[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-35-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:01 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffbf] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003fffffc0-0x000000003fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: M37EW/Intel 852/855GM, BIOS Version 2.08 11/30/04 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b93000, 0x01b93fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34c5c000-0x36625fff] [ 0.000000] ACPI: RSDP 000e4010 000014 (v00 OID_00) [ 0.000000] ACPI: RSDT 3ffffbd0 00002C (v01 OID_00 RSDT_000 30303030 _CSI 00010101) [ 0.000000] ACPI: FACP 3ffffb20 000074 (v01 INSYDE FACP_000 00000100 _CSI 00010101) [ 0.000000] ACPI: DSDT 3fffb1f0 004928 (v01 INSYDE KENORAA3 00001004 MSFT 02000001) [ 0.000000] ACPI: FACS 3fffffc0 000040 [ 0.000000] ACPI: BOOT 3ffffba0 000026 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010101) [ 0.000000] 131MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b94000, 0x01b94fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3ffeffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3ffeffff] [ 0.000000] On node 0 totalpages: 262030 [ 0.000000] free_area_init_node: node 0, pgdat c199b440, node_mem_map f73fe020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 264 pages used for memmap [ 0.000000] HighMem zone: 33778 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f73e9000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260246 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=90e0ae96-5fe8-46a1-8b30-a60328e30f04 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2097016 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0) [ 0.000000] Memory: 998656K/1048120K available (6537K kernel code, 644K rwdata, 2764K rodata, 872K init, 924K bss, 49464K reserved, 135112K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b9000 - 0xc1a93000 ( 872 kB) [ 0.000000] .data : 0xc16627f2 - 0xc19b8200 (3414 kB) [ 0.000000] .text : 0xc1000000 - 0xc16627f2 (6537 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1699.855 MHz processor [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3399.71 BogoMIPS (lpj=6799420) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004061] Security Framework initialized [ 0.004097] AppArmor: AppArmor initialized [ 0.004100] Yama: becoming mindful. [ 0.004221] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004225] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004676] Initializing cgroup subsys memory [ 0.004694] Initializing cgroup subsys devices [ 0.004698] Initializing cgroup subsys freezer [ 0.004703] Initializing cgroup subsys blkio [ 0.004707] Initializing cgroup subsys perf_event [ 0.004712] Initializing cgroup subsys hugetlb [ 0.004754] Disabled fast string operations [ 0.004766] mce: CPU supports 5 MCE banks [ 0.004799] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.004799] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8 [ 0.004799] tlb_flushall_shift: 6 [ 0.020305] Freeing SMP alternatives memory: 32K (c1a93000 - c1a9b000) [ 0.022348] ACPI: Core revision 20131115 [ 0.025885] ACPI: All ACPI Tables successfully acquired [ 0.025894] ACPI: setting ELCR to 0200 (from 0c00) [ 0.028007] ftrace: allocating 27825 entries in 55 pages [ 0.040165] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.040173] smpboot: SMP motherboard not detected [ 0.040176] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.040178] smpboot: SMP disabled [ 0.040196] Performance Events: [ 0.040202] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.040203] no hardware sampling interrupt available. [ 0.040207] p6 PMU driver. [ 0.040211] ... version: 0 [ 0.040213] ... bit width: 32 [ 0.040215] ... generic registers: 2 [ 0.040217] ... value mask: 00000000ffffffff [ 0.040219] ... max period: 000000007fffffff [ 0.040221] ... fixed-purpose events: 0 [ 0.040223] ... event mask: 0000000000000003 [ 0.043006] x86: Booted up 1 node, 1 CPUs [ 0.043012] smpboot: Total of 1 processors activated (3399.71 BogoMIPS) [ 0.043102] NMI watchdog: disabled (cpu0): not supported (no LAPIC?) [ 0.043265] devtmpfs: initialized [ 0.044263] EVM: security.selinux [ 0.044265] EVM: security.SMACK64 [ 0.044267] EVM: security.ima [ 0.044269] EVM: security.capability [ 0.044408] PM: Registering ACPI NVS region [mem 0x3fffffc0-0x3fffffff] (64 bytes) [ 0.046297] pinctrl core: initialized pinctrl subsystem [ 0.046417] regulator-dummy: no parameters [ 0.046452] RTC time: 9:58:19, date: 09/14/14 [ 0.046517] NET: Registered protocol family 16 [ 0.046779] EISA bus registered [ 0.046783] cpuidle: using governor ladder [ 0.046785] cpuidle: using governor menu [ 0.046911] ACPI: bus type PCI registered [ 0.046915] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.047090] PCI: PCI BIOS revision 2.10 entry at 0xeb900, last bus=2 [ 0.047093] PCI: Using configuration type 1 for base access [ 0.048966] bio: create slab at 0 [ 0.049193] ACPI: Added _OSI(Module Device) [ 0.049196] ACPI: Added _OSI(Processor Device) [ 0.049198] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.049201] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053851] ACPI: Interpreter enabled [ 0.053868] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.053874] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.053895] ACPI: (supports S0 S3 S4 S5) [ 0.053897] ACPI: Using PIC for interrupt routing [ 0.053923] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.054083] ACPI: No dock devices found. [ 0.059435] ACPI: Power Resource [PUT2] (on) [ 0.060962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.060973] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.060981] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.061037] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.061041] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.061045] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.061049] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.061052] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) [ 0.061056] acpi PNP0A03:00: host bridge window [mem 0xffb80000-0xffbfffff] (ignored) [ 0.061059] acpi PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored) [ 0.061063] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfff7ffff] (ignored) [ 0.061066] PCI: root bus 00: using default resources [ 0.061071] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.061260] PCI host bridge to bus 0000:00 [ 0.061265] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.061269] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.061273] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.061288] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000 [ 0.061300] pci 0000:00:00.0: reg 0x10: [mem 0xa0000000-0xa3ffffff pref] [ 0.061424] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400 [ 0.061567] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.061615] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f] [ 0.061712] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.061771] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.061818] pci 0000:00:1d.1: reg 0x20: [io 0xe120-0xe13f] [ 0.061913] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.061973] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.062021] pci 0000:00:1d.2: reg 0x20: [io 0xe240-0xe25f] [ 0.062116] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.062182] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.062207] pci 0000:00:1d.7: reg 0x10: [mem 0xf0000000-0xf00003ff] [ 0.062306] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.062366] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.062420] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400 [ 0.062510] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.062561] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100 [ 0.062632] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] [ 0.062639] pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH4 GPIO [ 0.062735] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a [ 0.062751] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.062763] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.062774] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.062785] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.062796] pci 0000:00:1f.1: reg 0x20: [io 0x1100-0x110f] [ 0.062808] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff] [ 0.062919] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.062937] pci 0000:00:1f.5: reg 0x10: [io 0xe400-0xe4ff] [ 0.062948] pci 0000:00:1f.5: reg 0x14: [io 0xe600-0xe63f] [ 0.062959] pci 0000:00:1f.5: reg 0x18: [mem 0xf0000400-0xf00005ff] [ 0.062969] pci 0000:00:1f.5: reg 0x1c: [mem 0xf0000600-0xf00006ff] [ 0.063019] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.063124] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300 [ 0.063141] pci 0000:00:1f.6: reg 0x10: [io 0xe800-0xe8ff] [ 0.063152] pci 0000:00:1f.6: reg 0x14: [io 0xea00-0xea7f] [ 0.063216] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.063271] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 0.063362] pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000 [ 0.063379] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x97ffffff pref] [ 0.063388] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff] [ 0.063398] pci 0000:01:00.0: reg 0x18: [mem 0xe0000000-0xe000ffff] [ 0.063424] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.063455] pci 0000:01:00.0: supports D1 D2 [ 0.063532] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.063537] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff] [ 0.063542] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.063546] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref] [ 0.063692] pci 0000:02:00.0: [10ec:8169] type 00 class 0x020000 [ 0.063711] pci 0000:02:00.0: reg 0x10: [io 0xa200-0xa2ff] [ 0.063722] pci 0000:02:00.0: reg 0x14: [mem 0xd0008000-0xd00080ff] [ 0.063763] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.063792] pci 0000:02:00.0: supports D1 D2 [ 0.063795] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.063888] pci 0000:02:02.0: [104c:8026] type 00 class 0x0c0010 [ 0.063908] pci 0000:02:02.0: reg 0x10: [mem 0xd0001000-0xd00017ff] [ 0.063919] pci 0000:02:02.0: reg 0x14: [mem 0xd0004000-0xd0007fff] [ 0.063987] pci 0000:02:02.0: supports D1 D2 [ 0.063990] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot [ 0.064095] pci 0000:02:03.0: [8086:4220] type 00 class 0x028000 [ 0.064114] pci 0000:02:03.0: reg 0x10: [mem 0xd0000000-0xd0000fff] [ 0.064190] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.064288] pci 0000:02:09.0: [104c:ac54] type 02 class 0x060700 [ 0.064307] pci 0000:02:09.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.064338] pci 0000:02:09.0: supports D1 D2 [ 0.064341] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.064436] pci 0000:02:09.1: [104c:ac54] type 02 class 0x060700 [ 0.064455] pci 0000:02:09.1: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.064485] pci 0000:02:09.1: supports D1 D2 [ 0.064488] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.064576] pci 0000:02:09.2: [104c:8201] type 00 class 0x088000 [ 0.064593] pci 0000:02:09.2: reg 0x10: [io 0xa000-0xa03f] [ 0.064761] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.064768] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff] [ 0.064773] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] [ 0.064779] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x8fffffff pref] [ 0.064783] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.064787] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.064792] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.064801] pci 0000:02:09.1: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.064855] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02] (conflicts with (null) [bus 02]) [ 0.064863] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06 [ 0.064867] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02] (conflicts with (null) [bus 02]) [ 0.064873] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02] [ 0.064928] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 02] (conflicts with (null) [bus 02]) [ 0.064934] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a [ 0.064938] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 02] (conflicts with (null) [bus 02]) [ 0.064944] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02] [ 0.064957] pci_bus 0000:00: on NUMA node 0 [ 0.065646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11) [ 0.065737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11) [ 0.065825] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11) [ 0.065912] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11) [ 0.065991] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.066071] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.066151] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.066239] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11) [ 0.066373] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.066386] ACPI: \_SB_.PCI0: notify handler is installed [ 0.066436] Found 1 acpi root devices [ 0.066497] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.066664] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.066668] vgaarb: loaded [ 0.066670] vgaarb: bridge control possible 0000:01:00.0 [ 0.067041] SCSI subsystem initialized [ 0.067104] libata version 3.00 loaded. [ 0.067144] ACPI: bus type USB registered [ 0.067176] usbcore: registered new interface driver usbfs [ 0.067196] usbcore: registered new interface driver hub [ 0.067228] usbcore: registered new device driver usb [ 0.067388] PCI: Using ACPI for IRQ routing [ 0.067392] PCI: pci_cache_line_size set to 64 bytes [ 0.067448] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.067452] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff] [ 0.067618] NetLabel: Initializing [ 0.067621] NetLabel: domain hash size = 128 [ 0.067622] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.067648] NetLabel: unlabeled traffic allowed by default [ 0.067844] Switched to clocksource pit [ 0.076592] AppArmor: AppArmor Filesystem Enabled [ 0.076670] pnp: PnP ACPI init [ 0.076699] ACPI: bus type PNP registered [ 0.076983] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.077033] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.077078] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.077130] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.077226] system 00:04: [mem 0xfff80000-0xffffffff] could not be reserved [ 0.077232] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.077260] pnp 00:05: [dma 4] [ 0.077294] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.077371] system 00:06: [io 0x0120-0x012f] has been reserved [ 0.077376] system 00:06: [io 0x1000-0x107f] could not be reserved [ 0.077380] system 00:06: [io 0x1300-0x133f] has been reserved [ 0.077385] system 00:06: [io 0x1400-0x141f] has been reserved [ 0.077389] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.077436] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.077503] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.077955] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.078344] pnp 00:0a: [dma 3] [ 0.078478] pnp 00:0a: Plug and Play ACPI device, IDs NSC6001 (active) [ 0.078643] pnp: PnP ACPI: found 11 devices [ 0.078645] ACPI: bus type PNP unregistered [ 0.078651] PnPBIOS: Disabled by ACPI PNP [ 0.115839] Switched to clocksource acpi_pm [ 0.115878] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment [ 0.115891] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 0.115902] pci 0000:01:00.0: BAR 6: assigned [mem 0x98000000-0x9801ffff pref] [ 0.115906] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.115910] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff] [ 0.115916] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.115921] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref] [ 0.115936] pci 0000:02:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.115940] pci 0000:02:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.115944] pci 0000:02:09.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.115948] pci 0000:02:09.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.115952] pci 0000:02:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.115956] pci 0000:02:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.115960] pci 0000:02:09.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.115963] pci 0000:02:09.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.115968] pci 0000:02:09.0: BAR 0: assigned [mem 0xd4000000-0xd4000fff] [ 0.115974] pci 0000:02:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.115979] pci 0000:02:09.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] [ 0.115983] pci 0000:02:09.1: BAR 0: assigned [mem 0xdc000000-0xdc000fff] [ 0.115990] pci 0000:02:09.1: BAR 15: assigned [mem 0x84000000-0x87ffffff pref] [ 0.115995] pci 0000:02:09.1: BAR 16: assigned [mem 0x44000000-0x47ffffff] [ 0.115999] pci 0000:02:00.0: BAR 6: assigned [mem 0x88000000-0x8801ffff pref] [ 0.116003] pci 0000:02:09.0: BAR 13: assigned [io 0xa400-0xa4ff] [ 0.116007] pci 0000:02:09.0: BAR 14: assigned [io 0xa800-0xa8ff] [ 0.116011] pci 0000:02:09.1: BAR 13: assigned [io 0xac00-0xacff] [ 0.116015] pci 0000:02:09.1: BAR 14: assigned [io 0xb000-0xb0ff] [ 0.116020] pci 0000:02:09.0: CardBus bridge to [bus 03-06] [ 0.116023] pci 0000:02:09.0: bridge window [io 0xa400-0xa4ff] [ 0.116029] pci 0000:02:09.0: bridge window [io 0xa800-0xa8ff] [ 0.116035] pci 0000:02:09.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.116040] pci 0000:02:09.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.116046] pci 0000:02:09.1: CardBus bridge to [bus 07-0a] [ 0.116049] pci 0000:02:09.1: bridge window [io 0xac00-0xacff] [ 0.116054] pci 0000:02:09.1: bridge window [io 0xb000-0xb0ff] [ 0.116060] pci 0000:02:09.1: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.116066] pci 0000:02:09.1: bridge window [mem 0x44000000-0x47ffffff] [ 0.116071] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.116075] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff] [ 0.116082] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] [ 0.116088] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x8fffffff pref] [ 0.116097] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.116101] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.116105] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff] [ 0.116108] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff] [ 0.116112] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref] [ 0.116116] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff] [ 0.116120] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xdfffffff] [ 0.116123] pci_bus 0000:02: resource 2 [mem 0x80000000-0x8fffffff pref] [ 0.116127] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.116130] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] [ 0.116135] pci_bus 0000:03: resource 0 [io 0xa400-0xa4ff] [ 0.116138] pci_bus 0000:03: resource 1 [io 0xa800-0xa8ff] [ 0.116142] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.116146] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] [ 0.116149] pci_bus 0000:07: resource 0 [io 0xac00-0xacff] [ 0.116186] pci_bus 0000:07: resource 1 [io 0xb000-0xb0ff] [ 0.116190] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.116194] pci_bus 0000:07: resource 3 [mem 0x44000000-0x47ffffff] [ 0.116260] NET: Registered protocol family 2 [ 0.116585] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.116631] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.116707] TCP: Hash tables configured (established 8192 bind 8192) [ 0.116769] TCP: reno registered [ 0.116773] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.116797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.116908] NET: Registered protocol family 1 [ 0.117123] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.117127] PCI: setting IRQ 10 as level-triggered [ 0.117297] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.117299] PCI: setting IRQ 11 as level-triggered [ 0.117463] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.117626] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.117708] pci 0000:01:00.0: Boot video device [ 0.117730] PCI: CLS 16 bytes, default 64 [ 0.117822] Trying to unpack rootfs image as initramfs... [ 0.942661] Freeing initrd memory: 26408K (f4c5c000 - f6626000) [ 0.942873] Simple Boot Flag at 0x37 set to 0x1 [ 0.943033] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17 [ 0.943148] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.943153] Scanning for low memory corruption every 60 seconds [ 0.943619] Initialise system trusted keyring [ 0.943701] audit: initializing netlink socket (disabled) [ 0.943726] type=2000 audit(1410688698.939:1): initialized [ 0.978070] bounce pool size: 64 pages [ 0.978088] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.980431] zbud: loaded [ 0.980534] VFS: Disk quotas dquot_6.5.2 [ 0.980616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.981387] fuse init (API version 7.22) [ 0.981519] msgmni has been set to 1738 [ 0.981619] Key type big_key registered [ 0.981984] Key type asymmetric registered [ 0.981988] Asymmetric key parser 'x509' registered [ 0.982045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.982082] io scheduler noop registered [ 0.982085] io scheduler deadline registered (default) [ 0.982132] io scheduler cfq registered [ 0.982335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.982360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.982433] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.982436] vesafb: scrolling: redraw [ 0.982439] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.982683] vesafb: framebuffer at 0x90000000, mapped to 0xf8480000, using 3072k, total 3072k [ 1.042352] Console: switching to colour frame buffer device 128x48 [ 1.101882] fb0: VESA VGA frame buffer device [ 1.101928] intel_idle: does not run on family 6 model 13 [ 1.101939] ipmi message handler version 39.2 [ 1.102035] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.102117] ACPI: AC Adapter [AC] (on-line) [ 1.102284] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.102294] ACPI: Sleep Button [SLPB] [ 1.102358] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.102362] ACPI: Power Button [PWRB] [ 1.102429] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.102447] ACPI: Lid Switch [LID0] [ 1.102506] tsc: Marking TSC unstable due to TSC halts in idle [ 1.102519] ACPI: acpi_idle registered with cpuidle [ 1.102664] GHES: HEST is not enabled! [ 1.102782] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.123210] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.123298] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.123307] ACPI: Battery Slot [BAT0] (battery absent) [ 1.123343] isapnp: Scanning for PnP cards... [ 1.172566] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A [ 1.174422] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.174639] Linux agpgart interface v0.103 [ 1.174756] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.178970] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xa0000000 [ 1.181359] brd: module loaded [ 1.182573] loop: module loaded [ 1.182787] ata_piix 0000:00:1f.1: version 2.13 [ 1.182800] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.184047] scsi0 : ata_piix [ 1.184140] scsi1 : ata_piix [ 1.184202] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 1.184205] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 1.184734] libphy: Fixed MDIO Bus: probed [ 1.184906] tun: Universal TUN/TAP device driver, 1.6 [ 1.184908] tun: (C) 1999-2004 Max Krasnyansky [ 1.184989] PPP generic driver version 2.4.2 [ 1.185053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185059] ehci-pci: EHCI PCI platform driver [ 1.185133] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.185143] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.185161] ehci-pci 0000:00:1d.7: debug port 1 [ 1.189070] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported [ 1.189291] ehci-pci 0000:00:1d.7: irq 11, io mem 0xf0000000 [ 1.232852] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.276577] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.276581] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.276584] usb usb1: Product: EHCI Host Controller [ 1.276588] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd [ 1.276591] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.276740] hub 1-0:1.0: USB hub found [ 1.276752] hub 1-0:1.0: 6 ports detected [ 1.276969] ehci-platform: EHCI generic platform driver [ 1.276981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.276984] ohci-pci: OHCI PCI platform driver [ 1.277000] ohci-platform: OHCI generic platform driver [ 1.277011] uhci_hcd: USB Universal Host Controller Interface driver [ 1.277064] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.277071] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.277096] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e000 [ 1.277160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.277163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.277167] usb usb2: Product: UHCI Host Controller [ 1.277170] usb usb2: Manufacturer: Linux 3.13.0-35-generic uhci_hcd [ 1.277173] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.277307] hub 2-0:1.0: USB hub found [ 1.277318] hub 2-0:1.0: 2 ports detected [ 1.277477] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.277488] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.277510] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e120 [ 1.277574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.277578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.277582] usb usb3: Product: UHCI Host Controller [ 1.277585] usb usb3: Manufacturer: Linux 3.13.0-35-generic uhci_hcd [ 1.277588] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.277720] hub 3-0:1.0: USB hub found [ 1.277730] hub 3-0:1.0: 2 ports detected [ 1.277883] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.277891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.277913] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e240 [ 1.277974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.277978] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.277982] usb usb4: Product: UHCI Host Controller [ 1.277985] usb usb4: Manufacturer: Linux 3.13.0-35-generic uhci_hcd [ 1.277988] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.278124] hub 4-0:1.0: USB hub found [ 1.278134] hub 4-0:1.0: 2 ports detected [ 1.278357] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.281061] i8042: Detected active multiplexing controller, rev 1.1 [ 1.282178] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.282186] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.282224] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.282257] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.282292] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.282438] mousedev: PS/2 mouse device common for all mice [ 1.282764] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.282783] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 1.282895] device-mapper: uevent: version 1.0.3 [ 1.282994] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.283023] platform eisa.0: Probing EISA bus 0 [ 1.283032] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.283069] platform eisa.0: EISA: Detected 0 cards [ 1.283078] cpufreq-nforce2: No nForce2 chipset. [ 1.283082] ledtrig-cpu: registered to indicate activity on CPUs [ 1.283292] TCP: cubic registered [ 1.283462] NET: Registered protocol family 10 [ 1.283768] NET: Registered protocol family 17 [ 1.283783] Key type dns_resolver registered [ 1.283996] Using IPI No-Shortcut mode [ 1.284124] Loading compiled-in X.509 certificates [ 1.290320] Loaded X.509 cert 'Magrathea: Glacier signing key: a28db5fd6e299cce4947dacaa66f459db4acce24' [ 1.290342] registered taskstats version 1 [ 1.380791] Key type trusted registered [ 1.469038] isapnp: No Plug & Play device found [ 1.470222] Key type encrypted registered [ 1.472590] AppArmor: AppArmor sha1 policy hashing enabled [ 1.472595] IMA: No TPM chip found, activating TPM-bypass! [ 1.472882] regulator-dummy: disabling [ 1.472932] Magic number: 14:465:980 [ 1.473067] rtc_cmos 00:02: setting system clock to 2014-09-14 09:58:20 UTC (1410688700) [ 1.473330] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.473333] EDD information not available. [ 1.473377] PM: Hibernation image not present or could not be loaded. [ 1.474195] ata2.00: ATAPI: SlimtypeDVD A DS8A1P, CX17, max UDMA/33 [ 1.474323] ata1.00: ATA-7: SAMSUNG MP0804H, UE100-11, max UDMA/100 [ 1.474327] ata1.00: 156368016 sectors, multi 16: LBA48 [ 1.480423] ata1.00: configured for UDMA/100 [ 1.480602] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0804H UE10 PQ: 0 ANSI: 5 [ 1.480848] sd 0:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.480934] sd 0:0:0:0: [sda] Write Protect is off [ 1.480938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.480974] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.481358] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.485122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.512194] ata2.00: configured for UDMA/33 [ 1.514034] sda: sda1 sda2 < sda5 > [ 1.514426] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.516063] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A1P CX17 PQ: 0 ANSI: 5 [ 1.521481] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.521485] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.521603] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.521676] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.522272] Freeing unused kernel memory: 872K (c19b9000 - c1a93000) [ 1.522330] Write protecting the kernel text: 6540k [ 1.522433] Write protecting the kernel read-only data: 2768k [ 1.544275] systemd-udevd[96]: starting version 204 [ 1.608431] [drm] Initialized drm 1.1.0 20060810 [ 1.642999] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.643146] r8169 0000:02:00.0 (unregistered net_device): not PCI Express [ 1.643509] r8169 0000:02:00.0 eth0: RTL8110s at 0xf8422000, 00:90:f5:3a:5c:62, XID 04000000 IRQ 10 [ 1.643513] r8169 0000:02:00.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 1.885041] firewire_ohci 0000:02:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.914098] [drm] radeon kernel modesetting enabled. [ 1.914179] checking generic (90000000 300000) vs hw (90000000 8000000) [ 1.914182] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 1.914215] Console: switching to colour dummy device 80x25 [ 1.916435] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1558:0x0471). [ 1.916462] [drm] register mmio base: 0xE0000000 [ 1.916464] [drm] register mmio size: 65536 [ 1.916636] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 1.916648] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 1.916681] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 1.916713] radeon 0000:01:00.0: GTT: 64M 0xA0000000 - 0xA3FFFFFF [ 1.916717] [drm] Generation 2 PCI interface, using max accessible memory [ 1.916723] radeon 0000:01:00.0: VRAM: 128M 0x0000000090000000 - 0x0000000097FFFFFF (128M used) [ 1.917112] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.917119] [drm] RAM width 128bits DDR [ 1.917232] [TTM] Zone kernel: Available graphics memory: 445428 kiB [ 1.917234] [TTM] Zone highmem: Available graphics memory: 512984 kiB [ 1.917237] [TTM] Initializing pool allocator [ 1.917243] [TTM] Initializing DMA pool allocator [ 1.917282] [drm] radeon: 128M of VRAM memory ready [ 1.917285] [drm] radeon: 64M of GTT memory ready. [ 1.917330] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 1.918382] radeon 0000:01:00.0: WB disabled [ 1.918396] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xf83fe000 [ 1.918400] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.918402] [drm] Driver supports precise vblank timestamp query. [ 1.918420] [drm] radeon: irq initialized. [ 1.918443] [drm] Loading R300 Microcode [ 1.918777] [drm] radeon: ring at 0x00000000A0001000 [ 1.918802] [drm] ring test succeeded in 1 usecs [ 1.919054] [drm] ib test succeeded in 0 usecs [ 1.919541] [drm] Panel ID String: Samsung LTN154X1 WXGA [ 1.919544] [drm] Panel Size 1280x800 [ 1.939685] [drm] radeon legacy LVDS backlight initialized [ 1.939688] [drm] Radeon Display Connectors [ 1.939690] [drm] Connector 0: [ 1.939692] [drm] VGA-1 [ 1.939696] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 1.939697] [drm] Encoders: [ 1.939699] [drm] CRT1: INTERNAL_DAC1 [ 1.939702] [drm] Connector 1: [ 1.939704] [drm] LVDS-1 [ 1.939706] [drm] Encoders: [ 1.939707] [drm] LCD1: INTERNAL_LVDS [ 1.939709] [drm] Connector 2: [ 1.939711] [drm] SVIDEO-1 [ 1.939713] [drm] Encoders: [ 1.939715] [drm] TV1: INTERNAL_DAC2 [ 1.996299] [drm] fb mappable at 0x90040000 [ 1.996302] [drm] vram apper at 0x90000000 [ 1.996304] [drm] size 4096000 [ 1.996306] [drm] fb depth is 24 [ 1.996308] [drm] pitch is 5120 [ 1.996519] fbcon: radeondrmfb (fb0) is primary device [ 2.028094] Console: switching to colour frame buffer device 160x50 [ 2.051560] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 2.051564] radeon 0000:01:00.0: registered panic notifier [ 2.051576] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 2.384124] firewire_core 0000:02:02.0: created device fw0: GUID 0090f501003a5c62, S400 [ 2.810421] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0/0x0, board id: 3655, fw id: 20803 [ 2.852241] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 3.570852] ata1: drained 65536 bytes to clear DRQ [ 3.630861] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 3.630865] ata1.00: BMDMA stat 0x25 [ 3.630869] ata1.00: failed command: READ DMA [ 3.630878] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 3.630878] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 3.630882] ata1.00: status: { DRDY DRQ ERR } [ 3.630884] ata1.00: error: { UNC } [ 3.630912] ata1: soft resetting link [ 3.800527] ata1.00: configured for UDMA/100 [ 3.800538] ata1: EH complete [ 5.210626] ata1: drained 65536 bytes to clear DRQ [ 5.270624] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 5.270627] ata1.00: BMDMA stat 0x25 [ 5.270631] ata1.00: failed command: READ DMA [ 5.270638] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 5.270638] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 5.270642] ata1.00: status: { DRDY DRQ ERR } [ 5.270645] ata1.00: error: { UNC } [ 5.270667] ata1: soft resetting link [ 5.440527] ata1.00: configured for UDMA/100 [ 5.440534] ata1: EH complete [ 6.861479] ata1: drained 65536 bytes to clear DRQ [ 6.921479] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 6.921482] ata1.00: BMDMA stat 0x25 [ 6.921486] ata1.00: failed command: READ DMA [ 6.921493] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 6.921493] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 6.921497] ata1.00: status: { DRDY DRQ ERR } [ 6.921500] ata1.00: error: { UNC } [ 6.921522] ata1: soft resetting link [ 7.092529] ata1.00: configured for UDMA/100 [ 7.092536] ata1: EH complete [ 8.556653] ata1: drained 65536 bytes to clear DRQ [ 8.616631] ata1.00: limiting speed to UDMA/66:PIO4 [ 8.616635] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8.616638] ata1.00: BMDMA stat 0x25 [ 8.616641] ata1.00: failed command: READ DMA [ 8.616649] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 8.616649] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 8.616653] ata1.00: status: { DRDY DRQ ERR } [ 8.616656] ata1.00: error: { UNC } [ 8.616678] ata1: soft resetting link [ 8.788522] ata1.00: configured for UDMA/66 [ 8.788529] ata1: EH complete [ 10.240744] ata1: drained 65536 bytes to clear DRQ [ 10.300726] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 10.300729] ata1.00: BMDMA stat 0x25 [ 10.300733] ata1.00: failed command: READ DMA [ 10.300740] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 10.300740] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 10.300744] ata1.00: status: { DRDY DRQ ERR } [ 10.300747] ata1.00: error: { UNC } [ 10.300769] ata1: soft resetting link [ 10.472528] ata1.00: configured for UDMA/66 [ 10.472535] ata1: EH complete [ 11.924836] ata1: drained 65536 bytes to clear DRQ [ 11.984812] ata1.00: limiting speed to UDMA/33:PIO4 [ 11.984816] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 11.984819] ata1.00: BMDMA stat 0x25 [ 11.984822] ata1.00: failed command: READ DMA [ 11.984830] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 11.984830] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 11.984834] ata1.00: status: { DRDY DRQ ERR } [ 11.984837] ata1.00: error: { UNC } [ 11.984859] ata1: soft resetting link [ 12.156529] ata1.00: configured for UDMA/33 [ 12.156539] sd 0:0:0:0: [sda] Unhandled sense code [ 12.156543] sd 0:0:0:0: [sda] [ 12.156546] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 12.156549] sd 0:0:0:0: [sda] [ 12.156551] Sense Key : Medium Error [current] [descriptor] [ 12.156555] Descriptor sense data with sense descriptors (in hex): [ 12.156557] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 12.156569] 09 51 f9 00 [ 12.156575] sd 0:0:0:0: [sda] [ 12.156579] Add. Sense: Unrecovered read error - auto reallocate failed [ 12.156583] sd 0:0:0:0: [sda] CDB: [ 12.156585] Read(10): 28 00 09 51 f9 00 00 00 08 00 [ 12.156596] end_request: I/O error, dev sda, sector 156367104 [ 12.156600] Buffer I/O error on device sda, logical block 19545888 [ 12.156608] ata1: EH complete [ 13.620008] ata1: drained 65536 bytes to clear DRQ [ 13.679988] ata1.00: limiting speed to PIO4 [ 13.679992] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 13.679994] ata1.00: BMDMA stat 0x25 [ 13.679998] ata1.00: failed command: READ DMA [ 13.680005] ata1.00: cmd c8/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 dma 4096 in [ 13.680005] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x2 (HSM violation) [ 13.680025] ata1.00: status: { DRDY DRQ ERR } [ 13.680028] ata1.00: error: { UNC } [ 13.680050] ata1: soft resetting link [ 13.852523] ata1.00: configured for PIO4 [ 13.852531] ata1: EH complete [ 15.304201] ata1: drained 65536 bytes to clear DRQ [ 15.376026] ata1.00: limiting speed to PIO3 [ 15.376030] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 15.376033] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 15.376037] ata1.00: failed command: READ MULTIPLE [ 15.376045] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 15.376045] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 15.376049] ata1.00: status: { DRDY DRQ ERR } [ 15.376052] ata1.00: error: { UNC } [ 15.376074] ata1: soft resetting link [ 15.548533] ata1.00: configured for PIO3 [ 15.548540] ata1: EH complete [ 16.999268] ata1: drained 65536 bytes to clear DRQ [ 17.071166] ata1.00: limiting speed to PIO0 [ 17.071170] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 17.071173] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 17.071176] ata1.00: failed command: READ MULTIPLE [ 17.071184] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 17.071184] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 17.071188] ata1.00: status: { DRDY DRQ ERR } [ 17.071191] ata1.00: error: { UNC } [ 17.071213] ata1: soft resetting link [ 17.240649] ata1.00: configured for PIO0 [ 17.240656] ata1: EH complete [ 18.718510] ata1: drained 65536 bytes to clear DRQ [ 18.783392] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 18.783395] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 18.783399] ata1.00: failed command: READ MULTIPLE [ 18.783407] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 18.783407] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 18.783411] ata1.00: status: { DRDY DRQ ERR } [ 18.783413] ata1.00: error: { UNC } [ 18.783436] ata1: soft resetting link [ 18.952651] ata1.00: configured for PIO0 [ 18.952658] ata1: EH complete [ 20.400687] ata1: drained 65536 bytes to clear DRQ [ 20.478451] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 20.478454] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 20.478457] ata1.00: failed command: READ MULTIPLE [ 20.478465] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 20.478465] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 20.478469] ata1.00: status: { DRDY DRQ ERR } [ 20.478472] ata1.00: error: { UNC } [ 20.478494] ata1: soft resetting link [ 20.648640] ata1.00: configured for PIO0 [ 20.648647] ata1: EH complete [ 22.108745] ata1: drained 65536 bytes to clear DRQ [ 22.173621] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 22.173624] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 22.173628] ata1.00: failed command: READ MULTIPLE [ 22.173636] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 22.173636] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 22.173640] ata1.00: status: { DRDY DRQ ERR } [ 22.173642] ata1.00: error: { UNC } [ 22.173665] ata1: soft resetting link [ 22.344651] ata1.00: configured for PIO0 [ 22.344659] sd 0:0:0:0: [sda] Unhandled sense code [ 22.344662] sd 0:0:0:0: [sda] [ 22.344664] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 22.344667] sd 0:0:0:0: [sda] [ 22.344669] Sense Key : Medium Error [current] [descriptor] [ 22.344673] Descriptor sense data with sense descriptors (in hex): [ 22.344675] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 22.344686] 09 51 f9 00 [ 22.344692] sd 0:0:0:0: [sda] [ 22.344696] Add. Sense: Unrecovered read error - auto reallocate failed [ 22.344699] sd 0:0:0:0: [sda] CDB: [ 22.344701] Read(10): 28 00 09 51 f9 00 00 00 08 00 [ 22.344710] end_request: I/O error, dev sda, sector 156367104 [ 22.344713] Buffer I/O error on device sda, logical block 19545888 [ 22.344722] ata1: EH complete [ 23.059428] random: nonblocking pool is initialized [ 31.091644] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 42.428057] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 43.523993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.651261] systemd-udevd[315]: starting version 204 [ 49.381914] lp: driver loaded but no devices found [ 49.798571] ppdev: user-space parallel port driver [ 62.154976] intel_rng: Firmware space is locked read-only. If you can't or [ 62.154976] intel_rng: don't want to disable this in firmware setup, and if [ 62.154976] intel_rng: you are certain that your system has a functional [ 62.154976] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 62.672323] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 62.689788] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \TRIO 1 (20131115/utaddress-251) [ 62.689797] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251) [ 62.689803] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251) [ 62.689808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 62.689813] ACPI Warning: 0x00001300-0x0000132f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 62.689818] ACPI Warning: 0x00001300-0x0000132f SystemIO conflicts with Region \GPO1 2 (20131115/utaddress-251) [ 62.689823] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 62.689894] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 63.175873] NET: Registered protocol family 23 [ 64.222421] nsc-ircc, chip->init [ 64.222435] nsc-ircc, Found chip at base=0x02e [ 64.222459] nsc-ircc, driver loaded (Dag Brattli) [ 64.222475] nsc_ircc_open(), can't get iobase of 0x2f8 [ 64.222504] nsc-ircc, Found chip at base=0x02e [ 64.222528] nsc-ircc, driver loaded (Dag Brattli) [ 64.222538] nsc_ircc_open(), can't get iobase of 0x2f8 [ 64.222550] nsc-ircc, chip->init [ 64.222558] nsc-ircc, Found chip at base=0x02e [ 64.222582] nsc-ircc, driver loaded (Dag Brattli) [ 64.222756] nsc-ircc 00:0a: disabled [ 65.353357] yenta_cardbus 0000:02:09.0: CardBus bridge found [1558:0470] [ 65.353379] yenta_cardbus 0000:02:09.0: Using INTVAL to route CSC interrupts to PCI [ 65.353382] yenta_cardbus 0000:02:09.0: Routing CardBus interrupts to PCI [ 65.353388] yenta_cardbus 0000:02:09.0: TI: mfunc 0x01001c00, devctl 0x66 [ 65.672665] yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x00f0, PCI irq 10 [ 65.672674] yenta_cardbus 0000:02:09.0: Socket status: 30000086 [ 65.672679] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 65.672692] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [io 0xa000-0xbfff] [ 65.672697] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: [ 65.674032] excluding 0xa000-0xa03f 0xa200-0xa2ff 0xa400-0xa4ff 0xa800-0xa8ff 0xac00-0xacff 0xb000-0xb0ff [ 65.699935] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xdfffffff] [ 65.699941] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xdfffffff: [ 65.699945] excluding 0xd0000000-0xd07fffff 0xd4000000-0xd47fffff 0xd8000000-0xdc7fffff [ 65.699975] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8fffffff pref] [ 65.699979] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x8fffffff: [ 65.702665] excluding 0x80000000-0x8fffffff [ 65.718297] yenta_cardbus 0000:02:09.1: CardBus bridge found [1558:0470] [ 65.718319] yenta_cardbus 0000:02:09.1: Using INTVAL to route CSC interrupts to PCI [ 65.718323] yenta_cardbus 0000:02:09.1: Routing CardBus interrupts to PCI [ 65.718329] yenta_cardbus 0000:02:09.1: TI: mfunc 0x01001c00, devctl 0x66 [ 65.725218] cfg80211: Calling CRDA to update world regulatory domain [ 65.974155] yenta_cardbus 0000:02:09.1: ISA IRQ mask 0x00f0, PCI irq 11 [ 65.974164] yenta_cardbus 0000:02:09.1: Socket status: 30000006 [ 65.974169] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 65.974181] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [io 0xa000-0xbfff] [ 65.974186] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xbfff: [ 65.975520] excluding 0xa000-0xa03f 0xa200-0xa2ff 0xa400-0xa4ff 0xa800-0xa8ff 0xac00-0xacff 0xb000-0xb0ff [ 65.990611] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xdfffffff] [ 65.990618] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0000000-0xdfffffff: [ 65.990623] excluding 0xd0000000-0xd07fffff 0xd4000000-0xd47fffff 0xd8000000-0xdc7fffff [ 65.990652] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8fffffff pref] [ 65.990656] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x8fffffff: [ 65.990685] excluding 0x80000000-0x8fffffff [ 66.005788] lib80211: common routines for IEEE802.11 drivers [ 66.005793] lib80211_crypt: registered algorithm 'NULL' [ 66.747899] Bluetooth: Core ver 2.17 [ 66.748052] NET: Registered protocol family 31 [ 66.748056] Bluetooth: HCI device and connection manager initialized [ 66.748272] Bluetooth: HCI socket layer initialized [ 66.748277] Bluetooth: L2CAP socket layer initialized [ 66.748284] Bluetooth: SCO socket layer initialized [ 66.778276] libipw: 802.11 data/management/control stack, git-1.1.13 [ 66.778282] libipw: Copyright (C) 2004-2005 Intel Corporation [ 67.120666] Bluetooth: RFCOMM TTY layer initialized [ 67.120686] Bluetooth: RFCOMM socket layer initialized [ 67.120696] Bluetooth: RFCOMM ver 1.11 [ 67.193252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 67.193258] Bluetooth: BNEP filters: protocol multicast [ 67.193270] Bluetooth: BNEP socket layer initialized [ 67.378687] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 67.378694] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 67.378940] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 69.361111] ata1: drained 65536 bytes to clear DRQ [ 69.438902] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 69.438907] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 69.438912] ata1.00: failed command: READ MULTIPLE [ 69.438921] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 69.438921] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 69.438926] ata1.00: status: { DRDY DRQ ERR } [ 69.438928] ata1.00: error: { UNC } [ 69.438957] ata1: soft resetting link [ 69.608548] ata1.00: configured for PIO0 [ 69.608562] ata1: EH complete [ 71.045189] ata1: drained 65536 bytes to clear DRQ [ 71.122944] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 71.122947] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 71.122951] ata1.00: failed command: READ MULTIPLE [ 71.122959] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 71.122959] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 71.122963] ata1.00: status: { DRDY DRQ ERR } [ 71.122966] ata1.00: error: { UNC } [ 71.122988] ata1: soft resetting link [ 71.292539] ata1.00: configured for PIO0 [ 71.292547] ata1: EH complete [ 72.740346] ata1: drained 65536 bytes to clear DRQ [ 72.818096] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 72.818099] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 72.818103] ata1.00: failed command: READ MULTIPLE [ 72.818110] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 72.818110] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 72.818115] ata1.00: status: { DRDY DRQ ERR } [ 72.818117] ata1.00: error: { UNC } [ 72.818140] ata1: soft resetting link [ 72.988436] ata1.00: configured for PIO0 [ 72.988443] ata1: EH complete [ 74.435504] ata1: drained 65536 bytes to clear DRQ [ 74.513253] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 74.513256] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 74.513260] ata1.00: failed command: READ MULTIPLE [ 74.513268] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 74.513268] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 74.513272] ata1.00: status: { DRDY DRQ ERR } [ 74.513275] ata1.00: error: { UNC } [ 74.513297] ata1: soft resetting link [ 74.684545] ata1.00: configured for PIO0 [ 74.684553] ata1: EH complete [ 76.130657] ata1: drained 65536 bytes to clear DRQ [ 76.208408] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 76.208411] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 76.208415] ata1.00: failed command: READ MULTIPLE [ 76.208422] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 76.208422] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 76.208426] ata1.00: status: { DRDY DRQ ERR } [ 76.208429] ata1.00: error: { UNC } [ 76.208452] ata1: soft resetting link [ 76.380538] ata1.00: configured for PIO0 [ 76.380545] ata1: EH complete [ 77.825811] ata1: drained 65536 bytes to clear DRQ [ 77.903560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 77.903564] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 77.903567] ata1.00: failed command: READ MULTIPLE [ 77.903575] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 77.903575] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 77.903579] ata1.00: status: { DRDY DRQ ERR } [ 77.903582] ata1.00: error: { UNC } [ 77.903605] ata1: soft resetting link [ 78.072538] ata1.00: configured for PIO0 [ 78.072551] sd 0:0:0:0: [sda] Unhandled sense code [ 78.072555] sd 0:0:0:0: [sda] [ 78.072558] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 78.072561] sd 0:0:0:0: [sda] [ 78.072563] Sense Key : Medium Error [current] [descriptor] [ 78.072568] Descriptor sense data with sense descriptors (in hex): [ 78.072570] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 78.072581] 09 51 f9 00 [ 78.072587] sd 0:0:0:0: [sda] [ 78.072592] Add. Sense: Unrecovered read error - auto reallocate failed [ 78.072595] sd 0:0:0:0: [sda] CDB: [ 78.072597] Read(10): 28 00 09 51 f9 00 00 00 08 00 [ 78.072608] end_request: I/O error, dev sda, sector 156367104 [ 78.072613] Buffer I/O error on device sda, logical block 19545888 [ 78.072624] ata1: EH complete [ 79.831191] ata1: drained 65536 bytes to clear DRQ [ 79.908966] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 79.908970] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 79.908975] ata1.00: failed command: READ MULTIPLE [ 79.908984] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 79.908984] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 79.908988] ata1.00: status: { DRDY DRQ ERR } [ 79.908991] ata1.00: error: { UNC } [ 79.909021] ata1: soft resetting link [ 80.080548] ata1.00: configured for PIO0 [ 80.080561] ata1: EH complete [ 81.526231] ata1: drained 65536 bytes to clear DRQ [ 81.604209] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 81.604212] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 81.604216] ata1.00: failed command: READ MULTIPLE [ 81.604223] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 81.604223] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 81.604228] ata1.00: status: { DRDY DRQ ERR } [ 81.604230] ata1.00: error: { UNC } [ 81.604253] ata1: soft resetting link [ 81.776546] ata1.00: configured for PIO0 [ 81.776554] ata1: EH complete [ 83.232578] ata1: drained 65536 bytes to clear DRQ [ 83.310337] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 83.310340] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 83.310344] ata1.00: failed command: READ MULTIPLE [ 83.310351] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 83.310351] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 83.310356] ata1.00: status: { DRDY DRQ ERR } [ 83.310358] ata1.00: error: { UNC } [ 83.310381] ata1: soft resetting link [ 83.480538] ata1.00: configured for PIO0 [ 83.480546] ata1: EH complete [ 84.927731] ata1: drained 65536 bytes to clear DRQ [ 85.005483] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 85.005486] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 85.005490] ata1.00: failed command: READ MULTIPLE [ 85.005498] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 85.005498] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 85.005502] ata1.00: status: { DRDY DRQ ERR } [ 85.005505] ata1.00: error: { UNC } [ 85.005527] ata1: soft resetting link [ 85.176440] ata1.00: configured for PIO0 [ 85.176448] ata1: EH complete [ 86.622885] ata1: drained 65536 bytes to clear DRQ [ 86.700651] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 86.700654] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 86.700658] ata1.00: failed command: READ MULTIPLE [ 86.700666] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 86.700666] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 86.700670] ata1.00: status: { DRDY DRQ ERR } [ 86.700673] ata1.00: error: { UNC } [ 86.700695] ata1: soft resetting link [ 86.872539] ata1.00: configured for PIO0 [ 86.872546] ata1: EH complete [ 88.329118] ata1: drained 65536 bytes to clear DRQ [ 88.406868] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 88.406872] ata1.00: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 88.406875] ata1.00: failed command: READ MULTIPLE [ 88.406883] ata1.00: cmd c4/00:08:00:f9:51/00:00:00:00:00/e9 tag 0 pio 4096 in [ 88.406883] res 59/40:08:00:f9:51/00:00:00:00:00/e9 Emask 0x3 (HSM violation) [ 88.406887] ata1.00: status: { DRDY DRQ ERR } [ 88.406890] ata1.00: error: { UNC } [ 88.406912] ata1: soft resetting link [ 88.576546] ata1.00: configured for PIO0 [ 88.576558] sd 0:0:0:0: [sda] Unhandled sense code [ 88.576562] sd 0:0:0:0: [sda] [ 88.576565] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 88.576568] sd 0:0:0:0: [sda] [ 88.576570] Sense Key : Medium Error [current] [descriptor] [ 88.576575] Descriptor sense data with sense descriptors (in hex): [ 88.576577] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 88.576588] 09 51 f9 00 [ 88.576594] sd 0:0:0:0: [sda] [ 88.576599] Add. Sense: Unrecovered read error - auto reallocate failed [ 88.576602] sd 0:0:0:0: [sda] CDB: [ 88.576605] Read(10): 28 00 09 51 f9 00 00 00 08 00 [ 88.576616] end_request: I/O error, dev sda, sector 156367104 [ 88.576620] Buffer I/O error on device sda, logical block 19545888 [ 88.576633] ata1: EH complete [ 89.345635] init: avahi-cups-reload main process (483) terminated with status 1 [ 89.643659] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 89.811392] intel8x0_measure_ac97_clock: measured 94691 usecs (4555 samples) [ 89.811399] intel8x0: clocking to 48000 [ 91.178016] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: [ 91.178938] excluding 0x120-0x12f 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 [ 91.179792] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: [ 91.180417] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: [ 91.181332] excluding 0x120-0x12f 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 [ 91.182183] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: [ 91.182568] excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 91.182929] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: [ 91.183539] clean. [ 91.183559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: [ 91.184531] excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 91.184898] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: [ 91.185508] clean. [ 91.185529] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: [ 91.186204] clean. [ 91.186229] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: [ 91.186235] excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 91.186267] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: [ 91.186283] excluding 0xa0000000-0xa0ffffff [ 91.186304] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: [ 91.186322] clean. [ 91.186342] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: [ 91.187038] clean. [ 91.187300] clean. [ 91.187325] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 91.187332] excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 91.187363] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 91.187378] excluding 0xa0000000-0xa0ffffff [ 91.187400] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 91.187417] clean. [ 91.187437] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 91.188816] clean. [ 91.800843] type=1400 audit(1410688790.824:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser" [ 91.800860] type=1400 audit(1410688790.824:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser" [ 91.800868] type=1400 audit(1410688790.824:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser" [ 91.801704] type=1400 audit(1410688790.824:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser" [ 91.801714] type=1400 audit(1410688790.824:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser" [ 91.802150] type=1400 audit(1410688790.824:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser" [ 91.803353] type=1400 audit(1410688790.824:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=491 comm="apparmor_parser" [ 91.803363] type=1400 audit(1410688790.824:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=491 comm="apparmor_parser" [ 95.776248] cfg80211: World regulatory domain updated: [ 95.776256] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 95.776259] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 95.776262] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 95.776265] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 95.776268] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 95.776270] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 96.302252] init: failsafe main process (574) killed by TERM signal [ 114.151761] audit_printk_skb: 39 callbacks suppressed [ 114.151769] type=1400 audit(1410688813.176:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=854 comm="apparmor_parser" [ 114.151780] type=1400 audit(1410688813.176:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=854 comm="apparmor_parser" [ 114.152316] type=1400 audit(1410688813.176:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=854 comm="apparmor_parser" [ 114.161325] type=1400 audit(1410688813.184:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=858 comm="apparmor_parser" [ 114.161343] type=1400 audit(1410688813.184:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser" [ 114.161352] type=1400 audit(1410688813.184:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser" [ 114.162182] type=1400 audit(1410688813.184:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser" [ 114.162191] type=1400 audit(1410688813.184:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser" [ 114.162620] type=1400 audit(1410688813.184:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser" [ 116.853865] r8169 0000:02:00.0 eth0: link down [ 116.853880] r8169 0000:02:00.0 eth0: link down [ 116.853952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 116.854502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 117.981988] type=1400 audit(1410688817.004:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=860 comm="apparmor_parser" [ 119.771827] audit_printk_skb: 72 callbacks suppressed [ 119.771834] type=1400 audit(1410688818.792:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=879 comm="apparmor_parser" [ 121.846640] bio: create slab at 1 [ 124.496729] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 125.645604] type=1400 audit(1410688824.667:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1018 comm="apparmor_parser"