/proc/cpuinfo: =========================================================== processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 33 model name : Dual Core AMD Opteron(tm) Processor 280 stepping : 2 cpu MHz : 2411.151 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy bogomips : 4825.16 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 33 model name : Dual Core AMD Opteron(tm) Processor 280 stepping : 2 cpu MHz : 2411.151 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy bogomips : 4822.56 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp processor : 2 vendor_id : AuthenticAMD cpu family : 15 model : 33 model name : Dual Core AMD Opteron(tm) Processor 280 stepping : 2 cpu MHz : 2411.151 cache size : 1024 KB physical id : 1 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy bogomips : 4822.57 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp processor : 3 vendor_id : AuthenticAMD cpu family : 15 model : 33 model name : Dual Core AMD Opteron(tm) Processor 280 stepping : 2 cpu MHz : 2411.151 cache size : 1024 KB physical id : 1 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy bogomips : 4822.46 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp =========================================================== dmesg: =========================================================== [ 0.000000] Linux version 2.6.22.1-custom (root@murray.imgen.bcm.tmc.edu) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #3 SMP Tue Jul 31 22:58:43 CDT 2007 [ 0.000000] Command line: root=/dev/md0 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff99000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff99000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000080000000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524288, 851840) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 3 entries of 3200 used [ 0.000000] end_pfn_map = 2293760 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7040, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 7FF95407, 0038 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FF98D72, 0074 (r1 NVIDIA CK8S 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7FF9543F, 3933 (r1 NVIDIA CK8 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FF99FC0, 0040 [ 0.000000] ACPI: SRAT 7FF98DE6, 0110 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SPCR 7FF98EF6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: APIC 7FF98F46, 0092 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FF98FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-d0000000 [ 0.000000] Entering add_active_range(0, 0, 155) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524288, 851840) 2 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-130000000 [ 0.000000] Entering add_active_range(0, 0, 155) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524176) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524288, 851840) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 3 entries of 3200 used [ 0.000000] SRAT: Node 1 PXM 1 130000000-230000000 [ 0.000000] Entering add_active_range(1, 1245184, 2293760) 4 entries of 3200 used [ 0.000000] NUMA: Using 28 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 1 0000000130000000-0000000230000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2293760 [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 524176 [ 0.000000] 0: 524288 -> 851840 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] 1: 1245184 -> 2293760 [ 0.000000] On node 0 totalpages: 1048235 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1215 pages reserved [ 0.000000] DMA zone: 2724 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833352 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 0 pages used for memmap [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xdf200000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, address 0xdf200000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xdf201000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, address 0xdf201000, GSI 28-31 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at ea000000 (gap: e8000000:16c00000) [ 0.000000] PERCPU: Allocating 41064 bytes of per cpu data [ 0.000000] Built 2 zonelists. Total pages: 2064236 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 43.261922] time.c: Detected 2411.151 MHz processor. [ 43.263499] Console: colour VGA+ 80x25 [ 43.263518] Checking aperture... [ 43.263520] CPU 0: aperture @ da000000 size 32 MB [ 43.263522] Aperture too small (32 MB) [ 43.266282] No AGP bridge found [ 43.266284] Your BIOS doesn't leave a aperture memory hole [ 43.266285] Please enable the IOMMU option in the BIOS setup [ 43.266286] This costs you 64 MB of RAM [ 43.295739] Mapping aperture over 65536 KB of RAM @ 4000000 [ 43.372896] Memory: 8184636k/9175040k available (2491k kernel code, 202608k reserved, 1028k data, 348k init) [ 43.451614] Calibrating delay using timer specific routine.. 4825.16 BogoMIPS (lpj=9650339) [ 43.451670] Security Framework v1.0.0 initialized [ 43.451674] SELinux: Disabled at boot. [ 43.452271] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 43.457242] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 43.459583] Mount-cache hash table entries: 256 [ 43.459721] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 43.459723] CPU: L2 Cache: 1024K (64 bytes/line) [ 43.459725] CPU 0/0 -> Node 0 [ 43.459726] CPU: Physical Processor ID: 0 [ 43.459727] CPU: Processor Core ID: 0 [ 43.459741] Freeing SMP alternatives: 26k freed [ 43.459979] ACPI: Core revision 20070126 [ 43.502133] Using local APIC timer interrupts. [ 43.543542] result 12558065 [ 43.543543] Detected 12.558 MHz APIC timer. [ 43.547591] Booting processor 1/4 APIC 0x1 [ 43.557663] Initializing CPU#1 [ 43.635318] Calibrating delay using timer specific routine.. 4822.56 BogoMIPS (lpj=9645133) [ 43.635323] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 43.635325] CPU: L2 Cache: 1024K (64 bytes/line) [ 43.635327] CPU 1/1 -> Node 0 [ 43.635328] CPU: Physical Processor ID: 0 [ 43.635330] CPU: Processor Core ID: 1 [ 43.635430] Dual Core AMD Opteron(tm) Processor 280 stepping 02 [ 43.639480] Booting processor 2/4 APIC 0x2 [ 43.649557] Initializing CPU#2 [ 43.727171] Calibrating delay using timer specific routine.. 4822.57 BogoMIPS (lpj=9645142) [ 43.727177] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 43.727179] CPU: L2 Cache: 1024K (64 bytes/line) [ 43.727182] CPU 2/2 -> Node 1 [ 43.727184] CPU: Physical Processor ID: 1 [ 43.727185] CPU: Processor Core ID: 0 [ 43.727300] Dual Core AMD Opteron(tm) Processor 280 stepping 02 [ 43.731329] Booting processor 3/4 APIC 0x3 [ 43.741407] Initializing CPU#3 [ 43.819025] Calibrating delay using timer specific routine.. 4822.46 BogoMIPS (lpj=9644937) [ 43.819032] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 43.819034] CPU: L2 Cache: 1024K (64 bytes/line) [ 43.819036] CPU 3/3 -> Node 1 [ 43.819038] CPU: Physical Processor ID: 1 [ 43.819039] CPU: Processor Core ID: 1 [ 43.819155] Dual Core AMD Opteron(tm) Processor 280 stepping 02 [ 43.823062] Brought up 4 CPUs [ 44.598989] migration_cost=339,806 [ 44.599277] NET: Registered protocol family 16 [ 44.599361] ACPI: bus type pci registered [ 44.599369] PCI: Using configuration type 1 [ 44.601523] ACPI: Interpreter enabled [ 44.601525] ACPI: Using IOAPIC for interrupt routing [ 44.606788] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 44.606795] PCI: Probing PCI hardware (bus 00) [ 44.607368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 44.607448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 44.607464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 44.620277] ACPI: PCI Root Bridge [PCI2] (0000:08) [ 44.620283] PCI: Probing PCI hardware (bus 08) [ 44.620565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] [ 44.620646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] [ 44.621259] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 [ 44.621383] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 [ 44.621504] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 [ 44.621624] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. [ 44.621747] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. [ 44.621867] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. [ 44.621988] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 [ 44.622109] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 [ 44.622228] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 44.622349] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 44.622468] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. [ 44.622591] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 44.622716] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 [ 44.622841] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0 [ 44.622965] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 44.623035] Linux Plug and Play Support v0.97 (c) Adam Belay [ 44.623045] pnp: PnP ACPI init [ 44.623051] ACPI: bus type pnp registered [ 44.625180] pnp: PnP ACPI: found 11 devices [ 44.625181] ACPI: ACPI bus type pnp unregistered [ 44.625301] SCSI subsystem initialized [ 44.625373] libata version 2.21 loaded. [ 44.625401] PCI: Using ACPI for IRQ routing [ 44.625403] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 44.625456] NET: Registered protocol family 8 [ 44.625458] NET: Registered protocol family 20 [ 44.625520] PCI-DMA: Disabling AGP. [ 44.625995] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 44.625999] PCI-DMA: using GART IOMMU. [ 44.626004] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 44.626352] pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 44.626355] pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 44.626359] pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 44.626362] pnp: 00:00: iomem range 0xfefff000-0xfeffffff has been reserved [ 44.626375] pnp: 00:04: ioport range 0x8000-0x807f has been reserved [ 44.626378] pnp: 00:04: ioport range 0x8080-0x80ff has been reserved [ 44.626380] pnp: 00:04: ioport range 0x8400-0x847f has been reserved [ 44.626383] pnp: 00:04: ioport range 0x8480-0x84ff has been reserved [ 44.626385] pnp: 00:04: ioport range 0x8800-0x887f has been reserved [ 44.626387] pnp: 00:04: ioport range 0x8880-0x88ff has been reserved [ 44.626390] pnp: 00:04: ioport range 0x5000-0x503f has been reserved [ 44.626392] pnp: 00:04: ioport range 0x5040-0x507f has been reserved [ 44.626714] PCI: Bridge: 0000:00:09.0 [ 44.626717] IO window: 2000-2fff [ 44.626719] MEM window: dd100000-deffffff [ 44.626721] PREFETCH window: ea000000-ea0fffff [ 44.626724] PCI: Bridge: 0000:00:0e.0 [ 44.626725] IO window: disabled. [ 44.626727] MEM window: disabled. [ 44.626728] PREFETCH window: disabled. [ 44.626734] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 44.626741] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 44.626745] PCI: Bridge: 0000:08:0a.0 [ 44.626746] IO window: disabled. [ 44.626748] MEM window: disabled. [ 44.626750] PREFETCH window: disabled. [ 44.626754] PCI: Bridge: 0000:08:0b.0 [ 44.626755] IO window: disabled. [ 44.626758] MEM window: df300000-df3fffff [ 44.626760] PREFETCH window: ea100000-ea1fffff [ 44.626868] NET: Registered protocol family 2 [ 44.629737] Time: acpi_pm clocksource has been installed. [ 44.669930] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 44.672728] TCP established hash table entries: 1048576 (order: 12, 25165824 bytes) [ 44.687078] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 44.687631] TCP: Hash tables configured (established 1048576 bind 65536) [ 44.687634] TCP reno registered [ 44.697742] checking if image is initramfs... it is [ 45.100100] Freeing initrd memory: 6313k freed [ 45.103389] Simple Boot Flag at 0x36 set to 0x1 [ 45.104522] audit: initializing netlink socket (disabled) [ 45.104537] audit(1185941301.808:1): initialized [ 45.104784] VFS: Disk quotas dquot_6.5.1 [ 45.104797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 45.104861] io scheduler noop registered [ 45.104862] io scheduler anticipatory registered [ 45.104864] io scheduler deadline registered (default) [ 45.104881] io scheduler cfq registered [ 45.325050] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 45.325061] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 45.325070] Boot video device is 0000:01:07.0 [ 45.325072] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:08:0a.0 subordinate bus. [ 45.325076] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:08:0b.0 subordinate bus. [ 45.325282] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 45.325299] assign_interrupt_mode Found MSI capability [ 45.325315] Allocate Port Service[0000:00:0e.0:pcie00] [ 45.347384] Real Time Clock Driver v1.12ac [ 45.347477] Linux agpgart interface v0.102 (c) Dave Jones [ 45.347479] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 45.348678] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 45.348758] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 45.348761] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 45.349009] sata_nv 0000:00:07.0: version 3.4 [ 45.349272] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 45.349280] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 45.349283] sata_nv 0000:00:07.0: Using ADMA mode [ 45.349634] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 45.349756] scsi0 : sata_nv [ 45.349870] scsi1 : sata_nv [ 45.349910] ata1: SATA max UDMA/133 cmd 0xffffc20000c0e480 ctl 0xffffc20000c0e4a0 bmdma 0x0000000000011410 irq 23 [ 45.349914] ata2: SATA max UDMA/133 cmd 0xffffc20000c0e580 ctl 0xffffc20000c0e5a0 bmdma 0x0000000000011418 irq 23 [ 45.819758] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.831944] ata1.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100 [ 45.831949] ata1.00: 625142448 sectors, multi 16: LBA48 [ 45.855882] ata1.00: configured for UDMA/100 [ 46.326928] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 46.339083] ata2.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100 [ 46.339085] ata2.00: 625142448 sectors, multi 16: LBA48 [ 46.363061] ata2.00: configured for UDMA/100 [ 46.363121] scsi 0:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5 [ 46.363126] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 46.363219] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 46.363227] sd 0:0:0:0: [sda] Write Protect is off [ 46.363229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 46.363240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.363279] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 46.363285] sd 0:0:0:0: [sda] Write Protect is off [ 46.363287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 46.363297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.363300] sda: sda1 [ 46.377707] sd 0:0:0:0: [sda] Attached SCSI disk [ 46.377777] scsi 1:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5 [ 46.377781] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 46.377860] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 46.377866] sd 1:0:0:0: [sdb] Write Protect is off [ 46.377868] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 46.377878] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.377900] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 46.377906] sd 1:0:0:0: [sdb] Write Protect is off [ 46.377908] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 46.377918] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.377920] sdb: sdb1 [ 46.394245] sd 1:0:0:0: [sdb] Attached SCSI disk [ 46.394542] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22 [ 46.394549] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 22 (level, high) -> IRQ 22 [ 46.394553] sata_nv 0000:00:08.0: Using ADMA mode [ 46.394770] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 46.394875] scsi2 : sata_nv [ 46.394986] scsi3 : sata_nv [ 46.395029] ata3: SATA max UDMA/133 cmd 0xffffc20002732480 ctl 0xffffc200027324a0 bmdma 0x0000000000011420 irq 22 [ 46.395033] ata4: SATA max UDMA/133 cmd 0xffffc20002732580 ctl 0xffffc200027325a0 bmdma 0x0000000000011428 irq 22 [ 46.710293] ata3: SATA link down (SStatus 0 SControl 300) [ 47.021774] ata4: SATA link down (SStatus 0 SControl 300) [ 47.021890] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 47.277684] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 47.277787] mice: PS/2 mouse device common for all mice [ 47.277830] md: linear personality registered for level -1 [ 47.277832] md: raid0 personality registered for level 0 [ 47.277834] md: raid1 personality registered for level 1 [ 47.277836] md: multipath personality registered for level -4 [ 47.277910] TCP cubic registered [ 47.277921] NET: Registered protocol family 1 [ 47.278095] Freeing unused kernel memory: 348k freed [ 47.442443] vga16fb: initializing [ 47.442448] vga16fb: mapped to 0xffff8100000a0000 [ 47.442500] fb0: VGA16 VGA frame buffer device [ 47.698333] Probing IDE interface ide0... [ 48.267756] Probing IDE interface ide1... [ 48.764589] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 48.764606] NFORCE-CK804: chipset revision 242 [ 48.764609] NFORCE-CK804: not 100% native mode: will probe irqs later [ 48.764614] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 48.764621] ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio [ 48.764629] ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:DMA [ 48.764635] Probing IDE interface ide0... [ 48.786728] usbcore: registered new interface driver usbfs [ 48.786749] usbcore: registered new interface driver hub [ 48.786771] usbcore: registered new device driver usb [ 48.789798] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 49.333985] ide1: I/O resource 0x376-0x376 not free. [ 49.334028] ide1: ports already in use, skipping probe [ 49.334316] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 49.334324] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, high) -> IRQ 21 [ 49.334658] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 49.334664] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 49.334992] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 49.335009] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdd000000 [ 49.395975] usb usb1: configuration #1 chosen from 1 choice [ 49.395997] hub 1-0:1.0: USB hub found [ 49.396003] hub 1-0:1.0: 10 ports detected [ 49.422027] hdd: CD-224E-N, ATAPI CD/DVD-ROM drive [ 49.478558] ide1 at 0x170-0x177,0x376 on irq 15 [ 49.502482] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 49.502489] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, high) -> IRQ 20 [ 49.502695] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 49.502701] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 49.502751] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 49.502774] ehci_hcd 0000:00:02.1: debug port 1 [ 49.502777] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 49.502787] ehci_hcd 0000:00:02.1: irq 20, io mem 0xdd001000 [ 49.502792] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 49.502862] usb usb2: configuration #1 chosen from 1 choice [ 49.502883] hub 2-0:1.0: USB hub found [ 49.502888] hub 2-0:1.0: 10 ports detected [ 49.517123] hdd: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33) [ 49.517132] Uniform CD-ROM driver Revision: 3.20 [ 49.673312] md: md0 stopped. [ 49.673917] md: bind [ 49.674062] md: bind [ 49.677180] raid1: raid set md0 active with 2 out of 2 mirrors [ 49.720643] kjournald starting. Commit interval 5 seconds [ 49.720651] EXT3-fs: mounted filesystem with ordered data mode. [ 50.148657] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 50.355392] usb 1-3: configuration #1 chosen from 1 choice [ 52.388516] lp: driver loaded but no devices found [ 52.459903] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 52.459920] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 52.857787] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 52.857805] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 54.110201] w83781d 1-002d: The W83627HF chip is better supported by the w83627hf driver, support will be dropped from the w83781d driver soon [ 54.512403] w83627hf: Found W83627HF chip at 0xc00 [ 54.710434] EXT3 FS on md0, internal journal [ 54.817263] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.855199] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 54.855204] shpchp: shpc_init: cannot reserve MMIO region [ 54.855266] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 54.855268] shpchp: shpc_init: cannot reserve MMIO region [ 54.855329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.867462] input: PC Speaker as /class/input/input0 [ 54.914315] tg3.c:v3.77 (May 31, 2007) [ 54.914333] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 28 [ 54.944436] eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:30:07:9c [ 54.944443] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 54.944445] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 54.944469] ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 29 [ 54.945369] usbcore: registered new interface driver hiddev [ 54.973261] eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:30:07:9d [ 54.973267] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 54.973269] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 55.024913] PM: Writing back config space on device 0000:0a:09.0 at offset b (was 164814e4, writing 164414e4) [ 55.024923] PM: Writing back config space on device 0000:0a:09.0 at offset 3 (was 804000, writing 804010) [ 55.024927] PM: Writing back config space on device 0000:0a:09.0 at offset 2 (was 2000000, writing 2000003) [ 55.024931] PM: Writing back config space on device 0000:0a:09.0 at offset 1 (was 2b00000, writing 2b00106) [ 55.127702] input: Dell Dell USB Keyboard as /class/input/input1 [ 55.127731] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-3 [ 55.127746] usbcore: registered new interface driver usbhid [ 55.127749] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 55.168526] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 55.814943] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 55.815020] device-mapper: ioctl: error adding target to table [ 55.815203] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 55.815276] device-mapper: ioctl: error adding target to table [ 55.815509] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 55.815580] device-mapper: ioctl: error adding target to table [ 55.815738] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 55.815810] device-mapper: ioctl: error adding target to table [ 59.315592] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 59.315595] tg3: eth0: Flow control is on for TX and on for RX. [ 60.563245] NET: Registered protocol family 10 [ 60.563341] lo: Disabled Privacy Extensions