[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.17.0-031700-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201410060605 SMP Mon Oct 6 10:07:09 UTC 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.0-031700-generic root=UUID=2a902d4b-bf42-4c50-b02f-6c4a90a968ea ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdb9afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdb9b000-0x00000000bed3dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bed3e000-0x00000000befaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000befb0000-0x00000000befbdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000befbe000-0x00000000beffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8770w/176C, BIOS 68IAV Ver. F.50 08/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x33e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask F00000000 write-back [ 0.000000] 5 base 300000000 mask FC0000000 write-back [ 0.000000] 6 base 33E000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x33de00000-0x33dffffff] [ 0.000000] [mem 0x33de00000-0x33dffffff] page 2M [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x33c000000-0x33ddfffff] [ 0.000000] [mem 0x33c000000-0x33ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x33bffffff] [ 0.000000] [mem 0x300000000-0x33bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdb9afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbd9fffff] page 2M [ 0.000000] [mem 0xbda00000-0xbdb9afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbed3e000-0xbefaffff] [ 0.000000] [mem 0xbed3e000-0xbefaffff] page 4k [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE [ 0.000000] BRK [0x01fcd000, 0x01fcdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x35a58000-0x36d23fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2F10 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BEFFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000BEFFC000 00010C (v05 HPQOEM 176C 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BEFD6000 020987 (v02 HPQOEM 176C 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000BECF3000 000040 [ 0.000000] ACPI: HPET 0x00000000BEFFB000 000038 (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BEFFA000 0000BC (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BEFF9000 00003C (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BEFF7000 000032 (v02 HPQOEM 176C 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BEFD3000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFD2000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x00000000BEFD0000 000044 (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000BEFCF000 000038 (v00 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BEFCE000 000E42 (v01 HPQOEM ATIGFX 00000001 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFCB000 000932 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFCA000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000BEFF8000 0000A5 (v32 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033dffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x33dffffff] [ 0.000000] NODE_DATA [mem 0x33dff0000-0x33dff4fff] [ 0.000000] [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880331600000-ffff88033d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x33dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbdb9afff] [ 0.000000] node 0: [mem 0xbed3e000-0xbefaffff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x33dffffff] [ 0.000000] On node 0 totalpages: 3128746 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12089 pages used for memmap [ 0.000000] DMA32 zone: 773646 pages, LIFO batch:31 [ 0.000000] Normal zone: 36736 pages used for memmap [ 0.000000] Normal zone: 2351104 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdb9b000-0xbed3dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefb0000-0xbefbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefbe000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88033dc00000 s86720 r8192 d23872 u262144 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3079836 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.0-031700-generic root=UUID=2a902d4b-bf42-4c50-b02f-6c4a90a968ea ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12215564K/12514984K available (7846K kernel code, 1145K rwdata, 3772K rodata, 1376K init, 1308K bss, 299420K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2394.421 MHz processor [ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.84 BogoMIPS (lpj=9577684) [ 0.000039] pid_max: default: 32768 minimum: 301 [ 0.000046] ACPI: Core revision 20140724 [ 0.010452] ACPI: All ACPI Tables successfully acquired [ 0.062586] Security Framework initialized [ 0.062600] AppArmor: AppArmor initialized [ 0.062601] Yama: becoming mindful. [ 0.063637] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.067702] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.069513] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.069531] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.069775] Initializing cgroup subsys memory [ 0.069780] Initializing cgroup subsys devices [ 0.069782] Initializing cgroup subsys freezer [ 0.069784] Initializing cgroup subsys net_cls [ 0.069786] Initializing cgroup subsys blkio [ 0.069788] Initializing cgroup subsys perf_event [ 0.069790] Initializing cgroup subsys net_prio [ 0.069792] Initializing cgroup subsys hugetlb [ 0.069814] CPU: Physical Processor ID: 0 [ 0.069816] CPU: Processor Core ID: 0 [ 0.069820] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.070191] mce: CPU supports 9 MCE banks [ 0.070204] CPU0: Thermal monitoring enabled (TM1) [ 0.070215] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.070345] Freeing SMP alternatives memory: 28K (ffffffff81e78000 - ffffffff81e7f000) [ 0.071512] ftrace: allocating 32231 entries in 126 pages [ 0.087648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.127364] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.127372] TSC deadline timer enabled [ 0.127398] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.127418] ... version: 3 [ 0.127419] ... bit width: 48 [ 0.127420] ... generic registers: 4 [ 0.127421] ... value mask: 0000ffffffffffff [ 0.127422] ... max period: 0000ffffffffffff [ 0.127422] ... fixed-purpose events: 3 [ 0.127423] ... event mask: 000000070000000f [ 0.129046] x86: Booting SMP configuration: [ 0.129048] .... node #0, CPUs: #1 [ 0.142650] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.142740] #2 #3 #4 #5 #6 #7 [ 0.224491] x86: Booted up 1 node, 8 CPUs [ 0.224495] smpboot: Total of 8 processors activated (38310.73 BogoMIPS) [ 0.232295] devtmpfs: initialized [ 0.237254] evm: security.selinux [ 0.237256] evm: security.SMACK64 [ 0.237256] evm: security.SMACK64EXEC [ 0.237257] evm: security.SMACK64TRANSMUTE [ 0.237258] evm: security.SMACK64MMAP [ 0.237259] evm: security.ima [ 0.237260] evm: security.capability [ 0.237316] PM: Registering ACPI NVS region [mem 0xbefb0000-0xbefbdfff] (57344 bytes) [ 0.238171] pinctrl core: initialized pinctrl subsystem [ 0.238242] regulator-dummy: no parameters [ 0.238278] RTC time: 8:32:07, date: 10/13/14 [ 0.238358] NET: Registered protocol family 16 [ 0.238514] cpuidle: using governor ladder [ 0.238517] cpuidle: using governor menu [ 0.238571] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.238572] ACPI: bus type PCI registered [ 0.238574] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.238650] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.238652] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.238940] PCI: Using configuration type 1 for base access [ 0.239296] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.239297] mtrr: probably your BIOS does not setup all CPUs. [ 0.239298] mtrr: corrected configuration. [ 0.244519] ACPI: Added _OSI(Module Device) [ 0.244521] ACPI: Added _OSI(Processor Device) [ 0.244522] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244524] ACPI: Added _OSI(Processor Aggregator Device) [ 0.253335] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.260726] ACPI: Dynamic OEM Table Load: [ 0.260734] ACPI: SSDT 0xFFFF88032BC29000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.264334] ACPI: Dynamic OEM Table Load: [ 0.264340] ACPI: SSDT 0xFFFF88032C30D000 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.268212] ACPI: Dynamic OEM Table Load: [ 0.268217] ACPI: SSDT 0xFFFF88032C2FF800 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 2.284500] ACPI: Interpreter enabled [ 2.284507] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 2.284512] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 2.284525] ACPI: (supports S0 S3 S4 S5) [ 2.284526] ACPI: Using IOAPIC for interrupt routing [ 2.284548] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.285797] ACPI: Power Resource [APPR] (off) [ 2.291521] ACPI: Power Resource [COMP] (on) [ 2.291813] ACPI: Power Resource [LPP] (on) [ 2.294929] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.294935] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.296367] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 2.296991] PCI host bridge to bus 0000:00 [ 2.296994] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.296996] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.296998] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.297000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.297001] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 2.297003] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 2.297004] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 2.297012] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 2.297090] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 2.297122] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.297213] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 2.297235] pci 0000:00:14.0: reg 0x10: [mem 0xd4520000-0xd452ffff 64bit] [ 2.297298] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.297333] pci 0000:00:14.0: System wakeup disabled by ACPI [ 2.297376] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 2.297401] pci 0000:00:16.0: reg 0x10: [mem 0xd4535000-0xd453500f 64bit] [ 2.297478] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.297555] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.297574] pci 0000:00:19.0: reg 0x10: [mem 0xd4500000-0xd451ffff] [ 2.297583] pci 0000:00:19.0: reg 0x14: [mem 0xd453b000-0xd453bfff] [ 2.297593] pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f] [ 2.297658] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.297691] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.297734] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 2.297755] pci 0000:00:1a.0: reg 0x10: [mem 0xd453a000-0xd453a3ff] [ 2.297846] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.297881] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.297922] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 2.297939] pci 0000:00:1b.0: reg 0x10: [mem 0xd4530000-0xd4533fff 64bit] [ 2.298014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.298083] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 2.298166] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.298237] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 2.298319] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.298358] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 2.298395] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 2.298478] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.298516] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 2.298554] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 2.298636] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 2.298675] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 2.298713] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 2.298798] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.298881] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 2.298903] pci 0000:00:1d.0: reg 0x10: [mem 0xd4539000-0xd45393ff] [ 2.298994] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.299033] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.299072] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 2.299241] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 2.299260] pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f] [ 2.299268] pci 0000:00:1f.2: reg 0x14: [io 0x6074-0x6077] [ 2.299276] pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067] [ 2.299284] pci 0000:00:1f.2: reg 0x1c: [io 0x6070-0x6073] [ 2.299292] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f] [ 2.299300] pci 0000:00:1f.2: reg 0x24: [mem 0xd4538000-0xd45387ff] [ 2.299347] pci 0000:00:1f.2: PME# supported from D3hot [ 2.299412] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 2.299428] pci 0000:00:1f.3: reg 0x10: [mem 0xd4534000-0xd45340ff 64bit] [ 2.299448] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 2.299566] pci 0000:01:00.0: [1002:682d] type 00 class 0x030000 [ 2.299581] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.299591] pci 0000:01:00.0: reg 0x18: [mem 0xd4400000-0xd443ffff 64bit] [ 2.299599] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff] [ 2.299612] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 2.299646] pci 0000:01:00.0: supports D1 D2 [ 2.299648] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 2.299698] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 2.299713] pci 0000:01:00.1: reg 0x10: [mem 0xd4440000-0xd4443fff 64bit] [ 2.299775] pci 0000:01:00.1: supports D1 D2 [ 2.306909] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.306915] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.306919] pci 0000:00:01.0: bridge window [mem 0xd4400000-0xd44fffff] [ 2.306933] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.306992] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.306999] pci 0000:00:1c.0: bridge window [mem 0xd4300000-0xd43fffff] [ 2.307110] pci 0000:00:1c.1: PCI bridge to [bus 03-23] [ 2.307115] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 2.307119] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 2.307246] pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010 [ 2.307284] pci 0000:24:00.0: reg 0x10: [mem 0xd4200000-0xd42007ff] [ 2.307308] pci 0000:24:00.0: reg 0x14: [mem 0xd4205000-0xd42050ff] [ 2.307614] pci 0000:24:00.1: [197b:2392] type 00 class 0x088000 [ 2.307647] pci 0000:24:00.1: reg 0x10: [mem 0xd4204000-0xd42040ff] [ 2.307763] pci 0000:24:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 2.307944] pci 0000:24:00.2: [197b:2391] type 00 class 0x080501 [ 2.307977] pci 0000:24:00.2: reg 0x10: [mem 0xd4203000-0xd42030ff] [ 2.314961] pci 0000:00:1c.2: PCI bridge to [bus 24] [ 2.314967] pci 0000:00:1c.2: bridge window [mem 0xd4200000-0xd42fffff] [ 2.315221] pci 0000:25:00.0: [8086:0082] type 00 class 0x028000 [ 2.315405] pci 0000:25:00.0: reg 0x10: [mem 0xd4100000-0xd4101fff 64bit] [ 2.316184] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold [ 2.316336] pci 0000:25:00.0: System wakeup disabled by ACPI [ 2.323017] pci 0000:00:1c.3: PCI bridge to [bus 25] [ 2.323024] pci 0000:00:1c.3: bridge window [mem 0xd4100000-0xd41fffff] [ 2.323111] pci 0000:26:00.0: [197b:2360] type 00 class 0x010601 [ 2.323160] pci 0000:26:00.0: reg 0x10: [io 0x2018-0x201f] [ 2.323179] pci 0000:26:00.0: reg 0x14: [io 0x2024-0x2027] [ 2.323198] pci 0000:26:00.0: reg 0x18: [io 0x2010-0x2017] [ 2.323218] pci 0000:26:00.0: reg 0x1c: [io 0x2020-0x2023] [ 2.323238] pci 0000:26:00.0: reg 0x20: [io 0x2000-0x200f] [ 2.323257] pci 0000:26:00.0: reg 0x24: [mem 0xd4000000-0xd40001ff] [ 2.323277] pci 0000:26:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 2.323383] pci 0000:26:00.0: PME# supported from D3hot [ 2.330952] pci 0000:00:1c.4: PCI bridge to [bus 26] [ 2.330969] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 2.330973] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd40fffff] [ 2.331047] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.331905] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.331950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.331992] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.332034] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.332074] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.332115] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.332157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.332197] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.332483] ACPI: Enabled 4 GPEs in block 00 to 3F [ 2.332522] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 2.332611] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 2.332613] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.332615] vgaarb: loaded [ 2.332616] vgaarb: bridge control possible 0000:01:00.0 [ 2.332850] SCSI subsystem initialized [ 2.332892] libata version 3.00 loaded. [ 2.332915] ACPI: bus type USB registered [ 2.332931] usbcore: registered new interface driver usbfs [ 2.332939] usbcore: registered new interface driver hub [ 2.332956] usbcore: registered new device driver usb [ 2.333092] PCI: Using ACPI for IRQ routing [ 2.339695] PCI: pci_cache_line_size set to 64 bytes [ 2.339773] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 2.339775] e820: reserve RAM buffer [mem 0xbdb9b000-0xbfffffff] [ 2.339777] e820: reserve RAM buffer [mem 0xbefb0000-0xbfffffff] [ 2.339778] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.339779] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff] [ 2.339884] NetLabel: Initializing [ 2.339886] NetLabel: domain hash size = 128 [ 2.339887] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.339898] NetLabel: unlabeled traffic allowed by default [ 2.339961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.339966] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.342009] Switched to clocksource hpet [ 2.347194] AppArmor: AppArmor Filesystem Enabled [ 2.347227] pnp: PnP ACPI init [ 2.347401] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.347404] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 2.347406] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.347408] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.347409] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.347411] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.347413] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.347415] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.347417] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.347420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.347532] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 2.347598] system 00:02: [io 0x0200-0x027f] has been reserved [ 2.347600] system 00:02: [io 0x1000-0x100f] has been reserved [ 2.347602] system 00:02: [io 0xffff] has been reserved [ 2.347604] system 00:02: [io 0xffff] has been reserved [ 2.347606] system 00:02: [io 0x0400-0x047f] could not be reserved [ 2.347607] system 00:02: [io 0x0500-0x057f] has been reserved [ 2.347609] system 00:02: [io 0xef80-0xef9f] has been reserved [ 2.347612] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.347644] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.347976] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 2.348249] pnp 00:05: [dma 0 disabled] [ 2.348309] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 2.348334] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 2.348359] pnp 00:07: Plug and Play ACPI device, IDs SYN018d SYN0100 SYN0002 PNP0f13 (active) [ 2.348694] pnp: PnP ACPI: found 8 devices [ 2.355190] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 2.355193] pci 0000:24:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 2.355196] pci 0000:26:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 2.355219] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000 [ 2.355245] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 2.355253] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.355255] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4460000-0xd447ffff pref] [ 2.355257] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.355259] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.355262] pci 0000:00:01.0: bridge window [mem 0xd4400000-0xd44fffff] [ 2.355265] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.355268] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.355273] pci 0000:00:1c.0: bridge window [mem 0xd4300000-0xd43fffff] [ 2.355281] pci 0000:00:1c.1: PCI bridge to [bus 03-23] [ 2.355284] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 2.355290] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 2.355294] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.355301] pci 0000:24:00.1: BAR 6: assigned [mem 0xd4208000-0xd420ffff pref] [ 2.355303] pci 0000:00:1c.2: PCI bridge to [bus 24] [ 2.355308] pci 0000:00:1c.2: bridge window [mem 0xd4200000-0xd42fffff] [ 2.355317] pci 0000:00:1c.3: PCI bridge to [bus 25] [ 2.355322] pci 0000:00:1c.3: bridge window [mem 0xd4100000-0xd41fffff] [ 2.355331] pci 0000:26:00.0: BAR 6: assigned [mem 0xd4010000-0xd401ffff pref] [ 2.355333] pci 0000:00:1c.4: PCI bridge to [bus 26] [ 2.355336] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 2.355341] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd40fffff] [ 2.355351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.355352] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.355354] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.355356] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff] [ 2.355357] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 2.355359] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 2.355360] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 2.355362] pci_bus 0000:01: resource 1 [mem 0xd4400000-0xd44fffff] [ 2.355364] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.355365] pci_bus 0000:02: resource 1 [mem 0xd4300000-0xd43fffff] [ 2.355367] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] [ 2.355369] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd3ffffff] [ 2.355370] pci_bus 0000:03: resource 2 [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.355372] pci_bus 0000:24: resource 1 [mem 0xd4200000-0xd42fffff] [ 2.355374] pci_bus 0000:25: resource 1 [mem 0xd4100000-0xd41fffff] [ 2.355375] pci_bus 0000:26: resource 0 [io 0x2000-0x2fff] [ 2.355377] pci_bus 0000:26: resource 1 [mem 0xd4000000-0xd40fffff] [ 2.355403] NET: Registered protocol family 2 [ 2.355609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.355836] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.355967] TCP: Hash tables configured (established 131072 bind 65536) [ 2.355981] TCP: reno registered [ 2.355998] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 2.356051] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 2.356127] NET: Registered protocol family 1 [ 2.356148] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 2.356250] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.356251] pci 0000:00:14.0: PCI INT A: no GSI [ 2.356374] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.356790] pci 0000:01:00.0: Video device with shadowed ROM [ 2.356812] PCI: CLS 64 bytes, default 64 [ 2.356857] Trying to unpack rootfs image as initramfs... [ 2.664357] Freeing initrd memory: 19248K (ffff880035a58000 - ffff880036d24000) [ 2.664383] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.664386] software IO TLB [mem 0xb9b9b000-0xbdb9b000] (64MB) mapped at [ffff8800b9b9b000-ffff8800bdb9afff] [ 2.664723] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff] [ 2.664724] ------------[ cut here ]------------ [ 2.664729] WARNING: CPU: 0 PID: 1 at /home/apw/COD/linux/arch/x86/mm/ioremap.c:183 __ioremap_caller+0x264/0x2e0() [ 2.664731] Info: mapping multiple BARs. Your kernel is fine. [ 2.664732] Modules linked in: [ 2.664735] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-031700-generic #201410060605 [ 2.664737] Hardware name: Hewlett-Packard HP EliteBook 8770w/176C, BIOS 68IAV Ver. F.50 08/04/2014 [ 2.664738] 00000000000000b7 ffff88032c5cfa68 ffffffff81796bd7 0000000000001cd8 [ 2.664741] ffff88032c5cfab8 ffff88032c5cfaa8 ffffffff81074a3c ffff88032c5cfac8 [ 2.664743] 0000000000000010 00000000fed10000 0000000000006000 ffff88032a1ee240 [ 2.664745] Call Trace: [ 2.664751] [] dump_stack+0x46/0x58 [ 2.664754] [] warn_slowpath_common+0x8c/0xc0 [ 2.664756] [] warn_slowpath_fmt+0x46/0x50 [ 2.664759] [] __ioremap_caller+0x264/0x2e0 [ 2.664761] [] ioremap_nocache+0x17/0x20 [ 2.664765] [] snb_uncore_imc_init_box+0x6c/0xa0 [ 2.664767] [] uncore_pci_probe+0xd8/0x1c0 [ 2.664770] [] local_pci_probe+0x4e/0xa0 [ 2.664772] [] ? pci_match_device+0xe5/0x110 [ 2.664775] [] __pci_device_probe+0xb9/0xf0 [ 2.664777] [] pci_device_probe+0x3a/0x60 [ 2.664779] [] really_probe+0x91/0x380 [ 2.664781] [] driver_probe_device+0x47/0xa0 [ 2.664783] [] __driver_attach+0xab/0xb0 [ 2.664785] [] ? driver_probe_device+0xa0/0xa0 [ 2.664789] [] bus_for_each_dev+0x5e/0x90 [ 2.664791] [] driver_attach+0x1e/0x20 [ 2.664794] [] bus_add_driver+0x124/0x260 [ 2.664796] [] driver_register+0x64/0xf0 [ 2.664798] [] __pci_register_driver+0x4c/0x50 [ 2.664800] [] uncore_pci_init+0x143/0x168 [ 2.664802] [] ? uncore_cpumask_init+0xf9/0xf9 [ 2.664803] [] intel_uncore_init+0x27/0x72 [ 2.664805] [] ? uncore_cpumask_init+0xf9/0xf9 [ 2.664808] [] do_one_initcall+0xd7/0x200 [ 2.664811] [] ? parse_args+0x60/0x210 [ 2.664814] [] ? do_early_param+0x87/0x87 [ 2.664817] [] do_basic_setup+0x96/0xb9 [ 2.664820] [] ? do_early_param+0x87/0x87 [ 2.664822] [] ? sched_init_smp+0x114/0x116 [ 2.664825] [] kernel_init_freeable+0xd8/0x151 [ 2.664828] [] ? rest_init+0x80/0x80 [ 2.664831] [] kernel_init+0xe/0xf0 [ 2.664833] [] ret_from_fork+0x7c/0xb0 [ 2.664835] [] ? rest_init+0x80/0x80 [ 2.664840] ---[ end trace 2498582e84caabe2 ]--- [ 2.664892] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 2.664942] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664948] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664958] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664966] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664974] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664982] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664990] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x16 [ 2.664998] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x16 [ 2.665055] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.665080] Scanning for low memory corruption every 60 seconds [ 2.665425] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.665449] Initialise system trusted keyring [ 2.665469] audit: initializing netlink subsys (disabled) [ 2.665483] audit: type=2000 audit(1413189129.596:1): initialized [ 2.665873] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.667288] zpool: loaded [ 2.667292] zbud: loaded [ 2.667449] VFS: Disk quotas dquot_6.5.2 [ 2.667482] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.667910] fuse init (API version 7.23) [ 2.667994] msgmni has been set to 23896 [ 2.668051] Key type big_key registered [ 2.668466] Key type asymmetric registered [ 2.668468] Asymmetric key parser 'x509' registered [ 2.668500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.668552] io scheduler noop registered [ 2.668555] io scheduler deadline registered (default) [ 2.668582] io scheduler cfq registered [ 2.668787] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.668954] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.669128] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 2.669308] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 2.669479] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X [ 2.669646] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X [ 2.669732] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.669734] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.669736] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 2.669738] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 2.669757] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.669761] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.669778] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 2.669782] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 2.669800] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 2.669802] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt [ 2.669803] pci 0000:24:00.1: Signaling PME through PCIe PME interrupt [ 2.669804] pci 0000:24:00.2: Signaling PME through PCIe PME interrupt [ 2.669809] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 2.669826] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 2.669827] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt [ 2.669831] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 2.669850] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.669851] pci 0000:26:00.0: Signaling PME through PCIe PME interrupt [ 2.669855] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.669871] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.669911] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ [ 2.669950] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 2.669954] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.670005] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 2.670006] vesafb: scrolling: redraw [ 2.670007] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 2.670023] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k [ 2.782772] Console: switching to colour frame buffer device 240x67 [ 2.895029] fb0: VESA VGA frame buffer device [ 2.895054] intel_idle: MWAIT substates: 0x21120 [ 2.895055] intel_idle: v0.4 model 0x3A [ 2.895056] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.895518] ACPI: AC Adapter [AC] (on-line) [ 2.895691] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.895695] ACPI: Sleep Button [SLPB] [ 2.895730] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.895749] ACPI: Lid Switch [LID] [ 2.895785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.895787] ACPI: Power Button [PWRF] [ 2.921910] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.921912] ACPI: Thermal Zone [CPUZ] (56 C) [ 2.947888] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.947890] ACPI: Thermal Zone [GFXZ] (50 C) [ 2.962819] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.962821] ACPI: Thermal Zone [EXTZ] (0 C) [ 2.978805] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.978806] ACPI: Thermal Zone [LOCZ] (42 C) [ 2.993843] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.993845] ACPI: Thermal Zone [BATZ] (28 C) [ 2.994124] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.994126] ACPI: Thermal Zone [PCHZ] (127 C) [ 2.994158] GHES: HEST is not enabled! [ 2.994258] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.015017] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.017521] Linux agpgart interface v0.103 [ 3.018437] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.040127] ACPI: Battery Slot [BAT0] (battery present) [ 3.040206] ACPI: Battery Slot [BAT1] (battery absent) [ 3.230884] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 3.232722] brd: module loaded [ 3.233345] loop: module loaded [ 3.233608] libphy: Fixed MDIO Bus: probed [ 3.233611] tun: Universal TUN/TAP device driver, 1.6 [ 3.233612] tun: (C) 1999-2004 Max Krasnyansky [ 3.233693] PPP generic driver version 2.4.2 [ 3.233743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.233753] ehci-pci: EHCI PCI platform driver [ 3.233924] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.233931] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.233945] ehci-pci 0000:00:1a.0: debug port 2 [ 3.237852] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.237868] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd453a000 [ 3.246806] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.246855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.246857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.246858] usb usb1: Product: EHCI Host Controller [ 3.246860] usb usb1: Manufacturer: Linux 3.17.0-031700-generic ehci_hcd [ 3.246861] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.247046] hub 1-0:1.0: USB hub found [ 3.247054] hub 1-0:1.0: 3 ports detected [ 3.247332] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.247337] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.247349] ehci-pci 0000:00:1d.0: debug port 2 [ 3.251258] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.251263] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4539000 [ 3.262881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.262959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.262962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.262963] usb usb2: Product: EHCI Host Controller [ 3.262965] usb usb2: Manufacturer: Linux 3.17.0-031700-generic ehci_hcd [ 3.262966] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.263184] hub 2-0:1.0: USB hub found [ 3.263192] hub 2-0:1.0: 3 ports detected [ 3.263380] ehci-platform: EHCI generic platform driver [ 3.263396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.263404] ohci-pci: OHCI PCI platform driver [ 3.263417] ohci-platform: OHCI generic platform driver [ 3.263430] uhci_hcd: USB Universal Host Controller Interface driver [ 3.263569] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 3.263571] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 3.263599] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.263605] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.263704] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.263730] xhci_hcd 0000:00:14.0: irq 30 for MSI/MSI-X [ 3.263800] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.263802] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.263804] usb usb3: Product: xHCI Host Controller [ 3.263805] usb usb3: Manufacturer: Linux 3.17.0-031700-generic xhci_hcd [ 3.263807] usb usb3: SerialNumber: 0000:00:14.0 [ 3.264003] hub 3-0:1.0: USB hub found [ 3.264015] hub 3-0:1.0: 4 ports detected [ 3.264355] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.264359] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.264408] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.264410] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.264411] usb usb4: Product: xHCI Host Controller [ 3.264413] usb usb4: Manufacturer: Linux 3.17.0-031700-generic xhci_hcd [ 3.264414] usb usb4: SerialNumber: 0000:00:14.0 [ 3.264601] hub 4-0:1.0: USB hub found [ 3.264612] hub 4-0:1.0: 4 ports detected [ 3.264986] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.266774] i8042: Detected active multiplexing controller, rev 1.1 [ 3.267595] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.267600] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.267626] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.267646] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.267664] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.267901] mousedev: PS/2 mouse device common for all mice [ 3.268264] rtc_cmos 00:03: RTC can wake from S4 [ 3.268450] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.268480] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.268560] device-mapper: uevent: version 1.0.3 [ 3.268628] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.268645] Intel P-state driver initializing. [ 3.268879] ledtrig-cpu: registered to indicate activity on CPUs [ 3.268961] TCP: cubic registered [ 3.269033] NET: Registered protocol family 10 [ 3.269267] NET: Registered protocol family 17 [ 3.269277] Key type dns_resolver registered [ 3.269588] Loading compiled-in X.509 certificates [ 3.270177] Loaded X.509 cert 'Magrathea: Glacier signing key: 6675fb01472a1f12081eaf42b96d179446afc578' [ 3.270190] registered taskstats version 1 [ 3.271873] Key type trusted registered [ 3.273599] Key type encrypted registered [ 3.275368] AppArmor: AppArmor sha1 policy hashing enabled [ 3.293758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.322981] tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value [ 3.323441] ima: No TPM chip found, activating TPM-bypass! [ 3.323483] evm: HMAC attrs: 0x1 [ 3.324045] Magic number: 2:326:523 [ 3.324191] rtc_cmos 00:03: setting system clock to 2014-10-13 08:32:10 UTC (1413189130) [ 3.324359] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.324361] EDD information not available. [ 3.324425] PM: Hibernation image not present or could not be loaded. [ 3.325318] Freeing unused kernel memory: 1376K (ffffffff81d20000 - ffffffff81e78000) [ 3.325319] Write protecting the kernel read-only data: 12288k [ 3.326081] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000) [ 3.326679] Freeing unused kernel memory: 324K (ffff880001baf000 - ffff880001c00000) [ 3.335098] systemd-udevd[143]: starting version 208 [ 3.335474] random: systemd-udevd urandom read with 12 bits of entropy available [ 3.350318] pps_core: LinuxPPS API ver. 1 registered [ 3.350320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.351402] PTP clock support registered [ 3.351583] sdhci: Secure Digital Host Controller Interface driver [ 3.351585] sdhci: Copyright(c) Pierre Ossman [ 3.352526] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30) [ 3.352620] sdhci-pci 0000:24:00.1: No vmmc regulator found [ 3.352621] sdhci-pci 0000:24:00.1: No vqmmc regulator found [ 3.352728] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA [ 3.352740] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30) [ 3.352780] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface. [ 3.354049] ahci 0000:00:1f.2: version 3.0 [ 3.354217] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X [ 3.354238] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.354370] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.354372] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 3.366932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1d impl SATA mode [ 3.366937] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 3.391786] scsi host0: ahci [ 3.392006] scsi host1: ahci [ 3.392198] scsi host2: ahci [ 3.392404] scsi host3: ahci [ 3.392523] scsi host4: ahci [ 3.392636] scsi host5: ahci [ 3.392674] ata1: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538100 irq 31 [ 3.392675] ata2: DUMMY [ 3.392677] ata3: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538200 irq 31 [ 3.392680] ata4: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538280 irq 31 [ 3.392681] ata5: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538300 irq 31 [ 3.392682] ata6: DUMMY [ 3.392853] ahci 0000:26:00.0: irq 32 for MSI/MSI-X [ 3.392945] ahci 0000:26:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 3.392947] ahci 0000:26:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.392962] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.392995] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X [ 3.393123] scsi host6: ahci [ 3.393163] ata7: SATA max UDMA/133 abar m512@0xd4000000 port 0xd4000100 irq 32 [ 3.419130] firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 3.475268] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.491499] usb 4-1: New USB device found, idVendor=0424, idProduct=5434 [ 3.491502] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.491503] usb 4-1: Product: USB5534 [ 3.491504] usb 4-1: Manufacturer: SMSC [ 3.491505] usb 4-1: SerialNumber: 1239567 [ 3.491863] hub 4-1:1.0: USB hub found [ 3.491887] hub 4-1:1.0: 4 ports detected [ 3.601620] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.601624] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 84:34:97:23:75:10 [ 3.601625] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.601669] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 3.603158] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.663228] tsc: Refined TSC clocksource calibration: 2394.556 MHz [ 3.711288] ata7: SATA link down (SStatus 0 SControl 300) [ 3.711290] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.711996] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.712230] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.712233] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 3.712234] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.712578] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.712728] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.712733] ata1.00: configured for UDMA/133 [ 3.719525] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 3.719922] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 3.719966] sd 0:0:0:0: [sda] Write Protect is off [ 3.719968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.719977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.719979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.721174] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 3.721773] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.735630] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.735637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.736018] hub 1-1:1.0: USB hub found [ 3.736091] hub 1-1:1.0: 6 ports detected [ 3.847451] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.919644] firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 3.979966] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.979974] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.980358] hub 2-1:1.0: USB hub found [ 3.980436] hub 2-1:1.0: 8 ports detected [ 4.039557] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.044729] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.044741] ata3.00: ATAPI: hp DVDRAM GT50N, MP01, max UDMA/100 [ 4.051873] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.051882] ata3.00: configured for UDMA/100 [ 4.057636] scsi 2:0:0:0: CD-ROM hp DVDRAM GT50N MP01 PQ: 0 ANSI: 5 [ 4.076224] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.076232] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.076439] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.076668] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 4.147726] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 4.276073] usb 3-1: New USB device found, idVendor=0424, idProduct=5434 [ 4.276088] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.276510] hub 3-1:1.0: USB hub found [ 4.276553] hub 3-1:1.0: 4 ports detected [ 4.395868] ata4: SATA link down (SStatus 0 SControl 300) [ 4.443928] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 4.531684] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 4.574688] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b [ 4.574696] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.574700] usb 3-2: Product: USB Receiver [ 4.574703] usb 3-2: Manufacturer: Logitech [ 4.578099] hidraw: raw HID events driver (C) Jiri Kosina [ 4.582672] usbcore: registered new interface driver usbhid [ 4.582673] usbhid: USB HID core driver [ 4.584607] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 4.641595] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input12 [ 4.641807] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-2:1 [ 4.643537] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input13 [ 4.643868] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:2 [ 4.664345] Switched to clocksource tsc [ 4.716125] ata5: SATA link down (SStatus 0 SControl 300) [ 4.740110] usb 3-3: new high-speed USB device number 4 using xhci_hcd [ 4.771899] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 4.868888] usb 3-3: New USB device found, idVendor=0204, idProduct=6025 [ 4.868890] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.868892] usb 3-3: Product: Flash Disk [ 4.868893] usb 3-3: SerialNumber: 25015000EE054911 [ 4.925837] init: plymouth-upstart-bridge main process (240) terminated with status 1 [ 4.925847] init: plymouth-upstart-bridge main process ended, respawning [ 4.926972] init: plymouth-upstart-bridge main process (260) terminated with status 1 [ 4.926980] init: plymouth-upstart-bridge main process ended, respawning [ 4.935346] init: plymouth-upstart-bridge main process ended, respawning [ 4.936508] init: plymouth-upstart-bridge main process (267) terminated with status 1 [ 4.936519] init: plymouth-upstart-bridge main process ended, respawning [ 4.937417] init: plymouth-upstart-bridge main process (269) terminated with status 1 [ 4.937426] init: plymouth-upstart-bridge main process ended, respawning [ 4.938260] init: plymouth-upstart-bridge main process (270) terminated with status 1 [ 4.938269] init: plymouth-upstart-bridge main process ended, respawning [ 4.939178] init: plymouth-upstart-bridge main process (272) terminated with status 1 [ 4.939186] init: plymouth-upstart-bridge main process ended, respawning [ 4.940019] init: plymouth-upstart-bridge main process (273) terminated with status 1 [ 4.940028] init: plymouth-upstart-bridge main process ended, respawning [ 4.940357] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 4.940962] init: plymouth-upstart-bridge main process (275) terminated with status 1 [ 4.940974] init: plymouth-upstart-bridge main process ended, respawning [ 4.941958] init: plymouth-upstart-bridge main process (276) terminated with status 1 [ 4.941967] init: plymouth-upstart-bridge main process ended, respawning [ 4.943015] init: plymouth-upstart-bridge main process (278) terminated with status 1 [ 4.943023] init: plymouth-upstart-bridge respawning too fast, stopped [ 4.948364] init: plymouth main process (264) killed by SEGV signal [ 4.987311] Adding 17407996k swap on /dev/sda8. Priority:-1 extents:1 across:17407996k SSFS [ 5.058240] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 5.080645] systemd-udevd[412]: starting version 208 [ 5.081724] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b230 [ 5.081727] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 5.081730] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 5.081732] usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd. [ 5.081733] usb 1-1.3: SerialNumber: SN0001 [ 5.089121] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00, board id: 2009, fw id: 1119621 [ 5.133557] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 5.134674] lp: driver loaded but no devices found [ 5.134685] random: nonblocking pool is initialized [ 5.137713] ppdev: user-space parallel port driver [ 5.140351] parport_pc 00:05: reported by Plug and Play ACPI [ 5.140426] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 5.156534] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 5.164325] init: plymouth-log main process (462) terminated with status 1 [ 5.223076] media: Linux media interface: v0.10 [ 5.223293] Initializing HPQ6001 module [ 5.223352] input: HP Wireless hotkeys as /devices/virtual/input/input14 [ 5.223992] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.227575] mei_me 0000:00:16.0: irq 34 for MSI/MSI-X [ 5.227689] Linux video capture interface: v2.00 [ 5.228582] audit: type=1400 audit(1413189132.399:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=531 comm="apparmor_parser" [ 5.228586] audit: type=1400 audit(1413189132.399:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=531 comm="apparmor_parser" [ 5.236557] lp0: using parport0 (interrupt-driven). [ 5.238808] Bluetooth: Core ver 2.19 [ 5.238821] NET: Registered protocol family 31 [ 5.238822] Bluetooth: HCI device and connection manager initialized [ 5.238827] Bluetooth: HCI socket layer initialized [ 5.238829] Bluetooth: L2CAP socket layer initialized [ 5.238833] Bluetooth: SCO socket layer initialized [ 5.244161] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.244164] Bluetooth: BNEP filters: protocol multicast [ 5.244172] Bluetooth: BNEP socket layer initialized [ 5.244551] Bluetooth: RFCOMM TTY layer initialized [ 5.244558] Bluetooth: RFCOMM socket layer initialized [ 5.244562] Bluetooth: RFCOMM ver 1.11 [ 5.245012] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 5.247062] init: cups main process (543) killed by HUP signal [ 5.247069] init: cups main process ended, respawning [ 5.252239] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1 [ 5.252243] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.252245] usb 2-1.6: Product: BCM20702A0 [ 5.252246] usb 2-1.6: Manufacturer: Broadcom Corp [ 5.252248] usb 2-1.6: SerialNumber: 083E8E9A105C [ 5.262775] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 5.274934] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258) [ 5.274942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.274946] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258) [ 5.274949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.274951] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258) [ 5.274954] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.274955] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258) [ 5.274958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.274959] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.276044] audit: type=1400 audit(1413189132.443:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=614 comm="apparmor_parser" [ 5.276050] audit: type=1400 audit(1413189132.443:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser" [ 5.276054] audit: type=1400 audit(1413189132.443:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser" [ 5.281866] [drm] Initialized drm 1.1.0 20060810 [ 5.286534] cfg80211: Calling CRDA to update world regulatory domain [ 5.286975] usb-storage 3-3:1.0: USB Mass Storage device detected [ 5.288666] scsi host7: usb-storage 3-3:1.0 [ 5.288760] usbcore: registered new interface driver usb-storage [ 5.289133] hp_accel: laptop model unknown, using default axes configuration [ 5.289573] wmi: Mapper loaded [ 5.291422] usbcore: registered new interface driver uas [ 5.307189] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 5.307193] Copyright(c) 2003- 2014 Intel Corporation [ 5.321457] AVX version of gcm_enc/dec engaged. [ 5.331421] [drm] radeon kernel modesetting enabled. [ 5.331473] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 5.331474] fb: switching to radeondrmfb from VESA VGA [ 5.331495] Console: switching to colour dummy device 80x25 [ 5.341790] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X [ 5.341882] iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5.341929] iwlwifi 0000:25:00.0: irq 36 for MSI/MSI-X [ 5.343033] [drm] initializing kernel modesetting (VERDE 0x1002:0x682D 0x103C:0x176C). [ 5.343043] [drm] register mmio base: 0xD4400000 [ 5.343045] [drm] register mmio size: 262144 [ 5.343107] ATOM BIOS: HP/IEC [ 5.343259] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 5.343262] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 5.343264] [drm] Detected VRAM RAM=1024M, BAR=256M [ 5.343265] [drm] RAM width 128bits DDR [ 5.343378] acpi device:01: registered as cooling_device8 [ 5.343924] [TTM] Zone kernel: Available graphics memory: 6118438 kiB [ 5.343925] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.343926] [TTM] Initializing pool allocator [ 5.343931] [TTM] Initializing DMA pool allocator [ 5.343948] [drm] radeon: 1024M of VRAM memory ready [ 5.343949] [drm] radeon: 1024M of GTT memory ready. [ 5.343958] [drm] Loading verde Microcode [ 5.344399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input15 [ 5.345896] iwlwifi 0000:25:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 5.351294] [drm] Internal thermal controller without fan control [ 5.351373] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e [ 5.359432] [drm] radeon: dpm initialized [ 5.360129] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.360895] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e [ 5.360900] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0 [ 5.361659] sound hdaudioC0D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 5.361662] sound hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 5.361663] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 5.361664] sound hdaudioC0D0: mono: mono_out=0x0 [ 5.361665] sound hdaudioC0D0: inputs: [ 5.361667] sound hdaudioC0D0: Mic=0xc [ 5.361668] sound hdaudioC0D0: Internal Mic=0x11 [ 5.361669] sound hdaudioC0D0: Line=0xf [ 5.368429] intel_rapl: Found RAPL domain package [ 5.368433] intel_rapl: Found RAPL domain core [ 5.372884] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 5.372887] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 5.372889] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 5.372892] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 5.372944] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 5.389181] cfg80211: World regulatory domain updated: [ 5.389185] cfg80211: DFS Master region: unset [ 5.389186] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 5.389189] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.389191] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.389193] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.389195] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.389197] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.393422] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.403439] usbcore: registered new interface driver btusb [ 5.409632] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 5.409692] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 5.409754] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 5.409812] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 5.415997] init: failsafe main process (686) killed by TERM signal [ 5.455926] audit: type=1400 audit(1413189132.623:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=862 comm="apparmor_parser" [ 5.455931] audit: type=1400 audit(1413189132.623:8): apparmor="STATUS" operation="profile_load" name="chromium" pid=862 comm="apparmor_parser" [ 5.457021] audit: type=1400 audit(1413189132.627:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=862 comm="apparmor_parser" [ 5.457024] audit: type=1400 audit(1413189132.627:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=862 comm="apparmor_parser" [ 5.482066] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21 [ 5.482153] usbcore: registered new interface driver uvcvideo [ 5.482155] USB Video Class driver (1.1.1) [ 5.751631] init: plymouth-stop pre-start process (1314) terminated with status 1 [ 6.588266] scsi 7:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2 [ 6.588524] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 6.588642] sd 7:0:0:0: [sdb] 1978368 512-byte logical blocks: (1.01 GB/966 MiB) [ 6.588756] sd 7:0:0:0: [sdb] Write Protect is off [ 6.588760] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 6.588879] sd 7:0:0:0: [sdb] No Caching mode page found [ 6.588884] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 6.590031] sdb: sdb1 [ 6.590808] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 6.594271] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 6.594381] radeon 0000:01:00.0: WB enabled [ 6.594384] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88031d5abc00 [ 6.594385] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88031d5abc04 [ 6.594387] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88031d5abc08 [ 6.594388] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88031d5abc0c [ 6.594389] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88031d5abc10 [ 6.594902] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90013135a18 [ 6.594904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.594905] [drm] Driver supports precise vblank timestamp query. [ 6.594921] radeon 0000:01:00.0: irq 37 for MSI/MSI-X [ 6.594931] radeon 0000:01:00.0: radeon: using MSI. [ 6.594955] [drm] radeon: irq initialized. [ 7.041879] [drm] ring test on 0 succeeded in 1 usecs [ 7.041884] [drm] ring test on 1 succeeded in 1 usecs [ 7.041887] [drm] ring test on 2 succeeded in 1 usecs [ 7.041901] [drm] ring test on 3 succeeded in 4 usecs [ 7.041907] [drm] ring test on 4 succeeded in 1 usecs [ 7.072939] systemd-logind[1337]: Watching system buttons on /dev/input/event2 (Power Button) [ 7.072986] systemd-logind[1337]: Watching system buttons on /dev/input/event9 (Video Bus) [ 7.073026] systemd-logind[1337]: Watching system buttons on /dev/input/event1 (Lid Switch) [ 7.073065] systemd-logind[1337]: Watching system buttons on /dev/input/event0 (Sleep Button) [ 7.073079] systemd-logind[1337]: New seat seat0. [ 7.227648] [drm] ring test on 5 succeeded in 2 usecs [ 7.227653] [drm] UVD initialized successfully. [ 7.227831] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.227871] [drm] ib test on ring 1 succeeded in 0 usecs [ 7.227906] [drm] ib test on ring 2 succeeded in 0 usecs [ 7.227960] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.227997] [drm] ib test on ring 4 succeeded in 1 usecs [ 7.378651] [drm] ib test on ring 5 succeeded [ 7.434423] [drm] radeon atom DIG backlight initialized [ 7.434454] [drm] Radeon Display Connectors [ 7.434456] [drm] Connector 0: [ 7.434457] [drm] LVDS-1 [ 7.434458] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 7.434459] [drm] Encoders: [ 7.434460] [drm] LCD1: INTERNAL_UNIPHY [ 7.434460] [drm] Connector 1: [ 7.434461] [drm] DP-1 [ 7.434462] [drm] HPD1 [ 7.434463] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 7.434463] [drm] Encoders: [ 7.434464] [drm] DFP1: INTERNAL_UNIPHY1 [ 7.434465] [drm] Connector 2: [ 7.434465] [drm] DP-2 [ 7.434466] [drm] HPD2 [ 7.434467] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 7.434468] [drm] Encoders: [ 7.434469] [drm] DFP2: INTERNAL_UNIPHY1 [ 7.434469] [drm] Connector 3: [ 7.434470] [drm] DP-3 [ 7.434470] [drm] HPD3 [ 7.434471] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 7.434472] [drm] Encoders: [ 7.434473] [drm] DFP3: INTERNAL_UNIPHY2 [ 7.434474] [drm] Connector 4: [ 7.434474] [drm] VGA-1 [ 7.434475] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 7.434476] [drm] Encoders: [ 7.434477] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.559379] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X [ 7.614767] lis3lv02d: 8 bits 3DC sensor found [ 7.614848] input: HP WMI hotkeys as /devices/virtual/input/input16 [ 7.662586] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X [ 7.662734] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.664483] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 7.671528] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0 [ 7.939184] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 7.945825] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0 [ 8.025135] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.477608] [drm] fb mappable at 0xC0479000 [ 8.477611] [drm] vram apper at 0xC0000000 [ 8.477612] [drm] size 9216000 [ 8.477612] [drm] fb depth is 24 [ 8.477613] [drm] pitch is 7680 [ 8.477715] fbcon: radeondrmfb (fb0) is primary device [ 8.610300] Console: switching to colour frame buffer device 240x67 [ 8.613570] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 8.613571] radeon 0000:01:00.0: registered panic notifier [ 8.619768] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0 [ 8.619879] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 8.619890] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 8.620010] snd_hda_intel 0000:01:00.1: irq 38 for MSI/MSI-X [ 8.627249] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 8.627317] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 8.627391] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24 [ 8.627454] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25 [ 8.627518] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26 [ 8.627582] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27 [ 8.642585] init: plymouth-splash main process (1383) terminated with status 1 [ 9.027805] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28 [ 9.501948] systemd-logind[1337]: Failed to start unit user@112.service: Unknown unit: user@112.service [ 9.501954] systemd-logind[1337]: Failed to start user service: Unknown unit: user@112.service [ 9.504971] systemd-logind[1337]: New session c1 of user lightdm. [ 9.504986] systemd-logind[1337]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display. [ 10.590345] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.590380] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.834473] systemd-logind[1337]: Failed to start unit user@1000.service: Unknown unit: user@1000.service [ 16.834479] systemd-logind[1337]: Failed to start user service: Unknown unit: user@1000.service [ 16.837487] systemd-logind[1337]: New session c2 of user matej. [ 16.837505] systemd-logind[1337]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. [ 18.117402] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 35.312416] audit_printk_skb: 51 callbacks suppressed [ 35.312419] audit: type=1400 audit(1413189162.463:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=3186 comm="apparmor_parser" [ 35.312422] audit: type=1400 audit(1413189162.463:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=3186 comm="apparmor_parser" [ 50.440545] sdb: detected capacity change from 1012924416 to 0 [ 55.563824] usb 3-3: USB disconnect, device number 4 [ 190.748200] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 190.877017] usb 3-4: New USB device found, idVendor=152d, idProduct=0569 [ 190.877025] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 190.877029] usb 3-4: Product: USB to ATA/ATAPI Bridge [ 190.877032] usb 3-4: Manufacturer: JMicron [ 190.877035] usb 3-4: SerialNumber: 4A3337343030383448584B595845 [ 190.877693] usb-storage 3-4:1.0: USB Mass Storage device detected [ 190.880663] scsi host8: usb-storage 3-4:1.0 [ 191.881078] scsi 8:0:0:0: Direct-Access Hitachi HTS727575A9E364 PQ: 0 ANSI: 5 [ 191.881792] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 191.881846] sd 8:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 191.882427] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 191.882888] sd 8:0:0:0: [sdb] Asking for cache data failed [ 191.882894] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 192.577075] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 192.577154] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 192.577163] usb 3-4: hub failed to enable device, error -22 [ 192.689018] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 192.689089] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 192.689099] usb 3-4: hub failed to enable device, error -22 [ 192.800977] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 192.817405] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 192.817414] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 192.937305] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 192.937384] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 192.937394] usb 3-4: hub failed to enable device, error -22 [ 193.049091] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.049161] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 193.049171] usb 3-4: hub failed to enable device, error -22 [ 193.161113] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.177610] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 193.177619] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 193.297312] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.297394] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 193.297404] usb 3-4: hub failed to enable device, error -22 [ 193.409180] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.409259] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 193.409269] usb 3-4: hub failed to enable device, error -22 [ 193.521239] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.537663] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 193.537674] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 193.657440] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.657518] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 193.657528] usb 3-4: hub failed to enable device, error -22 [ 193.769369] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.769447] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 193.769457] usb 3-4: hub failed to enable device, error -22 [ 193.881342] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 193.897721] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 193.897732] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 194.017430] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.017454] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.017458] usb 3-4: hub failed to enable device, error -22 [ 194.129475] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.129550] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.129560] usb 3-4: hub failed to enable device, error -22 [ 194.241496] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.258049] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 194.258058] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 194.377749] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.377830] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.377839] usb 3-4: hub failed to enable device, error -22 [ 194.489567] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.489645] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.489654] usb 3-4: hub failed to enable device, error -22 [ 194.601598] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.618189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 194.618199] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 194.618395] sd 8:0:0:0: [sdb] [ 194.618401] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 194.618406] sd 8:0:0:0: [sdb] CDB: [ 194.618410] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 194.618427] end_request: I/O error, dev sdb, sector 0 [ 194.618435] Buffer I/O error on device sdb, logical block 0 [ 194.785888] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.785967] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.785977] usb 3-4: hub failed to enable device, error -22 [ 194.897735] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 194.897811] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 194.897821] usb 3-4: hub failed to enable device, error -22 [ 195.009764] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.026235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 195.026247] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 195.146038] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.146115] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.146125] usb 3-4: hub failed to enable device, error -22 [ 195.257865] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.257945] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.257955] usb 3-4: hub failed to enable device, error -22 [ 195.369915] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.386445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 195.386455] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 195.506167] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.506241] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.506250] usb 3-4: hub failed to enable device, error -22 [ 195.617866] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.617900] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.617908] usb 3-4: hub failed to enable device, error -22 [ 195.729961] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.746419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 195.746427] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 195.866207] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.866349] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.866360] usb 3-4: hub failed to enable device, error -22 [ 195.978130] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 195.978205] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 195.978215] usb 3-4: hub failed to enable device, error -22 [ 196.090106] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.106594] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 196.106604] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 196.226389] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.226458] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 196.226468] usb 3-4: hub failed to enable device, error -22 [ 196.338263] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.338330] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 196.338339] usb 3-4: hub failed to enable device, error -22 [ 196.450291] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.470841] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 196.470849] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 196.590489] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.590584] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 196.590594] usb 3-4: hub failed to enable device, error -22 [ 196.702341] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.702396] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 196.702408] usb 3-4: hub failed to enable device, error -22 [ 196.814302] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.830867] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 196.830876] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 196.831031] sd 8:0:0:0: [sdb] [ 196.831034] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 196.831037] sd 8:0:0:0: [sdb] CDB: [ 196.831039] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 196.831053] end_request: I/O error, dev sdb, sector 0 [ 196.831059] Buffer I/O error on device sdb, logical block 0 [ 196.998599] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 196.998687] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 196.998701] usb 3-4: hub failed to enable device, error -22 [ 197.110508] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.110577] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 197.110587] usb 3-4: hub failed to enable device, error -22 [ 197.222447] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.239032] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 197.239038] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 197.358772] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.358847] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 197.358857] usb 3-4: hub failed to enable device, error -22 [ 197.470625] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.470704] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 197.470713] usb 3-4: hub failed to enable device, error -22 [ 197.582659] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.599265] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 197.599274] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 197.718852] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.718923] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 197.718932] usb 3-4: hub failed to enable device, error -22 [ 197.830742] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.830812] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 197.830822] usb 3-4: hub failed to enable device, error -22 [ 197.942796] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 197.959220] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 197.959229] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 198.079000] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.079071] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.079081] usb 3-4: hub failed to enable device, error -22 [ 198.190875] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.190945] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.190955] usb 3-4: hub failed to enable device, error -22 [ 198.302919] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.319352] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 198.319362] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 198.439078] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.439154] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.439164] usb 3-4: hub failed to enable device, error -22 [ 198.551056] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.551128] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.551138] usb 3-4: hub failed to enable device, error -22 [ 198.663036] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.679605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 198.679613] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 198.799217] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.799287] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.799297] usb 3-4: hub failed to enable device, error -22 [ 198.911143] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 198.911223] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 198.911232] usb 3-4: hub failed to enable device, error -22 [ 199.023138] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.039724] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 199.039733] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 199.039935] sd 8:0:0:0: [sdb] [ 199.039942] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 199.039946] sd 8:0:0:0: [sdb] CDB: [ 199.039948] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 199.039962] end_request: I/O error, dev sdb, sector 0 [ 199.039968] Buffer I/O error on device sdb, logical block 0 [ 199.207342] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.207412] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 199.207422] usb 3-4: hub failed to enable device, error -22 [ 199.319246] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.319316] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 199.319326] usb 3-4: hub failed to enable device, error -22 [ 199.431228] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.447881] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 199.447890] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 199.567485] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.567553] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 199.567563] usb 3-4: hub failed to enable device, error -22 [ 199.679367] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.679433] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 199.679442] usb 3-4: hub failed to enable device, error -22 [ 199.791411] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.807959] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 199.807968] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 199.927789] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 199.927873] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 199.927883] usb 3-4: hub failed to enable device, error -22 [ 200.039497] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.039574] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 200.039584] usb 3-4: hub failed to enable device, error -22 [ 200.151585] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.168155] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 200.168164] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 200.287820] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.287903] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 200.287912] usb 3-4: hub failed to enable device, error -22 [ 200.399683] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.399752] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 200.399762] usb 3-4: hub failed to enable device, error -22 [ 200.511647] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.528187] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 200.528196] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 200.647945] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.648012] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 200.648022] usb 3-4: hub failed to enable device, error -22 [ 200.759730] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.759778] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 200.759790] usb 3-4: hub failed to enable device, error -22 [ 200.871829] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 200.888294] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 200.888303] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 201.007930] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.007968] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.007989] usb 3-4: hub failed to enable device, error -22 [ 201.119851] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.119929] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.119942] usb 3-4: hub failed to enable device, error -22 [ 201.231927] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.248449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 201.248457] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 201.248602] sd 8:0:0:0: [sdb] [ 201.248606] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 201.248609] sd 8:0:0:0: [sdb] CDB: [ 201.248611] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 201.248625] end_request: I/O error, dev sdb, sector 0 [ 201.248631] Buffer I/O error on device sdb, logical block 0 [ 201.416216] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.416287] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.416297] usb 3-4: hub failed to enable device, error -22 [ 201.528061] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.528143] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.528153] usb 3-4: hub failed to enable device, error -22 [ 201.640015] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.656558] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 201.656567] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 201.776228] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.776294] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.776303] usb 3-4: hub failed to enable device, error -22 [ 201.888198] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 201.888285] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 201.888296] usb 3-4: hub failed to enable device, error -22 [ 202.000188] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.016769] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 202.016777] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 202.136313] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.136399] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.136408] usb 3-4: hub failed to enable device, error -22 [ 202.248216] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.248302] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.248310] usb 3-4: hub failed to enable device, error -22 [ 202.360336] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.376844] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 202.376853] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 202.496526] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.496595] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.496605] usb 3-4: hub failed to enable device, error -22 [ 202.608423] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.608497] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.608508] usb 3-4: hub failed to enable device, error -22 [ 202.720451] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.736949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 202.736958] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 202.856687] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.856763] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.856772] usb 3-4: hub failed to enable device, error -22 [ 202.968522] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 202.968590] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 202.968599] usb 3-4: hub failed to enable device, error -22 [ 203.080549] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.096897] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 203.096904] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 203.216655] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.216693] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 203.216699] usb 3-4: hub failed to enable device, error -22 [ 203.328616] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.328696] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 203.328703] usb 3-4: hub failed to enable device, error -22 [ 203.440649] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.456907] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 203.456923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 203.457076] sd 8:0:0:0: [sdb] [ 203.457078] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 203.457080] sd 8:0:0:0: [sdb] CDB: [ 203.457082] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 203.457090] end_request: I/O error, dev sdb, sector 0 [ 203.457094] Buffer I/O error on device sdb, logical block 0 [ 203.568768] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.568795] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 203.568802] usb 3-4: hub failed to enable device, error -22 [ 203.680742] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.680822] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 203.680834] usb 3-4: hub failed to enable device, error -22 [ 203.792783] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.809111] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 203.809122] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 203.929018] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 203.929095] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 203.929104] usb 3-4: hub failed to enable device, error -22 [ 204.040886] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.040955] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 204.040965] usb 3-4: hub failed to enable device, error -22 [ 204.152954] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.169525] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 204.169534] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 204.289160] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.289237] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 204.289247] usb 3-4: hub failed to enable device, error -22 [ 204.401013] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.401082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 204.401092] usb 3-4: hub failed to enable device, error -22 [ 204.513068] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.529591] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 204.529600] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 204.649258] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.649327] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 204.649337] usb 3-4: hub failed to enable device, error -22 [ 204.761124] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.761208] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 204.761218] usb 3-4: hub failed to enable device, error -22 [ 204.873086] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 204.889416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 204.889424] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 205.009479] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.009556] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.009566] usb 3-4: hub failed to enable device, error -22 [ 205.121314] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.121347] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.121367] usb 3-4: hub failed to enable device, error -22 [ 205.233353] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.249802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 205.249812] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 205.369531] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.369605] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.369613] usb 3-4: hub failed to enable device, error -22 [ 205.481467] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.481543] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.481551] usb 3-4: hub failed to enable device, error -22 [ 205.593430] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.609950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 205.609958] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 205.610105] sd 8:0:0:0: [sdb] [ 205.610108] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 205.610111] sd 8:0:0:0: [sdb] CDB: [ 205.610114] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 205.610127] end_request: I/O error, dev sdb, sector 0 [ 205.610133] Buffer I/O error on device sdb, logical block 0 [ 205.777700] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.777771] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.777781] usb 3-4: hub failed to enable device, error -22 [ 205.889556] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 205.889600] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 205.889610] usb 3-4: hub failed to enable device, error -22 [ 206.001558] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.018150] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 206.018160] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 206.137828] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.137908] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.137918] usb 3-4: hub failed to enable device, error -22 [ 206.249725] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.249796] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.249806] usb 3-4: hub failed to enable device, error -22 [ 206.361695] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.378281] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 206.378290] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 206.497967] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.498045] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.498056] usb 3-4: hub failed to enable device, error -22 [ 206.609782] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.609863] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.609873] usb 3-4: hub failed to enable device, error -22 [ 206.721859] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.738376] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 206.738385] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 206.858091] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.858170] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.858180] usb 3-4: hub failed to enable device, error -22 [ 206.969916] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 206.969981] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 206.969990] usb 3-4: hub failed to enable device, error -22 [ 207.081890] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.098405] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 207.098412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 207.218067] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.218098] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 207.218106] usb 3-4: hub failed to enable device, error -22 [ 207.329986] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.330028] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 207.330037] usb 3-4: hub failed to enable device, error -22 [ 207.441961] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.458558] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 207.458563] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 207.578231] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.578306] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 207.578315] usb 3-4: hub failed to enable device, error -22 [ 207.690180] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.690259] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 207.690267] usb 3-4: hub failed to enable device, error -22 [ 207.802157] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.818732] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 207.818741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 207.818883] sd 8:0:0:0: [sdb] [ 207.818886] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 207.818889] sd 8:0:0:0: [sdb] CDB: [ 207.818892] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 207.818904] end_request: I/O error, dev sdb, sector 0 [ 207.818911] Buffer I/O error on device sdb, logical block 0 [ 207.986396] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 207.986438] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 207.986449] usb 3-4: hub failed to enable device, error -22 [ 208.098260] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.098341] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 208.098350] usb 3-4: hub failed to enable device, error -22 [ 208.210418] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.226944] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 208.226953] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 208.346616] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.346687] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 208.346697] usb 3-4: hub failed to enable device, error -22 [ 208.458515] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.458596] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 208.458605] usb 3-4: hub failed to enable device, error -22 [ 208.570504] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.586871] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 208.586879] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 208.706623] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.706686] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 208.706695] usb 3-4: hub failed to enable device, error -22 [ 208.818656] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.818723] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 208.818732] usb 3-4: hub failed to enable device, error -22 [ 208.934614] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 208.950863] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 208.950872] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 209.070796] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.070871] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.070880] usb 3-4: hub failed to enable device, error -22 [ 209.182701] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.182771] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.182781] usb 3-4: hub failed to enable device, error -22 [ 209.294772] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.311266] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 209.311275] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 209.431077] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.431145] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.431156] usb 3-4: hub failed to enable device, error -22 [ 209.542765] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.542848] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.542858] usb 3-4: hub failed to enable device, error -22 [ 209.654865] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.671344] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 209.671352] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 209.791106] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.791176] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.791186] usb 3-4: hub failed to enable device, error -22 [ 209.902900] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 209.902970] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 209.902980] usb 3-4: hub failed to enable device, error -22 [ 210.014956] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.031564] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 210.031571] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 210.031795] sd 8:0:0:0: [sdb] [ 210.031801] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 210.031804] sd 8:0:0:0: [sdb] CDB: [ 210.031807] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 210.031818] end_request: I/O error, dev sdb, sector 0 [ 210.031824] Buffer I/O error on device sdb, logical block 0 [ 210.031858] ldm_validate_partition_table(): Disk read failed. [ 210.199165] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.199232] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 210.199240] usb 3-4: hub failed to enable device, error -22 [ 210.311061] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.311122] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 210.311130] usb 3-4: hub failed to enable device, error -22 [ 210.423143] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.439626] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 210.439635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 210.559331] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.559403] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 210.559413] usb 3-4: hub failed to enable device, error -22 [ 210.671206] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.671253] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 210.671267] usb 3-4: hub failed to enable device, error -22 [ 210.783264] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.799731] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 210.799739] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 210.919449] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 210.919515] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 210.919528] usb 3-4: hub failed to enable device, error -22 [ 211.031345] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.031416] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.031425] usb 3-4: hub failed to enable device, error -22 [ 211.143388] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.159911] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 211.159920] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 211.279684] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.279764] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.279774] usb 3-4: hub failed to enable device, error -22 [ 211.391455] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.391539] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.391548] usb 3-4: hub failed to enable device, error -22 [ 211.503521] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.520030] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 211.520039] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 211.639690] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.639759] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.639769] usb 3-4: hub failed to enable device, error -22 [ 211.751604] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.751684] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.751694] usb 3-4: hub failed to enable device, error -22 [ 211.863637] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.880187] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 211.880196] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 211.999888] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 211.999957] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 211.999966] usb 3-4: hub failed to enable device, error -22 [ 212.111745] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.111815] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 212.111825] usb 3-4: hub failed to enable device, error -22 [ 212.223774] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.240327] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 212.240337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 212.240565] sd 8:0:0:0: [sdb] [ 212.240572] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 212.240576] sd 8:0:0:0: [sdb] CDB: [ 212.240578] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 212.240591] end_request: I/O error, dev sdb, sector 0 [ 212.240598] Buffer I/O error on device sdb, logical block 0 [ 212.407985] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.408065] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 212.408074] usb 3-4: hub failed to enable device, error -22 [ 212.519870] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.519937] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 212.519947] usb 3-4: hub failed to enable device, error -22 [ 212.631908] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.648487] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 212.648496] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 212.768032] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.768098] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 212.768107] usb 3-4: hub failed to enable device, error -22 [ 212.880045] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 212.880115] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 212.880125] usb 3-4: hub failed to enable device, error -22 [ 212.992059] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.008541] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 213.008549] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 213.128237] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.128315] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.128325] usb 3-4: hub failed to enable device, error -22 [ 213.240171] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.240256] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.240268] usb 3-4: hub failed to enable device, error -22 [ 213.352152] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.368356] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 213.368364] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 213.488435] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.488506] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.488516] usb 3-4: hub failed to enable device, error -22 [ 213.600251] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.600327] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.600336] usb 3-4: hub failed to enable device, error -22 [ 213.712356] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.728779] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 213.728788] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 213.848523] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.848596] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.848606] usb 3-4: hub failed to enable device, error -22 [ 213.960452] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 213.960542] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 213.960552] usb 3-4: hub failed to enable device, error -22 [ 214.072397] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.089020] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 214.089029] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 214.208600] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.208665] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 214.208674] usb 3-4: hub failed to enable device, error -22 [ 214.320522] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.320594] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 214.320603] usb 3-4: hub failed to enable device, error -22 [ 214.432536] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.449135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 214.449144] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 214.449385] sd 8:0:0:0: [sdb] [ 214.449391] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 214.449395] sd 8:0:0:0: [sdb] CDB: [ 214.449397] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 214.449410] end_request: I/O error, dev sdb, sector 0 [ 214.449417] Buffer I/O error on device sdb, logical block 0 [ 214.616811] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.616884] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 214.616894] usb 3-4: hub failed to enable device, error -22 [ 214.728658] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.728739] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 214.728749] usb 3-4: hub failed to enable device, error -22 [ 214.840680] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.857191] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 214.857200] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 214.976975] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 214.977058] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 214.977069] usb 3-4: hub failed to enable device, error -22 [ 215.088776] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.088846] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 215.088857] usb 3-4: hub failed to enable device, error -22 [ 215.200817] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.217318] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 215.217327] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 215.337021] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.337098] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 215.337108] usb 3-4: hub failed to enable device, error -22 [ 215.448856] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.448925] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 215.448935] usb 3-4: hub failed to enable device, error -22 [ 215.560938] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.577445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 215.577453] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 215.697198] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.697277] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 215.697286] usb 3-4: hub failed to enable device, error -22 [ 215.808942] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.809014] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 215.809023] usb 3-4: hub failed to enable device, error -22 [ 215.920985] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 215.937559] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 215.937567] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 216.057267] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.057342] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.057352] usb 3-4: hub failed to enable device, error -22 [ 216.169170] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.169249] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.169259] usb 3-4: hub failed to enable device, error -22 [ 216.281217] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.297700] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 216.297709] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 216.417379] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.417447] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.417456] usb 3-4: hub failed to enable device, error -22 [ 216.529325] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.529394] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.529405] usb 3-4: hub failed to enable device, error -22 [ 216.641294] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.657842] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 216.657850] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 216.658064] sd 8:0:0:0: [sdb] [ 216.658071] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 216.658077] sd 8:0:0:0: [sdb] CDB: [ 216.658080] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 216.658096] end_request: I/O error, dev sdb, sector 0 [ 216.658105] Buffer I/O error on device sdb, logical block 0 [ 216.825507] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.825580] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.825590] usb 3-4: hub failed to enable device, error -22 [ 216.937396] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 216.937468] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 216.937478] usb 3-4: hub failed to enable device, error -22 [ 217.049436] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.065964] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 217.065972] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 217.185685] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.185763] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 217.185772] usb 3-4: hub failed to enable device, error -22 [ 217.297591] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.297671] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 217.297681] usb 3-4: hub failed to enable device, error -22 [ 217.409576] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.425980] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 217.425989] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 217.545701] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.545780] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 217.545790] usb 3-4: hub failed to enable device, error -22 [ 217.657666] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.657737] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 217.657747] usb 3-4: hub failed to enable device, error -22 [ 217.769705] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.786201] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 217.786209] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 217.905952] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 217.906028] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 217.906039] usb 3-4: hub failed to enable device, error -22 [ 218.017802] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.017879] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 218.017889] usb 3-4: hub failed to enable device, error -22 [ 218.129859] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.146139] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 218.146148] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 218.266142] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.266213] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 218.266223] usb 3-4: hub failed to enable device, error -22 [ 218.377925] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.378005] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 218.378014] usb 3-4: hub failed to enable device, error -22 [ 218.489931] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.506511] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 218.506520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 218.626088] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.626158] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 218.626168] usb 3-4: hub failed to enable device, error -22 [ 218.738009] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.738086] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 218.738096] usb 3-4: hub failed to enable device, error -22 [ 218.850017] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 218.866563] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 218.866574] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 218.866724] sd 8:0:0:0: [sdb] [ 218.866727] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 218.866731] sd 8:0:0:0: [sdb] CDB: [ 218.866733] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 218.866746] end_request: I/O error, dev sdb, sector 0 [ 218.866753] Buffer I/O error on device sdb, logical block 0 [ 218.866805] Dev sdb: unable to read RDB block 0 [ 219.034300] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.034371] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.034381] usb 3-4: hub failed to enable device, error -22 [ 219.146167] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.146246] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.146256] usb 3-4: hub failed to enable device, error -22 [ 219.258242] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.274752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 219.274761] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 219.394413] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.394489] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.394499] usb 3-4: hub failed to enable device, error -22 [ 219.506303] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.506381] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.506391] usb 3-4: hub failed to enable device, error -22 [ 219.618361] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.634833] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 219.634842] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 219.754631] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.754702] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.754712] usb 3-4: hub failed to enable device, error -22 [ 219.866476] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.866555] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 219.866565] usb 3-4: hub failed to enable device, error -22 [ 219.978497] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 219.994938] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 219.994946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 220.114775] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.114855] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.114864] usb 3-4: hub failed to enable device, error -22 [ 220.226533] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.226598] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.226607] usb 3-4: hub failed to enable device, error -22 [ 220.338552] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.355094] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 220.355105] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 220.474809] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.474886] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.474896] usb 3-4: hub failed to enable device, error -22 [ 220.586723] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.586801] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.586811] usb 3-4: hub failed to enable device, error -22 [ 220.698707] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.715241] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 220.715251] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 220.834957] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.835034] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.835045] usb 3-4: hub failed to enable device, error -22 [ 220.946796] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 220.946840] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 220.946852] usb 3-4: hub failed to enable device, error -22 [ 221.058801] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.075323] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 221.075337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 221.075499] sd 8:0:0:0: [sdb] [ 221.075505] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 221.075510] sd 8:0:0:0: [sdb] CDB: [ 221.075513] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 221.075531] end_request: I/O error, dev sdb, sector 0 [ 221.075540] Buffer I/O error on device sdb, logical block 0 [ 221.243161] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.243232] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 221.243242] usb 3-4: hub failed to enable device, error -22 [ 221.355005] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.355075] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 221.355085] usb 3-4: hub failed to enable device, error -22 [ 221.466998] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.483488] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 221.483497] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 221.603241] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.603320] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 221.603329] usb 3-4: hub failed to enable device, error -22 [ 221.715088] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.715162] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 221.715173] usb 3-4: hub failed to enable device, error -22 [ 221.827162] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.843670] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 221.843679] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 221.963336] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 221.963413] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 221.963423] usb 3-4: hub failed to enable device, error -22 [ 222.075211] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.075288] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 222.075298] usb 3-4: hub failed to enable device, error -22 [ 222.187231] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.203616] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 222.203627] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 222.323428] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.323502] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 222.323513] usb 3-4: hub failed to enable device, error -22 [ 222.435367] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.435443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 222.435456] usb 3-4: hub failed to enable device, error -22 [ 222.547387] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.563917] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 222.563926] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 222.683560] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.683629] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 222.683639] usb 3-4: hub failed to enable device, error -22 [ 222.795473] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.795551] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 222.795560] usb 3-4: hub failed to enable device, error -22 [ 222.907485] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 222.923963] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 222.923970] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 223.043614] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.043652] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.043664] usb 3-4: hub failed to enable device, error -22 [ 223.155597] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.155679] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.155688] usb 3-4: hub failed to enable device, error -22 [ 223.267613] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.284114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 223.284123] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 223.284269] sd 8:0:0:0: [sdb] [ 223.284273] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 223.284276] sd 8:0:0:0: [sdb] CDB: [ 223.284278] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 223.284291] end_request: I/O error, dev sdb, sector 0 [ 223.284297] Buffer I/O error on device sdb, logical block 0 [ 223.451811] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.451883] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.451893] usb 3-4: hub failed to enable device, error -22 [ 223.563724] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.563802] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.563812] usb 3-4: hub failed to enable device, error -22 [ 223.675787] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.692259] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 223.692268] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 223.811991] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.812057] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.812066] usb 3-4: hub failed to enable device, error -22 [ 223.923856] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 223.923924] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 223.923934] usb 3-4: hub failed to enable device, error -22 [ 224.035917] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.052360] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 224.052369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 224.172123] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.172195] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 224.172206] usb 3-4: hub failed to enable device, error -22 [ 224.283923] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.283994] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 224.284005] usb 3-4: hub failed to enable device, error -22 [ 224.396042] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.412539] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 224.412548] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 224.532217] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.532293] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 224.532303] usb 3-4: hub failed to enable device, error -22 [ 224.644062] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.644137] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 224.644147] usb 3-4: hub failed to enable device, error -22 [ 224.756164] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.772746] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 224.772754] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 224.892386] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 224.892461] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 224.892472] usb 3-4: hub failed to enable device, error -22 [ 225.004169] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.004245] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 225.004254] usb 3-4: hub failed to enable device, error -22 [ 225.116272] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.132799] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 225.132808] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 225.252466] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.252544] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 225.252555] usb 3-4: hub failed to enable device, error -22 [ 225.364337] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.364412] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 225.364422] usb 3-4: hub failed to enable device, error -22 [ 225.476362] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.492876] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 225.492884] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 225.493087] sd 8:0:0:0: [sdb] [ 225.493093] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 225.493097] sd 8:0:0:0: [sdb] CDB: [ 225.493099] Read(10): 28 00 00 00 00 18 00 00 08 00 [ 225.493111] end_request: I/O error, dev sdb, sector 24 [ 225.493119] Buffer I/O error on device sdb, logical block 3 [ 225.660650] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.660718] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 225.660728] usb 3-4: hub failed to enable device, error -22 [ 225.772472] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.772543] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 225.772553] usb 3-4: hub failed to enable device, error -22 [ 225.884562] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 225.901022] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 225.901032] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 226.020668] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.020747] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.020757] usb 3-4: hub failed to enable device, error -22 [ 226.132648] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.132722] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.132730] usb 3-4: hub failed to enable device, error -22 [ 226.244696] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.261126] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 226.261135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 226.380754] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.380814] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.380823] usb 3-4: hub failed to enable device, error -22 [ 226.492759] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.492830] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.492840] usb 3-4: hub failed to enable device, error -22 [ 226.604833] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.621361] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 226.621370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 226.740994] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.741059] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.741068] usb 3-4: hub failed to enable device, error -22 [ 226.852870] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.852946] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 226.852956] usb 3-4: hub failed to enable device, error -22 [ 226.964943] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 226.981492] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 226.981501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 227.101021] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.101099] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.101109] usb 3-4: hub failed to enable device, error -22 [ 227.212951] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.213040] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.213049] usb 3-4: hub failed to enable device, error -22 [ 227.325001] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.341554] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 227.341561] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 227.461249] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.461327] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.461337] usb 3-4: hub failed to enable device, error -22 [ 227.573107] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.573187] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.573197] usb 3-4: hub failed to enable device, error -22 [ 227.685097] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.701586] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 227.701595] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 227.701737] sd 8:0:0:0: [sdb] [ 227.701741] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 227.701744] sd 8:0:0:0: [sdb] CDB: [ 227.701746] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 227.701760] end_request: I/O error, dev sdb, sector 0 [ 227.701766] Buffer I/O error on device sdb, logical block 0 [ 227.869453] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.869527] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.869537] usb 3-4: hub failed to enable device, error -22 [ 227.981236] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 227.981305] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 227.981315] usb 3-4: hub failed to enable device, error -22 [ 228.093287] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.109660] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 228.109668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 228.229490] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.229532] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 228.229546] usb 3-4: hub failed to enable device, error -22 [ 228.341363] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.341432] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 228.341442] usb 3-4: hub failed to enable device, error -22 [ 228.453435] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.469960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 228.469969] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 228.589623] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.589693] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 228.589703] usb 3-4: hub failed to enable device, error -22 [ 228.701548] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.701694] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 228.701706] usb 3-4: hub failed to enable device, error -22 [ 228.813491] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.830051] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 228.830062] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 228.949786] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 228.949863] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 228.949873] usb 3-4: hub failed to enable device, error -22 [ 229.061724] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.061800] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 229.061810] usb 3-4: hub failed to enable device, error -22 [ 229.173706] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.190178] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 229.190187] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 229.309850] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.309917] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 229.309926] usb 3-4: hub failed to enable device, error -22 [ 229.421737] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.421808] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 229.421817] usb 3-4: hub failed to enable device, error -22 [ 229.533754] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.550277] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 229.550283] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 229.670071] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.670149] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 229.670159] usb 3-4: hub failed to enable device, error -22 [ 229.781911] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.781986] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 229.781995] usb 3-4: hub failed to enable device, error -22 [ 229.893916] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 229.910424] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 229.910433] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 229.910677] sd 8:0:0:0: [sdb] [ 229.910684] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 229.910688] sd 8:0:0:0: [sdb] CDB: [ 229.910690] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 229.910703] end_request: I/O error, dev sdb, sector 0 [ 229.910710] Buffer I/O error on device sdb, logical block 0 [ 229.910759] sdb: unable to read partition table [ 229.912590] sd 8:0:0:0: [sdb] Attached SCSI disk [ 230.338192] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.338262] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 230.338272] usb 3-4: hub failed to enable device, error -22 [ 230.450106] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.450188] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 230.450198] usb 3-4: hub failed to enable device, error -22 [ 230.562180] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.578669] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 230.578678] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 230.698431] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.698509] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 230.698519] usb 3-4: hub failed to enable device, error -22 [ 230.810237] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.810310] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 230.810320] usb 3-4: hub failed to enable device, error -22 [ 230.922326] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 230.938781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 230.938790] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 231.058491] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.058565] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 231.058576] usb 3-4: hub failed to enable device, error -22 [ 231.170368] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.170443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 231.170453] usb 3-4: hub failed to enable device, error -22 [ 231.282402] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.298940] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 231.298949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048 [ 231.418636] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.418687] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 231.418698] usb 3-4: hub failed to enable device, error -22 [ 231.530452] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.530520] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 231.530530] usb 3-4: hub failed to enable device, error -22 [ 231.642548] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [ 231.659105] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556000 [ 231.659114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b8556048