432241187.148:35): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=13144 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[138304.691809] ACPI Error: [\_SB_.PCI0.PEG0.PEGP._OFF] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[138304.691817] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.PX02] (Node ffff8801b90cc708), AE_NOT_FOUND (20141107/psparse-536)
[138304.691823] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.ATPX] (Node ffff8801b90cc690), AE_NOT_FOUND (20141107/psparse-536)
[138314.908664] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[138376.270513] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)