Apr 30 08:39:41 testmono dhclient: DHCPREQUEST of 10.0.0.239 on eth0 to 10.0.0.4 port 67 (xid=0x174586e4) Apr 30 08:39:41 testmono dhclient: DHCPACK of 10.0.0.239 from 10.0.0.4 Apr 30 08:39:41 testmono dhclient: bound to 10.0.0.239 -- renewal in 19322 seconds. Apr 30 14:01:43 testmono dhclient: DHCPREQUEST of 10.0.0.239 on eth0 to 10.0.0.4 port 67 (xid=0x174586e4) Apr 30 14:01:43 testmono dhclient: DHCPACK of 10.0.0.239 from 10.0.0.4 Apr 30 14:01:43 testmono dhclient: bound to 10.0.0.239 -- renewal in 16786 seconds. Apr 30 18:41:30 testmono dhclient: DHCPREQUEST of 10.0.0.239 on eth0 to 10.0.0.4 port 67 (xid=0x174586e4) Apr 30 18:41:30 testmono dhclient: DHCPACK of 10.0.0.239 from 10.0.0.4 Apr 30 18:41:30 testmono dhclient: bound to 10.0.0.239 -- renewal in 17912 seconds. Apr 30 18:52:28 testmono kernel: [74466.781613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Apr 30 18:52:28 testmono kernel: [74466.810441] JFS: nTxBlock = 8192, nTxLock = 65536 Apr 30 18:52:28 testmono kernel: [74466.860954] ntfs: driver 2.1.30 [Flags: R/O MODULE]. Apr 30 18:52:28 testmono kernel: [74466.942239] QNX4 filesystem 0.2.3 registered. Apr 30 18:52:28 testmono kernel: [74467.032138] raid6: sse2x1 3579 MB/s Apr 30 18:52:28 testmono kernel: [74467.100254] raid6: sse2x2 4042 MB/s Apr 30 18:52:28 testmono kernel: [74467.168613] raid6: sse2x4 5972 MB/s Apr 30 18:52:28 testmono kernel: [74467.168641] raid6: using algorithm sse2x4 (5972 MB/s) Apr 30 18:52:28 testmono kernel: [74467.168657] raid6: using ssse3x2 recovery algorithm Apr 30 18:52:28 testmono kernel: [74467.173923] xor: measuring software checksum speed Apr 30 18:52:28 testmono kernel: [74467.212142] prefetch64-sse: 8593.000 MB/sec Apr 30 18:52:28 testmono kernel: [74467.252202] generic_sse: 9015.000 MB/sec Apr 30 18:52:28 testmono kernel: [74467.252213] xor: using function: generic_sse (9015.000 MB/sec) Apr 30 18:52:28 testmono kernel: [74467.360623] Btrfs loaded Apr 30 18:53:05 testmono kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 30 18:53:05 testmono kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 30 18:53:05 testmono kernel: [ 0.000000] Initializing cgroup subsys cpuacct Apr 30 18:53:05 testmono kernel: [ 0.000000] Linux version 3.13.0-51-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #84-Ubuntu SMP Wed Apr 15 12:08:34 UTC 2015 (Ubuntu 3.13.0-51.84-generic 3.13.11-ckt18) Apr 30 18:53:05 testmono kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-51-generic root=UUID=68da7e09-1a91-4107-859d-bf452f9ed992 ro Apr 30 18:53:05 testmono kernel: [ 0.000000] KERNEL supported cpus: Apr 30 18:53:05 testmono kernel: [ 0.000000] Intel GenuineIntel Apr 30 18:53:05 testmono kernel: [ 0.000000] AMD AuthenticAMD Apr 30 18:53:05 testmono kernel: [ 0.000000] Centaur CentaurHauls Apr 30 18:53:05 testmono kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffeffff] usable Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] ACPI data Apr 30 18:53:05 testmono kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved Apr 30 18:53:05 testmono kernel: [ 0.000000] NX (Execute Disable) protection: active Apr 30 18:53:05 testmono kernel: [ 0.000000] SMBIOS 2.5 present. Apr 30 18:53:05 testmono kernel: [ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Apr 30 18:53:05 testmono kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Apr 30 18:53:05 testmono kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable Apr 30 18:53:05 testmono kernel: [ 0.000000] No AGP bridge found Apr 30 18:53:05 testmono kernel: [ 0.000000] e820: last_pfn = 0xbfff0 max_arch_pfn = 0x400000000 Apr 30 18:53:05 testmono kernel: [ 0.000000] MTRR default type: uncachable Apr 30 18:53:05 testmono kernel: [ 0.000000] MTRR variable ranges disabled: Apr 30 18:53:05 testmono kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Apr 30 18:53:05 testmono kernel: [ 0.000000] CPU MTRRs all blank - virtualized system. Apr 30 18:53:05 testmono kernel: [ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0] Apr 30 18:53:05 testmono kernel: [ 0.000000] Scanning 1 areas for low memory corruption Apr 30 18:53:05 testmono kernel: [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0x00000000-0x000fffff] page 4k Apr 30 18:53:05 testmono kernel: [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE Apr 30 18:53:05 testmono kernel: [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE Apr 30 18:53:05 testmono kernel: [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M Apr 30 18:53:05 testmono kernel: [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0xbc000000-0xbfbfffff] page 2M Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0x80000000-0xbbffffff] page 2M Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0x00100000-0x001fffff] page 4k Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M Apr 30 18:53:05 testmono kernel: [ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbffeffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [mem 0xbfe00000-0xbffeffff] page 4k Apr 30 18:53:05 testmono kernel: [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE Apr 30 18:53:05 testmono kernel: [ 0.000000] RAMDISK: [mem 0x37484000-0x37a39fff] Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: RSDP 00000000000e0000 000024 (v02 VBOX ) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: XSDT 00000000bfff0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: FACP 00000000bfff00f0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: DSDT 00000000bfff0470 001B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: FACS 00000000bfff0200 000040 Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: APIC 00000000bfff0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: SSDT 00000000bfff02a0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 30 18:53:05 testmono kernel: [ 0.000000] No NUMA configuration found Apr 30 18:53:05 testmono kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffeffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbffeffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] NODE_DATA [mem 0xbffeb000-0xbffeffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc400000-ffff8800bf3fffff] on node 0 Apr 30 18:53:05 testmono kernel: [ 0.000000] Zone ranges: Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] Normal empty Apr 30 18:53:05 testmono kernel: [ 0.000000] Movable zone start for each node Apr 30 18:53:05 testmono kernel: [ 0.000000] Early memory node ranges Apr 30 18:53:05 testmono kernel: [ 0.000000] node 0: [mem 0x00001000-0x0009efff] Apr 30 18:53:05 testmono kernel: [ 0.000000] node 0: [mem 0x00100000-0xbffeffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] On node 0 totalpages: 786318 Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA zone: 64 pages used for memmap Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA zone: 21 pages reserved Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA32 zone: 12224 pages used for memmap Apr 30 18:53:05 testmono kernel: [ 0.000000] DMA32 zone: 782320 pages, LIFO batch:31 Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Apr 30 18:53:05 testmono kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: IRQ0 used by override. Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: IRQ2 used by override. Apr 30 18:53:05 testmono kernel: [ 0.000000] ACPI: IRQ9 used by override. Apr 30 18:53:05 testmono kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Apr 30 18:53:05 testmono kernel: [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs Apr 30 18:53:05 testmono kernel: [ 0.000000] nr_irqs_gsi: 40 Apr 30 18:53:05 testmono kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] Apr 30 18:53:05 testmono kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] Apr 30 18:53:05 testmono kernel: [ 0.000000] e820: [mem 0xc0000000-0xfffbffff] available for PCI devices Apr 30 18:53:05 testmono kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Apr 30 18:53:05 testmono kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Apr 30 18:53:05 testmono kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfa00000 s81536 r8192 d20864 u1048576 Apr 30 18:53:05 testmono kernel: [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152 Apr 30 18:53:05 testmono kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Apr 30 18:53:05 testmono kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 774009 Apr 30 18:53:05 testmono kernel: [ 0.000000] Policy zone: DMA32 Apr 30 18:53:05 testmono kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-51-generic root=UUID=68da7e09-1a91-4107-859d-bf452f9ed992 ro Apr 30 18:53:05 testmono kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Apr 30 18:53:05 testmono kernel: [ 0.000000] Checking aperture... Apr 30 18:53:05 testmono kernel: [ 0.000000] No AGP bridge found Apr 30 18:53:05 testmono kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Apr 30 18:53:05 testmono kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Apr 30 18:53:05 testmono kernel: [ 0.000000] Memory: 3073420K/3145272K available (7389K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 71852K reserved) Apr 30 18:53:05 testmono kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Apr 30 18:53:05 testmono kernel: [ 0.000000] Hierarchical RCU implementation. Apr 30 18:53:05 testmono kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Apr 30 18:53:05 testmono kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. Apr 30 18:53:05 testmono kernel: [ 0.000000] Offload RCU callbacks from all CPUs Apr 30 18:53:05 testmono kernel: [ 0.000000] Offload RCU callbacks from CPUs: 0-1. Apr 30 18:53:05 testmono kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Apr 30 18:53:05 testmono kernel: [ 0.000000] Console: colour dummy device 80x25 Apr 30 18:53:05 testmono kernel: [ 0.000000] console [tty0] enabled Apr 30 18:53:05 testmono kernel: [ 0.000000] allocated 12582912 bytes of page_cgroup Apr 30 18:53:05 testmono kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Apr 30 18:53:05 testmono kernel: [ 0.000000] tsc: Fast TSC calibration failed Apr 30 18:53:05 testmono kernel: [ 0.000000] tsc: Unable to calibrate against PIT Apr 30 18:53:05 testmono kernel: [ 0.000000] tsc: using PMTIMER reference calibration Apr 30 18:53:05 testmono kernel: [ 0.000000] tsc: Detected 2638.232 MHz processor Apr 30 18:53:05 testmono kernel: [ 0.016011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5276.46 BogoMIPS (lpj=10552928) Apr 30 18:53:05 testmono kernel: [ 0.016020] pid_max: default: 32768 minimum: 301 Apr 30 18:53:05 testmono kernel: [ 0.016077] Security Framework initialized Apr 30 18:53:05 testmono kernel: [ 0.016121] AppArmor: AppArmor initialized Apr 30 18:53:05 testmono kernel: [ 0.016128] Yama: becoming mindful. Apr 30 18:53:05 testmono kernel: [ 0.016854] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Apr 30 18:53:05 testmono kernel: [ 0.018314] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Apr 30 18:53:05 testmono kernel: [ 0.020455] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Apr 30 18:53:05 testmono kernel: [ 0.020471] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Apr 30 18:53:05 testmono kernel: [ 0.020749] Initializing cgroup subsys memory Apr 30 18:53:05 testmono kernel: [ 0.020763] Initializing cgroup subsys devices Apr 30 18:53:05 testmono kernel: [ 0.020774] Initializing cgroup subsys freezer Apr 30 18:53:05 testmono kernel: [ 0.020782] Initializing cgroup subsys blkio Apr 30 18:53:05 testmono kernel: [ 0.020790] Initializing cgroup subsys perf_event Apr 30 18:53:05 testmono kernel: [ 0.020800] Initializing cgroup subsys hugetlb Apr 30 18:53:05 testmono kernel: [ 0.020988] CPU: Physical Processor ID: 0 Apr 30 18:53:05 testmono kernel: [ 0.020996] CPU: Processor Core ID: 0 Apr 30 18:53:05 testmono kernel: [ 0.021009] mce: CPU supports 0 MCE banks Apr 30 18:53:05 testmono kernel: [ 0.021071] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Apr 30 18:53:05 testmono kernel: [ 0.021071] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 Apr 30 18:53:05 testmono kernel: [ 0.021071] tlb_flushall_shift: 6 Apr 30 18:53:05 testmono kernel: [ 0.021446] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) Apr 30 18:53:05 testmono kernel: [ 0.033746] ACPI: Core revision 20131115 Apr 30 18:53:05 testmono kernel: [ 0.034698] ACPI: All ACPI Tables successfully acquired Apr 30 18:53:05 testmono kernel: [ 0.035197] ftrace: allocating 28576 entries in 112 pages Apr 30 18:53:05 testmono kernel: [ 0.052767] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 30 18:53:05 testmono kernel: [ 0.095652] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 04) Apr 30 18:53:05 testmono kernel: [ 0.096000] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. Apr 30 18:53:05 testmono kernel: [ 0.096000] x86: Booting SMP configuration: Apr 30 18:53:05 testmono kernel: [ 0.106521] NMI watchdog: disabled (cpu0): hardware events not enabled Apr 30 18:53:05 testmono kernel: [ 0.096000] mce: CPU supports 0 MCE banks Apr 30 18:53:05 testmono kernel: [ 0.096000] .... node #0, CPUs: #1 Apr 30 18:53:05 testmono kernel: [ 0.108131] x86: Booted up 1 node, 2 CPUs Apr 30 18:53:05 testmono kernel: [ 0.108141] smpboot: Total of 2 processors activated (10552.92 BogoMIPS) Apr 30 18:53:05 testmono kernel: [ 0.109139] devtmpfs: initialized Apr 30 18:53:05 testmono kernel: [ 0.113387] EVM: security.selinux Apr 30 18:53:05 testmono kernel: [ 0.113394] EVM: security.SMACK64 Apr 30 18:53:05 testmono kernel: [ 0.113400] EVM: security.ima Apr 30 18:53:05 testmono kernel: [ 0.113406] EVM: security.capability Apr 30 18:53:05 testmono kernel: [ 0.113720] pinctrl core: initialized pinctrl subsystem Apr 30 18:53:05 testmono kernel: [ 0.113828] regulator-dummy: no parameters Apr 30 18:53:05 testmono kernel: [ 0.113903] RTC time: 16:52:58, date: 04/30/15 Apr 30 18:53:05 testmono kernel: [ 0.113954] NET: Registered protocol family 16 Apr 30 18:53:05 testmono kernel: [ 0.114131] cpuidle: using governor ladder Apr 30 18:53:05 testmono kernel: [ 0.114139] cpuidle: using governor menu Apr 30 18:53:05 testmono kernel: [ 0.114178] ACPI: bus type PCI registered Apr 30 18:53:05 testmono kernel: [ 0.114186] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Apr 30 18:53:05 testmono kernel: [ 0.114349] PCI: Using configuration type 1 for base access Apr 30 18:53:05 testmono kernel: [ 0.117274] bio: create slab at 0 Apr 30 18:53:05 testmono kernel: [ 0.117274] ACPI: Added _OSI(Module Device) Apr 30 18:53:05 testmono kernel: [ 0.117274] ACPI: Added _OSI(Processor Device) Apr 30 18:53:05 testmono kernel: [ 0.117274] ACPI: Added _OSI(3.0 _SCP Extensions) Apr 30 18:53:05 testmono kernel: [ 0.117274] ACPI: Added _OSI(Processor Aggregator Device) Apr 30 18:53:05 testmono kernel: [ 0.117322] ACPI: Executed 1 blocks of module-level executable AML code Apr 30 18:53:05 testmono kernel: [ 0.122607] ACPI: Interpreter enabled Apr 30 18:53:05 testmono kernel: [ 0.122620] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) Apr 30 18:53:05 testmono kernel: [ 0.122632] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) Apr 30 18:53:05 testmono kernel: [ 0.122643] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) Apr 30 18:53:05 testmono kernel: [ 0.122654] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) Apr 30 18:53:05 testmono kernel: [ 0.122668] ACPI: (supports S0 S5) Apr 30 18:53:05 testmono kernel: [ 0.122675] ACPI: Using IOAPIC for interrupt routing Apr 30 18:53:05 testmono kernel: [ 0.122979] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Apr 30 18:53:05 testmono kernel: [ 0.123040] ACPI: No dock devices found. Apr 30 18:53:05 testmono kernel: [ 0.127388] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Apr 30 18:53:05 testmono kernel: [ 0.127401] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] Apr 30 18:53:05 testmono kernel: [ 0.127412] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM Apr 30 18:53:05 testmono kernel: [ 0.127532] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Apr 30 18:53:05 testmono kernel: [ 0.127539] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Apr 30 18:53:05 testmono kernel: [ 0.127545] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Apr 30 18:53:05 testmono kernel: [ 0.127550] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff] (ignored) Apr 30 18:53:05 testmono kernel: [ 0.127556] PCI: root bus 00: using default resources Apr 30 18:53:05 testmono kernel: [ 0.127563] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. Apr 30 18:53:05 testmono kernel: [ 0.127875] PCI host bridge to bus 0000:00 Apr 30 18:53:05 testmono kernel: [ 0.127887] pci_bus 0000:00: root bus resource [bus 00-ff] Apr 30 18:53:05 testmono kernel: [ 0.127894] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] Apr 30 18:53:05 testmono kernel: [ 0.127901] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] Apr 30 18:53:05 testmono kernel: [ 0.127963] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 Apr 30 18:53:05 testmono kernel: [ 0.128718] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 Apr 30 18:53:05 testmono kernel: [ 0.129678] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a Apr 30 18:53:05 testmono kernel: [ 0.130232] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f] Apr 30 18:53:05 testmono kernel: [ 0.130800] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000 Apr 30 18:53:05 testmono kernel: [ 0.132412] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref] Apr 30 18:53:05 testmono kernel: [ 0.149060] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 Apr 30 18:53:05 testmono kernel: [ 0.152230] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff] Apr 30 18:53:05 testmono kernel: [ 0.156335] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017] Apr 30 18:53:05 testmono kernel: [ 0.169659] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000 Apr 30 18:53:05 testmono kernel: [ 0.172332] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f] Apr 30 18:53:05 testmono kernel: [ 0.176317] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff] Apr 30 18:53:05 testmono kernel: [ 0.180435] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref] Apr 30 18:53:05 testmono kernel: [ 0.196114] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100 Apr 30 18:53:05 testmono kernel: [ 0.196380] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff] Apr 30 18:53:05 testmono kernel: [ 0.196569] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f] Apr 30 18:53:05 testmono kernel: [ 0.197983] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310 Apr 30 18:53:05 testmono kernel: [ 0.200419] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff] Apr 30 18:53:05 testmono kernel: [ 0.219712] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000 Apr 30 18:53:05 testmono kernel: [ 0.221041] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601 Apr 30 18:53:05 testmono kernel: [ 0.223466] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247] Apr 30 18:53:05 testmono kernel: [ 0.228178] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257] Apr 30 18:53:05 testmono kernel: [ 0.232216] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f] Apr 30 18:53:05 testmono kernel: [ 0.234573] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff] Apr 30 18:53:05 testmono kernel: [ 0.238101] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11) Apr 30 18:53:05 testmono kernel: [ 0.240184] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11) Apr 30 18:53:05 testmono kernel: [ 0.240325] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) Apr 30 18:53:05 testmono kernel: [ 0.240465] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) Apr 30 18:53:05 testmono kernel: [ 0.240656] ACPI: Enabled 1 GPEs in block 00 to 07 Apr 30 18:53:05 testmono kernel: [ 0.240675] ACPI: \_SB_.PCI0: notify handler is installed Apr 30 18:53:05 testmono kernel: [ 0.240694] Found 1 acpi root devices Apr 30 18:53:05 testmono kernel: [ 0.240983] vgaarb: setting as boot device: PCI:0000:00:02.0 Apr 30 18:53:05 testmono kernel: [ 0.240983] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Apr 30 18:53:05 testmono kernel: [ 0.240983] vgaarb: loaded Apr 30 18:53:05 testmono kernel: [ 0.240983] vgaarb: bridge control possible 0000:00:02.0 Apr 30 18:53:05 testmono kernel: [ 0.240983] SCSI subsystem initialized Apr 30 18:53:05 testmono kernel: [ 0.240983] libata version 3.00 loaded. Apr 30 18:53:05 testmono kernel: [ 0.240983] ACPI: bus type USB registered Apr 30 18:53:05 testmono kernel: [ 0.240983] usbcore: registered new interface driver usbfs Apr 30 18:53:05 testmono kernel: [ 0.240983] usbcore: registered new interface driver hub Apr 30 18:53:05 testmono kernel: [ 0.240983] usbcore: registered new device driver usb Apr 30 18:53:05 testmono kernel: [ 0.240983] PCI: Using ACPI for IRQ routing Apr 30 18:53:05 testmono kernel: [ 0.240983] PCI: pci_cache_line_size set to 64 bytes Apr 30 18:53:05 testmono kernel: [ 0.240983] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] Apr 30 18:53:05 testmono kernel: [ 0.240983] e820: reserve RAM buffer [mem 0xbfff0000-0xbfffffff] Apr 30 18:53:05 testmono kernel: [ 0.240983] NetLabel: Initializing Apr 30 18:53:05 testmono kernel: [ 0.240983] NetLabel: domain hash size = 128 Apr 30 18:53:05 testmono kernel: [ 0.240983] NetLabel: protocols = UNLABELED CIPSOv4 Apr 30 18:53:05 testmono kernel: [ 0.240983] NetLabel: unlabeled traffic allowed by default Apr 30 18:53:05 testmono kernel: [ 0.240999] Switched to clocksource refined-jiffies Apr 30 18:53:05 testmono kernel: [ 0.252345] AppArmor: AppArmor Filesystem Enabled Apr 30 18:53:05 testmono kernel: [ 0.252388] pnp: PnP ACPI init Apr 30 18:53:05 testmono kernel: [ 0.252407] ACPI: bus type PNP registered Apr 30 18:53:05 testmono kernel: [ 0.252531] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) Apr 30 18:53:05 testmono kernel: [ 0.252545] pnp 00:01: [dma 4] Apr 30 18:53:05 testmono kernel: [ 0.252564] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) Apr 30 18:53:05 testmono kernel: [ 0.252672] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active) Apr 30 18:53:05 testmono kernel: [ 0.252730] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) Apr 30 18:53:05 testmono kernel: [ 0.253461] pnp: PnP ACPI: found 4 devices Apr 30 18:53:05 testmono kernel: [ 0.253471] ACPI: bus type PNP unregistered Apr 30 18:53:05 testmono kernel: [ 0.280143] Switched to clocksource acpi_pm Apr 30 18:53:05 testmono kernel: [ 0.280164] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] Apr 30 18:53:05 testmono kernel: [ 0.280169] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] Apr 30 18:53:05 testmono kernel: [ 0.280210] NET: Registered protocol family 2 Apr 30 18:53:05 testmono kernel: [ 0.280561] TCP established hash table entries: 32768 (order: 6, 262144 bytes) Apr 30 18:53:05 testmono kernel: [ 0.280731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) Apr 30 18:53:05 testmono kernel: [ 0.280878] TCP: Hash tables configured (established 32768 bind 32768) Apr 30 18:53:05 testmono kernel: [ 0.281440] TCP: reno registered Apr 30 18:53:05 testmono kernel: [ 0.281457] UDP hash table entries: 2048 (order: 4, 65536 bytes) Apr 30 18:53:05 testmono kernel: [ 0.281504] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) Apr 30 18:53:05 testmono kernel: [ 0.281614] NET: Registered protocol family 1 Apr 30 18:53:05 testmono kernel: [ 0.281635] pci 0000:00:00.0: Limiting direct PCI/PCI transfers Apr 30 18:53:05 testmono kernel: [ 0.281700] pci 0000:00:01.0: Activating ISA DMA hang workarounds Apr 30 18:53:05 testmono kernel: [ 0.281771] pci 0000:00:02.0: Video device with shadowed ROM Apr 30 18:53:05 testmono kernel: [ 0.336967] PCI: CLS 0 bytes, default 64 Apr 30 18:53:05 testmono kernel: [ 0.337112] Trying to unpack rootfs image as initramfs... Apr 30 18:53:05 testmono kernel: [ 0.467838] Freeing initrd memory: 5848K (ffff880037484000 - ffff880037a3a000) Apr 30 18:53:05 testmono kernel: [ 0.468313] platform rtc_cmos: registered platform RTC device (no PNP device found) Apr 30 18:53:05 testmono kernel: [ 0.468695] microcode: CPU0 sig=0x106a4, pf=0x4, revision=0x616 Apr 30 18:53:05 testmono kernel: [ 0.468723] microcode: CPU1 sig=0x106a4, pf=0x4, revision=0x616 Apr 30 18:53:05 testmono kernel: [ 0.468980] microcode: Microcode Update Driver: v2.00 , Peter Oruba Apr 30 18:53:05 testmono kernel: [ 0.468990] Scanning for low memory corruption every 60 seconds Apr 30 18:53:05 testmono kernel: [ 0.469447] Initialise system trusted keyring Apr 30 18:53:05 testmono kernel: [ 0.469521] audit: initializing netlink socket (disabled) Apr 30 18:53:05 testmono kernel: [ 0.469541] type=2000 audit(1430412777.468:1): initialized Apr 30 18:53:05 testmono kernel: [ 0.512220] HugeTLB registered 2 MB page size, pre-allocated 0 pages Apr 30 18:53:05 testmono kernel: [ 0.516751] zbud: loaded Apr 30 18:53:05 testmono kernel: [ 0.517785] VFS: Disk quotas dquot_6.5.2 Apr 30 18:53:05 testmono kernel: [ 0.517884] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Apr 30 18:53:05 testmono kernel: [ 0.519679] fuse init (API version 7.22) Apr 30 18:53:05 testmono kernel: [ 0.520287] msgmni has been set to 6014 Apr 30 18:53:05 testmono kernel: [ 0.520440] Key type big_key registered Apr 30 18:53:05 testmono kernel: [ 0.528528] Key type asymmetric registered Apr 30 18:53:05 testmono kernel: [ 0.528544] Asymmetric key parser 'x509' registered Apr 30 18:53:05 testmono kernel: [ 0.528637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Apr 30 18:53:05 testmono kernel: [ 0.529018] io scheduler noop registered Apr 30 18:53:05 testmono kernel: [ 0.529031] io scheduler deadline registered (default) Apr 30 18:53:05 testmono kernel: [ 0.529097] io scheduler cfq registered Apr 30 18:53:05 testmono kernel: [ 0.529263] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Apr 30 18:53:05 testmono kernel: [ 0.529298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Apr 30 18:53:05 testmono kernel: [ 0.529388] vesafb: mode is 640x480x32, linelength=2560, pages=0 Apr 30 18:53:05 testmono kernel: [ 0.529399] vesafb: scrolling: redraw Apr 30 18:53:05 testmono kernel: [ 0.529409] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Apr 30 18:53:05 testmono kernel: [ 0.529552] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000780000, using 1216k, total 1216k Apr 30 18:53:05 testmono kernel: [ 0.533806] Console: switching to colour frame buffer device 80x30 Apr 30 18:53:05 testmono kernel: [ 0.536012] fb0: VESA VGA frame buffer device Apr 30 18:53:05 testmono kernel: [ 0.536329] intel_idle: does not run on family 6 model 26 Apr 30 18:53:05 testmono kernel: [ 0.536343] ipmi message handler version 39.2 Apr 30 18:53:05 testmono kernel: [ 0.536500] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Apr 30 18:53:05 testmono kernel: [ 0.536731] ACPI: AC Adapter [AC] (on-line) Apr 30 18:53:05 testmono kernel: [ 0.537752] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Apr 30 18:53:05 testmono kernel: [ 0.538886] ACPI: Power Button [PWRF] Apr 30 18:53:05 testmono kernel: [ 0.539511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 Apr 30 18:53:05 testmono kernel: [ 0.540689] ACPI: Sleep Button [SLPF] Apr 30 18:53:05 testmono kernel: [ 0.541629] GHES: HEST is not enabled! Apr 30 18:53:05 testmono kernel: [ 0.542506] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Apr 30 18:53:05 testmono kernel: [ 0.553396] Linux agpgart interface v0.103 Apr 30 18:53:05 testmono kernel: [ 0.560557] brd: module loaded Apr 30 18:53:05 testmono kernel: [ 0.564522] loop: module loaded Apr 30 18:53:05 testmono kernel: [ 0.565320] ata_piix 0000:00:01.1: version 2.13 Apr 30 18:53:05 testmono kernel: [ 0.566221] scsi0 : ata_piix Apr 30 18:53:05 testmono kernel: [ 0.567242] scsi1 : ata_piix Apr 30 18:53:05 testmono kernel: [ 0.567859] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 Apr 30 18:53:05 testmono kernel: [ 0.568331] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 Apr 30 18:53:05 testmono kernel: [ 0.569274] libphy: Fixed MDIO Bus: probed Apr 30 18:53:05 testmono kernel: [ 0.569888] tun: Universal TUN/TAP device driver, 1.6 Apr 30 18:53:05 testmono kernel: [ 0.570393] tun: (C) 1999-2004 Max Krasnyansky Apr 30 18:53:05 testmono kernel: [ 0.571497] PPP generic driver version 2.4.2 Apr 30 18:53:05 testmono kernel: [ 0.572589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 30 18:53:05 testmono kernel: [ 0.574753] ehci-pci: EHCI PCI platform driver Apr 30 18:53:05 testmono kernel: [ 0.575301] ehci-platform: EHCI generic platform driver Apr 30 18:53:05 testmono kernel: [ 0.575906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Apr 30 18:53:05 testmono kernel: [ 0.577151] ohci-pci: OHCI PCI platform driver Apr 30 18:53:05 testmono kernel: [ 0.578471] ohci-pci 0000:00:06.0: OHCI PCI host controller Apr 30 18:53:05 testmono kernel: [ 0.579007] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1 Apr 30 18:53:05 testmono kernel: [ 0.580196] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000 Apr 30 18:53:05 testmono kernel: [ 0.636820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Apr 30 18:53:05 testmono kernel: [ 0.639718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Apr 30 18:53:05 testmono kernel: [ 0.641273] usb usb1: Product: OHCI PCI host controller Apr 30 18:53:05 testmono kernel: [ 0.641755] usb usb1: Manufacturer: Linux 3.13.0-51-generic ohci_hcd Apr 30 18:53:05 testmono kernel: [ 0.642243] usb usb1: SerialNumber: 0000:00:06.0 Apr 30 18:53:05 testmono kernel: [ 0.643197] hub 1-0:1.0: USB hub found Apr 30 18:53:05 testmono kernel: [ 0.643746] hub 1-0:1.0: 8 ports detected Apr 30 18:53:05 testmono kernel: [ 0.644640] ohci-platform: OHCI generic platform driver Apr 30 18:53:05 testmono kernel: [ 0.645070] uhci_hcd: USB Universal Host Controller Interface driver Apr 30 18:53:05 testmono kernel: [ 0.645556] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Apr 30 18:53:05 testmono kernel: [ 0.647603] serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 30 18:53:05 testmono kernel: [ 0.648163] serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 30 18:53:05 testmono kernel: [ 0.648789] mousedev: PS/2 mouse device common for all mice Apr 30 18:53:05 testmono kernel: [ 0.650479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 Apr 30 18:53:05 testmono kernel: [ 0.652475] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 Apr 30 18:53:05 testmono kernel: [ 0.653198] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram Apr 30 18:53:05 testmono kernel: [ 0.653964] device-mapper: uevent: version 1.0.3 Apr 30 18:53:05 testmono kernel: [ 0.655371] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com Apr 30 18:53:05 testmono kernel: [ 0.658108] ledtrig-cpu: registered to indicate activity on CPUs Apr 30 18:53:05 testmono kernel: [ 0.659544] TCP: cubic registered Apr 30 18:53:05 testmono kernel: [ 0.660387] NET: Registered protocol family 10 Apr 30 18:53:05 testmono kernel: [ 0.661281] NET: Registered protocol family 17 Apr 30 18:53:05 testmono kernel: [ 0.661890] Key type dns_resolver registered Apr 30 18:53:05 testmono kernel: [ 0.663508] Loading compiled-in X.509 certificates Apr 30 18:53:05 testmono kernel: [ 0.665379] Loaded X.509 cert 'Magrathea: Glacier signing key: 822a539beb8b756f177fe044df9855a99939619e' Apr 30 18:53:05 testmono kernel: [ 0.666615] registered taskstats version 1 Apr 30 18:53:05 testmono kernel: [ 0.672566] Key type trusted registered Apr 30 18:53:05 testmono kernel: [ 0.681453] Key type encrypted registered Apr 30 18:53:05 testmono kernel: [ 0.683170] AppArmor: AppArmor sha1 policy hashing enabled Apr 30 18:53:05 testmono kernel: [ 0.683672] IMA: No TPM chip found, activating TPM-bypass! Apr 30 18:53:05 testmono kernel: [ 0.684719] regulator-dummy: disabling Apr 30 18:53:05 testmono kernel: [ 0.685631] Magic number: 11:279:895 Apr 30 18:53:05 testmono kernel: [ 0.686426] rtc_cmos rtc_cmos: setting system clock to 2015-04-30 16:52:58 UTC (1430412778) Apr 30 18:53:05 testmono kernel: [ 0.687738] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Apr 30 18:53:05 testmono kernel: [ 0.688439] EDD information not available. Apr 30 18:53:05 testmono kernel: [ 0.689060] PM: Hibernation image not present or could not be loaded. Apr 30 18:53:05 testmono kernel: [ 0.726173] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 Apr 30 18:53:05 testmono kernel: [ 0.729757] ata2.00: configured for UDMA/33 Apr 30 18:53:05 testmono kernel: [ 0.731901] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 Apr 30 18:53:05 testmono kernel: [ 0.735261] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray Apr 30 18:53:05 testmono kernel: [ 0.736013] cdrom: Uniform CD-ROM driver Revision: 3.20 Apr 30 18:53:05 testmono kernel: [ 0.737810] sr 1:0:0:0: Attached scsi CD-ROM sr0 Apr 30 18:53:05 testmono kernel: [ 0.738620] sr 1:0:0:0: Attached scsi generic sg0 type 5 Apr 30 18:53:05 testmono kernel: [ 0.744305] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) Apr 30 18:53:05 testmono kernel: [ 0.745449] Write protecting the kernel read-only data: 12288k Apr 30 18:53:05 testmono kernel: [ 0.751148] Freeing unused kernel memory: 792K (ffff88000173a000 - ffff880001800000) Apr 30 18:53:05 testmono kernel: [ 0.757986] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) Apr 30 18:53:05 testmono kernel: [ 0.783712] systemd-udevd[101]: starting version 204 Apr 30 18:53:05 testmono kernel: [ 0.823731] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI Apr 30 18:53:05 testmono kernel: [ 0.827625] e1000: Copyright (c) 1999-2006 Intel Corporation. Apr 30 18:53:05 testmono kernel: [ 1.052506] usb 1-1: new full-speed USB device number 2 using ohci-pci Apr 30 18:53:05 testmono kernel: [ 1.310174] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:f0:b8:b7 Apr 30 18:53:05 testmono kernel: [ 1.312097] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection Apr 30 18:53:05 testmono kernel: [ 1.312174] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021 Apr 30 18:53:05 testmono kernel: [ 1.312179] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Apr 30 18:53:05 testmono kernel: [ 1.312183] usb 1-1: Product: USB Tablet Apr 30 18:53:05 testmono kernel: [ 1.312188] usb 1-1: Manufacturer: VirtualBox Apr 30 18:53:05 testmono kernel: [ 1.315175] ahci 0000:00:0d.0: version 3.0 Apr 30 18:53:05 testmono kernel: [ 1.316140] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled Apr 30 18:53:05 testmono kernel: [ 1.316887] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode Apr 30 18:53:05 testmono kernel: [ 1.318032] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc Apr 30 18:53:05 testmono kernel: [ 1.319304] scsi2 : ahci Apr 30 18:53:05 testmono kernel: [ 1.320146] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21 Apr 30 18:53:05 testmono kernel: [ 1.499428] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 Apr 30 18:53:05 testmono kernel: [ 1.640262] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 30 18:53:05 testmono kernel: [ 1.642115] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 Apr 30 18:53:05 testmono kernel: [ 1.642654] ata3.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 31/32) Apr 30 18:53:05 testmono kernel: [ 1.643389] ata3.00: configured for UDMA/133 Apr 30 18:53:05 testmono kernel: [ 1.644543] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 Apr 30 18:53:05 testmono kernel: [ 1.647361] sd 2:0:0:0: [sda] 167772160 512-byte logical blocks: (85.8 GB/80.0 GiB) Apr 30 18:53:05 testmono kernel: [ 1.648797] sd 2:0:0:0: Attached scsi generic sg1 type 0 Apr 30 18:53:05 testmono kernel: [ 1.648875] sd 2:0:0:0: [sda] Write Protect is off Apr 30 18:53:05 testmono kernel: [ 1.648882] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Apr 30 18:53:05 testmono kernel: [ 1.648992] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 30 18:53:05 testmono kernel: [ 1.690500] sda: sda1 sda2 < sda5 > Apr 30 18:53:05 testmono kernel: [ 1.696370] sd 2:0:0:0: [sda] Attached SCSI disk Apr 30 18:53:05 testmono kernel: [ 1.862350] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Apr 30 18:53:05 testmono kernel: [ 2.395320] random: init urandom read with 61 bits of entropy available Apr 30 18:53:05 testmono kernel: [ 2.470280] Switched to clocksource tsc Apr 30 18:53:05 testmono kernel: [ 2.661346] init: plymouth-upstart-bridge main process (156) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.663526] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.670129] init: plymouth-upstart-bridge main process (165) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.673010] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.678163] init: plymouth-upstart-bridge main process (166) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.679848] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.686911] init: plymouth-upstart-bridge main process (168) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.690099] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.696334] init: plymouth-upstart-bridge main process (170) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.697760] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.703722] init: plymouth-upstart-bridge main process (173) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.706081] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.715944] init: plymouth-upstart-bridge main process (175) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.717300] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.724351] init: plymouth-upstart-bridge main process (177) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.726130] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.733134] init: plymouth-upstart-bridge main process (179) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.735503] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 2.742850] init: plymouth-upstart-bridge main process (181) terminated with status 1 Apr 30 18:53:05 testmono kernel: [ 2.745491] init: plymouth-upstart-bridge main process ended, respawning Apr 30 18:53:05 testmono kernel: [ 3.448579] random: nonblocking pool is initialized Apr 30 18:53:05 testmono kernel: [ 5.558594] Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k FS Apr 30 18:53:05 testmono kernel: [ 5.679412] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Apr 30 18:53:05 testmono kernel: [ 5.887740] systemd-udevd[291]: starting version 204 Apr 30 18:53:05 testmono kernel: [ 6.123680] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Apr 30 18:53:05 testmono kernel: [ 6.137982] parport_pc 00:03: reported by Plug and Play ACPI Apr 30 18:53:05 testmono kernel: [ 6.141503] lp: driver loaded but no devices found Apr 30 18:53:05 testmono kernel: [ 6.711722] ppdev: user-space parallel port driver Apr 30 18:53:05 testmono kernel: [ 7.386436] type=1400 audit(1430412785.194:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=361 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 7.386888] type=1400 audit(1430412785.194:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=361 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 7.396373] type=1400 audit(1430412785.206:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 7.439872] type=1400 audit(1430412785.246:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=342 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 7.444507] type=1400 audit(1430412785.254:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=342 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 7.444898] type=1400 audit(1430412785.254:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser" Apr 30 18:53:05 testmono dhclient: Internet Systems Consortium DHCP Client 4.2.4 Apr 30 18:53:05 testmono dhclient: Copyright 2004-2012 Internet Systems Consortium. Apr 30 18:53:05 testmono dhclient: All rights reserved. Apr 30 18:53:05 testmono dhclient: For info, please visit https://www.isc.org/software/dhcp/ Apr 30 18:53:05 testmono dhclient: Apr 30 18:53:05 testmono kernel: [ 7.925349] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Apr 30 18:53:05 testmono kernel: [ 7.934666] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Apr 30 18:53:05 testmono kernel: [ 7.934714] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 30 18:53:05 testmono dhclient: Listening on LPF/eth0/08:00:27:f0:b8:b7 Apr 30 18:53:05 testmono dhclient: Sending on LPF/eth0/08:00:27:f0:b8:b7 Apr 30 18:53:05 testmono dhclient: Sending on Socket/fallback Apr 30 18:53:05 testmono dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0x2550f470) Apr 30 18:53:05 testmono dhclient: DHCPREQUEST of 10.0.0.239 on eth0 to 255.255.255.255 port 67 (xid=0x2550f470) Apr 30 18:53:05 testmono dhclient: DHCPOFFER of 10.0.0.239 from 10.0.0.4 Apr 30 18:53:05 testmono dhclient: DHCPACK of 10.0.0.239 from 10.0.0.4 Apr 30 18:53:05 testmono dhclient: bound to 10.0.0.239 -- renewal in 20305 seconds. Apr 30 18:53:05 testmono kernel: [ 8.165278] type=1400 audit(1430412785.974:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 8.166180] type=1400 audit(1430412785.974:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser" Apr 30 18:53:05 testmono kernel: [ 8.173061] type=1400 audit(1430412785.982:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser" Apr 30 18:53:06 testmono kernel: [ 8.193423] init: failsafe main process (521) killed by TERM signal Apr 30 18:53:06 testmono kernel: [ 8.397546] type=1400 audit(1430412786.206:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=800 comm="apparmor_parser" Apr 30 18:53:07 testmono kernel: [ 9.379188] init: plymouth-upstart-bridge main process ended, respawning