[ 0.000000] Linux version 2.6.24-1-generic (buildd@vernadsky) (gcc version 4.2.3 20071123 (prerelease) (Ubuntu 4.2.2-3ubuntu4)) #1 SMP Fri Dec 7 22:06:49 GMT 2007 (Ubuntu 2.6.24-1.2-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f681400 (usable) [ 0.000000] BIOS-e820: 000000003f681400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 259713) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259713 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259713 [ 0.000000] On node 0 totalpages: 259713 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 237 pages used for memmap [ 0.000000] HighMem zone: 30100 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC0C0 checksum 0 [ 0.000000] ACPI: RSDP 000FC0C0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3F6819CC, 0044 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: FACP 3F682800, 0074 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: DSDT 3F683400, 519E (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F691C00, 0040 [ 0.000000] ACPI: HPET 3F682F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 3F683000, 0068 (r1 DELL M07 27D70403 ASL 47) [ 0.000000] ACPI: ASF! 3F682C00, 005B (r16 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: MCFG 3F682FC0, 003E (r16 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: SLIC 3F68309C, 0176 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: TCPA 3F683300, 0032 (r1 DELL M07 27D70403 ASL 61) [ 0.000000] ACPI: SSDT 3F681A53, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257684 [ 0.000000] Kernel command line: root=UUID=9a78748e-761d-4bc4-985c-c57f0ad86673 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1830.924 MHz processor. [ 12.273011] Console: colour VGA+ 80x25 [ 12.273015] console [tty0] enabled [ 12.273268] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.273612] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.298225] Memory: 1017916k/1038852k available (2117k kernel code, 20248k reserved, 985k data, 364k init, 121348k highmem) [ 12.298232] virtual kernel memory layout: [ 12.298233] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 12.298234] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.298236] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.298237] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.298238] .init : 0xc040d000 - 0xc0468000 ( 364 kB) [ 12.298239] .data : 0xc031174d - 0xc0407d64 ( 985 kB) [ 12.298240] .text : 0xc0100000 - 0xc031174d (2117 kB) [ 12.298244] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.298276] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 12.298411] hpet clockevent registered [ 12.378376] Calibrating delay using timer specific routine.. 3665.89 BogoMIPS (lpj=7331782) [ 12.378394] Security Framework initialized [ 12.378401] SELinux: Disabled at boot. [ 12.378404] Capability LSM initialized [ 12.378416] Mount-cache hash table entries: 512 [ 12.378521] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 12.378530] monitor/mwait feature present. [ 12.378532] using mwait in idle threads. [ 12.378536] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.378538] CPU: L2 cache: 2048K [ 12.378541] CPU: Physical Processor ID: 0 [ 12.378542] CPU: Processor Core ID: 0 [ 12.378544] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 12.378552] Compat vDSO mapped to ffffe000. [ 12.378564] Checking 'hlt' instruction... OK. [ 12.394716] SMP alternatives: switching to UP code [ 12.396378] Early unpacking initramfs... done [ 12.722466] ACPI: Core revision 20070126 [ 12.722526] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 12.725420] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 12.725437] SMP alternatives: switching to SMP code [ 12.726065] Booting processor 1/1 eip 3000 [ 15.074871] Initializing CPU#1 [ 15.154401] Calibrating delay using timer specific routine.. 3661.82 BogoMIPS (lpj=7323652) [ 15.154409] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 15.154415] monitor/mwait feature present. [ 15.154418] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.154420] CPU: L2 cache: 2048K [ 15.154423] CPU: Physical Processor ID: 0 [ 15.154424] CPU: Processor Core ID: 1 [ 15.154426] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 12.818727] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 12.818752] Total of 2 processors activated (7327.71 BogoMIPS). [ 12.818946] ENABLING IO-APIC IRQs [ 12.819138] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 12.966172] checking TSC synchronization [CPU#0 -> CPU#1]: [ 12.986168] Measured 4279667755 cycles TSC warp between CPUs, turning off TSC clock. [ 12.986171] Marking TSC unstable due to: check_tsc_sync_source failed. [ 12.986184] Brought up 2 CPUs [ 12.986210] CPU0 attaching sched-domain: [ 12.986212] domain 0: span 03 [ 12.986214] groups: 01 02 [ 12.986217] CPU1 attaching sched-domain: [ 12.986219] domain 0: span 03 [ 12.986221] groups: 02 01 [ 15.322719] net_namespace: 64 bytes [ 15.322729] Booting paravirtualized kernel on bare hardware [ 15.323187] Time: 16:07:31 Date: 12/08/07 [ 15.323240] NET: Registered protocol family 16 [ 15.323438] EISA bus registered [ 15.323442] ACPI: bus type pci registered [ 15.351816] PCI: PCI BIOS revision 2.10 entry at 0xfacc6, last bus=12 [ 15.351819] PCI: Using configuration type 1 [ 15.351820] Setting up standard PCI resources [ 13.021033] ACPI: EC: Look up EC in DSDT [ 13.034691] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be A9 [20070126] [ 13.034697] ACPI: SSDT 3F681A10, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 13.034847] ACPI: Interpreter enabled [ 13.034850] ACPI: (supports S0 S3 S4 S5) [ 13.034863] ACPI: Using IOAPIC for interrupt routing [ 13.066614] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.067384] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 13.067389] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 13.068402] PCI: Transparent bridge - 0000:00:1e.0 [ 13.068534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.068963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 13.069109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.069222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.069335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 13.080298] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 13.080405] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 13.080509] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 13.080601] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 13.080707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 13.080814] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 13.080921] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 13.081030] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 13.081174] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.081205] pnp: PnP ACPI init [ 13.081212] ACPI: bus type pnp registered [ 13.096693] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096738] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096780] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096822] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096863] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096905] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096947] pnpacpi: exceeded the max number of mem resources: 12 [ 13.096990] pnpacpi: exceeded the max number of mem resources: 12 [ 13.126692] pnp: PnP ACPI: found 14 devices [ 13.126694] ACPI: ACPI bus type pnp unregistered [ 13.126697] PnPBIOS: Disabled by ACPI PNP [ 15.463162] PCI: Using ACPI for IRQ routing [ 15.463165] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.530334] NET: Registered protocol family 8 [ 15.530336] NET: Registered protocol family 20 [ 15.530370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 15.530374] hpet0: 3 64-bit timers, 14318180 Hz [ 13.197938] Time: hpet clocksource has been installed. [ 13.197953] Switched to high resolution mode on CPU 0 [ 15.534332] Switched to high resolution mode on CPU 1 [ 13.210929] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 13.210933] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 13.210935] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 13.210938] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 13.210941] system 00:00: iomem range 0x100000-0x3f6813ff could not be reserved [ 13.210944] system 00:00: iomem range 0x3f681400-0x3f6fffff could not be reserved [ 13.210947] system 00:00: iomem range 0x3f700000-0x3f7fffff could not be reserved [ 13.210951] system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved [ 13.210954] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 13.210957] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 13.210960] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 13.210963] system 00:00: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 13.210969] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 13.210972] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 13.210975] system 00:02: ioport range 0x1008-0x100f has been reserved [ 13.210981] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 13.210984] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 13.210987] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 13.210989] system 00:03: ioport range 0x1060-0x107f has been reserved [ 13.210992] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 13.210995] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 13.210998] system 00:03: ioport range 0x1010-0x102f has been reserved [ 13.211001] system 00:03: ioport range 0x809-0x809 has been reserved [ 13.211008] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 13.211011] system 00:08: ioport range 0xcc0-0xcff could not be reserved [ 13.211014] system 00:08: ioport range 0x910-0x91f has been reserved [ 13.211017] system 00:08: ioport range 0x920-0x92f has been reserved [ 13.211019] system 00:08: ioport range 0xcbc-0xcbf has been reserved [ 13.211022] system 00:08: ioport range 0x930-0x97f has been reserved [ 13.211029] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 13.211035] system 00:0d: ioport range 0xcb0-0xcbb has been reserved [ 13.211038] system 00:0d: iomem range 0xfed40000-0xfed44fff could not be reserved [ 13.241483] PCI: Bridge: 0000:00:1c.0 [ 13.241485] IO window: disabled. [ 13.241490] MEM window: disabled. [ 13.241494] PREFETCH window: disabled. [ 13.241500] PCI: Bridge: 0000:00:1c.1 [ 13.241502] IO window: disabled. [ 13.241507] MEM window: efd00000-efdfffff [ 13.241511] PREFETCH window: disabled. [ 13.241517] PCI: Bridge: 0000:00:1c.2 [ 13.241518] IO window: disabled. [ 13.241524] MEM window: efc00000-efcfffff [ 13.241528] PREFETCH window: disabled. [ 13.241542] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 13.241544] IO window: 00001400-000014ff [ 13.241549] IO window: 00001800-000018ff [ 13.241554] PREFETCH window: 50000000-53ffffff [ 13.241560] MEM window: 54000000-57ffffff [ 13.241564] PCI: Bridge: 0000:00:1e.0 [ 13.241566] IO window: disabled. [ 13.241571] MEM window: disabled. [ 13.241575] PREFETCH window: disabled. [ 13.241604] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.241611] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.241634] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.241640] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.241662] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.241668] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.241681] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.241698] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 13.241702] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 13.241718] NET: Registered protocol family 2 [ 13.285905] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.286115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.286786] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.287119] TCP: Hash tables configured (established 131072 bind 65536) [ 13.287122] TCP reno registered [ 13.297990] checking if image is initramfs... it is [ 13.945792] Freeing initrd memory: 7231k freed [ 13.946610] audit: initializing netlink socket (disabled) [ 13.946623] audit(1197130051.524:1): initialized [ 16.283083] highmem bounce pool size: 64 pages [ 16.285023] VFS: Disk quotas dquot_6.5.1 [ 13.948845] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 13.948992] AppArmor: Unable to register AppArmor [ 13.949057] io scheduler noop registered [ 13.949059] io scheduler anticipatory registered [ 13.949061] io scheduler deadline registered [ 13.949072] io scheduler cfq registered (default) [ 13.949098] Boot video device is 0000:00:02.0 [ 13.949302] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.949358] assign_interrupt_mode Found MSI capability [ 13.949406] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.949441] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.949554] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.949608] assign_interrupt_mode Found MSI capability [ 13.949652] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.949688] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.949789] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.949843] assign_interrupt_mode Found MSI capability [ 13.949887] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.949919] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.950112] isapnp: Scanning for PnP cards... [ 14.304229] isapnp: No Plug & Play device found [ 14.331213] Real Time Clock Driver v1.12ac [ 14.331362] hpet_resources: 0xfed00000 is busy [ 14.331417] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.331569] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 14.332265] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 14.333014] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.333081] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 14.333176] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.336725] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.336729] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.361318] mice: PS/2 mouse device common for all mice [ 14.361427] EISA: Probing bus 0 at eisa.0 [ 14.361430] EISA: Cannot allocate resource for mainboard [ 14.361432] Cannot allocate resource for EISA slot 1 [ 14.361463] EISA: Detected 0 cards. [ 14.361466] cpuidle: using governor ladder [ 14.361468] cpuidle: using governor menu [ 14.361543] TCP cubic registered [ 14.361551] NET: Registered protocol family 1 [ 14.361577] Using IPI No-Shortcut mode [ 14.361702] Magic number: 3:399:135 [ 14.361937] Freeing unused kernel memory: 364k freed [ 16.700574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 15.560205] fuse init (API version 7.9) [ 15.570563] ACPI: SSDT 3F68217A, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 15.570750] ACPI: SSDT 3F681F2F, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 15.571291] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 15.571296] ACPI: Processor [CPU0] (supports 8 throttling states) [ 15.571505] ACPI: SSDT 3F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 15.571676] ACPI: SSDT 3F6820F5, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 17.908561] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.908567] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.912512] ACPI: Thermal Zone [THM] (57 C) [ 15.932800] tg3.c:v3.86 (November 9, 2007) [ 15.932870] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 15.932882] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 15.953398] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:bd:5f:86 [ 15.953406] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 15.953409] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 16.004083] usbcore: registered new interface driver usbfs [ 16.004107] usbcore: registered new interface driver hub [ 16.004482] usbcore: registered new device driver usb [ 16.008804] USB Universal Host Controller Interface driver v3.0 [ 16.008867] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 16.008879] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.008884] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.009119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 16.009155] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 16.009310] usb usb1: configuration #1 chosen from 1 choice [ 16.009336] hub 1-0:1.0: USB hub found [ 16.009342] hub 1-0:1.0: 2 ports detected [ 18.357799] SCSI subsystem initialized [ 18.421543] libata version 3.00 loaded. [ 16.116361] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 16.116374] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.116379] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.116403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 16.116435] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 16.116543] usb usb2: configuration #1 chosen from 1 choice [ 16.116565] hub 2-0:1.0: USB hub found [ 16.116571] hub 2-0:1.0: 2 ports detected [ 16.220284] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 16.220295] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.220300] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.220323] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 16.220355] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 16.220465] usb usb3: configuration #1 chosen from 1 choice [ 16.220487] hub 3-0:1.0: USB hub found [ 16.220492] hub 3-0:1.0: 2 ports detected [ 16.324213] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 16.324225] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 16.324229] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 16.324253] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 16.324286] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 16.324392] usb usb4: configuration #1 chosen from 1 choice [ 16.324416] hub 4-0:1.0: USB hub found [ 16.324421] hub 4-0:1.0: 2 ports detected [ 16.356113] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 18.760465] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.760502] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 18.760515] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 16.424404] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 16.424416] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 16.424419] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.424443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 16.428352] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.428360] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 16.428367] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 18.817310] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.817424] usb usb5: configuration #1 chosen from 1 choice [ 18.817449] hub 5-0:1.0: USB hub found [ 18.817455] hub 5-0:1.0: 8 ports detected [ 19.021448] ata_piix 0000:00:1f.2: version 2.12 [ 19.021456] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 19.021478] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.021516] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.021875] scsi0 : ata_piix [ 19.022067] scsi1 : ata_piix [ 19.023152] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 19.023155] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 16.848364] ata1.00: ATA-8: FUJITSU MHW2060BH, 00850012, max UDMA/100 [ 16.848367] ata1.00: 117210240 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 16.875824] usb 1-2: device not accepting address 2, error -71 [ 16.876360] ata1.00: configured for UDMA/100 [ 19.532415] ata2.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 102C, max UDMA/33 [ 19.704263] ata2.00: configured for UDMA/33 [ 17.368162] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2060B 0085 PQ: 0 ANSI: 5 [ 17.369177] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5 [ 17.376600] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 17.376614] sd 0:0:0:0: [sda] Write Protect is off [ 17.376616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.376633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.376679] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 17.376689] sd 0:0:0:0: [sda] Write Protect is off [ 17.376691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.376708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.376711] sda: sda1 < sda5 sda6 sda7 sda8 sda9 > [ 17.452479] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.793110] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 19.793114] Uniform CD-ROM driver Revision: 3.20 [ 19.793167] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 17.457750] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.457767] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 17.579411] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 17.732600] usb 1-2: configuration #1 chosen from 1 choice [ 17.734455] hub 1-2:1.0: USB hub found [ 17.736424] hub 1-2:1.0: 4 ports detected [ 17.756617] Attempting manual resume [ 17.756620] swsusp: Resume From Partition 8:8 [ 17.756622] PM: Checking swsusp image. [ 17.756867] PM: Resume from disk failed. [ 17.763540] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 17.763549] ReiserFS: sda6: using ordered data mode [ 17.787037] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 17.787310] ReiserFS: sda6: checking transaction log (sda6) [ 18.064206] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 18.192228] usb 1-2.3: configuration #1 chosen from 1 choice [ 18.194160] hub 1-2.3:1.0: USB hub found [ 20.532392] hub 1-2.3:1.0: 3 ports detected [ 18.607937] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 6 [ 18.724973] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 29.688334] ReiserFS: sda6: replayed 455 transactions in 12 seconds [ 29.688939] ReiserFS: sda6: Using r5 hash to sort names [ 33.886903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.965990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.029559] Linux agpgart interface v0.102 [ 34.082532] agpgart: Detected an Intel 945GM Chipset. [ 34.083516] agpgart: Detected 7932K stolen memory. [ 34.099988] agpgart: AGP aperture is 256M @ 0xd0000000 [ 34.493795] input: Lid Switch as /devices/virtual/input/input2 [ 34.494319] ACPI: Lid Switch [LID] [ 34.494366] input: Power Button (CM) as /devices/virtual/input/input3 [ 34.513538] ACPI: Power Button (CM) [PBTN] [ 34.513615] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 34.549613] ACPI: Sleep Button (CM) [SBTN] [ 34.664670] ACPI: Battery Slot [BAT0] (battery present) [ 34.664727] ACPI: Battery Slot [BAT1] (battery absent) [ 34.706306] ACPI: AC Adapter [AC] (on-line) [ 34.811660] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input5 [ 34.841351] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 34.841916] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input6 [ 34.873314] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 34.873474] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input7 [ 34.905310] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 35.147785] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 35.147789] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 35.147936] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 35.147951] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 35.147974] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 37.817257] iTCO_vendor_support: vendor-support=0 [ 37.866483] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.866573] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 37.866609] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 37.898213] intel_rng: FWH not detected [ 36.320656] input: PS/2 Mouse as /devices/virtual/input/input8 [ 38.721013] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 36.766645] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2 [ 36.766650] iwl3945: Could not read microcode: -2 [ 36.766849] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 36.766863] iwl3945: probe of 0000:0c:00.0 failed with error -2 [ 36.766975] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2] [ 36.767000] Yenta O2: res at 0x94/0xD4: 00/ea [ 36.767002] Yenta O2: enabling read prefetch/write burst [ 36.767404] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 36.767419] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.893105] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 36.893110] Socket status: 30000006 [ 36.893113] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 37.207720] cs: IO port probe 0x100-0x3af: clean. [ 37.209734] cs: IO port probe 0x3e0-0x4ff: clean. [ 37.210530] cs: IO port probe 0x820-0x8ff: clean. [ 37.211208] cs: IO port probe 0xc00-0xcf7: clean. [ 37.211873] cs: IO port probe 0xa00-0xaff: clean. [ 37.314848] loop: module loaded [ 37.350263] lp: driver loaded but no devices found [ 39.770737] Adding 2096440k swap on /dev/sda8. Priority:-1 extents:1 across:2096440k [ 42.992908] ReiserFS: sda6: Removing [221 31061 0x0 SD]..done [ 42.993016] ReiserFS: sda6: Removing [221 26883 0x0 SD]..done [ 42.993329] ReiserFS: sda6: There were 2 uncompleted unlinks/truncates. Completed [ 43.075386] device-mapper: uevent: version 1.0.3 [ 43.075415] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 60.780047] kjournald starting. Commit interval 5 seconds [ 58.452042] EXT3 FS on sda5, internal journal [ 58.452047] EXT3-fs: mounted filesystem with ordered data mode. [ 58.472547] ReiserFS: sda9: found reiserfs format "3.6" with standard journal [ 58.472557] ReiserFS: sda9: using ordered data mode [ 58.481995] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 58.482250] ReiserFS: sda9: checking transaction log (sda9) [ 58.547141] ReiserFS: sda9: Using r5 hash to sort names [ 58.597705] ReiserFS: sda7: found reiserfs format "3.6" with standard journal [ 58.597712] ReiserFS: sda7: using ordered data mode [ 58.609138] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 58.609436] ReiserFS: sda7: checking transaction log (sda7) [ 58.632485] ReiserFS: sda7: Using r5 hash to sort names [ 62.200099] ACPI: ACPI Dock Station Driver [ 62.223611] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 62.264259] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 62.264265] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 62.264295] ACPI: Error installing bay notify handler [ 62.264299] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 65.473526] NET: Registered protocol family 10 [ 65.473747] lo: Disabled Privacy Extensions [ 65.474088] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.903743] ppdev: user-space parallel port driver [ 70.515135] Bluetooth: Core ver 2.11 [ 70.515222] NET: Registered protocol family 31 [ 70.515225] Bluetooth: HCI device and connection manager initialized [ 70.515232] Bluetooth: HCI socket layer initialized [ 70.585397] Bluetooth: L2CAP ver 2.9 [ 70.585406] Bluetooth: L2CAP socket layer initialized [ 70.665039] Bluetooth: RFCOMM socket layer initialized [ 70.665057] Bluetooth: RFCOMM TTY layer initialized [ 70.665060] Bluetooth: RFCOMM ver 1.8 [ 76.273546] [drm] Initialized drm 1.1.0 20060810 [ 76.416017] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 76.416104] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 139.604455] CPU0 attaching NULL sched-domain. [ 139.604465] CPU1 attaching NULL sched-domain. [ 139.628331] CPU0 attaching sched-domain: [ 139.628342] domain 0: span 03 [ 139.628345] groups: 01 02 [ 139.628351] CPU1 attaching sched-domain: [ 139.628355] domain 0: span 03 [ 139.628360] groups: 02 01 [ 146.289818] compiz.real[6040]: segfault at 00000000 eip b7f0b4f1 esp bf9c0c50 error 4