Results generated by fwts: Version V14.05.00 (2014-05-07 01:57:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 27/06/14 at 04:28:26 on host Linux 201302-12682 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64. Command: "fwts -P --s3-multiple=5 --s3-device-check --s3-device-check-delay 45 --s3-sleep-delay 30 s3 s3". Running tests: s3 s3. s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 37 seconds. Network Controller configurations differ, before: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 04 10 00 0c 00 00 02 10 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 00 10 00 00 00 80 02 10 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... versus after: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 05 10 00 0c 00 00 02 08 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 01 10 00 00 00 80 02 08 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 93.043423] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 93.043426] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 93.043429] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.376 seconds. Resume: 6.846 seconds. S3 cycle 2 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 147.131233] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 147.131238] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 147.131242] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.037 seconds. Resume: 6.862 seconds. S3 cycle 3 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 201.167931] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 201.167935] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 201.167939] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.981 seconds. Resume: 6.834 seconds. S3 cycle 4 of 5 pm-suspend returned 0 after 37 seconds. Input Devices configurations differ, before: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: event3 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: event4 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: event5 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: event6 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input11 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input4 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: input5 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: input6 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: input8 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input9 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: mouse0 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 versus after: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: event3 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: event4 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: event6 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input11 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input4 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: input5 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: input6 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: input9 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: mouse0 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 255.212939] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 255.212942] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 255.212945] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.022 seconds. Resume: 6.855 seconds. S3 cycle 5 of 5 pm-suspend returned 128 after 20 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 20 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. Completed 5 S3 cycle(s) Found 12 errors in kernel log. Found 2 PM related suspend issues. Found 2 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 16 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 4 passed, 16 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 38 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 384.354327] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 384.354331] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 384.354336] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 8.729 seconds. Resume: 6.882 seconds. S3 cycle 2 of 5 pm-suspend returned 128 after 20 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 20 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. S3 cycle 3 of 5 pm-suspend returned 128 after 21 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 21 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. S3 cycle 4 of 5 pm-suspend returned 128 after 21 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 21 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. S3 cycle 5 of 5 pm-suspend returned 0 after 37 seconds. Input Devices configurations differ, before: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: event3 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: event4 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: event6 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input11 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input4 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: input5 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: input6 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: input9 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: mouse0 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 versus after: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: event3 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: event4 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: event5 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: event6 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input11 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input30 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input4 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input0 Device: input5 Device Name: Lite-On Technology Corp. Lenovo USB Keyboard Phy: usb-0000:00:14.0-1/input1 Device: input6 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 Device: input9 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: mouse0 Device Name: Lenovo Optical USB Mouse Phy: usb-0000:00:1a.0-1.1/input0 FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 637.441544] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 637.441548] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 637.441553] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 4.136 seconds. Resume: 6.823 seconds. Completed 5 S3 cycle(s) Found 6 errors in kernel log. Found 6 PM related suspend issues. Found 1 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 13 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 4 passed, 13 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 8 passed, 29 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: 20 s3: Found 1 differences in device configuation during S3 cycle. s3: HIGH Kernel message: [ 93.043423] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 93.043426] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 93.043429] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 147.131233] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 147.131238] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 147.131242] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 201.167931] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 201.167935] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 201.167939] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 255.212939] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 255.212942] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 255.212945] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: pm-action tried to put the machine in the requested power state but failed. s3: HIGH Kernel message: [ 384.354327] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 384.354331] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 384.354336] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 637.441544] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 637.441548] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880078312fc8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 637.441553] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880078313258), AE_AML_BUFFER_LIMIT (20131115/psparse-536) Medium failures: 2 s3: Unexpected: S3 slept for 20 seconds, less than the expected 30 seconds. s3: Unexpected: S3 slept for 21 seconds, less than the expected 30 seconds. Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ s3 | 4| 13| | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 8| 29| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Results generated by fwts: Version V14.05.00 (2014-05-07 01:57:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 04/07/14 at 02:55:19 on host Linux 201302-12682 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64. Command: "fwts -P --s3-multiple=5 --s3-device-check --s3-device-check-delay 45 s3". Running tests: s3. s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 37 seconds. Network Controller configurations differ, before: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 04 10 00 0c 00 00 02 10 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 00 10 00 00 00 80 02 10 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... versus after: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 05 10 00 0c 00 00 02 08 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 01 10 00 00 00 80 02 08 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 349.241368] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 349.241372] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 349.241377] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.269 seconds. Resume: 6.931 seconds. S3 cycle 2 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 403.512383] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 403.512388] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 403.512392] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.073 seconds. Resume: 6.936 seconds. S3 cycle 3 of 5 pm-suspend returned 0 after 37 seconds. Input Devices configurations differ, before: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event3 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input0 Device: event4 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input1 Device: event5 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: event6 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event7 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input5 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: input6 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input0 Device: input7 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input1 Device: input8 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input9 Device Name: HDA Intel PCH Mic Phy: ALSA versus after: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event3 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input0 Device: event4 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input1 Device: event6 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event7 Device Name: HDA Intel PCH Mic Phy: ALSA Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input5 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: input6 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input0 Device: input7 Device Name: USB Keyboard Phy: usb-0000:00:14.0-1.4/input1 Device: input9 Device Name: HDA Intel PCH Mic Phy: ALSA FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 457.594493] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 457.594498] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 457.594502] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.927 seconds. Resume: 6.930 seconds. S3 cycle 4 of 5 pm-suspend returned 128 after 20 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 20 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. S3 cycle 5 of 5 pm-suspend returned 128 after 21 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 21 seconds, less than the expected 30 seconds. FAILED [HIGH] PMActionPowerStateS3: Test 1, pm-action tried to put the machine in the requested power state but failed. Suspend/Resume Timings: Could not determine time to suspend. Could not determine time to resume. Completed 5 S3 cycle(s) Found 9 errors in kernel log. Found 4 PM related suspend issues. Found 2 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 15 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 4 passed, 15 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 4 passed, 15 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: 11 s3: Found 1 differences in device configuation during S3 cycle. s3: HIGH Kernel message: [ 349.241368] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 349.241372] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 349.241377] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 403.512383] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 403.512388] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 403.512392] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 457.594493] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 457.594498] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 457.594502] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: pm-action tried to put the machine in the requested power state but failed. Medium failures: 2 s3: Unexpected: S3 slept for 20 seconds, less than the expected 30 seconds. s3: Unexpected: S3 slept for 21 seconds, less than the expected 30 seconds. Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ s3 | 4| 15| | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 4| 15| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Results generated by fwts: Version V14.05.00 (2014-05-07 01:57:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 04/07/14 at 03:11:57 on host Linux 201302-12682 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64. Command: "fwts -P --s3-multiple=5 --s3-device-check --s3-device-check-delay 45 s3". Running tests: s3. s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 37 seconds. Network Controller configurations differ, before: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 04 10 00 0c 00 00 02 10 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 00 10 00 00 00 80 02 10 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... versus after: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 05 10 00 0c 00 00 02 08 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 01 10 00 00 00 80 02 08 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 200.693231] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 200.693234] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 200.693237] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.212 seconds. Resume: 6.949 seconds. S3 cycle 2 of 5 pm-suspend returned 0 after 13 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 13 seconds, less than the expected 30 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 254.745252] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 254.745256] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 254.745260] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.924 seconds. Resume: 7.462 seconds. S3 cycle 3 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 309.414482] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 309.414487] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 309.414491] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.025 seconds. Resume: 6.980 seconds. S3 cycle 4 of 5 pm-suspend returned 0 after 14 seconds. FAILED [MEDIUM] ShortSuspend: Test 1, Unexpected: S3 slept for 14 seconds, less than the expected 30 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 363.570682] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 363.570686] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 363.570691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.009 seconds. Resume: 6.968 seconds. S3 cycle 5 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 417.715610] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 417.715614] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 417.715618] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.001 seconds. Resume: 6.939 seconds. Completed 5 S3 cycle(s) Found 15 errors in kernel log. Found 2 PM related suspend issues. Found 1 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 18 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 4 passed, 18 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 4 passed, 18 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: 16 s3: Found 1 differences in device configuation during S3 cycle. s3: HIGH Kernel message: [ 200.693231] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 200.693234] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 200.693237] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 254.745252] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 254.745256] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 254.745260] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 309.414482] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 309.414487] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 309.414491] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 363.570682] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 363.570686] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 363.570691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 417.715610] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 417.715614] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 417.715618] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) Medium failures: 2 s3: Unexpected: S3 slept for 13 seconds, less than the expected 30 seconds. s3: Unexpected: S3 slept for 14 seconds, less than the expected 30 seconds. Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ s3 | 4| 18| | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 4| 18| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Results generated by fwts: Version V14.05.00 (2014-05-07 01:57:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 04/07/14 at 03:20:40 on host Linux 201302-12682 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64. Command: "fwts -P --s3-multiple=5 --s3-device-check --s3-device-check-delay 45 s3". Running tests: s3. s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 36 seconds. Network Controller configurations differ, before: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 04 10 00 0c 00 00 02 10 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 00 10 00 00 00 80 02 10 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... versus after: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 05 10 00 0c 00 00 02 08 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 01 10 00 00 00 80 02 08 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 78.755818] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 78.755822] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 78.755827] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.483 seconds. Resume: 6.971 seconds. S3 cycle 2 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 132.932557] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 132.932561] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 132.932565] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.922 seconds. Resume: 6.934 seconds. S3 cycle 3 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 186.812460] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 186.812464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 186.812469] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.813 seconds. Resume: 6.978 seconds. S3 cycle 4 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 240.881154] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 240.881158] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 240.881163] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.958 seconds. Resume: 6.920 seconds. S3 cycle 5 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 294.885074] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 294.885078] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 294.885083] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.951 seconds. Resume: 6.973 seconds. Completed 5 S3 cycle(s) Found 15 errors in kernel log. PASSED: Test 1, No PM related suspend issues detected. Found 1 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 16 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 5 passed, 16 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 5 passed, 16 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: 16 s3: Found 1 differences in device configuation during S3 cycle. s3: HIGH Kernel message: [ 78.755818] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 78.755822] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 78.755827] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 132.932557] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 132.932561] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 132.932565] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 186.812460] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 186.812464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 186.812469] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 240.881154] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 240.881158] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 240.881163] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 294.885074] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) s3: HIGH Kernel message: [ 294.885078] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) s3: HIGH Kernel message: [ 294.885083] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ s3 | 5| 16| | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 5| 16| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Results generated by fwts: Version V14.05.00 (2014-05-07 01:57:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 04/07/14 at 03:55:49 on host Linux 201302-12682 3.16.0-031600rc3-generic #201406291835 SMP Sun Jun 29 22:36:41 UTC 2014 x86_64. Command: "fwts -P --s3-multiple=5 --s3-device-check --s3-device-check-delay 45 s3". Running tests: s3. s3: S3 suspend/resume test. -------------------------------------------------------------------------------- Test 1 of 1: S3 suspend/resume test. S3 cycle 1 of 5 pm-suspend returned 0 after 38 seconds. Network Controller configurations differ, before: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 04 10 00 0c 00 00 02 10 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 00 10 00 00 00 80 02 10 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... versus after: PCI: 0000:02:00.0, VID: ec:68, Class: 02:00 (Ethernet controller) Config: 0000: ec 10 68 81 07 05 10 00 0c 00 00 02 08 00 00 00 ..h............. 0010: 01 e0 00 00 00 00 00 00 04 00 d0 f7 00 00 00 00 ................ 0020: 0c 00 00 f0 00 00 00 00 00 00 00 00 28 10 c2 05 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 ....@........... PCI: 0000:03:00.0, VID: e4:59, Class: 02:80 (Network controller) Config: 0000: e4 14 59 43 06 01 10 00 00 00 80 02 08 00 00 00 ..YC............ 0010: 04 00 c0 f7 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 14 00 ............(... 0030: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 ....@........... FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 91.456556] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 91.456560] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 91.456565] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 2.149 seconds. Resume: 0.667 seconds. S3 cycle 2 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 144.744267] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 144.744270] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 144.744273] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.170 seconds. Resume: 0.679 seconds. S3 cycle 3 of 5 pm-suspend returned 0 after 37 seconds. Input Devices configurations differ, before: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event2 Device Name: Logitech USB Optical Mouse Phy: usb-0000:00:14.0-1/input0 Device: event3 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input0 Device: event4 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input1 Device: event5 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event6 Device Name: HDA Intel PCH Mic Phy: ALSA Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input11 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input4 Device Name: Logitech USB Optical Mouse Phy: usb-0000:00:14.0-1/input0 Device: input5 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input0 Device: input6 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input1 Device: input8 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: input9 Device Name: HDA Intel PCH Mic Phy: ALSA Device: mouse0 Device Name: Logitech USB Optical Mouse Phy: usb-0000:00:14.0-1/input0 versus after: Device: event0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: event1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: event3 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input0 Device: event4 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input1 Device: event5 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: event6 Device Name: HDA Intel PCH Mic Phy: ALSA Device: event7 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: event8 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input0 Device Name: Power Button Phy: PNP0C0C/button/input0 Device: input1 Device Name: Power Button Phy: LNXPWRBN/button/input0 Device: input10 Device Name: HDA Intel PCH Front Headphone Phy: ALSA Device: input11 Device Name: Laptop_Integrated_Webcam_HD Phy: usb-0000:00:14.0-4/button Device: input5 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input0 Device: input6 Device Name: USB Keyboard Phy: usb-0000:00:1a.0-1.1.4/input1 Device: input8 Device Name: Dell AIO WMI hotkeys Phy: wmi/input0 Device: input9 Device Name: HDA Intel PCH Mic Phy: ALSA FAILED [HIGH] DevConfigDiffAfterS3: Test 1, Found 1 differences in device configuation during S3 cycle. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 198.084582] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 198.084586] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 198.084590] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.161 seconds. Resume: 0.663 seconds. S3 cycle 4 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 251.353204] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 251.353207] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 251.353210] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.126 seconds. Resume: 0.639 seconds. S3 cycle 5 of 5 pm-suspend returned 0 after 37 seconds. FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH Kernel message: [ 304.548486] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) ADVICE: Failed to initialise an ACPI buffer field, the field exceeded the buffer size provided. This is a firmware bug. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 304.548490] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Generally this error occurs because of access outside of a buffer. This occurs for several reasons: a) A field does not fit within the current length of a buffer, b) an ACPI table load did not fit into a buffer, c) An attempt to convert a buffer into an integer failed because the buffer was zero sized, d) a SMBus/IPMI/GenericSerialBus write failed because the buffer was too small, e) An index into a buffer was too long and fell outside the buffer. FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel message: [ 304.548494] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) ADVICE: Method failed: ResourceSourceIndex is present but ResourceSource is not. This is a common issue from a particular BIOS vendor, the _SRS (Set Resource Settings) optional control takes a byte stream argument that specifies a new resource allocation for a device. The resource descriptors in the byte stream argument must be specified exactly as listed by _CRS. However, in this case _SRS has been passed a byte stream that is too short and attempted to access bytes outside the buffer causing this error. This is a firmware bug that needs to be fixed. Suspend/Resume Timings: Suspend: 1.128 seconds. Resume: 0.611 seconds. Completed 5 S3 cycle(s) Found 15 errors in kernel log. PASSED: Test 1, No PM related suspend issues detected. Found 2 device errors. PASSED: Test 1, No kernel oopses detected. PASSED: Test 1, No kernel WARN_ON warnings detected. Found 17 errors and 0 oopses doing 5 suspend/resume cycle(s). PASSED: Test 1, All suspends took less than 15.00 seconds. PASSED: Test 1, All resumes took less than 15.00 seconds. ================================================================================ 5 passed, 17 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 5 passed, 17 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: 16 s3: Found 1 differences in device configuation during S3 cycle. s3: HIGH Kernel message: [ 91.456556] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) s3: HIGH Kernel message: [ 91.456560] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 91.456565] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 144.744267] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) s3: HIGH Kernel message: [ 144.744270] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 144.744273] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 198.084582] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) s3: HIGH Kernel message: [ 198.084586] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 198.084590] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 251.353204] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) s3: HIGH Kernel message: [ 251.353207] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 251.353210] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 304.548486] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236) s3: HIGH Kernel message: [ 304.548490] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880100007c58), AE_AML_BUFFER_LIMIT (20140424/psparse-536) s3: HIGH Kernel message: [ 304.548494] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880100007ed8), AE_AML_BUFFER_LIMIT (20140424/psparse-536) Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ s3 | 5| 17| | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 5| 17| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+