[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-29-generic (buildd@brownie) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:02:19 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d910cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d910d000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Dell System XPS L321X/085X6F, BIOS A04 04/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [c00f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b8c000, 0x01b8cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34b1a000-0x36584fff] [ 0.000000] ACPI: RSDP 000f0120 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT daffe120 000094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP dafef000 0000F4 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DSDT daff2000 00955E (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS daf19000 000040 [ 0.000000] ACPI: SLIC daffd000 000176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT daffc000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! daff1000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: HPET dafee000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: APIC dafed000 000098 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: MCFG dafec000 00003C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT dafeb000 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT dafea000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI dafe9000 00003E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI dafe8000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT dafe7000 000055 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI dafe6000 000292 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT dafe5000 0002F2 (v01 DELL AoacTabl 00001000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3714MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b8d000, 0x01b8dfff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x1fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xd910cfff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x00000000-0x1fdfffff] [ 0.000000] On node 0 totalpages: 1019563 [ 0.000000] free_area_init_node: node 0, pgdat c1995100, node_mem_map f271a020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7429 pages used for memmap [ 0.000000] HighMem zone: 791312 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7c000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1017779 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-29-generic root=/dev/mapper/ubuntu--vg-root ro persistent quiet splash vt.handoff=7 linemodeset=0 video.allow_duplicates=1 drm.debug=6 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 9433080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0011fe00) [ 0.000000] Memory: 3991320K/4078252K available (6522K kernel code, 639K rwdata, 2756K rodata, 872K init, 924K bss, 86932K reserved, 3165244K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b2000 - 0xc1a8c000 ( 872 kB) [ 0.000000] .data : 0xc165ee72 - 0xc19b1d80 (3403 kB) [ 0.000000] .text : 0xc1000000 - 0xc165ee72 (6523 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f6c0a000 soft=f6c0c000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.461 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.92 BogoMIPS (lpj=6385844) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000053] AppArmor: AppArmor initialized [ 0.000054] Yama: becoming mindful. [ 0.000099] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000101] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000334] Initializing cgroup subsys memory [ 0.000340] Initializing cgroup subsys devices [ 0.000342] Initializing cgroup subsys freezer [ 0.000344] Initializing cgroup subsys blkio [ 0.000346] Initializing cgroup subsys perf_event [ 0.000349] Initializing cgroup subsys hugetlb [ 0.000387] Disabled fast string operations [ 0.000390] CPU: Physical Processor ID: 0 [ 0.000391] CPU: Processor Core ID: 0 [ 0.000396] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000396] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000399] mce: CPU supports 7 MCE banks [ 0.000409] CPU0: Thermal monitoring handled by SMI [ 0.000421] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000421] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000421] tlb_flushall_shift: 5 [ 0.000841] Freeing SMP alternatives memory: 32K (c1a8c000 - c1a94000) [ 0.002102] ACPI: Core revision 20131115 [ 0.008883] ACPI: All ACPI Tables successfully acquired [ 0.009297] ftrace: allocating 27749 entries in 55 pages [ 0.024679] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.025099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064758] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.064767] TSC deadline timer enabled [ 0.067540] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.067548] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.067550] ... version: 3 [ 0.067551] ... bit width: 48 [ 0.067553] ... generic registers: 4 [ 0.067554] ... value mask: 0000ffffffffffff [ 0.067555] ... max period: 0000ffffffffffff [ 0.067557] ... fixed-purpose events: 3 [ 0.067558] ... event mask: 000000070000000f [ 0.069364] CPU 1 irqstacks, hard=f6d30000 soft=f6d32000 [ 0.069366] x86: Booting SMP configuration: [ 0.079571] Initializing CPU#1 [ 0.080299] Disabled fast string operations [ 0.080314] CPU1: Thermal monitoring handled by SMI [ 0.082580] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.069367] .... node #0, CPUs: #1 [ 0.082688] CPU 2 irqstacks, hard=f6e0a000 soft=f6e0c000 [ 0.092980] Initializing CPU#2 [ 0.093718] Disabled fast string operations [ 0.093731] CPU2: Thermal monitoring handled by SMI [ 0.082690] #2 [ 0.095930] CPU 3 irqstacks, hard=f6e6e000 soft=f6e70000 [ 0.106222] Initializing CPU#3 [ 0.106960] Disabled fast string operations [ 0.106973] CPU3: Thermal monitoring handled by SMI [ 0.095934] #3 [ 0.109088] x86: Booted up 1 node, 4 CPUs [ 0.109093] smpboot: Total of 4 processors activated (12771.68 BogoMIPS) [ 0.112953] devtmpfs: initialized [ 0.113266] EVM: security.selinux [ 0.113268] EVM: security.SMACK64 [ 0.113269] EVM: security.ima [ 0.113270] EVM: security.capability [ 0.113418] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.114460] pinctrl core: initialized pinctrl subsystem [ 0.114538] regulator-dummy: no parameters [ 0.114574] RTC time: 8:11:30, date: 06/20/14 [ 0.114620] NET: Registered protocol family 16 [ 0.114849] EISA bus registered [ 0.114851] cpuidle: using governor ladder [ 0.114852] cpuidle: using governor menu [ 0.114980] ACPI: bus type PCI registered [ 0.114982] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.115065] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.115068] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.115070] PCI: Using MMCONFIG for extended config space [ 0.115071] PCI: Using configuration type 1 for base access [ 0.115299] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.115301] mtrr: probably your BIOS does not setup all CPUs. [ 0.115302] mtrr: corrected configuration. [ 0.116632] bio: create slab at 0 [ 0.116839] ACPI: Added _OSI(Module Device) [ 0.116841] ACPI: Added _OSI(Processor Device) [ 0.116843] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.116845] ACPI: Added _OSI(Processor Aggregator Device) [ 0.120492] ACPI: Executed 2 blocks of module-level executable AML code [ 0.133125] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.133621] ACPI: SSDT daee0798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.134098] ACPI: Dynamic OEM Table Load: [ 0.134101] ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.145396] ACPI: SSDT daee1a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.145911] ACPI: Dynamic OEM Table Load: [ 0.145913] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.157231] ACPI: SSDT daedfd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.157703] ACPI: Dynamic OEM Table Load: [ 0.157705] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.173133] ACPI: Interpreter enabled [ 0.173150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.173156] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.173171] ACPI: (supports S0 S3 S4 S5) [ 0.173173] ACPI: Using IOAPIC for interrupt routing [ 0.173208] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.173349] ACPI: No dock devices found. [ 0.180452] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.180458] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.180501] \_SB_.PCI0:_OSC invalid UUID [ 0.180502] _OSC request data:1 1f 0 [ 0.180507] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.181326] PCI host bridge to bus 0000:00 [ 0.181330] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.181332] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.181335] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.181337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.181339] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.181341] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.181352] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.181446] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.181460] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.181468] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.181474] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.181591] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.181617] pci 0000:00:16.0: reg 0x10: [mem 0xf0605000-0xf060500f 64bit] [ 0.181702] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.181797] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.181822] pci 0000:00:1a.0: reg 0x10: [mem 0xf060a000-0xf060a3ff] [ 0.181922] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.181981] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.182027] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.182047] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit] [ 0.182125] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.182210] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.182330] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.182383] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.182428] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.182559] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.182611] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.182658] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.182790] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.182842] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.182893] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.182918] pci 0000:00:1d.0: reg 0x10: [mem 0xf0609000-0xf06093ff] [ 0.183018] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.183075] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.183119] pci 0000:00:1f.0: [8086:1c4d] type 00 class 0x060100 [ 0.183306] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.183330] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.183340] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097] [ 0.183351] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.183361] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093] [ 0.183371] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.183382] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff] [ 0.183435] pci 0000:00:1f.2: PME# supported from D3hot [ 0.183508] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.183527] pci 0000:00:1f.3: reg 0x10: [mem 0xf0604000-0xf06040ff 64bit] [ 0.183552] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.183731] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.184039] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000 [ 0.184220] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.185013] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.185187] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.193239] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.193249] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.193495] pci 0000:03:00.0: [1b73:1009] type 00 class 0x0c0330 [ 0.193571] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf040ffff 64bit] [ 0.193626] pci 0000:03:00.0: reg 0x18: [mem 0xf0410000-0xf0410fff 64bit] [ 0.193683] pci 0000:03:00.0: reg 0x20: [mem 0xf0411000-0xf0411fff 64bit] [ 0.193927] pci 0000:03:00.0: supports D1 [ 0.193929] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.194007] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.201211] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.201219] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.201355] pci_bus 0000:00: on NUMA node 0 [ 0.201901] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.201973] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.202042] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.202111] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.202182] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.202252] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202320] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.202388] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.202716] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.202724] ACPI: \_SB_.PCI0: notify handler is installed [ 0.202774] Found 1 acpi root devices [ 0.202847] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.202964] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202967] vgaarb: loaded [ 0.202969] vgaarb: bridge control possible 0000:00:02.0 [ 0.203230] SCSI subsystem initialized [ 0.203288] libata version 3.00 loaded. [ 0.203317] ACPI: bus type USB registered [ 0.203338] usbcore: registered new interface driver usbfs [ 0.203350] usbcore: registered new interface driver hub [ 0.203377] usbcore: registered new device driver usb [ 0.203522] PCI: Using ACPI for IRQ routing [ 0.205231] PCI: pci_cache_line_size set to 64 bytes [ 0.205434] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.205436] e820: reserve RAM buffer [mem 0xd910d000-0xdbffffff] [ 0.205438] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.205440] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.205540] NetLabel: Initializing [ 0.205542] NetLabel: domain hash size = 128 [ 0.205543] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.205560] NetLabel: unlabeled traffic allowed by default [ 0.205720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.205727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.207758] Switched to clocksource hpet [ 0.214390] AppArmor: AppArmor Filesystem Enabled [ 0.214417] pnp: PnP ACPI init [ 0.214429] ACPI: bus type PNP registered [ 0.214468] pnp 00:00: [dma 4] [ 0.214496] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.214605] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.214643] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.214699] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.214702] system 00:03: [io 0x1000-0x1003] has been reserved [ 0.214704] system 00:03: [io 0x1004-0x1013] has been reserved [ 0.214706] system 00:03: [io 0xffff] has been reserved [ 0.214709] system 00:03: [io 0x0400-0x0453] could not be reserved [ 0.214712] system 00:03: [io 0x0458-0x047f] has been reserved [ 0.214714] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.214717] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.214720] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214751] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.214809] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.214812] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.214888] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.214941] pnp 00:07: Plug and Play ACPI device, IDs DLL052e PNP0f13 (active) [ 0.215138] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.215141] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.215144] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.215146] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.215149] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.215151] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.215154] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.215156] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.215159] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.215162] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.215165] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215401] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved [ 0.215404] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved [ 0.215406] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.215419] pnp: PnP ACPI: found 10 devices [ 0.215421] ACPI: bus type PNP unregistered [ 0.215424] PnPBIOS: Disabled by ACPI PNP [ 0.252092] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.252111] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.252119] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.252131] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.252139] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.252153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.252155] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.252158] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252160] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.252162] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.252165] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.252167] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.252203] NET: Registered protocol family 2 [ 0.252397] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.252411] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.252427] TCP: Hash tables configured (established 8192 bind 8192) [ 0.252443] TCP: reno registered [ 0.252445] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.252450] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.252516] NET: Registered protocol family 1 [ 0.252528] pci 0000:00:02.0: Boot video device [ 0.253295] PCI: CLS 64 bytes, default 64 [ 0.253341] Trying to unpack rootfs image as initramfs... [ 0.844903] Freeing initrd memory: 27052K (f4b1a000 - f6585000) [ 0.845290] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 0.845297] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 0.845304] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 0.845313] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 0.845372] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.845374] Scanning for low memory corruption every 60 seconds [ 0.845760] Initialise system trusted keyring [ 0.845804] audit: initializing netlink socket (disabled) [ 0.845819] type=2000 audit(1403251890.836:1): initialized [ 0.871169] bounce pool size: 64 pages [ 0.871180] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.872743] zbud: loaded [ 0.872812] VFS: Disk quotas dquot_6.5.2 [ 0.872865] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.873372] fuse init (API version 7.22) [ 0.873464] msgmni has been set to 1666 [ 0.873529] Key type big_key registered [ 0.873992] Key type asymmetric registered [ 0.873994] Asymmetric key parser 'x509' registered [ 0.874033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.874075] io scheduler noop registered [ 0.874078] io scheduler deadline registered (default) [ 0.874110] io scheduler cfq registered [ 0.874585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.874606] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.874653] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.874654] vesafb: scrolling: redraw [ 0.874657] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.874810] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 3072k, total 3072k [ 0.938369] Console: switching to colour frame buffer device 128x48 [ 1.001863] fb0: VESA VGA frame buffer device [ 1.001887] intel_idle: MWAIT substates: 0x21120 [ 1.001889] intel_idle: v0.4 model 0x2A [ 1.001890] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.002020] ipmi message handler version 39.2 [ 1.207092] ACPI: AC Adapter [ADP0] (on-line) [ 1.207182] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.207187] ACPI: Power Button [PWRB] [ 1.207226] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.207229] ACPI: Sleep Button [SLPB] [ 1.207271] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.207893] ACPI: Lid Switch [LID0] [ 1.207935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.207938] ACPI: Power Button [PWRF] [ 1.208381] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.208384] ACPI: Thermal Zone [TZ00] (75 C) [ 1.208634] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.208636] ACPI: Thermal Zone [TZ01] (75 C) [ 1.208668] GHES: HEST is not enabled! [ 1.208736] isapnp: Scanning for PnP cards... [ 1.208810] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.213146] Linux agpgart interface v0.103 [ 1.214871] brd: module loaded [ 1.215749] loop: module loaded [ 1.216290] libphy: Fixed MDIO Bus: probed [ 1.216428] tun: Universal TUN/TAP device driver, 1.6 [ 1.216430] tun: (C) 1999-2004 Max Krasnyansky [ 1.216489] PPP generic driver version 2.4.2 [ 1.216558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.216562] ehci-pci: EHCI PCI platform driver [ 1.216675] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.216681] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.216697] ehci-pci 0000:00:1a.0: debug port 2 [ 1.218373] ACPI: Battery Slot [BAT0] (battery present) [ 1.220599] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.220620] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf060a000 [ 1.231053] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.231097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.231099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231102] usb usb1: Product: EHCI Host Controller [ 1.231104] usb usb1: Manufacturer: Linux 3.13.0-29-generic ehci_hcd [ 1.231105] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.231235] hub 1-0:1.0: USB hub found [ 1.231243] hub 1-0:1.0: 2 ports detected [ 1.231433] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.231438] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.231453] ehci-pci 0000:00:1d.0: debug port 2 [ 1.235358] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.235377] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0609000 [ 1.247041] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.247082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.247084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.247086] usb usb2: Product: EHCI Host Controller [ 1.247088] usb usb2: Manufacturer: Linux 3.13.0-29-generic ehci_hcd [ 1.247090] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.247210] hub 2-0:1.0: USB hub found [ 1.247217] hub 2-0:1.0: 2 ports detected [ 1.247313] ehci-platform: EHCI generic platform driver [ 1.247323] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247324] ohci-pci: OHCI PCI platform driver [ 1.247335] ohci-platform: OHCI generic platform driver [ 1.247344] uhci_hcd: USB Universal Host Controller Interface driver [ 1.247540] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.247545] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 1.247931] xhci_hcd 0000:03:00.0: irq 40 for MSI/MSI-X [ 1.247941] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.247948] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.247954] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 1.247961] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 1.248186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.248189] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.248191] usb usb3: Product: xHCI Host Controller [ 1.248193] usb usb3: Manufacturer: Linux 3.13.0-29-generic xhci_hcd [ 1.248195] usb usb3: SerialNumber: 0000:03:00.0 [ 1.248307] hub 3-0:1.0: USB hub found [ 1.248402] hub 3-0:1.0: 2 ports detected [ 1.248512] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.248515] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 1.248590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.248592] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.248594] usb usb4: Product: xHCI Host Controller [ 1.248596] usb usb4: Manufacturer: Linux 3.13.0-29-generic xhci_hcd [ 1.248598] usb usb4: SerialNumber: 0000:03:00.0 [ 1.248703] hub 4-0:1.0: USB hub found [ 1.248798] hub 4-0:1.0: 2 ports detected [ 1.363047] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.366598] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.366603] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.366754] mousedev: PS/2 mouse device common for all mice [ 1.367011] rtc_cmos 00:04: RTC can wake from S4 [ 1.367154] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.367184] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.367268] device-mapper: uevent: version 1.0.3 [ 1.367341] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.367361] platform eisa.0: Probing EISA bus 0 [ 1.367364] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.367366] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.367369] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.367371] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.367374] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.367376] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.367379] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.367381] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.367384] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.367386] platform eisa.0: EISA: Detected 0 cards [ 1.367391] cpufreq-nforce2: No nForce2 chipset. [ 1.367397] ledtrig-cpu: registered to indicate activity on CPUs [ 1.367557] TCP: cubic registered [ 1.367661] NET: Registered protocol family 10 [ 1.367874] NET: Registered protocol family 17 [ 1.367890] Key type dns_resolver registered [ 1.368155] Using IPI No-Shortcut mode [ 1.368273] Loading compiled-in X.509 certificates [ 1.372234] Loaded X.509 cert 'Magrathea: Glacier signing key: 497ec33ede6aa573c29cd85a3d778ac2aeb3d36f' [ 1.372244] registered taskstats version 1 [ 1.374747] Key type trusted registered [ 1.374865] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.376983] Key type encrypted registered [ 1.379008] AppArmor: AppArmor sha1 policy hashing enabled [ 1.379012] IMA: No TPM chip found, activating TPM-bypass! [ 1.379454] regulator-dummy: disabling [ 1.379502] Magic number: 2:964:169 [ 1.379578] rtc_cmos 00:04: setting system clock to 2014-06-20 08:11:31 UTC (1403251891) [ 1.380199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.380200] EDD information not available. [ 1.380246] PM: Hibernation image not present or could not be loaded. [ 1.519267] isapnp: No Plug & Play device found [ 1.519606] Freeing unused kernel memory: 872K (c19b2000 - c1a8c000) [ 1.519677] Write protecting the kernel text: 6524k [ 1.519776] Write protecting the kernel read-only data: 2764k [ 1.519778] NX-protecting the kernel data: 5764k [ 1.535358] systemd-udevd[111]: starting version 204 [ 1.543151] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.559939] wmi: Mapper loaded [ 1.574123] ahci 0000:00:1f.2: version 3.0 [ 1.574291] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.574357] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.574360] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.575125] [drm] Initialized drm 1.1.0 20060810 [ 1.575304] scsi0 : ahci [ 1.575433] scsi1 : ahci [ 1.575548] scsi2 : ahci [ 1.575653] scsi3 : ahci [ 1.575755] scsi4 : ahci [ 1.575858] scsi5 : ahci [ 1.575927] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 45 [ 1.575930] ata2: DUMMY [ 1.575932] ata3: DUMMY [ 1.575934] ata4: DUMMY [ 1.575936] ata5: DUMMY [ 1.575938] ata6: DUMMY [ 1.616719] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0116 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc, [ 1.616836] [drm:intel_detect_pch], Found CougarPoint PCH [ 1.616982] [drm] Memory usable by graphics device = 2048M [ 1.616984] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.616986] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 1.616989] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.616991] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 1.617005] Console: switching to colour dummy device 80x25 [ 1.617333] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaf15018 [ 1.617341] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.617342] [drm:intel_opregion_setup], SWSCI supported [ 1.638776] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 [ 1.638780] [drm:intel_opregion_setup], ASLE supported [ 1.638820] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 1.638830] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.638832] [drm] Driver supports precise vblank timestamp query. [ 1.638833] [drm:init_vbt_defaults], Set default to SSC at 120MHz [ 1.638837] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 1.638839] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.638842] [drm:parse_general_definitions], crt_ddc_bus_pin: 0 [ 1.638845] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.638847] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71010 1366 1414 1446 1498 768 769 773 790 0x8 0xa [ 1.638851] [drm:parse_lfp_panel_data], VBT initial LVDS value 200300 [ 1.638854] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.638855] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.638859] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.638862] [drm:parse_mipi], No MIPI BDB found [ 1.638867] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.638873] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000 [ 1.638912] [drm] applying no-PCH_PWM_ENABLE quirk [ 1.638915] [drm:intel_print_wm_latency], Primary WM0 latency 7 (0.7 usec) [ 1.638917] [drm:intel_print_wm_latency], Primary WM1 latency 3 (1.5 usec) [ 1.638919] [drm:intel_print_wm_latency], Primary WM2 latency 4 (2.0 usec) [ 1.638921] [drm:intel_print_wm_latency], Primary WM3 latency 22 (11.0 usec) [ 1.638923] [drm:intel_print_wm_latency], Sprite WM0 latency 7 (0.7 usec) [ 1.638925] [drm:intel_print_wm_latency], Sprite WM1 latency 3 (1.5 usec) [ 1.638927] [drm:intel_print_wm_latency], Sprite WM2 latency 4 (2.0 usec) [ 1.638929] [drm:intel_print_wm_latency], Sprite WM3 latency 22 (11.0 usec) [ 1.638931] [drm:intel_print_wm_latency], Cursor WM0 latency 7 (0.7 usec) [ 1.638932] [drm:intel_print_wm_latency], Cursor WM1 latency 3 (1.5 usec) [ 1.638934] [drm:intel_print_wm_latency], Cursor WM2 latency 4 (2.0 usec) [ 1.638936] [drm:intel_print_wm_latency], Cursor WM3 latency 22 (11.0 usec) [ 1.638939] [drm:intel_modeset_init], 2 display pipes available. [ 1.638956] [drm:intel_shared_dpll_init], 2 shared PLLs initialized [ 1.638960] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.652031] [drm:intel_lvds_init], using preferred mode from EDID: [ 1.652036] [drm:drm_mode_debug_printmodeline], Modeline 10:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 1.652048] [drm:intel_lvds_init], detected single-link lvds configuration [ 1.652108] [drm:intel_panel_get_backlight], get backlight PWM = 0 [ 1.652114] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 1.652278] [drm:intel_dp_init_connector], Adding DP connector on port C [ 1.652332] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.654828] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f [ 1.654837] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.657289] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f [ 1.657297] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.657346] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0 [ 1.657350] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 1.657757] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 1.660538] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.666760] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 1.666771] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.666872] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.666976] [drm:create_default_context], Default HW context loaded [ 1.666978] [drm:i915_gem_context_init], HW context support initialized [ 1.667006] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1.667009] [drm] This can cause pipe underruns and display issues. [ 1.667010] [drm] Please upgrade your BIOS to fix this. [ 1.667017] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 1.667030] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.667032] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 1.667039] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1 [ 1.667044] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0 [ 1.667050] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: enabled, pipe A [ 1.667054] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe A [ 1.667058] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A [ 1.667062] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 1.667067] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: enabled [ 1.667071] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled [ 1.667076] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled [ 1.667080] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled [ 1.667084] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.667086] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.667088] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0 [ 1.667090] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 1240989, gmch_n: 8388608, link_m: 137887, link_n: 524288, tu: 64 [ 1.667094] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.667096] [drm:intel_dump_pipe_config], requested mode: [ 1.667099] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0 [ 1.667103] [drm:intel_dump_pipe_config], adjusted mode: [ 1.667104] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9 [ 1.667108] [drm:intel_dump_crtc_timings], crtc timings: 70714 1366 1414 1446 1498 768 769 773 790, type: 0x0 flags: 0x9 [ 1.667112] [drm:intel_dump_pipe_config], port clock: 70714 [ 1.667114] [drm:intel_dump_pipe_config], pipe src size: 1024x768 [ 1.667116] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.667119] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled [ 1.667121] [drm:intel_dump_pipe_config], ips: 0 [ 1.667123] [drm:intel_dump_pipe_config], double wide: 0 [ 1.667126] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 1.667128] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.667130] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.667132] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.667135] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.667138] [drm:intel_dump_pipe_config], requested mode: [ 1.667140] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.667144] [drm:intel_dump_pipe_config], adjusted mode: [ 1.667145] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.667149] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.667152] [drm:intel_dump_pipe_config], port clock: 0 [ 1.667154] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.667156] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.667159] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.667161] [drm:intel_dump_pipe_config], ips: 0 [ 1.667163] [drm:intel_dump_pipe_config], double wide: 0 [ 1.667168] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 1.667174] [drm:check_encoder_state], [ENCODER:8:LVDS-8] [ 1.667178] [drm:check_encoder_state], [ENCODER:15:DAC-15] [ 1.667182] [drm:check_encoder_state], [ENCODER:16:TMDS-16] [ 1.667186] [drm:check_encoder_state], [ENCODER:20:TMDS-20] [ 1.667189] [drm:check_crtc_state], [CRTC:3] [ 1.667203] [drm:check_crtc_state], [CRTC:5] [ 1.667206] [drm:check_shared_dpll_state], PCH DPLL A [ 1.667211] [drm:check_shared_dpll_state], PCH DPLL B [ 1.667226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 1.667229] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 1.667241] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 1.667244] [drm:drm_mode_debug_printmodeline], Modeline 10:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 1.667248] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 40 47340 1366 1414 1446 1498 768 769 773 790 0x40 0x9 [ 1.667253] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 1.667255] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1 [ 1.667259] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 1.675094] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.675097] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.675377] hub 1-1:1.0: USB hub found [ 1.675463] hub 1-1:1.0: 6 ports detected [ 1.682817] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 1.682832] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.738786] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 1.754697] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.754702] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.754705] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 1.754709] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 1.754712] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 1.754915] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.754920] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.754923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 1.754927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] [ 1.754930] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 1.754935] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected [ 1.754939] [drm:drm_setup_crtcs], [ 1.754942] [drm:drm_enable_connectors], connector 7 enabled? yes [ 1.754944] [drm:drm_enable_connectors], connector 14 enabled? no [ 1.754947] [drm:drm_enable_connectors], connector 17 enabled? no [ 1.754949] [drm:drm_enable_connectors], connector 21 enabled? no [ 1.754952] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 1.754954] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 1.754957] [drm:drm_target_preferred], found mode 1366x768 [ 1.754960] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.754963] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 1.754967] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000 [ 1.754971] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072 [ 1.758142] [drm:intelfb_create], allocated 1366x768 fb: 0x00072000, bo f6f95400 [ 1.758228] fbcon: inteldrmfb (fb0) is primary device [ 1.758286] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 1.758288] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.758290] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.758294] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.758298] [drm:drm_mode_debug_printmodeline], Modeline 22:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 1.758301] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.758304] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 1.758307] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.758312] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains [ 1.758314] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18 [ 1.758320] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1 [ 1.758322] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 [ 1.758325] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.758326] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.758328] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 [ 1.758331] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 2481979, gmch_n: 4194304, link_m: 137887, link_n: 524288, tu: 64 [ 1.758333] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.758334] [drm:intel_dump_pipe_config], requested mode: [ 1.758338] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 1.758339] [drm:intel_dump_pipe_config], adjusted mode: [ 1.758343] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 1.758347] [drm:intel_dump_crtc_timings], crtc timings: 71010 1366 1414 1446 1498 768 769 773 790, type: 0x48 flags: 0x9 [ 1.758348] [drm:intel_dump_pipe_config], port clock: 71010 [ 1.758350] [drm:intel_dump_pipe_config], pipe src size: 1366x768 [ 1.758352] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.758354] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.758355] [drm:intel_dump_pipe_config], ips: 0 [ 1.758357] [drm:intel_dump_pipe_config], double wide: 0 [ 1.758360] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 1.787726] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.842690] tsc: Refined TSC clocksource calibration: 1596.376 MHz [ 1.894675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.895275] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 128GB, CXM12D1Q, max UDMA/133 [ 1.895277] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.895679] ata1.00: configured for UDMA/133 [ 1.895908] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5 [ 1.896102] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.896171] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.896256] sd 0:0:0:0: [sda] Write Protect is off [ 1.896258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.896295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.897075] sda: sda1 sda2 < sda5 > [ 1.897457] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.918953] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.918958] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.919361] hub 2-1:1.0: USB hub found [ 1.919427] hub 2-1:1.0: 8 ports detected [ 2.086616] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 2.106517] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3 [ 2.106533] [drm:intel_disable_shared_dpll], disabling PCH DPLL A [ 2.106942] [drm:intel_update_fbc], no output, disabling [ 2.106948] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz [ 2.106975] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A [ 2.106977] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A [ 2.106978] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A [ 2.106979] [drm:intel_get_shared_dpll], setting up PCH DPLL A [ 2.106992] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 5504 [ 2.106996] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1366x768] [ 2.107602] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 2.107604] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 2.107606] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 2.107609] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 2.109595] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0003 [ 2.109597] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.109598] usb 3-1: Product: Usb Mouse [ 2.109600] usb 3-1: Manufacturer: SIGMACHIP [ 2.109793] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.118601] hidraw: raw HID events driver (C) Jiri Kosina [ 2.127553] usbcore: registered new interface driver usbhid [ 2.127554] usbhid: USB HID core driver [ 2.132553] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:03:00.0/usb3/3-1/3-1:1.0/input/input7 [ 2.132981] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:03:00.0-1/input0 [ 2.170485] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.182650] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 2.234406] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.235218] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 2.235220] [drm:gen6_fdi_link_train], FDI train 1 done. [ 2.235870] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 2.235872] [drm:gen6_fdi_link_train], FDI train 2 done. [ 2.235873] [drm:gen6_fdi_link_train], FDI train done. [ 2.235877] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3 [ 2.235878] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A [ 2.237238] [drm:intel_update_fbc], disabled per chip default [ 2.546186] [drm:intel_panel_enable_backlight], pipe A [ 2.546192] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 2.546197] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4882 [ 2.558087] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=288f [ 2.558092] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.558126] usb 1-1.5: Product: Laptop_Integrated_Webcam_1.3M [ 2.558129] usb 1-1.5: Manufacturer: CN01RH717248721ED4TYA00 [ 2.562175] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1] [ 2.562187] [drm:check_encoder_state], [ENCODER:8:LVDS-8] [ 2.562192] [drm:check_encoder_state], [ENCODER:15:DAC-15] [ 2.562197] [drm:check_encoder_state], [ENCODER:16:TMDS-16] [ 2.562201] [drm:check_encoder_state], [ENCODER:20:TMDS-20] [ 2.562205] [drm:check_crtc_state], [CRTC:3] [ 2.562232] [drm:check_crtc_state], [CRTC:5] [ 2.562234] [drm:check_shared_dpll_state], PCH DPLL A [ 2.562238] [drm:check_shared_dpll_state], PCH DPLL B [ 2.562243] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 2.562249] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.562251] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.562256] Console: switching to colour frame buffer device 170x48 [ 2.562265] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.562267] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.562269] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.566173] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.566175] i915 0000:00:02.0: registered panic notifier [ 2.610932] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.613670] acpi device:1f: registered as cooling_device4 [ 2.613783] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 2.613890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.779305] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.779308] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.779310] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.822276] [drm:intel_print_rc6_info], Sandybridge: deep RC6 disabled [ 2.822280] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.839827] [drm:i915_gem_open], [ 2.839844] [drm:intel_crtc_cursor_set], cursor off [ 2.839847] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.839851] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.839854] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.839856] [drm:intel_crtc_cursor_set], cursor off [ 2.839858] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 2.839859] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.839862] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.839870] [drm:i915_gem_open], [ 2.839876] [drm:intel_crtc_cursor_set], cursor off [ 2.839877] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.839880] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.839882] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.839883] [drm:intel_crtc_cursor_set], cursor off [ 2.839885] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 2.839886] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.839888] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.839894] [drm:i915_gem_open], [ 2.839932] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 2.839935] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 2.839943] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 2.839946] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 2.839948] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 2.839958] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 2.839960] [drm:drm_mode_debug_printmodeline], Modeline 10:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 2.839963] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 40 47340 1366 1414 1446 1498 768 769 773 790 0x40 0x9 [ 2.839967] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 2.842009] Switched to clocksource tsc [ 2.845029] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 2.845035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 2.845038] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1 [ 2.845042] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 2.845044] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.846039] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 2.857906] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.857909] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.857911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 2.857934] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 2.857936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 2.857938] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1 [ 2.857942] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 2.857944] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.873896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.873899] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.873901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 2.873919] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 2.873924] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 2.873928] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 2.874133] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.874137] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.874139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 2.874145] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 2.874147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 2.874149] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 2.874340] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.874347] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.874352] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 2.874367] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 2.874373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] [ 2.874378] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 2.874385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected [ 2.874391] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 2.874432] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] [ 2.874434] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 2.874438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected [ 2.874459] [drm:drm_mode_addfb], [FB:24] [ 2.926692] [drm:drm_mode_addfb], [FB:24] [ 2.926731] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.926734] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.926736] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.931041] [drm:drm_mode_setcrtc], [CRTC:3] [ 2.931047] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 2.931049] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0) [ 2.931052] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 2.931055] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.934905] [drm:ironlake_update_plane], Writing base 0047A000 00000000 0 0 5504 [ 2.939455] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0610 [ 2.939459] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.939461] usb 2-1.2: Product: USB2.0 Hub [ 2.939848] hub 2-1.2:1.0: USB hub found [ 2.940188] hub 2-1.2:1.0: 4 ports detected [ 2.944686] [drm:drm_mode_setcrtc], [CRTC:3] [ 2.944696] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1] [ 2.944700] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0) [ 2.944705] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.944708] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3] [ 2.988115] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 [ 3.014224] usb 2-1.5: new full-speed USB device number 4 using ehci-pci [ 3.110839] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 3.110851] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.214080] usb 2-1.2.1: new high-speed USB device number 5 using ehci-pci [ 3.307784] usb 2-1.2.1: New USB device found, idVendor=05e3, idProduct=0610 [ 3.307796] usb 2-1.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.307802] usb 2-1.2.1: Product: USB2.0 Hub [ 3.308388] hub 2-1.2.1:1.0: USB hub found [ 3.308749] hub 2-1.2.1:1.0: 4 ports detected [ 3.381960] usb 2-1.2.2: new high-speed USB device number 6 using ehci-pci [ 3.603598] usb 2-1.2.2: New USB device found, idVendor=046d, idProduct=0990 [ 3.603610] usb 2-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 3.603617] usb 2-1.2.2: SerialNumber: 327AE51E [ 3.677750] usb 2-1.2.1.1: new high-speed USB device number 7 using ehci-pci [ 3.782730] usb 2-1.2.1.1: New USB device found, idVendor=0b95, idProduct=772a [ 3.782742] usb 2-1.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.782748] usb 2-1.2.1.1: Product: DAD [ 3.782754] usb 2-1.2.1.1: Manufacturer: Bizlink Corp. [ 3.782766] usb 2-1.2.1.1: SerialNumber: 04ED71 [ 3.853774] usb 2-1.2.1.2: new full-speed USB device number 8 using ehci-pci [ 3.948039] usb 2-1.2.1.2: New USB device found, idVendor=05f3, idProduct=0081 [ 3.948051] usb 2-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.948058] usb 2-1.2.1.2: Product: Kinesis Keyboard Hub [ 3.948063] usb 2-1.2.1.2: Manufacturer: PI Engineering [ 3.948543] hub 2-1.2.1.2:1.0: USB hub found [ 3.948931] hub 2-1.2.1.2:1.0: 4 ports detected [ 4.222288] usb 2-1.2.1.2.2: new full-speed USB device number 9 using ehci-pci [ 4.324584] usb 2-1.2.1.2.2: New USB device found, idVendor=05f3, idProduct=0007 [ 4.324590] usb 2-1.2.1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.329329] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.2/2-1.2.1.2.2/2-1.2.1.2.2:1.0/input/input9 [ 4.329505] hid-generic 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1d.0-1.2.1.2.2/input0 [ 4.342811] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.2/2-1.2.1.2.2/2-1.2.1.2.2:1.1/input/input10 [ 4.343025] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.0-1.2.1.2.2/input1 [ 7.446163] random: cryptsetup urandom read with 76 bits of entropy available [ 7.451611] bio: create slab at 1 [ 7.634680] bio: create slab at 1 [ 7.715227] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 7.919366] random: nonblocking pool is initialized [ 7.990320] Adding 4079612k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:4079612k SSFS [ 7.995470] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 8.109688] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 8.111712] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 8.137376] systemd-udevd[440]: starting version 204 [ 8.239224] lp: driver loaded but no devices found [ 8.256458] ppdev: user-space parallel port driver [ 8.357164] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 8.357175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.357181] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 8.357187] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20131115/utaddress-251) [ 8.357192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.357195] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 8.357200] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20131115/utaddress-251) [ 8.357206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.357208] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 8.357213] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20131115/utaddress-251) [ 8.357219] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.357221] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.397452] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 8.552441] cfg80211: Calling CRDA to update world regulatory domain [ 8.553238] Bluetooth: Core ver 2.17 [ 8.554242] NET: Registered protocol family 31 [ 8.554246] Bluetooth: HCI device and connection manager initialized [ 8.554256] Bluetooth: HCI socket layer initialized [ 8.554261] Bluetooth: L2CAP socket layer initialized [ 8.554269] Bluetooth: SCO socket layer initialized [ 8.602419] usbcore: registered new interface driver btusb [ 8.607536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.607540] Bluetooth: BNEP filters: protocol multicast [ 8.607548] Bluetooth: BNEP socket layer initialized [ 8.611706] type=1400 audit(1403251898.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=613 comm="apparmor_parser" [ 8.611717] type=1400 audit(1403251898.731:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=613 comm="apparmor_parser" [ 8.612185] Bluetooth: RFCOMM TTY layer initialized [ 8.612198] Bluetooth: RFCOMM socket layer initialized [ 8.612206] Bluetooth: RFCOMM ver 1.11 [ 8.612555] type=1400 audit(1403251898.731:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=613 comm="apparmor_parser" [ 8.614405] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 8.614408] Copyright(c) 2003-2013 Intel Corporation [ 8.616519] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 8.617121] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X [ 8.631597] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 8.632872] init: cups main process (641) killed by HUP signal [ 8.632889] init: cups main process ended, respawning [ 8.746434] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 8.746440] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 8.746443] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 8.746447] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 8.746575] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 8.762334] Linux video capture interface: v2.00 [ 8.774976] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 8.803936] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (1bcf:288f) [ 8.805898] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 8.884604] SKU: Nid=0x1d sku_cfg=0x4015822d [ 8.884609] SKU: port_connectivity=0x1 [ 8.884611] SKU: enable_pcbeep=0x1 [ 8.884613] SKU: check_sum=0x00000005 [ 8.884615] SKU: customization=0x00000082 [ 8.884617] SKU: external_amp=0x5 [ 8.884618] SKU: platform_type=0x1 [ 8.884620] SKU: swap=0x0 [ 8.884622] SKU: override=0x1 [ 8.884695] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11 [ 8.884992] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 8.884996] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.884999] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 8.885001] mono: mono_out=0x0 [ 8.885003] inputs: [ 8.885006] Mic=0x18 [ 8.885008] Internal Mic=0x12 [ 8.885011] realtek: No valid SSID, checking pincfg 0x4015822d for NID 0x1d [ 8.885014] realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0275 [ 8.901963] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.923158] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 8.923275] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.923378] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.946269] type=1400 audit(1403251899.067:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=703 comm="apparmor_parser" [ 8.946281] type=1400 audit(1403251899.067:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser" [ 8.946289] type=1400 audit(1403251899.067:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 8.947140] type=1400 audit(1403251899.067:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser" [ 8.947153] type=1400 audit(1403251899.067:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 8.947812] type=1400 audit(1403251899.067:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 9.019324] input: Dell WMI hotkeys as /devices/virtual/input/input15 [ 9.054695] usb_audio: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 9.054701] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1<6>[ 9.054948] usbcore: registered new interface driver snd-usb-audio [ 9.055124] uvcvideo: Found UVC 1.00 device (046d:0990) [ 9.072897] cfg80211: World regulatory domain updated: [ 9.072902] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.072905] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.072908] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.072911] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.072914] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.072916] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.074453] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/input/input16 [ 9.074640] usbcore: registered new interface driver uvcvideo [ 9.074643] USB Video Class driver (1.1.1) [ 9.105691] systemd-udevd[505]: renamed network interface wlan0 to wlan1 [ 9.116667] asix 2-1.2.1.1:1.0 eth0: register 'asix' at usb-0000:00:1d.0-1.2.1.1, ASIX AX88772 USB 2.0 Ethernet, 9c:eb:e8:05:b6:3c [ 9.116745] usbcore: registered new interface driver asix [ 9.167787] init: failsafe main process (769) killed by TERM signal [ 9.267135] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0 [ 9.267152] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 9.267157] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event. [ 9.267160] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event. [ 9.267164] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 9.267329] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.267335] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.267340] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 9.267628] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 9.268584] [drm:intel_dp_probe_oui], Sink OUI: 000000 [ 9.268765] [drm:intel_dp_probe_oui], Branch OUI: 0080e1 [ 9.276089] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.421105] type=1400 audit(1403251899.539:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=975 comm="apparmor_parser" [ 9.456775] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.456784] [drm:intel_hpd_irq_event], [CONNECTOR:21:DP-1] status updated from disconnected to connected [ 9.626614] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1 [ 9.626642] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 9.626647] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event. [ 9.626650] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event. [ 9.626654] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 9.626820] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.626824] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.626828] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 9.627134] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 9.627746] [drm:intel_dp_probe_oui], Sink OUI: 000000 [ 9.627922] [drm:intel_dp_probe_oui], Branch OUI: 0080e1 [ 9.633885] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.797788] [drm:i915_gem_open], [ 9.804719] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.804737] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 9.804748] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4] [ 9.804772] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 9.804777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] [ 9.804780] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1] [ 9.804796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes : [ 9.804799] [drm:drm_mode_debug_printmodeline], Modeline 10:"1366x768" 60 71010 1366 1414 1446 1498 768 769 773 790 0x48 0x9 [ 9.804804] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 40 47340 1366 1414 1446 1498 768 769 773 790 0x40 0x9 [ 9.804811] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 9.804824] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 9.804828] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 9.804831] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1 [ 9.804835] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 9.804838] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.817007] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 9.817013] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.817016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 9.817073] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 9.817077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] [ 9.817080] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1 [ 9.817084] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 9.817087] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.832983] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 9.832988] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.832992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected [ 9.833103] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 9.833107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 9.833111] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 9.833276] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.833280] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.833283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 9.833289] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 9.833292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] [ 9.833295] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1] [ 9.833453] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.833457] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.833460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected [ 9.833467] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.833471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] [ 9.833474] [drm:intel_dp_detect], [CONNECTOR:21:DP-1] [ 9.833757] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 9.834372] [drm:intel_dp_probe_oui], Sink OUI: 000000 [ 9.834546] [drm:intel_dp_probe_oui], Branch OUI: 0080e1 [ 9.844932] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 9.860178] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 9.866876] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0