[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-15-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 (Ubuntu 3.11.0-15.25-generic 3.11.10) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7f90000-0x00000000c7f9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c7f9e000-0x00000000c7fdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c7fe0000-0x00000000c7fedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7ff0000-0x00000000c7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001b7ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Gateway GT5676/Not Available, BIOS 7B3G1P04 02/18/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x1b8000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 00000001b8000000 aka 7040M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xc7f90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1b7e00000-0x1b7ffffff] [ 0.000000] [mem 0x1b7e00000-0x1b7ffffff] page 2M [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1b4000000-0x1b7dfffff] [ 0.000000] [mem 0x1b4000000-0x1b7dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x180000000-0x1b3ffffff] [ 0.000000] [mem 0x180000000-0x1b3ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7f8ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M [ 0.000000] [mem 0xc7e00000-0xc7f8ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35d30000-0x36e8ffff] [ 0.000000] ACPI: RSDP 00000000000fa9c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7f90000 00044 (v01 GATEWA SYSTEM 20080218 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7f90200 00084 (v02 GATEWA FACP1454 20080218 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7f905c0 04AFA (v01 7B3G1 7B3G1P04 00000004 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7f9e000 00040 [ 0.000000] ACPI: APIC 00000000c7f90390 0006C (v01 GATEWA APIC1454 20080218 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7f90400 0003C (v01 GATEWA OEMMCFG 20080218 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000c7f90440 00176 (v01 GATEWA SYSTEM 20080218 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7f9e040 00071 (v01 GATEWA OEMB1454 20080218 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7f950c0 00038 (v01 GATEWA OEMHPET 20080218 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000c7f95100 0013C (v32 AMD SB600ASF 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000c7f95240 00544 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001b7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1b7ffffff] [ 0.000000] NODE_DATA [mem 0x1b7ff9000-0x1b7ffdfff] [ 0.000000] [ffffea0000000000-ffffea0006dfffff] PMD -> [ffff8801b1600000-ffff8801b75fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x1b7ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xc7f8ffff] [ 0.000000] node 0: [mem 0x100000000-0x1b7ffffff] [ 0.000000] On node 0 totalpages: 1572654 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12735 pages used for memmap [ 0.000000] DMA32 zone: 814992 pages, LIFO batch:31 [ 0.000000] Normal zone: 11776 pages used for memmap [ 0.000000] Normal zone: 753664 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7f90000-0xc7f9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7f9e000-0xc7fdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7fe0000-0xc7fedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7fee000-0xc7feffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7ff0000-0xc7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] e820: [mem 0xc8000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801b7c00000 s86720 r8192 d23872 u524288 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548058 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c794000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000 [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff] [ 0.000000] Memory: 6025888K/6290616K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 264728K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2300.192 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.38 BogoMIPS (lpj=9200768) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000039] Security Framework initialized [ 0.000063] AppArmor: AppArmor initialized [ 0.000064] Yama: becoming mindful. [ 0.000780] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005203] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007301] Mount-cache hash table entries: 256 [ 0.007563] Initializing cgroup subsys memory [ 0.007581] Initializing cgroup subsys devices [ 0.007583] Initializing cgroup subsys freezer [ 0.007585] Initializing cgroup subsys blkio [ 0.007587] Initializing cgroup subsys perf_event [ 0.007590] Initializing cgroup subsys hugetlb [ 0.007617] tseg: 0000000000 [ 0.007628] CPU: Physical Processor ID: 0 [ 0.007629] CPU: Processor Core ID: 0 [ 0.007631] mce: CPU supports 6 MCE banks [ 0.007639] LVT offset 0 assigned for vector 0xf9 [ 0.007644] process: using AMD E400 aware idle routine [ 0.007648] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.007648] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.007648] tlb_flushall_shift: 4 [ 0.007777] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000) [ 0.009563] ACPI: Core revision 20130517 [ 0.011892] ACPI: All ACPI Tables successfully acquired [ 0.014033] ftrace: allocating 27844 entries in 109 pages [ 0.027907] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067584] smpboot: CPU0: AMD Phenom(tm) 9600 Quad-Core Processor (fam: 10, model: 02, stepping: 02) [ 0.174245] Performance Events: AMD PMU driver. [ 0.174252] ... version: 0 [ 0.174253] ... bit width: 48 [ 0.174254] ... generic registers: 4 [ 0.174255] ... value mask: 0000ffffffffffff [ 0.174257] ... max period: 00007fffffffffff [ 0.174258] ... fixed-purpose events: 0 [ 0.174259] ... event mask: 000000000000000f [ 0.176134] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.176232] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.215556] Brought up 4 CPUs [ 0.215559] smpboot: Total of 4 processors activated (18401.53 BogoMIPS) [ 0.218287] devtmpfs: initialized [ 0.220827] EVM: security.selinux [ 0.220829] EVM: security.SMACK64 [ 0.220830] EVM: security.capability [ 0.220902] PM: Registering ACPI NVS region [mem 0xc7f9e000-0xc7fdffff] (270336 bytes) [ 0.222138] regulator-dummy: no parameters [ 0.222172] RTC time: 14:56:10, date: 02/16/14 [ 0.222240] NET: Registered protocol family 16 [ 0.222384] node 0 link 0: io port [1000, ffffff] [ 0.222387] TOM: 00000000c8000000 aka 3200M [ 0.222390] node 0 link 0: mmio [a0000, bffff] [ 0.222393] node 0 link 0: mmio [c8000000, dfffffff] [ 0.222395] node 0 link 0: mmio [e0000000, efffffff] [ 0.222396] node 0 link 0: mmio [f0000000, ffefffff] [ 0.222398] TOM2: 00000001b8000000 aka 7040M [ 0.222401] bus: [bus 00-07] on node 0 link 0 [ 0.222402] bus: 00 [io 0x0000-0xffff] [ 0.222404] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.222405] bus: 00 [mem 0xc8000000-0xffffffff] [ 0.222407] bus: 00 [mem 0x1b8000000-0xfcffffffff] [ 0.222472] ACPI: bus type PCI registered [ 0.222475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.222545] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.222548] PCI: not using MMCONFIG [ 0.222550] PCI: Using configuration type 1 for base access [ 0.222551] PCI: Using configuration type 1 for extended access [ 0.222803] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.222805] mtrr: probably your BIOS does not setup all CPUs. [ 0.222806] mtrr: corrected configuration. [ 0.223691] bio: create slab at 0 [ 0.223887] ACPI: Added _OSI(Module Device) [ 0.223889] ACPI: Added _OSI(Processor Device) [ 0.223891] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.223892] ACPI: Added _OSI(Processor Aggregator Device) [ 0.224579] ACPI: EC: Look up EC in DSDT [ 0.226083] ACPI: Executed 3 blocks of module-level executable AML code [ 0.234145] ACPI: Interpreter enabled [ 0.234156] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.234161] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571) [ 0.234172] ACPI: (supports S0 S1 S4 S5) [ 0.234174] ACPI: Using IOAPIC for interrupt routing [ 0.234200] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.235906] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.246372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246459] ACPI: No dock devices found. [ 0.253298] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.253304] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.253307] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.253590] PCI host bridge to bus 0000:00 [ 0.253593] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.253596] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.253598] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.253600] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.253602] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.253604] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff] [ 0.253606] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff] [ 0.253616] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.253714] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.253752] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.253805] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.253842] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 0.253877] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.253924] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.253958] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.253993] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.254041] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.254094] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.254117] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] [ 0.254127] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] [ 0.254138] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] [ 0.254148] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] [ 0.254157] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] [ 0.254167] pci 0000:00:11.0: reg 0x24: [mem 0xfcfff800-0xfcfffbff] [ 0.254193] pci 0000:00:11.0: set SATA to AHCI mode [ 0.254311] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.254326] pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff] [ 0.254425] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.254458] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.254472] pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff] [ 0.254569] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.254608] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.254628] pci 0000:00:12.2: reg 0x10: [mem 0xfcfff000-0xfcfff0ff] [ 0.254713] pci 0000:00:12.2: supports D1 D2 [ 0.254715] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.254764] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.254803] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.254818] pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff] [ 0.254916] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.254950] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.254964] pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff] [ 0.255062] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.255102] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.255122] pci 0000:00:13.2: reg 0x10: [mem 0xfcffa800-0xfcffa8ff] [ 0.255208] pci 0000:00:13.2: supports D1 D2 [ 0.255210] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.255296] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.255455] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.255473] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.255483] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.255493] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.255503] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.255513] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.255630] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.255652] pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit] [ 0.255720] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.255767] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.255800] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.255935] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.256010] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.256043] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.256057] pci 0000:00:14.5: reg 0x10: [mem 0xfcff9000-0xfcff9fff] [ 0.256155] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.256196] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.256269] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.256337] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.256406] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.256482] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.256606] pci 0000:01:00.0: [10de:10c3] type 00 class 0x030000 [ 0.256617] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.256628] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.256639] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.256647] pci 0000:01:00.0: reg 0x24: [io 0xd800-0xd87f] [ 0.256655] pci 0000:01:00.0: reg 0x30: [mem 0xfe880000-0xfe8fffff pref] [ 0.256732] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.256742] pci 0000:01:00.1: reg 0x10: [mem 0xfe87c000-0xfe87ffff] [ 0.262210] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.262215] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.262218] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff] [ 0.262222] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.262278] pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000 [ 0.262296] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.262306] pci 0000:02:00.0: reg 0x18: [io 0xe800-0xe8ff] [ 0.262338] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.262389] pci 0000:02:00.0: supports D1 D2 [ 0.262391] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270201] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.270205] pci 0000:00:05.0: bridge window [io 0xe000-0xefff] [ 0.270208] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.270263] pci 0000:03:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.270282] pci 0000:03:00.0: reg 0x10: [mem 0xfeaff800-0xfeafffff] [ 0.270296] pci 0000:03:00.0: reg 0x14: [mem 0xfeaff400-0xfeaff47f] [ 0.270333] pci 0000:03:00.0: reg 0x20: [mem 0xfeaff000-0xfeaff07f] [ 0.270347] pci 0000:03:00.0: reg 0x24: [mem 0xfeafec00-0xfeafec7f] [ 0.278197] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.278202] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.278252] pci 0000:04:06.0: [1033:0035] type 00 class 0x0c0310 [ 0.278274] pci 0000:04:06.0: reg 0x10: [mem 0xfebff000-0xfebfffff] [ 0.278371] pci 0000:04:06.0: supports D1 D2 [ 0.278373] pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot [ 0.278421] pci 0000:04:06.1: [1033:0035] type 00 class 0x0c0310 [ 0.278443] pci 0000:04:06.1: reg 0x10: [mem 0xfebfe000-0xfebfefff] [ 0.278540] pci 0000:04:06.1: supports D1 D2 [ 0.278542] pci 0000:04:06.1: PME# supported from D0 D1 D2 D3hot [ 0.278590] pci 0000:04:06.2: [1033:00e0] type 00 class 0x0c0320 [ 0.278612] pci 0000:04:06.2: reg 0x10: [mem 0xfebfdc00-0xfebfdcff] [ 0.278708] pci 0000:04:06.2: supports D1 D2 [ 0.278710] pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot [ 0.278794] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.278801] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.278806] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.278808] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.278810] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.278813] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.278815] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode) [ 0.278818] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.279319] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15) [ 0.279368] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.279416] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.279465] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 0.279512] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled. [ 0.279563] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15) [ 0.279612] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 14 15) [ 0.279660] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 0.279769] ACPI: \_SB_.PCI0: notify handler is installed [ 0.279812] Found 1 acpi root devices [ 0.279937] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.279940] vgaarb: loaded [ 0.279941] vgaarb: bridge control possible 0000:01:00.0 [ 0.280134] SCSI subsystem initialized [ 0.280136] ACPI: bus type ATA registered [ 0.280234] libata version 3.00 loaded. [ 0.280256] ACPI: bus type USB registered [ 0.280274] usbcore: registered new interface driver usbfs [ 0.280283] usbcore: registered new interface driver hub [ 0.280309] usbcore: registered new device driver usb [ 0.280441] PCI: Using ACPI for IRQ routing [ 0.289171] PCI: pci_cache_line_size set to 64 bytes [ 0.289242] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.289244] e820: reserve RAM buffer [mem 0xc7f90000-0xc7ffffff] [ 0.289351] NetLabel: Initializing [ 0.289352] NetLabel: domain hash size = 128 [ 0.289354] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.289370] NetLabel: unlabeled traffic allowed by default [ 0.289447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.289452] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.291497] Switched to clocksource hpet [ 0.298511] AppArmor: AppArmor Filesystem Enabled [ 0.298553] pnp: PnP ACPI init [ 0.298573] ACPI: bus type PNP registered [ 0.298781] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298826] pnp 00:01: [dma 4] [ 0.298851] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.298902] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.298935] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.298964] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.299616] pnp 00:05: [dma 0 disabled] [ 0.299832] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.299875] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.299950] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.299953] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.299956] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300132] system 00:08: [io 0x0200-0x020f] has been reserved [ 0.300135] system 00:08: [io 0x0220-0x0233] has been reserved [ 0.300138] system 00:08: [io 0x0240-0x0253] has been reserved [ 0.300140] system 00:08: [io 0x0260-0x0273] has been reserved [ 0.300142] system 00:08: [io 0x0280-0x0293] has been reserved [ 0.300145] system 00:08: [io 0x0388-0x0389] has been reserved [ 0.300147] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.300150] system 00:08: [io 0x040b] has been reserved [ 0.300152] system 00:08: [io 0x04d6] has been reserved [ 0.300155] system 00:08: [io 0x0b00-0x0b0f] has been reserved [ 0.300157] system 00:08: [io 0x0b30-0x0b3f] has been reserved [ 0.300159] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.300162] system 00:08: [io 0x0c14] has been reserved [ 0.300164] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 0.300166] system 00:08: [io 0x0c52] has been reserved [ 0.300169] system 00:08: [io 0x0c6c] has been reserved [ 0.300171] system 00:08: [io 0x0c6f] has been reserved [ 0.300173] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.300176] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.300178] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.300180] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.300183] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.300185] system 00:08: [io 0x0800-0x089f] could not be reserved [ 0.300188] system 00:08: [io 0x0b20-0x0b2f] has been reserved [ 0.300190] system 00:08: [io 0x0900-0x090f] has been reserved [ 0.300193] system 00:08: [io 0x0910-0x091f] has been reserved [ 0.300195] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 0.300199] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.300202] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.300204] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300258] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.300323] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.300503] system 00:0b: [io 0x0e00-0x0e0f] has been reserved [ 0.300505] system 00:0b: [io 0x0e80-0x0e8f] has been reserved [ 0.300508] system 00:0b: [io 0x0f40-0x0f4f] has been reserved [ 0.300510] system 00:0b: [io 0x0a30-0x0a3f] has been reserved [ 0.300513] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300752] pnp 00:0c: [dma 0 disabled] [ 0.300841] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.301078] pnp 00:0d: [dma 0 disabled] [ 0.301157] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.301228] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved [ 0.301231] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301379] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.301382] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.301385] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.301387] system 00:0f: [mem 0x00100000-0xc7ffffff] could not be reserved [ 0.301390] system 00:0f: [mem 0xfed45000-0xffffffff] could not be reserved [ 0.301393] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.301490] pnp: PnP ACPI: found 16 devices [ 0.301492] ACPI: bus type PNP unregistered [ 0.308132] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.308137] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.308141] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff] [ 0.308144] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.308149] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.308151] pci 0000:00:05.0: bridge window [io 0xe000-0xefff] [ 0.308154] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.308159] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.308162] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.308167] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.308173] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.308196] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.308198] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.308200] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.308202] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.308205] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff] [ 0.308207] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.308210] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.308212] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe8fffff] [ 0.308214] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.308217] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.308219] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.308221] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.308224] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.308226] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.308228] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.308230] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.308232] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] [ 0.308234] pci_bus 0000:04: resource 8 [mem 0xc8000000-0xdfffffff] [ 0.308236] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.308281] NET: Registered protocol family 2 [ 0.308553] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.309189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.309704] TCP: Hash tables configured (established 65536 bind 65536) [ 0.309764] TCP: reno registered [ 0.309777] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.309863] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.310032] NET: Registered protocol family 1 [ 0.679520] pci 0000:01:00.0: Boot video device [ 0.679799] PCI: CLS 64 bytes, default 64 [ 0.679864] Trying to unpack rootfs image as initramfs... [ 1.027131] Freeing initrd memory: 17792K (ffff880035d30000 - ffff880036e90000) [ 1.027496] PCI-DMA: Disabling AGP. [ 1.027626] PCI-DMA: aperture base @ bc000000 size 65536 KB [ 1.027628] PCI-DMA: using GART IOMMU. [ 1.027632] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.033477] LVT offset 1 assigned for vector 0x400 [ 1.033491] Failed to setup IBS LVT offset, IBSCTL = 0xffffffff [ 1.033495] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [ 1.033497] [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [ 1.033498] Failed to setup IBS, -22 [ 1.033543] Scanning for low memory corruption every 60 seconds [ 1.033799] Initialise module verification [ 1.033849] audit: initializing netlink socket (disabled) [ 1.033865] type=2000 audit(1392562570.928:1): initialized [ 1.062041] bounce pool size: 64 pages [ 1.062063] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.063713] zbud: loaded [ 1.063872] VFS: Disk quotas dquot_6.5.2 [ 1.063926] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.064520] fuse init (API version 7.22) [ 1.064603] msgmni has been set to 11932 [ 1.065240] Key type asymmetric registered [ 1.065247] Asymmetric key parser 'x509' registered [ 1.065326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.065376] io scheduler noop registered [ 1.065378] io scheduler deadline registered (default) [ 1.065407] io scheduler cfq registered [ 1.065554] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.065627] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 1.065689] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X [ 1.065759] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.065777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.065931] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.065938] ACPI: Power Button [PWRB] [ 1.065978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.065980] ACPI: Power Button [PWRF] [ 1.066172] GHES: HEST is not enabled! [ 1.066274] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.086789] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.107291] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.108888] Linux agpgart interface v0.103 [ 1.110522] brd: module loaded [ 1.111384] loop: module loaded [ 1.111787] libphy: Fixed MDIO Bus: probed [ 1.111880] tun: Universal TUN/TAP device driver, 1.6 [ 1.111881] tun: (C) 1999-2004 Max Krasnyansky [ 1.111935] PPP generic driver version 2.4.2 [ 1.111985] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.111986] ehci-pci: EHCI PCI platform driver [ 1.112181] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.112188] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.112200] QUIRK: Enable AMD PLL fix [ 1.112202] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.112205] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.112220] ehci-pci 0000:00:12.2: debug port 1 [ 1.112268] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff000 [ 1.123166] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.123189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.123191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.123193] usb usb1: Product: EHCI Host Controller [ 1.123195] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd [ 1.123197] usb usb1: SerialNumber: 0000:00:12.2 [ 1.123308] hub 1-0:1.0: USB hub found [ 1.123314] hub 1-0:1.0: 6 ports detected [ 1.123597] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.123604] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.123608] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.123611] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.123626] ehci-pci 0000:00:13.2: debug port 1 [ 1.123657] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcffa800 [ 1.135154] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.135166] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.135168] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.135170] usb usb2: Product: EHCI Host Controller [ 1.135172] usb usb2: Manufacturer: Linux 3.11.0-15-generic ehci_hcd [ 1.135174] usb usb2: SerialNumber: 0000:00:13.2 [ 1.135265] hub 2-0:1.0: USB hub found [ 1.135270] hub 2-0:1.0: 6 ports detected [ 1.135467] ehci-pci 0000:04:06.2: EHCI Host Controller [ 1.135473] ehci-pci 0000:04:06.2: new USB bus registered, assigned bus number 3 [ 1.135515] ehci-pci 0000:04:06.2: irq 23, io mem 0xfebfdc00 [ 1.147149] ehci-pci 0000:04:06.2: USB 2.0 started, EHCI 1.00 [ 1.147160] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.147162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147164] usb usb3: Product: EHCI Host Controller [ 1.147166] usb usb3: Manufacturer: Linux 3.11.0-15-generic ehci_hcd [ 1.147168] usb usb3: SerialNumber: 0000:04:06.2 [ 1.147265] hub 3-0:1.0: USB hub found [ 1.147268] hub 3-0:1.0: 3 ports detected [ 1.147358] ehci-platform: EHCI generic platform driver [ 1.147367] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.147368] ohci-pci: OHCI PCI platform driver [ 1.147520] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.147527] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.147553] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000 [ 1.207121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.207123] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.207125] usb usb4: Product: OHCI PCI host controller [ 1.207127] usb usb4: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.207128] usb usb4: SerialNumber: 0000:00:12.0 [ 1.207210] hub 4-0:1.0: USB hub found [ 1.207217] hub 4-0:1.0: 3 ports detected [ 1.207447] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.207453] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 5 [ 1.207468] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000 [ 1.267090] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.267092] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.267094] usb usb5: Product: OHCI PCI host controller [ 1.267096] usb usb5: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.267097] usb usb5: SerialNumber: 0000:00:12.1 [ 1.267181] hub 5-0:1.0: USB hub found [ 1.267187] hub 5-0:1.0: 3 ports detected [ 1.267399] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.267406] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 1.267432] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000 [ 1.327062] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.327064] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.327066] usb usb6: Product: OHCI PCI host controller [ 1.327067] usb usb6: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.327070] usb usb6: SerialNumber: 0000:00:13.0 [ 1.327155] hub 6-0:1.0: USB hub found [ 1.327160] hub 6-0:1.0: 3 ports detected [ 1.327382] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.327389] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 7 [ 1.327404] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000 [ 1.387036] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.387038] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.387040] usb usb7: Product: OHCI PCI host controller [ 1.387042] usb usb7: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.387043] usb usb7: SerialNumber: 0000:00:13.1 [ 1.387131] hub 7-0:1.0: USB hub found [ 1.387137] hub 7-0:1.0: 3 ports detected [ 1.387353] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.387359] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 1.387374] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcff9000 [ 1.439030] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.447009] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.447011] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.447013] usb usb8: Product: OHCI PCI host controller [ 1.447015] usb usb8: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.447017] usb usb8: SerialNumber: 0000:00:14.5 [ 1.447105] hub 8-0:1.0: USB hub found [ 1.447112] hub 8-0:1.0: 2 ports detected [ 1.447240] ohci-pci 0000:04:06.0: OHCI PCI host controller [ 1.447246] ohci-pci 0000:04:06.0: new USB bus registered, assigned bus number 9 [ 1.447271] ohci-pci 0000:04:06.0: irq 21, io mem 0xfebff000 [ 1.532773] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.532776] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.532778] usb usb9: Product: OHCI PCI host controller [ 1.532779] usb usb9: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.532781] usb usb9: SerialNumber: 0000:04:06.0 [ 1.532871] hub 9-0:1.0: USB hub found [ 1.532877] hub 9-0:1.0: 2 ports detected [ 1.533014] ohci-pci 0000:04:06.1: OHCI PCI host controller [ 1.533020] ohci-pci 0000:04:06.1: new USB bus registered, assigned bus number 10 [ 1.533043] ohci-pci 0000:04:06.1: irq 22, io mem 0xfebfe000 [ 1.588248] usb 1-2: New USB device found, idVendor=0a48, idProduct=5014 [ 1.588253] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.588256] usb 1-2: Product: USB2.0-CRW [ 1.588258] usb 1-2: Manufacturer: Generic [ 1.588260] usb 1-2: SerialNumber: 20021111153705700 [ 1.616720] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.616723] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.616725] usb usb10: Product: OHCI PCI host controller [ 1.616726] usb usb10: Manufacturer: Linux 3.11.0-15-generic ohci_hcd [ 1.616728] usb usb10: SerialNumber: 0000:04:06.1 [ 1.616822] hub 10-0:1.0: USB hub found [ 1.616828] hub 10-0:1.0: 1 port detected [ 1.616896] ohci-platform: OHCI generic platform driver [ 1.616904] uhci_hcd: USB Universal Host Controller Interface driver [ 1.616985] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.617421] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.617427] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.617569] mousedev: PS/2 mouse device common for all mice [ 1.617729] rtc_cmos 00:02: RTC can wake from S4 [ 1.617854] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.617880] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.617946] device-mapper: uevent: version 1.0.3 [ 1.618020] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 1.618027] cpuidle: using governor ladder [ 1.618028] cpuidle: using governor menu [ 1.618039] ledtrig-cpu: registered to indicate activity on CPUs [ 1.618155] TCP: cubic registered [ 1.618258] NET: Registered protocol family 10 [ 1.618488] NET: Registered protocol family 17 [ 1.618499] Key type dns_resolver registered [ 1.618827] PM: Hibernation image not present or could not be loaded. [ 1.618831] Loading module verification certificates [ 1.620048] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 233c65a83836c14ba34eda83a0b805044bc3b448' [ 1.620063] registered taskstats version 1 [ 1.623637] Key type trusted registered [ 1.626328] Key type encrypted registered [ 1.629009] AppArmor: AppArmor sha1 policy hashing enabled [ 1.629350] Magic number: 2:552:940 [ 1.629484] rtc_cmos 00:02: setting system clock to 2014-02-16 14:56:12 UTC (1392562572) [ 1.629593] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.629721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.629723] EDD information not available. [ 1.631448] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000) [ 1.631451] Write protecting the kernel read-only data: 12288k [ 1.634709] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000) [ 1.637067] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000) [ 1.638142] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.657085] systemd-udevd[115]: starting version 204 [ 1.682719] sky2: driver version 1.30 [ 1.682941] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 1.683011] sky2 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.683288] sky2 0000:02:00.0 eth0: addr 00:1c:25:8b:72:28 [ 1.689427] ahci 0000:00:11.0: version 3.0 [ 1.689634] ahci 0000:00:11.0: irq 44 for MSI/MSI-X [ 1.689742] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.689746] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.690626] scsi0 : ahci [ 1.690752] scsi1 : ahci [ 1.690836] scsi2 : ahci [ 1.691187] scsi3 : ahci [ 1.691245] ata1: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff900 irq 44 [ 1.691249] ata2: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff980 irq 44 [ 1.691252] ata3: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa00 irq 44 [ 1.691254] ata4: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa80 irq 44 [ 1.691744] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.692313] scsi4 : pata_atiixp [ 1.692835] scsi5 : pata_atiixp [ 1.693124] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.693126] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.693745] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1.693909] scsi6 : usb-storage 1-2:1.0 [ 1.694008] usbcore: registered new interface driver usb-storage [ 1.754897] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 1.758911] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 1.920373] usb 3-2: New USB device found, idVendor=19ff, idProduct=0102 [ 1.920379] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.920382] usb 3-2: Product: Dynex 1.3MP Webcam [ 1.920384] usb 3-2: Manufacturer: Dynex [ 2.030757] tsc: Refined TSC clocksource calibration: 2300.126 MHz [ 2.034757] usb 3-3: new high-speed USB device number 3 using ehci-pci [ 2.176056] usb 3-3: New USB device found, idVendor=04b8, idProduct=085d [ 2.176059] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.176061] usb 3-3: Product: EPSON WorkForce 630 Series [ 2.176063] usb 3-3: Manufacturer: EPSON [ 2.176064] usb 3-3: SerialNumber: 4D5154593130363033 [ 2.181823] usb-storage 3-3:1.2: USB Mass Storage device detected [ 2.181946] scsi7 : usb-storage 3-3:1.2 [ 2.182701] ata2: softreset failed (device not ready) [ 2.182707] ata2: applying PMP SRST workaround and retrying [ 2.182727] ata1: softreset failed (device not ready) [ 2.182731] ata1: applying PMP SRST workaround and retrying [ 2.182749] ata3: softreset failed (device not ready) [ 2.182751] ata3: applying PMP SRST workaround and retrying [ 2.182769] ata4: softreset failed (device not ready) [ 2.182771] ata4: applying PMP SRST workaround and retrying [ 2.258760] firewire_core 0000:03:00.0: created device fw0: GUID 0078529f00016c20, S400 [ 2.354647] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.354679] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.354707] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.354735] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.354996] ata2.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HA, max UDMA/133 [ 2.354999] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.355275] ata2.00: configured for UDMA/133 [ 2.355563] ata3.00: ATA-8: WDC WD3200AAJS-22B4A0, 01.03A01, max UDMA/133 [ 2.355565] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.356527] ata3.00: configured for UDMA/133 [ 2.358307] ata1.00: ATAPI: hp DVD-RAM GH40L, RB12, max UDMA/100 [ 2.362824] ata1.00: configured for UDMA/100 [ 2.371503] scsi 0:0:0:0: CD-ROM hp DVD-RAM GH40L RB12 PQ: 0 ANSI: 5 [ 2.379927] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.379929] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.380076] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.380189] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.380424] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 2.380811] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.380873] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.380987] sd 1:0:0:0: [sda] Write Protect is off [ 2.380989] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.381010] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5 [ 2.381028] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.381170] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.381248] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.381318] sd 2:0:0:0: [sdb] Write Protect is off [ 2.381321] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.381347] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.381845] sda: sda1 sda2 < sda5 > [ 2.382215] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.382448] ata4.00: ATA-7: ST3160812AS, 3.AAE, max UDMA/133 [ 2.382452] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.390850] sdb: sdb1 [ 2.391382] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.440742] ata4.00: configured for UDMA/133 [ 2.440901] scsi 3:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 [ 2.441103] sd 3:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.441128] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.441182] sd 3:0:0:0: [sdc] Write Protect is off [ 2.441186] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.441223] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.442602] usb 6-2: new low-speed USB device number 2 using ohci-pci [ 2.480426] sdc: sdc1 [ 2.480828] sd 3:0:0:0: [sdc] Attached SCSI disk [ 2.566530] bio: create slab at 1 [ 2.608643] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem [ 2.608648] EXT4-fs (dm-0): write access will be enabled during recovery [ 2.609491] usb 6-2: New USB device found, idVendor=093a, idProduct=2510 [ 2.609494] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.609497] usb 6-2: Product: USB Optical Mouse [ 2.609499] usb 6-2: Manufacturer: PixArt [ 2.615602] hidraw: raw HID events driver (C) Jiri Kosina [ 2.622590] usbcore: registered new interface driver usbhid [ 2.622594] usbhid: USB HID core driver [ 2.625032] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input3 [ 2.625236] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-2/input0 [ 2.696956] scsi 6:0:0:0: Direct-Access IOI-CFC PQ: 0 ANSI: 0 CCS [ 2.703322] scsi 6:0:0:1: Direct-Access IOI-SMC PQ: 0 ANSI: 0 CCS [ 2.709689] scsi 6:0:0:2: Direct-Access IOI-MMC PQ: 0 ANSI: 0 CCS [ 2.712744] EXT4-fs (dm-0): orphan cleanup on readonly fs [ 2.714113] EXT4-fs (dm-0): 4 orphan inodes deleted [ 2.714116] EXT4-fs (dm-0): recovery complete [ 2.716134] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 2.716203] scsi 6:0:0:3: Direct-Access IOI-MSC PQ: 0 ANSI: 0 CCS [ 2.716564] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.716826] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 2.717043] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 2.717251] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 2.739293] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 2.740051] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 2.740793] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 2.741552] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 3.030432] Switched to clocksource tsc [ 3.153545] Adding 6291452k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:6291452k SSFS [ 3.181886] scsi 7:0:0:0: Direct-Access EPSON Storage 1.00 PQ: 0 ANSI: 2 [ 3.182164] sd 7:0:0:0: Attached scsi generic sg8 type 0 [ 3.189748] sd 7:0:0:0: [sdh] 2001888 512-byte logical blocks: (1.02 GB/977 MiB) [ 3.192859] sd 7:0:0:0: [sdh] Write Protect is off [ 3.192862] sd 7:0:0:0: [sdh] Mode Sense: 24 00 00 08 [ 3.195605] sd 7:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.216600] sdh: sdh1 [ 3.227884] sd 7:0:0:0: [sdh] Attached SCSI removable disk [ 3.240453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.307788] systemd-udevd[342]: starting version 204 [ 3.353614] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 3.357284] lp: driver loaded but no devices found [ 3.726990] parport_pc 00:05: reported by Plug and Play ACPI [ 3.727059] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3.734498] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.734617] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 3.752581] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 3.752722] sp5100_tco: PCI Revision ID: 0x3a [ 3.752754] sp5100_tco: failed to find MMIO address, giving up. [ 3.770476] type=1400 audit(1392562574.637:2): apparmor="STATUS" operation="profile_load" parent=420 profile="unconfined" name="/sbin/dhclient" pid=424 comm="apparmor_parser" [ 3.770486] type=1400 audit(1392562574.637:3): apparmor="STATUS" operation="profile_load" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 3.770492] type=1400 audit(1392562574.637:4): apparmor="STATUS" operation="profile_load" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 3.771196] type=1400 audit(1392562574.637:5): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 3.771204] type=1400 audit(1392562574.637:6): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 3.771616] type=1400 audit(1392562574.637:7): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 3.788706] [drm] Initialized drm 1.1.0 20060810 [ 3.792134] MCE: In-kernel MCE decoding enabled. [ 3.792790] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 3.812413] EDAC MC: Ver: 3.0.0 [ 3.818175] lp0: using parport0 (interrupt-driven). [ 3.821793] AMD64 EDAC driver v3.4.0 [ 3.821893] EDAC amd64: DRAM ECC disabled. [ 3.821913] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.821913] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 3.821913] (Note that use of the override may cause unknown side effects.) [ 3.845785] wmi: Mapper loaded [ 3.851917] Linux video capture interface: v2.00 [ 3.857321] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x085D [ 3.857457] usbcore: registered new interface driver usblp [ 3.884731] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8180b1 [ 3.884738] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.884740] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.885528] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.895990] uvcvideo: Found UVC 1.00 device Dynex 1.3MP Webcam (19ff:0102) [ 3.907627] input: Dynex 1.3MP Webcam as /devices/pci0000:00/0000:00:14.4/0000:04:06.2/usb3/3-2/3-2:1.0/input/input4 [ 3.908192] usbcore: registered new interface driver uvcvideo [ 3.908196] USB Video Class driver (1.1.1) [ 3.952271] microcode: CPU0: patch_level=0x01000065 [ 3.954571] 2:3:1: cannot get freq at ep 0x84 [ 3.963103] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.963105] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 3.963290] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.963295] nouveau [ VBIOS][0000:01:00.0] version 70.18.5f.00.00 [ 3.963777] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 3.963779] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB [ 3.963781] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags [ 3.967602] microcode: CPU0: new patch_level=0x01000083 [ 3.967628] microcode: CPU1: patch_level=0x01000065 [ 3.967640] microcode: CPU1: new patch_level=0x01000083 [ 3.967658] microcode: CPU2: patch_level=0x01000065 [ 3.967668] microcode: CPU2: new patch_level=0x01000083 [ 3.967681] microcode: CPU3: patch_level=0x01000065 [ 3.967689] microcode: CPU3: new patch_level=0x01000083 [ 3.967829] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 3.980911] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong. [ 3.980918] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1<6>[ 3.981235] usbcore: registered new interface driver snd-usb-audio [ 4.004050] kvm: Nested Virtualization enabled [ 4.004058] kvm: Nested Paging enabled [ 4.224797] ppdev: user-space parallel port driver [ 4.503575] init: failsafe main process (677) killed by TERM signal [ 4.719881] type=1400 audit(1392562575.585:8): apparmor="STATUS" operation="profile_load" parent=773 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=780 comm="apparmor_parser" [ 4.719893] type=1400 audit(1392562575.585:9): apparmor="STATUS" operation="profile_load" parent=773 profile="unconfined" name="chromium_browser" pid=780 comm="apparmor_parser" [ 4.737154] type=1400 audit(1392562575.601:10): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="chromium_browser" pid=780 comm="apparmor_parser" [ 5.155740] init: smbd main process (690) terminated with status 255 [ 5.157757] init: smbd main process ended, respawning [ 5.203727] Bluetooth: Core ver 2.16 [ 5.203809] NET: Registered protocol family 31 [ 5.203812] Bluetooth: HCI device and connection manager initialized [ 5.204248] Bluetooth: HCI socket layer initialized [ 5.204253] Bluetooth: L2CAP socket layer initialized [ 5.204260] Bluetooth: SCO socket layer initialized [ 5.229486] Bluetooth: RFCOMM TTY layer initialized [ 5.229512] Bluetooth: RFCOMM socket layer initialized [ 5.229515] Bluetooth: RFCOMM ver 1.11 [ 5.245421] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 5.245438] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 5.245443] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 5.245826] hda-intel 0000:00:14.2: Using LPIB position fix [ 5.245949] [TTM] Zone kernel: Available graphics memory: 3056420 kiB [ 5.245951] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.245954] [TTM] Initializing pool allocator [ 5.245961] [TTM] Initializing DMA pool allocator [ 5.245977] nouveau [ DRM] VRAM: 1024 MiB [ 5.245978] nouveau [ DRM] GART: 1048576 MiB [ 5.245985] nouveau [ DRM] TMDS table version 2.0 [ 5.245987] nouveau [ DRM] DCB version 4.0 [ 5.245990] nouveau [ DRM] DCB outp 00: 01000302 00020030 [ 5.245993] nouveau [ DRM] DCB outp 01: 02000300 00000000 [ 5.245995] nouveau [ DRM] DCB outp 02: 02011362 00020010 [ 5.245996] nouveau [ DRM] DCB outp 03: 01022310 00000000 [ 5.245999] nouveau [ DRM] DCB conn 00: 00001030 [ 5.246001] nouveau [ DRM] DCB conn 01: 00002161 [ 5.246003] nouveau [ DRM] DCB conn 02: 00000200 [ 5.254662] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.254664] [drm] No driver support for vblank timestamp query. [ 5.254816] nouveau [ DRM] 3 available performance level(s) [ 5.254820] nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV [ 5.254823] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV [ 5.254825] nouveau [ DRM] 3: core 520MHz shader 1238MHz memory 600MHz voltage 1000mV [ 5.254828] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV [ 5.264847] nouveau [ DRM] MM: using COPY for buffer copies [ 5.273095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.273102] Bluetooth: BNEP filters: protocol multicast [ 5.273127] Bluetooth: BNEP socket layer initialized [ 5.293020] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 5.330939] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo ffff8801adbae400 [ 5.331109] fbcon: nouveaufb (fb0) is primary device [ 5.339827] hda_codec: ALC1200: SKU not ready 0x411111f0 [ 5.340321] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.340322] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.340323] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.340323] mono: mono_out=0x0 [ 5.340324] dig-out=0x1e/0x0 [ 5.340324] inputs: [ 5.340326] Front Mic=0x19 [ 5.340327] Rear Mic=0x18 [ 5.340328] Line=0x1c [ 5.340329] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 5.340330] realtek: Enable default setup for auto mode as fallback [ 5.357784] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 5.358051] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 5.358291] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 5.358502] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 5.358720] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 5.358928] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.359285] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.359364] init: smbd main process (814) terminated with status 255 [ 5.359403] init: smbd main process ended, respawning [ 5.359505] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 5.429913] Console: switching to colour frame buffer device 160x64 [ 5.431084] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 5.431087] nouveau 0000:01:00.0: registered panic notifier [ 5.431097] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 5.434153] hda_intel: Disabling MSI [ 5.434176] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 5.434236] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 5.438419] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 5.439694] init: avahi-cups-reload main process (833) terminated with status 1 [ 5.541080] init: smbd main process (846) terminated with status 255 [ 5.541116] init: smbd main process ended, respawning [ 5.849678] init: smbd main process (880) terminated with status 255 [ 5.849721] init: smbd main process ended, respawning [ 5.859740] sky2 0000:02:00.0 eth0: enabling interface [ 5.860537] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.861465] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.003493] init: smbd main process (893) terminated with status 255 [ 6.003611] init: smbd main process ended, respawning [ 6.132407] init: smbd main process (901) terminated with status 255 [ 6.132522] init: smbd main process ended, respawning [ 6.249089] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 6.249231] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 6.249308] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 6.249375] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 6.272514] init: smbd main process (907) terminated with status 255 [ 6.272635] init: smbd main process ended, respawning [ 6.428679] init: smbd main process (914) terminated with status 255 [ 6.428794] init: smbd main process ended, respawning [ 6.568255] init: smbd main process (949) terminated with status 255 [ 6.568369] init: smbd main process ended, respawning [ 6.772387] vmmon: module verification failed: signature and/or required key missing - tainting kernel [ 6.773167] /dev/vmmon[1048]: Module vmmon: registered with major=10 minor=165 [ 6.773175] /dev/vmmon[1048]: Module vmmon: initialized [ 6.815976] Guest personality initialized and is inactive [ 6.817079] VMCI host device registered (name=vmci, major=10, minor=57) [ 6.817082] Initialized host personality [ 6.837733] init: smbd main process (983) terminated with status 255 [ 6.837846] init: smbd main process ended, respawning [ 6.933343] NET: Registered protocol family 40