[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=d6534767-b55e-4ec0-b18e-cb1151963470 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000075ee8fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000075ee9000-0x0000000075ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x0000000076752fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076753000-0x00000000767fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000076800000-0x0000000076fb1fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076fb2000-0x0000000076ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000077000000-0x000000007871efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007871f000-0x00000000787fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078800000-0x0000000079f75fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079f76000-0x000000007a757fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a758000-0x000000007a79afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a79b000-0x000000007abe0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007abe1000-0x000000007afecfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007afed000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000007d9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 3011 AIO/ , BIOS A04 12/08/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FFFC00000 write-back [ 0.000000] 2 base 100400000 mask FFFE00000 write-back [ 0.000000] 3 base 080000000 mask F80000000 uncachable [ 0.000000] 4 base 07C000000 mask FFC000000 uncachable [ 0.000000] 5 base 07B800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 4MB, type WB [ 0.000000] reg 2, base: 4100MB, range: 2MB, type WB [ 0.000000] reg 3, base: 2GB, range: 2GB, type UC [ 0.000000] reg 4, base: 1984MB, range: 64MB, type UC [ 0.000000] reg 5, base: 1976MB, range: 8MB, type UC [ 0.000000] total RAM covered: 1982M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1976MB, range: 8MB, type UC [ 0.000000] reg 2, base: 1984MB, range: 64MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4MB, type WB [ 0.000000] reg 4, base: 4100MB, range: 2MB, type WB [ 0.000000] e820: update [mem 0x7b800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd990-0x000fd99f] mapped at [ffff8800000fd990] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff] [ 0.000000] [mem 0x100400000-0x1005fffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff] [ 0.000000] [mem 0x100000000-0x1003fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0x75ee8fff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0x75dfffff] page 2M [ 0.000000] [mem 0x75e00000-0x75ee8fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x76000000-0x76752fff] [ 0.000000] [mem 0x76000000-0x765fffff] page 2M [ 0.000000] [mem 0x76600000-0x76752fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x76800000-0x76fb1fff] [ 0.000000] [mem 0x76800000-0x76dfffff] page 2M [ 0.000000] [mem 0x76e00000-0x76fb1fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x77000000-0x7871efff] [ 0.000000] [mem 0x77000000-0x785fffff] page 2M [ 0.000000] [mem 0x78600000-0x7871efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x78800000-0x79f75fff] [ 0.000000] [mem 0x78800000-0x79dfffff] page 2M [ 0.000000] [mem 0x79e00000-0x79f75fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7a79b000-0x7abe0fff] [ 0.000000] [mem 0x7a79b000-0x7a7fffff] page 4k [ 0.000000] [mem 0x7a800000-0x7a9fffff] page 2M [ 0.000000] [mem 0x7aa00000-0x7abe0fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7afed000-0x7affffff] [ 0.000000] [mem 0x7afed000-0x7affffff] page 4k [ 0.000000] RAMDISK: [mem 0x35b9e000-0x36dc6fff] [ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0000000076ff3078 000074 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0000000076ffd7a0 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0000000076ff3180 00A61A (v02 DELL CBX3 00000021 INTL 20091112) [ 0.000000] ACPI: FACS 00000000787fe080 000040 [ 0.000000] ACPI: APIC 0000000076ffd8b0 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0000000076ffd928 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0000000076ffd970 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0000000076ffd9b0 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0000000076ffd9e8 000415 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0000000076ffde00 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0000000076ffe7c0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: ASF! 0000000076fff258 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SLIC 0000000076fff300 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff] [ 0.000000] NODE_DATA [mem 0x1005f3000-0x1005f7fff] [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073c00000-ffff880075dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x1005fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0x75ee8fff] [ 0.000000] node 0: [mem 0x76000000-0x76752fff] [ 0.000000] node 0: [mem 0x76800000-0x76fb1fff] [ 0.000000] node 0: [mem 0x77000000-0x7871efff] [ 0.000000] node 0: [mem 0x78800000-0x79f75fff] [ 0.000000] node 0: [mem 0x7a79b000-0x7abe0fff] [ 0.000000] node 0: [mem 0x7afed000-0x7affffff] [ 0.000000] node 0: [mem 0x100000000-0x1005fffff] [ 0.000000] On node 0 totalpages: 500855 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7740 pages used for memmap [ 0.000000] DMA32 zone: 495323 pages, LIFO batch:31 [ 0.000000] Normal zone: 24 pages used for memmap [ 0.000000] Normal zone: 1536 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0x75ee9000-0x75ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76753000-0x767fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76fb2000-0x76ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7871f000-0x787fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79f76000-0x7a757fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a758000-0x7a79afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7abe1000-0x7afecfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7b7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b800000-0x7d9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7da00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x7da00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880100200000 s86336 r8192 d24256 u524288 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 493006 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=d6534767-b55e-4ec0-b18e-cb1151963470 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1866832K/2003420K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 136588K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8912896 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3292.669 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.33 BogoMIPS (lpj=13170676) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000019] Security Framework initialized [ 0.000033] AppArmor: AppArmor initialized [ 0.000034] Yama: becoming mindful. [ 0.000175] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000662] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000890] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000894] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001056] Initializing cgroup subsys memory [ 0.001061] Initializing cgroup subsys devices [ 0.001063] Initializing cgroup subsys freezer [ 0.001064] Initializing cgroup subsys blkio [ 0.001065] Initializing cgroup subsys perf_event [ 0.001066] Initializing cgroup subsys hugetlb [ 0.001084] CPU: Physical Processor ID: 0 [ 0.001085] CPU: Processor Core ID: 0 [ 0.001088] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001088] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.001091] mce: CPU supports 7 MCE banks [ 0.001100] CPU0: Thermal monitoring enabled (TM1) [ 0.001107] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.001107] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.001107] tlb_flushall_shift: 2 [ 0.001201] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000) [ 0.002076] ACPI: Core revision 20131115 [ 0.005741] ACPI: All ACPI Tables successfully acquired [ 0.005877] ftrace: allocating 28408 entries in 111 pages [ 0.016496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056181] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.056188] TSC deadline timer enabled [ 0.057821] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.057827] ... version: 3 [ 0.057828] ... bit width: 48 [ 0.057828] ... generic registers: 4 [ 0.057829] ... value mask: 0000ffffffffffff [ 0.057830] ... max period: 0000ffffffffffff [ 0.057831] ... fixed-purpose events: 3 [ 0.057831] ... event mask: 000000070000000f [ 0.058951] x86: Booting SMP configuration: [ 0.072130] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.058953] .... node #0, CPUs: #1 #2 #3 [ 0.098576] x86: Booted up 1 node, 4 CPUs [ 0.098578] smpboot: Total of 4 processors activated (26341.35 BogoMIPS) [ 0.101115] devtmpfs: initialized [ 0.102731] EVM: security.selinux [ 0.102732] EVM: security.SMACK64 [ 0.102733] EVM: security.ima [ 0.102734] EVM: security.capability [ 0.102767] PM: Registering ACPI NVS region [mem 0x7871f000-0x787fffff] (921600 bytes) [ 0.102777] PM: Registering ACPI NVS region [mem 0x7a758000-0x7a79afff] (274432 bytes) [ 0.103318] pinctrl core: initialized pinctrl subsystem [ 0.103357] regulator-dummy: no parameters [ 0.103384] RTC time: 8:28:40, date: 07/02/14 [ 0.103406] NET: Registered protocol family 16 [ 0.103475] cpuidle: using governor ladder [ 0.103476] cpuidle: using governor menu [ 0.103499] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.103500] ACPI: bus type PCI registered [ 0.103502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.103535] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.103537] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.109996] PCI: Using configuration type 1 for base access [ 0.110001] dmi type 0xB1 record - unknown flag [ 0.110541] bio: create slab at 0 [ 0.110652] ACPI: Added _OSI(Module Device) [ 0.110653] ACPI: Added _OSI(Processor Device) [ 0.110654] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.110655] ACPI: Added _OSI(Processor Aggregator Device) [ 0.113018] ACPI: Executed 1 blocks of module-level executable AML code [ 0.114877] ACPI: SSDT 0000000079fe1018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.115167] ACPI: Dynamic OEM Table Load: [ 0.115168] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.118785] ACPI: SSDT 0000000079fe2a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.119092] ACPI: Dynamic OEM Table Load: [ 0.119093] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.122689] ACPI: SSDT 0000000079fe8c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.122974] ACPI: Dynamic OEM Table Load: [ 0.122976] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.126988] ACPI: Interpreter enabled [ 0.126993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.126996] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.127006] ACPI: (supports S0 S3 S4 S5) [ 0.127007] ACPI: Using IOAPIC for interrupt routing [ 0.127025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.127134] ACPI: No dock devices found. [ 0.152026] ACPI: Power Resource [FN00] (off) [ 0.152079] ACPI: Power Resource [FN01] (off) [ 0.152128] ACPI: Power Resource [FN02] (off) [ 0.152177] ACPI: Power Resource [FN03] (off) [ 0.152226] ACPI: Power Resource [FN04] (off) [ 0.152721] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.152725] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.152802] \_SB_.PCI0:_OSC invalid UUID [ 0.152803] _OSC request data:1 1f 0 [ 0.152805] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.153235] PCI host bridge to bus 0000:00 [ 0.153237] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.153238] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.153239] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.153240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.153242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.153243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.153244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.153245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.153246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.153247] pci_bus 0000:00: root bus resource [mem 0x7da00000-0xfeafffff] [ 0.153253] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.153317] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.153326] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.153330] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.153334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.153414] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.153435] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.153502] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.153537] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.153563] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.153585] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b00f 64bit] [ 0.153657] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.153722] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.153741] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff] [ 0.153826] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.153864] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.153889] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.153902] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.153966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.154002] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.154023] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.154096] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.154137] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.154159] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.154232] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.154271] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.154297] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 [ 0.154371] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.154410] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.154439] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.154458] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff] [ 0.154543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.154580] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.154606] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100 [ 0.154756] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.154773] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.154780] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.154787] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.154794] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.154802] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.154809] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff] [ 0.154849] pci 0000:00:1f.2: PME# supported from D3hot [ 0.154898] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.154912] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit] [ 0.154931] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.155041] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.155124] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.155143] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.155177] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit] [ 0.155197] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.155287] pci 0000:02:00.0: supports D1 D2 [ 0.155288] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.155324] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.165408] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.165415] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.165421] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.165431] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.165550] pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000 [ 0.165585] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.165769] pci 0000:03:00.0: supports D1 D2 [ 0.165770] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.165812] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.173415] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.173426] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.173846] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.173884] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.173920] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.173956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.173993] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.174030] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.174066] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.174102] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.174313] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.174318] ACPI: \_SB_.PCI0: notify handler is installed [ 0.174360] Found 1 acpi root devices [ 0.174425] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.174427] vgaarb: loaded [ 0.174428] vgaarb: bridge control possible 0000:00:02.0 [ 0.174532] SCSI subsystem initialized [ 0.174572] libata version 3.00 loaded. [ 0.174598] ACPI: bus type USB registered [ 0.174609] usbcore: registered new interface driver usbfs [ 0.174615] usbcore: registered new interface driver hub [ 0.174635] usbcore: registered new device driver usb [ 0.174706] PCI: Using ACPI for IRQ routing [ 0.176123] PCI: pci_cache_line_size set to 64 bytes [ 0.176166] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.176167] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.176168] e820: reserve RAM buffer [mem 0x75ee9000-0x77ffffff] [ 0.176169] e820: reserve RAM buffer [mem 0x76753000-0x77ffffff] [ 0.176170] e820: reserve RAM buffer [mem 0x76fb2000-0x77ffffff] [ 0.176171] e820: reserve RAM buffer [mem 0x7871f000-0x7bffffff] [ 0.176172] e820: reserve RAM buffer [mem 0x79f76000-0x7bffffff] [ 0.176174] e820: reserve RAM buffer [mem 0x7abe1000-0x7bffffff] [ 0.176175] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 0.176176] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff] [ 0.176235] NetLabel: Initializing [ 0.176236] NetLabel: domain hash size = 128 [ 0.176237] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.176245] NetLabel: unlabeled traffic allowed by default [ 0.176288] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.176293] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.178320] Switched to clocksource hpet [ 0.181666] AppArmor: AppArmor Filesystem Enabled [ 0.181687] pnp: PnP ACPI init [ 0.181697] ACPI: bus type PNP registered [ 0.181778] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.181781] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.181790] pnp 00:01: [dma 4] [ 0.181800] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.181811] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.181875] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.181901] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.181902] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.181903] system 00:04: [io 0xffff] has been reserved [ 0.181905] system 00:04: [io 0xffff] has been reserved [ 0.181906] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.181907] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.181909] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.181910] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.181911] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181933] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.181961] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.181963] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.182022] system 00:07: [io 0x0a00-0x0a0f] has been reserved [ 0.182024] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182393] pnp 00:08: [dma 0 disabled] [ 0.182421] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.182451] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.182453] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182470] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.182639] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.182641] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.182642] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.182644] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.182645] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.182646] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.182648] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.182649] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.182650] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.182652] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.182653] system 00:0b: [mem 0x7da00000-0x7da00fff] has been reserved [ 0.182655] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182759] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.182761] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.182762] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.182779] pnp: PnP ACPI: found 13 devices [ 0.182780] ACPI: bus type PNP unregistered [ 0.188750] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.188761] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.188764] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.188769] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.188772] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.188778] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.188783] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.188791] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.188792] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.188793] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.188795] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.188796] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.188797] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.188798] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] [ 0.188799] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff] [ 0.188801] pci_bus 0000:00: resource 12 [mem 0x7da00000-0xfeafffff] [ 0.188802] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.188803] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.188804] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.188806] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.188827] NET: Registered protocol family 2 [ 0.188924] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.188969] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.189021] TCP: Hash tables configured (established 16384 bind 16384) [ 0.189036] TCP: reno registered [ 0.189040] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189049] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189087] NET: Registered protocol family 1 [ 0.189094] pci 0000:00:02.0: Boot video device [ 0.230447] PCI: CLS 64 bytes, default 64 [ 0.230489] Trying to unpack rootfs image as initramfs... [ 0.437607] Freeing initrd memory: 18596K (ffff880035b9e000 - ffff880036dc7000) [ 0.437612] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.437614] software IO TLB [mem 0x6fc00000-0x73c00000] (64MB) mapped at [ffff88006fc00000-ffff880073bfffff] [ 0.437790] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19 [ 0.437794] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19 [ 0.437799] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x19 [ 0.437804] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x19 [ 0.437853] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.437854] Scanning for low memory corruption every 60 seconds [ 0.438047] Initialise system trusted keyring [ 0.438076] audit: initializing netlink socket (disabled) [ 0.438084] type=2000 audit(1404289720.432:1): initialized [ 0.456977] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.457727] VFS: Disk quotas dquot_6.5.2 [ 0.457751] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.458009] fuse init (API version 7.22) [ 0.458055] msgmni has been set to 3682 [ 0.458088] Key type big_key registered [ 0.458446] Key type asymmetric registered [ 0.458448] Asymmetric key parser 'x509' registered [ 0.458471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.458496] io scheduler noop registered [ 0.458497] io scheduler deadline registered (default) [ 0.458513] io scheduler cfq registered [ 0.458860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.458869] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.458891] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 0.458892] vesafb: scrolling: redraw [ 0.458893] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.459487] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5632k, total 5632k [ 0.532625] Console: switching to colour frame buffer device 200x56 [ 0.605557] fb0: VESA VGA frame buffer device [ 0.605577] intel_idle: MWAIT substates: 0x1120 [ 0.605578] intel_idle: v0.4 model 0x3A [ 0.605579] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.605636] ipmi message handler version 39.2 [ 0.605679] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.605682] ACPI: Power Button [PWRB] [ 0.605704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.605706] ACPI: Power Button [PWRF] [ 0.605750] ACPI: Fan [FAN0] (off) [ 0.605765] ACPI: Fan [FAN1] (off) [ 0.605780] ACPI: Fan [FAN2] (off) [ 0.605794] ACPI: Fan [FAN3] (off) [ 0.605809] ACPI: Fan [FAN4] (off) [ 0.614540] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.614542] ACPI: Thermal Zone [TZ00] (28 C) [ 0.614671] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.614672] ACPI: Thermal Zone [TZ01] (30 C) [ 0.614688] GHES: HEST is not enabled! [ 0.614748] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.635456] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.636412] Linux agpgart interface v0.103 [ 0.637148] brd: module loaded [ 0.637594] loop: module loaded [ 0.637788] libphy: Fixed MDIO Bus: probed [ 0.637835] tun: Universal TUN/TAP device driver, 1.6 [ 0.637836] tun: (C) 1999-2004 Max Krasnyansky [ 0.637868] PPP generic driver version 2.4.2 [ 0.637896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.637898] ehci-pci: EHCI PCI platform driver [ 0.637985] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.637988] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.638000] ehci-pci 0000:00:1a.0: debug port 2 [ 0.641906] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.641919] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000 [ 0.650320] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.650354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.650355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.650357] usb usb1: Product: EHCI Host Controller [ 0.650358] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 0.650359] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.650438] hub 1-0:1.0: USB hub found [ 0.650443] hub 1-0:1.0: 2 ports detected [ 0.650582] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.650585] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.650596] ehci-pci 0000:00:1d.0: debug port 2 [ 0.654507] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.654517] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000 [ 0.666319] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.666351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.666353] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.666354] usb usb2: Product: EHCI Host Controller [ 0.666355] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 0.666356] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.666424] hub 2-0:1.0: USB hub found [ 0.666430] hub 2-0:1.0: 2 ports detected [ 0.666498] ehci-platform: EHCI generic platform driver [ 0.666502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.666503] ohci-pci: OHCI PCI platform driver [ 0.666509] ohci-platform: OHCI generic platform driver [ 0.666512] uhci_hcd: USB Universal Host Controller Interface driver [ 0.666594] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.666597] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.666685] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.666703] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X [ 0.666754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.666756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.666757] usb usb3: Product: xHCI Host Controller [ 0.666758] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 0.666759] usb usb3: SerialNumber: 0000:00:14.0 [ 0.666821] hub 3-0:1.0: USB hub found [ 0.666829] hub 3-0:1.0: 4 ports detected [ 0.667041] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.667043] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.667072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.667073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.667075] usb usb4: Product: xHCI Host Controller [ 0.667076] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 0.667077] usb usb4: SerialNumber: 0000:00:14.0 [ 0.667140] hub 4-0:1.0: USB hub found [ 0.667148] hub 4-0:1.0: 4 ports detected [ 0.674374] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.677254] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.677260] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.677450] mousedev: PS/2 mouse device common for all mice [ 0.677738] rtc_cmos 00:05: RTC can wake from S4 [ 0.677907] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.677935] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.677976] device-mapper: uevent: version 1.0.3 [ 0.678070] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.678074] ledtrig-cpu: registered to indicate activity on CPUs [ 0.678135] TCP: cubic registered [ 0.678182] NET: Registered protocol family 10 [ 0.678286] NET: Registered protocol family 17 [ 0.678292] Key type dns_resolver registered [ 0.678583] Loading compiled-in X.509 certificates [ 0.679191] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431' [ 0.679203] registered taskstats version 1 [ 0.681047] Key type trusted registered [ 0.682622] Key type encrypted registered [ 0.684066] AppArmor: AppArmor sha1 policy hashing enabled [ 0.684069] IMA: No TPM chip found, activating TPM-bypass! [ 0.684310] regulator-dummy: disabling [ 0.684369] Magic number: 6:926:471 [ 0.684460] rtc_cmos 00:05: setting system clock to 2014-07-02 08:28:40 UTC (1404289720) [ 0.684850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.684851] EDD information not available. [ 0.684886] PM: Hibernation image not present or could not be loaded. [ 0.685483] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 0.685485] Write protecting the kernel read-only data: 12288k [ 0.687005] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000) [ 0.688294] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 0.703245] systemd-udevd[130]: starting version 204 [ 0.723474] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.723483] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.723939] ahci 0000:00:1f.2: version 3.0 [ 0.724066] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.724094] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.724119] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 0.724123] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 0.730752] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 0.730948] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000332000, a4:1f:72:5f:49:22, XID 0c000800 IRQ 42 [ 0.730951] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.731771] scsi0 : ahci [ 0.731861] scsi1 : ahci [ 0.731917] scsi2 : ahci [ 0.731974] scsi3 : ahci [ 0.732029] scsi4 : ahci [ 0.732083] scsi5 : ahci [ 0.732117] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 41 [ 0.732121] ata2: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16180 irq 41 [ 0.732123] ata3: DUMMY [ 0.732124] ata4: DUMMY [ 0.732125] ata5: DUMMY [ 0.732126] ata6: DUMMY [ 0.962422] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.050358] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.051457] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.051463] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.051466] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.051600] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.053190] ata1.00: ATA-8: WDC WD2500AAKX-75U6AA0, 19.01H19, max UDMA/133 [ 1.053194] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.054387] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.054392] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.054396] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.054528] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.055522] ata1.00: configured for UDMA/133 [ 1.062544] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-7 19.0 PQ: 0 ANSI: 5 [ 1.062660] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.062675] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.062720] sd 0:0:0:0: [sda] Write Protect is off [ 1.062722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.062753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.094745] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.094750] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.094988] hub 1-1:1.0: USB hub found [ 1.095077] hub 1-1:1.0: 6 ports detected [ 1.095233] sda: sda1 sda2 < sda5 > [ 1.095728] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.206393] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.338722] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.338727] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.338975] hub 2-1:1.0: USB hub found [ 1.339072] hub 2-1:1.0: 6 ports detected [ 1.382353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.403548] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.403553] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.403557] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.409037] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.427017] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8D1, D.02, max UDMA/100 [ 1.434342] tsc: Refined TSC clocksource calibration: 3292.521 MHz [ 1.445796] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.445801] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.445804] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.446110] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.464130] ata2.00: configured for UDMA/100 [ 1.473680] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8D1 D.02 PQ: 0 ANSI: 5 [ 1.482334] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.482340] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.482450] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.482503] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.506397] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 1.525041] usb 3-2: New USB device found, idVendor=04f2, idProduct=1123 [ 1.525043] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.525045] usb 3-2: Product: Wireless Device [ 1.525046] usb 3-2: Manufacturer: Chicony [ 1.525137] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.525140] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.527341] hidraw: raw HID events driver (C) Jiri Kosina [ 1.533611] usbcore: registered new interface driver usbhid [ 1.533614] usbhid: USB HID core driver [ 1.535195] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input4 [ 1.535267] chicony 0003:04F2:1123.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:14.0-2/input0 [ 1.535482] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input5 [ 1.535865] chicony 0003:04F2:1123.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:14.0-2/input1 [ 1.690344] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.716851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.782228] usb 3-4: New USB device found, idVendor=0c45, idProduct=64d8 [ 1.782233] usb 3-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.782236] usb 3-4: Product: Laptop_Integrated_Webcam_HD [ 1.782239] usb 3-4: Manufacturer: CN0VHGJR724872CO002WX01 [ 2.242743] random: init urandom read with 91 bits of entropy available [ 2.434372] Switched to clocksource tsc [ 3.099692] random: nonblocking pool is initialized [ 7.623698] Adding 1979388k swap on /dev/sda5. Priority:-1 extents:1 across:1979388k FS [ 7.785601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.024417] systemd-udevd[313]: starting version 204 [ 8.847267] lp: driver loaded but no devices found [ 8.980676] ppdev: user-space parallel port driver [ 9.042331] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 9.042338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.042343] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 9.042346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.042348] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPLV 1 (20131115/utaddress-251) [ 9.042355] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIN 2 (20131115/utaddress-251) [ 9.042357] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251) [ 9.042360] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.042362] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.049211] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 9.075328] wmi: Mapper loaded [ 9.092399] [drm] Initialized drm 1.1.0 20060810 [ 9.234424] cfg80211: Calling CRDA to update world regulatory domain [ 9.270414] lib80211: common routines for IEEE802.11 drivers [ 9.270418] lib80211_crypt: registered algorithm 'NULL' [ 9.425148] type=1400 audit(1404289729.235:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=379 comm="apparmor_parser" [ 9.425154] type=1400 audit(1404289729.235:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=379 comm="apparmor_parser" [ 9.425157] type=1400 audit(1404289729.235:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser" [ 9.425458] type=1400 audit(1404289729.235:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=379 comm="apparmor_parser" [ 9.425463] type=1400 audit(1404289729.235:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser" [ 9.425665] type=1400 audit(1404289729.235:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser" [ 9.438118] intel_rapl: domain uncore energy ctr 5282:5282 not working, skip [ 9.447298] [drm] Memory usable by graphics device = 2048M [ 9.447303] checking generic (e0000000 580000) vs hw (e0000000 10000000) [ 9.447305] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 9.447329] Console: switching to colour dummy device 80x25 [ 9.479807] wl: module license 'MIXED/Proprietary' taints kernel. [ 9.479810] Disabling lock debugging due to kernel taint [ 9.481889] wl: module verification failed: signature and/or required key missing - tainting kernel [ 9.506288] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 9.506296] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.506297] [drm] Driver supports precise vblank timestamp query. [ 9.506385] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.514810] INFO @wl_cfg80211_attach : Registered CFG80211 phy [ 9.517957] lib80211_crypt: registered algorithm 'TKIP' [ 9.528124] input: Dell AIO WMI hotkeys as /devices/virtual/input/input7 [ 9.561899] wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941) [ 9.573548] fbcon: inteldrmfb (fb0) is primary device [ 9.629168] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.893043] cfg80211: World regulatory domain updated: [ 9.893044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.893045] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.893045] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.893046] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.893046] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.893047] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.904598] Linux video capture interface: v2.00 [ 10.120673] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d8) [ 10.153409] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input8 [ 10.153517] usbcore: registered new interface driver uvcvideo [ 10.153517] USB Video Class driver (1.1.1) [ 10.794454] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 11.278137] Console: switching to colour frame buffer device 200x56 [ 11.280908] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.280909] i915 0000:00:02.0: registered panic notifier [ 11.281085] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.281106] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.281269] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 11.349986] SKU: Nid=0x1d sku_cfg=0x40600001 [ 11.349988] SKU: port_connectivity=0x1 [ 11.349990] SKU: enable_pcbeep=0x0 [ 11.349991] SKU: check_sum=0x00000000 [ 11.349992] SKU: customization=0x00000000 [ 11.349993] SKU: external_amp=0x0 [ 11.349994] SKU: platform_type=0x0 [ 11.349995] SKU: swap=0x0 [ 11.349996] SKU: override=0x1 [ 11.350257] autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker [ 11.350259] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.350261] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 11.350262] mono: mono_out=0x0 [ 11.350263] inputs: [ 11.350265] Mic=0x18 [ 11.350266] Internal Mic=0x12 [ 11.350268] realtek: No valid SSID, checking pincfg 0x40600001 for NID 0x1d [ 11.350269] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0280 [ 11.354023] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.354101] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.759662] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.258442] init: failsafe main process (647) killed by TERM signal [ 15.817913] type=1400 audit(1404289735.627:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=760 comm="apparmor_parser" [ 15.817919] type=1400 audit(1404289735.627:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser" [ 15.817932] type=1400 audit(1404289735.627:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser" [ 15.818238] type=1400 audit(1404289735.631:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser" [ 15.818241] type=1400 audit(1404289735.631:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser" [ 15.818397] type=1400 audit(1404289735.631:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser" [ 15.820305] type=1400 audit(1404289735.631:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=764 comm="apparmor_parser" [ 15.823106] type=1400 audit(1404289735.635:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=765 comm="apparmor_parser" [ 15.823111] type=1400 audit(1404289735.635:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=765 comm="apparmor_parser" [ 15.823407] type=1400 audit(1404289735.635:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=765 comm="apparmor_parser" [ 16.986225] Bluetooth: Core ver 2.17 [ 16.986236] NET: Registered protocol family 31 [ 16.986237] Bluetooth: HCI device and connection manager initialized [ 16.986245] Bluetooth: HCI socket layer initialized [ 16.986246] Bluetooth: L2CAP socket layer initialized [ 16.986249] Bluetooth: SCO socket layer initialized [ 17.287666] init: cups main process (912) killed by HUP signal [ 17.287675] init: cups main process ended, respawning [ 17.291627] Bluetooth: RFCOMM TTY layer initialized [ 17.291637] Bluetooth: RFCOMM socket layer initialized [ 17.291642] Bluetooth: RFCOMM ver 1.11 [ 17.855038] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.855041] Bluetooth: BNEP filters: protocol multicast [ 17.855048] Bluetooth: BNEP socket layer initialized [ 18.528004] r8169 0000:02:00.0 eth0: link down [ 18.528050] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.528285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.543215] init: plymouth-upstart-bridge main process ended, respawning [ 19.555235] init: plymouth-upstart-bridge main process ended, respawning [ 21.337880] cfg80211: Calling CRDA for country: TW [ 21.339751] cfg80211: Regulatory domain changed to country: TW [ 21.339754] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.339756] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.339757] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 21.339758] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 44.057281] ERROR @wl_inform_single_bss : cfg80211_inform_bss_frame error [ 46.791118] audit_printk_skb: 132 callbacks suppressed [ 46.791121] type=1400 audit(1404289767.620:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2010 comm="apparmor_parser" [ 46.791126] type=1400 audit(1404289767.620:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2010 comm="apparmor_parser" [ 46.791425] type=1400 audit(1404289767.620:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2010 comm="apparmor_parser" [ 79.886088] Starting fwts suspend [ 79.886114] FWTS_SUSPEND [ 80.753481] PM: Syncing filesystems ... done. [ 80.854394] PM: Preparing system for mem sleep [ 80.854522] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 80.856040] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 80.857152] PM: Entering mem sleep [ 80.857210] Suspending console(s) (use no_console_suspend to debug) [ 80.858132] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 80.858415] sd 0:0:0:0: [sda] Stopping disk [ 80.892864] cfg80211: Calling CRDA to update world regulatory domain [ 80.893443] serial 00:08: disabled [ 82.064364] PM: suspend of devices complete after 1207.089 msecs [ 82.064467] PM: late suspend of devices complete after 0.101 msecs [ 82.064627] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 82.080352] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 82.096430] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 82.128279] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 82.144280] PM: noirq suspend of devices complete after 79.813 msecs [ 82.144442] ACPI: Preparing to enter system sleep state S3 [ 82.144590] PM: Saving platform NVS memory [ 82.145284] Disabling non-boot CPUs ... [ 82.146545] kvm: disabling virtualization on CPU1 [ 82.248252] smpboot: CPU 1 is now offline [ 82.249626] kvm: disabling virtualization on CPU2 [ 82.352249] smpboot: CPU 2 is now offline [ 82.352575] Broke affinity for irq 16 [ 82.352593] Broke affinity for irq 23 [ 82.352594] Broke affinity for irq 40 [ 82.352595] Broke affinity for irq 41 [ 82.353596] kvm: disabling virtualization on CPU3 [ 82.456241] smpboot: CPU 3 is now offline [ 82.457276] ACPI: Low-level resume complete [ 82.457313] PM: Restoring platform NVS memory [ 82.457784] Enabling non-boot CPUs ... [ 82.457817] x86: Booting SMP configuration: [ 82.457817] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 82.468788] kvm: enabling virtualization on CPU1 [ 82.471124] CPU1 is up [ 82.471139] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 82.482206] kvm: enabling virtualization on CPU2 [ 82.484492] CPU2 is up [ 82.484505] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 82.495467] kvm: enabling virtualization on CPU3 [ 82.497763] CPU3 is up [ 82.500338] ACPI: Waking up from system sleep state S3 [ 82.529659] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 82.561635] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 82.593638] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 82.641737] PM: noirq resume of devices complete after 140.967 msecs [ 82.641863] PM: early resume of devices complete after 0.068 msecs [ 82.641963] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 82.642302] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 82.645704] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 82.679570] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20131115/dsopcode-236) [ 82.679574] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff880079715c58), AE_AML_BUFFER_LIMIT (20131115/psparse-536) [ 82.679579] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff880079715ed8), AE_AML_BUFFER_LIMIT (20131115/psparse-536) [ 82.679581] serial 00:08: activation failed [ 82.679585] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -5 [ 82.679586] PM: Device 00:08 failed to resume: error -5 [ 82.719691] r8169 0000:02:00.0 eth0: link down [ 82.861738] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 82.861748] usb 3-4: Device not responding to set address. [ 83.005596] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 83.028740] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 83.028743] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 83.028745] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 83.035833] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 83.065577] usb 3-4: Device not responding to set address. [ 83.066909] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 83.066911] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 83.066913] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 83.155680] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 83.168309] ata2.00: configured for UDMA/100 [ 83.269579] usb 3-4: device not accepting address 3, error -71 [ 83.781557] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 88.037474] ata1: link is slow to respond, please be patient (ready=0) [ 88.821461] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 89.324551] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 89.324553] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 89.324556] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 89.324684] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 89.352399] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 89.352402] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 89.352404] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 89.352507] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 89.353397] ata1.00: configured for UDMA/133 [ 89.377469] sd 0:0:0:0: [sda] Starting disk [ 89.383118] PM: resume of devices complete after 6741.423 msecs [ 89.383257] PM: Finishing wakeup. [ 89.383258] Restarting tasks ... done. [ 89.391295] cfg80211: World regulatory domain updated: [ 89.391299] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 89.391301] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.391302] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.391304] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 89.391305] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.391307] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.401415] usb 3-4: USB disconnect, device number 3 [ 89.433636] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800367426c0 [ 89.648768] FWTS_RESUME [ 89.648802] Finished fwts resume [ 89.673452] usb 3-4: new high-speed USB device number 4 using xhci_hcd [ 89.673514] usb 3-4: Device not responding to set address. [ 89.877478] usb 3-4: Device not responding to set address. [ 90.081450] usb 3-4: device not accepting address 4, error -71 [ 90.377471] usb 3-4: new high-speed USB device number 6 using xhci_hcd [ 90.377504] usb 3-4: Device not responding to set address. [ 90.581480] usb 3-4: Device not responding to set address. [ 90.785433] usb 3-4: device not accepting address 6, error -71 [ 91.081452] usb 3-4: new high-speed USB device number 8 using xhci_hcd [ 91.081507] usb 3-4: Device not responding to set address. [ 91.390055] usb 3-4: Device not responding to set address. [ 91.393502] cfg80211: Calling CRDA for country: TW [ 91.396486] cfg80211: Regulatory domain changed to country: TW [ 91.396490] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 91.396493] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 91.396495] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 91.396497] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 91.593385] usb 3-4: device not accepting address 8, error -71 [ 91.889414] usb 3-4: new high-speed USB device number 10 using xhci_hcd [ 91.889444] usb 3-4: Device not responding to set address. [ 92.093501] usb 3-4: Device not responding to set address. [ 92.297340] usb 3-4: device not accepting address 10, error -71 [ 92.593431] usb 3-4: new high-speed USB device number 12 using xhci_hcd [ 92.593497] usb 3-4: Device not responding to set address. [ 92.797372] usb 3-4: Device not responding to set address. [ 93.001404] usb 3-4: device not accepting address 12, error -71 [ 93.297465] usb 3-4: new high-speed USB device number 14 using xhci_hcd [ 93.297556] usb 3-4: Device not responding to set address. [ 93.501342] usb 3-4: Device not responding to set address. [ 93.705353] usb 3-4: device not accepting address 14, error -71 [ 94.001327] usb 3-4: new high-speed USB device number 16 using xhci_hcd [ 94.001349] usb 3-4: Device not responding to set address. [ 94.205317] usb 3-4: Device not responding to set address. [ 94.409288] usb 3-4: device not accepting address 16, error -71 [ 94.705318] usb 3-4: new high-speed USB device number 18 using xhci_hcd [ 94.705342] usb 3-4: Device not responding to set address. [ 94.909312] usb 3-4: Device not responding to set address. [ 95.113287] usb 3-4: device not accepting address 18, error -71 [ 95.409340] usb 3-4: new high-speed USB device number 20 using xhci_hcd [ 95.409398] usb 3-4: Device not responding to set address. [ 95.613392] usb 3-4: Device not responding to set address. [ 95.817358] usb 3-4: device not accepting address 20, error -71 [ 96.113344] usb 3-4: new high-speed USB device number 22 using xhci_hcd [ 96.113376] usb 3-4: Device not responding to set address. [ 96.317339] usb 3-4: Device not responding to set address. [ 96.521281] usb 3-4: device not accepting address 22, error -71 [ 96.817319] usb 3-4: new high-speed USB device number 24 using xhci_hcd [ 96.817373] usb 3-4: Device not responding to set address. [ 97.021317] usb 3-4: Device not responding to set address. [ 97.225264] usb 3-4: device not accepting address 24, error -71 [ 97.521310] usb 3-4: new high-speed USB device number 26 using xhci_hcd [ 97.521344] usb 3-4: Device not responding to set address. [ 97.725297] usb 3-4: Device not responding to set address. [ 97.929245] usb 3-4: device not accepting address 26, error -71 [ 98.225285] usb 3-4: new high-speed USB device number 28 using xhci_hcd [ 98.225338] usb 3-4: Device not responding to set address. [ 98.429234] usb 3-4: Device not responding to set address. [ 98.633213] usb 3-4: device not accepting address 28, error -71 [ 98.929244] usb 3-4: new high-speed USB device number 30 using xhci_hcd [ 98.929313] usb 3-4: Device not responding to set address. [ 99.133240] usb 3-4: Device not responding to set address. [ 99.337208] usb 3-4: device not accepting address 30, error -71 [ 99.633220] usb 3-4: new high-speed USB device number 32 using xhci_hcd [ 99.633247] usb 3-4: Device not responding to set address. [ 99.837221] usb 3-4: Device not responding to set address. [ 100.041192] usb 3-4: device not accepting address 32, error -71 [ 100.337201] usb 3-4: new high-speed USB device number 34 using xhci_hcd [ 100.337228] usb 3-4: Device not responding to set address. [ 100.541203] usb 3-4: Device not responding to set address. [ 100.745175] usb 3-4: device not accepting address 34, error -71 [ 101.041185] usb 3-4: new high-speed USB device number 36 using xhci_hcd [ 101.041240] usb 3-4: Device not responding to set address. [ 101.245154] usb 3-4: Device not responding to set address. [ 101.449134] usb 3-4: device not accepting address 36, error -71 [ 101.745166] usb 3-4: new high-speed USB device number 38 using xhci_hcd [ 101.745235] usb 3-4: Device not responding to set address. [ 101.949167] usb 3-4: Device not responding to set address. [ 102.153140] usb 3-4: device not accepting address 38, error -71 [ 102.449148] usb 3-4: new high-speed USB device number 40 using xhci_hcd [ 102.449175] usb 3-4: Device not responding to set address. [ 102.653126] usb 3-4: Device not responding to set address. [ 102.857123] usb 3-4: device not accepting address 40, error -71 [ 103.153129] usb 3-4: new high-speed USB device number 42 using xhci_hcd [ 103.153198] usb 3-4: Device not responding to set address. [ 103.357131] usb 3-4: Device not responding to set address. [ 103.561103] usb 3-4: device not accepting address 42, error -71 [ 103.857114] usb 3-4: new high-speed USB device number 44 using xhci_hcd [ 103.857142] usb 3-4: Device not responding to set address. [ 104.061120] usb 3-4: Device not responding to set address. [ 104.265058] usb 3-4: device not accepting address 44, error -71 [ 104.561084] usb 3-4: new high-speed USB device number 46 using xhci_hcd [ 104.561108] usb 3-4: Device not responding to set address. [ 104.765071] usb 3-4: Device not responding to set address. [ 104.969053] usb 3-4: device not accepting address 46, error -71 [ 105.265051] usb 3-4: new high-speed USB device number 48 using xhci_hcd [ 105.265075] usb 3-4: Device not responding to set address. [ 105.469052] usb 3-4: Device not responding to set address. [ 105.673050] usb 3-4: device not accepting address 48, error -71 [ 105.969060] usb 3-4: new high-speed USB device number 50 using xhci_hcd [ 105.969133] usb 3-4: Device not responding to set address. [ 106.173060] usb 3-4: Device not responding to set address. [ 106.377031] usb 3-4: device not accepting address 50, error -71 [ 106.673042] usb 3-4: new high-speed USB device number 52 using xhci_hcd [ 106.673070] usb 3-4: Device not responding to set address. [ 106.877068] usb 3-4: Device not responding to set address. [ 107.081014] usb 3-4: device not accepting address 52, error -71 [ 107.377022] usb 3-4: new high-speed USB device number 54 using xhci_hcd [ 107.377050] usb 3-4: Device not responding to set address. [ 107.581025] usb 3-4: Device not responding to set address. [ 107.784967] usb 3-4: device not accepting address 54, error -71 [ 108.081035] usb 3-4: new high-speed USB device number 56 using xhci_hcd [ 108.081065] usb 3-4: Device not responding to set address. [ 108.284978] usb 3-4: Device not responding to set address. [ 108.488978] usb 3-4: device not accepting address 56, error -71 [ 108.785021] usb 3-4: new high-speed USB device number 58 using xhci_hcd [ 108.785074] usb 3-4: Device not responding to set address. [ 108.989025] usb 3-4: Device not responding to set address. [ 109.192961] usb 3-4: device not accepting address 58, error -71 [ 109.489001] usb 3-4: new high-speed USB device number 60 using xhci_hcd [ 109.489031] usb 3-4: Device not responding to set address. [ 109.693001] usb 3-4: Device not responding to set address. [ 109.896948] usb 3-4: device not accepting address 60, error -71 [ 110.192984] usb 3-4: new high-speed USB device number 62 using xhci_hcd [ 110.193039] usb 3-4: Device not responding to set address. [ 110.396980] usb 3-4: Device not responding to set address. [ 110.600928] usb 3-4: device not accepting address 62, error -71 [ 110.896934] usb 3-4: new high-speed USB device number 64 using xhci_hcd [ 110.896961] usb 3-4: Device not responding to set address. [ 111.100914] usb 3-4: Device not responding to set address. [ 111.304908] usb 3-4: device not accepting address 64, error -71 [ 111.600948] usb 3-4: new high-speed USB device number 66 using xhci_hcd [ 111.600977] usb 3-4: Device not responding to set address. [ 111.804942] usb 3-4: Device not responding to set address. [ 112.008890] usb 3-4: device not accepting address 66, error -71 [ 112.304933] usb 3-4: new high-speed USB device number 68 using xhci_hcd [ 112.304961] usb 3-4: Device not responding to set address. [ 112.508925] usb 3-4: Device not responding to set address. [ 112.712874] usb 3-4: device not accepting address 68, error -71 [ 113.008883] usb 3-4: new high-speed USB device number 70 using xhci_hcd [ 113.008938] usb 3-4: Device not responding to set address. [ 113.212857] usb 3-4: Device not responding to set address. [ 113.416836] usb 3-4: device not accepting address 70, error -71 [ 113.712865] usb 3-4: new high-speed USB device number 72 using xhci_hcd [ 113.712891] usb 3-4: Device not responding to set address. [ 113.916892] usb 3-4: Device not responding to set address. [ 114.120841] usb 3-4: device not accepting address 72, error -71 [ 114.416845] usb 3-4: new high-speed USB device number 74 using xhci_hcd [ 114.416873] usb 3-4: Device not responding to set address. [ 114.620872] usb 3-4: Device not responding to set address. [ 114.824819] usb 3-4: device not accepting address 74, error -71 [ 115.120829] usb 3-4: new high-speed USB device number 76 using xhci_hcd [ 115.120857] usb 3-4: Device not responding to set address. [ 115.324854] usb 3-4: Device not responding to set address. [ 115.528802] usb 3-4: device not accepting address 76, error -71 [ 115.824811] usb 3-4: new high-speed USB device number 78 using xhci_hcd [ 115.824839] usb 3-4: Device not responding to set address. [ 116.028820] usb 3-4: Device not responding to set address. [ 116.232786] usb 3-4: device not accepting address 78, error -71 [ 116.528793] usb 3-4: new high-speed USB device number 80 using xhci_hcd [ 116.528819] usb 3-4: Device not responding to set address. [ 116.732820] usb 3-4: Device not responding to set address. [ 116.936753] usb 3-4: device not accepting address 80, error -71 [ 117.232775] usb 3-4: new high-speed USB device number 82 using xhci_hcd [ 117.232802] usb 3-4: Device not responding to set address. [ 117.436828] usb 3-4: Device not responding to set address. [ 117.640752] usb 3-4: device not accepting address 82, error -71 [ 117.936755] usb 3-4: new high-speed USB device number 84 using xhci_hcd [ 117.936782] usb 3-4: Device not responding to set address. [ 118.140782] usb 3-4: Device not responding to set address. [ 118.344734] usb 3-4: device not accepting address 84, error -71 [ 118.640740] usb 3-4: new high-speed USB device number 86 using xhci_hcd [ 118.640812] usb 3-4: Device not responding to set address. [ 118.844718] usb 3-4: Device not responding to set address. [ 119.048712] usb 3-4: device not accepting address 86, error -71 [ 119.344720] usb 3-4: new high-speed USB device number 88 using xhci_hcd [ 119.344747] usb 3-4: Device not responding to set address. [ 119.548699] usb 3-4: Device not responding to set address. [ 119.752675] usb 3-4: device not accepting address 88, error -71 [ 120.048675] usb 3-4: new high-speed USB device number 90 using xhci_hcd [ 120.048701] usb 3-4: Device not responding to set address. [ 120.252728] usb 3-4: Device not responding to set address. [ 120.456647] usb 3-4: device not accepting address 90, error -71 [ 120.752685] usb 3-4: new high-speed USB device number 92 using xhci_hcd [ 120.752739] usb 3-4: Device not responding to set address. [ 120.956711] usb 3-4: Device not responding to set address. [ 121.160660] usb 3-4: device not accepting address 92, error -71 [ 121.456668] usb 3-4: new high-speed USB device number 94 using xhci_hcd [ 121.456694] usb 3-4: Device not responding to set address. [ 121.660696] usb 3-4: Device not responding to set address. [ 121.864643] usb 3-4: device not accepting address 94, error -71 [ 122.160650] usb 3-4: new high-speed USB device number 96 using xhci_hcd [ 122.160677] usb 3-4: Device not responding to set address. [ 122.364620] usb 3-4: Device not responding to set address. [ 122.568623] usb 3-4: device not accepting address 96, error -71 [ 122.864633] usb 3-4: new high-speed USB device number 98 using xhci_hcd [ 122.864660] usb 3-4: Device not responding to set address. [ 123.068635] usb 3-4: Device not responding to set address. [ 123.272610] usb 3-4: device not accepting address 98, error -71 [ 123.568613] usb 3-4: new high-speed USB device number 100 using xhci_hcd [ 123.568639] usb 3-4: Device not responding to set address. [ 123.772643] usb 3-4: Device not responding to set address. [ 123.976591] usb 3-4: device not accepting address 100, error -71 [ 124.272600] usb 3-4: new high-speed USB device number 102 using xhci_hcd [ 124.272655] usb 3-4: Device not responding to set address. [ 124.476623] usb 3-4: Device not responding to set address. [ 124.680571] usb 3-4: device not accepting address 102, error -71 [ 124.976579] usb 3-4: new high-speed USB device number 104 using xhci_hcd [ 124.976605] usb 3-4: Device not responding to set address. [ 125.180590] usb 3-4: Device not responding to set address. [ 125.384552] usb 3-4: device not accepting address 104, error -71 [ 125.680562] usb 3-4: new high-speed USB device number 106 using xhci_hcd [ 125.680589] usb 3-4: Device not responding to set address. [ 125.884551] usb 3-4: Device not responding to set address. [ 126.088535] usb 3-4: device not accepting address 106, error -71 [ 126.384513] usb 3-4: new high-speed USB device number 108 using xhci_hcd [ 126.384539] usb 3-4: Device not responding to set address. [ 126.588572] usb 3-4: Device not responding to set address. [ 126.792518] usb 3-4: device not accepting address 108, error -71 [ 127.088510] usb 3-4: new high-speed USB device number 110 using xhci_hcd [ 127.088573] usb 3-4: Device not responding to set address. [ 127.292555] usb 3-4: Device not responding to set address. [ 127.496503] usb 3-4: device not accepting address 110, error -71 [ 127.792492] usb 3-4: new high-speed USB device number 112 using xhci_hcd [ 127.792518] usb 3-4: Device not responding to set address. [ 127.996533] usb 3-4: Device not responding to set address. [ 128.200479] usb 3-4: device not accepting address 112, error -71 [ 128.496490] usb 3-4: new high-speed USB device number 114 using xhci_hcd [ 128.496518] usb 3-4: Device not responding to set address. [ 128.700458] usb 3-4: Device not responding to set address. [ 128.904464] usb 3-4: device not accepting address 114, error -71 [ 129.200473] usb 3-4: new high-speed USB device number 116 using xhci_hcd [ 129.200500] usb 3-4: Device not responding to set address. [ 129.404510] usb 3-4: Device not responding to set address. [ 129.608416] usb 3-4: device not accepting address 116, error -71 [ 129.904487] usb 3-4: new high-speed USB device number 118 using xhci_hcd [ 129.904516] usb 3-4: Device not responding to set address. [ 130.108449] usb 3-4: Device not responding to set address. [ 130.312426] usb 3-4: device not accepting address 118, error -71 [ 130.608427] usb 3-4: new high-speed USB device number 120 using xhci_hcd [ 130.608489] usb 3-4: Device not responding to set address. [ 130.812462] usb 3-4: Device not responding to set address. [ 131.016379] usb 3-4: device not accepting address 120, error -71 [ 131.312428] usb 3-4: new high-speed USB device number 122 using xhci_hcd [ 131.312483] usb 3-4: Device not responding to set address. [ 131.516444] usb 3-4: Device not responding to set address. [ 131.720391] usb 3-4: device not accepting address 122, error -71 [ 132.016381] usb 3-4: new high-speed USB device number 124 using xhci_hcd [ 132.016407] usb 3-4: Device not responding to set address. [ 132.220430] usb 3-4: Device not responding to set address. [ 132.424377] usb 3-4: device not accepting address 124, error -71 [ 132.720385] usb 3-4: new high-speed USB device number 126 using xhci_hcd [ 132.720412] usb 3-4: Device not responding to set address. [ 132.924434] usb 3-4: Device not responding to set address. [ 133.128356] usb 3-4: device not accepting address 126, error -71 [ 133.424365] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 133.424393] usb 3-4: Device not responding to set address. [ 133.628391] usb 3-4: Device not responding to set address. [ 133.832338] usb 3-4: device not accepting address 3, error -71 [ 134.128349] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 134.128404] usb 3-4: Device not responding to set address. [ 134.332372] usb 3-4: Device not responding to set address. [ 134.536324] usb 3-4: device not accepting address 5, error -71 [ 134.832390] usb 3-4: new high-speed USB device number 7 using xhci_hcd [ 134.832458] usb 3-4: Device not responding to set address. [ 135.036292] usb 3-4: Device not responding to set address. [ 135.240292] usb 3-4: device not accepting address 7, error -71 [ 135.536348] usb 3-4: new high-speed USB device number 9 using xhci_hcd [ 135.536407] usb 3-4: Device not responding to set address. [ 135.740336] usb 3-4: Device not responding to set address. [ 135.944282] usb 3-4: device not accepting address 9, error -71 [ 136.240326] usb 3-4: new high-speed USB device number 11 using xhci_hcd [ 136.240383] usb 3-4: Device not responding to set address. [ 136.444318] usb 3-4: Device not responding to set address. [ 136.648268] usb 3-4: device not accepting address 11, error -71 [ 136.944311] usb 3-4: new high-speed USB device number 13 using xhci_hcd [ 136.944368] usb 3-4: Device not responding to set address. [ 136.976765] Starting fwts suspend [ 136.976789] FWTS_SUSPEND [ 137.148255] usb 3-4: Device not responding to set address. [ 137.352220] usb 3-4: device not accepting address 13, error -71 [ 137.320481] PM: Syncing filesystems ... done. [ 137.435422] PM: Preparing system for mem sleep [ 137.435547] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 137.648220] usb 3-4: new high-speed USB device number 15 using xhci_hcd [ 137.648294] usb 3-4: Device not responding to set address. [ 137.852215] usb 3-4: Device not responding to set address. [ 138.056205] usb 3-4: device not accepting address 15, error -71 [ 138.352322] usb 3-4: new high-speed USB device number 17 using xhci_hcd [ 138.352401] usb 3-4: Device not responding to set address. [ 138.556199] usb 3-4: Device not responding to set address. [ 138.760190] usb 3-4: device not accepting address 17, error -71 [ 139.056245] usb 3-4: new high-speed USB device number 19 using xhci_hcd [ 139.056307] usb 3-4: Device not responding to set address. [ 139.260213] usb 3-4: Device not responding to set address. [ 139.464158] usb 3-4: device not accepting address 19, error -71 [ 139.760301] usb 3-4: new high-speed USB device number 21 using xhci_hcd [ 139.760377] usb 3-4: Device not responding to set address. [ 139.981051] usb 3-4: Device not responding to set address. [ 140.184156] usb 3-4: device not accepting address 21, error -71 [ 140.480284] usb 3-4: new high-speed USB device number 23 using xhci_hcd [ 140.480313] usb 3-4: Device not responding to set address. [ 140.684158] usb 3-4: Device not responding to set address. [ 140.888136] usb 3-4: device not accepting address 23, error -71 [ 141.188151] usb 3-4: new high-speed USB device number 25 using xhci_hcd [ 141.188176] usb 3-4: Device not responding to set address. [ 141.392147] usb 3-4: Device not responding to set address. [ 141.596121] usb 3-4: device not accepting address 25, error -71 [ 141.892207] usb 3-4: new high-speed USB device number 27 using xhci_hcd [ 141.892223] usb 3-4: Device not responding to set address. [ 142.096124] usb 3-4: Device not responding to set address. [ 142.300101] usb 3-4: device not accepting address 27, error -71 [ 142.596109] usb 3-4: new high-speed USB device number 29 using xhci_hcd [ 142.596134] usb 3-4: Device not responding to set address. [ 142.800106] usb 3-4: Device not responding to set address. [ 143.004082] usb 3-4: device not accepting address 29, error -71 [ 143.300095] usb 3-4: new high-speed USB device number 31 using xhci_hcd [ 143.300120] usb 3-4: Device not responding to set address. [ 143.504085] usb 3-4: Device not responding to set address. [ 143.708087] usb 3-4: device not accepting address 31, error -71 [ 144.004069] usb 3-4: new high-speed USB device number 33 using xhci_hcd [ 144.004095] usb 3-4: Device not responding to set address. [ 144.208076] usb 3-4: Device not responding to set address. [ 144.412037] usb 3-4: device not accepting address 33, error -71 [ 144.708069] usb 3-4: new high-speed USB device number 35 using xhci_hcd [ 144.708124] usb 3-4: Device not responding to set address. [ 144.912051] usb 3-4: Device not responding to set address. [ 145.116026] usb 3-4: device not accepting address 35, error -71 [ 145.412036] usb 3-4: new high-speed USB device number 37 using xhci_hcd [ 145.412060] usb 3-4: Device not responding to set address. [ 145.616035] usb 3-4: Device not responding to set address. [ 145.820092] usb 3-4: device not accepting address 37, error -71 [ 146.124016] usb 3-4: new high-speed USB device number 39 using xhci_hcd [ 146.124042] usb 3-4: Device not responding to set address. [ 146.328020] usb 3-4: Device not responding to set address. [ 146.532081] usb 3-4: device not accepting address 39, error -71 [ 146.828073] usb 3-4: new high-speed USB device number 41 using xhci_hcd [ 146.828090] usb 3-4: Device not responding to set address. [ 147.031997] usb 3-4: Device not responding to set address. [ 147.236063] usb 3-4: device not accepting address 41, error -71 [ 147.532095] usb 3-4: new high-speed USB device number 43 using xhci_hcd [ 147.532120] usb 3-4: Device not responding to set address. [ 147.735979] usb 3-4: Device not responding to set address. [ 147.940044] usb 3-4: device not accepting address 43, error -71 [ 148.236086] usb 3-4: new high-speed USB device number 45 using xhci_hcd [ 148.236111] usb 3-4: Device not responding to set address. [ 148.439961] usb 3-4: Device not responding to set address. [ 148.644027] usb 3-4: device not accepting address 45, error -71 [ 148.939959] usb 3-4: new high-speed USB device number 47 using xhci_hcd [ 148.939980] usb 3-4: Device not responding to set address. [ 149.144011] usb 3-4: Device not responding to set address. [ 149.348009] usb 3-4: device not accepting address 47, error -71 [ 149.644020] usb 3-4: new high-speed USB device number 49 using xhci_hcd [ 149.644035] usb 3-4: Device not responding to set address. [ 149.848019] usb 3-4: Device not responding to set address. [ 150.051991] usb 3-4: device not accepting address 49, error -71 [ 150.348031] usb 3-4: new high-speed USB device number 51 using xhci_hcd [ 150.348061] usb 3-4: Device not responding to set address. [ 150.551909] usb 3-4: Device not responding to set address. [ 150.755972] usb 3-4: device not accepting address 51, error -71 [ 151.052002] usb 3-4: new high-speed USB device number 53 using xhci_hcd [ 151.052019] usb 3-4: Device not responding to set address. [ 151.255891] usb 3-4: Device not responding to set address. [ 151.459956] usb 3-4: device not accepting address 53, error -71 [ 151.755966] usb 3-4: new high-speed USB device number 55 using xhci_hcd [ 151.755981] usb 3-4: Device not responding to set address. [ 151.959873] usb 3-4: Device not responding to set address. [ 152.163938] usb 3-4: device not accepting address 55, error -71 [ 152.459980] usb 3-4: new high-speed USB device number 57 using xhci_hcd [ 152.460009] usb 3-4: Device not responding to set address. [ 152.663878] usb 3-4: Device not responding to set address. [ 152.867919] usb 3-4: device not accepting address 57, error -71 [ 153.163927] usb 3-4: new high-speed USB device number 59 using xhci_hcd [ 153.163945] usb 3-4: Device not responding to set address. [ 153.367837] usb 3-4: Device not responding to set address. [ 153.571902] usb 3-4: device not accepting address 59, error -71 [ 153.867884] usb 3-4: new high-speed USB device number 61 using xhci_hcd [ 153.867924] usb 3-4: Device not responding to set address. [ 154.071819] usb 3-4: Device not responding to set address. [ 154.275884] usb 3-4: device not accepting address 61, error -71 [ 154.571869] usb 3-4: new high-speed USB device number 63 using xhci_hcd [ 154.571907] usb 3-4: Device not responding to set address. [ 154.775790] usb 3-4: Device not responding to set address. [ 154.980584] usb 3-4: device not accepting address 63, error -71 [ 155.331906] usb 3-4: new high-speed USB device number 65 using xhci_hcd [ 155.331981] usb 3-4: Device not responding to set address. [ 155.535789] usb 3-4: Device not responding to set address. [ 155.739762] usb 3-4: device not accepting address 65, error -71 [ 156.035889] usb 3-4: new high-speed USB device number 67 using xhci_hcd [ 156.035938] usb 3-4: Device not responding to set address. [ 156.239767] usb 3-4: Device not responding to set address. [ 156.443741] usb 3-4: device not accepting address 67, error -71 [ 156.739871] usb 3-4: new high-speed USB device number 69 using xhci_hcd [ 156.739921] usb 3-4: Device not responding to set address. [ 156.943747] usb 3-4: Device not responding to set address. [ 157.147724] usb 3-4: device not accepting address 69, error -71 [ 137.437158] Freezing remaining freezable tasks ... [ 157.439917] Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0): [ 157.439922] khubd D ffff880100214440 0 43 2 0x00000000 [ 157.439924] ffff880078f79ba0 0000000000000002 ffff880078d547d0 ffff880078f79fd8 [ 157.439926] 0000000000014440 0000000000014440 ffff880078d547d0 ffffffff81eb4dc0 [ 157.439928] ffff880078f79bd0 00000000ffff74ca ffffffff81eb4dc0 000000000000e118 [ 157.439930] Call Trace: [ 157.439936] [] schedule+0x29/0x70 [ 157.439938] [] schedule_timeout+0x175/0x2d0 [ 157.439941] [] ? usb_control_msg+0xd4/0x110 [ 157.439944] [] ? ftrace_raw_output_tick_stop+0x70/0x70 [ 157.439946] [] msleep+0x2f/0x40 [ 157.439947] [] hub_port_reset+0x1ba/0x570 [ 157.439949] [] hub_port_init+0x73/0xb10 [ 157.439951] [] ? update_autosuspend+0x39/0x60 [ 157.439953] [] ? pm_runtime_set_autosuspend_delay+0x45/0x90 [ 157.439955] [] hub_port_connect_change+0x185/0xb50 [ 157.439957] [] ? usb_control_msg+0xd4/0x110 [ 157.439958] [] hub_events+0x4c4/0xa20 [ 157.439960] [] hub_thread+0x35/0x160 [ 157.439963] [] ? prepare_to_wait_event+0x100/0x100 [ 157.439965] [] ? hub_events+0xa20/0xa20 [ 157.439967] [] kthread+0xd2/0xf0 [ 157.439969] [] ? kthread_create_on_node+0x1d0/0x1d0 [ 157.439972] [] ret_from_fork+0x7c/0xb0 [ 157.439973] [] ? kthread_create_on_node+0x1d0/0x1d0 [ 157.439996] [ 157.439996] Restarting kernel threads ... done. [ 157.440036] Restarting tasks ... done. [ 157.443721] usb 3-4: new high-speed USB device number 71 using xhci_hcd [ 157.443772] usb 3-4: Device not responding to set address. [ 157.648116] usb 3-4: Device not responding to set address. [ 157.671060] FWTS_RESUME [ 157.671094] Finished fwts resume [ 157.851713] usb 3-4: device not accepting address 71, error -71 [ 158.155770] usb 3-4: new high-speed USB device number 73 using xhci_hcd [ 158.155826] usb 3-4: Device not responding to set address. [ 158.359768] usb 3-4: Device not responding to set address. [ 158.563715] usb 3-4: device not accepting address 73, error -71 [ 158.859754] usb 3-4: new high-speed USB device number 75 using xhci_hcd [ 158.859829] usb 3-4: Device not responding to set address. [ 159.063723] usb 3-4: Device not responding to set address. [ 159.267697] usb 3-4: device not accepting address 75, error -71 [ 159.539693] ERROR @wl_inform_single_bss : cfg80211_inform_bss_frame error [ 159.563737] usb 3-4: new high-speed USB device number 77 using xhci_hcd [ 159.563812] usb 3-4: Device not responding to set address. [ 159.767682] usb 3-4: Device not responding to set address. [ 159.980407] usb 3-4: device not accepting address 77, error -71 [ 160.275685] usb 3-4: new high-speed USB device number 79 using xhci_hcd [ 160.275713] usb 3-4: Device not responding to set address. [ 160.479716] usb 3-4: Device not responding to set address. [ 160.683661] usb 3-4: device not accepting address 79, error -71 [ 160.980405] usb 3-4: new high-speed USB device number 81 using xhci_hcd [ 160.980430] usb 3-4: Device not responding to set address. [ 161.183631] usb 3-4: Device not responding to set address. [ 161.387642] usb 3-4: device not accepting address 81, error -71 [ 161.683656] usb 3-4: new high-speed USB device number 83 using xhci_hcd [ 161.683687] usb 3-4: Device not responding to set address. [ 161.887689] usb 3-4: Device not responding to set address. [ 162.091630] usb 3-4: device not accepting address 83, error -71 [ 162.387635] usb 3-4: new high-speed USB device number 85 using xhci_hcd [ 162.387663] usb 3-4: Device not responding to set address. [ 162.591611] usb 3-4: Device not responding to set address. [ 162.795607] usb 3-4: device not accepting address 85, error -71 [ 163.091589] usb 3-4: new high-speed USB device number 87 using xhci_hcd [ 163.091616] usb 3-4: Device not responding to set address. [ 163.295646] usb 3-4: Device not responding to set address. [ 163.499550] usb 3-4: device not accepting address 87, error -71 [ 163.795570] usb 3-4: new high-speed USB device number 89 using xhci_hcd [ 163.795595] usb 3-4: Device not responding to set address. [ 163.999662] usb 3-4: Device not responding to set address. [ 164.203573] usb 3-4: device not accepting address 89, error -71 [ 164.499581] usb 3-4: new high-speed USB device number 91 using xhci_hcd [ 164.499610] usb 3-4: Device not responding to set address. [ 164.703583] usb 3-4: Device not responding to set address. [ 164.907534] usb 3-4: device not accepting address 91, error -71 [ 165.251561] usb 3-4: new high-speed USB device number 93 using xhci_hcd [ 165.251589] usb 3-4: Device not responding to set address. [ 165.455591] usb 3-4: Device not responding to set address. [ 165.659534] usb 3-4: device not accepting address 93, error -71 [ 165.955542] usb 3-4: new high-speed USB device number 95 using xhci_hcd [ 165.955569] usb 3-4: Device not responding to set address. [ 166.159570] usb 3-4: Device not responding to set address. [ 166.363515] usb 3-4: device not accepting address 95, error -71 [ 166.659481] usb 3-4: new high-speed USB device number 97 using xhci_hcd [ 166.659511] usb 3-4: Device not responding to set address. [ 166.863513] usb 3-4: Device not responding to set address. [ 167.067464] usb 3-4: device not accepting address 97, error -71 [ 167.363523] usb 3-4: new high-speed USB device number 99 using xhci_hcd [ 167.363580] usb 3-4: Device not responding to set address. [ 167.567519] usb 3-4: Device not responding to set address. [ 167.771452] usb 3-4: device not accepting address 99, error -71 [ 168.067506] usb 3-4: new high-speed USB device number 101 using xhci_hcd [ 168.067578] usb 3-4: Device not responding to set address. [ 168.271463] usb 3-4: Device not responding to set address. [ 168.475464] usb 3-4: device not accepting address 101, error -71 [ 168.771503] usb 3-4: new high-speed USB device number 103 using xhci_hcd [ 168.771560] usb 3-4: Device not responding to set address. [ 168.975454] usb 3-4: Device not responding to set address. [ 169.179443] usb 3-4: device not accepting address 103, error -71 [ 169.475485] usb 3-4: new high-speed USB device number 105 using xhci_hcd [ 169.475540] usb 3-4: Device not responding to set address. [ 169.679430] usb 3-4: Device not responding to set address. [ 169.883406] usb 3-4: device not accepting address 105, error -71 [ 170.179467] usb 3-4: new high-speed USB device number 107 using xhci_hcd [ 170.179523] usb 3-4: Device not responding to set address. [ 170.383461] usb 3-4: Device not responding to set address. [ 170.587406] usb 3-4: device not accepting address 107, error -71 [ 170.883451] usb 3-4: new high-speed USB device number 109 using xhci_hcd [ 170.883508] usb 3-4: Device not responding to set address. [ 171.087397] usb 3-4: Device not responding to set address. [ 171.291358] usb 3-4: device not accepting address 109, error -71 [ 171.587375] usb 3-4: new high-speed USB device number 111 using xhci_hcd [ 171.587401] usb 3-4: Device not responding to set address. [ 171.791385] usb 3-4: Device not responding to set address. [ 171.995375] usb 3-4: device not accepting address 111, error -71 [ 172.291382] usb 3-4: new high-speed USB device number 113 using xhci_hcd [ 172.291413] usb 3-4: Device not responding to set address. [ 172.495414] usb 3-4: Device not responding to set address. [ 172.699342] usb 3-4: device not accepting address 113, error -71 [ 172.995346] usb 3-4: new high-speed USB device number 115 using xhci_hcd [ 172.995376] usb 3-4: Device not responding to set address. [ 173.199395] usb 3-4: Device not responding to set address. [ 173.403307] usb 3-4: device not accepting address 115, error -71 [ 173.699345] usb 3-4: new high-speed USB device number 117 using xhci_hcd [ 173.699401] usb 3-4: Device not responding to set address. [ 173.903317] usb 3-4: Device not responding to set address. [ 174.107320] usb 3-4: device not accepting address 117, error -71 [ 174.403313] usb 3-4: new high-speed USB device number 119 using xhci_hcd [ 174.403368] usb 3-4: Device not responding to set address. [ 174.607342] usb 3-4: Device not responding to set address. [ 174.811287] usb 3-4: device not accepting address 119, error -71 [ 175.107309] usb 3-4: new high-speed USB device number 121 using xhci_hcd [ 175.107337] usb 3-4: Device not responding to set address. [ 175.311363] usb 3-4: Device not responding to set address. [ 175.515284] usb 3-4: device not accepting address 121, error -71 [ 175.811326] usb 3-4: new high-speed USB device number 123 using xhci_hcd [ 175.811356] usb 3-4: Device not responding to set address. [ 176.015320] usb 3-4: Device not responding to set address. [ 176.219269] usb 3-4: device not accepting address 123, error -71 [ 176.515283] usb 3-4: new high-speed USB device number 125 using xhci_hcd [ 176.515339] usb 3-4: Device not responding to set address. [ 176.719283] usb 3-4: Device not responding to set address. [ 176.923211] usb 3-4: device not accepting address 125, error -71 [ 177.219281] usb 3-4: new high-speed USB device number 127 using xhci_hcd [ 177.219338] usb 3-4: Device not responding to set address. [ 177.423229] usb 3-4: Device not responding to set address. [ 177.627214] usb 3-4: device not accepting address 127, error -71 [ 177.923215] usb 3-4: new high-speed USB device number 4 using xhci_hcd [ 177.923243] usb 3-4: Device not responding to set address. [ 178.127225] usb 3-4: Device not responding to set address. [ 178.331197] usb 3-4: device not accepting address 4, error -71 [ 178.627235] usb 3-4: new high-speed USB device number 6 using xhci_hcd [ 178.627291] usb 3-4: Device not responding to set address. [ 178.831253] usb 3-4: Device not responding to set address. [ 179.035197] usb 3-4: device not accepting address 6, error -71 [ 179.331236] usb 3-4: new high-speed USB device number 8 using xhci_hcd [ 179.331295] usb 3-4: Device not responding to set address. [ 179.535186] usb 3-4: Device not responding to set address. [ 179.739157] usb 3-4: device not accepting address 8, error -71 [ 180.035216] usb 3-4: new high-speed USB device number 10 using xhci_hcd [ 180.035271] usb 3-4: Device not responding to set address. [ 180.239218] usb 3-4: Device not responding to set address. [ 180.443165] usb 3-4: device not accepting address 10, error -71 [ 180.739201] usb 3-4: new high-speed USB device number 12 using xhci_hcd [ 180.739256] usb 3-4: Device not responding to set address.