[ 7.362980] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.462778] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 7.524329] init: plymouth-upstart-bridge main process ended, respawning [ 7.528241] init: plymouth-upstart-bridge main process (1248) terminated with status 1 [ 7.528259] init: plymouth-upstart-bridge main process ended, respawning [ 7.566560] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 7.566671] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.566876] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.766074] wlan0: authenticate with 00:04:0e:da:bd:ae [ 9.788299] wlan0: direct probe to 00:04:0e:da:bd:ae (try 1/3) [ 9.989704] wlan0: send auth to 00:04:0e:da:bd:ae (try 2/3) [ 9.991156] wlan0: authenticated [ 9.993674] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 9.997271] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 10.000811] wlan0: associated [ 10.000826] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.018637] wlan0: deauthenticating from 00:04:0e:da:bd:ae by local choice (reason=2) [ 10.039078] wlan0: authenticate with 00:04:0e:da:bd:ae [ 10.040636] wlan0: send auth to 00:04:0e:da:bd:ae (try 1/3) [ 10.040878] cfg80211: Calling CRDA to update world regulatory domain [ 10.042635] wlan0: authenticated [ 10.042861] cfg80211: World regulatory domain updated: [ 10.042863] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.042864] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.042865] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.042866] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.042867] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.042868] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.045658] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 10.049452] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 10.053207] wlan0: associated [ 35.724898] audit_printk_skb: 132 callbacks suppressed [ 35.724901] type=1400 audit(1423340021.510:62): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/.ecryptfs/nf/.config/libaccounts-glib/accounts.db" pid=2312 comm="mission-control" requested_mask="rw" denied_mask="rw" fsuid=1000 ouid=1000 [ 35.724955] type=1400 audit(1423340021.510:63): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/.ecryptfs/nf/.config/libaccounts-glib/accounts.db" pid=2312 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 35.725992] type=1400 audit(1423340021.510:64): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/.ecryptfs/nf/.config/dconf/user" pid=2312 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 36.010727] type=1400 audit(1423340021.794:65): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/.ecryptfs/nf/.local/share/telepathy/mission-control/accounts.cfg" pid=2312 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 55.188553] wlan0: deauthenticating from 00:04:0e:da:bd:ae by local choice (reason=3) [ 55.213014] cfg80211: Calling CRDA to update world regulatory domain [ 55.215118] cfg80211: World regulatory domain updated: [ 55.215121] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 55.215122] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 55.215123] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 55.215124] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 55.215125] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 55.215126] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.992185] wlan0: authenticate with 00:04:0e:da:bd:ae [ 57.993844] wlan0: send auth to 00:04:0e:da:bd:ae (try 1/3) [ 57.995199] wlan0: authenticated [ 57.996529] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 57.999794] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 58.003432] wlan0: associated [ 137.566910] usb 3-8: USB disconnect, device number 5 [ 137.676154] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [ 137.676168] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [ 137.676179] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2 [ 139.291560] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] [ 139.347811] cfg80211: Calling CRDA to update world regulatory domain [ 139.353347] cfg80211: World regulatory domain updated: [ 139.353350] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 139.353351] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 139.353352] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 139.353353] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 139.353354] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 139.353355] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 139.611468] usb 3-8: new high-speed USB device number 6 using xhci_hcd [ 139.646314] usb 3-8: New USB device found, idVendor=148f, idProduct=5372 [ 139.646317] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 139.646318] usb 3-8: Product: 802.11 n WLAN [ 139.646319] usb 3-8: Manufacturer: Ralink [ 139.815644] usb 3-8: reset high-speed USB device number 6 using xhci_hcd [ 139.841632] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a840 [ 139.841635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a800 [ 139.841637] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a880 [ 139.841638] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a8c0 [ 139.841639] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a900 [ 139.841641] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a940 [ 139.841642] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ca01a980 [ 139.842234] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 139.853000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5372 detected [ 139.853230] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 139.863532] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 139.863559] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 140.022681] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 140.022868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 140.073379] ieee80211 phy1: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [ 140.073449] ieee80211 phy1: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [ 142.210572] wlan0: authenticate with 00:04:0e:da:bd:ae [ 142.229077] wlan0: direct probe to 00:04:0e:da:bd:ae (try 1/3) [ 142.430401] wlan0: send auth to 00:04:0e:da:bd:ae (try 2/3) [ 142.432251] wlan0: authenticated [ 142.434382] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 142.444515] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 142.448248] wlan0: associated [ 142.448265] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 142.458311] wlan0: deauthenticating from 00:04:0e:da:bd:ae by local choice (reason=2) [ 142.475568] wlan0: authenticate with 00:04:0e:da:bd:ae [ 142.477095] wlan0: send auth to 00:04:0e:da:bd:ae (try 1/3) [ 142.477293] cfg80211: Calling CRDA to update world regulatory domain [ 142.478461] wlan0: authenticated [ 142.479175] cfg80211: World regulatory domain updated: [ 142.479177] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.479178] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.479180] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.479181] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 142.479181] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.479182] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.482335] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 142.487788] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 142.491495] wlan0: associated [ 166.013183] usb 3-8: USB disconnect, device number 6 [ 166.124660] ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0 [ 166.124663] ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0 [ 167.279854] cfg80211: Calling CRDA to update world regulatory domain [ 167.282020] cfg80211: World regulatory domain updated: [ 167.282022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 167.282023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 167.282024] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 167.282025] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 167.282026] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 167.282027] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 167.739196] ieee80211 phy1: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] [ 168.066962] usb 3-8: new high-speed USB device number 7 using xhci_hcd [ 168.101899] usb 3-8: New USB device found, idVendor=148f, idProduct=5372 [ 168.101902] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 168.101904] usb 3-8: Product: 802.11 n WLAN [ 168.101905] usb 3-8: Manufacturer: Ralink [ 168.270922] usb 3-8: reset high-speed USB device number 7 using xhci_hcd [ 168.296899] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16c40 [ 168.296902] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16c00 [ 168.296903] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16c80 [ 168.296904] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16cc0 [ 168.296905] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16d00 [ 168.296907] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16d40 [ 168.296908] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880190a16d80 [ 168.297356] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 168.307857] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5372 detected [ 168.308056] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 168.316165] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 168.316184] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 168.473940] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 168.474148] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 168.524695] ieee80211 phy2: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping [ 169.591231] wlan0: authenticate with 00:04:0e:da:bd:ae [ 169.604599] wlan0: direct probe to 00:04:0e:da:bd:ae (try 1/3) [ 169.805430] wlan0: send auth to 00:04:0e:da:bd:ae (try 2/3) [ 169.807263] wlan0: authenticated [ 169.813426] wlan0: associate with 00:04:0e:da:bd:ae (try 1/3) [ 169.821827] wlan0: RX AssocResp from 00:04:0e:da:bd:ae (capab=0x411 status=0 aid=2) [ 169.825491] wlan0: associated [ 169.825505] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 211.476723] usb 3-8: USB disconnect, device number 7 [ 213.088423] ieee80211 phy2: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] [ 213.093028] wlan0: deauthenticating from 00:04:0e:da:bd:ae by local choice (reason=3) [ 213.132976] cfg80211: Calling CRDA to update world regulatory domain [ 213.152312] cfg80211: World regulatory domain updated: [ 213.152315] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 213.152316] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 213.152317] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 213.152318] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 213.152319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 213.152320] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 218.695622] usb 3-8: new high-speed USB device number 8 using xhci_hcd [ 218.731776] usb 3-8: New USB device found, idVendor=148f, idProduct=5372 [ 218.731786] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 218.731791] usb 3-8: Product: 802.11 n WLAN [ 218.731795] usb 3-8: Manufacturer: Ralink [ 218.899789] usb 3-8: reset high-speed USB device number 8 using xhci_hcd [ 218.925771] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d840 [ 218.925781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d800 [ 218.925785] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d880 [ 218.925790] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d8c0 [ 218.925794] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d900 [ 218.925798] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d940 [ 218.925802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88019433d980 [ 218.926451] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 218.940347] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 5372 detected [ 218.940764] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' [ 218.956865] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 218.956892] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 219.122532] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 219.122747] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 326.944660] usb 3-7: new high-speed USB device number 9 using xhci_hcd [ 326.963677] usb 3-7: New USB device found, idVendor=0fce, idProduct=e12e [ 326.963687] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 326.963692] usb 3-7: Product: SEMC HSUSB Device [ 326.963696] usb 3-7: Manufacturer: SEMC [ 326.963699] usb 3-7: SerialNumber: CB511GNMDX [ 326.964832] usb-storage 3-7:1.0: USB Mass Storage device detected [ 326.965036] scsi7 : usb-storage 3-7:1.0 [ 327.965230] scsi 7:0:0:0: Direct-Access SEMC Mass Storage 0100 PQ: 0 ANSI: 2 [ 327.965755] sd 7:0:0:0: Attached scsi generic sg8 type 0 [ 327.967040] sd 7:0:0:0: [sdh] Attached SCSI removable disk [ 630.253904] usb 3-8: USB disconnect, device number 8 [ 631.867694] ieee80211 phy3: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] [ 659.487677] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 659.487723] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 748.316203] systemd-hostnamed[3136]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 850.105855] e1000e: eth0 NIC Link is Down [ 854.838696] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 867.311314] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 867.311380] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1707.924326] usb 3-1: new high-speed USB device number 10 using xhci_hcd [ 1707.960333] usb 3-1: New USB device found, idVendor=148f, idProduct=5372 [ 1707.960343] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1707.960348] usb 3-1: Product: 802.11 n WLAN [ 1707.960353] usb 3-1: Manufacturer: Ralink [ 1708.128676] usb 3-1: reset high-speed USB device number 10 using xhci_hcd [ 1708.154598] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22440 [ 1708.154608] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22400 [ 1708.154613] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22480 [ 1708.154617] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b224c0 [ 1708.154621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22500 [ 1708.154626] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22540 [ 1708.154630] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880194b22580 [ 1708.155367] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 1708.169359] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 5372 detected [ 1708.169771] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' [ 1708.187910] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 1708.187932] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 1708.355609] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1708.356045] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready