Ubuntu
linux package

package linux-image-3.13.0-52-generic 3.13.0-52.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2

Bug #1456738 reported by Klaus Dorbath
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Expired
Low
Unassigned

Bug Description

Failure since ....3.13-0-51-generic

version log:
Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17

lspci -vnvn.log:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03)
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
 Capabilities: [e4] Vendor Specific Information: Len=05 <?>
 Capabilities: [a0] AGP version 2.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
 Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
 I/O behind bridge: 0000b000-0000bfff
 Memory behind bridge: dfd00000-dfdfffff
 Prefetchable memory behind bridge: afc00000-bfbfffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at df20 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) (prog-if 00 [UHCI])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 4: I/O ports at df40 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) (prog-if 00 [UHCI])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at df80 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 23
 Region 0: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=0080
 Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
 Latency: 0
 Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
 I/O behind bridge: 0000c000-0000cfff
 Memory behind bridge: dfe00000-dfefffff
 Prefetchable memory behind bridge: 80000000-83ffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 18
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374
 Region 4: I/O ports at ffa0 [size=16]
 Region 5: Memory at 84000000 (32-bit, non-prefetchable) [size=1K]
 Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 0
 Region 4: I/O ports at 0540 [size=32]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 0: I/O ports at e000 [size=256]
 Region 1: I/O ports at e100 [size=64]
 Region 2: Memory at 84000400 (32-bit, non-prefetchable) [size=512]
 Region 3: Memory at 84000600 (32-bit, non-prefetchable) [size=256]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: snd_intel8x0

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 02) (prog-if 00 [Generic])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 17
 Region 0: I/O ports at e200 [size=256]
 Region 1: I/O ports at e300 [size=128]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (2000ns min), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
 Region 1: I/O ports at b000 [size=256]
 Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
 Expansion ROM at dfdc0000 [disabled] [size=128K]
 Capabilities: [58] AGP version 2.0
  Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: radeon

02:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972]
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
 Memory window 0: 80000000-83ffffff (prefetchable)
 Memory window 1: 8c000000-8fffffff
 I/O window 0: 0000c000-0000c0ff
 I/O window 1: 0000c400-0000c4ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
 16-bit legacy interface ports at 0001
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  Bridge: PM- B3+
 Kernel driver in use: yenta_cardbus

02:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (8000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
 Region 0: Memory at dfeff800 (32-bit, non-prefetchable) [size=2K]
 Region 1: I/O ports at cc00 [size=128]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: firewire_ohci

02:0c.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]
 Subsystem: Fujitsu Technology Solutions Device [1734:102a]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (2750ns min, 13000ns max)
 Interrupt: pin A routed to IRQ 17
 Region 0: I/O ports at c800 [size=256]
 Region 1: Memory at dfefe000 (32-bit, non-prefetchable) [size=4K]
 Expansion ROM at dfee0000 [disabled] [size=64K]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: natsemi

03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR5212/AR5213 Wireless Network Adapter [168c:0013] (rev 01)
 Subsystem: Actiontec Electronics Inc IBM HighRate 11 a/b/g Wireless CardBus Adapter [1668:1026]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=64K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: ath5k

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-52-generic 3.13.0-52.86
ProcVersionSignature: Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17
Uname: Linux 3.13.0-49-generic i686
ApportVersion: 2.14.1-0ubuntu3.10
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: klaus 2289 F.... pulseaudio
Date: Tue May 19 19:15:16 2015
DuplicateSignature: package:linux-image-3.13.0-52-generic:3.13.0-52.86:subprocess installed post-installation script returned error exit status 2
ErrorMessage: subprocess installed post-installation script returned error exit status 2
HibernationDevice: RESUME=UUID=05097382-4bdf-4e8d-81ee-476116efcd27
InstallationDate: Installed on 2014-09-13 (248 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140722.2)
Lsusb:
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 004 Device 002: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: FUJITSU SIEMENS Amilo D Series
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   3.3V
  32-bit
  PC Card
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-49-generic root=/dev/mapper/ubuntu--vg-root ro drm.debug=0xe plymouth:debug
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.1
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
SourcePackage: linux
Title: package linux-image-3.13.0-52-generic 3.13.0-52.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/19/2003
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1.08
dmi.board.name: 755IA5
dmi.board.vendor: Uniwill
dmi.chassis.type: 10
dmi.chassis.vendor: FUJITSU SIEMENS
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.08:bd11/19/2003:svnFUJITSUSIEMENS:pnAmiloDSeries:pvr:rvnUniwill:rn755IA5:rvr:cvnFUJITSUSIEMENS:ct10:cvr:
dmi.product.name: Amilo D Series
dmi.sys.vendor: FUJITSU SIEMENS

Revision history for this message
Klaus Dorbath (klaus-dorbath) wrote :
Apport retracing service (apport)
tags: removed: need-duplicate-check
Revision history for this message
Brad Figg (brad-figg) wrote : Status changed to Confirmed

This change was made by a bot.

Changed in linux (Ubuntu):
status: New → Confirmed
Revision history for this message
Joseph Salisbury (jsalisbury) wrote :

You may need to run the following from a terminal:

sudo apt-get install -f
sudo apt-get clean
sudo apt-get update

Then re-install the package.

If that does not resolve your issue, please mark the bug as "Confirmed"

Changed in linux (Ubuntu):
importance: Undecided → Low
status: Confirmed → Incomplete
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.