Marvell 88E8055 PCI-E GbE not functional in 14.04 x86_64
Bug #1354689 reported by
Yuan Chao
This bug affects 1 person
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Confirmed
|
Medium
|
Unassigned |
Bug Description
Since 12.04 32bit, the driver (sky2) for Marvell 88E8055 PCI-E GbE isn't functioning well as HWaddr 00:00:00:00:00:00. With a manual setting using 'ifconfig eth0 hw ether 00:01:xx:xx:xx:xx' or 'ip link set eth0 addr 00:01:xx:xx:xx:xx' (numbers hidden) the device can be working. When I move to 14.04 64bit, this old trick doesn't work. Although one can still set the hw address and the LED blinks, no packet is transferred as seen with ifconfig. Now I run with 14.04 32bit live iso, the old trick works.
affects: | ubuntu → linux-meta (Ubuntu) |
affects: | linux-meta (Ubuntu) → linux (Ubuntu) |
Changed in linux (Ubuntu): | |
importance: | Undecided → Medium |
To post a comment you must log in.
Some how apport doesn't work here. (due to live env.?) Here is the lspci output and kernel log:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
Subsystem: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at fdcfc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at ee00 [size=256]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sky2
Aug 9 20:16:35 ubuntu kernel: [ 5.103342] sky2: driver version 1.30 NETDEV_ UP): eth0: link is not ready NETDEV_ UP): eth0: link is not ready NETDEV_ CHANGE) : eth0: link becomes ready
Aug 9 20:16:35 ubuntu kernel: [ 5.103509] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
Aug 9 20:16:35 ubuntu kernel: [ 5.103604] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
Aug 9 20:16:35 ubuntu kernel: [ 5.103855] sky2 0000:02:00.0 eth0: addr 00:00:00:00:00:00
... (manually assign hw addr)
Aug 9 20:20:21 ubuntu kernel: [ 243.665078] sky2 0000:02:00.0 eth0: enabling interface
Aug 9 20:20:21 ubuntu kernel: [ 243.665211] IPv6: ADDRCONF(
Aug 9 20:20:21 ubuntu kernel: [ 243.666488] sky2 0000:02:00.0 eth0: disabling interface
Aug 9 20:20:21 ubuntu kernel: [ 243.671938] sky2 0000:02:00.0 eth0: enabling interface
Aug 9 20:20:21 ubuntu kernel: [ 243.672161] IPv6: ADDRCONF(
Aug 9 20:20:24 ubuntu kernel: [ 246.914983] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
Aug 9 20:20:24 ubuntu kernel: [ 246.915209] IPv6: ADDRCONF(