Results generated by fwts: Version V14.09.00 (2014-09-24 07:47:50). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 14/10/14 at 01:10:36 on host Linux lasam 3.16.0-21-generic #28-Ubuntu SMP Mon Oct 6 16:00:43 UTC 2014 x86_64. Command: "fwts ". Running tests: version bios_info oops klog mtrr acpiinfo uefibootpath securebootcert csm maxreadreq crs aspm hpet_check dmicheck microcode msr nx cpufreq maxfreq virt pnp pciirq os2gap mpcheck hda_audio ebda bios32 apicedge wmi wakealarm syntaxcheck pcc osilinux method mcfg fan fadt dmar cstates checksum autobrightness apicinstance acpitables. version: Gather kernel system information. -------------------------------------------------------------------------------- Test 1 of 4: Gather kernel signature. Signature: Ubuntu 3.16.0-21.28-generic 3.16.4 Test 2 of 4: Gather kernel system information. Kernel Version: Linux version 3.16.0-21-generic (buildd@panlong) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu4) ) #28-Ubuntu SMP Mon Oct 6 16:00:43 UTC 2014 Test 3 of 4: Gather kernel boot command line. Kernel boot command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-21-generic.efi.signed root=UUID=ba121a25-b094-49f5-96bf-ade769938060 ro quiet splash video.use_bios_initial_backlight=0 vt.handoff=7 Test 4 of 4: Gather ACPI driver version. ACPI Version: 20140424 ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 4 info only. ================================================================================ bios_info: Gather BIOS DMI information. -------------------------------------------------------------------------------- Test 1 of 1: Gather BIOS DMI information BIOS Vendor : American Megatrends Inc. BIOS Version : P02ADH.008.130604.SK BIOS Release Date : 06/04/2013 Board Name : NP870Z5E-X01HU Board Serial # : 123490EN400015 Board Version : SEC_SW_REVISION_1234567890ABCD Board Asset Tag : No Asset Tag Chassis Serial # : None Chassis Type : 9 Chassis Vendor : SAMSUNG ELECTRONICS CO., LTD. Chassis Version : N/A Chassic Asset Tag : No Asset Tag Product Name : 870Z5E/880Z5E/680Z5E Product Serial # : JDLS91ED900025 Product UUID : 326B67CB-1B20-E311-A891-7A2855732E00 Product Version : P02ADH System Vendor : SAMSUNG ELECTRONICS CO., LTD. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 1 info only. ================================================================================ oops: Scan kernel log for Oopses. -------------------------------------------------------------------------------- Test 1 of 1: Kernel log oops check. PASSED: Test 1, Found no oopses in kernel log. PASSED: Test 1, Found no WARN_ON warnings in kernel log. ================================================================================ 2 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ klog: Scan kernel log for errors and warnings. -------------------------------------------------------------------------------- Test 1 of 1: Kernel log error check. Kernel message: [ 0.025508] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ADVICE: This is not exactly a failure but a warning from the kernel. The MSR_IA32_ENERGY_PERF_BIAS was initialized and defaulted to a high performance bias setting. The kernel has detected this and changed it down to a 'normal' bias setting. Kernel message: [ 0.206048] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ADVICE: This is not exactly a failure mode but a warning from the kernel. The _OSI() method has implemented a match to the 'Linux' query in the DSDT and this is redundant because the ACPI driver matches onto the Windows _OSI strings by default. Kernel message: [ 1.088161] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) ADVICE: The exception comes from kernel cannot find _S1 namespace object that contains the register values for the sleep state when kernel would like to setup all the sleep state information. This means that the kernel does not know how to enter the S1 sleep state, however, it should not be a problem if the S1 sleep state isn't supported intentionally. Kernel message: [ 1.088165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) ADVICE: The exception comes from kernel cannot find _S2 namespace object that contains the register values for the sleep state when kernel would like to setup all the sleep state information. This means that the kernel does not know how to enter the S2 sleep state, however, it should not be a problem if the S2 sleep state isn't supported intentionally. FAILED [MEDIUM] KlogAcpiAlThresholdInvalid: Test 1, MEDIUM Kernel message: [ 1.462470] ACPI: Invalid active2 threshold ADVICE: The ACPI thermal driver has attempted to evaluate an ACPI active threshold control _ALx and this failed to evaluate. This is normally due to broken or buggy _ALx control. This may lead to sub-optimal thermal control. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737555] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737567] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737570] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737575] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737578] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737583] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel message: [ 14.737586] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) ADVICE: ACPI AML intepreter has found some non-conforming AML code. This should be investigated and fixed. FAILED [LOW] KlogAcpiSystemIOConflictLpcIchWatchDogTimer: Test 1, LOW Kernel message: [ 14.737590] lpc_ich: Resource conflict(s) found affecting gpio_ich ADVICE: A resource conflict has occurred between ACPI OperationRegions and the same I/O region used by the lpc_ich driver for the General Purpose I/O (GPIO) region. Sometimes this GPIO region is used by the firmware for rfkill or LED controls or very rarely for the Embedded Controller System Control Interrupt. This may require deeper inspection to check if the conflict will lead to any real issues. However, in the vast majority of cases this warning can be ignored as no harm will occur. FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel message: [ 14.870084] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS ADVICE: ACPI Method _DOD (Enumerate all devices attached to display adapter) is defined but we should also have _DOS (Enable/Disable output switching) defined but it's been omitted. Found 10 unique errors in kernel log. ================================================================================ 0 passed, 10 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ mtrr: MTRR tests. -------------------------------------------------------------------------------- MTRR overview ------------- Reg 0: 0x0000000000000000 - 0x0000000200000000 ( 8192 MB) Write-Back Reg 1: 0x0000000200000000 - 0x0000000220000000 ( 512 MB) Write-Back Reg 2: 0x0000000220000000 - 0x0000000230000000 ( 256 MB) Write-Back Reg 3: 0x00000000e0000000 - 0x0000000100000000 ( 512 MB) Uncached Reg 4: 0x00000000d0000000 - 0x00000000e0000000 ( 256 MB) Uncached Reg 5: 0x00000000cc000000 - 0x00000000d0000000 ( 64 MB) Uncached Reg 6: 0x00000000cb800000 - 0x00000000cc000000 ( 8 MB) Uncached Reg 7: 0x000000022f800000 - 0x0000000230000000 ( 8 MB) Uncached Reg 8: 0x000000022f600000 - 0x000000022f800000 ( 2 MB) Uncached Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xd0000000 to 0xdfffffff (0000:00:02.0) has incorrect attribute Uncached Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xe0000000 to 0xefffffff (0000:01:00.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf0000000 to 0xf0003fff (0000:03:00.0) has incorrect attribute Uncached Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7800000 to 0xf7bfffff (0000:00:02.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7c00000 to 0xf7c00fff (0000:03:00.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7d00000 to 0xf7d01fff (0000:02:00.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7e00000 to 0xf7e3ffff (0000:01:00.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7e40000 to 0xf7e5ffff (0000:01:00.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f00000 to 0xf7f0ffff (0000:00:14.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f10000 to 0xf7f13fff (0000:00:1b.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f15000 to 0xf7f150ff (0000:00:1f.3) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f16000 to 0xf7f167ff (0000:00:1f.2) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f17000 to 0xf7f173ff (0000:00:1d.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f18000 to 0xf7f183ff (0000:00:1a.0) has incorrect attribute Write-Back. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xf7f1a000 to 0xf7f1a00f (0000:00:16.0) has incorrect attribute Write-Back. Test 2 of 3: Validate the MTRR setup across all processors. PASSED: Test 2, All processors have the a consistent MTRR setup. Test 3 of 3: Test for AMD MtrrFixDramModEn being cleared by the BIOS. SKIPPED: Test 3, CPU is not an AMD, cannot test. ================================================================================ 1 passed, 15 failed, 0 warning, 0 aborted, 1 skipped, 0 info only. ================================================================================ acpiinfo: General ACPI information test. -------------------------------------------------------------------------------- Test 1 of 3: Determine Kernel ACPI version. Kernel ACPICA driver version: 20140424, supports ACPI 5.0 Test 2 of 3: Determine machine's ACPI version. FADT X_FIRMWARE_CTRL 64 bit pointer was zero, falling back to using FIRMWARE_CTRL 32 bit pointer. FACP ACPI Version: 5.0 Test 3 of 3: Determine AML compiler. Determine the compiler used to generate the ACPI AML in the DSDT and SSDT. Table DSDT, OEM SECCSD, created with INTL (Intel) compiler. Table SSDT0, OEM SataRe, created with INTL (Intel) compiler. Table SSDT1, OEM PmRef, created with INTL (Intel) compiler. Table SSDT2, OEM PmRef, created with INTL (Intel) compiler. Table SSDT3, OEM SgRef, created with INTL (Intel) compiler. Table SSDT4, OEM AmdRef, created with INTL (Intel) compiler. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 3 info only. ================================================================================ uefibootpath: Sanity check for UEFI Boot Path Boot####. -------------------------------------------------------------------------------- Test 1 of 1: Test UEFI Boot Path Boot####. Name: Boot0000 Info: Windows Boot Manager PASSED: Test 1, Check bootpath Boot0000 test passed. Name: Boot0001 Info: ubuntu PASSED: Test 1, Check bootpath Boot0001 test passed. Name: Boot0002 Info: Windows Boot Manager PASSED: Test 1, Check bootpath Boot0002 test passed. Name: Boot0003 Info: ubuntu PASSED: Test 1, Check bootpath Boot0003 test passed. ================================================================================ 4 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ securebootcert: UEFI secure boot test. -------------------------------------------------------------------------------- Test 1 of 1: UEFI secure boot test. The KEK variable check. GUID: 8BE4DF61-93CA-11D2-AA0D-00E098032B8C Attr: 0x27 (NonVolatile,BootServ,RunTime,TimeBaseAuthenicatedWrite). Check Ubuntu master CA certificate presence in KEK No Ubuntu master CA certificate presence in KEK The SecureBoot variable check. GUID: 8BE4DF61-93CA-11D2-AA0D-00E098032B8C Attr: 0x16 (BootServ,RunTime,AuthenicatedWrite). Value: 0x00 (Secure Boot Mode Off). PASSED: Test 1, Secure boot relative variable SecureBoot check passed. The SetupMode variable check. GUID: 8BE4DF61-93CA-11D2-AA0D-00E098032B8C Attr: 0x16 (BootServ,RunTime,AuthenicatedWrite). Value: 0x00 (User Mode). PASSED: Test 1, Secure boot relative variable SetupMode check passed. The db variable check. GUID: D719B2CB-3D3A-4596-A3BC-DAD00E67656F Attr: 0x27 (NonVolatile,BootServ,RunTime,TimeBaseAuthenicatedWrite). Check Microsoft UEFI CA certificate presence in db PASSED: Test 1, MS UEFI CA 2011 key check passed. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 1 info only. ================================================================================ csm: UEFI Compatibility Support Module test. -------------------------------------------------------------------------------- Test 1 of 1: UEFI Compatibility Support Module test. Checking for UEFI Compatibility Support Module (CSM) No CSM: UEFI firmware seems to have no CSM support. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 1 info only. ================================================================================ maxreadreq: Test firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices. -------------------------------------------------------------------------------- Test 1 of 1: Test firmware settings MaxReadReq for PCI Express devices. PASSED: Test 1, All devices have MaxReadReq set > 128. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ crs: Test PCI host bridge configuration using _CRS. -------------------------------------------------------------------------------- Test 1 of 1: Test PCI host bridge configuration using _CRS. PASSED: Test 1, The kernel has detected a BIOS newer than the end of 2007 (6/4 /2013) and has assumed that your BIOS can correctly specify the host bridge MMIO aperture using _CRS. If this does not work correctly you can override this by booting with "pci=nocrs". ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ aspm: PCIe ASPM test. -------------------------------------------------------------------------------- Test 1 of 2: PCIe ASPM ACPI test. PCIe ASPM is not controlled by Linux kernel. ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS configured. It can be intentional because hardware vendors identified some capability bugs between the motherboard and the add-on cards. Test 2 of 2: PCIe ASPM registers test. WARNING: Test 2, RP 00h:01h.00h L0s not enabled. WARNING: Test 2, RP 00h:01h.00h L1 not enabled. WARNING: Test 2, Device 01h:00h.00h L1 not enabled. ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit latencies, while providing substantial power savings. Disabling L0s of a PCIe device may increases power consumption, and will impact the battery life of a mobile system. ADVICE: The ASPM L1 low power Link state is optimized for maximum power savings with longer entry and exit latencies. Disabling L1 of a PCIe device may increases power consumption, and will impact the battery life of a mobile system significantly. FAILED [MEDIUM] PCIEASPM_Unmatched: Test 2, PCIe ASPM setting was not matched. RP 00h:01h.00h has ASPM = 00h. Device 01h:00h.00h has ASPM = 02h. ADVICE: ASPM control registers between root port and device must match in order for ASPM to be active. Unmatched configuration indicates software did not configure ASPM correctly and the system is not saving power at its full potential. WARNING: Test 2, RP 00h:1Ch.00h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.00h L1 not enabled. WARNING: Test 2, Device 02h:00h.00h L0s not enabled. WARNING: Test 2, Device 02h:00h.00h L1 not enabled. ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit latencies, while providing substantial power savings. Disabling L0s of a PCIe device may increases power consumption, and will impact the battery life of a mobile system. ADVICE: The ASPM L1 low power Link state is optimized for maximum power savings with longer entry and exit latencies. Disabling L1 of a PCIe device may increases power consumption, and will impact the battery life of a mobile system significantly. PASSED: Test 2, PCIe ASPM setting matched was matched. WARNING: Test 2, RP 00h:1Ch.03h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.03h L1 not enabled. WARNING: Test 2, Device 03h:00h.00h L0s not enabled. WARNING: Test 2, Device 03h:00h.00h L1 not enabled. ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit latencies, while providing substantial power savings. Disabling L0s of a PCIe device may increases power consumption, and will impact the battery life of a mobile system. ADVICE: The ASPM L1 low power Link state is optimized for maximum power savings with longer entry and exit latencies. Disabling L1 of a PCIe device may increases power consumption, and will impact the battery life of a mobile system significantly. PASSED: Test 2, PCIe ASPM setting matched was matched. ================================================================================ 2 passed, 1 failed, 11 warnings, 0 aborted, 0 skipped, 0 info only. ================================================================================ hpet_check: HPET configuration tests. -------------------------------------------------------------------------------- Test 1 of 4: Test HPET base in kernel log. This test checks the HPET PCI BAR for each timer block in the timer. The base address is passed by the firmware via an ACPI table. IRQ routing and initialization is also verified by the test. PASSED: Test 1, Found HPET base 0xfed00000 in kernel log. Test 2 of 4: Test HPET base in HPET table. Hardware ID of Event Block: PCI Vendor ID : 0x8086 Legacy IRQ Routing Capable : 1 COUNT_SIZE_CAP counter size: 1 Number of comparitors : 7 Hardwre Revision ID : 0x1 Lower 32 bit base Address : 0xfed00000 Address Space ID : 0x0 Register Bit Width : 0x40 Register Bit Offset : 0x0 Address Width : 0x0 HPET sequence number : 0x0 Minimum clock tick : 0x37ee Page Protection : 0x0 (No guaranteed protection) OEM attributes : 0x0 PASSED: Test 2, HPET looks sane. Test 3 of 4: Test HPET base in DSDT and/or SSDT. PASSED: Test 3, HPET base matches that between DSDT and the kernel (0xfed00000). Test 4 of 4: Test HPET configuration. PASSED: Test 4, Vendor ID looks sane: 0x8086. PASSED: Test 4, Valid clock period 69841279. ================================================================================ 5 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ dmicheck: DMI/SMBIOS table tests. -------------------------------------------------------------------------------- Test 1 of 2: Find and test SMBIOS Table Entry Point. This test tries to find and sanity check the SMBIOS data structures. PASSED: Test 1, Found SMBIOS Table Entry Point at 0xca7e3498 SMBIOS Entry Point Structure: Anchor String : _SM_ Checksum : 0xc2 Entry Point Length : 0x1f Major Version : 0x02 Minor Version : 0x07 Maximum Struct Size : 0xb8 Entry Point Revision : 0x00 Formatted Area : 0x00 0x00 0x00 0x00 0x00 Intermediate Anchor : _DMI_ Intermediate Checksum : 0x0e Structure Table Length : 0x0af5 Structure Table Address: 0xca60b018 # of SMBIOS Structures : 0x0042 SBMIOS BCD Revision : 27 PASSED: Test 1, SMBIOS Table Entry Point Checksum is valid. PASSED: Test 1, SMBIOS Table Entry Point Length is valid. PASSED: Test 1, SMBIOS Table Entry Intermediate Anchor String _DMI_ is valid. PASSED: Test 1, SMBIOS Table Entry Point Intermediate Checksum is valid. PASSED: Test 1, SMBIOS Table Entry Structure Table Address and Length looks valid. Test 2 of 2: Test DMI/SMBIOS tables for errors. PASSED: Test 2, Entry @ 0xca60b018 'BIOS Information (Type 0)' PASSED: Test 2, Entry @ 0xca60b06a 'System Information (Type 1)' FAILED [MEDIUM] DMIAssetTag: Test 2, String index 0x05 in table entry 'Base Board Information (Type 2)' @ 0xca60b0f0, field 'Asset Tag', offset 0x08 has a default value 'No Asset Tag' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless. Note that the kernel uses this field so it probably should be corrected to ensure the kernel is using sane values. ADVICE: It may be worth checking against section 7.3 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [MEDIUM] DMISerialNumber: Test 2, String index 0x02 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Version', offset 0x06 has a default value 'N/A' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless. Note that the kernel uses this field so it probably should be corrected to ensure the kernel is using sane values. FAILED [MEDIUM] DMISerialNumber: Test 2, String index 0x03 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Serial Number', offset 0x07 has a default value 'None' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless. Note that the kernel uses this field so it probably should be corrected to ensure the kernel is using sane values. FAILED [MEDIUM] DMIAssetTag: Test 2, String index 0x04 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Asset Tag', offset 0x08 has a default value 'No Asset Tag' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless. Note that the kernel uses this field so it probably should be corrected to ensure the kernel is using sane values. FAILED [LOW] DMISerialNumber: Test 2, String index 0x05 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'SKU Number', offset 0x15 has a default value 'To be filled by O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.4 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b1d1 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b1e9 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b201 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b217 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b22d 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b243 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b257 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b26b 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b284 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b2a7 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b2c0 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b2da 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b2f4 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b309 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b325 'Port Connector Information (Type 8)' PASSED: Test 2, Entry @ 0xca60b341 'System Slot Information (Type 9)' PASSED: Test 2, Entry @ 0xca60b358 'System Slot Information (Type 9)' PASSED: Test 2, Entry @ 0xca60b36f 'System Slot Information (Type 9)' PASSED: Test 2, Entry @ 0xca60b386 'System Slot Information (Type 9)' PASSED: Test 2, Entry @ 0xca60b39d 'System Slot Information (Type 9)' PASSED: Test 2, Entry @ 0xca60b3b4 'On Board Devices (Type 10)' PASSED: Test 2, Entry @ 0xca60b3ca 'OEM Strings (Type 11)' PASSED: Test 2, Entry @ 0xca60b430 'System Configuration Options (Type 12)' PASSED: Test 2, Entry @ 0xca60b4a0 'System Boot Information (Type 32)' PASSED: Test 2, Entry @ 0xca60b4b6 'Management Device (Type 34)' FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x0b) while accessing entry 'Voltage Probe (Type 26)' @ 0xca60b4c9, field 'Location (bits 0..4)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Voltage Probe (Type 26)' @ 0xca60b4c9, field 'Status (bits 5..7)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. ADVICE: It may be worth checking against section 7.27 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b4e6 'Management Device Threshold Data (Type 36)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b4f8, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.36 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x0f) while accessing entry 'Temperature Probe (Type 28)' @ 0xca60b51b, field 'Location (bits 0..4)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Temperature Probe (Type 28)' @ 0xca60b51b, field 'Status (bits 5..7)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. ADVICE: It may be worth checking against section 7.29 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b538 'Management Device Threshold Data (Type 36)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b54a, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.36 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x12 (range allowed 0x01..0x09, 0x10..0x11) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b56d, field 'Device Type', offset 0x06, mask 0x1f FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b56d, field 'Status (bits 5..7)', offset 0x06 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. ADVICE: It may be worth checking against section 7.28 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b58b 'Management Device Threshold Data (Type 36)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b59d, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.36 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x12 (range allowed 0x01..0x09, 0x10..0x11) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b5c0, field 'Device Type', offset 0x06, mask 0x1f FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b5c0, field 'Status (bits 5..7)', offset 0x06 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. ADVICE: It may be worth checking against section 7.28 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b5d1 'Management Device Threshold Data (Type 36)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b5e3, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.36 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x0b) while accessing entry 'Electrical Current Probe (Type 29)' @ 0xca60b606, field 'Location (bits 0..4)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. FAILED [HIGH] DMIValueOutOfRange: Test 2, Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Electrical Current Probe (Type 29)' @ 0xca60b606, field 'Status (bits 5..7)', offset 0x05 ADVICE: A value that is out of range is incorrect and not conforming to the SMBIOS specification. This field is not currently used by the Linux kernel, so this firmware bug shouldn't cause any problems. ADVICE: It may be worth checking against section 7.30 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b621 'Management Device Threshold Data (Type 36)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b633, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.36 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b656 'Voltage Probe (Type 26)' PASSED: Test 2, Entry @ 0xca60b673 'Temperature Probe (Type 28)' PASSED: Test 2, Entry @ 0xca60b690 'Cooling Device (Type 27)' PASSED: Test 2, Entry @ 0xca60b6ae 'Electrical Current Probe (Type 29)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x01 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Location', offset 0x05 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x02 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Device Name', offset 0x06 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x03 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Manufacturer', offset 0x07 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x04 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Serial Number', offset 0x08 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x05 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Asset Tag', offset 0x09 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x06 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Model Part Number', offset 0x0a has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x07 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Revision Level', offset 0x0b has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.40 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b781 'Onboard Device (Type 41)' PASSED: Test 2, Entry @ 0xca60b79a 'Onboard Device (Type 41)' PASSED: Test 2, Entry @ 0xca60b7b3 'Onboard Device (Type 41)' PASSED: Test 2, Entry @ 0xca60b7cd 'Cache Information (Type 7)' PASSED: Test 2, Entry @ 0xca60b7f1 'Cache Information (Type 7)' PASSED: Test 2, Entry @ 0xca60b815 'Cache Information (Type 7)' PASSED: Test 2, Entry @ 0xca60b839 'Physical Memory Array (Type 16)' FAILED [LOW] DMIAssetTag: Test 2, String index 0x04 in table entry 'Processor Information (Type 4)' @ 0xca60b852, field 'Asset Tag', offset 0x21 has a default value 'Fill By OEM' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMIAssetTag: Test 2, String index 0x05 in table entry 'Processor Information (Type 4)' @ 0xca60b852, field 'Part Number', offset 0x22 has a default value 'Fill By OEM' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.5 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [LOW] DMISerialNumber: Test 2, String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMIAssetTag: Test 2, String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.18 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [LOW] DMISerialNumber: Test 2, String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMIAssetTag: Test 2, String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.18 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). FAILED [LOW] DMISerialNumber: Test 2, String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b995, field 'Serial Number', offset 0x18 has a default value '00000000' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMIAssetTag: Test 2, String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b995, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.18 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60b9fc 'Memory Device Mapped Address (Type 20)' FAILED [LOW] DMISerialNumber: Test 2, String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMIAssetTag: Test 2, String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. FAILED [LOW] DMISerialNumber: Test 2, String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. ADVICE: The DMI table contains data which is clearly been left in a default setting and not been configured for this machine. Somebody has probably forgotten to define this field and it basically means this field is effectively useless, however the kernel does not use this data so the issue is fairly low. ADVICE: It may be worth checking against section 7.18 of the System Management BIOS (SMBIOS) Reference Specification (see http://www.dmtf.org/standards /smbios). PASSED: Test 2, Entry @ 0xca60ba7d 'Memory Array Mapped Address (Type 19)' PASSED: Test 2, Entry @ 0xca60ba9e 'Unknown (Type 131)' PASSED: Test 2, Entry @ 0xca60bae0 'BIOS Language Information (Type 13)' PASSED: Test 2, Entry @ 0xca60bb07 'End of Table (Type 127)' ================================================================================ 54 passed, 43 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ microcode: Test if system is using latest microcode. -------------------------------------------------------------------------------- Test 1 of 1: Test for most recent microcode being loaded. This test verifies if the firmware has put a recent revision of the microcode into the processor at boot time. Recent microcode is important to have all the required features and errata updates for the processor. The kernel did not report that CPU 0 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 1 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 2 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 3 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 4 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 5 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 6 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. The kernel did not report that CPU 7 has had a microcode update. The current firmware is revision 0x17 and probably has not been updated. SKIPPED: Test 1, Could not determine from kernel log if latest microcode has been loaded. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 1 skipped, 0 info only. ================================================================================ msr: MSR register tests. -------------------------------------------------------------------------------- Test 1 of 5: Test CPU generic MSRs. PASSED: Test 1, MSR 0x00000001 P5_MC_TYPE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000006 MONITOR_FILTER_SIZE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000017 PLATFORM_ID is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000002a EBL_CR_POWERON is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000001b APIC_BASE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000003a FEATURE_CONTROL is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000008b BIOS_SIGN_ID is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000000fe MTRRCAP is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000174 SYSENTER_CS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000175 SYSENTER_ESP is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000176 SYSENTER_EIP is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000179 MCG_CAP is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000017a MCG_STATUS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000019a CLOCK_MODULATION is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000019b THERM_INTERRUPT is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000001a0 MISC_ENABLE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000001b2 PACKAGE_THERM_INTERRUPT is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000001f2 SMRR_PHYSBASE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000001f3 SMRR_PHYSMASK is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000200 MTRR_PHYSBASE0 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000201 MTRR_PHYSMASK0 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000202 MTRR_PHYSBASE1 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000203 MTRR_PHYSMASK1 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000204 MTRR_PHYSBASE2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000205 MTRR_PHYSMASK2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000206 MTRR_PHYSBASE3 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000207 MTRR_PHYSMASK3 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000208 MTRR_PHYSBASE4 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000209 MTRR_PHYSMASK4 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020a MTRR_PHYSBASE5 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020b MTRR_PHYSMASK5 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020c MTRR_PHYSBASE6 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020d MTRR_PHYSMASK6 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020e MTRR_PHYSBASE7 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000020f MTRR_PHYSMASK7 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000210 MTRR_PHYSBASE8 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000211 MTRR_PHYSMASK8 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000212 MTRR_PHYSBASE9 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000213 MTRR_PHYSMASK9 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000250 MTRR_FIX64K_000 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000258 MTRR_FIX16K_800 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000259 MTRR_FIX16K_a00 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000268 MTRR_FIX4K_C000 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000269 MTRR_FIX4K_C800 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026a MTRR_FIX4K_D000 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026b MTRR_FIX4K_D800 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026c MTRR_FIX4K_E000 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026d MTRR_FIX4K_E800 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026e MTRR_FIX4K_F000 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000026f MTRR_FIX4K_F800 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000277 PAT is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000280 MC0_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000281 MC1_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000282 MC2_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000283 MC3_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000284 MC4_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000285 MC5_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000286 MC6_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000287 MC7_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000288 MC8_CTL2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000002ff MTRR_DEF_TYPE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x000003f1 PEBS_ENABLE is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000480 VMX_BASIC is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000481 VMX_PINPASED_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000482 VMX_PROCBASED_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000483 VMX_EXIT_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000484 VMX_ENTRY_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000485 VMX_MISC is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000486 VMX_CR0_FIXED0 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000487 VMX_CR0_FIXED1 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000488 VMX_CR4_FIXED0 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000489 VMX_CR4_FIXED1 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048a VMX_VMX_VMCS_ENUM is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048b VMX_PROCBASED_CTLS2 is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048c VMX_EPT_VPID_CAP is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048d VMX_TRUE_PINBASED_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048e VMX_TRUE_PROCBASED_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x0000048f VMX_TRUE_EXIT_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0x00000490 VMX_TRUE_ENTRY_CTLS is consistent across 8 CPUs. PASSED: Test 1, MSR 0xc0000080 EFER is consistent across 8 CPUs. PASSED: Test 1, MSR 0xc0000081 STAR is consistent across 8 CPUs. PASSED: Test 1, MSR 0xc0000082 LSTAR is consistent across 8 CPUs. PASSED: Test 1, MSR 0xc0000084 FMASK is consistent across 8 CPUs. PASSED: Test 1, MSR 0xc0000102 KERNEL_GS_BASE is consistent across 8 CPUs. Test 2 of 5: Test CPU specific model MSRs. CPU family: 0x6, model: 0x3a (Ivybridge) PASSED: Test 2, MSR 0x000000ce MSR_PLATFORM_INFO is consistent across 8 CPUs. PASSED: Test 2, MSR 0x000000e2 MSR_PKG_CST_CONFIG_CONTROL is consistent across 8 CPUs. PASSED: Test 2, MSR 0x00000648 MSR_CONFIG_TDP_NOMINAL is consistent across 8 CPUs. PASSED: Test 2, MSR 0x00000649 MSR_CONFIG_TDP_LEVEL1 is consistent across 8 CPUs. PASSED: Test 2, MSR 0x0000064a MSR_CONFIG_TDP_LEVEL2 is consistent across 8 CPUs. PASSED: Test 2, MSR 0x0000064b MSR_CONFIG_TDP_CONTROL is consistent across 8 CPUs. PASSED: Test 2, MSR 0x0000064c MSR_TURBO_ACTIVATION_RATIO is consistent across 8 CPUs. Test 3 of 5: Test all P State Ratios. PASSED: Test 3, MSR 0x000000ce Minimum P-State is consistent across 8 CPUs. PASSED: Test 3, MSR 0x000000ce Maximum P-State is consistent across 8 CPUs. Test 4 of 5: Test C1 and C3 autodemotion. PASSED: Test 4, MSR 0x000000e2 C1 and C3 Autodemotion is consistent across 8 CPUs. C1 and C3 Autodemotion enabled. Test 5 of 5: Test SMRR MSR registers. PASSED: Test 5, MSR 0x000001f2 SMRR_PHYSBASE is consistent across 8 CPUs. PASSED: Test 5, MSR 0x000001f2 SMRR_TYPE is consistent across 8 CPUs. PASSED: Test 5, MSR 0x000001f3 SMRR_PHYSMASK is consistent across 8 CPUs. PASSED: Test 5, MSR 0x000001f3 SMRR_VALID is consistent across 8 CPUs. ================================================================================ 98 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ nx: Test if CPU NX is disabled by the BIOS. -------------------------------------------------------------------------------- Test 1 of 3: Test CPU NX capability. PASSED: Test 1, CPU has NX flags, BIOS is not disabling it. Test 2 of 3: Test all CPUs have same BIOS set NX flag. This test verifies that all CPUs have the same NX flag setting. Although rare, BIOS may set the NX flag differently per CPU. PASSED: Test 2, All 8 CPUs have the same NX flag set. Test 3 of 3: Test all CPUs have same msr setting in MSR 0x1a0. This test verifies that all CPUs have the same NX flag setting by examining the per CPU MSR register 0x1a0. PASSED: Test 3, All 8 CPUs have the NX flag in MSR 0x1a0 set. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ cpufreq: CPU frequency scaling tests. -------------------------------------------------------------------------------- Test 1 of 1: CPU P-State tests. For each processor in the system, this test steps through the various frequency states (P-states) that the BIOS advertises for the processor. For each processor /frequency combination, a quick performance value is measured. The test then validates that: 1. Each processor has the same number of frequency states. 2. Higher advertised frequencies have a higher performance. 3. No duplicate frequency values are reported by the BIOS. 4. BIOS doing Sw_All P-state coordination across cores. 5. BIOS doing Sw_Any P-state coordination across cores. WARNING: Test 1, CPU frequency scaling not supported. ADVICE: Scaling driver 'intel_pstate ' is enabled and this does not seem to allow CPU frequency scaling. ================================================================================ 0 passed, 0 failed, 1 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ maxfreq: Test max CPU frequencies against max scaling frequency. -------------------------------------------------------------------------------- Test 1 of 1: Maximum CPU frequency test. This test checks the maximum CPU frequency as detected by the kernel for each CPU against maxiumum frequency as specified by the BIOS frequency scaling settings. PASSED: Test 1, 8 CPUs passed the maximum frequency check. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ virt: CPU Virtualisation Configuration test. -------------------------------------------------------------------------------- Test 1 of 1: CPU Virtualisation Configuration test. Check VT/VMX Virtualization extensions are set up correctly. PASSED: Test 1, Virtualization extensions supported and enabled by BIOS. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ pnp: BIOS Support Installation structure test. -------------------------------------------------------------------------------- Test 1 of 1: PnP BIOS Support Installation structure test. This test tries to find and sanity check the Plug and Play BIOS Support Installation Check structure. Could not find PnP BIOS Support Installation Check structure. This is not necessarily a failure. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ pciirq: PCI IRQ Routing Table test. -------------------------------------------------------------------------------- Test 1 of 1: PCI IRQ Routing Table test. This test tries to find and sanity check the PCI IRQ Routing Table, as defined by http://www.microsoft.com/taiwan/whdc/archive/pciirq.mspx and described in pages 233-238 of PCI System Architecture, Fourth Edition, Mindshare, Inc. (1999). NOTE: The PCI IRQ Routing Table only really knows about ISA IRQs and is generally not used with APIC. Could not find PCI IRQ Routing Table. Since this table is for legacy BIOS systems which don't have ACPI support this is generally not a problem. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ os2gap: OS/2 memory hole test. -------------------------------------------------------------------------------- Test 1 of 1: Test the OS/2 15Mb memory hole is absent. PASSED: Test 1, No OS/2 memory hole found. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ mpcheck: MultiProcessor Tables tests. -------------------------------------------------------------------------------- Failed to get _MP_ data from firmware. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 9 skipped, 0 info only. ================================================================================ hda_audio: HDA Audio Pin Configuration test. -------------------------------------------------------------------------------- Test 1 of 1: HDA Audio Pin Configuration test. Checking 'hwC0D0': Vendor Name : Realtek Vendor ID : 0x10ec0269 Subsystem ID : 0x144dc0e6 Revision ID : 0x100202 BIOS pin configurations: Pin Setting 0x0012 0x90a60130 0x0014 0x40008008 0x0015 0x03211010 0x0017 0x411111f0 0x0018 0x03a11040 0x0019 0x411111f0 0x001a 0x411111f0 0x001b 0x90170120 0x001d 0x4084a205 0x001e 0x411111f0 PASSED: Test 1, Default BIOS pin configurations did not have software override. Checking 'hwC0D3': Vendor Name : Intel Vendor ID : 0x80862806 Subsystem ID : 0x80860101 Revision ID : 0x100000 BIOS pin configurations: Pin Setting 0x0005 0x18560010 0x0006 0x58560020 0x0007 0x58560030 PASSED: Test 1, Default BIOS pin configurations did not have software override. ================================================================================ 2 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ ebda: Test EBDA region is mapped and reserved in memory map table. -------------------------------------------------------------------------------- Machine is not using traditional BIOS firmware, skipping test. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 1 skipped, 0 info only. ================================================================================ bios32: BIOS32 Service Directory test. -------------------------------------------------------------------------------- Machine is not using traditional BIOS firmware, skipping test. ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 1 skipped, 0 info only. ================================================================================ apicedge: APIC edge/level test. -------------------------------------------------------------------------------- Test 1 of 1: Legacy and PCI Interrupt Edge/Level trigger tests. PASSED: Test 1, Legacy interrupts are edge and PCI interrupts are level triggered. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ wmi: Extract and analyse Windows Management Instrumentation (WMI). -------------------------------------------------------------------------------- Test 1 of 1: Windows Management Instrumentation test. \_SB_.PCI0.AMW0._WDG (1 of 2) GUID: C16C47BA-50E3-444A-AF3A-B1C348380000 WMI Object: Flags : 0x01 (Expensive) Object ID : 00 Instance : 0x01 \_SB_.PCI0.AMW0._WDG (2 of 2) GUID: C16C47BA-50E3-444A-AF3A-B1C348380001 WMI Method: Flags : 0x02 (Method) Object ID : 00 Instance : 0x01 PASSED: Test 1, C16C47BA-50E3-444A-AF3A-B1C348380001 has associated method \_SB_.PCI0.AMW0.WM00 ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ wakealarm: ACPI Wakealarm tests. -------------------------------------------------------------------------------- Test 1 of 4: Test existence of RTC with alarm interface. PASSED: Test 1, RTC with a RTC alarm ioctl() interface found. Test 2 of 4: Trigger wakealarm for 1 seconds in the future. Trigger wakealarm for 1 seconds in the future. PASSED: Test 2, RTC wakealarm was triggered successfully. Test 3 of 4: Test if wakealarm is fired. PASSED: Test 3, RTC wakealarm triggered and fired successfully. Test 4 of 4: Multiple wakealarm firing tests. Trigger wakealarm for 1 seconds in the future. Trigger wakealarm for 2 seconds in the future. Trigger wakealarm for 3 seconds in the future. Trigger wakealarm for 4 seconds in the future. PASSED: Test 4, RTC wakealarm triggered and fired successfully. ================================================================================ 4 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ syntaxcheck: Re-assemble DSDT and SSDTs to find syntax errors and warnings. -------------------------------------------------------------------------------- Test 1 of 1: Disassemble and reassemble DSDT and SSDTs. Checking ACPI table DSDT (#0) FAILED [MEDIUM] AMLAsmASL_MSG_TAG_LARGER: Test 1, Assembler warning in line 2109 Line | AML source -------------------------------------------------------------------------------- 02106| Add (Subtract (M1MX, M1MN), One, M1LN) /* \_SB_.PCI0._CRS.M1LN */ 02107| If (LOr (LEqual (MM64, Zero), LLessEqual (OSYS, 0x07D3))) 02108| { 02109| CreateDWordField (BUF0, \_SB.PCI0._Y0F._LEN, MSLN) // _LEN: Length | ^ | Warning 3128: ResourceTag larger than Field (Size mismatch, Tag: 64 bits, Field: 32 bits) 02110| Store (Zero, MSLN) /* \_SB_.PCI0._CRS.MSLN */ 02111| } 02112| Else ================================================================================ ADVICE: (for Warning #3128, ASL_MSG_TAG_LARGER): The resource tag length is larger than the field length. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 3219 Line | AML source -------------------------------------------------------------------------------- 03216| { 03217| Name (_HID, EisaId ("PNP0C09") /* Embedded Controller Device */) // _HID: Hardware ID 03218| Name (_UID, One) // _UID: Unique ID 03219| Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 03220| { 03221| Name (BFFR, ResourceTemplate () 03222| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 5035 Line | AML source -------------------------------------------------------------------------------- 05032| Offset (0x04) 05033| } 05034| 05035| Method (UXDV, 1, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 05036| { 05037| Store (0xFF, Local0) 05038| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 5038 Line | AML source -------------------------------------------------------------------------------- 05035| Method (UXDV, 1, NotSerialized) 05036| { 05037| Store (0xFF, Local0) 05038| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 05039| Store (Add (Arg0, Zero), _T_0) /* \UXDV._T_0 */ 05040| If (LEqual (_T_0, 0x03F8)) 05041| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 5097 Line | AML source -------------------------------------------------------------------------------- 05094| Return (Local0) 05095| } 05096| 05097| Method (RRIO, 4, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 05098| { 05099| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler 05100| Store (Add (Arg0, Zero), _T_0) /* \RRIO._T_0 */ ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 5099 Line | AML source -------------------------------------------------------------------------------- 05096| 05097| Method (RRIO, 4, NotSerialized) 05098| { 05099| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 05100| Store (Add (Arg0, Zero), _T_0) /* \RRIO._T_0 */ 05101| If (LEqual (_T_0, Zero)) 05102| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 5433 Line | AML source -------------------------------------------------------------------------------- 05430| Store (And (Arg0, 0x07), DSEN) /* \DSEN */ 05431| } 05432| 05433| Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 05434| { 05435| If (CondRefOf (IDAB)) 05436| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line 5851 Line | AML source -------------------------------------------------------------------------------- 05848| } 05849| } 05850| 05851| Method (_BCM, 1, Serialized) // _BCM: Brightness Control Method | ^ | Warning 3115: Not all control paths return a value (_BCM) 05852| { 05853| P8XH (Zero, Arg0) 05854| If (LAnd (LGreaterEqual (Arg0, Zero), LLessEqual (Arg0, 0x64))) ================================================================================ ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths do not return a value. All control paths that return must return a value otherwise unexpected behaviour may occur. This error occurs because a branch on an conditional op-code returns a value and another does not, which is inconsistent behaviour. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 8775 Line | AML source -------------------------------------------------------------------------------- 08772| { 08773| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 08774| { 08775| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 08776| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC1.HUBN.PR01.PR14._DSM._T_0 */ 08777| If (LEqual (_T_0, Zero)) 08778| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 8860 Line | AML source -------------------------------------------------------------------------------- 08857| { 08858| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 08859| { 08860| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 08861| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC1.HUBN.PR01.PR15._DSM._T_0 */ 08862| If (LEqual (_T_0, Zero)) 08863| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 8945 Line | AML source -------------------------------------------------------------------------------- 08942| { 08943| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 08944| { 08945| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 08946| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC1.HUBN.PR01.PR16._DSM._T_0 */ 08947| If (LEqual (_T_0, Zero)) 08948| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 9030 Line | AML source -------------------------------------------------------------------------------- 09027| { 09028| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 09029| { 09030| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 09031| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC1.HUBN.PR01.PR17._DSM._T_0 */ 09032| If (LEqual (_T_0, Zero)) 09033| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [HIGH] AMLAsmASL_MSG_RESERVED_OPERAND_TYPE: Test 1, Assembler error in line 9318 Line | AML source -------------------------------------------------------------------------------- 09315| Device (WCAM) 09316| { 09317| Name (_ADR, 0x04) // _ADR: Address 09318| Name (_PLD, Buffer (0x14) // _PLD: Physical Location of Device | ^ | Error 6105: Invalid object type for reserved name (_PLD: found Buffer, Package required) 09319| { 09320| /* 0000 */ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ........ */ 09321| /* 0008 */ 0x20, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ....... */ ================================================================================ ADVICE: (for Error #6105, ASL_MSG_RESERVED_OPERAND_TYPE): The object type for the reserved name does not match the expected type. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 9356 Line | AML source -------------------------------------------------------------------------------- 09353| { 09354| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 09355| { 09356| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 09357| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC2.HUBN.PR01.PR14._DSM._T_0 */ 09358| If (LEqual (_T_0, Zero)) 09359| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 9441 Line | AML source -------------------------------------------------------------------------------- 09438| { 09439| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 09440| { 09441| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 09442| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC2.HUBN.PR01.PR15._DSM._T_0 */ 09443| If (LEqual (_T_0, Zero)) 09444| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 9526 Line | AML source -------------------------------------------------------------------------------- 09523| { 09524| If (LEqual (Arg0, ToUUID ("a5fc708f-8775-4ba6-bd0c-ba90a1ec72f8"))) 09525| { 09526| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 09527| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.EHC2.HUBN.PR01.PR16._DSM._T_0 */ 09528| If (LEqual (_T_0, Zero)) 09529| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line 10375 Line | AML source -------------------------------------------------------------------------------- 10372| 10373| Device (_SB.TPM) 10374| { 10375| Method (_HID, 0, NotSerialized) // _HID: Hardware ID | ^ | Warning 3115: Not all control paths return a value (_HID) 10376| { 10377| If (TCMF) {} 10378| Else ================================================================================ ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths do not return a value. All control paths that return must return a value otherwise unexpected behaviour may occur. This error occurs because a branch on an conditional op-code returns a value and another does not, which is inconsistent behaviour. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 10375 Line | AML source -------------------------------------------------------------------------------- 10372| 10373| Device (_SB.TPM) 10374| { 10375| Method (_HID, 0, NotSerialized) // _HID: Hardware ID | ^ | Warning 3107: Reserved method must return a value (Integer/String required for _HID) 10376| { 10377| If (TCMF) {} 10378| Else ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 10433 Line | AML source -------------------------------------------------------------------------------- 10430| DAT, 8 10431| } 10432| 10433| Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 10434| { 10435| If (LEqual (Arg0, ToUUID ("3dddfaa6-361b-4eb4-a424-8d10089d1653") /* Physical Presence Interface */)) 10436| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 10437 Line | AML source -------------------------------------------------------------------------------- 10434| { 10435| If (LEqual (Arg0, ToUUID ("3dddfaa6-361b-4eb4-a424-8d10089d1653") /* Physical Presence Interface */)) 10436| { 10437| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 10438| Store (ToInteger (Arg2), _T_0) /* \_SB_.TPM_._DSM._T_0 */ 10439| If (LEqual (_T_0, Zero)) 10440| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 10620 Line | AML source -------------------------------------------------------------------------------- 10617| { 10618| If (LEqual (Arg0, ToUUID ("376054ed-cc13-4675-901c-4756d7f2d45d"))) 10619| { 10620| Name (_T_1, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_1) 10621| Store (ToInteger (Arg2), _T_1) /* \_SB_.TPM_._DSM._T_1 */ 10622| If (LEqual (_T_1, Zero)) 10623| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 10724 Line | AML source -------------------------------------------------------------------------------- 10721| Return (Zero) 10722| } 10723| 10724| Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 10725| { 10726| If (LEqual (Arg0, ToUUID ("3dddfaa6-361b-4eb4-a424-8d10089d1653") /* Physical Presence Interface */)) 10727| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 10728 Line | AML source -------------------------------------------------------------------------------- 10725| { 10726| If (LEqual (Arg0, ToUUID ("3dddfaa6-361b-4eb4-a424-8d10089d1653") /* Physical Presence Interface */)) 10727| { 10728| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 10729| Store (ToInteger (Arg2), _T_0) /* \_SB_.PCI0.ITPM._DSM._T_0 */ 10730| If (LEqual (_T_0, Zero)) 10731| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 10854 Line | AML source -------------------------------------------------------------------------------- 10851| { 10852| If (LEqual (Arg0, ToUUID ("376054ed-cc13-4675-901c-4756d7f2d45d"))) 10853| { 10854| Name (_T_1, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_1) 10855| Store (ToInteger (Arg2), _T_1) /* \_SB_.PCI0.ITPM._DSM._T_1 */ 10856| If (LEqual (_T_1, Zero)) 10857| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [HIGH] AMLAsmASL_MSG_UPPER_CASE: Test 1, Assembler error in line 10935 Line | AML source -------------------------------------------------------------------------------- 10932| { 10933| Device (AMW0) 10934| { 10935| Name (_HID, "pnp0c14") // _HID: Hardware ID | ^ | Error 6136: Non-hex letters must be upper case (pnp0c14) 10936| Name (_UID, Zero) // _UID: Unique ID 10937| Name (_WDG, Buffer (0x28) 10938| { ================================================================================ ADVICE: (for Error #6136, ASL_MSG_UPPER_CASE): Characters in literal string that are not hexadecimal letters must be upper case. Table DSDT (0) reassembly: Found 2 errors, 4 warnings, 19 remarks. Checking ACPI table SSDT (#1) FAILED [MEDIUM] AMLAsmASL_MSG_NO_REGION: Test 1, Assembler warning in line 61 Line | AML source -------------------------------------------------------------------------------- 00058| Scope (\_SB.PCI0.SAT0) 00059| { 00060| Name (REGF, One) 00061| Method (_REG, 2, NotSerialized) // _REG: Region Availability | ^ | Warning 3079: _REG has no corresponding Operation Region 00062| { 00063| If (LEqual (Arg0, 0x02)) 00064| { ================================================================================ ADVICE: (for Warning #3079, ASL_MSG_NO_REGION): _REG requires a corresponding Operation Region, however one was not found. Table SSDT (1) reassembly: Found 0 errors, 1 warnings, 0 remarks. Checking ACPI table SSDT (#2) FAILED [HIGH] AMLAsmASL_MSG_SYNTAX: Test 1, Assembler error in line 244 Line | AML source -------------------------------------------------------------------------------- 00241| 0x0000000D 00242| } 00243| }) 00244| Package (0x06) | ^ | Error 6126: syntax error, unexpected PARSEOP_PACKAGE 00245| { 00246| 0x80000000, 00247| 0x80000000, ================================================================================ ADVICE: (for Error #6126, ASL_MSG_SYNTAX): The disassembled code cannot be reassembled using the strict IASL compiler as it contains syntax errors. FAILED [HIGH] SyntaxCheckIASLCompilerAborted: Test 1, Compilation aborted early due to a parser detected syntax error. ADVICE: Some subsequent errors may not be detected because the compiler had to terminate prematurely. If the compiler did not abort early then potentially correct code may parse incorrectly producing some or many false positive errors. Table SSDT (2) reassembly: Found 1 errors, 0 warnings, 0 remarks. Checking ACPI table SSDT (#3) FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 127 Line | AML source -------------------------------------------------------------------------------- 00124| { 00125| Store (CPDC (Arg0), Local0) 00126| GCAP (Local0) 00127| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00128| } 00129| 00130| Method (CTLD, 0, NotSerialized) ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 130 Line | AML source -------------------------------------------------------------------------------- 00127| Return (Local0) 00128| } 00129| 00130| Method (CTLD, 0, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00131| { 00132| If (LEqual (\ECON, One)) 00133| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 159 Line | AML source -------------------------------------------------------------------------------- 00156| Return (Local0) 00157| } 00158| 00159| Method (CPDC, 1, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00160| { 00161| CreateDWordField (Arg0, Zero, REVS) 00162| CreateDWordField (Arg0, 0x04, SIZE) ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 174 Line | AML source -------------------------------------------------------------------------------- 00171| Return (COSC (ToUUID ("4077a616-290c-47be-9ebd-d87058713953"), REVS, SIZE, Local2)) 00172| } 00173| 00174| Method (COSC, 4, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00175| { 00176| CreateDWordField (Arg3, Zero, STS0) 00177| CreateDWordField (Arg3, 0x04, CAP0) ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 177 Line | AML source -------------------------------------------------------------------------------- 00174| Method (COSC, 4, NotSerialized) 00175| { 00176| CreateDWordField (Arg3, Zero, STS0) 00177| CreateDWordField (Arg3, 0x04, CAP0) | ^ | Remark 2089: Object is not referenced (Name is within method [COSC]) 00178| CreateDWordField (Arg0, Zero, IID0) 00179| CreateDWordField (Arg0, 0x04, IID1) 00180| CreateDWordField (Arg0, 0x08, IID2) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 203 Line | AML source -------------------------------------------------------------------------------- 00200| Return (Arg3) 00201| } 00202| 00203| Method (GCAP, 1, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00204| { 00205| CreateDWordField (Arg0, Zero, STS0) 00206| CreateDWordField (Arg0, 0x04, CAP0) ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 243 Line | AML source -------------------------------------------------------------------------------- 00240| { 00241| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00242| GCAP (Local0) 00243| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00244| } 00245| 00246| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 283 Line | AML source -------------------------------------------------------------------------------- 00280| Return (Zero) 00281| } 00282| 00283| Method (APCT, 0, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00284| { 00285| If (LAnd (And (CFGD, 0x2E), LNot (And (SDTL, 0x20 00286| )))) ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 295 Line | AML source -------------------------------------------------------------------------------- 00292| } 00293| } 00294| 00295| Method (APPT, 0, NotSerialized) | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00296| { 00297| If (LAnd (And (CFGD, One), LNot (And (SDTL, 0x10 00298| )))) ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 314 Line | AML source -------------------------------------------------------------------------------- 00311| { 00312| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00313| GCAP (Local0) 00314| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00315| } 00316| 00317| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 361 Line | AML source -------------------------------------------------------------------------------- 00358| { 00359| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00360| GCAP (Local0) 00361| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00362| } 00363| 00364| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 408 Line | AML source -------------------------------------------------------------------------------- 00405| { 00406| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00407| GCAP (Local0) 00408| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00409| } 00410| 00411| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 455 Line | AML source -------------------------------------------------------------------------------- 00452| { 00453| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00454| GCAP (Local0) 00455| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00456| } 00457| 00458| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 502 Line | AML source -------------------------------------------------------------------------------- 00499| { 00500| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00501| GCAP (Local0) 00502| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00503| } 00504| 00505| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 549 Line | AML source -------------------------------------------------------------------------------- 00546| { 00547| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00548| GCAP (Local0) 00549| Return (Local0) | ^ | Warning 3104: Reserved method should not return a value (_PDC) 00550| } 00551| 00552| Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. Table SSDT (3) reassembly: Found 0 errors, 8 warnings, 7 remarks. Checking ACPI table SSDT (#4) FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 231 Line | AML source -------------------------------------------------------------------------------- 00228| Return (\_SB.PCI0.GFX0.DD01._ADR ()) 00229| } 00230| 00231| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00232| { 00233| } 00234| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_NO_RETURN_VAL: Test 1, Assembler warning in line 278 Line | AML source -------------------------------------------------------------------------------- 00275| 00276| Method (_BCM, 1, NotSerialized) // _BCM: Brightness Control Method 00277| { 00278| Return (\_SB.PCI0.GFX0.DD02._BCM (Arg0)) | ^ | Warning 3104: Reserved method should not return a value (_BCM) 00279| } 00280| } 00281| ================================================================================ ADVICE: (for Warning #3104, ASL_MSG_RESERVED_NO_RETURN_VAL): A reserved method returned a value however it is not expected to return anything, so this does not conform to the expected behaviour. The kernel will most probably ignore the return value, so this is not going to produce any run time errors. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 289 Line | AML source -------------------------------------------------------------------------------- 00286| Return (\_SB.PCI0.GFX0.DD03._ADR ()) 00287| } 00288| 00289| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00290| { 00291| } 00292| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 310 Line | AML source -------------------------------------------------------------------------------- 00307| Return (\_SB.PCI0.GFX0.DD04._ADR ()) 00308| } 00309| 00310| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00311| { 00312| } 00313| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 331 Line | AML source -------------------------------------------------------------------------------- 00328| Return (\_SB.PCI0.GFX0.DD05._ADR ()) 00329| } 00330| 00331| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00332| { 00333| } 00334| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 352 Line | AML source -------------------------------------------------------------------------------- 00349| Return (\_SB.PCI0.GFX0.DD06._ADR ()) 00350| } 00351| 00352| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00353| { 00354| } 00355| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 373 Line | AML source -------------------------------------------------------------------------------- 00370| Return (\_SB.PCI0.GFX0.DD07._ADR ()) 00371| } 00372| 00373| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00374| { 00375| } 00376| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. FAILED [MEDIUM] AMLAsmASL_MSG_RESERVED_RETURN_VALUE: Test 1, Assembler warning in line 394 Line | AML source -------------------------------------------------------------------------------- 00391| Return (\_SB.PCI0.GFX0.DD08._ADR ()) 00392| } 00393| 00394| Method (_DCS, 0, NotSerialized) // _DCS: Display Current Status | ^ | Warning 3107: Reserved method must return a value (Integer required for _DCS) 00395| { 00396| } 00397| ================================================================================ ADVICE: (for Warning #3107, ASL_MSG_RESERVED_RETURN_VALUE): A reserved method was expected to return a value, however, it does not. This is unexpected behaviour that does not conform the the ACPI specification. Table SSDT (4) reassembly: Found 0 errors, 8 warnings, 0 remarks. Checking ACPI table SSDT (#5) FAILED [HIGH] AMLAsmASL_MSG_NAME_EXISTS: Test 1, Assembler error in line 42 Line | AML source -------------------------------------------------------------------------------- 00039| */ 00040| External (_SB_.PCI0.GFX0.IDAB, MethodObj) // Warning: Unresolved method, guessing 0 arguments 00041| 00042| External (_SB_.PCI0.GFX0, DeviceObj) | ^ | Error 6074: Name already exists in scope (_SB_.PCI0.GFX0) 00043| External (_SB_.PCI0.GFX0.AINT, MethodObj) // 2 Arguments 00044| External (_SB_.PCI0.LPCB.H_EC.LSTE, FieldUnitObj) 00045| External (_SB_.PCI0.LPCB.H_EC.OPST, FieldUnitObj) ================================================================================ ADVICE: (for Error #6074, ASL_MSG_NAME_EXISTS): The name already exists in this scope. The compiler will continue to process it. FAILED [HIGH] AMLAsmASL_MSG_SCOPE_TYPE: Test 1, Assembler error in line 106 Line | AML source -------------------------------------------------------------------------------- 00103| } 00104| } 00105| 00106| Scope (\_SB.PCI0.GFX0) | ^ | Error 6117: Existing object has invalid type for Scope operator (\_SB.PCI0.GFX0 [Untyped]) 00107| { 00108| OperationRegion (APXM, SystemMemory, AMDA, 0x00010400) 00109| Field (APXM, AnyAcc, NoLock, Preserve) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 233 Line | AML source -------------------------------------------------------------------------------- 00230| 00231| If (LEqual (Arg0, 0x02)) 00232| { 00233| CreateWordField (Arg1, Zero, FN2S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATPX]) 00234| CreateByteField (Arg1, 0x02, DGPR) 00235| If (LEqual (DGPR, Zero)) 00236| { ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 250 Line | AML source -------------------------------------------------------------------------------- 00247| 00248| If (LEqual (Arg0, 0x03)) 00249| { 00250| CreateWordField (Arg1, Zero, FN3S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATPX]) 00251| CreateWordField (Arg1, 0x02, SDMG) 00252| If (LEqual (SDMG, Zero)) 00253| { ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 267 Line | AML source -------------------------------------------------------------------------------- 00264| 00265| If (LEqual (Arg0, 0x04)) 00266| { 00267| CreateWordField (Arg1, Zero, FN4S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATPX]) 00268| CreateWordField (Arg1, 0x02, SIMG) 00269| If (LEqual (SIMG, Zero)) 00270| { ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 284 Line | AML source -------------------------------------------------------------------------------- 00281| 00282| If (LEqual (Arg0, 0x05)) 00283| { 00284| CreateWordField (Arg1, Zero, FN5S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATPX]) 00285| CreateWordField (Arg1, 0x02, TGFX) 00286| Store (TGFX, TGXA) /* \_SB_.PCI0.GFX0.TGXA */ 00287| Store (One, GSTP) /* \_SB_.PCI0.GFX0.GSTP */ ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 293 Line | AML source -------------------------------------------------------------------------------- 00290| 00291| If (LEqual (Arg0, 0x06)) 00292| { 00293| CreateWordField (Arg1, Zero, FN6S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATPX]) 00294| CreateWordField (Arg1, 0x02, AGFX) 00295| Store (AGFX, AGXA) /* \_SB_.PCI0.GFX0.AGXA */ 00296| Store (Zero, GSTP) /* \_SB_.PCI0.GFX0.GSTP */ ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 491 Line | AML source -------------------------------------------------------------------------------- 00488| }) 00489| CreateWordField (TMP2, Zero, F2SS) 00490| CreateDWordField (TMP2, 0x02, F2PR) 00491| CreateByteField (TMP2, 0x06, F2EM) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00492| CreateByteField (TMP2, 0x07, F2TG) 00493| CreateByteField (TMP2, 0x08, F2SI) 00494| CreateByteField (TMP2, 0x09, F2FG) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 492 Line | AML source -------------------------------------------------------------------------------- 00489| CreateWordField (TMP2, Zero, F2SS) 00490| CreateDWordField (TMP2, 0x02, F2PR) 00491| CreateByteField (TMP2, 0x06, F2EM) 00492| CreateByteField (TMP2, 0x07, F2TG) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00493| CreateByteField (TMP2, 0x08, F2SI) 00494| CreateByteField (TMP2, 0x09, F2FG) 00495| CreateByteField (TMP2, 0x0A, F2FI) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 493 Line | AML source -------------------------------------------------------------------------------- 00490| CreateDWordField (TMP2, 0x02, F2PR) 00491| CreateByteField (TMP2, 0x06, F2EM) 00492| CreateByteField (TMP2, 0x07, F2TG) 00493| CreateByteField (TMP2, 0x08, F2SI) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00494| CreateByteField (TMP2, 0x09, F2FG) 00495| CreateByteField (TMP2, 0x0A, F2FI) 00496| CreateByteField (TMP2, 0x0B, F2SP) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 494 Line | AML source -------------------------------------------------------------------------------- 00491| CreateByteField (TMP2, 0x06, F2EM) 00492| CreateByteField (TMP2, 0x07, F2TG) 00493| CreateByteField (TMP2, 0x08, F2SI) 00494| CreateByteField (TMP2, 0x09, F2FG) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00495| CreateByteField (TMP2, 0x0A, F2FI) 00496| CreateByteField (TMP2, 0x0B, F2SP) 00497| Store (0x0B, F2SS) /* \_SB_.PCI0.GFX0.ATIF.F2SS */ ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 495 Line | AML source -------------------------------------------------------------------------------- 00492| CreateByteField (TMP2, 0x07, F2TG) 00493| CreateByteField (TMP2, 0x08, F2SI) 00494| CreateByteField (TMP2, 0x09, F2FG) 00495| CreateByteField (TMP2, 0x0A, F2FI) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00496| CreateByteField (TMP2, 0x0B, F2SP) 00497| Store (0x0B, F2SS) /* \_SB_.PCI0.GFX0.ATIF.F2SS */ 00498| Name (STS2, Zero) ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 496 Line | AML source -------------------------------------------------------------------------------- 00493| CreateByteField (TMP2, 0x08, F2SI) 00494| CreateByteField (TMP2, 0x09, F2FG) 00495| CreateByteField (TMP2, 0x0A, F2FI) 00496| CreateByteField (TMP2, 0x0B, F2SP) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00497| Store (0x0B, F2SS) /* \_SB_.PCI0.GFX0.ATIF.F2SS */ 00498| Name (STS2, Zero) 00499| Or (DSWR, STS2, STS2) /* \_SB_.PCI0.GFX0.ATIF.STS2 */ ================================================================================ FAILED [LOW] AMLAsmASL_MSG_NOT_REFERENCED: Test 1, Assembler remark in line 515 Line | AML source -------------------------------------------------------------------------------- 00512| }) 00513| CreateWordField (TMP3, Zero, F3SS) 00514| CreateWordField (TMP3, 0x02, F3SD) 00515| CreateWordField (Arg1, Zero, AI3S) | ^ | Remark 2089: Object is not referenced (Name is within method [ATIF]) 00516| CreateWordField (Arg1, 0x02, SLDS) 00517| CreateWordField (Arg1, 0x04, CODS) 00518| Store (SLDS, CACD) /* \_SB_.PCI0.GFX0.CACD */ ================================================================================ FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 738 Line | AML source -------------------------------------------------------------------------------- 00735| Method (HGAS, 0, NotSerialized) 00736| { 00737| Store (One, \_SB.PCI0.GFX0.PXGS) 00738| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6010: Internal compiler error (could not map type) 00739| } 00740| 00741| Method (HBRT, 1, Serialized) ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 738 Line | AML source -------------------------------------------------------------------------------- 00735| Method (HGAS, 0, NotSerialized) 00736| { 00737| Store (One, \_SB.PCI0.GFX0.PXGS) 00738| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00739| } 00740| 00741| Method (HBRT, 1, Serialized) ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 777 Line | AML source -------------------------------------------------------------------------------- 00774| Increment (\_SB.PCI0.GFX0.EXPM) 00775| } 00776| 00777| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6010: Internal compiler error (could not map type) 00778| } 00779| } 00780| } ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 777 Line | AML source -------------------------------------------------------------------------------- 00774| Increment (\_SB.PCI0.GFX0.EXPM) 00775| } 00776| 00777| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00778| } 00779| } 00780| } ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [LOW] AMLAsmASL_MSG_COMPILER_RESERVED: Test 1, Assembler remark in line 784 Line | AML source -------------------------------------------------------------------------------- 00781| 00782| Method (HNOT, 1, Serialized) 00783| { 00784| Name (_T_0, Zero) // _T_x: Emitted by ASL Compiler | ^ | Remark 2011: Use of compiler reserved name (_T_0) 00785| Store (ToInteger (Arg0), _T_0) /* \HNOT._T_0 */ 00786| If (LEqual (_T_0, One)) 00787| { ================================================================================ ADVICE: (for Remark #2011, ASL_MSG_COMPILER_RESERVED): This normally occurs when disassembled code is being compiled and it contains compiler-emitted names of the form '_T_x'. This is just a remark generated by the compiler and can normally be ignored. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 794 Line | AML source -------------------------------------------------------------------------------- 00791| { 00792| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00793| { 00794| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00795| } 00796| 00797| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 794 Line | AML source -------------------------------------------------------------------------------- 00791| { 00792| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00793| { 00794| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00795| } 00796| 00797| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 805 Line | AML source -------------------------------------------------------------------------------- 00802| Else 00803| { 00804| Store (One, \_SB.PCI0.GFX0.DSWR) 00805| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6010: Internal compiler error (could not map type) 00806| } 00807| } 00808| } ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 805 Line | AML source -------------------------------------------------------------------------------- 00802| Else 00803| { 00804| Store (One, \_SB.PCI0.GFX0.DSWR) 00805| Notify (\_SB.PCI0.GFX0, 0x81) // Information Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00806| } 00807| } 00808| } ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 817 Line | AML source -------------------------------------------------------------------------------- 00814| { 00815| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00816| { 00817| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00818| } 00819| 00820| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 817 Line | AML source -------------------------------------------------------------------------------- 00814| { 00815| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00816| { 00817| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00818| } 00819| 00820| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 827 Line | AML source -------------------------------------------------------------------------------- 00824| } 00825| Else 00826| { 00827| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00828| } 00829| } 00830| Else ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 827 Line | AML source -------------------------------------------------------------------------------- 00824| } 00825| Else 00826| { 00827| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00828| } 00829| } 00830| Else ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 838 Line | AML source -------------------------------------------------------------------------------- 00835| { 00836| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00837| { 00838| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00839| } 00840| 00841| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 838 Line | AML source -------------------------------------------------------------------------------- 00835| { 00836| If (LEqual (\_SB.PCI0.GFX0.AGXA, Zero)) 00837| { 00838| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00839| } 00840| 00841| If (LEqual (\_SB.PCI0.GFX0.AGXA, One)) ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 848 Line | AML source -------------------------------------------------------------------------------- 00845| } 00846| Else 00847| { 00848| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00849| } 00850| } 00851| Else ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 848 Line | AML source -------------------------------------------------------------------------------- 00845| } 00846| Else 00847| { 00848| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00849| } 00850| } 00851| Else ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. FAILED [HIGH] AMLAsmASL_MSG_COMPILER_INTERNAL: Test 1, Assembler error in line 853 Line | AML source -------------------------------------------------------------------------------- 00850| } 00851| Else 00852| { 00853| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6010: Internal compiler error (could not map type) 00854| } 00855| } 00856| } ================================================================================ ADVICE: (for Error #6010, ASL_MSG_COMPILER_INTERNAL): An error occurred inside the compiler. FAILED [HIGH] AMLAsmASL_MSG_INVALID_TYPE: Test 1, Assembler error in line 853 Line | AML source -------------------------------------------------------------------------------- 00850| } 00851| Else 00852| { 00853| Notify (\_SB.PCI0.GFX0, 0x80) // Status Change | ^ | Error 6058: Invalid type ([Reference] found, Notify operator requires [Device|Processor|Thermal]) 00854| } 00855| } 00856| } ================================================================================ ADVICE: (for Error #6058, ASL_MSG_INVALID_TYPE): An invalid type was used. A different type was expected to be used. Table SSDT (5) reassembly: Found 20 errors, 0 warnings, 13 remarks. ================================================================================ 0 passed, 84 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ pcc: Processor Clocking Control (PCC) test. -------------------------------------------------------------------------------- Test 1 of 1: Processor Clocking Control (PCC) test. This test checks the sanity of the Processor Clocking Control as found on some HP ProLiant machines. Most computers do not use this interface to control the CPU clock frequency, so this test will be skipped. This machine does not use Processor Clocking Control (PCC). ================================================================================ 0 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 1 info only. ================================================================================ osilinux: Disassemble DSDT to check for _OSI("Linux"). -------------------------------------------------------------------------------- Test 1 of 1: Disassemble DSDT to check for _OSI("Linux"). This is not strictly a failure mode, it just alerts one that this has been defined in the DSDT and probably should be avoided since the Linux ACPI driver matches onto the Windows _OSI strings { If (_OSI ("Linux")) { Store (0x03E8, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001")) { Store (0x07D1, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001 SP3")) { Store (0x07D2, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001 SP4")) { Store (0x07D2, OSYS) /* \OSYS */ } If (_OSI ("Windows 2001.1")) { Store (0x07D3, OSYS) /* \OSYS */ } If (_OSI ("Windows 2006")) { Store (0x07D6, OSYS) /* \OSYS */ } If (_OSI ("Windows 2009")) { Store (0x07D9, OSYS) /* \OSYS */ } If (_OSI ("Windows 2012")) { Store (0x07DC, OSYS) /* \OSYS */ } Store (OSYS, OSTP) /* \OSTP */ Store (OSCM, SSMP) /* \SSMP */ } WARNING: Test 1, DSDT implements a deprecated _OSI("Linux") test. ================================================================================ 0 passed, 0 failed, 1 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ method: ACPI DSDT Method Semantic tests. -------------------------------------------------------------------------------- Test 1 of 169: Test Method Names. Found 1793 Objects PASSED: Test 1, Method names contain legal characters. Test 2 of 169: Test _AEI. SKIPPED: Test 2, Skipping test for non-existant object _AEI. Test 3 of 169: Test _EVT (Event Method). SKIPPED: Test 3, Skipping test for non-existant object _EVT. Test 4 of 169: Test _PIC (Inform AML of Interrupt Model). PASSED: Test 4, \_PIC returned no values as expected. PASSED: Test 4, \_PIC returned no values as expected. PASSED: Test 4, \_PIC returned no values as expected. Test 5 of 169: Test _CID (Compatible ID). PASSED: Test 5, \_SB_.PCI0._CID returned an integer 0x030ad041 (EISA ID PNP0A03). PASSED: Test 5, \_SB_.PCI0.LPCB.CWDT._CID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2K._CID returned an integer 0x0303d041 (EISA ID PNP0303). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x130fd041 (EISA ID PNP0F13). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x0e0fd041 (EISA ID PNP0F0E). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x030fd041 (EISA ID PNP0F03). PASSED: Test 5, \_SB_.PCI0.ITPM._CID returned an integer 0x310cd041 (EISA ID PNP0C31). PASSED: Test 5, \_SB_.TPM_._CID returned an integer 0x310cd041 (EISA ID PNP0C31). Test 6 of 169: Test _DDN (DOS Device Name). SKIPPED: Test 6, Skipping test for non-existant object _DDN. Test 7 of 169: Test _HID (Hardware ID). PASSED: Test 7, \_SB_.PCI0._HID returned an integer 0x080ad041 (EISA ID PNP0A08). PASSED: Test 7, \_SB_.PCI0.TPMX._HID returned an integer 0x010cd041 (EISA ID PNP0C01). PASSED: Test 7, \_SB_.PCI0.LPCB.DMAC._HID returned an integer 0x0002d041 (EISA ID PNP0200). PASSED: Test 7, \_SB_.PCI0.LPCB.FWHD._HID returned an integer 0x0008d425 (EISA ID INT0800). PASSED: Test 7, \_SB_.PCI0.LPCB.HPET._HID returned an integer 0x0301d041 (EISA ID PNP0103). PASSED: Test 7, \_SB_.PCI0.LPCB.IPIC._HID returned an integer 0x0000d041 (EISA ID PNP0000). PASSED: Test 7, \_SB_.PCI0.LPCB.LDRC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.LPCB.RTC_._HID returned an integer 0x000bd041 (EISA ID PNP0B00). PASSED: Test 7, \_SB_.PCI0.LPCB.TIMR._HID returned an integer 0x0001d041 (EISA ID PNP0100). PASSED: Test 7, \_SB_.PCI0.LPCB.CWDT._HID returned an integer 0x0d3fd425 (EISA ID INT3F0D). PASSED: Test 7, \_SB_.PCI0.LPCB.H_EC._HID returned an integer 0x090cd041 (EISA ID PNP0C09). PASSED: Test 7, \_SB_.PCI0.LPCB.H_EC.ALSD._HID returned a string 'ACPI0008' as expected. PASSED: Test 7, \_SB_.PCI0.LPCB.PS2K._HID returned a string 'MSF0001' as expected. PASSED: Test 7, \_SB_.PCI0.LPCB.PS2M._HID returned an integer 0x000b8416 (EISA ID ETD0B00). PASSED: Test 7, \_SB_.PCI0.LPCB.RMSC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.LPCB.COPR._HID returned an integer 0x040cd041 (EISA ID PNP0C04). PASSED: Test 7, \_SB_.PCI0.PDRC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.ITPM._HID returned a string 'INTC0102' as expected. PASSED: Test 7, \_SB_.PCI0.AMW0._HID returned a string 'PNP0C14' as expected. PASSED: Test 7, \_SB_.LNKA._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKB._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKC._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKD._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKE._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKF._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKG._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKH._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.ADP1._HID returned a string 'ACPI0003' as expected. PASSED: Test 7, \_SB_.BAT1._HID returned an integer 0x0a0cd041 (EISA ID PNP0C0A). PASSED: Test 7, \_SB_.LID0._HID returned an integer 0x0d0cd041 (EISA ID PNP0C0D). PASSED: Test 7, \_SB_.PWRB._HID returned an integer 0x0c0cd041 (EISA ID PNP0C0C). PASSED: Test 7, \_SB_.SAPM._HID returned a string 'SAM0714' as expected. PASSED: Test 7, \_SB_.MEM2._HID returned an integer 0x010cd041 (EISA ID PNP0C01). PASSED: Test 7, \_SB_.TPM_._HID returned an integer 0x0201d824 (EISA ID IFX0102). PASSED: Test 7, \_TZ_.FAN0._HID returned an integer 0x0b0cd041 (EISA ID PNP0C0B). PASSED: Test 7, \_TZ_.FAN1._HID returned an integer 0x0b0cd041 (EISA ID PNP0C0B). Test 8 of 169: Test _HRV (Hardware Revision Number). SKIPPED: Test 8, Skipping test for non-existant object _HRV. Test 9 of 169: Test _PLD (Physical Device Location). PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR11._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR12._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR13._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR14._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR15._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR16._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR17._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR18._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR11._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR12._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR13._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR14._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR14.WCAM._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR15._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR16._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP1._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP2._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP3._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP4._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP1._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP2._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP3._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP4._PLD correctly returned a sane looking package. Test 10 of 169: Test _SUB (Subsystem ID). SKIPPED: Test 10, Skipping test for non-existant object _SUB. Test 11 of 169: Test _SUN (Slot User Number). SKIPPED: Test 11, Skipping test for non-existant object _SUN. Test 12 of 169: Test _STR (String). PASSED: Test 12, \_SB_.PCI0.ITPM._STR correctly returned a buffer of 30 elements. PASSED: Test 12, \_SB_.TPM_._STR correctly returned a buffer of 30 elements. Test 13 of 169: Test _UID (Unique ID). PASSED: Test 13, \_SB_.PCI0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.PCI0.TPMX._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.LPCB.HPET._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.PCI0.LPCB.LDRC._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.PCI0.LPCB.H_EC._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.LPCB.RMSC._UID correctly returned sane looking value 0x00000010. PASSED: Test 13, \_SB_.PCI0.PDRC._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.AMW0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.LNKA._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.LNKB._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.LNKC._UID correctly returned sane looking value 0x00000003. PASSED: Test 13, \_SB_.LNKD._UID correctly returned sane looking value 0x00000004. PASSED: Test 13, \_SB_.LNKE._UID correctly returned sane looking value 0x00000005. PASSED: Test 13, \_SB_.LNKF._UID correctly returned sane looking value 0x00000006. PASSED: Test 13, \_SB_.LNKG._UID correctly returned sane looking value 0x00000007. PASSED: Test 13, \_SB_.LNKH._UID correctly returned sane looking value 0x00000008. PASSED: Test 13, \_SB_.BAT1._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.SAPM._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.MEM2._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.TPM_._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_TZ_.FAN0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_TZ_.FAN1._UID correctly returned sane looking value 0x00000001. Test 14 of 169: Test _CDM (Clock Domain). SKIPPED: Test 14, Skipping test for non-existant object _CDM. Test 15 of 169: Test _CRS (Current Resource Settings). PASSED: Test 15, \_SB_.PCI0._CRS (WORD Address Space Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.TPMX._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.DMAC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.FWHD._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.HPET._CRS (End Tag Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.IPIC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.LDRC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.RTC_._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.TIMR._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.CWDT._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.H_EC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.PS2K._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.PS2M._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.RMSC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.COPR._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.PDRC._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.ITPM._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKA._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKB._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKC._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKD._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKE._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKF._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKG._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKH._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.MEM2._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.TPM_._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. Test 16 of 169: Test _DSD (Device Specific Data). SKIPPED: Test 16, Skipping test for non-existant object _DSD. Test 17 of 169: Test _DIS (Disable). PASSED: Test 17, \_SB_.LNKA._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKB._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKC._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKD._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKE._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKF._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKG._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKH._DIS returned no values as expected. Test 18 of 169: Test _DMA (Direct Memory Access). SKIPPED: Test 18, Skipping test for non-existant object _DMA. Test 19 of 169: Test _FIX (Fixed Register Resource Provider). SKIPPED: Test 19, Skipping test for non-existant object _FIX. Test 20 of 169: Test _GSB (Global System Interrupt Base). SKIPPED: Test 20, Skipping test for non-existant object _GSB. Test 21 of 169: Test _HPP (Hot Plug Parameters). SKIPPED: Test 21, Skipping test for non-existant object _HPP. Test 22 of 169: Test _PRS (Possible Resource Settings). PASSED: Test 22, \_SB_.PCI0.LPCB.PS2K._PRS (Start Dependent Functions Descriptor) looks sane. PASSED: Test 22, \_SB_.PCI0.LPCB.PS2M._PRS (Start Dependent Functions Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKA._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKB._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKC._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKD._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKE._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKF._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKG._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKH._PRS (IRQ Descriptor) looks sane. Test 23 of 169: Test _PXM (Proximity). SKIPPED: Test 23, Skipping test for non-existant object _PXM. Test 24 of 169: Test _CCA (Cache Coherency Attribute). SKIPPED: Test 24, Skipping test for non-existant object _CCA. Test 25 of 169: Test _EDL (Eject Device List). SKIPPED: Test 25, Skipping test for non-existant object _EDL. Test 26 of 169: Test _EJD (Ejection Dependent Device). SKIPPED: Test 26, Skipping test for non-existant object _EJD. Test 27 of 169: Test _EJ0 (Eject). SKIPPED: Test 27, Skipping test for non-existant object _EJ0. Test 28 of 169: Test _EJ1 (Eject). SKIPPED: Test 28, Skipping test for non-existant object _EJ1. Test 29 of 169: Test _EJ2 (Eject). SKIPPED: Test 29, Skipping test for non-existant object _EJ2. Test 30 of 169: Test _EJ3 (Eject). SKIPPED: Test 30, Skipping test for non-existant object _EJ3. Test 31 of 169: Test _EJ4 (Eject). SKIPPED: Test 31, Skipping test for non-existant object _EJ4. Test 32 of 169: Test _LCK (Lock). SKIPPED: Test 32, Skipping test for non-existant object _LCK. Test 33 of 169: Test _RMV (Remove). SKIPPED: Test 33, Skipping test for non-existant object _RMV. Test 34 of 169: Test _STA (Status). PASSED: Test 34, \_SB_.PCI0.TPMX._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.HPET._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.PCI0.LPCB.CWDT._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.H_EC.ALSD._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.PCI0.LPCB.PS2K._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.PS2M._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.PEG0.PEGP._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.ITPM._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.LNKA._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKB._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKC._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKD._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKE._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKF._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKG._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKH._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.ADP1._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.BAT1._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.SAPM._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.MEM2._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.TPM_._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_TZ_.FN00._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_TZ_.FN01._STA correctly returned sane looking value 0x00000000. Test 35 of 169: Test _BDN (BIOS Dock Name). SKIPPED: Test 35, Skipping test for non-existant object _BDN. Test 36 of 169: Test _BBN (Base Bus Number). PASSED: Test 36, \_SB_.PCI0._BBN correctly returned an integer. Test 37 of 169: Test _DCK (Dock). SKIPPED: Test 37, Skipping test for non-existant object _DCK. Test 38 of 169: Test _INI (Initialize). PASSED: Test 38, \_SB_.PCI0.PEG0.PEGP._INI returned no values as expected. PASSED: Test 38, \_SB_.PCI0._INI returned no values as expected. Test 39 of 169: Test _GLK (Global Lock). SKIPPED: Test 39, Skipping test for non-existant object _GLK. Test 40 of 169: Test _SEG (Segment). SKIPPED: Test 40, Skipping test for non-existant object _SEG. Test 41 of 169: Test _OFF (Set resource off). PASSED: Test 41, \_SB_.PCI0.PEG0.PEGP._OFF returned no values as expected. PASSED: Test 41, \_TZ_.FN00._OFF returned no values as expected. PASSED: Test 41, \_TZ_.FN01._OFF returned no values as expected. Test 42 of 169: Test _ON (Set resource on). SKIPPED: Test 42, Skipping test for non-existant object _ON. Test 43 of 169: Test _DSW (Device Sleep Wake). SKIPPED: Test 43, Skipping test for non-existant object _DSW. Test 44 of 169: Test _IRC (In Rush Current). SKIPPED: Test 44, Skipping test for non-existant object _IRC. Test 45 of 169: Test _PRE (Power Resources for Enumeration). SKIPPED: Test 45, Skipping test for non-existant object _PRE. Test 46 of 169: Test _PR0 (Power Resources for D0). PASSED: Test 46, \_TZ_.FAN0._PR0 correctly returned a sane looking package. PASSED: Test 46, \_TZ_.FAN1._PR0 correctly returned a sane looking package. Test 47 of 169: Test _PR1 (Power Resources for D1). SKIPPED: Test 47, Skipping test for non-existant object _PR1. Test 48 of 169: Test _PR2 (Power Resources for D2). SKIPPED: Test 48, Skipping test for non-existant object _PR2. Test 49 of 169: Test _PR3 (Power Resources for D3). SKIPPED: Test 49, Skipping test for non-existant object _PR3. Test 50 of 169: Test _PS0 (Power State 0). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method _PS0 WARNING: Test 50, Detected an infinite loop when evaluating method '\_SB_.PCI0.LPCB.PS2K._PS0'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 50, \_SB_.PCI0.LPCB.PS2M._PS0 returned no values as expected. Test 51 of 169: Test _PS1 (Power State 1). SKIPPED: Test 51, Skipping test for non-existant object _PS1. Test 52 of 169: Test _PS2 (Power State 2). SKIPPED: Test 52, Skipping test for non-existant object _PS2. Test 53 of 169: Test _PS3 (Power State 3). PASSED: Test 53, \_SB_.PCI0.LPCB.PS2K._PS3 returned no values as expected. PASSED: Test 53, \_SB_.PCI0.LPCB.PS2M._PS3 returned no values as expected. Test 54 of 169: Test _PSC (Power State Current). SKIPPED: Test 54, Skipping test for non-existant object _PSC. Test 55 of 169: Test _PSE (Power State for Enumeration). SKIPPED: Test 55, Skipping test for non-existant object _PSE. Test 56 of 169: Test _PSW (Power State Wake). PASSED: Test 56, \_SB_.PCI0.EHC1._PSW returned no values as expected. PASSED: Test 56, \_SB_.PCI0.EHC2._PSW returned no values as expected. Test 57 of 169: Test _S1D (S1 Device State). SKIPPED: Test 57, Skipping test for non-existant object _S1D. Test 58 of 169: Test _S2D (S2 Device State). SKIPPED: Test 58, Skipping test for non-existant object _S2D. Test 59 of 169: Test _S3D (S3 Device State). PASSED: Test 59, \_SB_.PCI0.EHC1._S3D correctly returned an integer. PASSED: Test 59, \_SB_.PCI0.EHC2._S3D correctly returned an integer. PASSED: Test 59, \_SB_.PCI0.XHC_._S3D correctly returned an integer. Test 60 of 169: Test _S4D (S4 Device State). PASSED: Test 60, \_SB_.PCI0.EHC1._S4D correctly returned an integer. PASSED: Test 60, \_SB_.PCI0.EHC2._S4D correctly returned an integer. PASSED: Test 60, \_SB_.PCI0.XHC_._S4D correctly returned an integer. Test 61 of 169: Test _S0W (S0 Device Wake State). SKIPPED: Test 61, Skipping test for non-existant object _S0W. Test 62 of 169: Test _S1W (S1 Device Wake State). SKIPPED: Test 62, Skipping test for non-existant object _S1W. Test 63 of 169: Test _S2W (S2 Device Wake State). SKIPPED: Test 63, Skipping test for non-existant object _S2W. Test 64 of 169: Test _S3W (S3 Device Wake State). SKIPPED: Test 64, Skipping test for non-existant object _S3W. Test 65 of 169: Test _S4W (S4 Device Wake State). SKIPPED: Test 65, Skipping test for non-existant object _S4W. Test 66 of 169: Test _S0_ (S0 System State). \_S0_ PM1a_CNT.SLP_TYP value: 0x00000000 \_S0_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 66, \_S0_ correctly returned a sane looking package. Test 67 of 169: Test _S1_ (S1 System State). SKIPPED: Test 67, Skipping test for non-existant object _S1_. Test 68 of 169: Test _S2_ (S2 System State). SKIPPED: Test 68, Skipping test for non-existant object _S2_. Test 69 of 169: Test _S3_ (S3 System State). \_S3_ PM1a_CNT.SLP_TYP value: 0x00000005 \_S3_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 69, \_S3_ correctly returned a sane looking package. Test 70 of 169: Test _S4_ (S4 System State). \_S4_ PM1a_CNT.SLP_TYP value: 0x00000006 \_S4_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 70, \_S4_ correctly returned a sane looking package. Test 71 of 169: Test _S5_ (S5 System State). \_S5_ PM1a_CNT.SLP_TYP value: 0x00000007 \_S5_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 71, \_S5_ correctly returned a sane looking package. Test 72 of 169: Test _SWS (System Wake Source). SKIPPED: Test 72, Skipping test for non-existant object _SWS. Test 73 of 169: Test _PSS (Performance Supported States). \_PR_.CPU0._PSS values: P-State Freq Power Latency Bus Master (MHz) (mW) (us) Latency (us) 0 2401 45000 10 10 1 2400 45000 10 10 2 2300 42264 10 10 3 2200 40021 10 10 4 2100 37822 10 10 5 2000 35666 10 10 6 1900 33552 10 10 7 1800 31487 10 10 8 1700 29042 10 10 9 1600 27058 10 10 10 1500 25116 10 10 11 1400 23214 10 10 12 1300 21357 10 10 13 1200 19535 10 10 PASSED: Test 73, \_PR_.CPU0._PSS correctly returned a sane looking package. Test 74 of 169: Test _CPC (Continuous Performance Control). SKIPPED: Test 74, Skipping test for non-existant object _CPC. Test 75 of 169: Test _CSD (C State Dependencies). SKIPPED: Test 75, Skipping test for non-existant object _CSD. Test 76 of 169: Test _CST (C States). SKIPPED: Test 76, Skipping test for non-existant object _CST. Test 77 of 169: Test _PCT (Performance Control). PASSED: Test 77, \_PR_.CPU0._PCT correctly returned a sane looking package. Test 78 of 169: Test _PDL (P-State Depth Limit). SKIPPED: Test 78, Skipping test for non-existant object _PDL. Test 79 of 169: Test _PPC (Performance Present Capabilities). PASSED: Test 79, \_PR_.CPU0._PPC correctly returned an integer. Test 80 of 169: Test _PPE (Polling for Platform Error). SKIPPED: Test 80, Skipping test for non-existant object _PPE. Test 81 of 169: Test _TDL (T-State Depth Limit). SKIPPED: Test 81, Skipping test for non-existant object _TDL. Test 82 of 169: Test _TPC (Throttling Present Capabilities). SKIPPED: Test 82, Skipping test for non-existant object _TPC. Test 83 of 169: Test _TSD (Throttling State Dependencies). SKIPPED: Test 83, Skipping test for non-existant object _TSD. Test 84 of 169: Test _TSS (Throttling Supported States). SKIPPED: Test 84, Skipping test for non-existant object _TSS. Test 85 of 169: Test _PUR (Processor Utilization Request). SKIPPED: Test 85, Skipping test for non-existant object _PUR. Test 86 of 169: Test _MSG (Message). SKIPPED: Test 86, Skipping test for non-existant object _MSG. Test 87 of 169: Test _SST (System Status). SKIPPED: Test 87, Skipping test for non-existant object _SST. Test 88 of 169: Test _ALC (Ambient Light Colour Chromaticity). SKIPPED: Test 88, Skipping test for non-existant object _ALC. Test 89 of 169: Test _ALI (Ambient Light Illuminance). PASSED: Test 89, \_SB_.PCI0.LPCB.H_EC.ALSD._ALI correctly returned an integer. Test 90 of 169: Test _ALT (Ambient Light Temperature). SKIPPED: Test 90, Skipping test for non-existant object _ALT. Test 91 of 169: Test _ALP (Ambient Light Polling). SKIPPED: Test 91, Skipping test for non-existant object _ALP. Test 92 of 169: Test _LID (Lid Status). PASSED: Test 92, \_SB_.LID0._LID correctly returned sane looking value 0x00000000. Test 93 of 169: Test _GTF (Get Task File). PASSED: Test 93, \_SB_.PCI0.SAT0.SPT0._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT1._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT3._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT4._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT5._GTF correctly returned a sane looking buffer. Test 94 of 169: Test _GTM (Get Timing Mode). PASSED: Test 94, \_SB_.PCI0.SAT0._GTM correctly returned a sane looking buffer. Test 95 of 169: Test _UPD (User Presence Detect). SKIPPED: Test 95, Skipping test for non-existant object _UPD. Test 96 of 169: Test _UPP (User Presence Polling). SKIPPED: Test 96, Skipping test for non-existant object _UPP. Test 97 of 169: Test _GCP (Get Capabilities). SKIPPED: Test 97, Skipping test for non-existant object _GCP. Test 98 of 169: Test _GRT (Get Real Time). SKIPPED: Test 98, Skipping test for non-existant object _GRT. Test 99 of 169: Test _GWS (Get Wake Status). SKIPPED: Test 99, Skipping test for non-existant object _GWS. Test 100 of 169: Test _STP (Set Expired Timer Wake Policy). SKIPPED: Test 100, Skipping test for non-existant object _STP. Test 101 of 169: Test _STV (Set Timer Value). SKIPPED: Test 101, Skipping test for non-existant object _STV. Test 102 of 169: Test _TIP (Expired Timer Wake Policy). SKIPPED: Test 102, Skipping test for non-existant object _TIP. Test 103 of 169: Test _TIV (Timer Values). SKIPPED: Test 103, Skipping test for non-existant object _TIV. Test 104 of 169: Test _SBS (Smart Battery Subsystem). SKIPPED: Test 104, Skipping test for non-existant object _SBS. Test 105 of 169: Test _BCT (Battery Charge Time). SKIPPED: Test 105, Skipping test for non-existant object _BCT. Test 106 of 169: Test _BIF (Battery Information). PASSED: Test 106, \_SB_.BAT1._BIF correctly returned a sane looking package. Test 107 of 169: Test _BIX (Battery Information Extended). PASSED: Test 107, \_SB_.BAT1._BIX correctly returned a sane looking package. Test 108 of 169: Test _BMA (Battery Measurement Averaging). SKIPPED: Test 108, Skipping test for non-existant object _BMA. Test 109 of 169: Test _BMC (Battery Maintenance Control). SKIPPED: Test 109, Skipping test for non-existant object _BMC. Test 110 of 169: Test _BMD (Battery Maintenance Data). SKIPPED: Test 110, Skipping test for non-existant object _BMD. Test 111 of 169: Test _BMS (Battery Measurement Sampling Time). SKIPPED: Test 111, Skipping test for non-existant object _BMS. Test 112 of 169: Test _BST (Battery Status). PASSED: Test 112, \_SB_.BAT1._BST correctly returned a sane looking package. Test 113 of 169: Test _BTP (Battery Trip Point). PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. Test 114 of 169: Test _BTM (Battery Time). SKIPPED: Test 114, Skipping test for non-existant object _BTM. Test 115 of 169: Test _PCL (Power Consumer List). FAILED [CRITICAL] AETtype: Test 115, Detected error 'Type' when evaluating '\_SB_.ADP1._PCL'. ADVICE: The type of an object is incorrect and does not match the expected type. ACPI will generally abort execution of the AML op-code that causes this error. FAILED [CRITICAL] AETtype: Test 115, Detected error 'Type' when evaluating '\_SB_.BAT1._PCL'. ADVICE: The type of an object is incorrect and does not match the expected type. ACPI will generally abort execution of the AML op-code that causes this error. Test 116 of 169: Test _PIF (Power Source Information). SKIPPED: Test 116, Skipping test for non-existant object _PIF. Test 117 of 169: Test _PSR (Power Source). PASSED: Test 117, \_SB_.ADP1._PSR correctly returned sane looking value 0x00000000. Test 118 of 169: Test _GAI (Get Averaging Level). SKIPPED: Test 118, Skipping test for non-existant object _GAI. Test 119 of 169: Test _GHL (Get Harware Limit). SKIPPED: Test 119, Skipping test for non-existant object _GHL. Test 120 of 169: Test _PMM (Power Meter Measurement). SKIPPED: Test 120, Skipping test for non-existant object _PMM. Test 121 of 169: Test _FIF (Fan Information). SKIPPED: Test 121, Skipping test for non-existant object _FIF. Test 122 of 169: Test _FSL (Fan Set Level). SKIPPED: Test 122, Skipping test for non-existant object _FSL. Test 123 of 169: Test _FST (Fan Status). SKIPPED: Test 123, Skipping test for non-existant object _FST. Test 124 of 169: Test _ACx (Active Cooling). PASSED: Test 124, \_TZ_.TZ00._AC0 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC1 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC2 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC3 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC4 correctly returned a sane looking return type. SKIPPED: Test 124, Skipping test for non-existant object _AC5. SKIPPED: Test 124, Skipping test for non-existant object _AC6. SKIPPED: Test 124, Skipping test for non-existant object _AC7. SKIPPED: Test 124, Skipping test for non-existant object _AC8. SKIPPED: Test 124, Skipping test for non-existant object _AC9. Test 125 of 169: Test _ART (Active Cooling Relationship Table). SKIPPED: Test 125, Skipping test for non-existant object _ART. Test 126 of 169: Test _CRT (Critical Trip Point). PASSED: Test 126, \_TZ_.TZ00._CRT correctly returned a sane looking return type. PASSED: Test 126, \_TZ_.TZ01._CRT correctly returned a sane looking return type. Test 127 of 169: Test _DTI (Device Temperature Indication). SKIPPED: Test 127, Skipping test for non-existant object _DTI. Test 128 of 169: Test _HOT (Hot Temperature). SKIPPED: Test 128, Skipping test for non-existant object _HOT. Test 129 of 169: Test _NTT (Notification Temp Threshold). SKIPPED: Test 129, Skipping test for non-existant object _NTT. Test 130 of 169: Test _PSL (Passive List). PASSED: Test 130, \_TZ_.TZ00._PSL correctly returned a sane looking package. PASSED: Test 130, \_TZ_.TZ01._PSL correctly returned a sane looking package. Test 131 of 169: Test _PSV (Passive Temp). PASSED: Test 131, \_TZ_.TZ00._PSV correctly returned a sane looking return type. PASSED: Test 131, \_TZ_.TZ01._PSV correctly returned a sane looking return type. Test 132 of 169: Test _RTV (Relative Temp Values). SKIPPED: Test 132, Skipping test for non-existant object _RTV. Test 133 of 169: Test _SCP (Set Cooling Policy). SKIPPED: Test 133, Skipping test for non-existant object _DTI. Test 134 of 169: Test _TC1 (Thermal Constant 1). PASSED: Test 134, _TC1 correctly returned sane looking value 0x00000000. PASSED: Test 134, _TC1 correctly returned sane looking value 0x00000000. Test 135 of 169: Test _TC2 (Thermal Constant 2). PASSED: Test 135, _TC1 correctly returned sane looking value 0x00000000. PASSED: Test 135, _TC1 correctly returned sane looking value 0x00000000. Test 136 of 169: Test _TMP (Thermal Zone Current Temp). PASSED: Test 136, \_TZ_.TZ00._TMP correctly returned a sane looking return type. PASSED: Test 136, \_TZ_.TZ01._TMP correctly returned a sane looking return type. Test 137 of 169: Test _TPT (Trip Point Temperature). SKIPPED: Test 137, Skipping test for non-existant object _TPT. Test 138 of 169: Test _TRT (Thermal Relationship Table). SKIPPED: Test 138, Skipping test for non-existant object _TRT. Test 139 of 169: Test _TSP (Thermal Sampling Period). PASSED: Test 139, _TSP correctly returned sane looking value 0.000000 seconds PASSED: Test 139, _TSP correctly returned sane looking value 0.000000 seconds Test 140 of 169: Test _TST (Temperature Sensor Threshold). SKIPPED: Test 140, Skipping test for non-existant object _TST. Test 141 of 169: Test _TZD (Thermal Zone Devices). SKIPPED: Test 141, Skipping test for non-existant object _TZD. Test 142 of 169: Test _TZM (Thermal Zone member). SKIPPED: Test 142, Skipping test for non-existant object _TZM. Test 143 of 169: Test _TZP (Thermal Zone Polling). SKIPPED: Test 143, Skipping test for non-existant object _TZP. Test 144 of 169: Test _PTS (Prepare to Sleep). Test _PTS(1). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(2). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(3). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(4). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(5). PASSED: Test 144, \_PTS returned no values as expected. Test 145 of 169: Test _TTS (Transition to State). SKIPPED: Test 145, Optional control method _TTS does not exist. Test 146 of 169: Test _S0 (System S0 State). SKIPPED: Test 146, Skipping test for non-existant object _S0. Test 147 of 169: Test _S1 (System S1 State). SKIPPED: Test 147, Skipping test for non-existant object _S1. Test 148 of 169: Test _S2 (System S2 State). SKIPPED: Test 148, Skipping test for non-existant object _S2. Test 149 of 169: Test _S3 (System S3 State). SKIPPED: Test 149, Skipping test for non-existant object _S3. Test 150 of 169: Test _S4 (System S4 State). SKIPPED: Test 150, Skipping test for non-existant object _S4. Test 151 of 169: Test _S5 (System S5 State). SKIPPED: Test 151, Skipping test for non-existant object _S5. Test 152 of 169: Test _WAK (System Wake). Test _WAK(1) System Wake, State S1. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(2) System Wake, State S2. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(3) System Wake, State S3. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(4) System Wake, State S4. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(5) System Wake, State S5. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test 153 of 169: Test _ADR (Return Unique ID for Device). PASSED: Test 153, \_SB_.PCI0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.LPCB._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.P0P1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB5._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB6._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB7._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP01.PXSX._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP04.PXSX._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD02._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD03._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD05._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD06._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD07._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD08._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGA._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGH._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.B0D4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD02._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD03._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD05._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD06._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD07._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD08._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR11._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR12._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR13._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR14._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR15._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR16._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR17._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR18._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR11._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR12._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR13._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR14._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR14.WCAM._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR15._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR16._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.HDEF._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT5._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SBUS._ADR correctly returned an integer. Test 154 of 169: Test _BCL (Query List of Brightness Control Levels Supported). Brightness levels for \_SB_.PCI0.PEG0.PEGP.DD02._BCL: Level on full power : 80 Level on battery power: 13 Brightness Levels : 7, 13, 20, 30, 45, 60, 80, 100 PASSED: Test 154, \_SB_.PCI0.PEG0.PEGP.DD02._BCL returned a sane package of 10 integers. Brightness levels for \_SB_.PCI0.GFX0.DD02._BCL: Level on full power : 80 Level on battery power: 13 Brightness Levels : 7, 13, 20, 30, 45, 60, 80, 100 PASSED: Test 154, \_SB_.PCI0.GFX0.DD02._BCL returned a sane package of 10 integers. Test 155 of 169: Test _BCM (Set Brightness Level). FAILED [MEDIUM] MethodShouldReturnNothing: Test 155, \_SB_.PCI0.PEG0.PEGP.DD02._BCM returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 155, \_SB_.PCI0.GFX0.DD02._BCM returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 156 of 169: Test _BQC (Brightness Query Current Level). PASSED: Test 156, \_SB_.PCI0.PEG0.PEGP.DD02._BQC correctly returned an integer. PASSED: Test 156, \_SB_.PCI0.GFX0.DD02._BQC correctly returned an integer. Test 157 of 169: Test _DCS (Return the Status of Output Device). FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD01._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. PASSED: Test 157, \_SB_.PCI0.PEG0.PEGP.DD02._DCS correctly returned an integer. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD03._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD04._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD05._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD06._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD07._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD08._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. PASSED: Test 157, \_SB_.PCI0.GFX0.DD01._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD02._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD03._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD04._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD05._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD06._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD07._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD08._DCS correctly returned an integer. Test 158 of 169: Test _DDC (Return the EDID for this Device). SKIPPED: Test 158, Skipping test for non-existant object _DDC. Test 159 of 169: Test _DSS (Device Set State). PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD01._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD02._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD03._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD04._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD05._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD06._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD07._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD08._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD01._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD02._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD03._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD04._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD05._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD06._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD07._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD08._DSS returned no values as expected. Test 160 of 169: Test _DGS (Query Graphics State). PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD01._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD02._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD03._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD04._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD05._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD06._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD07._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD08._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD01._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD02._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD03._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD04._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD05._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD06._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD07._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD08._DGS correctly returned an integer. Test 161 of 169: Test _DOD (Enumerate All Devices Attached to Display Adapter). Device 0: Instance: 0 Display port attachment: 0 Type of display: 4 (Internal/Integrated Digital Flat Panel) BIOS can detect device: 0 Non-VGA device: 0 Head or pipe ID: 0 PASSED: Test 161, \_SB_.PCI0.PEG0.PEGP._DOD correctly returned a sane looking package. Device 0: Instance: 0 Display port attachment: 0 Type of display: 4 (Internal/Integrated Digital Flat Panel) BIOS can detect device: 0 Non-VGA device: 0 Head or pipe ID: 0 PASSED: Test 161, \_SB_.PCI0.GFX0._DOD correctly returned a sane looking package. Test 162 of 169: Test _DOS (Enable/Disable Output Switching). PASSED: Test 162, \_SB_.PCI0.GFX0._DOS returned no values as expected. Test 163 of 169: Test _GPD (Get POST Device). SKIPPED: Test 163, Skipping test for non-existant object _GPD. Test 164 of 169: Test _ROM (Get ROM Data). SKIPPED: Test 164, Skipping test for non-existant object _ROM. Test 165 of 169: Test _SPD (Set POST Device). SKIPPED: Test 165, Skipping test for non-existant object _SPD. Test 166 of 169: Test _VPO (Video POST Options). SKIPPED: Test 166, Skipping test for non-existant object _VPO. Test 167 of 169: Test _CBA (Configuration Base Address). SKIPPED: Test 167, Skipping test for non-existant object _CBA. Test 168 of 169: Test _IFT (IPMI Interface Type). SKIPPED: Test 168, Skipping test for non-existant object _IFT. Test 169 of 169: Test _SRV (IPMI Interface Revision). SKIPPED: Test 169, Skipping test for non-existant object _SRV. ================================================================================ 362 passed, 11 failed, 1 warning, 0 aborted, 118 skipped, 0 info only. ================================================================================ mcfg: MCFG PCI Express* memory mapped config space test. -------------------------------------------------------------------------------- Test 1 of 2: Validate MCFG table. This test tries to validate the MCFG table by comparing the first 16 bytes in the MMIO mapped config space with the 'traditional' config space of the first PCI device (root bridge). The MCFG data is only trusted if it is marked reserved in the UEFI run-time service memory map Memory Map Layout ----------------- 0x0000000000000000 - 0x000000000009dfff (System RAM) 0x000000000009e000 - 0x000000000009ffff (reserved) 0x0000000000100000 - 0x000000001fffffff (System RAM) 0x0000000020000000 - 0x00000000201fffff (reserved) 0x0000000020200000 - 0x0000000040003fff (System RAM) 0x0000000040004000 - 0x0000000040004fff (reserved) 0x0000000040005000 - 0x00000000c94f6fff (System RAM) 0x00000000c94f7000 - 0x00000000c9976fff (reserved) 0x00000000c9977000 - 0x00000000c9986fff (ACPI Non-volatile Storage) 0x00000000c9987000 - 0x00000000c9fd1fff (ACPI Non-volatile Storage) 0x00000000c9fd2000 - 0x00000000ca7e4fff (reserved) 0x00000000ca7e5000 - 0x00000000ca87ffff (reserved) 0x00000000ca880000 - 0x00000000ca880fff (System RAM) 0x00000000ca881000 - 0x00000000ca8c3fff (ACPI Non-volatile Storage) 0x00000000ca8c4000 - 0x00000000cacdefff (System RAM) 0x00000000cacdf000 - 0x00000000caff3fff (reserved) 0x00000000caff4000 - 0x00000000caffffff (System RAM) 0x00000000cb800000 - 0x00000000cf9fffff (reserved) 0x00000000f8000000 - 0x00000000fbffffff (reserved) 0x00000000fec00000 - 0x00000000fec00fff (reserved) 0x00000000fed00000 - 0x00000000fed03fff (reserved) 0x00000000fed1c000 - 0x00000000fed1ffff (reserved) 0x00000000fee00000 - 0x00000000fee00fff (reserved) 0x00000000ff000000 - 0x00000000ffffffff (reserved) 0x0000000100000000 - 0x000000022f5fffff (System RAM) MCFG table found, size is 16 bytes (excluding header) (1 entries). Configuration Entry #0: Base Address : 0xf8000000 Segment : 0 Start bus : 0 End bus : 63 PASSED: Test 1, MCFG MMIO config space is reserved in memory map table. Test 2 of 2: Validate MCFG PCI config space. PASSED: Test 2, PCI config space verified. ================================================================================ 2 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ fan: Simple fan tests. -------------------------------------------------------------------------------- Test 1 of 2: Test fan status. Test how many fans there are in the system. Check for the current status of the fan(s). PASSED: Test 1, Fan cooling_device0 of type Fan has max cooling state 1 and current cooling state 0. PASSED: Test 1, Fan cooling_device1 of type Fan has max cooling state 1 and current cooling state 0. PASSED: Test 1, Fan cooling_device2 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device3 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device4 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device5 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device6 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device7 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device8 of type Processor has max cooling state 3 and current cooling state 0. PASSED: Test 1, Fan cooling_device9 of type Processor has max cooling state 3 and current cooling state 0. FAILED [MEDIUM] NoFanCurState: Test 1, Fan present but has no cur_state present. Test 2 of 2: Load system, check CPU fan status. Test how many fans there are in the system. Check for the current status of the fan(s). Loading CPUs for 20 seconds to try and get fan speeds to change. Fan cooling_device2 current state did not change from value 0 while CPUs were busy. Fan cooling_device3 current state did not change from value 0 while CPUs were busy. Fan cooling_device4 current state did not change from value 0 while CPUs were busy. Fan cooling_device5 current state did not change from value 0 while CPUs were busy. Fan cooling_device6 current state did not change from value 0 while CPUs were busy. Fan cooling_device7 current state did not change from value 0 while CPUs were busy. Fan cooling_device8 current state did not change from value 0 while CPUs were busy. Fan cooling_device9 current state did not change from value 0 while CPUs were busy. ADVICE: Did not detect any change in the CPU related thermal cooling device states. It could be that the devices are returning static information back to the driver and/or the fan speed is automatically being controlled by firmware using System Management Mode in which case the kernel interfaces being examined may not work anyway. ================================================================================ 10 passed, 1 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ fadt: FADT SCI_EN enabled tests. -------------------------------------------------------------------------------- Test 1 of 2: Test FADT SCI_EN bit is enabled. FADT Preferred PM Profile: 2 (Mobile) FADT is greater than ACPI version 1.0 PASSED: Test 1, SCI_EN bit in PM1a Control Register Block is enabled. Test 2 of 2: Test FADT reset register. PASSED: Test 2, FADT reset register width is 8 bits wide as expected. PASSED: Test 2, FADT register bit offset is 0 as expected. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ dmar: DMA Remapping (VT-d) test. -------------------------------------------------------------------------------- Test 1 of 1: DMA Remapping test. PASSED: Test 1, DMAR ACPI table has passed test. PASSED: Test 1, Found no DMAR errors in kernel log. ================================================================================ 2 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ cstates: Processor C state support test. -------------------------------------------------------------------------------- Test 1 of 1: Test all CPUs C-states. This test checks if all processors have the same number of C-states, if the C-state counter works and if C-state transitions happen. PASSED: Test 1, Processor 0 has reached all C-states: PASSED: Test 1, Processor 1 has reached all C-states: PASSED: Test 1, Processor 1 has the same number of C-states as processor 0 PASSED: Test 1, Processor 2 has reached all C-states: PASSED: Test 1, Processor 2 has the same number of C-states as processor 0 PASSED: Test 1, Processor 3 has reached all C-states: PASSED: Test 1, Processor 3 has the same number of C-states as processor 0 PASSED: Test 1, Processor 4 has reached all C-states: PASSED: Test 1, Processor 4 has the same number of C-states as processor 0 PASSED: Test 1, Processor 5 has reached all C-states: PASSED: Test 1, Processor 5 has the same number of C-states as processor 0 PASSED: Test 1, Processor 6 has reached all C-states: PASSED: Test 1, Processor 6 has the same number of C-states as processor 0 PASSED: Test 1, Processor 7 has reached all C-states: PASSED: Test 1, Processor 7 has the same number of C-states as processor 0 ================================================================================ 15 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ checksum: ACPI table checksum test. -------------------------------------------------------------------------------- Test 1 of 1: ACPI table checksum test. PASSED: Test 1, Table RSDP has correct checksum 0x02. PASSED: Test 1, Table RSDP has correct extended checksum 0x54. PASSED: Test 1, Table XSDT has correct checksum 0x5c PASSED: Test 1, Table DSDT has correct checksum 0x8e PASSED: Test 1, Table FACP has correct checksum 0x9c PASSED: Test 1, Table APIC has correct checksum 0xa7 PASSED: Test 1, Table FPDT has correct checksum 0xb8 PASSED: Test 1, Table MCFG has correct checksum 0x83 PASSED: Test 1, Table MSDM has correct checksum 0x40 PASSED: Test 1, Table HPET has correct checksum 0x90 PASSED: Test 1, Table SSDT has correct checksum 0xce PASSED: Test 1, Table SSDT has correct checksum 0x47 PASSED: Test 1, Table SSDT has correct checksum 0x7f PASSED: Test 1, Table DMAR has correct checksum 0x43 PASSED: Test 1, Table BGRT has correct checksum 0xcc PASSED: Test 1, Table SSDT has correct checksum 0x84 PASSED: Test 1, Table SSDT has correct checksum 0x7e PASSED: Test 1, Table RSDT has correct checksum 0x11 PASSED: Test 1, Table FACP has correct checksum 0x3a ================================================================================ 19 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ autobrightness: Automated LCD brightness test. -------------------------------------------------------------------------------- Test 1 of 2: Test for maximum and actual brightness. PASSED: Test 1, Maximum brightness for intel_backlight is 4882 which is sane. PASSED: Test 1, Actual brightness for intel_backlight is 3174 which is in range 0..4882. Test 2 of 2: Change actual brightness. PASSED: Test 2, Actual brightness matches the brightnesss level for all 4882 levels for backlight intel_backlight. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ apicinstance: Test for single instance of APIC/MADT table. -------------------------------------------------------------------------------- Test 1 of 1: Test for single instance of APIC/MADT table. Found APIC/MADT table APIC @ c9983750, length 0x146 PASSED: Test 1, Found 1 APIC/MADT table(s), as expected. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ acpitables: ACPI table settings sanity tests. -------------------------------------------------------------------------------- Test 1 of 2: Test ACPI tables. PASSED: Test 1, Table APIC passed. Table ECDT not present to check. PASSED: Test 1, Table FACP passed. PASSED: Test 1, Table HPET passed. PASSED: Test 1, Table MCFG passed. PASSED: Test 1, Table RSDT passed. PASSED: Test 1, Table RSDP passed. Table SBST not present to check. PASSED: Test 1, Table XSDT passed. Test 2 of 2: Test ACPI headers. PASSED: Test 2, Table XSDT has valid signature and ID strings. PASSED: Test 2, Table DSDT has valid signature and ID strings. PASSED: Test 2, Table FACP has valid signature and ID strings. PASSED: Test 2, Table APIC has valid signature and ID strings. PASSED: Test 2, Table FPDT has valid signature and ID strings. PASSED: Test 2, Table MCFG has valid signature and ID strings. PASSED: Test 2, Table MSDM has valid signature and ID strings. PASSED: Test 2, Table HPET has valid signature and ID strings. PASSED: Test 2, Table SSDT has valid signature and ID strings. PASSED: Test 2, Table SSDT has valid signature and ID strings. PASSED: Test 2, Table SSDT has valid signature and ID strings. PASSED: Test 2, Table DMAR has valid signature and ID strings. PASSED: Test 2, Table BGRT has valid signature and ID strings. PASSED: Test 2, Table SSDT has valid signature and ID strings. PASSED: Test 2, Table SSDT has valid signature and ID strings. PASSED: Test 2, Table RSDT has valid signature and ID strings. PASSED: Test 2, Table FACP has valid signature and ID strings. ================================================================================ 24 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 626 passed, 165 failed, 14 warnings, 0 aborted, 131 skipped, 11 info only. Test Failure Summary ================================================================================ Critical failures: 2 method: Detected error 'Type' when evaluating '\_SB_.ADP1._PCL'. method: Detected error 'Type' when evaluating '\_SB_.BAT1._PCL'. High failures: 32 klog: HIGH Kernel message: [ 14.737555] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737567] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737570] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737575] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737578] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737583] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) klog: HIGH Kernel message: [ 14.737586] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258) dmicheck: Out of range value 0x00 (range allowed 0x01..0x0b) while accessing entry 'Voltage Probe (Type 26)' @ 0xca60b4c9, field 'Location (bits 0..4)', offset 0x05 dmicheck: Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Voltage Probe (Type 26)' @ 0xca60b4c9, field 'Status (bits 5..7)', offset 0x05 dmicheck: Out of range value 0x00 (range allowed 0x01..0x0f) while accessing entry 'Temperature Probe (Type 28)' @ 0xca60b51b, field 'Location (bits 0..4)', offset 0x05 dmicheck: Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Temperature Probe (Type 28)' @ 0xca60b51b, field 'Status (bits 5..7)', offset 0x05 dmicheck: Out of range value 0x12 (range allowed 0x01..0x09, 0x10..0x11) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b56d, field 'Device Type', offset 0x06, mask 0x1f dmicheck: Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b56d, field 'Status (bits 5..7)', offset 0x06 dmicheck: Out of range value 0x12 (range allowed 0x01..0x09, 0x10..0x11) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b5c0, field 'Device Type', offset 0x06, mask 0x1f dmicheck: Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Cooling Device (Type 27)' @ 0xca60b5c0, field 'Status (bits 5..7)', offset 0x06 dmicheck: Out of range value 0x00 (range allowed 0x01..0x0b) while accessing entry 'Electrical Current Probe (Type 29)' @ 0xca60b606, field 'Location (bits 0..4)', offset 0x05 dmicheck: Out of range value 0x00 (range allowed 0x01..0x06) while accessing entry 'Electrical Current Probe (Type 29)' @ 0xca60b606, field 'Status (bits 5..7)', offset 0x05 syntaxcheck: Assembler error in line 9318 syntaxcheck: Assembler error in line 10935 syntaxcheck: Assembler error in line 244 syntaxcheck: Compilation aborted early due to a parser detected syntax error. syntaxcheck: Assembler error in line 42 syntaxcheck: Assembler error in line 106 syntaxcheck: Assembler error in line 738 syntaxcheck: Assembler error in line 777 syntaxcheck: Assembler error in line 794 syntaxcheck: Assembler error in line 805 syntaxcheck: Assembler error in line 817 syntaxcheck: Assembler error in line 827 syntaxcheck: Assembler error in line 838 syntaxcheck: Assembler error in line 848 syntaxcheck: Assembler error in line 853 Medium failures: 51 klog: MEDIUM Kernel message: [ 1.462470] ACPI: Invalid active2 threshold mtrr: Memory range 0xd0000000 to 0xdfffffff (0000:00:02.0) has incorrect attribute Uncached Write-Back. mtrr: Memory range 0xe0000000 to 0xefffffff (0000:01:00.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf0000000 to 0xf0003fff (0000:03:00.0) has incorrect attribute Uncached Write-Back. mtrr: Memory range 0xf7800000 to 0xf7bfffff (0000:00:02.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7c00000 to 0xf7c00fff (0000:03:00.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7d00000 to 0xf7d01fff (0000:02:00.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7e00000 to 0xf7e3ffff (0000:01:00.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7e40000 to 0xf7e5ffff (0000:01:00.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f00000 to 0xf7f0ffff (0000:00:14.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f10000 to 0xf7f13fff (0000:00:1b.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f15000 to 0xf7f150ff (0000:00:1f.3) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f16000 to 0xf7f167ff (0000:00:1f.2) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f17000 to 0xf7f173ff (0000:00:1d.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f18000 to 0xf7f183ff (0000:00:1a.0) has incorrect attribute Write-Back. mtrr: Memory range 0xf7f1a000 to 0xf7f1a00f (0000:00:16.0) has incorrect attribute Write-Back. aspm: PCIe ASPM setting was not matched. dmicheck: String index 0x05 in table entry 'Base Board Information (Type 2)' @ 0xca60b0f0, field 'Asset Tag', offset 0x08 has a default value 'No Asset Tag' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x02 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Version', offset 0x06 has a default value 'N/A' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x03 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Serial Number', offset 0x07 has a default value 'None' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'Asset Tag', offset 0x08 has a default value 'No Asset Tag' and probably has not been updated by the BIOS vendor. syntaxcheck: Assembler warning in line 2109 syntaxcheck: Assembler warning in line 5851 syntaxcheck: Assembler warning in line 10375 syntaxcheck: Assembler warning in line 61 syntaxcheck: Assembler warning in line 127 syntaxcheck: Assembler warning in line 243 syntaxcheck: Assembler warning in line 314 syntaxcheck: Assembler warning in line 361 syntaxcheck: Assembler warning in line 408 syntaxcheck: Assembler warning in line 455 syntaxcheck: Assembler warning in line 502 syntaxcheck: Assembler warning in line 549 syntaxcheck: Assembler warning in line 231 syntaxcheck: Assembler warning in line 278 syntaxcheck: Assembler warning in line 289 syntaxcheck: Assembler warning in line 310 syntaxcheck: Assembler warning in line 331 syntaxcheck: Assembler warning in line 352 syntaxcheck: Assembler warning in line 373 syntaxcheck: Assembler warning in line 394 method: \_SB_.PCI0.PEG0.PEGP.DD02._BCM returned values, but was expected to return nothing. method: \_SB_.PCI0.GFX0.DD02._BCM returned values, but was expected to return nothing. method: \_SB_.PCI0.PEG0.PEGP.DD01._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD03._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD04._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD05._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD06._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD07._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD08._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. fan: Fan present but has no cur_state present. Low failures: 70 klog: LOW Kernel message: [ 14.737590] lpc_ich: Resource conflict(s) found affecting gpio_ich klog: LOW Kernel message: [ 14.870084] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS dmicheck: String index 0x05 in table entry 'Chassis Information (Type 3)' @ 0xca60b16f, field 'SKU Number', offset 0x15 has a default value 'To be filled by O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b4f8, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b54a, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b59d, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b5e3, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'Management Device Component (Type 35)' @ 0xca60b633, field 'Description', offset 0x04 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x01 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Location', offset 0x05 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x02 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Device Name', offset 0x06 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x03 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Manufacturer', offset 0x07 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Serial Number', offset 0x08 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Asset Tag', offset 0x09 has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x06 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Model Part Number', offset 0x0a has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x07 in table entry 'System Power Supply (Type 39)' @ 0xca60b6c9, field 'Revision Level', offset 0x0b has a default value 'To Be Filled By O.E.M.' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Processor Information (Type 4)' @ 0xca60b852, field 'Asset Tag', offset 0x21 has a default value 'Fill By OEM' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'Processor Information (Type 4)' @ 0xca60b852, field 'Part Number', offset 0x22 has a default value 'Fill By OEM' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60b8dd, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60b939, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60b995, field 'Serial Number', offset 0x18 has a default value '00000000' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60b995, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x03 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Manufacturer', offset 0x17 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x04 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Serial Number', offset 0x18 has a default value '[Empty]' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x05 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Asset Tag', offset 0x19 has a default value '9876543210' and probably has not been updated by the BIOS vendor. dmicheck: String index 0x06 in table entry 'Memory Device (Type 17)' @ 0xca60ba21, field 'Part Number', offset 0x1a has a default value '[Empty]' and probably has not been updated by the BIOS vendor. syntaxcheck: Assembler remark in line 3219 syntaxcheck: Assembler remark in line 5035 syntaxcheck: Assembler remark in line 5038 syntaxcheck: Assembler remark in line 5097 syntaxcheck: Assembler remark in line 5099 syntaxcheck: Assembler remark in line 5433 syntaxcheck: Assembler remark in line 8775 syntaxcheck: Assembler remark in line 8860 syntaxcheck: Assembler remark in line 8945 syntaxcheck: Assembler remark in line 9030 syntaxcheck: Assembler remark in line 9356 syntaxcheck: Assembler remark in line 9441 syntaxcheck: Assembler remark in line 9526 syntaxcheck: Assembler remark in line 10433 syntaxcheck: Assembler remark in line 10437 syntaxcheck: Assembler remark in line 10620 syntaxcheck: Assembler remark in line 10724 syntaxcheck: Assembler remark in line 10728 syntaxcheck: Assembler remark in line 10854 syntaxcheck: Assembler remark in line 130 syntaxcheck: Assembler remark in line 159 syntaxcheck: Assembler remark in line 174 syntaxcheck: Assembler remark in line 177 syntaxcheck: Assembler remark in line 203 syntaxcheck: Assembler remark in line 283 syntaxcheck: Assembler remark in line 295 syntaxcheck: Assembler remark in line 233 syntaxcheck: Assembler remark in line 250 syntaxcheck: Assembler remark in line 267 syntaxcheck: Assembler remark in line 284 syntaxcheck: Assembler remark in line 293 syntaxcheck: Assembler remark in line 491 syntaxcheck: Assembler remark in line 492 syntaxcheck: Assembler remark in line 493 syntaxcheck: Assembler remark in line 494 syntaxcheck: Assembler remark in line 495 syntaxcheck: Assembler remark in line 496 syntaxcheck: Assembler remark in line 515 syntaxcheck: Assembler remark in line 784 Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ acpiinfo | | | | | | 3| acpitables | 24| | | | | | apicedge | 1| | | | | | apicinstance | 1| | | | | | aspm | 2| 1| | 11| | | autobrightness | 3| | | | | | bios32 | | | | | 1| | bios_info | | | | | | 1| checksum | 19| | | | | | cpufreq | | | | 1| | | crs | 1| | | | | | csm | | | | | | 1| cstates | 15| | | | | | dmar | 2| | | | | | dmicheck | 54| 43| | | | | ebda | | | | | 1| | fadt | 3| | | | | | fan | 10| 1| | | | | hda_audio | 2| | | | | | hpet_check | 5| | | | | | klog | | 10| | | | | maxfreq | 1| | | | | | maxreadreq | 1| | | | | | mcfg | 2| | | | | | method | 362| 11| | 1| 118| | microcode | | | | | 1| | mpcheck | | | | | 9| | msr | 98| | | | | | mtrr | 1| 15| | | 1| | nx | 3| | | | | | oops | 2| | | | | | os2gap | 1| | | | | | osilinux | | | | 1| | | pcc | | | | | | 1| pciirq | | | | | | | pnp | | | | | | | securebootcert | 3| | | | | 1| syntaxcheck | | 84| | | | | uefibootpath | 4| | | | | | version | | | | | | 4| virt | 1| | | | | | wakealarm | 4| | | | | | wmi | 1| | | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 626| 165| 0| 14| 131| 11| ---------------+-----+-----+-----+-----+-----+-----+ Results generated by fwts: Version V14.09.00 (2014-09-24 07:47:50). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 14/10/14 at 01:14:19 on host Linux lasam 3.16.0-21-generic #28-Ubuntu SMP Mon Oct 6 16:00:43 UTC 2014 x86_64. Command: "fwts method". Running tests: method. method: ACPI DSDT Method Semantic tests. -------------------------------------------------------------------------------- FADT X_FIRMWARE_CTRL 64 bit pointer was zero, falling back to using FIRMWARE_CTRL 32 bit pointer. Test 1 of 169: Test Method Names. Found 1793 Objects PASSED: Test 1, Method names contain legal characters. Test 2 of 169: Test _AEI. SKIPPED: Test 2, Skipping test for non-existant object _AEI. Test 3 of 169: Test _EVT (Event Method). SKIPPED: Test 3, Skipping test for non-existant object _EVT. Test 4 of 169: Test _PIC (Inform AML of Interrupt Model). PASSED: Test 4, \_PIC returned no values as expected. PASSED: Test 4, \_PIC returned no values as expected. PASSED: Test 4, \_PIC returned no values as expected. Test 5 of 169: Test _CID (Compatible ID). PASSED: Test 5, \_SB_.PCI0._CID returned an integer 0x030ad041 (EISA ID PNP0A03). PASSED: Test 5, \_SB_.PCI0.LPCB.CWDT._CID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2K._CID returned an integer 0x0303d041 (EISA ID PNP0303). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x130fd041 (EISA ID PNP0F13). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x0e0fd041 (EISA ID PNP0F0E). PASSED: Test 5, \_SB_.PCI0.LPCB.PS2M._CID returned an integer 0x030fd041 (EISA ID PNP0F03). PASSED: Test 5, \_SB_.PCI0.ITPM._CID returned an integer 0x310cd041 (EISA ID PNP0C31). PASSED: Test 5, \_SB_.TPM_._CID returned an integer 0x310cd041 (EISA ID PNP0C31). Test 6 of 169: Test _DDN (DOS Device Name). SKIPPED: Test 6, Skipping test for non-existant object _DDN. Test 7 of 169: Test _HID (Hardware ID). PASSED: Test 7, \_SB_.PCI0._HID returned an integer 0x080ad041 (EISA ID PNP0A08). PASSED: Test 7, \_SB_.PCI0.TPMX._HID returned an integer 0x010cd041 (EISA ID PNP0C01). PASSED: Test 7, \_SB_.PCI0.LPCB.DMAC._HID returned an integer 0x0002d041 (EISA ID PNP0200). PASSED: Test 7, \_SB_.PCI0.LPCB.FWHD._HID returned an integer 0x0008d425 (EISA ID INT0800). PASSED: Test 7, \_SB_.PCI0.LPCB.HPET._HID returned an integer 0x0301d041 (EISA ID PNP0103). PASSED: Test 7, \_SB_.PCI0.LPCB.IPIC._HID returned an integer 0x0000d041 (EISA ID PNP0000). PASSED: Test 7, \_SB_.PCI0.LPCB.LDRC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.LPCB.RTC_._HID returned an integer 0x000bd041 (EISA ID PNP0B00). PASSED: Test 7, \_SB_.PCI0.LPCB.TIMR._HID returned an integer 0x0001d041 (EISA ID PNP0100). PASSED: Test 7, \_SB_.PCI0.LPCB.CWDT._HID returned an integer 0x0d3fd425 (EISA ID INT3F0D). PASSED: Test 7, \_SB_.PCI0.LPCB.H_EC._HID returned an integer 0x090cd041 (EISA ID PNP0C09). PASSED: Test 7, \_SB_.PCI0.LPCB.H_EC.ALSD._HID returned a string 'ACPI0008' as expected. PASSED: Test 7, \_SB_.PCI0.LPCB.PS2K._HID returned a string 'MSF0001' as expected. PASSED: Test 7, \_SB_.PCI0.LPCB.PS2M._HID returned an integer 0x000b8416 (EISA ID ETD0B00). PASSED: Test 7, \_SB_.PCI0.LPCB.RMSC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.LPCB.COPR._HID returned an integer 0x040cd041 (EISA ID PNP0C04). PASSED: Test 7, \_SB_.PCI0.PDRC._HID returned an integer 0x020cd041 (EISA ID PNP0C02). PASSED: Test 7, \_SB_.PCI0.ITPM._HID returned a string 'INTC0102' as expected. PASSED: Test 7, \_SB_.PCI0.AMW0._HID returned a string 'PNP0C14' as expected. PASSED: Test 7, \_SB_.LNKA._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKB._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKC._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKD._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKE._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKF._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKG._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.LNKH._HID returned an integer 0x0f0cd041 (EISA ID PNP0C0F). PASSED: Test 7, \_SB_.ADP1._HID returned a string 'ACPI0003' as expected. PASSED: Test 7, \_SB_.BAT1._HID returned an integer 0x0a0cd041 (EISA ID PNP0C0A). PASSED: Test 7, \_SB_.LID0._HID returned an integer 0x0d0cd041 (EISA ID PNP0C0D). PASSED: Test 7, \_SB_.PWRB._HID returned an integer 0x0c0cd041 (EISA ID PNP0C0C). PASSED: Test 7, \_SB_.SAPM._HID returned a string 'SAM0714' as expected. PASSED: Test 7, \_SB_.MEM2._HID returned an integer 0x010cd041 (EISA ID PNP0C01). PASSED: Test 7, \_SB_.TPM_._HID returned an integer 0x0201d824 (EISA ID IFX0102). PASSED: Test 7, \_TZ_.FAN0._HID returned an integer 0x0b0cd041 (EISA ID PNP0C0B). PASSED: Test 7, \_TZ_.FAN1._HID returned an integer 0x0b0cd041 (EISA ID PNP0C0B). Test 8 of 169: Test _HRV (Hardware Revision Number). SKIPPED: Test 8, Skipping test for non-existant object _HRV. Test 9 of 169: Test _PLD (Physical Device Location). PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR11._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR12._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR13._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR14._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR15._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR16._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR17._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC1.HUBN.PR01.PR18._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR11._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR12._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR13._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR14._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR14.WCAM._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR15._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.EHC2.HUBN.PR01.PR16._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP1._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP2._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP3._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.HSP4._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP1._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP2._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP3._PLD correctly returned a sane looking package. PASSED: Test 9, \_SB_.PCI0.XHC_.RHUB.SSP4._PLD correctly returned a sane looking package. Test 10 of 169: Test _SUB (Subsystem ID). SKIPPED: Test 10, Skipping test for non-existant object _SUB. Test 11 of 169: Test _SUN (Slot User Number). SKIPPED: Test 11, Skipping test for non-existant object _SUN. Test 12 of 169: Test _STR (String). PASSED: Test 12, \_SB_.PCI0.ITPM._STR correctly returned a buffer of 30 elements. PASSED: Test 12, \_SB_.TPM_._STR correctly returned a buffer of 30 elements. Test 13 of 169: Test _UID (Unique ID). PASSED: Test 13, \_SB_.PCI0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.PCI0.TPMX._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.LPCB.HPET._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.PCI0.LPCB.LDRC._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.PCI0.LPCB.H_EC._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.LPCB.RMSC._UID correctly returned sane looking value 0x00000010. PASSED: Test 13, \_SB_.PCI0.PDRC._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.PCI0.AMW0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_SB_.LNKA._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.LNKB._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.LNKC._UID correctly returned sane looking value 0x00000003. PASSED: Test 13, \_SB_.LNKD._UID correctly returned sane looking value 0x00000004. PASSED: Test 13, \_SB_.LNKE._UID correctly returned sane looking value 0x00000005. PASSED: Test 13, \_SB_.LNKF._UID correctly returned sane looking value 0x00000006. PASSED: Test 13, \_SB_.LNKG._UID correctly returned sane looking value 0x00000007. PASSED: Test 13, \_SB_.LNKH._UID correctly returned sane looking value 0x00000008. PASSED: Test 13, \_SB_.BAT1._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.SAPM._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_SB_.MEM2._UID correctly returned sane looking value 0x00000002. PASSED: Test 13, \_SB_.TPM_._UID correctly returned sane looking value 0x00000001. PASSED: Test 13, \_TZ_.FAN0._UID correctly returned sane looking value 0x00000000. PASSED: Test 13, \_TZ_.FAN1._UID correctly returned sane looking value 0x00000001. Test 14 of 169: Test _CDM (Clock Domain). SKIPPED: Test 14, Skipping test for non-existant object _CDM. Test 15 of 169: Test _CRS (Current Resource Settings). PASSED: Test 15, \_SB_.PCI0._CRS (WORD Address Space Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.TPMX._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.DMAC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.FWHD._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.HPET._CRS (End Tag Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.IPIC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.LDRC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.RTC_._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.TIMR._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.CWDT._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.H_EC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.PS2K._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.PS2M._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.RMSC._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.LPCB.COPR._CRS (I/O Port Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.PDRC._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.PCI0.ITPM._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKA._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKB._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKC._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKD._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKE._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKF._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKG._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.LNKH._CRS (IRQ Descriptor) looks sane. PASSED: Test 15, \_SB_.MEM2._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. PASSED: Test 15, \_SB_.TPM_._CRS (32-bit Fixed Location Memory Range Descriptor) looks sane. Test 16 of 169: Test _DSD (Device Specific Data). SKIPPED: Test 16, Skipping test for non-existant object _DSD. Test 17 of 169: Test _DIS (Disable). PASSED: Test 17, \_SB_.LNKA._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKB._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKC._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKD._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKE._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKF._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKG._DIS returned no values as expected. PASSED: Test 17, \_SB_.LNKH._DIS returned no values as expected. Test 18 of 169: Test _DMA (Direct Memory Access). SKIPPED: Test 18, Skipping test for non-existant object _DMA. Test 19 of 169: Test _FIX (Fixed Register Resource Provider). SKIPPED: Test 19, Skipping test for non-existant object _FIX. Test 20 of 169: Test _GSB (Global System Interrupt Base). SKIPPED: Test 20, Skipping test for non-existant object _GSB. Test 21 of 169: Test _HPP (Hot Plug Parameters). SKIPPED: Test 21, Skipping test for non-existant object _HPP. Test 22 of 169: Test _PRS (Possible Resource Settings). PASSED: Test 22, \_SB_.PCI0.LPCB.PS2K._PRS (Start Dependent Functions Descriptor) looks sane. PASSED: Test 22, \_SB_.PCI0.LPCB.PS2M._PRS (Start Dependent Functions Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKA._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKB._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKC._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKD._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKE._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKF._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKG._PRS (IRQ Descriptor) looks sane. PASSED: Test 22, \_SB_.LNKH._PRS (IRQ Descriptor) looks sane. Test 23 of 169: Test _PXM (Proximity). SKIPPED: Test 23, Skipping test for non-existant object _PXM. Test 24 of 169: Test _CCA (Cache Coherency Attribute). SKIPPED: Test 24, Skipping test for non-existant object _CCA. Test 25 of 169: Test _EDL (Eject Device List). SKIPPED: Test 25, Skipping test for non-existant object _EDL. Test 26 of 169: Test _EJD (Ejection Dependent Device). SKIPPED: Test 26, Skipping test for non-existant object _EJD. Test 27 of 169: Test _EJ0 (Eject). SKIPPED: Test 27, Skipping test for non-existant object _EJ0. Test 28 of 169: Test _EJ1 (Eject). SKIPPED: Test 28, Skipping test for non-existant object _EJ1. Test 29 of 169: Test _EJ2 (Eject). SKIPPED: Test 29, Skipping test for non-existant object _EJ2. Test 30 of 169: Test _EJ3 (Eject). SKIPPED: Test 30, Skipping test for non-existant object _EJ3. Test 31 of 169: Test _EJ4 (Eject). SKIPPED: Test 31, Skipping test for non-existant object _EJ4. Test 32 of 169: Test _LCK (Lock). SKIPPED: Test 32, Skipping test for non-existant object _LCK. Test 33 of 169: Test _RMV (Remove). SKIPPED: Test 33, Skipping test for non-existant object _RMV. Test 34 of 169: Test _STA (Status). PASSED: Test 34, \_SB_.PCI0.TPMX._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.HPET._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.PCI0.LPCB.CWDT._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.H_EC.ALSD._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.PCI0.LPCB.PS2K._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.LPCB.PS2M._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.PEG0.PEGP._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.PCI0.ITPM._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.LNKA._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKB._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKC._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKD._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKE._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKF._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKG._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.LNKH._STA correctly returned sane looking value 0x0000000b. PASSED: Test 34, \_SB_.ADP1._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.BAT1._STA correctly returned sane looking value 0x0000000f. PASSED: Test 34, \_SB_.SAPM._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.MEM2._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_SB_.TPM_._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_TZ_.FN00._STA correctly returned sane looking value 0x00000000. PASSED: Test 34, \_TZ_.FN01._STA correctly returned sane looking value 0x00000000. Test 35 of 169: Test _BDN (BIOS Dock Name). SKIPPED: Test 35, Skipping test for non-existant object _BDN. Test 36 of 169: Test _BBN (Base Bus Number). PASSED: Test 36, \_SB_.PCI0._BBN correctly returned an integer. Test 37 of 169: Test _DCK (Dock). SKIPPED: Test 37, Skipping test for non-existant object _DCK. Test 38 of 169: Test _INI (Initialize). PASSED: Test 38, \_SB_.PCI0.PEG0.PEGP._INI returned no values as expected. PASSED: Test 38, \_SB_.PCI0._INI returned no values as expected. Test 39 of 169: Test _GLK (Global Lock). SKIPPED: Test 39, Skipping test for non-existant object _GLK. Test 40 of 169: Test _SEG (Segment). SKIPPED: Test 40, Skipping test for non-existant object _SEG. Test 41 of 169: Test _OFF (Set resource off). PASSED: Test 41, \_SB_.PCI0.PEG0.PEGP._OFF returned no values as expected. PASSED: Test 41, \_TZ_.FN00._OFF returned no values as expected. PASSED: Test 41, \_TZ_.FN01._OFF returned no values as expected. Test 42 of 169: Test _ON (Set resource on). SKIPPED: Test 42, Skipping test for non-existant object _ON. Test 43 of 169: Test _DSW (Device Sleep Wake). SKIPPED: Test 43, Skipping test for non-existant object _DSW. Test 44 of 169: Test _IRC (In Rush Current). SKIPPED: Test 44, Skipping test for non-existant object _IRC. Test 45 of 169: Test _PRE (Power Resources for Enumeration). SKIPPED: Test 45, Skipping test for non-existant object _PRE. Test 46 of 169: Test _PR0 (Power Resources for D0). PASSED: Test 46, \_TZ_.FAN0._PR0 correctly returned a sane looking package. PASSED: Test 46, \_TZ_.FAN1._PR0 correctly returned a sane looking package. Test 47 of 169: Test _PR1 (Power Resources for D1). SKIPPED: Test 47, Skipping test for non-existant object _PR1. Test 48 of 169: Test _PR2 (Power Resources for D2). SKIPPED: Test 48, Skipping test for non-existant object _PR2. Test 49 of 169: Test _PR3 (Power Resources for D3). SKIPPED: Test 49, Skipping test for non-existant object _PR3. Test 50 of 169: Test _PS0 (Power State 0). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method _PS0 WARNING: Test 50, Detected an infinite loop when evaluating method '\_SB_.PCI0.LPCB.PS2K._PS0'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 50, \_SB_.PCI0.LPCB.PS2M._PS0 returned no values as expected. Test 51 of 169: Test _PS1 (Power State 1). SKIPPED: Test 51, Skipping test for non-existant object _PS1. Test 52 of 169: Test _PS2 (Power State 2). SKIPPED: Test 52, Skipping test for non-existant object _PS2. Test 53 of 169: Test _PS3 (Power State 3). PASSED: Test 53, \_SB_.PCI0.LPCB.PS2K._PS3 returned no values as expected. PASSED: Test 53, \_SB_.PCI0.LPCB.PS2M._PS3 returned no values as expected. Test 54 of 169: Test _PSC (Power State Current). SKIPPED: Test 54, Skipping test for non-existant object _PSC. Test 55 of 169: Test _PSE (Power State for Enumeration). SKIPPED: Test 55, Skipping test for non-existant object _PSE. Test 56 of 169: Test _PSW (Power State Wake). PASSED: Test 56, \_SB_.PCI0.EHC1._PSW returned no values as expected. PASSED: Test 56, \_SB_.PCI0.EHC2._PSW returned no values as expected. Test 57 of 169: Test _S1D (S1 Device State). SKIPPED: Test 57, Skipping test for non-existant object _S1D. Test 58 of 169: Test _S2D (S2 Device State). SKIPPED: Test 58, Skipping test for non-existant object _S2D. Test 59 of 169: Test _S3D (S3 Device State). PASSED: Test 59, \_SB_.PCI0.EHC1._S3D correctly returned an integer. PASSED: Test 59, \_SB_.PCI0.EHC2._S3D correctly returned an integer. PASSED: Test 59, \_SB_.PCI0.XHC_._S3D correctly returned an integer. Test 60 of 169: Test _S4D (S4 Device State). PASSED: Test 60, \_SB_.PCI0.EHC1._S4D correctly returned an integer. PASSED: Test 60, \_SB_.PCI0.EHC2._S4D correctly returned an integer. PASSED: Test 60, \_SB_.PCI0.XHC_._S4D correctly returned an integer. Test 61 of 169: Test _S0W (S0 Device Wake State). SKIPPED: Test 61, Skipping test for non-existant object _S0W. Test 62 of 169: Test _S1W (S1 Device Wake State). SKIPPED: Test 62, Skipping test for non-existant object _S1W. Test 63 of 169: Test _S2W (S2 Device Wake State). SKIPPED: Test 63, Skipping test for non-existant object _S2W. Test 64 of 169: Test _S3W (S3 Device Wake State). SKIPPED: Test 64, Skipping test for non-existant object _S3W. Test 65 of 169: Test _S4W (S4 Device Wake State). SKIPPED: Test 65, Skipping test for non-existant object _S4W. Test 66 of 169: Test _S0_ (S0 System State). \_S0_ PM1a_CNT.SLP_TYP value: 0x00000000 \_S0_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 66, \_S0_ correctly returned a sane looking package. Test 67 of 169: Test _S1_ (S1 System State). SKIPPED: Test 67, Skipping test for non-existant object _S1_. Test 68 of 169: Test _S2_ (S2 System State). SKIPPED: Test 68, Skipping test for non-existant object _S2_. Test 69 of 169: Test _S3_ (S3 System State). \_S3_ PM1a_CNT.SLP_TYP value: 0x00000005 \_S3_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 69, \_S3_ correctly returned a sane looking package. Test 70 of 169: Test _S4_ (S4 System State). \_S4_ PM1a_CNT.SLP_TYP value: 0x00000006 \_S4_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 70, \_S4_ correctly returned a sane looking package. Test 71 of 169: Test _S5_ (S5 System State). \_S5_ PM1a_CNT.SLP_TYP value: 0x00000007 \_S5_ PM1b_CNT.SLP_TYP value: 0x00000000 PASSED: Test 71, \_S5_ correctly returned a sane looking package. Test 72 of 169: Test _SWS (System Wake Source). SKIPPED: Test 72, Skipping test for non-existant object _SWS. Test 73 of 169: Test _PSS (Performance Supported States). \_PR_.CPU0._PSS values: P-State Freq Power Latency Bus Master (MHz) (mW) (us) Latency (us) 0 2401 45000 10 10 1 2400 45000 10 10 2 2300 42264 10 10 3 2200 40021 10 10 4 2100 37822 10 10 5 2000 35666 10 10 6 1900 33552 10 10 7 1800 31487 10 10 8 1700 29042 10 10 9 1600 27058 10 10 10 1500 25116 10 10 11 1400 23214 10 10 12 1300 21357 10 10 13 1200 19535 10 10 PASSED: Test 73, \_PR_.CPU0._PSS correctly returned a sane looking package. Test 74 of 169: Test _CPC (Continuous Performance Control). SKIPPED: Test 74, Skipping test for non-existant object _CPC. Test 75 of 169: Test _CSD (C State Dependencies). SKIPPED: Test 75, Skipping test for non-existant object _CSD. Test 76 of 169: Test _CST (C States). SKIPPED: Test 76, Skipping test for non-existant object _CST. Test 77 of 169: Test _PCT (Performance Control). PASSED: Test 77, \_PR_.CPU0._PCT correctly returned a sane looking package. Test 78 of 169: Test _PDL (P-State Depth Limit). SKIPPED: Test 78, Skipping test for non-existant object _PDL. Test 79 of 169: Test _PPC (Performance Present Capabilities). PASSED: Test 79, \_PR_.CPU0._PPC correctly returned an integer. Test 80 of 169: Test _PPE (Polling for Platform Error). SKIPPED: Test 80, Skipping test for non-existant object _PPE. Test 81 of 169: Test _TDL (T-State Depth Limit). SKIPPED: Test 81, Skipping test for non-existant object _TDL. Test 82 of 169: Test _TPC (Throttling Present Capabilities). SKIPPED: Test 82, Skipping test for non-existant object _TPC. Test 83 of 169: Test _TSD (Throttling State Dependencies). SKIPPED: Test 83, Skipping test for non-existant object _TSD. Test 84 of 169: Test _TSS (Throttling Supported States). SKIPPED: Test 84, Skipping test for non-existant object _TSS. Test 85 of 169: Test _PUR (Processor Utilization Request). SKIPPED: Test 85, Skipping test for non-existant object _PUR. Test 86 of 169: Test _MSG (Message). SKIPPED: Test 86, Skipping test for non-existant object _MSG. Test 87 of 169: Test _SST (System Status). SKIPPED: Test 87, Skipping test for non-existant object _SST. Test 88 of 169: Test _ALC (Ambient Light Colour Chromaticity). SKIPPED: Test 88, Skipping test for non-existant object _ALC. Test 89 of 169: Test _ALI (Ambient Light Illuminance). PASSED: Test 89, \_SB_.PCI0.LPCB.H_EC.ALSD._ALI correctly returned an integer. Test 90 of 169: Test _ALT (Ambient Light Temperature). SKIPPED: Test 90, Skipping test for non-existant object _ALT. Test 91 of 169: Test _ALP (Ambient Light Polling). SKIPPED: Test 91, Skipping test for non-existant object _ALP. Test 92 of 169: Test _LID (Lid Status). PASSED: Test 92, \_SB_.LID0._LID correctly returned sane looking value 0x00000000. Test 93 of 169: Test _GTF (Get Task File). PASSED: Test 93, \_SB_.PCI0.SAT0.SPT0._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT1._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT3._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT4._GTF correctly returned a sane looking buffer. PASSED: Test 93, \_SB_.PCI0.SAT0.SPT5._GTF correctly returned a sane looking buffer. Test 94 of 169: Test _GTM (Get Timing Mode). PASSED: Test 94, \_SB_.PCI0.SAT0._GTM correctly returned a sane looking buffer. Test 95 of 169: Test _UPD (User Presence Detect). SKIPPED: Test 95, Skipping test for non-existant object _UPD. Test 96 of 169: Test _UPP (User Presence Polling). SKIPPED: Test 96, Skipping test for non-existant object _UPP. Test 97 of 169: Test _GCP (Get Capabilities). SKIPPED: Test 97, Skipping test for non-existant object _GCP. Test 98 of 169: Test _GRT (Get Real Time). SKIPPED: Test 98, Skipping test for non-existant object _GRT. Test 99 of 169: Test _GWS (Get Wake Status). SKIPPED: Test 99, Skipping test for non-existant object _GWS. Test 100 of 169: Test _STP (Set Expired Timer Wake Policy). SKIPPED: Test 100, Skipping test for non-existant object _STP. Test 101 of 169: Test _STV (Set Timer Value). SKIPPED: Test 101, Skipping test for non-existant object _STV. Test 102 of 169: Test _TIP (Expired Timer Wake Policy). SKIPPED: Test 102, Skipping test for non-existant object _TIP. Test 103 of 169: Test _TIV (Timer Values). SKIPPED: Test 103, Skipping test for non-existant object _TIV. Test 104 of 169: Test _SBS (Smart Battery Subsystem). SKIPPED: Test 104, Skipping test for non-existant object _SBS. Test 105 of 169: Test _BCT (Battery Charge Time). SKIPPED: Test 105, Skipping test for non-existant object _BCT. Test 106 of 169: Test _BIF (Battery Information). PASSED: Test 106, \_SB_.BAT1._BIF correctly returned a sane looking package. Test 107 of 169: Test _BIX (Battery Information Extended). PASSED: Test 107, \_SB_.BAT1._BIX correctly returned a sane looking package. Test 108 of 169: Test _BMA (Battery Measurement Averaging). SKIPPED: Test 108, Skipping test for non-existant object _BMA. Test 109 of 169: Test _BMC (Battery Maintenance Control). SKIPPED: Test 109, Skipping test for non-existant object _BMC. Test 110 of 169: Test _BMD (Battery Maintenance Data). SKIPPED: Test 110, Skipping test for non-existant object _BMD. Test 111 of 169: Test _BMS (Battery Measurement Sampling Time). SKIPPED: Test 111, Skipping test for non-existant object _BMS. Test 112 of 169: Test _BST (Battery Status). PASSED: Test 112, \_SB_.BAT1._BST correctly returned a sane looking package. Test 113 of 169: Test _BTP (Battery Trip Point). PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. PASSED: Test 113, \_SB_.BAT1._BTP returned no values as expected. Test 114 of 169: Test _BTM (Battery Time). SKIPPED: Test 114, Skipping test for non-existant object _BTM. Test 115 of 169: Test _PCL (Power Consumer List). FAILED [CRITICAL] AETtype: Test 115, Detected error 'Type' when evaluating '\_SB_.ADP1._PCL'. ADVICE: The type of an object is incorrect and does not match the expected type. ACPI will generally abort execution of the AML op-code that causes this error. FAILED [CRITICAL] AETtype: Test 115, Detected error 'Type' when evaluating '\_SB_.BAT1._PCL'. ADVICE: The type of an object is incorrect and does not match the expected type. ACPI will generally abort execution of the AML op-code that causes this error. Test 116 of 169: Test _PIF (Power Source Information). SKIPPED: Test 116, Skipping test for non-existant object _PIF. Test 117 of 169: Test _PSR (Power Source). PASSED: Test 117, \_SB_.ADP1._PSR correctly returned sane looking value 0x00000000. Test 118 of 169: Test _GAI (Get Averaging Level). SKIPPED: Test 118, Skipping test for non-existant object _GAI. Test 119 of 169: Test _GHL (Get Harware Limit). SKIPPED: Test 119, Skipping test for non-existant object _GHL. Test 120 of 169: Test _PMM (Power Meter Measurement). SKIPPED: Test 120, Skipping test for non-existant object _PMM. Test 121 of 169: Test _FIF (Fan Information). SKIPPED: Test 121, Skipping test for non-existant object _FIF. Test 122 of 169: Test _FSL (Fan Set Level). SKIPPED: Test 122, Skipping test for non-existant object _FSL. Test 123 of 169: Test _FST (Fan Status). SKIPPED: Test 123, Skipping test for non-existant object _FST. Test 124 of 169: Test _ACx (Active Cooling). PASSED: Test 124, \_TZ_.TZ00._AC0 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC1 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC2 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC3 correctly returned a sane looking return type. PASSED: Test 124, \_TZ_.TZ00._AC4 correctly returned a sane looking return type. SKIPPED: Test 124, Skipping test for non-existant object _AC5. SKIPPED: Test 124, Skipping test for non-existant object _AC6. SKIPPED: Test 124, Skipping test for non-existant object _AC7. SKIPPED: Test 124, Skipping test for non-existant object _AC8. SKIPPED: Test 124, Skipping test for non-existant object _AC9. Test 125 of 169: Test _ART (Active Cooling Relationship Table). SKIPPED: Test 125, Skipping test for non-existant object _ART. Test 126 of 169: Test _CRT (Critical Trip Point). PASSED: Test 126, \_TZ_.TZ00._CRT correctly returned a sane looking return type. PASSED: Test 126, \_TZ_.TZ01._CRT correctly returned a sane looking return type. Test 127 of 169: Test _DTI (Device Temperature Indication). SKIPPED: Test 127, Skipping test for non-existant object _DTI. Test 128 of 169: Test _HOT (Hot Temperature). SKIPPED: Test 128, Skipping test for non-existant object _HOT. Test 129 of 169: Test _NTT (Notification Temp Threshold). SKIPPED: Test 129, Skipping test for non-existant object _NTT. Test 130 of 169: Test _PSL (Passive List). PASSED: Test 130, \_TZ_.TZ00._PSL correctly returned a sane looking package. PASSED: Test 130, \_TZ_.TZ01._PSL correctly returned a sane looking package. Test 131 of 169: Test _PSV (Passive Temp). PASSED: Test 131, \_TZ_.TZ00._PSV correctly returned a sane looking return type. PASSED: Test 131, \_TZ_.TZ01._PSV correctly returned a sane looking return type. Test 132 of 169: Test _RTV (Relative Temp Values). SKIPPED: Test 132, Skipping test for non-existant object _RTV. Test 133 of 169: Test _SCP (Set Cooling Policy). SKIPPED: Test 133, Skipping test for non-existant object _DTI. Test 134 of 169: Test _TC1 (Thermal Constant 1). PASSED: Test 134, _TC1 correctly returned sane looking value 0x00000000. PASSED: Test 134, _TC1 correctly returned sane looking value 0x00000000. Test 135 of 169: Test _TC2 (Thermal Constant 2). PASSED: Test 135, _TC1 correctly returned sane looking value 0x00000000. PASSED: Test 135, _TC1 correctly returned sane looking value 0x00000000. Test 136 of 169: Test _TMP (Thermal Zone Current Temp). PASSED: Test 136, \_TZ_.TZ00._TMP correctly returned a sane looking return type. PASSED: Test 136, \_TZ_.TZ01._TMP correctly returned a sane looking return type. Test 137 of 169: Test _TPT (Trip Point Temperature). SKIPPED: Test 137, Skipping test for non-existant object _TPT. Test 138 of 169: Test _TRT (Thermal Relationship Table). SKIPPED: Test 138, Skipping test for non-existant object _TRT. Test 139 of 169: Test _TSP (Thermal Sampling Period). PASSED: Test 139, _TSP correctly returned sane looking value 0.000000 seconds PASSED: Test 139, _TSP correctly returned sane looking value 0.000000 seconds Test 140 of 169: Test _TST (Temperature Sensor Threshold). SKIPPED: Test 140, Skipping test for non-existant object _TST. Test 141 of 169: Test _TZD (Thermal Zone Devices). SKIPPED: Test 141, Skipping test for non-existant object _TZD. Test 142 of 169: Test _TZM (Thermal Zone member). SKIPPED: Test 142, Skipping test for non-existant object _TZM. Test 143 of 169: Test _TZP (Thermal Zone Polling). SKIPPED: Test 143, Skipping test for non-existant object _TZP. Test 144 of 169: Test _PTS (Prepare to Sleep). Test _PTS(1). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(2). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(3). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(4). PASSED: Test 144, \_PTS returned no values as expected. Test _PTS(5). PASSED: Test 144, \_PTS returned no values as expected. Test 145 of 169: Test _TTS (Transition to State). SKIPPED: Test 145, Optional control method _TTS does not exist. Test 146 of 169: Test _S0 (System S0 State). SKIPPED: Test 146, Skipping test for non-existant object _S0. Test 147 of 169: Test _S1 (System S1 State). SKIPPED: Test 147, Skipping test for non-existant object _S1. Test 148 of 169: Test _S2 (System S2 State). SKIPPED: Test 148, Skipping test for non-existant object _S2. Test 149 of 169: Test _S3 (System S3 State). SKIPPED: Test 149, Skipping test for non-existant object _S3. Test 150 of 169: Test _S4 (System S4 State). SKIPPED: Test 150, Skipping test for non-existant object _S4. Test 151 of 169: Test _S5 (System S5 State). SKIPPED: Test 151, Skipping test for non-existant object _S5. Test 152 of 169: Test _WAK (System Wake). Test _WAK(1) System Wake, State S1. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(2) System Wake, State S2. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(3) System Wake, State S3. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(4) System Wake, State S4. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test _WAK(5) System Wake, State S5. PASSED: Test 152, \_WAK correctly returned a sane looking package. Test 153 of 169: Test _ADR (Return Unique ID for Device). PASSED: Test 153, \_SB_.PCI0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.LPCB._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.P0P1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB5._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB6._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.USB7._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP01.PXSX._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.RP04.PXSX._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD02._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD03._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD05._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD06._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD07._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGP.DD08._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGA._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG0.PEGH._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.B0D4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.PEG3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD02._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD03._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD04._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD05._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD06._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD07._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.GFX0.DD08._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR11._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR12._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR13._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR14._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR15._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR16._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR17._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC1.HUBN.PR01.PR18._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR11._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR12._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR13._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR14._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR14.WCAM._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR15._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.EHC2.HUBN.PR01.PR16._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.HSP4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP2._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.XHC_.RHUB.SSP4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.HDEF._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT0._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT3._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT4._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT0.SPT5._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SAT1._ADR correctly returned an integer. PASSED: Test 153, \_SB_.PCI0.SBUS._ADR correctly returned an integer. Test 154 of 169: Test _BCL (Query List of Brightness Control Levels Supported). Brightness levels for \_SB_.PCI0.PEG0.PEGP.DD02._BCL: Level on full power : 80 Level on battery power: 13 Brightness Levels : 7, 13, 20, 30, 45, 60, 80, 100 PASSED: Test 154, \_SB_.PCI0.PEG0.PEGP.DD02._BCL returned a sane package of 10 integers. Brightness levels for \_SB_.PCI0.GFX0.DD02._BCL: Level on full power : 80 Level on battery power: 13 Brightness Levels : 7, 13, 20, 30, 45, 60, 80, 100 PASSED: Test 154, \_SB_.PCI0.GFX0.DD02._BCL returned a sane package of 10 integers. Test 155 of 169: Test _BCM (Set Brightness Level). FAILED [MEDIUM] MethodShouldReturnNothing: Test 155, \_SB_.PCI0.PEG0.PEGP.DD02._BCM returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 155, \_SB_.PCI0.GFX0.DD02._BCM returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 156 of 169: Test _BQC (Brightness Query Current Level). PASSED: Test 156, \_SB_.PCI0.PEG0.PEGP.DD02._BQC correctly returned an integer. PASSED: Test 156, \_SB_.PCI0.GFX0.DD02._BQC correctly returned an integer. Test 157 of 169: Test _DCS (Return the Status of Output Device). FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD01._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. PASSED: Test 157, \_SB_.PCI0.PEG0.PEGP.DD02._DCS correctly returned an integer. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD03._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD04._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD05._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD06._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD07._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. FAILED [MEDIUM] MethodReturnNullObj: Test 157, \_SB_.PCI0.PEG0.PEGP.DD08._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. PASSED: Test 157, \_SB_.PCI0.GFX0.DD01._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD02._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD03._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD04._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD05._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD06._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD07._DCS correctly returned an integer. PASSED: Test 157, \_SB_.PCI0.GFX0.DD08._DCS correctly returned an integer. Test 158 of 169: Test _DDC (Return the EDID for this Device). SKIPPED: Test 158, Skipping test for non-existant object _DDC. Test 159 of 169: Test _DSS (Device Set State). PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD01._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD02._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD03._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD04._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD05._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD06._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD07._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.PEG0.PEGP.DD08._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD01._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD02._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD03._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD04._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD05._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD06._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD07._DSS returned no values as expected. PASSED: Test 159, \_SB_.PCI0.GFX0.DD08._DSS returned no values as expected. Test 160 of 169: Test _DGS (Query Graphics State). PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD01._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD02._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD03._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD04._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD05._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD06._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD07._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.PEG0.PEGP.DD08._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD01._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD02._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD03._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD04._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD05._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD06._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD07._DGS correctly returned an integer. PASSED: Test 160, \_SB_.PCI0.GFX0.DD08._DGS correctly returned an integer. Test 161 of 169: Test _DOD (Enumerate All Devices Attached to Display Adapter). Device 0: Instance: 0 Display port attachment: 0 Type of display: 4 (Internal/Integrated Digital Flat Panel) BIOS can detect device: 0 Non-VGA device: 0 Head or pipe ID: 0 PASSED: Test 161, \_SB_.PCI0.PEG0.PEGP._DOD correctly returned a sane looking package. Device 0: Instance: 0 Display port attachment: 0 Type of display: 4 (Internal/Integrated Digital Flat Panel) BIOS can detect device: 0 Non-VGA device: 0 Head or pipe ID: 0 PASSED: Test 161, \_SB_.PCI0.GFX0._DOD correctly returned a sane looking package. Test 162 of 169: Test _DOS (Enable/Disable Output Switching). PASSED: Test 162, \_SB_.PCI0.GFX0._DOS returned no values as expected. Test 163 of 169: Test _GPD (Get POST Device). SKIPPED: Test 163, Skipping test for non-existant object _GPD. Test 164 of 169: Test _ROM (Get ROM Data). SKIPPED: Test 164, Skipping test for non-existant object _ROM. Test 165 of 169: Test _SPD (Set POST Device). SKIPPED: Test 165, Skipping test for non-existant object _SPD. Test 166 of 169: Test _VPO (Video POST Options). SKIPPED: Test 166, Skipping test for non-existant object _VPO. Test 167 of 169: Test _CBA (Configuration Base Address). SKIPPED: Test 167, Skipping test for non-existant object _CBA. Test 168 of 169: Test _IFT (IPMI Interface Type). SKIPPED: Test 168, Skipping test for non-existant object _IFT. Test 169 of 169: Test _SRV (IPMI Interface Revision). SKIPPED: Test 169, Skipping test for non-existant object _SRV. ================================================================================ 362 passed, 11 failed, 1 warning, 0 aborted, 118 skipped, 0 info only. ================================================================================ 362 passed, 11 failed, 1 warning, 0 aborted, 118 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: 2 method: Detected error 'Type' when evaluating '\_SB_.ADP1._PCL'. method: Detected error 'Type' when evaluating '\_SB_.BAT1._PCL'. High failures: NONE Medium failures: 9 method: \_SB_.PCI0.PEG0.PEGP.DD02._BCM returned values, but was expected to return nothing. method: \_SB_.PCI0.GFX0.DD02._BCM returned values, but was expected to return nothing. method: \_SB_.PCI0.PEG0.PEGP.DD01._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD03._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD04._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD05._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD06._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD07._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. method: \_SB_.PCI0.PEG0.PEGP.DD08._DCS returned a NULL object, and did not return ACPI_TYPE_INTEGER. Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ method | 362| 11| | 1| 118| | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 362| 11| 0| 1| 118| 0| ---------------+-----+-----+-----+-----+-----+-----+