[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000097eeffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097ef0000-0x0000000097ef2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000097ef3000-0x0000000097efffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gateway T6412/MS-7184, BIOS 6.00 PG 08/19/2005 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x97ef0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-CFFFF uncachable [ 0.000000] D0000-D3FFF write-back [ 0.000000] D4000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFF0000000 write-back [ 0.000000] 2 base 0090000000 mask FFF8000000 write-back [ 0.000000] 3 base 0097F00000 mask FFFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 256MB, type WB [ 0.000000] reg 2, base: 2304MB, range: 128MB, type WB [ 0.000000] reg 3, base: 2431MB, range: 1MB, type UC [ 0.000000] total RAM covered: 2431M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 256MB, type WB [ 0.000000] reg 2, base: 2304MB, range: 128MB, type WB [ 0.000000] reg 3, base: 2431MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000f3ff0-0x000f3fff] mapped at [ffff8800000f3ff0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x97c00000-0x97dfffff] [ 0.000000] [mem 0x97c00000-0x97dfffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x94000000-0x97bfffff] [ 0.000000] [mem 0x94000000-0x97bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x80000000-0x93ffffff] [ 0.000000] [mem 0x80000000-0x93ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x97e00000-0x97eeffff] [ 0.000000] [mem 0x97e00000-0x97eeffff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3482c000-0x3640dfff] [ 0.000000] ACPI: RSDP 00000000000f7f10 000014 (v00 RS480 ) [ 0.000000] ACPI: RSDT 0000000097ef3040 000030 (v01 RS480 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000097ef30c0 000084 (v02 RS480 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000097ef31c0 003A20 (v01 RS480 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0000000097ef0000 000040 [ 0.000000] ACPI: MCFG 0000000097ef6d00 00003C (v01 RS480 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000097ef6c40 000068 (v01 RS480 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000097eeffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x97eeffff] [ 0.000000] NODE_DATA [mem 0x97eeb000-0x97eeffff] [ 0.000000] [ffffea0000000000-ffffea00025fffff] PMD -> [ffff880094e00000-ffff8800973fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x97eeffff] [ 0.000000] On node 0 totalpages: 622222 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9660 pages used for memmap [ 0.000000] DMA32 zone: 618224 pages, LIFO batch:31 [ 0.000000] SB4X0 revision 0x11 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x97f00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880097a00000 s86400 r8192 d24192 u1048576 [ 0.000000] pcpu-alloc: s86400 r8192 d24192 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 612477 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 118000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2404556K/2488888K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 84332K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 9961472 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2188.678 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.35 BogoMIPS (lpj=8754712) [ 0.008011] pid_max: default: 32768 minimum: 301 [ 0.008065] Security Framework initialized [ 0.008101] AppArmor: AppArmor initialized [ 0.008103] Yama: becoming mindful. [ 0.008638] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015411] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.017708] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.017724] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.018242] Initializing cgroup subsys memory [ 0.018258] Initializing cgroup subsys devices [ 0.018262] Initializing cgroup subsys freezer [ 0.018265] Initializing cgroup subsys blkio [ 0.018267] Initializing cgroup subsys perf_event [ 0.018271] Initializing cgroup subsys hugetlb [ 0.018301] tseg: 0097f00000 [ 0.018306] mce: CPU supports 5 MCE banks [ 0.018318] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.018318] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.018318] tlb_flushall_shift: 4 [ 0.032329] ACPI: Core revision 20131115 [ 0.033946] ACPI: All ACPI Tables successfully acquired [ 0.036050] ftrace: allocating 28541 entries in 112 pages [ 0.048623] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.090233] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3500+ (fam: 0f, model: 2f, stepping: 02) [ 0.092000] Performance Events: AMD PMU driver. [ 0.092000] ... version: 0 [ 0.092000] ... bit width: 48 [ 0.092000] ... generic registers: 4 [ 0.092000] ... value mask: 0000ffffffffffff [ 0.092000] ... max period: 00007fffffffffff [ 0.092000] ... fixed-purpose events: 0 [ 0.092000] ... event mask: 000000000000000f [ 0.092000] x86: Booted up 1 node, 1 CPUs [ 0.092000] smpboot: Total of 1 processors activated (4377.35 BogoMIPS) [ 0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092000] devtmpfs: initialized [ 0.095969] EVM: security.selinux [ 0.095971] EVM: security.SMACK64 [ 0.095973] EVM: security.ima [ 0.095974] EVM: security.capability [ 0.096067] PM: Registering ACPI NVS region [mem 0x97ef0000-0x97ef2fff] (12288 bytes) [ 0.097541] pinctrl core: initialized pinctrl subsystem [ 0.097650] regulator-dummy: no parameters [ 0.097691] RTC time: 1:40:47, date: 10/27/14 [ 0.097752] NET: Registered protocol family 16 [ 0.097945] cpuidle: using governor ladder [ 0.097948] cpuidle: using governor menu [ 0.097953] node 0 link 0: io port [d000, ffff] [ 0.097957] TOM: 00000000a0000000 aka 2560M [ 0.097959] node 0 link 0: mmio [a0000, bffff] [ 0.097963] node 0 link 0: mmio [a0000000, dfffffff] [ 0.097966] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.097969] node 0 link 0: mmio [e0000000, e02fffff] [ 0.097973] bus: [bus 00-02] on node 0 link 0 [ 0.097975] bus: 00 [io 0x0000-0xffff] [ 0.097977] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.097979] bus: 00 [mem 0xa0000000-0xefffffff] [ 0.097980] bus: 00 [mem 0xf0000000-0xfcffffffff] [ 0.098033] ACPI: bus type PCI registered [ 0.098036] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.098120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.098123] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.107613] PCI: Using configuration type 1 for base access [ 0.109000] bio: create slab at 0 [ 0.109231] ACPI: Added _OSI(Module Device) [ 0.109233] ACPI: Added _OSI(Processor Device) [ 0.109235] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.109236] ACPI: Added _OSI(Processor Aggregator Device) [ 0.112187] ACPI: Interpreter enabled [ 0.112195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.112200] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.112215] ACPI: (supports S0 S3 S4 S5) [ 0.112217] ACPI: Using IOAPIC for interrupt routing [ 0.112278] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.112384] ACPI: No dock devices found. [ 0.116786] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.116797] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.116803] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.116896] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.116899] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.116902] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.116905] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.116907] acpi PNP0A03:00: host bridge window [mem 0xa0000000-0xfebfffff] (ignored) [ 0.116910] PCI: root bus 00: hardware-probed resources [ 0.117069] PCI host bridge to bus 0000:00 [ 0.117073] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.117075] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.117078] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.117081] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff] [ 0.117084] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfcffffffff] [ 0.117092] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000 [ 0.117105] pci 0000:00:00.0: reg 0x18: [io 0x4100-0x411f] [ 0.117111] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.117190] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400 [ 0.117315] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f [ 0.117341] pci 0000:00:11.0: reg 0x10: [io 0xfe00-0xfe07] [ 0.117354] pci 0000:00:11.0: reg 0x14: [io 0xfd00-0xfd03] [ 0.117368] pci 0000:00:11.0: reg 0x18: [io 0xfc00-0xfc07] [ 0.117381] pci 0000:00:11.0: reg 0x1c: [io 0xfb00-0xfb03] [ 0.117394] pci 0000:00:11.0: reg 0x20: [io 0xfa00-0xfa0f] [ 0.117407] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f1ff] [ 0.117421] pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.117475] pci 0000:00:11.0: supports D1 D2 [ 0.117559] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f [ 0.117585] pci 0000:00:12.0: reg 0x10: [io 0xf900-0xf907] [ 0.117598] pci 0000:00:12.0: reg 0x14: [io 0xf800-0xf803] [ 0.117611] pci 0000:00:12.0: reg 0x18: [io 0xf700-0xf707] [ 0.117623] pci 0000:00:12.0: reg 0x1c: [io 0xf600-0xf603] [ 0.117636] pci 0000:00:12.0: reg 0x20: [io 0xf500-0xf50f] [ 0.117650] pci 0000:00:12.0: reg 0x24: [mem 0xfe02e000-0xfe02e1ff] [ 0.117663] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.117715] pci 0000:00:12.0: supports D1 D2 [ 0.117795] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310 [ 0.117818] pci 0000:00:13.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.117960] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.118011] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310 [ 0.118035] pci 0000:00:13.1: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 0.118173] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.118228] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320 [ 0.118254] pci 0000:00:13.2: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.118368] pci 0000:00:13.2: supports D1 D2 [ 0.118371] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.118417] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.118477] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500 [ 0.118499] pci 0000:00:14.0: reg 0x10: [io 0x0400-0x040f] [ 0.118512] pci 0000:00:14.0: reg 0x14: [mem 0xfe02a000-0xfe02a3ff] [ 0.118570] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.118684] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a [ 0.118707] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.118722] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.118735] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.118748] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.118762] pci 0000:00:14.1: reg 0x20: [io 0xf300-0xf30f] [ 0.118897] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100 [ 0.119054] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401 [ 0.119140] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.119199] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100 [ 0.119223] pci 0000:00:14.5: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.119360] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.119407] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.119484] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.119557] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.119628] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.119751] pci 0000:01:05.0: [1002:5954] type 00 class 0x030000 [ 0.119759] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.119765] pci 0000:01:05.0: reg 0x14: [io 0xef00-0xefff] [ 0.119771] pci 0000:01:05.0: reg 0x18: [mem 0xfddf0000-0xfddfffff] [ 0.119784] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.119797] pci 0000:01:05.0: supports D1 D2 [ 0.119841] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.119846] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.119849] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.119854] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.119911] pci 0000:02:01.0: [14f1:2f20] type 00 class 0x078000 [ 0.119940] pci 0000:02:01.0: reg 0x10: [mem 0xfdce0000-0xfdceffff] [ 0.119955] pci 0000:02:01.0: reg 0x14: [io 0xdf00-0xdf07] [ 0.120073] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.120148] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000 [ 0.120176] pci 0000:02:03.0: reg 0x10: [io 0xde00-0xdeff] [ 0.120193] pci 0000:02:03.0: reg 0x14: [mem 0xfdcff000-0xfdcff0ff] [ 0.120261] pci 0000:02:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.120307] pci 0000:02:03.0: supports D1 D2 [ 0.120310] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.120378] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010 [ 0.120407] pci 0000:02:04.0: reg 0x10: [mem 0xfdcfe000-0xfdcfe7ff] [ 0.120423] pci 0000:02:04.0: reg 0x14: [io 0xdd00-0xdd7f] [ 0.120541] pci 0000:02:04.0: supports D2 [ 0.120544] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold [ 0.120647] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.120657] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.120663] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.120669] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.120671] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.120674] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.120677] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xefffffff] (subtractive decode) [ 0.120679] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfcffffffff] (subtractive decode) [ 0.120783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.120845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.120906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.120966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.121026] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) [ 0.121085] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11) [ 0.121144] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11) [ 0.121203] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11) [ 0.121719] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.121726] ACPI: \_SB_.PCI0: notify handler is installed [ 0.121755] Found 1 acpi root devices [ 0.121926] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.121928] vgaarb: loaded [ 0.121930] vgaarb: bridge control possible 0000:01:05.0 [ 0.122232] SCSI subsystem initialized [ 0.122322] libata version 3.00 loaded. [ 0.122348] ACPI: bus type USB registered [ 0.122381] usbcore: registered new interface driver usbfs [ 0.122392] usbcore: registered new interface driver hub [ 0.122421] usbcore: registered new device driver usb [ 0.122551] PCI: Using ACPI for IRQ routing [ 0.134158] PCI: pci_cache_line_size set to 64 bytes [ 0.134169] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.134237] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.134240] e820: reserve RAM buffer [mem 0x97ef0000-0x97ffffff] [ 0.134375] NetLabel: Initializing [ 0.134377] NetLabel: domain hash size = 128 [ 0.134379] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.134398] NetLabel: unlabeled traffic allowed by default [ 0.134535] Switched to clocksource refined-jiffies [ 0.144328] AppArmor: AppArmor Filesystem Enabled [ 0.144390] pnp: PnP ACPI init [ 0.144413] ACPI: bus type PNP registered [ 0.144735] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.144745] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:11.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.144752] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.144762] pnp 00:00: disabling [io 0x040b] because it overlaps 0000:00:14.0 BAR 0 [io 0x0400-0x040f] [ 0.144784] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.144793] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:03.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.144835] system 00:00: [io 0x0228-0x022f] has been reserved [ 0.144838] system 00:00: [io 0x04d6] has been reserved [ 0.144841] system 00:00: [io 0x0c00-0x0c01] has been reserved [ 0.144844] system 00:00: [io 0x0c14] has been reserved [ 0.144847] system 00:00: [io 0x0c50-0x0c52] has been reserved [ 0.144850] system 00:00: [io 0x0c6c-0x0c6d] has been reserved [ 0.144853] system 00:00: [io 0x0c6f] has been reserved [ 0.144856] system 00:00: [io 0x0cd4-0x0cdf] has been reserved [ 0.144859] system 00:00: [io 0x4000-0x40fe] could not be reserved [ 0.144862] system 00:00: [io 0x4210-0x4217] has been reserved [ 0.144867] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.144873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.144999] pnp 00:01: [dma 4] [ 0.145035] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.145086] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.145113] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.145150] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.145242] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.145245] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.145249] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145331] pnp 00:06: [dma 2] [ 0.145370] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.145736] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.145859] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.145863] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.146040] pnp 00:09: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146044] pnp 00:09: disabling [mem 0x000d5000-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146048] pnp 00:09: disabling [mem 0x000f0000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146051] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146055] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146059] pnp 00:09: disabling [mem 0x00100000-0x97eeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.146100] system 00:09: [mem 0x97f00000-0x97ffffff] could not be reserved [ 0.146103] system 00:09: [mem 0x97ef0000-0x97efffff] could not be reserved [ 0.146107] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.146110] system 00:09: [mem 0x98000000-0x9fffffff] has been reserved [ 0.146113] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.146116] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.146120] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.146123] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.146131] pnp: PnP ACPI: found 10 devices [ 0.146133] ACPI: bus type PNP unregistered [ 0.152483] Switched to clocksource acpi_pm [ 0.152526] pci 0000:00:11.0: BAR 6: assigned [mem 0xa0000000-0xa007ffff pref] [ 0.152532] pci 0000:00:12.0: BAR 6: assigned [mem 0xa0080000-0xa00fffff pref] [ 0.152537] pci 0000:01:05.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] [ 0.152541] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.152544] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.152548] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.152552] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.152558] pci 0000:02:03.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.152562] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.152566] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.152573] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.152578] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.152588] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.152591] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.152594] pci_bus 0000:00: resource 6 [mem 0xa0000000-0xefffffff] [ 0.152596] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfcffffffff] [ 0.152600] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.152602] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.152605] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.152609] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.152612] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.152615] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.152618] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.152620] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff] [ 0.152623] pci_bus 0000:02: resource 6 [mem 0xa0000000-0xefffffff] [ 0.152626] pci_bus 0000:02: resource 7 [mem 0xf0000000-0xfcffffffff] [ 0.152694] NET: Registered protocol family 2 [ 0.153036] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.153321] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.153794] TCP: Hash tables configured (established 32768 bind 32768) [ 0.153964] TCP: reno registered [ 0.153976] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.154072] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.154278] NET: Registered protocol family 1 [ 0.154297] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.154306] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.312252] pci 0000:01:05.0: Boot video device [ 0.312266] PCI: CLS 32 bytes, default 64 [ 0.312370] Trying to unpack rootfs image as initramfs... [ 0.997984] Freeing initrd memory: 28552K (ffff88003482c000 - ffff88003640e000) [ 0.998460] microcode: AMD CPU family 0xf not supported [ 0.998463] Scanning for low memory corruption every 60 seconds [ 0.998790] Initialise system trusted keyring [ 0.998857] audit: initializing netlink socket (disabled) [ 0.998873] type=2000 audit(1414374047.995:1): initialized [ 1.031087] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.032830] zbud: loaded [ 1.033004] VFS: Disk quotas dquot_6.5.2 [ 1.033069] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.033736] fuse init (API version 7.22) [ 1.033832] msgmni has been set to 4752 [ 1.033917] Key type big_key registered [ 1.034277] Key type asymmetric registered [ 1.034279] Asymmetric key parser 'x509' registered [ 1.034331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.034366] io scheduler noop registered [ 1.034368] io scheduler deadline registered (default) [ 1.034405] io scheduler cfq registered [ 1.034542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.034562] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.034618] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.034620] vesafb: scrolling: redraw [ 1.034623] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.034777] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k [ 1.112236] Console: switching to colour frame buffer device 128x48 [ 1.189523] fb0: VESA VGA frame buffer device [ 1.189571] ipmi message handler version 39.2 [ 1.189655] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.189662] ACPI: Power Button [PWRB] [ 1.189715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.189718] ACPI: Power Button [PWRF] [ 1.189872] GHES: HEST is not enabled! [ 1.189970] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.191495] Linux agpgart interface v0.103 [ 1.193209] brd: module loaded [ 1.194113] loop: module loaded [ 1.194724] libphy: Fixed MDIO Bus: probed [ 1.194857] tun: Universal TUN/TAP device driver, 1.6 [ 1.194859] tun: (C) 1999-2004 Max Krasnyansky [ 1.194915] PPP generic driver version 2.4.2 [ 1.194964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.194969] ehci-pci: EHCI PCI platform driver [ 1.195146] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.195155] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 1.195250] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe02b000 [ 1.204021] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.204125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.204128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.204132] usb usb1: Product: EHCI Host Controller [ 1.204134] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd [ 1.204136] usb usb1: SerialNumber: 0000:00:13.2 [ 1.204272] hub 1-0:1.0: USB hub found [ 1.204285] hub 1-0:1.0: 8 ports detected [ 1.204522] ehci-platform: EHCI generic platform driver [ 1.204537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.204538] ohci-pci: OHCI PCI platform driver [ 1.204653] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.204660] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.204681] ohci-pci 0000:00:13.0: irq 19, io mem 0xfe02d000 [ 1.264044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.264047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.264049] usb usb2: Product: OHCI PCI host controller [ 1.264051] usb usb2: Manufacturer: Linux 3.13.0-37-generic ohci_hcd [ 1.264053] usb usb2: SerialNumber: 0000:00:13.0 [ 1.264181] hub 2-0:1.0: USB hub found [ 1.264193] hub 2-0:1.0: 4 ports detected [ 1.264413] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.264419] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.264441] ohci-pci 0000:00:13.1: irq 19, io mem 0xfe02c000 [ 1.324039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.324042] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.324044] usb usb3: Product: OHCI PCI host controller [ 1.324047] usb usb3: Manufacturer: Linux 3.13.0-37-generic ohci_hcd [ 1.324049] usb usb3: SerialNumber: 0000:00:13.1 [ 1.324166] hub 3-0:1.0: USB hub found [ 1.324178] hub 3-0:1.0: 4 ports detected [ 1.324324] ohci-platform: OHCI generic platform driver [ 1.324337] uhci_hcd: USB Universal Host Controller Interface driver [ 1.324420] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.327744] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.327752] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.327884] mousedev: PS/2 mouse device common for all mice [ 1.328056] rtc_cmos 00:02: RTC can wake from S4 [ 1.328208] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.328238] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 1.328344] device-mapper: uevent: version 1.0.3 [ 1.328429] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.328438] ledtrig-cpu: registered to indicate activity on CPUs [ 1.328577] TCP: cubic registered [ 1.328706] NET: Registered protocol family 10 [ 1.328964] NET: Registered protocol family 17 [ 1.328978] Key type dns_resolver registered [ 1.329215] Loading compiled-in X.509 certificates [ 1.330470] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9' [ 1.330489] registered taskstats version 1 [ 1.333633] Key type trusted registered [ 1.336388] Key type encrypted registered [ 1.339091] AppArmor: AppArmor sha1 policy hashing enabled [ 1.339099] IMA: No TPM chip found, activating TPM-bypass! [ 1.339390] regulator-dummy: disabling [ 1.339445] Magic number: 2:290:661 [ 1.339468] block ram14: hash matches [ 1.339584] rtc_cmos 00:02: setting system clock to 2014-10-27 01:40:48 UTC (1414374048) [ 1.351963] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 1.351965] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup [ 1.352048] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.352049] EDD information not available. [ 1.352091] PM: Hibernation image not present or could not be loaded. [ 1.354787] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.354793] Write protecting the kernel read-only data: 12288k [ 1.358494] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000) [ 1.361731] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) [ 1.388333] systemd-udevd[94]: starting version 204 [ 1.419112] sata_sil 0000:00:11.0: version 2.4 [ 1.424304] scsi0 : sata_sil [ 1.427878] scsi1 : sata_sil [ 1.427967] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23 [ 1.427972] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23 [ 1.430663] scsi2 : sata_sil [ 1.431382] Floppy drive(s): fd0 is 1.44M [ 1.432116] scsi3 : sata_sil [ 1.432190] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22 [ 1.432194] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22 [ 1.448074] FDC 0 is a post-1991 82077 [ 1.467684] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.467717] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.471453] scsi4 : pata_atiixp [ 1.473282] [drm] Initialized drm 1.1.0 20060810 [ 1.476084] scsi5 : pata_atiixp [ 1.476167] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf300 irq 14 [ 1.476170] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf308 irq 15 [ 1.477348] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.478645] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x000000000001de00, 00:13:d3:64:34:b2, IRQ 20 [ 1.556087] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.588662] [drm] radeon kernel modesetting enabled. [ 1.588757] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 1.588759] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 1.588788] Console: switching to colour dummy device 80x25 [ 1.589575] [drm] initializing kernel modesetting (RS480 0x1002:0x5954 0x1462:0x7141). [ 1.589594] [drm] register mmio base: 0xFDDF0000 [ 1.589596] [drm] register mmio size: 65536 [ 1.589886] [drm] Generation 2 PCI interface, using max accessible memory [ 1.589892] radeon 0000:01:05.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (128M used) [ 1.589895] radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF [ 1.589903] [drm] Detected VRAM RAM=128M, BAR=256M [ 1.589905] [drm] RAM width 128bits DDR [ 1.589988] [TTM] Zone kernel: Available graphics memory: 1217970 kiB [ 1.589990] [TTM] Initializing pool allocator [ 1.589995] [TTM] Initializing DMA pool allocator [ 1.590024] [drm] radeon: 128M of VRAM memory ready [ 1.590026] [drm] radeon: 512M of GTT memory ready. [ 1.590046] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.594805] [drm] radeon: 4 quad pipes, 1 z pipes initialized. [ 1.599699] [drm] PCIE GART of 512M enabled (table at 0x0000000036780000). [ 1.599766] radeon 0000:01:05.0: WB enabled [ 1.599771] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000060000000 and cpu addr 0xffff88003675d000 [ 1.599773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.599775] [drm] Driver supports precise vblank timestamp query. [ 1.599804] [drm] radeon: irq initialized. [ 1.599817] [drm] Loading R300 Microcode [ 1.599993] [drm] radeon: ring at 0x0000000060001000 [ 1.600031] [drm] ring test succeeded in 3 usecs [ 1.600168] [drm] ib test succeeded in 0 usecs [ 1.600592] [drm] Radeon Display Connectors [ 1.600594] [drm] Connector 0: [ 1.600595] [drm] VGA-1 [ 1.600598] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 1.600599] [drm] Encoders: [ 1.600601] [drm] CRT1: INTERNAL_DAC2 [ 1.649285] [drm] fb mappable at 0xD0040000 [ 1.649288] [drm] vram apper at 0xD0000000 [ 1.649289] [drm] size 4227072 [ 1.649291] [drm] fb depth is 24 [ 1.649292] [drm] pitch is 5504 [ 1.649403] fbcon: radeondrmfb (fb0) is primary device [ 1.700084] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, DG01, max UDMA/66 [ 1.700253] Console: switching to colour frame buffer device 170x48 [ 1.707726] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 1.707729] radeon 0000:01:05.0: registered panic notifier [ 1.707739] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0 [ 1.716526] ata5.00: configured for UDMA/66 [ 1.756071] ata3: SATA link down (SStatus 0 SControl 300) [ 1.756114] ata1: SATA link down (SStatus 0 SControl 300) [ 1.868033] usb 1-6: new high-speed USB device number 4 using ehci-pci [ 2.003012] usb 1-6: New USB device found, idVendor=050d, idProduct=945a [ 2.003015] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.003017] usb 1-6: Product: Belkin USB Wireless Adaptor [ 2.003020] usb 1-6: Manufacturer: Manufacturer Realtek [ 2.003022] usb 1-6: SerialNumber: 00e04c000001 [ 2.056546] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc00009bea45, S400 [ 2.076062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.085315] ata2.00: ATA-8: WDC WD10EARX-32N0YB0, 51.0AB51, max UDMA/133 [ 2.085317] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.093319] ata2.00: configured for UDMA/100 [ 2.093469] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARX-32N 51.0 PQ: 0 ANSI: 5 [ 2.094492] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.094498] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.094567] sd 1:0:0:0: [sda] Write Protect is off [ 2.094571] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.094601] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.094785] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.119363] sda: sda1 sda2 < sda5 > [ 2.119768] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.412049] ata4: SATA link down (SStatus 0 SControl 300) [ 2.415976] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B DG01 PQ: 0 ANSI: 5 [ 2.422448] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.422452] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.422578] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.422735] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.564322] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 2.781073] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f [ 2.781079] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.781082] usb 3-1: Product: USB Receiver [ 2.781084] usb 3-1: Manufacturer: Logitech [ 2.793052] hidraw: raw HID events driver (C) Jiri Kosina [ 2.804714] usbcore: registered new interface driver usbhid [ 2.804719] usbhid: USB HID core driver [ 2.809387] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5 [ 2.810513] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1/input0 [ 2.813797] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input6 [ 2.814829] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-1/input1 [ 3.092027] usb 3-2: new low-speed USB device number 3 using ohci-pci [ 3.301063] usb 3-2: New USB device found, idVendor=04f2, idProduct=0841 [ 3.301067] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.301069] usb 3-2: Product: HP USB Multimedia Keyboard [ 3.301071] usb 3-2: Manufacturer: CHICONY [ 3.308649] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input7 [ 3.308883] hid-generic 0003:04F2:0841.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:13.1-2/input0 [ 3.315944] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/input/input8 [ 3.316196] hid-generic 0003:04F2:0841.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:13.1-2/input1 [ 3.620030] usb 3-4: new full-speed USB device number 4 using ohci-pci [ 3.829065] usb 3-4: New USB device found, idVendor=058f, idProduct=9360 [ 3.829068] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.829071] usb 3-4: Product: USB Reader [ 3.829073] usb 3-4: Manufacturer: [ 3.829075] usb 3-4: SerialNumber: 2004888 [ 3.835346] usb-storage 3-4:1.0: USB Mass Storage device detected [ 3.835450] scsi6 : usb-storage 3-4:1.0 [ 3.835741] usbcore: registered new interface driver usb-storage [ 4.839086] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 4.845082] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 4.851077] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 4.857080] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 4.858242] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4.858435] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 4.858584] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 4.858733] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 5.097094] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 5.137090] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 5.147072] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 5.157077] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 17.969071] random: nonblocking pool is initialized [ 22.274168] bio: create slab at 1 [ 22.496412] bio: create slab at 1 [ 23.762994] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 23.763002] EXT4-fs (dm-1): write access will be enabled during recovery [ 24.959702] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 25.175508] EXT4-fs (dm-1): 13 orphan inodes deleted [ 25.175514] EXT4-fs (dm-1): recovery complete [ 25.334754] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 33.546459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.807919] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 33.867908] systemd-udevd[376]: starting version 204 [ 34.178432] parport_pc 00:07: reported by Plug and Play ACPI [ 34.178476] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 34.183567] lp: driver loaded but no devices found [ 34.213060] ppdev: user-space parallel port driver [ 34.280907] lp0: using parport0 (interrupt-driven). [ 34.332904] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.573672] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0 [ 34.708715] MCE: In-kernel MCE decoding enabled. [ 34.737564] EDAC MC: Ver: 3.0.0 [ 34.753887] AMD64 EDAC driver v3.4.0 [ 34.753941] EDAC amd64: DRAM ECC disabled. [ 34.753945] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 34.753945] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 34.753945] (Note that use of the override may cause unknown side effects.) [ 34.951347] type=1400 audit(1414374082.105:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=468 comm="apparmor_parser" [ 34.951360] type=1400 audit(1414374082.105:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser" [ 34.951366] type=1400 audit(1414374082.105:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser" [ 34.951984] type=1400 audit(1414374082.105:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser" [ 34.951991] type=1400 audit(1414374082.105:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser" [ 34.952501] type=1400 audit(1414374082.109:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser" [ 35.134340] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 35.181728] r8712u: Staging version [ 35.181773] r8712u: register rtl8712_netdev_ops to netdev_ops [ 35.181779] usb 1-6: r8712u: USB_SPEED_HIGH with 4 endpoints [ 35.197527] usb 1-6: r8712u: Boot from EFUSE: Autoload OK [ 36.223399] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 36.249317] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 36.890737] init: failsafe main process (668) killed by TERM signal [ 37.543771] usb 1-6: r8712u: CustomerID = 0x0000 [ 37.543779] usb 1-6: r8712u: MAC Address from efuse = ec:1a:59:46:6d:64 [ 37.543782] usb 1-6: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 37.544314] usbcore: registered new interface driver r8712u [ 37.858636] type=1400 audit(1414374085.013:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=759 comm="apparmor_parser" [ 37.858650] type=1400 audit(1414374085.013:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=759 comm="apparmor_parser" [ 37.859264] type=1400 audit(1414374085.013:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=759 comm="apparmor_parser" [ 38.242143] Bluetooth: Core ver 2.17 [ 38.242632] NET: Registered protocol family 31 [ 38.242636] Bluetooth: HCI device and connection manager initialized [ 38.243216] Bluetooth: HCI socket layer initialized [ 38.243223] Bluetooth: L2CAP socket layer initialized [ 38.243234] Bluetooth: SCO socket layer initialized [ 38.279112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.279119] Bluetooth: BNEP filters: protocol multicast [ 38.279134] Bluetooth: BNEP socket layer initialized [ 38.297131] Bluetooth: RFCOMM TTY layer initialized [ 38.297150] Bluetooth: RFCOMM socket layer initialized [ 38.297163] Bluetooth: RFCOMM ver 1.11 [ 38.530054] init: cups main process (781) killed by HUP signal [ 38.530076] init: cups main process ended, respawning [ 38.895802] type=1400 audit(1414374086.049:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=943 comm="apparmor_parser" [ 39.882655] cfg80211: Calling CRDA to update world regulatory domain [ 39.886755] cfg80211: World regulatory domain updated: [ 39.886761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.886764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.886767] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.886769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 39.886771] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.886773] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)