[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.17.1-031701-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201410150735 SMP Wed Oct 15 11:36:31 UTC 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.1-031701-generic root=UUID=8ceeee85-b9c7-41ec-8e1c-24eb1d5e089b ro quiet splash zswap.enabled=1 vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec2ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cec30000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 3435CTO/3435CTO, BIOS GCET99WW (2.59 ) 05/28/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask E00000000 write-back [ 0.000000] 8 base 400000000 mask FE0000000 write-back [ 0.000000] 9 base 41F000000 mask FFF000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xcec30 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff] [ 0.000000] [mem 0x41e400000-0x41e5fffff] page 2M [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff] [ 0.000000] [mem 0x41c000000-0x41e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE [ 0.000000] BRK [0x01fcd000, 0x01fcdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xcec2ffff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xcebfffff] page 2M [ 0.000000] [mem 0xcec00000-0xcec2ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x348b4000-0x36451fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFE7000 0110E1 (v01 LENOVO TP-GC 00002590 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-GC 00002590 PTL 00000001) [ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFDB000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 0x00000000DAFD9000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFD8000 0002A6 (v01 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: DBG2 0x00000000DAFD7000 0000E9 (v00 LENOVO TP-GC 00002590 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff] [ 0.000000] NODE_DATA [mem 0x41e5ec000-0x41e5f0fff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e000000-ffff88041dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xcec2ffff] [ 0.000000] node 0: [mem 0x100000000-0x41e5fffff] [ 0.000000] On node 0 totalpages: 4116427 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13161 pages used for memmap [ 0.000000] DMA32 zone: 842287 pages, LIFO batch:31 [ 0.000000] Normal zone: 51096 pages used for memmap [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcec30000-0xdae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041e200000 s86720 r8192 d23872 u262144 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4052085 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.1-031701-generic root=UUID=8ceeee85-b9c7-41ec-8e1c-24eb1d5e089b ro quiet splash zswap.enabled=1 vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16095796K/16465708K available (7846K kernel code, 1145K rwdata, 3772K rodata, 1376K init, 1308K bss, 369912K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 66060288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.294 MHz processor [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000037] ACPI: Core revision 20140724 [ 0.010178] ACPI: All ACPI Tables successfully acquired [ 0.011320] Security Framework initialized [ 0.011331] AppArmor: AppArmor initialized [ 0.011332] Yama: becoming mindful. [ 0.012190] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.015586] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.017105] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.017121] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.017322] Initializing cgroup subsys memory [ 0.017327] Initializing cgroup subsys devices [ 0.017328] Initializing cgroup subsys freezer [ 0.017330] Initializing cgroup subsys net_cls [ 0.017331] Initializing cgroup subsys blkio [ 0.017333] Initializing cgroup subsys perf_event [ 0.017335] Initializing cgroup subsys net_prio [ 0.017337] Initializing cgroup subsys hugetlb [ 0.017356] CPU: Physical Processor ID: 0 [ 0.017357] CPU: Processor Core ID: 0 [ 0.017361] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.017668] mce: CPU supports 7 MCE banks [ 0.017677] CPU0: Thermal monitoring enabled (TM1) [ 0.017684] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.017793] Freeing SMP alternatives memory: 28K (ffffffff81e78000 - ffffffff81e7f000) [ 0.018778] ftrace: allocating 32231 entries in 126 pages [ 0.031577] dmar: Host address width 36 [ 0.031580] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.031585] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.031586] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.031589] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.031589] dmar: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff [ 0.031591] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.031664] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.031665] HPET id 0 under DRHD base 0xfed91000 [ 0.031665] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.031785] Enabled IRQ remapping in x2apic mode [ 0.031786] Enabling x2apic [ 0.031787] Enabled x2apic [ 0.031795] Switched APIC routing to cluster x2apic. [ 0.032246] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071938] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09) [ 0.071949] TSC deadline timer enabled [ 0.071974] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.071991] ... version: 3 [ 0.071991] ... bit width: 48 [ 0.071992] ... generic registers: 4 [ 0.071993] ... value mask: 0000ffffffffffff [ 0.071994] ... max period: 0000ffffffffffff [ 0.071994] ... fixed-purpose events: 3 [ 0.071995] ... event mask: 000000070000000f [ 0.073353] x86: Booting SMP configuration: [ 0.073354] .... node #0, CPUs: #1 [ 0.086778] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.086854] #2 #3 [ 0.113630] x86: Booted up 1 node, 4 CPUs [ 0.113634] smpboot: Total of 4 processors activated (23146.35 BogoMIPS) [ 0.117131] devtmpfs: initialized [ 0.121530] evm: security.selinux [ 0.121531] evm: security.SMACK64 [ 0.121532] evm: security.SMACK64EXEC [ 0.121533] evm: security.SMACK64TRANSMUTE [ 0.121533] evm: security.SMACK64MMAP [ 0.121534] evm: security.ima [ 0.121535] evm: security.capability [ 0.121583] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.122299] pinctrl core: initialized pinctrl subsystem [ 0.122360] regulator-dummy: no parameters [ 0.122396] RTC time: 8:52:14, date: 11/01/14 [ 0.122463] NET: Registered protocol family 16 [ 0.122593] cpuidle: using governor ladder [ 0.122596] cpuidle: using governor menu [ 0.122641] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.122642] ACPI: bus type PCI registered [ 0.122644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.122830] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.122833] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.122895] PCI: Using configuration type 1 for base access [ 0.126010] ACPI: Added _OSI(Module Device) [ 0.126012] ACPI: Added _OSI(Processor Device) [ 0.126012] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.127225] ACPI : EC: EC description table is found, configuring boot EC [ 0.130607] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.143478] ACPI: Dynamic OEM Table Load: [ 0.143488] ACPI: SSDT 0xFFFF880407CB8000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.145853] ACPI: Dynamic OEM Table Load: [ 0.145860] ACPI: SSDT 0xFFFF880407C31000 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.149754] ACPI: Dynamic OEM Table Load: [ 0.149760] ACPI: SSDT 0xFFFF880407F70000 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.154142] ACPI: Interpreter enabled [ 0.154147] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.154150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.154160] ACPI: (supports S0 S3 S4 S5) [ 0.154161] ACPI: Using IOAPIC for interrupt routing [ 0.154179] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158068] ACPI: Power Resource [PUBS] (on) [ 0.158705] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.159472] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.161605] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.161942] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.162070] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162133] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11) [ 0.162195] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11) [ 0.162321] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.162380] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.162449] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.162452] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.162531] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.162566] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.162568] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.162570] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.162571] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.162692] PCI host bridge to bus 0000:00 [ 0.162694] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.162696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.162697] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.162699] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.162700] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] [ 0.162701] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.162708] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.162774] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.162783] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.162789] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.162793] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.162874] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.162895] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit] [ 0.162963] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.162987] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.163026] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.163048] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit] [ 0.163121] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.163179] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.163196] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7] [ 0.163205] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff] [ 0.163328] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.163345] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff] [ 0.163353] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff] [ 0.163362] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 0.163421] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.163445] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.163481] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.163501] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff] [ 0.163587] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.163613] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.163651] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.163667] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit] [ 0.163737] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.163767] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.163804] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.163940] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.164011] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.164146] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.164217] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.164352] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.164389] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.164433] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.164453] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff] [ 0.164538] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.164564] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.164600] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.164747] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.164764] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 0.164772] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf] [ 0.164779] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 0.164786] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb] [ 0.164794] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.164802] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff] [ 0.164845] pci 0000:00:1f.2: PME# supported from D3hot [ 0.164897] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.164911] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit] [ 0.164931] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.165165] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001 [ 0.165190] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.165216] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff] [ 0.165440] pci 0000:02:00.0: supports D1 D2 [ 0.165441] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173187] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.173191] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.173197] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff] [ 0.173205] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.173435] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.173603] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit] [ 0.174361] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.185149] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.185158] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff] [ 0.185263] acpiphp: Slot [1] registered [ 0.185272] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.185278] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.185282] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.185290] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.186242] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.186294] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.186377] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.186379] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.186381] vgaarb: loaded [ 0.186382] vgaarb: bridge control possible 0000:00:02.0 [ 0.186579] SCSI subsystem initialized [ 0.186617] libata version 3.00 loaded. [ 0.186636] ACPI: bus type USB registered [ 0.186649] usbcore: registered new interface driver usbfs [ 0.186655] usbcore: registered new interface driver hub [ 0.186672] usbcore: registered new device driver usb [ 0.186787] PCI: Using ACPI for IRQ routing [ 0.188471] PCI: pci_cache_line_size set to 64 bytes [ 0.188834] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.188835] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.188836] e820: reserve RAM buffer [mem 0xcec30000-0xcfffffff] [ 0.188837] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] [ 0.188926] NetLabel: Initializing [ 0.188927] NetLabel: domain hash size = 128 [ 0.188927] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.188937] NetLabel: unlabeled traffic allowed by default [ 0.188993] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.188997] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.192039] Switched to clocksource hpet [ 0.196461] AppArmor: AppArmor Filesystem Enabled [ 0.196490] pnp: PnP ACPI init [ 0.196815] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.196817] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.196819] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.196820] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.196822] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.196823] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.196824] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.196826] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.196827] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.196828] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.196830] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.196831] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.196833] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.196834] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.196836] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.196837] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.196839] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.196842] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.196909] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.196925] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.196927] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.196928] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.196930] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.196931] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.196933] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.196934] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved [ 0.196936] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.196937] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.196939] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.196940] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.196942] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.196944] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.196991] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.197018] pnp 00:03: Plug and Play ACPI device, IDs LEN0070 PNP0303 (active) [ 0.197041] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.197078] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.197614] pnp: PnP ACPI: found 6 devices [ 0.204082] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.204088] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.204094] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff] [ 0.204099] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.204107] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.204114] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff] [ 0.204125] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.204128] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.204135] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.204139] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.204148] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.204149] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.204151] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.204152] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] [ 0.204153] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.204155] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.204156] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff] [ 0.204157] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.204159] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff] [ 0.204160] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.204162] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff] [ 0.204163] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.204185] NET: Registered protocol family 2 [ 0.204353] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.204542] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.204646] TCP: Hash tables configured (established 131072 bind 65536) [ 0.204659] TCP: reno registered [ 0.204673] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.204716] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.204781] NET: Registered protocol family 1 [ 0.204795] pci 0000:00:02.0: Video device with shadowed ROM [ 0.205359] PCI: CLS 64 bytes, default 64 [ 0.205410] Trying to unpack rootfs image as initramfs... [ 0.573879] Freeing initrd memory: 28280K (ffff8800348b4000 - ffff880036452000) [ 0.573915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.573917] software IO TLB [mem 0xcac30000-0xcec30000] (64MB) mapped at [ffff8800cac30000-ffff8800cec2ffff] [ 0.574152] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.574186] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19 [ 0.574194] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19 [ 0.574203] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19 [ 0.574210] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19 [ 0.574263] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.574283] Scanning for low memory corruption every 60 seconds [ 0.574584] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.574604] Initialise system trusted keyring [ 0.574622] audit: initializing netlink subsys (disabled) [ 0.574633] audit: type=2000 audit(1414831933.568:1): initialized [ 0.574933] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.576131] zpool: loaded [ 0.576134] zbud: loaded [ 0.576291] VFS: Disk quotas dquot_6.5.2 [ 0.576319] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.576683] fuse init (API version 7.23) [ 0.576760] msgmni has been set to 31492 [ 0.576808] Key type big_key registered [ 0.577204] Key type asymmetric registered [ 0.577207] Asymmetric key parser 'x509' registered [ 0.577236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.577276] io scheduler noop registered [ 0.577280] io scheduler deadline registered (default) [ 0.577305] io scheduler cfq registered [ 0.577729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.577742] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.577782] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.577783] vesafb: scrolling: redraw [ 0.577784] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.577794] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 4160k, total 4160k [ 0.636388] Console: switching to colour frame buffer device 170x48 [ 0.694750] fb0: VESA VGA frame buffer device [ 0.694772] intel_idle: MWAIT substates: 0x21120 [ 0.694773] intel_idle: v0.4 model 0x3A [ 0.694774] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.695137] ACPI: AC Adapter [AC] (on-line) [ 0.695208] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.695403] ACPI: Lid Switch [LID] [ 0.695434] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.695437] ACPI: Sleep Button [SLPB] [ 0.695471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.695472] ACPI: Power Button [PWRF] [ 0.696567] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.696569] ACPI: Thermal Zone [THM0] (55 C) [ 0.696591] GHES: HEST is not enabled! [ 0.696700] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.704549] ACPI: Battery Slot [BAT0] (battery present) [ 0.718525] 0000:00:16.3: ttyS4 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A [ 0.718727] Linux agpgart interface v0.103 [ 0.719207] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 0.813421] brd: module loaded [ 0.813970] loop: module loaded [ 0.814139] libphy: Fixed MDIO Bus: probed [ 0.814141] tun: Universal TUN/TAP device driver, 1.6 [ 0.814142] tun: (C) 1999-2004 Max Krasnyansky [ 0.814222] PPP generic driver version 2.4.2 [ 0.814266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.814271] ehci-pci: EHCI PCI platform driver [ 0.814349] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.814354] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.814370] ehci-pci 0000:00:1a.0: debug port 2 [ 0.818259] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.818276] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000 [ 0.828235] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.828273] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.828274] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828276] usb usb1: Product: EHCI Host Controller [ 0.828277] usb usb1: Manufacturer: Linux 3.17.1-031701-generic ehci_hcd [ 0.828278] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.828384] hub 1-0:1.0: USB hub found [ 0.828390] hub 1-0:1.0: 3 ports detected [ 0.828563] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.828567] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.828578] ehci-pci 0000:00:1d.0: debug port 2 [ 0.832486] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.832500] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000 [ 0.844264] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.844308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.844310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844311] usb usb2: Product: EHCI Host Controller [ 0.844312] usb usb2: Manufacturer: Linux 3.17.1-031701-generic ehci_hcd [ 0.844313] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.844465] hub 2-0:1.0: USB hub found [ 0.844471] hub 2-0:1.0: 3 ports detected [ 0.844583] ehci-platform: EHCI generic platform driver [ 0.844591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.844596] ohci-pci: OHCI PCI platform driver [ 0.844603] ohci-platform: OHCI generic platform driver [ 0.844610] uhci_hcd: USB Universal Host Controller Interface driver [ 0.844687] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.844693] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.844789] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.844811] xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X [ 0.844866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.844867] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844868] usb usb3: Product: xHCI Host Controller [ 0.844870] usb usb3: Manufacturer: Linux 3.17.1-031701-generic xhci_hcd [ 0.844871] usb usb3: SerialNumber: 0000:00:14.0 [ 0.845024] hub 3-0:1.0: USB hub found [ 0.845037] hub 3-0:1.0: 4 ports detected [ 0.845339] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.845342] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.845374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.845375] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845376] usb usb4: Product: xHCI Host Controller [ 0.845378] usb usb4: Manufacturer: Linux 3.17.1-031701-generic xhci_hcd [ 0.845379] usb usb4: SerialNumber: 0000:00:14.0 [ 0.845531] hub 4-0:1.0: USB hub found [ 0.845544] hub 4-0:1.0: 4 ports detected [ 0.845931] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.849423] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.849427] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.849658] mousedev: PS/2 mouse device common for all mice [ 0.849989] rtc_cmos 00:02: RTC can wake from S4 [ 0.850148] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.850181] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.850248] device-mapper: uevent: version 1.0.3 [ 0.850314] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.850328] Intel P-state driver initializing. [ 0.850442] ledtrig-cpu: registered to indicate activity on CPUs [ 0.850523] TCP: cubic registered [ 0.850591] NET: Registered protocol family 10 [ 0.850791] NET: Registered protocol family 17 [ 0.850800] Key type dns_resolver registered [ 0.851038] Loading compiled-in X.509 certificates [ 0.851604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.851790] Loaded X.509 cert 'Magrathea: Glacier signing key: 7ed115fa498074c19aa239524038017ac0fd6dfa' [ 0.851802] registered taskstats version 1 [ 0.851812] zswap: loading zswap [ 0.851813] zpool: creating pool type zbud [ 0.851814] zpool: created zbud pool [ 0.851815] zswap: using zbud pool [ 0.851818] zswap: using lzo compressor [ 0.853400] Key type trusted registered [ 0.854620] Key type encrypted registered [ 0.855793] AppArmor: AppArmor sha1 policy hashing enabled [ 1.080433] evm: HMAC attrs: 0x1 [ 1.080968] Magic number: 6:291:876 [ 1.081079] rtc_cmos 00:02: setting system clock to 2014-11-01 08:52:14 UTC (1414831934) [ 1.081194] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.081196] EDD information not available. [ 1.081262] PM: Hibernation image not present or could not be loaded. [ 1.082070] Freeing unused kernel memory: 1376K (ffffffff81d20000 - ffffffff81e78000) [ 1.082072] Write protecting the kernel read-only data: 12288k [ 1.082688] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000) [ 1.083177] Freeing unused kernel memory: 324K (ffff880001baf000 - ffff880001c00000) [ 1.091360] systemd-udevd[126]: starting version 208 [ 1.091717] random: systemd-udevd urandom read with 7 bits of entropy available [ 1.102079] wmi: Mapper loaded [ 1.108746] [drm] Initialized drm 1.1.0 20060810 [ 1.108782] pps_core: LinuxPPS API ver. 1 registered [ 1.108784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.109683] sdhci: Secure Digital Host Controller Interface driver [ 1.109685] sdhci: Copyright(c) Pierre Ossman [ 1.110101] PTP clock support registered [ 1.111037] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) [ 1.111449] sdhci-pci 0000:02:00.0: No vmmc regulator found [ 1.111452] sdhci-pci 0000:02:00.0: No vqmmc regulator found [ 1.114769] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.114772] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.114915] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.114944] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 1.116481] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 1.140323] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.273074] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.273076] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.273582] hub 1-1:1.0: USB hub found [ 1.273808] hub 1-1:1.0: 6 ports detected [ 1.311033] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.311035] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:13:d7:28 [ 1.311036] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.311075] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 1.311096] ahci 0000:00:1f.2: version 3.0 [ 1.311207] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.311243] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.324380] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.324383] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.341100] scsi host0: ahci [ 1.341212] scsi host1: ahci [ 1.341300] scsi host2: ahci [ 1.341388] scsi host3: ahci [ 1.341471] scsi host4: ahci [ 1.341553] scsi host5: ahci [ 1.341585] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 28 [ 1.341588] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 28 [ 1.341589] ata3: DUMMY [ 1.341590] ata4: DUMMY [ 1.341592] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 28 [ 1.341593] ata6: DUMMY [ 1.341965] [drm] Memory usable by graphics device = 2048M [ 1.341967] [drm] Replacing VGA console driver [ 1.341969] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.341970] fb: switching to inteldrmfb from VESA VGA [ 1.341983] Console: switching to colour dummy device 80x25 [ 1.364385] i915 0000:00:02.0: irq 29 for MSI/MSI-X [ 1.364395] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.364396] [drm] Driver supports precise vblank timestamp query. [ 1.364463] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.440523] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.472539] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 1.565387] fbcon: inteldrmfb (fb0) is primary device [ 1.568529] usb 3-3: New USB device found, idVendor=0424, idProduct=2514 [ 1.568531] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.568756] hub 3-3:1.0: USB hub found [ 1.568783] hub 3-3:1.0: 4 ports detected [ 1.572421] tsc: Refined TSC clocksource calibration: 2893.428 MHz [ 1.660517] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.663735] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.663740] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.663892] ata1.00: supports DRM functions and may not be fully accessible [ 1.663941] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.663942] ata1.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max UDMA/133 [ 1.663943] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.665402] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.665407] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.665627] ata1.00: supports DRM functions and may not be fully accessible [ 1.665748] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.665752] ata1.00: configured for UDMA/133 [ 1.672741] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 [ 1.673044] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.673063] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.673130] sd 0:0:0:0: [sda] Write Protect is off [ 1.673132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.673159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.673774] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.674142] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.680464] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.813009] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.813012] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.813405] hub 2-1:1.0: USB hub found [ 1.813470] hub 2-1:1.0: 8 ports detected [ 1.839838] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 1.839840] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun [ 1.884855] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.982183] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 [ 1.982185] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.982185] usb 1-1.4: Product: BCM20702A0 [ 1.982186] usb 1-1.4: Manufacturer: Broadcom Corp [ 1.982187] usb 1-1.4: SerialNumber: E006E6B74E8D [ 1.992616] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.995009] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.995367] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.996953] ata2.00: ATAPI: HL-DT-ST DVDRAM GU70N, LT23, max UDMA/133 [ 1.999777] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.000201] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.001893] ata2.00: configured for UDMA/133 [ 2.009259] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU70N LT23 PQ: 0 ANSI: 5 [ 2.026939] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.026940] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.027157] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.027418] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.050497] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905 [ 2.050512] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.053009] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 2.097323] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.153545] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea [ 2.153546] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.153547] usb 1-1.6: Product: Integrated Camera [ 2.153548] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.240737] usb 3-3.3: new full-speed USB device number 3 using xhci_hcd [ 2.311922] Console: switching to colour frame buffer device 170x48 [ 2.313509] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.313510] i915 0000:00:02.0: registered panic notifier [ 2.324983] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.325102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.325294] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 2.331665] usb 3-3.3: New USB device found, idVendor=046d, idProduct=c52b [ 2.331674] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.331677] usb 3-3.3: Product: USB Receiver [ 2.331680] usb 3-3.3: Manufacturer: Logitech [ 2.335051] hidraw: raw HID events driver (C) Jiri Kosina [ 2.340417] usbcore: registered new interface driver usbhid [ 2.340419] usbhid: USB HID core driver [ 2.342908] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.3/input2 [ 2.344667] ata5: SATA link down (SStatus 0 SControl 300) [ 2.398596] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input8 [ 2.398703] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-3.3:1 [ 2.408682] usb 3-3.4: new low-speed USB device number 4 using xhci_hcd [ 2.532954] usb 3-3.4: New USB device found, idVendor=045e, idProduct=00dd [ 2.532958] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.532960] usb 3-3.4: Product: Comfort Curve Keyboard 2000 [ 2.532961] usb 3-3.4: Manufacturer: Microsoft [ 2.533078] usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.533082] usb 3-3.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.552144] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:045E:00DD.0005/input/input9 [ 2.552219] hid-generic 0003:045E:00DD.0005: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-3.4/input0 [ 2.553575] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/0003:045E:00DD.0006/input/input10 [ 2.553657] hid-generic 0003:045E:00DD.0006: input,hidraw3: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-3.4/input1 [ 2.572750] Switched to clocksource tsc [ 2.621057] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.716038] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6 [ 2.716041] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.716043] usb 2-1.5: Product: ISD-V4 [ 2.716044] usb 2-1.5: Manufacturer: Tablet [ 6.995098] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.236952] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 7.654392] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 7.800438] random: nonblocking pool is initialized [ 7.806918] init: plymouth-upstart-bridge main process (239) killed by TERM signal [ 7.867391] Adding 33552380k swap on /dev/sda6. Priority:-1 extents:1 across:33552380k SSFS [ 7.915452] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 9.052281] systemd-udevd[468]: starting version 208 [ 9.065475] FS-Cache: Loaded [ 9.087272] RPC: Registered named UNIX socket transport module. [ 9.087274] RPC: Registered udp transport module. [ 9.087275] RPC: Registered tcp transport module. [ 9.087275] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.089487] lp: driver loaded but no devices found [ 9.098762] ppdev: user-space parallel port driver [ 9.101728] FS-Cache: Netfs 'nfs' registered for caching [ 9.118076] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.151675] Bluetooth: Core ver 2.19 [ 9.151692] NET: Registered protocol family 31 [ 9.151693] Bluetooth: HCI device and connection manager initialized [ 9.151700] Bluetooth: HCI socket layer initialized [ 9.151702] Bluetooth: L2CAP socket layer initialized [ 9.151708] Bluetooth: SCO socket layer initialized [ 9.155462] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.155465] Bluetooth: BNEP filters: protocol multicast [ 9.155472] Bluetooth: BNEP socket layer initialized [ 9.160310] Bluetooth: RFCOMM TTY layer initialized [ 9.160318] Bluetooth: RFCOMM socket layer initialized [ 9.160322] Bluetooth: RFCOMM ver 1.11 [ 9.200465] mei_me 0000:00:16.0: irq 30 for MSI/MSI-X [ 9.231251] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.246468] media: Linux media interface: v0.10 [ 9.252519] Linux video capture interface: v2.00 [ 9.256067] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X [ 9.266830] init: avahi-cups-reload main process (619) terminated with status 1 [ 9.270330] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) [ 9.273682] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11 [ 9.273926] usbcore: registered new interface driver uvcvideo [ 9.273928] USB Video Class driver (1.1.1) [ 9.278370] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.LPC_.PMIO) (20140724/utaddress-258) [ 9.278376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.278380] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258) [ 9.278383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.278384] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258) [ 9.278387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.278388] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258) [ 9.278391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.278392] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.289034] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.289039] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.289041] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 9.289043] sound hdaudioC0D0: mono: mono_out=0x0 [ 9.289044] sound hdaudioC0D0: inputs: [ 9.289046] sound hdaudioC0D0: Mic=0x18 [ 9.289048] sound hdaudioC0D0: Dock Mic=0x19 [ 9.289050] sound hdaudioC0D0: Internal Mic=0x12 [ 9.300041] Non-volatile memory driver v1.3 [ 9.303840] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 9.303843] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.303844] thinkpad_acpi: ThinkPad BIOS GCET99WW (2.59 ), EC unknown [ 9.303845] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 3435CTO [ 9.307942] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net [ 9.308455] thinkpad_acpi: radio switch found; radios are enabled [ 9.308579] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 9.308672] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 9.308673] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 9.310357] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 9.310990] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 9.312335] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12 [ 9.342890] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.342998] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 9.343097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.343196] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 9.343290] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 9.343390] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 9.346544] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0007/input/input19 [ 9.346721] usbcore: registered new interface driver btusb [ 9.352531] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0a5c-21e6.hcd failed with error -2 [ 9.352535] bluetooth hci0: Falling back to user helper [ 9.354760] cfg80211: Calling CRDA to update world regulatory domain [ 9.374451] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.374454] Copyright(c) 2003- 2014 Intel Corporation [ 9.374627] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 9.374766] iwlwifi 0000:03:00.0: irq 32 for MSI/MSI-X [ 9.395614] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 9.402132] AVX version of gcm_enc/dec engaged. [ 9.443062] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 9.443066] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 9.443067] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 9.443070] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 9.448432] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 9.547566] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.598879] intel_rapl: Found RAPL domain package [ 9.598883] intel_rapl: Found RAPL domain core [ 9.598885] intel_rapl: Found RAPL domain uncore [ 9.643972] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found [ 9.658671] cfg80211: World regulatory domain updated: [ 9.658675] cfg80211: DFS Master region: unset [ 9.658676] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.658679] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.658681] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.658683] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.658684] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.658686] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.679162] audit: type=1400 audit(1414831943.091:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=681 comm="apparmor_parser" [ 9.679302] audit: type=1400 audit(1414831943.091:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser" [ 9.679411] audit: type=1400 audit(1414831943.091:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser" [ 9.693802] audit: type=1400 audit(1414831943.103:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=785 comm="apparmor_parser" [ 9.693808] audit: type=1400 audit(1414831943.103:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=785 comm="apparmor_parser" [ 9.693813] audit: type=1400 audit(1414831943.103:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=785 comm="apparmor_parser" [ 9.808920] audit: type=1400 audit(1414831943.219:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=733 comm="apparmor_parser" [ 9.809059] audit: type=1400 audit(1414831943.219:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser" [ 9.809156] audit: type=1400 audit(1414831943.219:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser" [ 9.820808] audit: type=1400 audit(1414831943.231:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=600 comm="apparmor_parser" [ 9.960281] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 10.010414] init: failsafe main process (817) killed by TERM signal [ 10.019483] init: samba-ad-dc main process (847) terminated with status 1 [ 10.265904] systemd-logind[975]: New seat seat0. [ 10.266516] systemd-logind[975]: Watching system buttons on /dev/input/event2 (Power Button) [ 10.266575] systemd-logind[975]: Watching system buttons on /dev/input/event5 (Video Bus) [ 10.266629] systemd-logind[975]: Watching system buttons on /dev/input/event0 (Lid Switch) [ 10.266682] systemd-logind[975]: Watching system buttons on /dev/input/event1 (Sleep Button) [ 10.266764] systemd-logind[975]: Watching system buttons on /dev/input/event11 (ThinkPad Extra Buttons) [ 10.473602] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 10.574883] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 10.575042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.576681] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.583886] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 10.851473] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.858284] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 10.936474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.033578] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.055245] Bridge firewalling registered [ 14.166402] init: kdm main process (1225) killed by TERM signal [ 14.171096] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 14.198468] wlan0: authenticate with 4c:8b:ef:df:60:a0 [ 14.201796] wlan0: send auth to 4c:8b:ef:df:60:a0 (try 1/3) [ 14.203604] wlan0: authenticated [ 14.208009] wlan0: associate with 4c:8b:ef:df:60:a0 (try 1/3) [ 14.211843] wlan0: RX AssocResp from 4c:8b:ef:df:60:a0 (capab=0x431 status=0 aid=3) [ 14.239287] wlan0: associated [ 14.239343] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 14.239403] cfg80211: Calling CRDA for country: GB [ 14.242166] cfg80211: Regulatory domain changed to country: GB [ 14.242170] cfg80211: DFS Master region: unset [ 14.242172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.242174] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.242176] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.242178] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 14.242179] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s) [ 14.242181] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 14.715699] CUSE: failed to register chrdev region [ 14.715797] CUSE: failed to register chrdev region [ 14.716006] CUSE: failed to register chrdev region [ 14.752723] systemd-logind[975]: Failed to start unit user@104.service: Unknown unit: user@104.service [ 14.752730] systemd-logind[975]: Failed to start user service: Unknown unit: user@104.service [ 14.756168] systemd-logind[975]: New session c1 of user lightdm. [ 14.756187] systemd-logind[975]: Linked /tmp/.X11-unix/X0 to /run/user/104/X11-display. [ 14.780050] Guest personality initialized and is inactive [ 14.780120] VMCI host device registered (name=vmci, major=10, minor=57) [ 14.780121] Initialized host personality [ 14.795127] NET: Registered protocol family 40 [ 19.353398] wacom 0003:056A:00E6.0007: usb_submit_urb(ctrl) failed: -1 [ 19.353422] wacom 0003:056A:00E6.0007: timeout initializing reports [ 19.353505] wacom 0003:056A:00E6.0007: hidraw4: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 [ 19.353771] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0008/input/input21 [ 29.159762] systemd-logind[975]: Failed to start unit user@1000.service: Unknown unit: user@1000.service [ 29.159767] systemd-logind[975]: Failed to start user service: Unknown unit: user@1000.service [ 29.162380] systemd-logind[975]: New session c2 of user magicmyth. [ 29.162396] systemd-logind[975]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. [ 32.252936] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 32.252947] Bluetooth: HIDP socket layer initialized [ 34.357421] wacom 0003:056A:00E6.0008: usb_submit_urb(ctrl) failed: -1 [ 34.357431] wacom 0003:056A:00E6.0008: timeout initializing reports [ 34.357511] wacom 0003:056A:00E6.0008: hidraw5: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 [ 215.451976] show_signal_msg: 123 callbacks suppressed [ 215.451981] chrome[6341]: segfault at 1f8 ip 00007f24bbbeb63f sp 00007fffd065c6c0 error 4 in i965_dri.so[7f24bb898000+51c000] [ 215.794822] chrome[6422]: segfault at 1f8 ip 00007fb5fa2c463f sp 00007fffcef2cff0 error 4 in i965_dri.so[7fb5f9f71000+51c000] [ 216.020252] chrome[6450]: segfault at 1f8 ip 00007fbd4867763f sp 00007fffc1d620e0 error 4 in i965_dri.so[7fbd48324000+51c000] [ 6215.803357] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [12338.760034] usb 3-3.1: new high-speed USB device number 5 using xhci_hcd [12338.848597] usb 3-3.1: New USB device found, idVendor=04e8, idProduct=6860 [12338.848613] usb 3-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [12338.848616] usb 3-3.1: Product: GT-I9300 [12338.848618] usb 3-3.1: Manufacturer: samsung [12338.848621] usb 3-3.1: SerialNumber: 4df11ca8142a4f77 [12364.688394] usb 3-3.1: usbfs: process 9538 (kio_mtp) did not claim interface 0 before use [12364.775047] usb 3-3.1: reset high-speed USB device number 5 using xhci_hcd [12364.775103] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4. [12364.775107] usb 3-3.1: hub failed to enable device, error -22 [12364.846884] usb 3-3.1: reset high-speed USB device number 5 using xhci_hcd [12364.846915] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4. [12364.846918] usb 3-3.1: hub failed to enable device, error -22 [12364.918905] usb 3-3.1: reset high-speed USB device number 5 using xhci_hcd [12364.935730] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880326a90200 [12364.935734] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880326a90290 [12364.935736] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880326a90248 [12364.935738] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880290e22840 [12364.935740] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880290e22888 [12364.936296] usb 3-3.1: usbfs: process 9538 (kio_mtp) did not claim interface 0 before use [12365.191695] usb 3-3.1: USB disconnect, device number 5 [12365.391003] usb 3-3.1: new high-speed USB device number 6 using xhci_hcd [12365.479562] usb 3-3.1: New USB device found, idVendor=04e8, idProduct=6860 [12365.479566] usb 3-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [12365.479568] usb 3-3.1: Product: GT-I9300 [12365.479570] usb 3-3.1: Manufacturer: samsung [12365.479572] usb 3-3.1: SerialNumber: 4df11ca8142a4f77 [13707.961264] systemd-hostnamed[11689]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [19687.157728] usb 3-3.1: USB disconnect, device number 6 [43946.741458] wlan0: deauthenticated from 4c:8b:ef:df:60:a0 (Reason: 3=DEAUTH_LEAVING) [43946.796310] cfg80211: Calling CRDA to update world regulatory domain [43946.812398] cfg80211: World regulatory domain updated: [43946.812403] cfg80211: DFS Master region: unset [43946.812404] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [43946.812406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [43946.812408] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [43946.812409] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [43946.812411] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [43946.812412] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [43950.132388] wlan0: authenticate with 4c:8b:ef:df:60:a0 [43950.135205] wlan0: send auth to 4c:8b:ef:df:60:a0 (try 1/3) [43950.152867] wlan0: authenticated [43950.157168] wlan0: associate with 4c:8b:ef:df:60:a0 (try 1/3) [43950.170056] wlan0: RX AssocResp from 4c:8b:ef:df:60:a0 (capab=0x431 status=0 aid=3) [43950.195528] wlan0: associated [43950.195632] cfg80211: Calling CRDA for country: GB [43950.214010] cfg80211: Regulatory domain changed to country: GB [43950.214014] cfg80211: DFS Master region: unset [43950.214015] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [43950.214018] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [43950.214019] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [43950.214022] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [43950.214023] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s) [43950.214025] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [44120.964416] e1000e: eth0 NIC Link is Down [44121.168314] wlan0: deauthenticating from 4c:8b:ef:df:60:a0 by local choice (Reason: 3=DEAUTH_LEAVING) [44121.194008] cfg80211: Calling CRDA to update world regulatory domain [44121.213027] cfg80211: World regulatory domain updated: [44121.213031] cfg80211: DFS Master region: unset [44121.213032] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [44121.213035] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [44121.213037] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [44121.213039] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [44121.213041] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [44121.213043] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [44121.601370] PM: Syncing filesystems ... done. [44121.613752] PM: Preparing system for mem sleep [44121.615538] Freezing user space processes ... (elapsed 0.002 seconds) done. [44121.617896] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [44121.619231] PM: Entering mem sleep [44121.619242] Suspending console(s) (use no_console_suspend to debug) [44121.772864] sd 0:0:0:0: [sda] Synchronizing SCSI cache [44121.774873] sd 0:0:0:0: [sda] Stopping disk [44121.991263] e1000e: EEE TX LPI TIMER: 00000011 [44122.046791] PM: suspend of devices complete after 427.310 msecs [44122.063196] PM: late suspend of devices complete after 16.397 msecs [44122.065944] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [44122.065983] e1000e 0000:00:19.0: System wakeup enabled by ACPI [44122.065985] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [44122.066067] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [44122.079399] PM: noirq suspend of devices complete after 16.197 msecs [44122.079608] ACPI: Preparing to enter system sleep state S3 [44122.081798] PM: Saving platform NVS memory [44122.081802] Disabling non-boot CPUs ... [44122.081841] intel_pstate CPU 1 exiting [44122.082975] kvm: disabling virtualization on CPU1 [44122.083194] smpboot: CPU 1 is now offline [44122.083617] intel_pstate CPU 2 exiting [44122.083736] Broke affinity for irq 32 [44122.084740] kvm: disabling virtualization on CPU2 [44122.187049] smpboot: CPU 2 is now offline [44122.187456] intel_pstate CPU 3 exiting [44122.187540] Broke affinity for irq 16 [44122.187542] Broke affinity for irq 23 [44122.188549] kvm: disabling virtualization on CPU3 [44122.291081] smpboot: CPU 3 is now offline [44122.292553] ACPI: Low-level resume complete [44122.292592] PM: Restoring platform NVS memory [44122.292931] Enabling non-boot CPUs ... [44122.292970] x86: Booting SMP configuration: [44122.292970] smpboot: Booting Node 0 Processor 1 APIC 0x1 [44122.304264] kvm: enabling virtualization on CPU1 [44122.384664] CPU1 is up [44122.384684] smpboot: Booting Node 0 Processor 2 APIC 0x2 [44122.395958] kvm: enabling virtualization on CPU2 [44122.476666] CPU2 is up [44122.476684] smpboot: Booting Node 0 Processor 3 APIC 0x3 [44122.487975] kvm: enabling virtualization on CPU3 [44122.568696] CPU3 is up [44122.571876] ACPI: Waking up from system sleep state S3 [44122.652760] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [44122.652779] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [44122.652844] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [44122.655120] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [44122.655425] PM: noirq resume of devices complete after 17.516 msecs [44122.655809] PM: early resume of devices complete after 0.349 msecs [44122.655883] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X [44122.655938] e1000e 0000:00:19.0: System wakeup disabled by ACPI [44122.656470] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X [44122.656598] rtc_cmos 00:02: System wakeup disabled by ACPI [44122.657145] sd 0:0:0:0: [sda] Starting disk [44122.772845] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X [44122.868846] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci [44122.868865] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [44122.872890] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [44122.872965] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. [44122.872967] usb 3-3: hub failed to enable device, error -22 [44122.984703] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [44122.984737] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [44122.984765] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [44122.984781] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. [44122.984782] usb 3-3: hub failed to enable device, error -22 [44122.986012] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [44122.986016] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [44122.986179] ata1.00: supports DRM functions and may not be fully accessible [44122.986231] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [44122.987658] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [44122.987661] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [44122.987791] ata1.00: supports DRM functions and may not be fully accessible [44122.987834] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [44122.987836] ata1.00: configured for UDMA/133 [44122.992701] ata5: SATA link down (SStatus 0 SControl 300) [44123.036856] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [44123.096783] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [44123.113067] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804032b30c0 [44123.143760] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44123.144564] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44123.153485] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44123.153880] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44123.155470] ata2.00: configured for UDMA/133 [44123.393135] usb 3-3.3: reset full-speed USB device number 3 using xhci_hcd [44123.393225] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. [44123.393239] usb 3-3.3: hub failed to enable device, error -22 [44123.464873] usb 3-3.3: reset full-speed USB device number 3 using xhci_hcd [44123.464952] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. [44123.464956] usb 3-3.3: hub failed to enable device, error -22 [44123.536892] usb 3-3.3: reset full-speed USB device number 3 using xhci_hcd [44123.554322] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040327d780 [44123.554325] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040327d7e0 [44123.554327] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040327d840 [44123.813130] usb 3-3.4: reset low-speed USB device number 4 using xhci_hcd [44123.813142] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. [44123.813143] usb 3-3.4: hub failed to enable device, error -22 [44124.073220] usb 3-3.4: reset low-speed USB device number 4 using xhci_hcd [44124.073229] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. [44124.073230] usb 3-3.4: hub failed to enable device, error -22 [44124.333137] usb 3-3.4: reset low-speed USB device number 4 using xhci_hcd [44124.358953] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407d2cc00 [44124.358956] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407d2cc60 [44124.358964] usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [44124.358980] usb 3-3.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [44190.040372] ata2: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen [44190.040374] ata2: irq_stat 0x00400040, connection status changed [44190.040375] ata2: SError: { HostInt PHYRdyChg 10B8B DevExch } [44190.040378] ata2: hard resetting link [44190.643341] thinkpad_acpi: EC reports that Thermal Table has changed [44190.747001] thinkpad_acpi: undocked from hotplug port replicator [44190.762919] ata2: SATA link down (SStatus 0 SControl 300) [44195.764186] ata2: hard resetting link [44196.084282] ata2: SATA link down (SStatus 0 SControl 300) [44196.084288] ata2: limiting SATA link speed to 1.5 Gbps [44200.528240] ata2: hard resetting link [44200.845460] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [44200.847540] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44200.847832] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44200.851817] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44200.852116] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44200.853692] ata2.00: configured for UDMA/133 [44200.877469] ata2: EH complete [44201.502013] thinkpad_acpi: EC reports that Thermal Table has changed [44202.995678] PM: resume of devices complete after 80318.415 msecs [44202.996064] ------------[ cut here ]------------ [44202.996069] WARNING: CPU: 2 PID: 7401 at /home/apw/COD/linux/drivers/base/firmware_class.c:1124 _request_firmware+0x1c4/0x1e0() [44202.996091] Modules linked in: dm_crypt hidp vmw_vsock_vmci_transport vsock vmw_vmci ctr ccm xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_tcpudp bridge stp llc iptable_filter ip_tables x_tables autofs4 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul arc4 crc32_pclmul ghash_clmulni_intel iwldvm mac80211 snd_seq_midi snd_seq_midi_event aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper snd_rawmidi cryptd iwlwifi cfg80211 snd_hda_codec_hdmi serio_raw wacom thinkpad_acpi nvram snd_hda_codec_realtek snd_hda_codec_generic lpc_ich btusb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hda_intel v4l2_common snd_hda_controller videodev snd_hda_codec media snd_hwdep joydev [44202.996105] snd_pcm shpchp mei_me mei snd_seq snd_seq_device snd_timer snd soundcore rfcomm bnep bluetooth mac_hid nfsd cuse auth_rpcgss nfs_acl parport_pc nfs ppdev binfmt_misc lockd lp sunrpc parport fscache hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci libahci e1000e i2c_algo_bit sdhci_pci drm_kms_helper ptp sdhci pps_core drm wmi video [44202.996107] CPU: 2 PID: 7401 Comm: kworker/u17:0 Not tainted 3.17.1-031701-generic #201410150735 [44202.996108] Hardware name: LENOVO 3435CTO/3435CTO, BIOS GCET99WW (2.59 ) 05/28/2014 [44202.996118] Workqueue: hci0 hci_power_on [bluetooth] [44202.996120] 0000000000000464 ffff8804041ebbb8 ffffffff81796c37 ffffffff81c52928 [44202.996121] 0000000000000000 ffff8804041ebbf8 ffffffff81074a3c 0000000000000000 [44202.996122] 00000000fffffff5 ffff8804041ebcd0 ffff8801143ebb28 0000000000003a98 [44202.996123] Call Trace: [44202.996127] [] dump_stack+0x46/0x58 [44202.996130] [] warn_slowpath_common+0x8c/0xc0 [44202.996132] [] warn_slowpath_null+0x1a/0x20 [44202.996134] [] _request_firmware+0x1c4/0x1e0 [44202.996136] [] request_firmware+0x3c/0x60 [44202.996139] [] btusb_setup_bcm_patchram+0x89/0x540 [btusb] [44202.996142] [] ? btusb_submit_bulk_urb+0x134/0x1c0 [btusb] [44202.996144] [] ? btusb_submit_bulk_urb+0x134/0x1c0 [btusb] [44202.996151] [] hci_dev_do_open+0xe4/0x430 [bluetooth] [44202.996158] [] hci_power_on+0x3e/0x1d0 [bluetooth] [44202.996161] [] process_one_work+0x14e/0x460 [44202.996163] [] worker_thread+0x11b/0x3f0 [44202.996165] [] ? create_worker+0x1e0/0x1e0 [44202.996167] [] kthread+0xc9/0xe0 [44202.996168] [] ? flush_kthread_worker+0x90/0x90 [44202.996171] [] ret_from_fork+0x7c/0xb0 [44202.996172] [] ? flush_kthread_worker+0x90/0x90 [44202.996173] ---[ end trace 6bf4d62f21d1e9bd ]--- [44202.996175] bluetooth hci0: firmware: brcm/BCM20702A0-0a5c-21e6.hcd will not be loaded [44202.996177] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found [44202.996219] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking [44202.996220] PM: Finishing wakeup. [44202.996307] Restarting tasks ... [44202.996307] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! [44202.996328] ACPI: \_SB_.GDCK: undocking [44202.997744] systemd-logind[975]: Failed to send delayed message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. [44203.010047] usb 3-3: USB disconnect, device number 2 [44203.010052] usb 3-3.3: USB disconnect, device number 3 [44203.010754] done. [44203.014646] ata2: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen [44203.014667] ata2: irq_stat 0x00400040, connection status changed [44203.014670] ata2: SError: { HostInt PHYRdyChg 10B8B DevExch } [44203.014674] ata2: hard resetting link [44203.018413] ACPI: \_SB_.GDCK: undocking [44203.087580] usb 3-3.4: USB disconnect, device number 4 [44203.738262] ata2: SATA link down (SStatus 0 SControl 310) [44205.118598] ata2: hard resetting link [44205.438698] ata2: SATA link down (SStatus 0 SControl 310) [44210.440022] ata2: hard resetting link [44210.768118] ata2: SATA link down (SStatus 0 SControl 310) [44210.768125] ata2.00: disabled [44210.772110] sr 1:0:0:0: rejecting I/O to offline device [44210.772152] sr 1:0:0:0: killing request [44210.772177] sr 1:0:0:0: rejecting I/O to offline device [44210.772242] sr 1:0:0:0: rejecting I/O to offline device [44210.792122] ata2: EH complete [44210.792147] ata2.00: detaching (SCSI 1:0:0:0) [44210.792599] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking [44210.792847] ACPI: \_SB_.GDCK: docking [44210.801237] systemd-udevd[7411]: Failed to apply ACL on /dev/sr0: No such file or directory [44210.809129] systemd-udevd[7660]: Failed to apply ACL on /dev/sr0: No such file or directory [44210.929424] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen [44210.929449] ata2: irq_stat 0x00400040, connection status changed [44210.929465] ata2: SError: { RecovComm PHYRdyChg CommWake DevExch } [44210.929484] ata2: hard resetting link [44211.297508] ACPI: \_SB_.GDCK: Unable to dock! [44211.297558] ACPI: \_SB_.PCI0.SAT1.PRT1: docking [44211.652384] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [44211.750208] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44211.751017] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44211.752625] ata2.00: ATAPI: HL-DT-ST DVDRAM GU70N, LT23, max UDMA/133 [44211.755600] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [44211.755855] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [44211.757503] ata2.00: configured for UDMA/133 [44211.780474] ata2: EH complete [44211.780967] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU70N LT23 PQ: 0 ANSI: 5 [44211.798234] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [44211.798467] sr 1:0:0:0: Attached scsi CD-ROM sr0 [44211.798610] sr 1:0:0:0: Attached scsi generic sg1 type 5 [44258.158742] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen [44258.158832] ata2: irq_stat 0x00400040, connection status changed [44258.158903] ata2: SError: { PHYRdyChg 10B8B DevExch } [44258.158971] ata2: hard resetting link [44258.765544] thinkpad_acpi: EC reports that Thermal Table has changed [44258.791073] init: anacron main process (7494) killed by TERM signal [44258.873157] thinkpad_acpi: undocked from hotplug port replicator [44258.873259] ACPI: \_SB_.GDCK: undocking [44258.880960] ata2: SATA link down (SStatus 0 SControl 300) [44258.882345] ata2: hard resetting link [44259.209088] ata2: SATA link down (SStatus 0 SControl 300) [44259.209101] ata2: limiting SATA link speed to 1.5 Gbps [44264.210408] ata2: hard resetting link [44264.538504] ata2: SATA link down (SStatus 0 SControl 310) [44264.538522] ata2.00: disabled [44264.542511] sr 1:0:0:0: rejecting I/O to offline device [44264.542572] sr 1:0:0:0: killing request [44264.542643] sr 1:0:0:0: rejecting I/O to offline device [44264.562564] ata2: EH complete [44264.562593] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking [44264.562601] ata2.00: detaching (SCSI 1:0:0:0) [44264.568277] systemd-udevd[7681]: Failed to apply ACL on /dev/sr0: No such file or directory [44276.670657] init: tty1 main process (3122) killed by INT signal [44276.670680] init: tty1 main process ended, respawning [44285.515725] systemd-logind[975]: New session c3 of user magicmyth.