[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004f6d3400 (usable) [ 0.000000] BIOS-e820: 000000004f6d3400 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 374MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 325331) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 325331 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 325331 [ 0.000000] On node 0 totalpages: 325331 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 749 pages used for memmap [ 0.000000] HighMem zone: 95206 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC370 checksum 0 [ 0.000000] ACPI: RSDP 000FC370, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 4F6D3A96, 0038 (r1 DELL M07 27D60609 ASL 61) [ 0.000000] ACPI: FACP 4F6D4800, 0074 (r1 DELL M07 27D60609 ASL 61) [ 0.000000] ACPI: DSDT 4F6D5400, 39FD (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 4F6E3C00, 0040 [ 0.000000] ACPI: APIC 4F6D5000, 0068 (r1 DELL M07 27D60609 ASL 47) [ 0.000000] ACPI: MCFG 4F6D4FC0, 003E (r16 DELL M07 27D60609 ASL 61) [ 0.000000] ACPI: BOOT 4F6D4BC0, 0028 (r1 DELL M07 27D60609 ASL 61) [ 0.000000] ACPI: SSDT 4F6D3ACE, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322790 [ 0.000000] Kernel command line: root=UUID=c91344eb-652a-4a48-9de2-69c84efcc358 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1830.939 MHz processor. [ 8.140941] Console: colour VGA+ 80x25 [ 8.140947] console [tty0] enabled [ 8.141267] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 8.141833] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.225493] Memory: 1277276k/1301324k available (2157k kernel code, 22828k reserved, 998k data, 364k init, 383820k highmem) [ 8.225507] virtual kernel memory layout: [ 8.225509] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 8.225512] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.225514] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 8.225516] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 8.225518] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 8.225520] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 8.225523] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 8.225529] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.225592] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 8.305586] Calibrating delay using timer specific routine.. 3666.81 BogoMIPS (lpj=7333630) [ 8.305631] Security Framework initialized [ 8.305642] SELinux: Disabled at boot. [ 8.305666] AppArmor: AppArmor initialized [ 8.305673] Failure registering capabilities with primary security module. [ 8.305686] Mount-cache hash table entries: 512 [ 8.305888] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 8.305903] monitor/mwait feature present. [ 8.305906] using mwait in idle threads. [ 8.305913] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.305917] CPU: L2 cache: 2048K [ 8.305921] CPU: Physical Processor ID: 0 [ 8.305924] CPU: Processor Core ID: 0 [ 8.305928] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 8.305943] Compat vDSO mapped to ffffe000. [ 8.305963] Checking 'hlt' instruction... OK. [ 8.322207] SMP alternatives: switching to UP code [ 8.325146] Early unpacking initramfs... done [ 8.956847] ACPI: Core revision 20070126 [ 8.956932] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.960766] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 8.960792] SMP alternatives: switching to SMP code [ 8.961888] Booting processor 1/1 eip 3000 [ 11.023668] Initializing CPU#1 [ 11.102690] Calibrating delay using timer specific routine.. 3662.16 BogoMIPS (lpj=7324330) [ 11.102702] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 11.102712] monitor/mwait feature present. [ 11.102717] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.102720] CPU: L2 cache: 2048K [ 11.102724] CPU: Physical Processor ID: 0 [ 11.102726] CPU: Processor Core ID: 1 [ 11.102729] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 9.054095] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 9.054129] Total of 2 processors activated (7328.98 BogoMIPS). [ 9.054323] ENABLING IO-APIC IRQs [ 9.054539] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 9.201357] checking TSC synchronization [CPU#0 -> CPU#1]: [ 9.221360] Measured 3754283027 cycles TSC warp between CPUs, turning off TSC clock. [ 9.221365] Marking TSC unstable due to: check_tsc_sync_source failed. [ 9.221388] Brought up 2 CPUs [ 9.221425] CPU0 attaching sched-domain: [ 9.221430] domain 0: span 03 [ 9.221433] groups: 01 02 [ 9.221438] CPU1 attaching sched-domain: [ 9.221442] domain 0: span 03 [ 9.221444] groups: 02 01 [ 11.271298] net_namespace: 64 bytes [ 11.271314] Booting paravirtualized kernel on bare hardware [ 11.272118] Time: 11:11:49 Date: 04/13/08 [ 11.272167] NET: Registered protocol family 16 [ 11.272510] EISA bus registered [ 11.272518] ACPI: bus type pci registered [ 11.299768] PCI: PCI BIOS revision 2.10 entry at 0xfb4d6, last bus=13 [ 11.299772] PCI: Using configuration type 1 [ 11.299776] Setting up standard PCI resources [ 9.259037] ACPI: EC: Look up EC in DSDT [ 9.265879] ACPI: Interpreter enabled [ 9.265886] ACPI: (supports S0 S3 S4 S5) [ 9.265909] ACPI: Using IOAPIC for interrupt routing [ 9.286536] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.287566] Force enabled HPET at base address 0xfed00000 [ 9.287574] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 9.287581] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 9.288890] PCI: Transparent bridge - 0000:00:1e.0 [ 9.288934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.289718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 9.289942] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 9.290145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 9.304014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 9.304195] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 [ 9.304373] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 9.304549] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 9.304729] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 9.304910] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 9.305092] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 9.305281] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 9.305520] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.305573] pnp: PnP ACPI init [ 9.305586] ACPI: bus type pnp registered [ 9.331765] pnpacpi: exceeded the max number of mem resources: 12 [ 9.353423] pnp: PnP ACPI: found 11 devices [ 9.353428] ACPI: ACPI bus type pnp unregistered [ 9.353433] PnPBIOS: Disabled by ACPI PNP [ 11.403292] PCI: Using ACPI for IRQ routing [ 11.403298] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.482745] NET: Registered protocol family 8 [ 11.482748] NET: Registered protocol family 20 [ 11.482922] hpet clockevent registered [ 11.482931] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.482939] hpet0: 3 64-bit timers, 14318180 Hz [ 11.483994] AppArmor: AppArmor Filesystem Enabled [ 9.437071] Time: hpet clocksource has been installed. [ 9.437089] Switched to high resolution mode on CPU 0 [ 11.486739] Switched to high resolution mode on CPU 1 [ 9.450077] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 9.450083] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 9.450089] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 9.450094] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 9.450100] system 00:00: iomem range 0x100000-0x4f6d33ff could not be reserved [ 9.450105] system 00:00: iomem range 0x4f6d3400-0x4f6fffff could not be reserved [ 9.450111] system 00:00: iomem range 0x4f700000-0x4f7fffff could not be reserved [ 9.450116] system 00:00: iomem range 0x4f700000-0x4fefffff could not be reserved [ 9.450122] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 9.450128] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 9.450133] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 9.450139] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 9.450151] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 9.450156] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 9.450161] system 00:02: ioport range 0x1008-0x100f has been reserved [ 9.450172] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 9.450177] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 9.450182] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 9.450188] system 00:03: ioport range 0x1060-0x107f has been reserved [ 9.450193] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 9.450198] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 9.450203] system 00:03: ioport range 0x1010-0x102f has been reserved [ 9.450208] system 00:03: ioport range 0x809-0x809 has been reserved [ 9.450222] system 00:08: ioport range 0xc80-0xcff could not be reserved [ 9.450227] system 00:08: ioport range 0x910-0x91f has been reserved [ 9.450232] system 00:08: ioport range 0x920-0x92f has been reserved [ 9.450237] system 00:08: ioport range 0x930-0x97f has been reserved [ 9.480952] PCI: Bridge: 0000:00:1c.0 [ 9.480955] IO window: disabled. [ 9.480965] MEM window: dfd00000-dfdfffff [ 9.480971] PREFETCH window: disabled. [ 9.480979] PCI: Bridge: 0000:00:1c.3 [ 9.480991] IO window: d000-dfff [ 9.480999] MEM window: dfa00000-dfcfffff [ 9.481005] PREFETCH window: d0000000-d01fffff [ 9.481014] PCI: Bridge: 0000:00:1e.0 [ 9.481016] IO window: disabled. [ 9.481024] MEM window: df900000-df9fffff [ 9.481030] PREFETCH window: disabled. [ 9.481067] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 9.481079] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 9.481108] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 9.481117] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 9.481134] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.481153] NET: Registered protocol family 2 [ 9.529060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.529428] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 9.530684] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 9.531311] TCP: Hash tables configured (established 131072 bind 65536) [ 9.531315] TCP reno registered [ 9.541201] checking if image is initramfs... it is [ 10.796180] Freeing initrd memory: 7700k freed [ 10.796448] Simple Boot Flag at 0x79 set to 0x1 [ 12.847030] audit: initializing netlink socket (disabled) [ 12.847052] audit(1208085109.452:1): initialized [ 10.797910] highmem bounce pool size: 64 pages [ 10.801349] VFS: Disk quotas dquot_6.5.1 [ 10.801477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.801697] io scheduler noop registered [ 10.801701] io scheduler anticipatory registered [ 10.801704] io scheduler deadline registered [ 10.801725] io scheduler cfq registered (default) [ 10.801742] Boot video device is 0000:00:02.0 [ 10.802042] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.802111] assign_interrupt_mode Found MSI capability [ 10.802171] Allocate Port Service[0000:00:1c.0:pcie00] [ 10.802232] Allocate Port Service[0000:00:1c.0:pcie02] [ 10.802370] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 10.802438] assign_interrupt_mode Found MSI capability [ 10.802492] Allocate Port Service[0000:00:1c.3:pcie00] [ 10.802550] Allocate Port Service[0000:00:1c.3:pcie02] [ 10.802972] isapnp: Scanning for PnP cards... [ 11.157618] isapnp: No Plug & Play device found [ 13.254569] Real Time Clock Driver v1.12ac [ 13.254766] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.256735] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.256849] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 13.257012] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.210660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.210669] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.277731] mice: PS/2 mouse device common for all mice [ 13.277925] EISA: Probing bus 0 at eisa.0 [ 13.277936] Cannot allocate resource for EISA slot 1 [ 13.277975] EISA: Detected 0 cards. [ 13.277980] cpuidle: using governor ladder [ 13.277984] cpuidle: using governor menu [ 13.278129] NET: Registered protocol family 1 [ 13.278170] Using IPI No-Shortcut mode [ 13.278221] registered taskstats version 1 [ 13.278403] Magic number: 4:744:175 [ 13.278435] hash matches device ttyr1 [ 13.278526] hash matches device device:0b [ 13.278534] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 13.278538] EDD information not available. [ 13.278788] Freeing unused kernel memory: 364k freed [ 13.280247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 14.658376] fuse init (API version 7.9) [ 14.689950] ACPI: SSDT 4F6D41F5, 01AF (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 14.690259] ACPI: SSDT 4F6D3FAA, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 12.641715] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 12.641725] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.642108] ACPI: SSDT 4F6D43A4, 0090 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 12.642395] ACPI: SSDT 4F6D4170, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 14.692894] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.692903] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.700473] ACPI: Thermal Zone [THM] (25 C) [ 15.053658] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.053684] PCI: Setting latency timer of device 0000:0b:00.0 to 64 [ 15.113558] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0 [ 15.338683] usbcore: registered new interface driver usbfs [ 15.338721] usbcore: registered new interface driver hub [ 13.296591] usbcore: registered new device driver usb [ 13.298603] USB Universal Host Controller Interface driver v3.0 [ 13.298676] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 13.298693] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.298699] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.299010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 13.299054] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80 [ 13.299276] usb usb1: configuration #1 chosen from 1 choice [ 13.299315] hub 1-0:1.0: USB hub found [ 13.299324] hub 1-0:1.0: 2 ports detected [ 13.402894] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 13.402912] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 13.402919] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.402955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 13.402997] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60 [ 13.403187] usb usb2: configuration #1 chosen from 1 choice [ 13.403226] hub 2-0:1.0: USB hub found [ 13.403240] hub 2-0:1.0: 2 ports detected [ 15.488012] SCSI subsystem initialized [ 13.506829] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20 [ 13.506848] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 13.506855] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.506893] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 13.506934] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000bf40 [ 13.507116] usb usb3: configuration #1 chosen from 1 choice [ 13.507159] hub 3-0:1.0: USB hub found [ 13.507168] hub 3-0:1.0: 2 ports detected [ 15.596131] libata version 3.00 loaded. [ 13.610783] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21 [ 13.610801] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 13.610808] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 13.610848] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 13.610889] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000bf20 [ 13.611085] usb usb4: configuration #1 chosen from 1 choice [ 13.611126] hub 4-0:1.0: USB hub found [ 13.611135] hub 4-0:1.0: 2 ports detected [ 13.642634] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 15.764351] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 [ 15.764371] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.764378] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.764418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.768346] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.768355] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.768365] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80000 [ 15.821000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.821175] usb usb5: configuration #1 chosen from 1 choice [ 15.821217] hub 5-0:1.0: USB hub found [ 15.821226] hub 5-0:1.0: 8 ports detected [ 13.875646] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 13.928470] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 15.982917] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22 [ 16.044973] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 16.045022] b44.c:v2.0 [ 13.995590] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 22 [ 13.995643] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 13.995662] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 16.065334] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:a7:f0:19 [ 14.028108] ata_piix 0000:00:1f.2: version 2.12 [ 14.028118] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 14.028145] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 22 [ 14.028193] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.028629] scsi0 : ata_piix [ 14.028713] scsi1 : ata_piix [ 14.029978] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 14.029984] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 14.166298] usb 1-1: device not accepting address 2, error -71 [ 14.191153] ata1.00: failed to set max address (err_mask=0x1) [ 14.191161] ata1.00: device aborted resize (114270345 -> 117210240), skipping HPA handling [ 14.191171] ata1.00: ATA-7: Hitachi HTS541060G9SA00, MB3OC60R, max UDMA/100 [ 14.191178] ata1.00: 114270345 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 14.206633] ata1.00: configured for UDMA/100 [ 16.325535] Clocksource tsc unstable (delta = -155217553 ns) [ 16.343491] ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS2, max UDMA/33 [ 14.315426] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 16.374065] ata2.00: configured for UDMA/33 [ 14.324856] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54106 MB3O PQ: 0 ANSI: 5 [ 14.325688] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2 PQ: 0 ANSI: 5 [ 14.336521] Driver 'sd' needs updating - please use bus_type methods [ 14.336635] sd 0:0:0:0: [sda] 114270345 512-byte hardware sectors (58506 MB) [ 14.336656] sd 0:0:0:0: [sda] Write Protect is off [ 14.336661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.336690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.336764] sd 0:0:0:0: [sda] 114270345 512-byte hardware sectors (58506 MB) [ 14.336782] sd 0:0:0:0: [sda] Write Protect is off [ 14.336786] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.336815] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.336821] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 14.364653] sda1 sda2 sda3 [ 14.391401] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.446472] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 16.446479] Uniform CD-ROM driver Revision: 3.20 [ 16.446550] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 14.400786] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.400818] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 14.445581] usb 1-1: configuration #1 chosen from 1 choice [ 16.524973] usbcore: registered new interface driver hiddev [ 14.488957] input: KYE USB MOUSE as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2 [ 14.520004] input,hidraw0: USB HID v1.10 Mouse [KYE USB MOUSE] on usb-0000:00:1d.0-1 [ 14.520036] usbcore: registered new interface driver usbhid [ 14.520043] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 14.606610] Attempting manual resume [ 14.606616] swsusp: Resume From Partition 8:2 [ 14.606619] PM: Checking swsusp image. [ 14.606837] PM: Resume from disk failed. [ 16.712370] kjournald starting. Commit interval 5 seconds [ 14.662939] EXT3-fs: mounted filesystem with ordered data mode. [ 16.877664] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc000025b4d41] [ 27.614675] Linux agpgart interface v0.102 [ 27.644715] agpgart: Detected an Intel 945GM Chipset. [ 27.646495] agpgart: Detected 7932K stolen memory. [ 27.677107] agpgart: AGP aperture is 256M @ 0xc0000000 [ 27.699231] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 25.709785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 25.742603] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.789762] intel_rng: FWH not detected [ 25.886064] iTCO_vendor_support: vendor-support=0 [ 25.895790] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 [ 25.901229] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 25.931216] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [ 25.952255] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 25.952310] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.166633] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 26.470601] ACPI: AC Adapter [AC] (off-line) [ 26.590768] input: Lid Switch as /devices/virtual/input/input5 [ 26.613752] ACPI: Lid Switch [LID] [ 26.613870] input: Power Button (CM) as /devices/virtual/input/input6 [ 26.669188] ACPI: Power Button (CM) [PBTN] [ 26.669319] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 26.719787] ACPI: Sleep Button (CM) [SBTN] [ 26.757306] ACPI: Battery Slot [BAT0] (battery present) [ 29.155417] sdhci: Secure Digital Host Controller Interface driver [ 29.155424] sdhci: Copyright(c) Pierre Ossman [ 29.155516] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19) [ 29.155546] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 [ 29.155663] mmc0: SDHCI at 0xdf9fd400 irq 23 DMA [ 27.496673] ricoh-mmc: Ricoh MMC Controller disabling driver [ 27.496679] ricoh-mmc: Copyright(c) Philip Langdale [ 27.496783] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1) [ 27.496800] ricoh-mmc: Controller is now disabled. [ 27.965364] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input8 [ 28.020406] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 28.021384] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 28.044371] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 28.044610] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 28.076358] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 28.642015] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 [ 28.642049] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 28.766261] b43-phy0: Broadcom 4311 WLAN found [ 30.887086] phy0: Selected rate control algorithm 'simple' [ 30.492888] lp: driver loaded but no devices found [ 32.751228] Adding 2441872k swap on /dev/sda2. Priority:-1 extents:1 across:2441872k [ 30.745073] EXT3 FS on sda1, internal journal [ 30.967994] device-mapper: uevent: version 1.0.3 [ 30.968043] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 33.365731] kjournald starting. Commit interval 5 seconds [ 31.316619] EXT3 FS on sda3, internal journal [ 31.316627] EXT3-fs: mounted filesystem with ordered data mode. [ 32.063673] ip_tables: (C) 2000-2006 Netfilter Core Team [ 32.783099] RPC: Registered udp transport module. [ 32.783105] RPC: Registered tcp transport module. [ 33.226254] No dock devices found. [ 36.663300] [drm] Initialized drm 1.1.0 20060810 [ 36.666943] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.666956] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 36.667045] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 36.875606] apm: BIOS not found. [ 37.140224] ppdev: user-space parallel port driver [ 37.259118] audit(1208085137.935:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5484 profile="/usr/sbin/cupsd" namespace="default" [ 39.730184] Bluetooth: Core ver 2.11 [ 39.730329] NET: Registered protocol family 31 [ 39.730332] Bluetooth: HCI device and connection manager initialized [ 39.730339] Bluetooth: HCI socket layer initialized [ 39.730571] input: b43-phy0 as /devices/virtual/input/input11 [ 39.762676] Bluetooth: L2CAP ver 2.9 [ 39.762684] Bluetooth: L2CAP socket layer initialized [ 41.886044] Bluetooth: RFCOMM socket layer initialized [ 41.886057] Bluetooth: RFCOMM TTY layer initialized [ 41.886059] Bluetooth: RFCOMM ver 1.8 [ 43.185091] Registered led device: b43-phy0:tx [ 43.185541] Registered led device: b43-phy0:rx [ 43.185885] Registered led device: b43-phy0:radio [ 42.852131] NET: Registered protocol family 10 [ 42.852701] lo: Disabled Privacy Extensions [ 42.854429] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.855961] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 55.268834] rpcbind: server andreina not responding, timed out [ 96.145737] NET: Registered protocol family 17 [ 97.199506] wlan0: Initial auth_alg=0 [ 97.199516] wlan0: authenticate with AP 00:60:b3:d9:c2:06 [ 95.151453] wlan0: RX authentication from 00:60:b3:d9:c2:06 (alg=0 transaction=2 status=0) [ 95.151461] wlan0: authenticated [ 95.151466] wlan0: associate with AP 00:60:b3:d9:c2:06 [ 95.153388] wlan0: RX AssocResp from 00:60:b3:d9:c2:06 (capab=0x471 status=0 aid=1) [ 95.153394] wlan0: associated [ 95.153401] wlan0: switched to short barker preamble (BSSID=00:60:b3:d9:c2:06) [ 95.156705] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 105.358933] wlan0: no IPv6 routers present [ 121.621104] wlan0: no IPv6 routers present [ 146.150815] rpcbind: server andreina not responding, timed out [ 2902.761185] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2900.742535] usb 4-1: configuration #1 chosen from 1 choice [ 2900.854290] Linux video capture interface: v2.00 [ 2900.886929] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47 [ 2900.889197] usb 4-1: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x602E) [ 2900.978157] usb 4-1: OV7630 image sensor detected [ 2901.102100] usb 4-1: Initialization succeeded [ 2901.102172] usb 4-1: V4L2 device registered as /dev/video0 [ 2901.102177] usb 4-1: Optional device control through 'sysfs' interface disabled [ 2901.102208] usbcore: registered new interface driver sn9c102 [ 2901.208044] usbcore: registered new interface driver gspca [ 2901.208058] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered