[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-031300rc8-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash libata.noacpi=1 libata.force=1:3.0Gbps,2:1,5Gbps,2:80c modprobe.blacklist=pata_acpi [ 0.000000] BIOS-e820: [mem 0x00000000c3f7a000-0x00000000c3f7cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c3f81000-0x00000000c3f81fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c3f8b000-0x00000000c3f8bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c3f9f000-0x00000000c3ffefff] ACPI data [ 0.000000] ACPI: BOOT 00000000c3ffefd8 000028 (v01 LENOVO TP-6N 00001450 LTP 00000001) [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-031300rc8-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash libata.noacpi=1 libata.force=1:3.0Gbps,2:1,5Gbps,2:80c modprobe.blacklist=pata_acpi [ 0.000000] Memory: 8076944K/8318476K available (7476K kernel code, 1128K rwdata, 3500K rodata, 1344K init, 1436K bss, 241532K reserved) [ 0.681541] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.682192] ata: failed to parse force parameter "5Gbps" (unknown value) [ 0.682302] libata version 3.00 loaded. [ 2.338113] Write protecting the kernel read-only data: 12288k [ 2.431359] scsi0 : ahci [ 2.431511] scsi1 : ahci [ 2.431655] scsi2 : ahci [ 2.431805] scsi3 : ahci [ 2.431941] scsi4 : ahci [ 2.432138] scsi5 : ahci [ 2.432235] ata1: FORCE: PHY spd limit set to 3.0Gbps [ 2.432240] ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 53 [ 2.432248] ata2: FORCE: PHY spd limit set to 1.5Gbps [ 2.432251] ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 53 [ 2.432253] ata3: DUMMY [ 2.432255] ata4: DUMMY [ 2.432260] ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 53 [ 2.432268] ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 53 [ 2.750752] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2.751718] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.751720] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 2.751722] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.752446] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.752626] ata1.00: configured for UDMA/133 [ 2.753117] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5 [ 2.753468] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.071004] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.072604] ata2: FORCE: cable set to 80c [ 3.072617] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66 [ 3.074581] ata2.00: configured for UDMA/66 [ 3.076551] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT20 PQ: 0 ANSI: 5 [ 3.079856] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.080263] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.080389] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.399329] ata5: SATA link down (SStatus 0 SControl 300) [ 3.719481] ata6: SATA link down (SStatus 0 SControl 300) [ 16.205351] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 2772.481080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2772.483155] ata2: FORCE: cable set to 80c [ 2772.486807] ata2.00: configured for UDMA/66 [ 2772.489069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2772.489979] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2772.490707] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2772.490793] ata1.00: configured for UDMA/133 [ 2772.493037] ata6: SATA link down (SStatus 0 SControl 300) [ 2772.496989] ata5: SATA link down (SStatus 0 SControl 300) [10496.898612] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [10496.900231] ata2: FORCE: cable set to 80c [10496.902019] ata2.00: configured for UDMA/66 [10496.914654] ata5: SATA link down (SStatus 0 SControl 300) [10496.914687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [10496.915465] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [10496.922583] ata6: SATA link down (SStatus 0 SControl 300) [10497.069726] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [10497.069849] ata1.00: configured for UDMA/133 [12212.956066] ata6: SATA link down (SStatus 0 SControl 300) [12212.956228] ata5: SATA link down (SStatus 0 SControl 300) [12212.956421] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [12212.957540] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [12212.964145] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [12212.965788] ata2: FORCE: cable set to 80c [12212.967628] ata2.00: configured for UDMA/66 [12213.109892] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [12213.110039] ata1.00: configured for UDMA/133 [12213.720684] HDMI: invalid ELD data byte 0 [12214.044707] HDMI: invalid ELD data byte 0 [12214.360956] HDMI: invalid ELD data byte 0 [12214.677227] HDMI: invalid ELD data byte 0 [12214.993446] HDMI: invalid ELD data byte 0 [12215.309687] HDMI: invalid ELD data byte 0 [12215.625896] HDMI: invalid ELD data byte 0 [12215.942184] HDMI: invalid ELD data byte 0 [12216.258401] HDMI: invalid ELD data byte 0 [16157.527474] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [16157.528408] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [16157.551477] ata6: SATA link down (SStatus 0 SControl 300) [16157.551583] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [16157.553229] ata2: FORCE: cable set to 80c [16157.555066] ata2.00: configured for UDMA/66 [16157.563394] ata5: SATA link down (SStatus 0 SControl 300) [16157.673860] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [16157.673986] ata1.00: configured for UDMA/133 [16548.437906] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [16548.438813] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [16548.439407] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [16548.439529] ata1.00: configured for UDMA/133 [16548.445818] ata5: SATA link down (SStatus 0 SControl 300) [16548.453822] ata6: SATA link down (SStatus 0 SControl 300) [16548.462034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [16548.464120] ata2: FORCE: cable set to 80c [16548.467761] ata2.00: configured for UDMA/66 [25772.523312] ata1.00: exception Emask 0x40 SAct 0x1 SErr 0x880800 action 0x6 [25772.523321] ata1.00: irq_stat 0x40000008 [25772.523327] ata1: SError: { HostInt 10B8B LinkSeq } [25772.523333] ata1.00: failed command: WRITE FPDMA QUEUED [25772.523345] ata1.00: cmd 61/10:00:70:43:5e/00:00:2f:00:00/40 tag 0 ncq 8192 out [25772.523351] ata1.00: status: { DRDY ERR } [25772.523355] ata1.00: error: { ICRC ABRT } [25772.523363] ata1: hard resetting link [25772.844800] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25772.845906] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25772.846351] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25772.846428] ata1.00: configured for UDMA/133 [25772.860735] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 [25772.860743] ata1: irq_stat 0x40000001 [25772.860749] ata1: SError: { HostInt 10B8B } [25772.860757] ata1: hard resetting link [25773.180880] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25773.181674] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25773.182086] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25773.182160] ata1.00: configured for UDMA/133 [25773.196746] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t3 [25773.196754] ata1: irq_stat 0x40000001 [25773.196759] ata1: SError: { HostInt 10B8B } [25773.196767] ata1: hard resetting link [25773.516944] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25773.517912] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25773.518370] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25773.518493] ata1.00: configured for UDMA/133 [25773.532839] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t2 [25773.532846] ata1: irq_stat 0x40000001 [25773.532852] ata1: SError: { HostInt 10B8B } [25773.532860] ata1: hard resetting link [25773.853100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25773.854128] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25773.854210] ata1.00: failed to get Identify Device Data, Emask 0x1 [25773.854225] ata1.00: failed to set xfermode (err_mask=0x40) [25778.854744] ata1: hard resetting link [25779.175018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25779.175897] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25779.176373] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25779.176445] ata1.00: configured for UDMA/133 [25779.190780] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t1 [25779.190786] ata1: irq_stat 0x40000001 [25779.190791] ata1: SError: { HostInt 10B8B } [25779.190797] ata1: hard resetting link [25779.510987] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25779.511708] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25779.512089] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25779.512156] ata1.00: configured for UDMA/133 [25779.526915] ata1: EH pending after 5 tries, giving up [25779.526931] ata1: EH complete [25932.188362] ata1.00: exception Emask 0x42 SAct 0x1 SErr 0x1880c01 action 0x6 [25932.188371] ata1.00: irq_stat 0x40000008 [25932.188377] ata1: SError: { RecovData Proto HostInt 10B8B LinkSeq TrStaTrns } [25932.188383] ata1.00: failed command: WRITE FPDMA QUEUED [25932.188395] ata1.00: cmd 61/08:00:a0:a1:8c/00:00:1c:00:00/40 tag 0 ncq 4096 out [25932.188400] ata1.00: status: { DRDY ERR } [25932.188404] ata1.00: error: { ICRC ABRT } [25932.188413] ata1: hard resetting link [25932.508420] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25932.509246] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25932.509797] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25932.509915] ata1.00: configured for UDMA/133 [25932.524381] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 [25932.524389] ata1: irq_stat 0x40000001 [25932.524394] ata1: SError: { HostInt 10B8B } [25932.524403] ata1: hard resetting link [25932.844566] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25932.845550] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25932.845814] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100) [25932.845820] ata1.00: revalidation failed (errno=-5) [25937.846322] ata1: hard resetting link [25938.166479] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25938.167280] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.167697] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.167771] ata1.00: configured for UDMA/133 [25938.182423] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t3 [25938.182431] ata1: irq_stat 0x40000001 [25938.182437] ata1: SError: { HostInt 10B8B } [25938.182445] ata1: hard resetting link [25938.506614] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25938.507426] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.507894] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.507968] ata1.00: configured for UDMA/133 [25938.522479] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t2 [25938.522487] ata1: irq_stat 0x40000001 [25938.522492] ata1: SError: { HostInt 10B8B } [25938.522500] ata1: hard resetting link [25938.842696] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25938.843872] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.844269] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25938.844342] ata1.00: configured for UDMA/133 [25938.858593] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t1 [25938.858600] ata1: irq_stat 0x40000001 [25938.858605] ata1: SError: { HostInt 10B8B } [25938.858613] ata1: hard resetting link [25939.178936] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25939.179711] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25939.180158] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25939.180231] ata1.00: configured for UDMA/133 [25939.194700] ata1: EH pending after 5 tries, giving up [25939.194717] ata1: EH complete [25985.122476] ata1.00: exception Emask 0x40 SAct 0x1 SErr 0x880800 action 0x6 [25985.122485] ata1.00: irq_stat 0x40000008 [25985.122492] ata1: SError: { HostInt 10B8B LinkSeq } [25985.122497] ata1.00: failed command: WRITE FPDMA QUEUED [25985.122509] ata1.00: cmd 61/08:00:c0:a2:8c/00:00:1c:00:00/40 tag 0 ncq 4096 out [25985.122515] ata1.00: status: { DRDY ERR } [25985.122519] ata1.00: error: { ICRC ABRT } [25985.122527] ata1: hard resetting link [25985.439081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25985.439948] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25985.440469] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25985.440582] ata1.00: configured for UDMA/133 [25985.455048] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 [25985.455059] ata1: irq_stat 0x40000001 [25985.455067] ata1: SError: { HostInt 10B8B } [25985.455078] ata1: hard resetting link [25985.775226] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25985.776286] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25985.776698] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25985.776771] ata1.00: configured for UDMA/133 [25985.791143] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t3 [25985.791150] ata1: irq_stat 0x40000001 [25985.791156] ata1: SError: { HostInt 10B8B } [25985.791164] ata1: hard resetting link [25986.111329] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25986.112209] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.112673] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.112750] ata1.00: configured for UDMA/133 [25986.127192] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t2 [25986.127199] ata1: irq_stat 0x40000001 [25986.127205] ata1: SError: { HostInt 10B8B } [25986.127212] ata1: hard resetting link [25986.447451] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25986.448225] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.448629] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.448700] ata1.00: configured for UDMA/133 [25986.463415] ata1: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t1 [25986.463423] ata1: irq_stat 0x40000001 [25986.463429] ata1: SError: { HostInt 10B8B } [25986.463437] ata1: hard resetting link [25986.783578] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [25986.784457] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.784847] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [25986.784923] ata1.00: configured for UDMA/133 [25986.799516] ata1: EH pending after 5 tries, giving up [25986.799534] ata1: EH complete [26081.212825] ata1: limiting SATA link speed to 1.5 Gbps [26081.212837] ata1.00: exception Emask 0x42 SAct 0x1ff SErr 0x880c01 action 0x6 frozen [26081.212845] ata1: SError: { RecovData Proto HostInt 10B8B LinkSeq } [26081.212851] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212862] ata1.00: cmd 61/08:00:10:a4:8c/00:00:1c:00:00/40 tag 0 ncq 4096 out [26081.212868] ata1.00: status: { DRDY } [26081.212872] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212882] ata1.00: cmd 61/08:08:08:c1:47/00:00:2f:00:00/40 tag 1 ncq 4096 out [26081.212887] ata1.00: status: { DRDY } [26081.212892] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212902] ata1.00: cmd 61/08:10:58:c0:07/00:00:00:00:00/40 tag 2 ncq 4096 out [26081.212907] ata1.00: status: { DRDY } [26081.212911] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212921] ata1.00: cmd 61/08:18:c0:c0:07/00:00:00:00:00/40 tag 3 ncq 4096 out [26081.212926] ata1.00: status: { DRDY } [26081.212930] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212940] ata1.00: cmd 61/08:20:58:c3:c7/00:00:02:00:00/40 tag 4 ncq 4096 out [26081.212945] ata1.00: status: { DRDY } [26081.212950] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212960] ata1.00: cmd 61/08:28:d8:c2:cb/00:00:02:00:00/40 tag 5 ncq 4096 out [26081.212965] ata1.00: status: { DRDY } [26081.212969] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212979] ata1.00: cmd 61/08:30:10:c0:87/00:00:14:00:00/40 tag 6 ncq 4096 out [26081.212984] ata1.00: status: { DRDY } [26081.212989] ata1.00: failed command: WRITE FPDMA QUEUED [26081.212993] ata1.00: cmd 61/08:38:30:c0:47/00:00:2f:00:00/40 tag 7 ncq 4096 out [26081.212995] ata1.00: status: { DRDY } [26081.212997] ata1.00: failed command: WRITE FPDMA QUEUED [26081.213000] ata1.00: cmd 61/08:40:f8:e2:2f/00:00:0c:00:00/40 tag 8 ncq 4096 out [26081.213002] ata1.00: status: { DRDY } [26081.213006] ata1: hard resetting link [26081.532854] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [26081.533667] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [26081.534168] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [26081.534249] ata1.00: configured for UDMA/133 [26081.548968] ata1.00: device reported invalid CHS sector 0 [26081.548976] ata1.00: device reported invalid CHS sector 0 [26081.548981] ata1.00: device reported invalid CHS sector 0 [26081.548985] ata1.00: device reported invalid CHS sector 0 [26081.548989] ata1.00: device reported invalid CHS sector 0 [26081.548992] ata1.00: device reported invalid CHS sector 0 [26081.548996] ata1.00: device reported invalid CHS sector 0 [26081.549000] ata1.00: device reported invalid CHS sector 0 [26081.549030] ata1: EH complete