[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-17-generic (buildd@batsu) (gcc version 4.9.1 (Ubuntu 4.9.1-15ubuntu1) ) #23-Ubuntu SMP Fri Sep 19 16:58:18 UTC 2014 (Ubuntu 3.16.0-17.23-generic 3.16.3) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdb9afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdb9b000-0x00000000bed3dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bed3e000-0x00000000befaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000befb0000-0x00000000befbdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000befbe000-0x00000000beffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8770w/176C, BIOS 68IAV Ver. F.43 10/08/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x33e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask F00000000 write-back [ 0.000000] 5 base 300000000 mask FC0000000 write-back [ 0.000000] 6 base 33E000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x33de00000-0x33dffffff] [ 0.000000] [mem 0x33de00000-0x33dffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x33c000000-0x33ddfffff] [ 0.000000] [mem 0x33c000000-0x33ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x33bffffff] [ 0.000000] [mem 0x300000000-0x33bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdb9afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbd9fffff] page 2M [ 0.000000] [mem 0xbda00000-0xbdb9afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbed3e000-0xbefaffff] [ 0.000000] [mem 0xbed3e000-0xbefaffff] page 4k [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7eb18000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2F10 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BEFFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000BEFFC000 00010C (v05 HPQOEM 176C 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BEFD6000 020792 (v02 HPQOEM 176C 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000BECF3000 000040 [ 0.000000] ACPI: HPET 0x00000000BEFFB000 000038 (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BEFFA000 0000BC (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BEFF9000 00003C (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BEFF7000 000032 (v02 HPQOEM 176C 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BEFD3000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFD2000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x00000000BEFD0000 000044 (v01 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000BEFCF000 000038 (v00 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BEFCE000 000E42 (v01 HPQOEM ATIGFX 00000001 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFCB000 000932 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BEFCA000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000BEFF8000 0000A5 (v32 HPQOEM 176C 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033dffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x33dffffff] [ 0.000000] NODE_DATA [mem 0x33dff0000-0x33dff4fff] [ 0.000000] [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880331600000-ffff88033d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x33dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbdb9afff] [ 0.000000] node 0: [mem 0xbed3e000-0xbefaffff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x33dffffff] [ 0.000000] On node 0 totalpages: 3128746 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12089 pages used for memmap [ 0.000000] DMA32 zone: 773646 pages, LIFO batch:31 [ 0.000000] Normal zone: 36736 pages used for memmap [ 0.000000] Normal zone: 2351104 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdb9b000-0xbed3dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefb0000-0xbefbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefbe000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88033dc00000 s87360 r8192 d23232 u262144 [ 0.000000] pcpu-alloc: s87360 r8192 d23232 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3079836 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12213364K/12514984K available (7729K kernel code, 1199K rwdata, 3608K rodata, 1360K init, 1308K bss, 301620K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2394.369 MHz processor [ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.73 BogoMIPS (lpj=9577476) [ 0.000039] pid_max: default: 32768 minimum: 301 [ 0.000047] ACPI: Core revision 20140424 [ 0.010049] ACPI: All ACPI Tables successfully acquired [ 0.062382] Security Framework initialized [ 0.062400] AppArmor: AppArmor initialized [ 0.062401] Yama: becoming mindful. [ 0.063401] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.067457] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.069253] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.069270] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.069530] Initializing cgroup subsys memory [ 0.069551] Initializing cgroup subsys devices [ 0.069557] Initializing cgroup subsys freezer [ 0.069560] Initializing cgroup subsys net_cls [ 0.069564] Initializing cgroup subsys blkio [ 0.069567] Initializing cgroup subsys perf_event [ 0.069587] Initializing cgroup subsys net_prio [ 0.069593] Initializing cgroup subsys hugetlb [ 0.069615] CPU: Physical Processor ID: 0 [ 0.069616] CPU: Processor Core ID: 0 [ 0.069621] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.069994] mce: CPU supports 9 MCE banks [ 0.070006] CPU0: Thermal monitoring enabled (TM1) [ 0.070018] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 2 [ 0.070144] Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000) [ 0.071427] ftrace: allocating 29287 entries in 115 pages [ 0.085743] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.125458] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.125465] TSC deadline timer enabled [ 0.125489] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.125508] ... version: 3 [ 0.125509] ... bit width: 48 [ 0.125510] ... generic registers: 4 [ 0.125511] ... value mask: 0000ffffffffffff [ 0.125512] ... max period: 0000ffffffffffff [ 0.125512] ... fixed-purpose events: 3 [ 0.125513] ... event mask: 000000070000000f [ 0.127250] x86: Booting SMP configuration: [ 0.127252] .... node #0, CPUs: #1 [ 0.140850] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.140937] #2 #3 #4 #5 #6 #7 [ 0.222281] x86: Booted up 1 node, 8 CPUs [ 0.222285] smpboot: Total of 8 processors activated (38309.90 BogoMIPS) [ 0.229650] devtmpfs: initialized [ 0.233726] evm: security.selinux [ 0.233728] evm: security.SMACK64 [ 0.233728] evm: security.SMACK64EXEC [ 0.233729] evm: security.SMACK64TRANSMUTE [ 0.233730] evm: security.SMACK64MMAP [ 0.233731] evm: security.ima [ 0.233732] evm: security.capability [ 0.233786] PM: Registering ACPI NVS region [mem 0xbefb0000-0xbefbdfff] (57344 bytes) [ 0.234596] pinctrl core: initialized pinctrl subsystem [ 0.234669] regulator-dummy: no parameters [ 0.234704] RTC time: 9:05:26, date: 10/06/14 [ 0.234755] NET: Registered protocol family 16 [ 0.234901] cpuidle: using governor ladder [ 0.234905] cpuidle: using governor menu [ 0.234953] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.234954] ACPI: bus type PCI registered [ 0.234956] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.235035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.235037] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.235331] PCI: Using configuration type 1 for base access [ 0.237866] ACPI: Added _OSI(Module Device) [ 0.237868] ACPI: Added _OSI(Processor Device) [ 0.237869] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.237871] ACPI: Added _OSI(Processor Aggregator Device) [ 0.246301] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.254092] ACPI: Dynamic OEM Table Load: [ 0.254101] ACPI: SSDT 0xFFFF88032C100000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.257686] ACPI: Dynamic OEM Table Load: [ 0.257692] ACPI: SSDT 0xFFFF88032C0F9000 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.261578] ACPI: Dynamic OEM Table Load: [ 0.261583] ACPI: SSDT 0xFFFF88032BCD4000 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 2.278051] ACPI: Interpreter enabled [ 2.278059] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 2.278063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 2.278077] ACPI: (supports S0 S3 S4 S5) [ 2.278078] ACPI: Using IOAPIC for interrupt routing [ 2.278098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.279302] ACPI: Power Resource [APPR] (off) [ 2.284858] ACPI: Power Resource [COMP] (on) [ 2.285140] ACPI: Power Resource [LPP] (on) [ 2.288126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.288132] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.289518] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 2.290103] PCI host bridge to bus 0000:00 [ 2.290106] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.290108] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.290110] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.290111] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.290113] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 2.290114] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 2.290115] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 2.290123] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 2.290202] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 2.290235] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.290324] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 2.290346] pci 0000:00:14.0: reg 0x10: [mem 0xd4520000-0xd452ffff 64bit] [ 2.290409] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.290443] pci 0000:00:14.0: System wakeup disabled by ACPI [ 2.290483] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 2.290507] pci 0000:00:16.0: reg 0x10: [mem 0xd4535000-0xd453500f 64bit] [ 2.290584] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.290660] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.290679] pci 0000:00:19.0: reg 0x10: [mem 0xd4500000-0xd451ffff] [ 2.290688] pci 0000:00:19.0: reg 0x14: [mem 0xd453b000-0xd453bfff] [ 2.290698] pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f] [ 2.290762] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.290795] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.290835] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 2.290857] pci 0000:00:1a.0: reg 0x10: [mem 0xd453a000-0xd453a3ff] [ 2.290948] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.290986] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.291026] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 2.291043] pci 0000:00:1b.0: reg 0x10: [mem 0xd4530000-0xd4533fff 64bit] [ 2.291120] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.291188] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 2.291271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.291340] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 2.291423] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.291461] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 2.291496] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 2.291579] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.291616] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 2.291651] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 2.291734] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 2.291771] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 2.291807] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 2.291890] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.291967] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 2.291990] pci 0000:00:1d.0: reg 0x10: [mem 0xd4539000-0xd45393ff] [ 2.292083] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.292119] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.292157] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 2.292329] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 2.292349] pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f] [ 2.292357] pci 0000:00:1f.2: reg 0x14: [io 0x6074-0x6077] [ 2.292366] pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067] [ 2.292374] pci 0000:00:1f.2: reg 0x1c: [io 0x6070-0x6073] [ 2.292382] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f] [ 2.292390] pci 0000:00:1f.2: reg 0x24: [mem 0xd4538000-0xd45387ff] [ 2.292436] pci 0000:00:1f.2: PME# supported from D3hot [ 2.292498] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 2.292515] pci 0000:00:1f.3: reg 0x10: [mem 0xd4534000-0xd45340ff 64bit] [ 2.292536] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 2.292652] pci 0000:01:00.0: [1002:682d] type 00 class 0x030000 [ 2.292666] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.292677] pci 0000:01:00.0: reg 0x18: [mem 0xd4400000-0xd443ffff 64bit] [ 2.292684] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff] [ 2.292697] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 2.292731] pci 0000:01:00.0: supports D1 D2 [ 2.292732] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 2.292781] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 2.292795] pci 0000:01:00.1: reg 0x10: [mem 0xd4440000-0xd4443fff 64bit] [ 2.292857] pci 0000:01:00.1: supports D1 D2 [ 2.300268] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.300273] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.300278] pci 0000:00:01.0: bridge window [mem 0xd4400000-0xd44fffff] [ 2.300292] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.300350] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.300356] pci 0000:00:1c.0: bridge window [mem 0xd4300000-0xd43fffff] [ 2.300466] pci 0000:00:1c.1: PCI bridge to [bus 03-23] [ 2.300470] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 2.300474] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 2.300597] pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010 [ 2.300636] pci 0000:24:00.0: reg 0x10: [mem 0xd4200000-0xd42007ff] [ 2.300659] pci 0000:24:00.0: reg 0x14: [mem 0xd4205000-0xd42050ff] [ 2.300963] pci 0000:24:00.1: [197b:2392] type 00 class 0x088000 [ 2.300995] pci 0000:24:00.1: reg 0x10: [mem 0xd4204000-0xd42040ff] [ 2.301109] pci 0000:24:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 2.301289] pci 0000:24:00.2: [197b:2391] type 00 class 0x080501 [ 2.301322] pci 0000:24:00.2: reg 0x10: [mem 0xd4203000-0xd42030ff] [ 2.308319] pci 0000:00:1c.2: PCI bridge to [bus 24] [ 2.308326] pci 0000:00:1c.2: bridge window [mem 0xd4200000-0xd42fffff] [ 2.308577] pci 0000:25:00.0: [8086:0082] type 00 class 0x028000 [ 2.308761] pci 0000:25:00.0: reg 0x10: [mem 0xd4100000-0xd4101fff 64bit] [ 2.309530] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold [ 2.309681] pci 0000:25:00.0: System wakeup disabled by ACPI [ 2.316376] pci 0000:00:1c.3: PCI bridge to [bus 25] [ 2.316382] pci 0000:00:1c.3: bridge window [mem 0xd4100000-0xd41fffff] [ 2.316469] pci 0000:26:00.0: [197b:2360] type 00 class 0x010601 [ 2.316517] pci 0000:26:00.0: reg 0x10: [io 0x2018-0x201f] [ 2.316537] pci 0000:26:00.0: reg 0x14: [io 0x2024-0x2027] [ 2.316556] pci 0000:26:00.0: reg 0x18: [io 0x2010-0x2017] [ 2.316575] pci 0000:26:00.0: reg 0x1c: [io 0x2020-0x2023] [ 2.316595] pci 0000:26:00.0: reg 0x20: [io 0x2000-0x200f] [ 2.316614] pci 0000:26:00.0: reg 0x24: [mem 0xd4000000-0xd40001ff] [ 2.316633] pci 0000:26:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 2.316739] pci 0000:26:00.0: PME# supported from D3hot [ 2.324309] pci 0000:00:1c.4: PCI bridge to [bus 26] [ 2.324327] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 2.324331] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd40fffff] [ 2.324404] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.325243] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.325286] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.325326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.325365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.325404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.325443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.325482] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.325521] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.325791] ACPI: Enabled 4 GPEs in block 00 to 3F [ 2.325829] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 2.325921] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.325923] vgaarb: loaded [ 2.325924] vgaarb: bridge control possible 0000:01:00.0 [ 2.326117] SCSI subsystem initialized [ 2.326160] libata version 3.00 loaded. [ 2.326182] ACPI: bus type USB registered [ 2.326200] usbcore: registered new interface driver usbfs [ 2.326208] usbcore: registered new interface driver hub [ 2.326225] usbcore: registered new device driver usb [ 2.326357] PCI: Using ACPI for IRQ routing [ 2.332951] PCI: pci_cache_line_size set to 64 bytes [ 2.333025] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 2.333027] e820: reserve RAM buffer [mem 0xbdb9b000-0xbfffffff] [ 2.333028] e820: reserve RAM buffer [mem 0xbefb0000-0xbfffffff] [ 2.333029] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.333031] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff] [ 2.333136] NetLabel: Initializing [ 2.333138] NetLabel: domain hash size = 128 [ 2.333138] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.333150] NetLabel: unlabeled traffic allowed by default [ 2.333210] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.333215] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.335255] Switched to clocksource hpet [ 2.340470] AppArmor: AppArmor Filesystem Enabled [ 2.340504] pnp: PnP ACPI init [ 2.340517] ACPI: bus type PNP registered [ 2.340671] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.340674] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 2.340675] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.340677] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.340679] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.340680] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.340682] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.340684] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.340685] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.340688] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.340802] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 2.340869] system 00:02: [io 0x0200-0x027f] has been reserved [ 2.340871] system 00:02: [io 0x1000-0x100f] has been reserved [ 2.340873] system 00:02: [io 0xffff] has been reserved [ 2.340874] system 00:02: [io 0xffff] has been reserved [ 2.340876] system 00:02: [io 0x0400-0x047f] could not be reserved [ 2.340878] system 00:02: [io 0x0500-0x057f] has been reserved [ 2.340879] system 00:02: [io 0xef80-0xef9f] has been reserved [ 2.340881] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.340910] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.341246] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 2.341507] pnp 00:05: [dma 0 disabled] [ 2.341573] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 2.341600] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 2.341627] pnp 00:07: Plug and Play ACPI device, IDs SYN018d SYN0100 SYN0002 PNP0f13 (active) [ 2.341957] pnp: PnP ACPI: found 8 devices [ 2.341959] ACPI: bus type PNP unregistered [ 2.348350] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 2.348353] pci 0000:24:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 2.348355] pci 0000:26:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 2.348379] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000 [ 2.348405] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 2.348411] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.348414] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4460000-0xd447ffff pref] [ 2.348416] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.348418] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.348421] pci 0000:00:01.0: bridge window [mem 0xd4400000-0xd44fffff] [ 2.348423] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.348426] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.348432] pci 0000:00:1c.0: bridge window [mem 0xd4300000-0xd43fffff] [ 2.348440] pci 0000:00:1c.1: PCI bridge to [bus 03-23] [ 2.348442] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 2.348448] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 2.348452] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.348459] pci 0000:24:00.1: BAR 6: assigned [mem 0xd4208000-0xd420ffff pref] [ 2.348461] pci 0000:00:1c.2: PCI bridge to [bus 24] [ 2.348466] pci 0000:00:1c.2: bridge window [mem 0xd4200000-0xd42fffff] [ 2.348474] pci 0000:00:1c.3: PCI bridge to [bus 25] [ 2.348479] pci 0000:00:1c.3: bridge window [mem 0xd4100000-0xd41fffff] [ 2.348488] pci 0000:26:00.0: BAR 6: assigned [mem 0xd4010000-0xd401ffff pref] [ 2.348490] pci 0000:00:1c.4: PCI bridge to [bus 26] [ 2.348493] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 2.348498] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd40fffff] [ 2.348506] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.348508] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.348510] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.348511] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff] [ 2.348512] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 2.348514] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 2.348516] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 2.348517] pci_bus 0000:01: resource 1 [mem 0xd4400000-0xd44fffff] [ 2.348518] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.348520] pci_bus 0000:02: resource 1 [mem 0xd4300000-0xd43fffff] [ 2.348522] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] [ 2.348523] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd3ffffff] [ 2.348525] pci_bus 0000:03: resource 2 [mem 0xd4600000-0xd47fffff 64bit pref] [ 2.348526] pci_bus 0000:24: resource 1 [mem 0xd4200000-0xd42fffff] [ 2.348528] pci_bus 0000:25: resource 1 [mem 0xd4100000-0xd41fffff] [ 2.348530] pci_bus 0000:26: resource 0 [io 0x2000-0x2fff] [ 2.348531] pci_bus 0000:26: resource 1 [mem 0xd4000000-0xd40fffff] [ 2.348558] NET: Registered protocol family 2 [ 2.348760] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.348987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.349119] TCP: Hash tables configured (established 131072 bind 65536) [ 2.349133] TCP: reno registered [ 2.349150] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 2.349202] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 2.349279] NET: Registered protocol family 1 [ 2.349299] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 2.349395] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.349397] pci 0000:00:14.0: PCI INT A: no GSI [ 2.349516] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.349914] pci 0000:01:00.0: Boot video device [ 2.349935] PCI: CLS 64 bytes, default 64 [ 2.349987] Trying to unpack rootfs image as initramfs... [ 6.679690] Freeing initrd memory: 21408K (ffff88007eb18000 - ffff880080000000) [ 6.679699] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.679702] software IO TLB [mem 0xb9b9b000-0xbdb9b000] (64MB) mapped at [ffff8800b9b9b000-ffff8800bdb9afff] [ 6.680019] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff] [ 6.680021] ------------[ cut here ]------------ [ 6.680026] WARNING: CPU: 6 PID: 1 at /build/buildd/linux-3.16.0/arch/x86/mm/ioremap.c:183 __ioremap_caller+0x25a/0x2e0() [ 6.680027] Info: mapping multiple BARs. Your kernel is fine. [ 6.680028] Modules linked in: [ 6.680032] CPU: 6 PID: 1 Comm: swapper/0 Not tainted 3.16.0-17-generic #23-Ubuntu [ 6.680033] Hardware name: Hewlett-Packard HP EliteBook 8770w/176C, BIOS 68IAV Ver. F.43 10/08/2013 [ 6.680035] 0000000000000009 ffff88032c5e7b78 ffffffff8177f543 ffff88032c5e7bc0 [ 6.680037] ffff88032c5e7bb0 ffffffff8106fcfd ffffc900018f0000 0000000000006000 [ 6.680039] ffffc900018f0000 ffffc900018f0000 00000000fed10000 ffff88032c5e7c10 [ 6.680041] Call Trace: [ 6.680047] [] dump_stack+0x45/0x56 [ 6.680051] [] warn_slowpath_common+0x7d/0xa0 [ 6.680053] [] warn_slowpath_fmt+0x4c/0x50 [ 6.680056] [] ? iomem_map_sanity_check+0xc7/0xd0 [ 6.680058] [] __ioremap_caller+0x25a/0x2e0 [ 6.680061] [] ioremap_nocache+0x17/0x20 [ 6.680064] [] snb_uncore_imc_init_box+0x6d/0x90 [ 6.680067] [] uncore_pci_probe+0xce/0x1b0 [ 6.680071] [] local_pci_probe+0x45/0xa0 [ 6.680073] [] ? pci_match_device+0xe5/0x110 [ 6.680076] [] pci_device_probe+0xd9/0x130 [ 6.680080] [] driver_probe_device+0xa3/0x410 [ 6.680082] [] __driver_attach+0x8b/0x90 [ 6.680085] [] ? __device_attach+0x40/0x40 [ 6.680088] [] bus_for_each_dev+0x6b/0xb0 [ 6.680090] [] driver_attach+0x1e/0x20 [ 6.680092] [] bus_add_driver+0x180/0x250 [ 6.680095] [] ? uncore_types_init+0x1a1/0x1a1 [ 6.680097] [] driver_register+0x64/0xf0 [ 6.680100] [] __pci_register_driver+0x4c/0x50 [ 6.680102] [] intel_uncore_init+0x174/0x40b [ 6.680104] [] ? uncore_types_init+0x1a1/0x1a1 [ 6.680107] [] do_one_initcall+0xd8/0x210 [ 6.680111] [] ? parse_args+0x2a0/0x4e0 [ 6.680114] [] kernel_init_freeable+0x190/0x218 [ 6.680118] [] ? rest_init+0x80/0x80 [ 6.680120] [] kernel_init+0xe/0xf0 [ 6.680123] [] ret_from_fork+0x7c/0xb0 [ 6.680125] [] ? rest_init+0x80/0x80 [ 6.680130] ---[ end trace 819635382ef39ee1 ]--- [ 6.680185] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 6.680240] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680248] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680255] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680263] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680271] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680279] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680283] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680289] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x16 [ 6.680351] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 6.680380] Scanning for low memory corruption every 60 seconds [ 6.680710] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 6.680733] Initialise system trusted keyring [ 6.680753] audit: initializing netlink subsys (disabled) [ 6.680770] audit: type=2000 audit(1412586332.612:1): initialized [ 6.681152] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.682468] zpool: loaded [ 6.682471] zbud: loaded [ 6.682631] VFS: Disk quotas dquot_6.5.2 [ 6.682663] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.683084] fuse init (API version 7.23) [ 6.683163] msgmni has been set to 23896 [ 6.683218] Key type big_key registered [ 6.683626] Key type asymmetric registered [ 6.683630] Asymmetric key parser 'x509' registered [ 6.683663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.683727] io scheduler noop registered [ 6.683731] io scheduler deadline registered (default) [ 6.683775] io scheduler cfq registered [ 6.684000] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 6.684167] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 6.684343] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 6.684521] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 6.684685] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 6.684853] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X [ 6.684938] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 6.684940] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 6.684941] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 6.684944] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.684962] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 6.684966] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 6.684983] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 6.684987] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 6.685004] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 6.685005] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt [ 6.685007] pci 0000:24:00.1: Signaling PME through PCIe PME interrupt [ 6.685008] pci 0000:24:00.2: Signaling PME through PCIe PME interrupt [ 6.685012] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 6.685028] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 6.685030] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt [ 6.685034] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 6.685050] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 6.685052] pci 0000:26:00.0: Signaling PME through PCIe PME interrupt [ 6.685056] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 6.685071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.685111] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ [ 6.685150] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 6.685156] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.685213] intel_idle: MWAIT substates: 0x21120 [ 6.685214] intel_idle: v0.4 model 0x3A [ 6.685215] intel_idle: lapic_timer_reliable_states 0xffffffff [ 6.685669] ACPI: AC Adapter [AC] (on-line) [ 6.685839] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 6.685843] ACPI: Sleep Button [SLPB] [ 6.685878] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 6.685897] ACPI: Lid Switch [LID] [ 6.685932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.685934] ACPI: Power Button [PWRF] [ 6.710267] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.710270] ACPI: Thermal Zone [CPUZ] (51 C) [ 6.736329] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.736333] ACPI: Thermal Zone [GFXZ] (52 C) [ 6.751333] thermal LNXTHERM:02: registered as thermal_zone2 [ 6.751337] ACPI: Thermal Zone [EXTZ] (41 C) [ 6.766370] thermal LNXTHERM:03: registered as thermal_zone3 [ 6.766374] ACPI: Thermal Zone [LOCZ] (39 C) [ 6.781466] thermal LNXTHERM:04: registered as thermal_zone4 [ 6.781470] ACPI: Thermal Zone [BATZ] (28 C) [ 6.781809] thermal LNXTHERM:05: registered as thermal_zone5 [ 6.781811] ACPI: Thermal Zone [PCHZ] (127 C) [ 6.781867] GHES: HEST is not enabled! [ 6.782095] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.802852] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 6.804737] Linux agpgart interface v0.103 [ 6.805527] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 6.834731] ACPI: Battery Slot [BAT0] (battery present) [ 6.834806] ACPI: Battery Slot [BAT1] (battery absent) [ 7.019355] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 7.021134] brd: module loaded [ 7.021723] loop: module loaded [ 7.021950] libphy: Fixed MDIO Bus: probed [ 7.021954] tun: Universal TUN/TAP device driver, 1.6 [ 7.021955] tun: (C) 1999-2004 Max Krasnyansky [ 7.021997] PPP generic driver version 2.4.2 [ 7.022045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.022050] ehci-pci: EHCI PCI platform driver [ 7.022220] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 7.022226] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 7.022240] ehci-pci 0000:00:1a.0: debug port 2 [ 7.026136] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 7.026157] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd453a000 [ 7.035267] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 7.035301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.035303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.035304] usb usb1: Product: EHCI Host Controller [ 7.035306] usb usb1: Manufacturer: Linux 3.16.0-17-generic ehci_hcd [ 7.035307] usb usb1: SerialNumber: 0000:00:1a.0 [ 7.035413] hub 1-0:1.0: USB hub found [ 7.035420] hub 1-0:1.0: 3 ports detected [ 7.035664] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 7.035669] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.035680] ehci-pci 0000:00:1d.0: debug port 2 [ 7.039571] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 7.039579] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4539000 [ 7.051280] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 7.051307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.051308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.051310] usb usb2: Product: EHCI Host Controller [ 7.051311] usb usb2: Manufacturer: Linux 3.16.0-17-generic ehci_hcd [ 7.051312] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.051443] hub 2-0:1.0: USB hub found [ 7.051448] hub 2-0:1.0: 3 ports detected [ 7.051574] ehci-platform: EHCI generic platform driver [ 7.051583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.051588] ohci-pci: OHCI PCI platform driver [ 7.051598] ohci-platform: OHCI generic platform driver [ 7.051607] uhci_hcd: USB Universal Host Controller Interface driver [ 7.051718] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 7.051720] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 7.051735] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.051739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 7.051831] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 7.051854] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X [ 7.051909] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.051911] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.051912] usb usb3: Product: xHCI Host Controller [ 7.051914] usb usb3: Manufacturer: Linux 3.16.0-17-generic xhci_hcd [ 7.051915] usb usb3: SerialNumber: 0000:00:14.0 [ 7.052039] hub 3-0:1.0: USB hub found [ 7.052049] hub 3-0:1.0: 4 ports detected [ 7.052335] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.052338] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 7.052377] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.052378] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.052380] usb usb4: Product: xHCI Host Controller [ 7.052381] usb usb4: Manufacturer: Linux 3.16.0-17-generic xhci_hcd [ 7.052383] usb usb4: SerialNumber: 0000:00:14.0 [ 7.052502] hub 4-0:1.0: USB hub found [ 7.052511] hub 4-0:1.0: 4 ports detected [ 7.052843] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.054669] i8042: Detected active multiplexing controller, rev 1.1 [ 7.055343] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.055349] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.055372] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.055391] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.055408] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.055565] mousedev: PS/2 mouse device common for all mice [ 7.055892] rtc_cmos 00:03: RTC can wake from S4 [ 7.056062] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 7.056090] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 7.056158] device-mapper: uevent: version 1.0.3 [ 7.056220] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 7.056240] Intel P-state driver initializing. [ 7.056250] Intel pstate controlling: cpu 0 [ 7.056288] Intel pstate controlling: cpu 1 [ 7.056323] Intel pstate controlling: cpu 2 [ 7.056357] Intel pstate controlling: cpu 3 [ 7.056471] Intel pstate controlling: cpu 4 [ 7.056511] Intel pstate controlling: cpu 5 [ 7.056538] Intel pstate controlling: cpu 6 [ 7.056656] Intel pstate controlling: cpu 7 [ 7.056700] Consider also installing thermald for improved thermal control. [ 7.056714] ledtrig-cpu: registered to indicate activity on CPUs [ 7.056898] TCP: cubic registered [ 7.057100] NET: Registered protocol family 10 [ 7.057473] NET: Registered protocol family 17 [ 7.057495] Key type dns_resolver registered [ 7.058255] Loading compiled-in X.509 certificates [ 7.060037] Loaded X.509 cert 'Magrathea: Glacier signing key: 63ee7919bb16769709764a1e7c154008a93ea3d0' [ 7.060066] registered taskstats version 1 [ 7.062064] Key type trusted registered [ 7.063670] Key type encrypted registered [ 7.065125] AppArmor: AppArmor sha1 policy hashing enabled [ 7.081070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 7.111450] tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value [ 7.111485] ima: No TPM chip found, activating TPM-bypass! [ 7.111514] evm: HMAC attrs: 0x1 [ 7.112091] Magic number: 2:939:69 [ 7.112152] memory memory97: hash matches [ 7.112237] rtc_cmos 00:03: setting system clock to 2014-10-06 09:05:33 UTC (1412586333) [ 7.112460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 7.112462] EDD information not available. [ 7.112524] PM: Hibernation image not present or could not be loaded. [ 7.113235] Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000) [ 7.113236] Write protecting the kernel read-only data: 12288k [ 7.114176] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000) [ 7.114992] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000) [ 7.123870] systemd-udevd[150]: starting version 208 [ 7.124198] random: systemd-udevd urandom read with 25 bits of entropy available [ 7.134199] wmi: Mapper loaded [ 7.135856] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 7.138936] pps_core: LinuxPPS API ver. 1 registered [ 7.138937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 7.139967] PTP clock support registered [ 7.140785] sdhci: Secure Digital Host Controller Interface driver [ 7.140786] sdhci: Copyright(c) Pierre Ossman [ 7.141419] [drm] Initialized drm 1.1.0 20060810 [ 7.142637] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30) [ 7.142900] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 7.142902] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 7.166148] [drm] radeon kernel modesetting enabled. [ 7.172720] mmc0: no vqmmc regulator found [ 7.172722] mmc0: no vmmc regulator found [ 7.172848] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 7.172872] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 7.172875] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA [ 7.172896] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30) [ 7.172953] [drm] initializing kernel modesetting (VERDE 0x1002:0x682D 0x103C:0x176C). [ 7.172960] [drm] register mmio base: 0xD4400000 [ 7.172960] [drm] register mmio size: 262144 [ 7.173009] ATOM BIOS: HP/IEC [ 7.173136] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 7.173138] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 7.173139] [drm] Detected VRAM RAM=1024M, BAR=256M [ 7.173139] [drm] RAM width 128bits DDR [ 7.173189] [TTM] Zone kernel: Available graphics memory: 6118552 kiB [ 7.173191] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 7.173192] [TTM] Initializing pool allocator [ 7.173195] [TTM] Initializing DMA pool allocator [ 7.173218] [drm] radeon: 1024M of VRAM memory ready [ 7.173219] [drm] radeon: 1024M of GTT memory ready. [ 7.173226] [drm] Loading VERDE Microcode [ 7.173391] [drm] radeon/VERDE_mc2.bin: 31500 bytes [ 7.173410] [drm] Internal thermal controller without fan control [ 7.173444] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e [ 7.179098] [drm] radeon: dpm initialized [ 7.179158] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 7.179641] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e [ 7.179644] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0 [ 7.267586] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 7.283866] usb 4-1: New USB device found, idVendor=0424, idProduct=5434 [ 7.283868] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 7.283870] usb 4-1: Product: USB5534 [ 7.283871] usb 4-1: Manufacturer: SMSC [ 7.283873] usb 4-1: SerialNumber: 1239567 [ 7.284178] hub 4-1:1.0: USB hub found [ 7.284202] hub 4-1:1.0: 4 ports detected [ 7.382070] e1000e 0000:00:19.0 eth0: registered PHC clock [ 7.382073] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 84:34:97:23:75:10 [ 7.382074] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 7.382108] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 7.382127] ahci 0000:00:1f.2: version 3.0 [ 7.395624] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 7.527998] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 7.528000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.528307] hub 1-1:1.0: USB hub found [ 7.528380] hub 1-1:1.0: 6 ports detected [ 7.591180] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 7.679819] tsc: Refined TSC clocksource calibration: 2394.560 MHz [ 8.327672] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 8.429771] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 8.429875] radeon 0000:01:00.0: WB enabled [ 8.429877] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b961ac00 [ 8.429879] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800b961ac04 [ 8.429880] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800b961ac08 [ 8.429881] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b961ac0c [ 8.429882] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800b961ac10 [ 8.430368] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90012035a18 [ 8.430369] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.430369] [drm] Driver supports precise vblank timestamp query. [ 8.430382] radeon 0000:01:00.0: irq 48 for MSI/MSI-X [ 8.430389] radeon 0000:01:00.0: radeon: using MSI. [ 8.430407] [drm] radeon: irq initialized. [ 8.729197] Switched to clocksource tsc [ 8.729390] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface. [ 8.729518] ahci 0000:00:1f.2: irq 49 for MSI/MSI-X [ 8.729541] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 8.729922] acpi device:01: registered as cooling_device8 [ 8.729994] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12 [ 8.744746] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1d impl SATA mode [ 8.744749] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 8.769256] scsi0 : ahci [ 8.769443] scsi1 : ahci [ 8.769615] scsi2 : ahci [ 8.769714] scsi3 : ahci [ 8.769797] scsi4 : ahci [ 8.769894] scsi5 : ahci [ 8.769924] ata1: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538100 irq 49 [ 8.769925] ata2: DUMMY [ 8.769927] ata3: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538200 irq 49 [ 8.769930] ata4: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538280 irq 49 [ 8.769932] ata5: SATA max UDMA/133 abar m2048@0xd4538000 port 0xd4538300 irq 49 [ 8.769933] ata6: DUMMY [ 8.770047] ahci 0000:26:00.0: irq 50 for MSI/MSI-X [ 8.770111] ahci 0000:26:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 8.770113] ahci 0000:26:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 8.770235] scsi6 : ahci [ 8.770269] ata7: SATA max UDMA/133 abar m512@0xd4000000 port 0xd4000100 irq 50 [ 8.792822] firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 8.840815] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 8.881646] [drm] ring test on 0 succeeded in 1 usecs [ 8.881650] [drm] ring test on 1 succeeded in 1 usecs [ 8.881653] [drm] ring test on 2 succeeded in 1 usecs [ 8.881717] [drm] ring test on 3 succeeded in 4 usecs [ 8.881723] [drm] ring test on 4 succeeded in 1 usecs [ 8.913358] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00, board id: 2009, fw id: 1119621 [ 8.956764] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 8.973216] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 8.973219] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.973501] hub 2-1:1.0: USB hub found [ 8.973589] hub 2-1:1.0: 8 ports detected [ 9.067462] [drm] ring test on 5 succeeded in 2 usecs [ 9.067467] [drm] UVD initialized successfully. [ 9.067623] [drm] ib test on ring 0 succeeded in 0 usecs [ 9.067658] [drm] ib test on ring 1 succeeded in 0 usecs [ 9.067692] [drm] ib test on ring 2 succeeded in 0 usecs [ 9.067753] [drm] ib test on ring 3 succeeded in 0 usecs [ 9.067797] [drm] ib test on ring 4 succeeded in 1 usecs [ 9.089049] ata7: SATA link down (SStatus 0 SControl 300) [ 9.089051] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.089620] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 9.089703] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 9.089705] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 9.089706] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 9.089870] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 9.089941] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 9.089944] ata1.00: configured for UDMA/133 [ 9.097147] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 9.097429] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 9.097432] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.097473] sd 0:0:0:0: [sda] Write Protect is off [ 9.097475] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.097485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.099498] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 9.099935] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.141083] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 9.218461] [drm] ib test on ring 5 succeeded [ 9.269407] usb 3-1: New USB device found, idVendor=0424, idProduct=5434 [ 9.269414] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.269723] hub 3-1:1.0: USB hub found [ 9.269748] hub 3-1:1.0: 4 ports detected [ 9.273172] [drm] radeon atom DIG backlight initialized [ 9.273176] [drm] Radeon Display Connectors [ 9.273177] [drm] Connector 0: [ 9.273177] [drm] LVDS-1 [ 9.273178] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 9.273179] [drm] Encoders: [ 9.273180] [drm] LCD1: INTERNAL_UNIPHY [ 9.273181] [drm] Connector 1: [ 9.273181] [drm] DP-1 [ 9.273182] [drm] HPD1 [ 9.273183] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 9.273184] [drm] Encoders: [ 9.273184] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.273185] [drm] Connector 2: [ 9.273185] [drm] DP-2 [ 9.273186] [drm] HPD2 [ 9.273187] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 9.273188] [drm] Encoders: [ 9.273188] [drm] DFP2: INTERNAL_UNIPHY1 [ 9.273189] [drm] Connector 3: [ 9.273189] [drm] DP-3 [ 9.273190] [drm] HPD3 [ 9.273191] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 9.273191] [drm] Encoders: [ 9.273192] [drm] DFP3: INTERNAL_UNIPHY2 [ 9.273193] [drm] Connector 4: [ 9.273194] [drm] VGA-1 [ 9.273195] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 9.273196] [drm] Encoders: [ 9.273196] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.293426] firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 9.417376] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.420311] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 9.420322] ata3.00: ATAPI: hp DVDRAM GT50N, MP01, max UDMA/100 [ 9.423445] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 9.423459] ata3.00: configured for UDMA/100 [ 9.425188] scsi 2:0:0:0: CD-ROM hp DVDRAM GT50N MP01 PQ: 0 ANSI: 5 [ 9.436383] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.436390] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.436619] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 9.436777] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 9.437348] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 9.568035] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b [ 9.568043] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.568047] usb 3-2: Product: USB Receiver [ 9.568049] usb 3-2: Manufacturer: Logitech [ 9.571512] hidraw: raw HID events driver (C) Jiri Kosina [ 9.575938] usbcore: registered new interface driver usbhid [ 9.575940] usbhid: USB HID core driver [ 9.577797] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 9.634345] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:0 [ 9.636717] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input13 [ 9.636863] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-2:1 [ 9.637536] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 9.638513] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input14 [ 9.638739] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:2 [ 9.753662] ata4: SATA link down (SStatus 0 SControl 300) [ 9.779501] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b230 [ 9.779508] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 9.779512] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 9.779515] usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd. [ 9.779518] usb 1-1.3: SerialNumber: SN0001 [ 9.853889] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 9.949676] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1 [ 9.949683] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.949687] usb 2-1.6: Product: BCM20702A0 [ 9.949690] usb 2-1.6: Manufacturer: Broadcom Corp [ 9.949693] usb 2-1.6: SerialNumber: 083E8E9A105C [ 10.073902] ata5: SATA link down (SStatus 0 SControl 300) [ 10.316412] [drm] fb mappable at 0xC0479000 [ 10.316415] [drm] vram apper at 0xC0000000 [ 10.316416] [drm] size 9216000 [ 10.316416] [drm] fb depth is 24 [ 10.316417] [drm] pitch is 7680 [ 10.316490] fbcon: radeondrmfb (fb0) is primary device [ 10.456303] Console: switching to colour frame buffer device 240x67 [ 10.459526] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 10.459527] radeon 0000:01:00.0: registered panic notifier [ 10.462671] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0 [ 10.820184] random: nonblocking pool is initialized [ 10.956235] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 11.005771] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 11.050608] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 12.043558] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 12.047546] ISO 9660 Extensions: RRIP_1991A [ 12.418069] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 46.624893] init: plymouth-upstart-bridge main process (1020) killed by TERM signal [ 49.264417] Adding 17407996k swap on /dev/sda8. Priority:-1 extents:1 across:17407996k SSFS [ 50.661057] systemd-udevd[1210]: starting version 208 [ 59.801337] init: cups main process (1248) killed by HUP signal [ 59.801345] init: cups main process ended, respawning [ 60.886532] lp: driver loaded but no devices found [ 61.658303] Initializing HPQ6001 module [ 61.658381] input: HP Wireless hotkeys as /devices/virtual/input/input15 [ 62.040011] ppdev: user-space parallel port driver [ 62.115298] parport_pc 00:05: reported by Plug and Play ACPI [ 62.115381] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 62.210339] lp0: using parport0 (interrupt-driven). [ 64.489996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.451629] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) [ 66.451637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 66.451640] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 66.451643] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 66.451645] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 66.451648] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 66.451649] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 66.451652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 66.451654] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 66.451880] hp_accel: laptop model unknown, using default axes configuration [ 66.452063] mei_me 0000:00:16.0: irq 51 for MSI/MSI-X [ 66.577654] lis3lv02d: 8 bits 3DC sensor found [ 66.840335] Bluetooth: Core ver 2.19 [ 66.840350] NET: Registered protocol family 31 [ 66.840351] Bluetooth: HCI device and connection manager initialized [ 66.840357] Bluetooth: HCI socket layer initialized [ 66.840358] Bluetooth: L2CAP socket layer initialized [ 66.840364] Bluetooth: SCO socket layer initialized [ 67.807588] Bluetooth: RFCOMM TTY layer initialized [ 67.807598] Bluetooth: RFCOMM socket layer initialized [ 67.807602] Bluetooth: RFCOMM ver 1.11 [ 67.891061] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16 [ 69.599621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 69.599624] Bluetooth: BNEP filters: protocol multicast [ 69.599631] Bluetooth: BNEP socket layer initialized [ 70.231978] AVX version of gcm_enc/dec engaged. [ 70.588335] device-mapper: multipath: version 1.7.0 loaded [ 70.847192] cfg80211: Calling CRDA to update world regulatory domain [ 71.782663] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 72.923761] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 72.923764] Copyright(c) 2003- 2014 Intel Corporation [ 72.923867] iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control [ 72.923933] iwlwifi 0000:25:00.0: irq 52 for MSI/MSI-X [ 75.015347] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 75.015432] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 75.015434] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 75.015513] snd_hda_intel 0000:01:00.1: irq 54 for MSI/MSI-X [ 75.303673] usbcore: registered new interface driver btusb [ 75.391401] media: Linux media interface: v0.10 [ 75.962942] cfg80211: World regulatory domain updated: [ 75.962945] cfg80211: DFS Master region: unset [ 75.962947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 75.962948] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 75.962950] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 75.962951] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 75.962952] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 75.962953] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.183890] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 76.183978] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 76.184045] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 76.184113] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 76.184171] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 76.184216] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 76.405915] sound hdaudioC0D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 76.405918] sound hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 76.405920] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 76.405921] sound hdaudioC0D0: mono: mono_out=0x0 [ 76.405922] sound hdaudioC0D0: inputs: [ 76.405923] sound hdaudioC0D0: Mic=0xc [ 76.405924] sound hdaudioC0D0: Internal Mic=0x11 [ 76.405926] sound hdaudioC0D0: Line=0xf [ 76.418692] init: failsafe main process (1532) killed by TERM signal [ 76.455245] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 [ 76.455307] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [ 76.455351] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [ 76.455395] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 [ 77.112820] Linux video capture interface: v2.00 [ 80.675330] intel_rapl: RAPL domain uncore detection failed [ 80.675336] intel_rapl: RAPL domain dram detection failed [ 80.887812] iwlwifi 0000:25:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 82.187109] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 82.421608] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input28 [ 82.421697] usbcore: registered new interface driver uvcvideo [ 82.421699] USB Video Class driver (1.1.1) [ 91.709350] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 91.709353] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 91.709354] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 91.709356] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 91.709406] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 94.165649] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 103.630758] init: alsa-restore main process (2018) terminated with status 99 [ 106.887921] systemd-logind[2518]: New seat seat0. [ 106.888293] systemd-logind[2518]: Watching system buttons on /dev/input/event2 (Power Button) [ 106.888338] systemd-logind[2518]: Watching system buttons on /dev/input/event5 (Video Bus) [ 106.888377] systemd-logind[2518]: Watching system buttons on /dev/input/event1 (Lid Switch) [ 106.888416] systemd-logind[2518]: Watching system buttons on /dev/input/event0 (Sleep Button) [ 106.891947] systemd-logind[2518]: Failed to start unit user@999.service: Unknown unit: user@999.service [ 106.891952] systemd-logind[2518]: Failed to start user service: Unknown unit: user@999.service [ 106.894775] systemd-logind[2518]: New session c1 of user ubuntu. [ 106.897782] systemd-logind[2518]: New session c2 of user ubuntu. [ 106.900648] systemd-logind[2518]: New session c3 of user ubuntu. [ 106.903386] systemd-logind[2518]: New session c4 of user ubuntu. [ 106.906113] systemd-logind[2518]: New session c5 of user ubuntu. [ 106.908805] systemd-logind[2518]: New session c6 of user ubuntu. [ 108.182550] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 108.285522] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 108.285722] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 108.287421] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 108.294474] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0 [ 108.561890] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S [ 108.568531] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0 [ 108.652690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 111.149086] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 111.149123] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 157.647272] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 157.649276] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 157.651276] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 157.689298] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 157.691309] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 157.693308] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:255 [ 228.985082] systemd-logind[2518]: Watching system buttons on /dev/input/event2 (Power Button) [ 229.005066] systemd-logind[2518]: Watching system buttons on /dev/input/event0 (Sleep Button) [ 229.021156] systemd-logind[2518]: Watching system buttons on /dev/input/event1 (Lid Switch) [ 229.041144] systemd-logind[2518]: Watching system buttons on /dev/input/event5 (Video Bus) [ 233.111757] systemd-logind[2518]: New session c8 of user ubuntu. [ 233.111791] systemd-logind[2518]: Linked /tmp/.X11-unix/X0 to /run/user/999/X11-display. [ 346.790756] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd [ 346.807293] usb 4-4: New USB device found, idVendor=152d, idProduct=0569 [ 346.807301] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 346.807304] usb 4-4: Product: USB to ATA/ATAPI Bridge [ 346.807307] usb 4-4: Manufacturer: JMicron [ 346.807310] usb 4-4: SerialNumber: 4A3337343030383448584B595845 [ 348.477947] usb-storage 4-4:1.0: USB Mass Storage device detected [ 348.478225] scsi7 : usb-storage 4-4:1.0 [ 348.478395] usbcore: registered new interface driver usb-storage [ 348.588835] usbcore: registered new interface driver uas [ 349.475655] scsi 7:0:0:0: Direct-Access Hitachi HTS727575A9E364 PQ: 0 ANSI: 5 [ 349.476095] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 349.476243] sd 7:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 349.476734] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 349.477219] sd 7:0:0:0: [sdb] Asking for cache data failed [ 349.477224] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 349.760792] sdb: sdb1 [ 349.762218] sd 7:0:0:0: [sdb] Attached SCSI disk [ 350.097878] EXT4-fs (sdb1): recovery complete [ 350.098248] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 350.293120] systemd-hostnamed[6253]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 396.016083] usb 4-4: USB disconnect, device number 3 [ 409.808551] usb 3-1.1: new high-speed USB device number 4 using xhci_hcd [ 409.897277] usb 3-1.1: New USB device found, idVendor=152d, idProduct=0569 [ 409.897284] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 409.897287] usb 3-1.1: Product: USB to ATA/ATAPI Bridge [ 409.897290] usb 3-1.1: Manufacturer: JMicron [ 409.897293] usb 3-1.1: SerialNumber: 4A3337343030383448584B595845 [ 409.897953] usb-storage 3-1.1:1.0: USB Mass Storage device detected [ 409.898260] scsi8 : usb-storage 3-1.1:1.0 [ 410.897754] scsi 8:0:0:0: Direct-Access Hitachi HTS727575A9E364 PQ: 0 ANSI: 5 [ 410.898406] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 410.898589] sd 8:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 410.899099] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 410.899549] sd 8:0:0:0: [sdb] Asking for cache data failed [ 410.899555] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 411.509408] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.509446] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 411.509453] usb 3-1.1: hub failed to enable device, error -22 [ 411.581221] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.581268] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 411.581274] usb 3-1.1: hub failed to enable device, error -22 [ 411.653254] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.669800] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 411.669808] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 411.749480] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.749527] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 411.749534] usb 3-1.1: hub failed to enable device, error -22 [ 411.821215] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.821256] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 411.821262] usb 3-1.1: hub failed to enable device, error -22 [ 411.893315] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.909926] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 411.909934] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 411.989548] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 411.989592] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 411.989599] usb 3-1.1: hub failed to enable device, error -22 [ 412.061368] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.061414] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.061421] usb 3-1.1: hub failed to enable device, error -22 [ 412.133405] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.150008] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 412.150016] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 412.229684] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.229728] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.229736] usb 3-1.1: hub failed to enable device, error -22 [ 412.301476] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.301525] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.301531] usb 3-1.1: hub failed to enable device, error -22 [ 412.373486] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.390060] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 412.390068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 412.469668] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.469711] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.469719] usb 3-1.1: hub failed to enable device, error -22 [ 412.541566] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.541615] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.541621] usb 3-1.1: hub failed to enable device, error -22 [ 412.613585] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.630110] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 412.630118] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 412.709809] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.709856] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.709863] usb 3-1.1: hub failed to enable device, error -22 [ 412.781646] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.781693] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.781699] usb 3-1.1: hub failed to enable device, error -22 [ 412.853690] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.870229] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 412.870238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 412.870453] sd 8:0:0:0: [sdb] Unhandled error code [ 412.870460] sd 8:0:0:0: [sdb] [ 412.870463] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 412.870466] sd 8:0:0:0: [sdb] CDB: [ 412.870469] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 412.870483] end_request: I/O error, dev sdb, sector 0 [ 412.870490] Buffer I/O error on device sdb, logical block 0 [ 412.957905] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 412.957954] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 412.957961] usb 3-1.1: hub failed to enable device, error -22 [ 413.029729] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.029778] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.029784] usb 3-1.1: hub failed to enable device, error -22 [ 413.101779] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.118291] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 413.118300] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 413.197973] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.198014] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.198022] usb 3-1.1: hub failed to enable device, error -22 [ 413.269701] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.269731] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.269736] usb 3-1.1: hub failed to enable device, error -22 [ 413.341753] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.358231] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 413.358237] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 413.454108] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.454144] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.454149] usb 3-1.1: hub failed to enable device, error -22 [ 413.525832] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.525889] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.525896] usb 3-1.1: hub failed to enable device, error -22 [ 413.597893] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.614453] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 413.614461] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 413.694263] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.694354] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.694363] usb 3-1.1: hub failed to enable device, error -22 [ 413.766099] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.766195] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.766204] usb 3-1.1: hub failed to enable device, error -22 [ 413.838125] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.854830] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 413.854839] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 413.934091] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 413.934124] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 413.934129] usb 3-1.1: hub failed to enable device, error -22 [ 414.006075] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.006126] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.006132] usb 3-1.1: hub failed to enable device, error -22 [ 414.078115] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.094685] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 414.094693] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 414.174309] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.174358] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.174365] usb 3-1.1: hub failed to enable device, error -22 [ 414.246161] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.246207] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.246214] usb 3-1.1: hub failed to enable device, error -22 [ 414.318184] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.334752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 414.334760] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 414.334977] sd 8:0:0:0: [sdb] Unhandled error code [ 414.334984] sd 8:0:0:0: [sdb] [ 414.334987] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 414.334990] sd 8:0:0:0: [sdb] CDB: [ 414.334994] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 414.335018] end_request: I/O error, dev sdb, sector 0 [ 414.335025] Buffer I/O error on device sdb, logical block 0 [ 414.422443] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.422483] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.422490] usb 3-1.1: hub failed to enable device, error -22 [ 414.494241] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.494291] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.494298] usb 3-1.1: hub failed to enable device, error -22 [ 414.566269] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.582693] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 414.582702] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 414.662529] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.662621] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.662630] usb 3-1.1: hub failed to enable device, error -22 [ 414.734434] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.734519] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.734528] usb 3-1.1: hub failed to enable device, error -22 [ 414.806340] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.822885] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 414.822893] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 414.902588] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.902620] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.902627] usb 3-1.1: hub failed to enable device, error -22 [ 414.974422] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 414.974459] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 414.974466] usb 3-1.1: hub failed to enable device, error -22 [ 415.046442] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.063004] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 415.063012] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 415.142683] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.142725] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.142732] usb 3-1.1: hub failed to enable device, error -22 [ 415.214378] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.214405] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.214412] usb 3-1.1: hub failed to enable device, error -22 [ 415.286411] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.302824] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 415.302841] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 415.382775] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.382817] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.382825] usb 3-1.1: hub failed to enable device, error -22 [ 415.454586] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.454637] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.454642] usb 3-1.1: hub failed to enable device, error -22 [ 415.526614] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.543146] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 415.543154] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 415.622842] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.622887] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.622894] usb 3-1.1: hub failed to enable device, error -22 [ 415.694674] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.694723] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.694729] usb 3-1.1: hub failed to enable device, error -22 [ 415.766694] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.783232] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 415.783241] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 415.783399] sd 8:0:0:0: [sdb] Unhandled error code [ 415.783403] sd 8:0:0:0: [sdb] [ 415.783406] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 415.783409] sd 8:0:0:0: [sdb] CDB: [ 415.783411] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 415.783424] end_request: I/O error, dev sdb, sector 0 [ 415.783431] Buffer I/O error on device sdb, logical block 0 [ 415.870944] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.870984] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.870992] usb 3-1.1: hub failed to enable device, error -22 [ 415.942753] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 415.942799] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 415.942805] usb 3-1.1: hub failed to enable device, error -22 [ 416.014779] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.031360] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 416.031369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 416.111030] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.111071] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.111078] usb 3-1.1: hub failed to enable device, error -22 [ 416.182813] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.182861] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.182868] usb 3-1.1: hub failed to enable device, error -22 [ 416.254863] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.271459] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 416.271468] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 416.351101] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.351143] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.351151] usb 3-1.1: hub failed to enable device, error -22 [ 416.422899] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.422946] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.422953] usb 3-1.1: hub failed to enable device, error -22 [ 416.494916] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.511443] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 416.511452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 416.591054] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.591082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.591090] usb 3-1.1: hub failed to enable device, error -22 [ 416.663011] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.663056] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.663063] usb 3-1.1: hub failed to enable device, error -22 [ 416.735041] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.751521] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 416.751528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 416.831271] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.831318] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.831325] usb 3-1.1: hub failed to enable device, error -22 [ 416.903081] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.903119] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 416.903126] usb 3-1.1: hub failed to enable device, error -22 [ 416.975053] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 416.991616] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 416.991625] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 417.071181] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.071209] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.071215] usb 3-1.1: hub failed to enable device, error -22 [ 417.143081] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.143107] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.143124] usb 3-1.1: hub failed to enable device, error -22 [ 417.215225] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.231734] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 417.231742] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 417.231967] sd 8:0:0:0: [sdb] Unhandled error code [ 417.231974] sd 8:0:0:0: [sdb] [ 417.231977] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 417.231980] sd 8:0:0:0: [sdb] CDB: [ 417.231983] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 417.231997] end_request: I/O error, dev sdb, sector 0 [ 417.232004] Buffer I/O error on device sdb, logical block 0 [ 417.319447] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.319490] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.319497] usb 3-1.1: hub failed to enable device, error -22 [ 417.391263] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.391309] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.391316] usb 3-1.1: hub failed to enable device, error -22 [ 417.463297] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.479850] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 417.479858] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 417.559516] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.559560] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.559567] usb 3-1.1: hub failed to enable device, error -22 [ 417.631263] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.631311] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.631318] usb 3-1.1: hub failed to enable device, error -22 [ 417.703399] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.719917] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 417.719924] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 417.799594] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.799640] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.799648] usb 3-1.1: hub failed to enable device, error -22 [ 417.871413] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.871461] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 417.871467] usb 3-1.1: hub failed to enable device, error -22 [ 417.943457] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 417.959952] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 417.959960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 418.039670] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.039709] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.039716] usb 3-1.1: hub failed to enable device, error -22 [ 418.111536] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.111582] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.111588] usb 3-1.1: hub failed to enable device, error -22 [ 418.183542] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.200129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 418.200137] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 418.279802] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.279850] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.279858] usb 3-1.1: hub failed to enable device, error -22 [ 418.351603] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.351652] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.351658] usb 3-1.1: hub failed to enable device, error -22 [ 418.423647] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.440131] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 418.440139] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 418.519843] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.519885] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.519892] usb 3-1.1: hub failed to enable device, error -22 [ 418.591687] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.591734] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.591741] usb 3-1.1: hub failed to enable device, error -22 [ 418.663705] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.680175] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 418.680184] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 418.680331] sd 8:0:0:0: [sdb] Unhandled error code [ 418.680336] sd 8:0:0:0: [sdb] [ 418.680338] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 418.680341] sd 8:0:0:0: [sdb] CDB: [ 418.680343] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 418.680357] end_request: I/O error, dev sdb, sector 0 [ 418.680363] Buffer I/O error on device sdb, logical block 0 [ 418.767976] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.768021] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.768028] usb 3-1.1: hub failed to enable device, error -22 [ 418.839761] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.839811] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 418.839818] usb 3-1.1: hub failed to enable device, error -22 [ 418.911807] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 418.928416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 418.928425] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 419.008037] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.008085] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.008092] usb 3-1.1: hub failed to enable device, error -22 [ 419.079897] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.079945] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.079951] usb 3-1.1: hub failed to enable device, error -22 [ 419.151890] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.168325] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 419.168333] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 419.248069] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.248113] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.248121] usb 3-1.1: hub failed to enable device, error -22 [ 419.319939] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.319986] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.319992] usb 3-1.1: hub failed to enable device, error -22 [ 419.391963] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.408478] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 419.408486] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 419.488171] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.488220] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.488227] usb 3-1.1: hub failed to enable device, error -22 [ 419.560029] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.560080] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.560087] usb 3-1.1: hub failed to enable device, error -22 [ 419.632030] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.648500] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 419.648508] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 419.728312] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.728357] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.728364] usb 3-1.1: hub failed to enable device, error -22 [ 419.800110] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.800158] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.800165] usb 3-1.1: hub failed to enable device, error -22 [ 419.872111] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.888600] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 419.888609] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 419.968381] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 419.968429] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 419.968436] usb 3-1.1: hub failed to enable device, error -22 [ 420.040120] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.040161] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.040167] usb 3-1.1: hub failed to enable device, error -22 [ 420.112233] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.128747] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 420.128755] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 420.128904] sd 8:0:0:0: [sdb] Unhandled error code [ 420.128908] sd 8:0:0:0: [sdb] [ 420.128911] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 420.128914] sd 8:0:0:0: [sdb] CDB: [ 420.128917] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 420.128930] end_request: I/O error, dev sdb, sector 0 [ 420.128937] Buffer I/O error on device sdb, logical block 0 [ 420.216452] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.216499] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.216506] usb 3-1.1: hub failed to enable device, error -22 [ 420.288250] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.288300] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.288306] usb 3-1.1: hub failed to enable device, error -22 [ 420.360306] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.376865] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 420.376873] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 420.456561] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.456603] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.456621] usb 3-1.1: hub failed to enable device, error -22 [ 420.528365] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.528411] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.528417] usb 3-1.1: hub failed to enable device, error -22 [ 420.600351] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.616959] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 420.616967] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 420.696630] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.696677] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.696684] usb 3-1.1: hub failed to enable device, error -22 [ 420.768450] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.768500] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.768507] usb 3-1.1: hub failed to enable device, error -22 [ 420.840479] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.857004] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 420.857012] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 420.936743] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 420.936786] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 420.936804] usb 3-1.1: hub failed to enable device, error -22 [ 421.008533] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.008582] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.008588] usb 3-1.1: hub failed to enable device, error -22 [ 421.080583] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.097156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 421.097164] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 421.176821] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.176865] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.176872] usb 3-1.1: hub failed to enable device, error -22 [ 421.248602] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.248651] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.248657] usb 3-1.1: hub failed to enable device, error -22 [ 421.320641] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.337253] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 421.337261] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 421.416885] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.416933] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.416940] usb 3-1.1: hub failed to enable device, error -22 [ 421.488709] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.488757] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.488763] usb 3-1.1: hub failed to enable device, error -22 [ 421.560727] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.577230] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 421.577238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 421.577393] sd 8:0:0:0: [sdb] Unhandled error code [ 421.577398] sd 8:0:0:0: [sdb] [ 421.577400] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 421.577404] sd 8:0:0:0: [sdb] CDB: [ 421.577406] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 421.577420] end_request: I/O error, dev sdb, sector 0 [ 421.577427] Buffer I/O error on device sdb, logical block 0 [ 421.664972] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.665017] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.665026] usb 3-1.1: hub failed to enable device, error -22 [ 421.736770] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.736813] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.736820] usb 3-1.1: hub failed to enable device, error -22 [ 421.808826] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.825330] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 421.825339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 421.904997] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.905052] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.905059] usb 3-1.1: hub failed to enable device, error -22 [ 421.976901] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 421.976953] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 421.976959] usb 3-1.1: hub failed to enable device, error -22 [ 422.048909] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.065467] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 422.065476] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 422.145150] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.145199] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.145206] usb 3-1.1: hub failed to enable device, error -22 [ 422.216956] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.217006] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.217012] usb 3-1.1: hub failed to enable device, error -22 [ 422.288980] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.305520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 422.305528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 422.385229] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.385271] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.385278] usb 3-1.1: hub failed to enable device, error -22 [ 422.457009] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.457047] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.457054] usb 3-1.1: hub failed to enable device, error -22 [ 422.529092] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.545639] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 422.545647] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 422.625331] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.625381] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.625388] usb 3-1.1: hub failed to enable device, error -22 [ 422.697137] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.697187] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.697193] usb 3-1.1: hub failed to enable device, error -22 [ 422.769154] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.785700] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 422.785708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 422.865364] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.865408] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.865416] usb 3-1.1: hub failed to enable device, error -22 [ 422.937235] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 422.937284] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 422.937291] usb 3-1.1: hub failed to enable device, error -22 [ 423.009230] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.025758] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 423.025766] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 423.025960] sd 8:0:0:0: [sdb] Unhandled error code [ 423.025967] sd 8:0:0:0: [sdb] [ 423.025970] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 423.025973] sd 8:0:0:0: [sdb] CDB: [ 423.025977] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 423.025991] end_request: I/O error, dev sdb, sector 0 [ 423.025998] Buffer I/O error on device sdb, logical block 0 [ 423.026052] ldm_validate_partition_table(): Disk read failed. [ 423.113452] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.113495] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.113512] usb 3-1.1: hub failed to enable device, error -22 [ 423.185300] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.185348] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.185354] usb 3-1.1: hub failed to enable device, error -22 [ 423.257321] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.273865] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 423.273873] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 423.353542] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.353567] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.353573] usb 3-1.1: hub failed to enable device, error -22 [ 423.425379] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.425425] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.425432] usb 3-1.1: hub failed to enable device, error -22 [ 423.497401] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.513893] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 423.513900] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 423.593668] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.593709] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.593717] usb 3-1.1: hub failed to enable device, error -22 [ 423.665448] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.665498] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.665504] usb 3-1.1: hub failed to enable device, error -22 [ 423.737475] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.754012] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 423.754020] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 423.833705] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.833751] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.833759] usb 3-1.1: hub failed to enable device, error -22 [ 423.905526] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.905571] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 423.905578] usb 3-1.1: hub failed to enable device, error -22 [ 423.977571] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 423.994117] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 423.994125] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 424.073846] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.073889] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.073897] usb 3-1.1: hub failed to enable device, error -22 [ 424.145655] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.145703] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.145710] usb 3-1.1: hub failed to enable device, error -22 [ 424.217652] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.234235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 424.234243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 424.313896] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.313942] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.313950] usb 3-1.1: hub failed to enable device, error -22 [ 424.385704] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.385754] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.385761] usb 3-1.1: hub failed to enable device, error -22 [ 424.457744] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.474304] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 424.474313] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 424.474565] sd 8:0:0:0: [sdb] Unhandled error code [ 424.474572] sd 8:0:0:0: [sdb] [ 424.474575] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 424.474578] sd 8:0:0:0: [sdb] CDB: [ 424.474581] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 424.474594] end_request: I/O error, dev sdb, sector 0 [ 424.474601] Buffer I/O error on device sdb, logical block 0 [ 424.561993] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.562033] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.562041] usb 3-1.1: hub failed to enable device, error -22 [ 424.633769] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.633817] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.633824] usb 3-1.1: hub failed to enable device, error -22 [ 424.705827] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.722316] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 424.722325] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 424.802059] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.802100] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.802108] usb 3-1.1: hub failed to enable device, error -22 [ 424.873876] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.873925] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 424.873932] usb 3-1.1: hub failed to enable device, error -22 [ 424.945919] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 424.962462] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 424.962471] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 425.042160] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.042207] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.042214] usb 3-1.1: hub failed to enable device, error -22 [ 425.113943] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.114002] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.114008] usb 3-1.1: hub failed to enable device, error -22 [ 425.185998] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.202567] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 425.202576] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 425.282226] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.282266] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.282274] usb 3-1.1: hub failed to enable device, error -22 [ 425.354034] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.354082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.354089] usb 3-1.1: hub failed to enable device, error -22 [ 425.426084] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.442664] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 425.442673] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 425.522311] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.522354] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.522362] usb 3-1.1: hub failed to enable device, error -22 [ 425.594135] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.594174] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.594182] usb 3-1.1: hub failed to enable device, error -22 [ 425.666142] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.682730] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 425.682738] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 425.762383] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.762429] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.762436] usb 3-1.1: hub failed to enable device, error -22 [ 425.834229] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.834275] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 425.834281] usb 3-1.1: hub failed to enable device, error -22 [ 425.906252] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 425.922781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 425.922789] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 425.922936] sd 8:0:0:0: [sdb] Unhandled error code [ 425.922940] sd 8:0:0:0: [sdb] [ 425.922943] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 425.922946] sd 8:0:0:0: [sdb] CDB: [ 425.922948] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 425.922962] end_request: I/O error, dev sdb, sector 0 [ 425.922968] Buffer I/O error on device sdb, logical block 0 [ 426.010454] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.010505] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.010512] usb 3-1.1: hub failed to enable device, error -22 [ 426.082254] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.082290] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.082297] usb 3-1.1: hub failed to enable device, error -22 [ 426.154246] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.170736] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 426.170743] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 426.250620] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.250658] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.250664] usb 3-1.1: hub failed to enable device, error -22 [ 426.322406] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.322456] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.322462] usb 3-1.1: hub failed to enable device, error -22 [ 426.394430] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.410966] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 426.410974] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 426.490601] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.490629] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.490645] usb 3-1.1: hub failed to enable device, error -22 [ 426.562473] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.562519] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.562525] usb 3-1.1: hub failed to enable device, error -22 [ 426.634527] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.651065] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 426.651074] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 426.730655] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.730700] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.730709] usb 3-1.1: hub failed to enable device, error -22 [ 426.802561] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.802593] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.802599] usb 3-1.1: hub failed to enable device, error -22 [ 426.874510] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.891141] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 426.891149] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 426.970846] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 426.970878] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 426.970887] usb 3-1.1: hub failed to enable device, error -22 [ 427.042644] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.042694] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.042701] usb 3-1.1: hub failed to enable device, error -22 [ 427.114665] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.131237] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 427.131244] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 427.210915] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.210943] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.210951] usb 3-1.1: hub failed to enable device, error -22 [ 427.282706] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.282744] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.282751] usb 3-1.1: hub failed to enable device, error -22 [ 427.354755] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.371370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 427.371378] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 427.371543] sd 8:0:0:0: [sdb] Unhandled error code [ 427.371547] sd 8:0:0:0: [sdb] [ 427.371550] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 427.371553] sd 8:0:0:0: [sdb] CDB: [ 427.371556] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 427.371580] end_request: I/O error, dev sdb, sector 0 [ 427.371586] Buffer I/O error on device sdb, logical block 0 [ 427.458823] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.458849] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.458857] usb 3-1.1: hub failed to enable device, error -22 [ 427.530816] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.530864] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.530869] usb 3-1.1: hub failed to enable device, error -22 [ 427.602820] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.619298] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 427.619306] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 427.699084] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.699130] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.699138] usb 3-1.1: hub failed to enable device, error -22 [ 427.770902] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.770948] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.770955] usb 3-1.1: hub failed to enable device, error -22 [ 427.842934] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.859396] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 427.859405] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 427.939166] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 427.939213] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 427.939220] usb 3-1.1: hub failed to enable device, error -22 [ 428.010993] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.011040] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.011046] usb 3-1.1: hub failed to enable device, error -22 [ 428.083038] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.099547] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 428.099555] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 428.179235] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.179275] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.179282] usb 3-1.1: hub failed to enable device, error -22 [ 428.250985] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.251017] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.251023] usb 3-1.1: hub failed to enable device, error -22 [ 428.323106] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.339641] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 428.339649] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 428.419274] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.419314] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.419321] usb 3-1.1: hub failed to enable device, error -22 [ 428.491155] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.491204] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.491210] usb 3-1.1: hub failed to enable device, error -22 [ 428.563075] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.579599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 428.579605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 428.659436] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.659467] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.659474] usb 3-1.1: hub failed to enable device, error -22 [ 428.731238] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.731270] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.731277] usb 3-1.1: hub failed to enable device, error -22 [ 428.803232] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.819747] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 428.819755] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 428.819930] sd 8:0:0:0: [sdb] Unhandled error code [ 428.819935] sd 8:0:0:0: [sdb] [ 428.819937] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 428.819940] sd 8:0:0:0: [sdb] CDB: [ 428.819942] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 428.819965] end_request: I/O error, dev sdb, sector 0 [ 428.819971] Buffer I/O error on device sdb, logical block 0 [ 428.820030] Dev sdb: unable to read RDB block 0 [ 428.907503] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.907555] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.907562] usb 3-1.1: hub failed to enable device, error -22 [ 428.979334] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 428.979384] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 428.979391] usb 3-1.1: hub failed to enable device, error -22 [ 429.051356] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.067895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 429.067903] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 429.147508] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.147559] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.147566] usb 3-1.1: hub failed to enable device, error -22 [ 429.219385] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.219435] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.219441] usb 3-1.1: hub failed to enable device, error -22 [ 429.291433] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.308026] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 429.308035] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 429.387562] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.387623] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.387630] usb 3-1.1: hub failed to enable device, error -22 [ 429.459494] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.459523] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.459529] usb 3-1.1: hub failed to enable device, error -22 [ 429.531519] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.547938] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 429.547946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 429.627667] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.627695] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.627703] usb 3-1.1: hub failed to enable device, error -22 [ 429.699581] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.699632] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.699638] usb 3-1.1: hub failed to enable device, error -22 [ 429.771579] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.788034] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 429.788042] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 429.867862] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.867914] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.867920] usb 3-1.1: hub failed to enable device, error -22 [ 429.939634] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 429.939685] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 429.939691] usb 3-1.1: hub failed to enable device, error -22 [ 430.011597] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.028032] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 430.028039] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 430.107984] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.108029] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.108037] usb 3-1.1: hub failed to enable device, error -22 [ 430.179755] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.179803] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.179809] usb 3-1.1: hub failed to enable device, error -22 [ 430.251777] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.268366] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 430.268375] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 430.268589] sd 8:0:0:0: [sdb] Unhandled error code [ 430.268596] sd 8:0:0:0: [sdb] [ 430.268599] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 430.268601] sd 8:0:0:0: [sdb] CDB: [ 430.268605] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 430.268618] end_request: I/O error, dev sdb, sector 0 [ 430.268626] Buffer I/O error on device sdb, logical block 0 [ 430.356047] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.356091] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.356099] usb 3-1.1: hub failed to enable device, error -22 [ 430.427810] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.427841] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.427847] usb 3-1.1: hub failed to enable device, error -22 [ 430.499860] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.516379] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 430.516386] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 430.596136] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.596197] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.596204] usb 3-1.1: hub failed to enable device, error -22 [ 430.667858] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.667893] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.667899] usb 3-1.1: hub failed to enable device, error -22 [ 430.739947] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.756582] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 430.756590] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 430.836210] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.836251] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.836280] usb 3-1.1: hub failed to enable device, error -22 [ 430.907970] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.908002] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 430.908009] usb 3-1.1: hub failed to enable device, error -22 [ 430.980029] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 430.996583] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 430.996591] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 431.076315] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.076356] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.076364] usb 3-1.1: hub failed to enable device, error -22 [ 431.148112] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.148162] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.148169] usb 3-1.1: hub failed to enable device, error -22 [ 431.220074] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.236359] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 431.236368] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 431.316468] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.316564] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.316583] usb 3-1.1: hub failed to enable device, error -22 [ 431.388210] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.388251] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.388257] usb 3-1.1: hub failed to enable device, error -22 [ 431.460181] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.476709] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 431.476717] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 431.556418] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.556457] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.556464] usb 3-1.1: hub failed to enable device, error -22 [ 431.628263] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.628291] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.628298] usb 3-1.1: hub failed to enable device, error -22 [ 431.700282] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.716769] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 431.716776] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 431.716919] sd 8:0:0:0: [sdb] Unhandled error code [ 431.716922] sd 8:0:0:0: [sdb] [ 431.716925] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 431.716927] sd 8:0:0:0: [sdb] CDB: [ 431.716929] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 431.716940] end_request: I/O error, dev sdb, sector 0 [ 431.716946] Buffer I/O error on device sdb, logical block 0 [ 431.804416] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.804445] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.804454] usb 3-1.1: hub failed to enable device, error -22 [ 431.876342] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.876373] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 431.876380] usb 3-1.1: hub failed to enable device, error -22 [ 431.948375] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 431.964953] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 431.964961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 432.044587] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.044692] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.044715] usb 3-1.1: hub failed to enable device, error -22 [ 432.116515] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.116608] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.116618] usb 3-1.1: hub failed to enable device, error -22 [ 432.188562] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.205266] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 432.205274] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 432.284661] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.284772] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.284792] usb 3-1.1: hub failed to enable device, error -22 [ 432.356643] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.356745] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.356755] usb 3-1.1: hub failed to enable device, error -22 [ 432.428568] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.444984] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 432.444992] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 432.524797] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.524839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.524847] usb 3-1.1: hub failed to enable device, error -22 [ 432.596591] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.596637] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.596643] usb 3-1.1: hub failed to enable device, error -22 [ 432.668614] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.685125] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 432.685133] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 432.764858] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.764891] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.764898] usb 3-1.1: hub failed to enable device, error -22 [ 432.836678] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.836710] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 432.836716] usb 3-1.1: hub failed to enable device, error -22 [ 432.908673] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 432.925265] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 432.925273] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 433.004927] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.004964] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.004972] usb 3-1.1: hub failed to enable device, error -22 [ 433.076722] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.076752] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.076758] usb 3-1.1: hub failed to enable device, error -22 [ 433.148894] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.165566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 433.165574] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 433.165853] sd 8:0:0:0: [sdb] Unhandled error code [ 433.165860] sd 8:0:0:0: [sdb] [ 433.165862] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 433.165866] sd 8:0:0:0: [sdb] CDB: [ 433.165868] Read(10): 28 00 00 00 00 18 00 00 08 00 [ 433.165880] end_request: I/O error, dev sdb, sector 24 [ 433.165886] Buffer I/O error on device sdb, logical block 3 [ 433.253067] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.253110] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.253118] usb 3-1.1: hub failed to enable device, error -22 [ 433.324850] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.324896] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.324902] usb 3-1.1: hub failed to enable device, error -22 [ 433.396897] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.413463] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 433.413472] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 433.493093] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.493134] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.493142] usb 3-1.1: hub failed to enable device, error -22 [ 433.564917] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.564967] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.564973] usb 3-1.1: hub failed to enable device, error -22 [ 433.636961] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.653487] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 433.653496] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 433.733228] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.733272] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.733279] usb 3-1.1: hub failed to enable device, error -22 [ 433.805015] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.805051] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.805068] usb 3-1.1: hub failed to enable device, error -22 [ 433.877075] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.893612] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 433.893621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 433.973265] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 433.973311] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 433.973319] usb 3-1.1: hub failed to enable device, error -22 [ 434.045111] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.045157] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.045163] usb 3-1.1: hub failed to enable device, error -22 [ 434.117151] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.133649] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 434.133657] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 434.213392] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.213438] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.213446] usb 3-1.1: hub failed to enable device, error -22 [ 434.285189] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.285234] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.285241] usb 3-1.1: hub failed to enable device, error -22 [ 434.357218] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.373767] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 434.373775] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 434.453469] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.453510] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.453517] usb 3-1.1: hub failed to enable device, error -22 [ 434.525223] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.525271] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.525277] usb 3-1.1: hub failed to enable device, error -22 [ 434.597302] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.613813] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 434.613822] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 434.613971] sd 8:0:0:0: [sdb] Unhandled error code [ 434.613975] sd 8:0:0:0: [sdb] [ 434.613978] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 434.613981] sd 8:0:0:0: [sdb] CDB: [ 434.613983] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 434.613997] end_request: I/O error, dev sdb, sector 0 [ 434.614003] Buffer I/O error on device sdb, logical block 0 [ 434.701563] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.701606] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.701614] usb 3-1.1: hub failed to enable device, error -22 [ 434.773365] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.773411] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.773418] usb 3-1.1: hub failed to enable device, error -22 [ 434.845388] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.861956] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 434.861964] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 434.941630] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 434.941675] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 434.941682] usb 3-1.1: hub failed to enable device, error -22 [ 435.013447] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.013493] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.013499] usb 3-1.1: hub failed to enable device, error -22 [ 435.085479] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.102047] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 435.102055] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 435.181709] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.181753] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.181760] usb 3-1.1: hub failed to enable device, error -22 [ 435.253532] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.253582] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.253589] usb 3-1.1: hub failed to enable device, error -22 [ 435.325557] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.342176] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 435.342184] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 435.421796] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.421838] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.421845] usb 3-1.1: hub failed to enable device, error -22 [ 435.493620] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.493667] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.493674] usb 3-1.1: hub failed to enable device, error -22 [ 435.565640] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.582217] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 435.582225] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 435.661884] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.661925] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.661933] usb 3-1.1: hub failed to enable device, error -22 [ 435.733709] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.733755] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.733762] usb 3-1.1: hub failed to enable device, error -22 [ 435.805724] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.822265] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 435.822273] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 435.901984] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.902027] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.902035] usb 3-1.1: hub failed to enable device, error -22 [ 435.973782] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 435.973830] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 435.973837] usb 3-1.1: hub failed to enable device, error -22 [ 436.045805] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.062318] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 436.062326] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 436.062471] sd 8:0:0:0: [sdb] Unhandled error code [ 436.062474] sd 8:0:0:0: [sdb] [ 436.062477] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 436.062480] sd 8:0:0:0: [sdb] CDB: [ 436.062482] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 436.062494] end_request: I/O error, dev sdb, sector 0 [ 436.062501] Buffer I/O error on device sdb, logical block 0 [ 436.062554] sdb: unable to read partition table [ 436.064165] sd 8:0:0:0: [sdb] Attached SCSI disk [ 436.174076] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.174113] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.174119] usb 3-1.1: hub failed to enable device, error -22 [ 436.245883] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.245933] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.245939] usb 3-1.1: hub failed to enable device, error -22 [ 436.317896] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.334439] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 436.334448] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 436.466168] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.466208] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.466215] usb 3-1.1: hub failed to enable device, error -22 [ 436.537948] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.537996] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.538003] usb 3-1.1: hub failed to enable device, error -22 [ 436.610006] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.626548] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 436.626556] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 436.706257] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.706302] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.706309] usb 3-1.1: hub failed to enable device, error -22 [ 436.778077] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.778126] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.778133] usb 3-1.1: hub failed to enable device, error -22 [ 436.850107] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.866674] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 436.866682] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 436.946362] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 436.946403] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 436.946411] usb 3-1.1: hub failed to enable device, error -22 [ 437.018153] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.018199] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.018206] usb 3-1.1: hub failed to enable device, error -22 [ 437.090186] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.106694] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 437.106702] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 437.186420] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.186459] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.186467] usb 3-1.1: hub failed to enable device, error -22 [ 437.258234] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.258281] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.258287] usb 3-1.1: hub failed to enable device, error -22 [ 437.330239] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.346833] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 437.346841] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 437.426519] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.426561] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.426568] usb 3-1.1: hub failed to enable device, error -22 [ 437.498319] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.498366] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.498373] usb 3-1.1: hub failed to enable device, error -22 [ 437.570348] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.586934] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 437.586942] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 437.587214] sd 8:0:0:0: [sdb] Unhandled error code [ 437.587222] sd 8:0:0:0: [sdb] [ 437.587225] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 437.587228] sd 8:0:0:0: [sdb] CDB: [ 437.587230] Read(10): 28 00 57 54 66 00 00 00 08 00 [ 437.587242] end_request: I/O error, dev sdb, sector 1465148928 [ 437.587249] Buffer I/O error on device sdb, logical block 183143616 [ 437.674588] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.674624] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.674631] usb 3-1.1: hub failed to enable device, error -22 [ 437.746402] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.746450] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.746456] usb 3-1.1: hub failed to enable device, error -22 [ 437.818431] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.834978] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 437.834986] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 437.914673] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.914713] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.914721] usb 3-1.1: hub failed to enable device, error -22 [ 437.986494] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 437.986544] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 437.986550] usb 3-1.1: hub failed to enable device, error -22 [ 438.058502] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.075103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 438.075112] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 438.154770] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.154814] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.154821] usb 3-1.1: hub failed to enable device, error -22 [ 438.226580] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.226629] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.226635] usb 3-1.1: hub failed to enable device, error -22 [ 438.298605] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.315163] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 438.315171] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 438.394846] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.394888] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.394895] usb 3-1.1: hub failed to enable device, error -22 [ 438.466659] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.466705] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.466712] usb 3-1.1: hub failed to enable device, error -22 [ 438.538672] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.555224] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 438.555233] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 438.634889] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.634932] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.634939] usb 3-1.1: hub failed to enable device, error -22 [ 438.706747] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.706797] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.706804] usb 3-1.1: hub failed to enable device, error -22 [ 438.778767] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.795333] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 438.795342] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 438.875015] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.875059] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.875067] usb 3-1.1: hub failed to enable device, error -22 [ 438.946825] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 438.946873] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 438.946880] usb 3-1.1: hub failed to enable device, error -22 [ 439.018850] usb 3-1.1: reset high-speed USB device number 4 using xhci_hcd [ 439.018988] usb 3-1.1: Device not responding to setup address. [ 439.222989] usb 3-1.1: Device not responding to setup address. [ 439.426947] usb 3-1.1: device not accepting address 4, error -71 [ 439.443093] sd 8:0:0:0: [sdb] Unhandled error code [ 439.443101] sd 8:0:0:0: [sdb] [ 439.443104] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 439.443108] sd 8:0:0:0: [sdb] CDB: [ 439.443110] Read(10): 28 00 57 54 66 00 00 00 08 00 [ 439.443127] end_request: I/O error, dev sdb, sector 1465148928 [ 439.443145] Buffer I/O error on device sdb, logical block 183143616 [ 439.443177] usb 3-1.1: USB disconnect, device number 4 [ 439.444726] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78a9c0 [ 439.444734] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88030f78aa08 [ 449.390697] usb 4-1.2: new SuperSpeed USB device number 4 using xhci_hcd [ 449.407130] usb 4-1.2: New USB device found, idVendor=152d, idProduct=0569 [ 449.407137] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 449.407141] usb 4-1.2: Product: USB to ATA/ATAPI Bridge [ 449.407144] usb 4-1.2: Manufacturer: JMicron [ 449.407147] usb 4-1.2: SerialNumber: 4A3337343030383448584B595845 [ 449.407653] usb-storage 4-1.2:1.0: USB Mass Storage device detected [ 449.408142] scsi9 : usb-storage 4-1.2:1.0 [ 450.407372] scsi 9:0:0:0: Direct-Access Hitachi HTS727575A9E364 PQ: 0 ANSI: 5 [ 450.408054] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 450.408281] sd 9:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 450.408845] sd 9:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 450.409360] sd 9:0:0:0: [sdb] Asking for cache data failed [ 450.409367] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 450.430687] sdb: sdb1 [ 450.432642] sd 9:0:0:0: [sdb] Attached SCSI disk [ 450.781825] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 497.519570] usb 4-1.2: USB disconnect, device number 4 [ 512.168588] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [ 512.261254] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101 [ 512.261261] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 512.261264] usb 1-1.2: Product: USB 2.0 Hub [ 512.261732] hub 1-1.2:1.0: USB hub found [ 512.261913] hub 1-1.2:1.0: 4 ports detected [ 512.532802] usb 1-1.2.1: new high-speed USB device number 5 using ehci-pci [ 512.626431] usb 1-1.2.1: New USB device found, idVendor=152d, idProduct=0569 [ 512.626437] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 512.626441] usb 1-1.2.1: Product: USB to ATA/ATAPI Bridge [ 512.626443] usb 1-1.2.1: Manufacturer: JMicron [ 512.626446] usb 1-1.2.1: SerialNumber: 4A3337343030383448584B595845 [ 512.627298] usb-storage 1-1.2.1:1.0: USB Mass Storage device detected [ 512.627647] scsi10 : usb-storage 1-1.2.1:1.0 [ 513.626082] scsi 10:0:0:0: Direct-Access Hitachi HTS727575A9E364 PQ: 0 ANSI: 5 [ 513.626850] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 513.627483] sd 10:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 513.629208] sd 10:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 513.631689] sd 10:0:0:0: [sdb] Asking for cache data failed [ 513.631698] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 513.989272] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.169288] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.349275] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.529301] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.709484] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.889505] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 514.982637] sd 10:0:0:0: [sdb] Unhandled error code [ 514.982645] sd 10:0:0:0: [sdb] [ 514.982647] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 514.982650] sd 10:0:0:0: [sdb] CDB: [ 514.982652] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 514.982663] end_request: I/O error, dev sdb, sector 0 [ 514.982669] Buffer I/O error on device sdb, logical block 0 [ 515.061649] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 515.241685] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 515.421707] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 515.601707] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 515.781738] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 515.961913] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 516.054869] sd 10:0:0:0: [sdb] Unhandled error code [ 516.054877] sd 10:0:0:0: [sdb] [ 516.054880] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 516.054882] sd 10:0:0:0: [sdb] CDB: [ 516.054885] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 516.054896] end_request: I/O error, dev sdb, sector 0 [ 516.054901] Buffer I/O error on device sdb, logical block 0 [ 516.133910] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 516.314046] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 516.494113] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 516.674150] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 516.854133] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.034338] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.127176] sd 10:0:0:0: [sdb] Unhandled error code [ 517.127182] sd 10:0:0:0: [sdb] [ 517.127185] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 517.127188] sd 10:0:0:0: [sdb] CDB: [ 517.127190] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 517.127201] end_request: I/O error, dev sdb, sector 0 [ 517.127207] Buffer I/O error on device sdb, logical block 0 [ 517.206346] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.386337] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.566540] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.746545] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 517.926543] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.106594] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.199793] sd 10:0:0:0: [sdb] Unhandled error code [ 518.199801] sd 10:0:0:0: [sdb] [ 518.199804] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 518.199818] sd 10:0:0:0: [sdb] CDB: [ 518.199820] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 518.199831] end_request: I/O error, dev sdb, sector 0 [ 518.199836] Buffer I/O error on device sdb, logical block 0 [ 518.278745] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.458744] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.638773] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.818951] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 518.998817] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 519.178976] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 519.272214] sd 10:0:0:0: [sdb] Unhandled error code [ 519.272222] sd 10:0:0:0: [sdb] [ 519.272225] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 519.272228] sd 10:0:0:0: [sdb] CDB: [ 519.272230] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 519.272243] end_request: I/O error, dev sdb, sector 0 [ 519.272249] Buffer I/O error on device sdb, logical block 0 [ 519.351151] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 519.531195] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 519.711256] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 519.891381] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.071389] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.251407] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.344614] sd 10:0:0:0: [sdb] Unhandled error code [ 520.344621] sd 10:0:0:0: [sdb] [ 520.344624] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 520.344627] sd 10:0:0:0: [sdb] CDB: [ 520.344629] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 520.344641] end_request: I/O error, dev sdb, sector 0 [ 520.344647] Buffer I/O error on device sdb, logical block 0 [ 520.423407] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.603602] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.783609] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 520.963603] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 521.143639] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 521.323815] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 521.416985] sd 10:0:0:0: [sdb] Unhandled error code [ 521.416993] sd 10:0:0:0: [sdb] [ 521.416996] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 521.416998] sd 10:0:0:0: [sdb] CDB: [ 521.417001] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 521.417011] end_request: I/O error, dev sdb, sector 0 [ 521.417017] Buffer I/O error on device sdb, logical block 0 [ 521.495827] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 521.676012] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 521.856037] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.036041] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.216046] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.396093] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.489298] sd 10:0:0:0: [sdb] Unhandled error code [ 522.489306] sd 10:0:0:0: [sdb] [ 522.489308] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 522.489311] sd 10:0:0:0: [sdb] CDB: [ 522.489313] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 522.489324] end_request: I/O error, dev sdb, sector 0 [ 522.489330] Buffer I/O error on device sdb, logical block 0 [ 522.489389] ldm_validate_partition_table(): Disk read failed. [ 522.568239] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.748225] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 522.928268] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 523.108443] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 523.288473] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 523.468494] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 523.561707] sd 10:0:0:0: [sdb] Unhandled error code [ 523.561715] sd 10:0:0:0: [sdb] [ 523.561729] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 523.561731] sd 10:0:0:0: [sdb] CDB: [ 523.561733] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 523.561744] end_request: I/O error, dev sdb, sector 0 [ 523.561750] Buffer I/O error on device sdb, logical block 0 [ 523.640645] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 523.820661] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.000673] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.180857] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.360874] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.540915] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.634281] sd 10:0:0:0: [sdb] Unhandled error code [ 524.634288] sd 10:0:0:0: [sdb] [ 524.634292] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 524.634294] sd 10:0:0:0: [sdb] CDB: [ 524.634297] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 524.634308] end_request: I/O error, dev sdb, sector 0 [ 524.634314] Buffer I/O error on device sdb, logical block 0 [ 524.712896] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 524.893035] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.073069] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.253100] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.433283] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.613306] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.706515] sd 10:0:0:0: [sdb] Unhandled error code [ 525.706522] sd 10:0:0:0: [sdb] [ 525.706525] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 525.706528] sd 10:0:0:0: [sdb] CDB: [ 525.706530] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 525.706541] end_request: I/O error, dev sdb, sector 0 [ 525.706547] Buffer I/O error on device sdb, logical block 0 [ 525.785304] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 525.965329] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 526.145561] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 526.325529] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 526.505531] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 526.685694] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 526.778913] sd 10:0:0:0: [sdb] Unhandled error code [ 526.778921] sd 10:0:0:0: [sdb] [ 526.778924] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 526.778926] sd 10:0:0:0: [sdb] CDB: [ 526.778928] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 526.778939] end_request: I/O error, dev sdb, sector 0 [ 526.778945] Buffer I/O error on device sdb, logical block 0 [ 526.779006] Dev sdb: unable to read RDB block 0 [ 526.857729] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 527.037755] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 527.217762] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 527.397938] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 527.738151] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 527.918129] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.011501] sd 10:0:0:0: [sdb] Unhandled error code [ 528.011509] sd 10:0:0:0: [sdb] [ 528.011512] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 528.011515] sd 10:0:0:0: [sdb] CDB: [ 528.011517] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 528.011528] end_request: I/O error, dev sdb, sector 0 [ 528.011534] Buffer I/O error on device sdb, logical block 0 [ 528.090142] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.270304] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.450328] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.630372] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.810351] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 528.990564] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 529.083612] sd 10:0:0:0: [sdb] Unhandled error code [ 529.083620] sd 10:0:0:0: [sdb] [ 529.083623] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 529.083626] sd 10:0:0:0: [sdb] CDB: [ 529.083628] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 529.083639] end_request: I/O error, dev sdb, sector 0 [ 529.083645] Buffer I/O error on device sdb, logical block 0 [ 529.162553] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 529.342570] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 529.522754] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 529.702756] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 529.882796] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.062965] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.156012] sd 10:0:0:0: [sdb] Unhandled error code [ 530.156020] sd 10:0:0:0: [sdb] [ 530.156023] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 530.156026] sd 10:0:0:0: [sdb] CDB: [ 530.156028] Read(10): 28 00 00 00 00 18 00 00 08 00 [ 530.156039] end_request: I/O error, dev sdb, sector 24 [ 530.156045] Buffer I/O error on device sdb, logical block 3 [ 530.234958] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.414984] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.594981] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.775009] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 530.955151] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 531.135209] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 531.228424] sd 10:0:0:0: [sdb] Unhandled error code [ 531.228432] sd 10:0:0:0: [sdb] [ 531.228436] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 531.228439] sd 10:0:0:0: [sdb] CDB: [ 531.228441] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 531.228453] end_request: I/O error, dev sdb, sector 0 [ 531.228459] Buffer I/O error on device sdb, logical block 0 [ 531.307385] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 531.487389] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 531.667420] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 531.847415] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 532.027616] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 532.207602] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 532.300827] sd 10:0:0:0: [sdb] Unhandled error code [ 532.300835] sd 10:0:0:0: [sdb] [ 532.300837] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 532.300840] sd 10:0:0:0: [sdb] CDB: [ 532.300842] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 532.300853] end_request: I/O error, dev sdb, sector 0 [ 532.300859] Buffer I/O error on device sdb, logical block 0 [ 532.300920] sdb: unable to read partition table [ 532.305706] sd 10:0:0:0: [sdb] Attached SCSI disk [ 532.403671] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 532.711795] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 532.851746] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 532.891791] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.062604] usb 3-4: New USB device found, idVendor=090c, idProduct=1000 [ 533.062612] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 533.062615] usb 3-4: Product: USB Flash Disk [ 533.062618] usb 3-4: Manufacturer: General [ 533.062621] usb 3-4: SerialNumber: 9113000000054407 [ 533.062903] usb 3-4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 533.062914] usb 3-4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 533.063212] usb-storage 3-4:1.0: USB Mass Storage device detected [ 533.063584] scsi11 : usb-storage 3-4:1.0 [ 533.071810] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.256008] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.436020] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.529245] sd 10:0:0:0: [sdb] Unhandled error code [ 533.529253] sd 10:0:0:0: [sdb] [ 533.529257] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 533.529260] sd 10:0:0:0: [sdb] CDB: [ 533.529263] Read(10): 28 00 57 54 66 00 00 00 08 00 [ 533.529275] end_request: I/O error, dev sdb, sector 1465148928 [ 533.529281] Buffer I/O error on device sdb, logical block 183143616 [ 533.612034] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.796231] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 533.980251] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 534.160249] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 534.340268] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 534.345140] scsi 11:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 534.346042] sd 11:0:0:0: Attached scsi generic sg3 type 0 [ 534.346328] sd 11:0:0:0: [sdc] 3932160 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 534.347171] sd 11:0:0:0: [sdc] Write Protect is off [ 534.347179] sd 11:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 534.347970] sd 11:0:0:0: [sdc] No Caching mode page found [ 534.347977] sd 11:0:0:0: [sdc] Assuming drive cache: write through [ 534.351727] sdc: sdc1 [ 534.354340] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 534.520449] usb 1-1.2.1: reset high-speed USB device number 5 using ehci-pci [ 534.612998] sd 10:0:0:0: [sdb] Unhandled error code [ 534.613006] sd 10:0:0:0: [sdb] [ 534.613010] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 534.613013] sd 10:0:0:0: [sdb] CDB: [ 534.613016] Read(10): 28 00 57 54 66 00 00 00 08 00 [ 534.613029] end_request: I/O error, dev sdb, sector 1465148928 [ 534.613035] Buffer I/O error on device sdb, logical block 183143616