Upon resuming fro suspend-to-RAM, my Inateck USB 3.0 Gigabit ethernet adapter stops working. Even after re-plugging the adapter, it is not possible to use it anymore until the next reboot. Unplugging it does not make eth0 disappear in ifconfig or lsusb either. The laptop is a Dell XPS15 9530 with kubuntu 13.10 When trying to connect using the network manager applet, I get a lot of the following messages: ... [12427.279283] ax88179_178a 4-2.1:1.0 eth0: Error submitting the control message: status=-19 [12427.279287] ax88179_178a 4-2.1:1.0 eth0: Error submitting the control message: status=-19 [12427.280192] ax88179_178a 4-2.1:1.0 eth0: Failed to read reg index 0x0000: -19 [12427.280200] ax88179_178a 4-2.1:1.0 eth0: Failed to read reg index 0x0001: -19 ... ---- Dmesg output after resume ----- [12245.798167] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [12245.798186] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [12247.610085] PM: Syncing filesystems ... done. [12247.801467] PM: Preparing system for mem sleep [12247.801783] Freezing user space processes ... (elapsed 0.001 seconds) done. [12247.803358] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12247.804471] PM: Entering mem sleep [12247.804864] Suspending console(s) (use no_console_suspend to debug) [12247.805185] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [12247.805212] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12247.805292] sd 0:0:0:0: [sda] Stopping disk [12247.810559] sd 1:0:0:0: [sdb] Stopping disk [12247.912189] mei_me 0000:00:16.0: suspend [12247.912208] Removing pn544 [12248.973009] PM: suspend of devices complete after 1166.836 msecs [12248.973222] PM: late suspend of devices complete after 0.210 msecs [12248.989132] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [12249.005099] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [12249.037039] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [12249.061037] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [12249.061113] PM: noirq suspend of devices complete after 87.801 msecs [12249.061427] ACPI: Preparing to enter system sleep state S3 [12249.061723] PM: Saving platform NVS memory [12249.067811] Disabling non-boot CPUs ... [12249.068051] Broke affinity for irq 52 [12249.069316] smpboot: CPU 1 is now offline [12249.173143] smpboot: CPU 2 is now offline [12249.277251] smpboot: CPU 3 is now offline [12249.381356] smpboot: CPU 4 is now offline [12249.381784] Broke affinity for irq 16 [12249.381793] Broke affinity for irq 45 [12249.485458] smpboot: CPU 5 is now offline [12249.485868] Broke affinity for irq 23 [12249.485870] Broke affinity for irq 42 [12249.589562] smpboot: CPU 6 is now offline [12249.589962] Broke affinity for irq 46 [12249.589965] Broke affinity for irq 48 [12249.693684] smpboot: CPU 7 is now offline [12249.695306] ACPI: Low-level resume complete [12249.695350] PM: Restoring platform NVS memory [12249.697240] Enabling non-boot CPUs ... [12249.697282] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12249.711811] CPU1 is up [12249.711831] smpboot: Booting Node 0 Processor 2 APIC 0x4 [12249.726349] CPU2 is up [12249.726368] smpboot: Booting Node 0 Processor 3 APIC 0x6 [12249.740875] CPU3 is up [12249.740894] smpboot: Booting Node 0 Processor 4 APIC 0x1 [12249.755342] CPU4 is up [12249.755358] smpboot: Booting Node 0 Processor 5 APIC 0x3 [12249.769798] CPU5 is up [12249.769813] smpboot: Booting Node 0 Processor 6 APIC 0x5 [12249.784255] CPU6 is up [12249.784270] smpboot: Booting Node 0 Processor 7 APIC 0x7 [12249.798733] CPU7 is up [12249.809220] ACPI: Waking up from system sleep state S3 [12249.809874] acpi LNXPOWER:01: Turning OFF [12249.809939] pcieport 0000:00:01.0: power state changed by ACPI to D0 [12249.845058] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [12249.861095] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [12249.893133] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [12249.925164] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [12249.941205] pci 0000:02:00.0: power state changed by ACPI to D0 [12249.957393] PM: noirq resume of devices complete after 147.347 msecs [12249.957517] PM: early resume of devices complete after 0.103 msecs [12249.957540] i915 0000:00:02.0: setting latency timer to 64 [12249.957556] xhci_hcd 0000:00:14.0: setting latency timer to 64 [12249.957584] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [12249.957620] ahci 0000:00:1f.2: setting latency timer to 64 [12249.957622] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [12249.957666] ehci-pci 0000:00:1a.0: setting latency timer to 64 [12249.957749] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [12249.957783] ehci-pci 0000:00:1d.0: setting latency timer to 64 [12249.965829] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1 [12249.965853] Probing NFC pn544 [12250.285512] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12250.286586] ata2.00: configured for UDMA/100 [12250.301661] sd 1:0:0:0: [sdb] Starting disk [12250.373766] usb 3-6: reset full-speed USB device number 4 using xhci_hcd [12250.390113] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88041935ac00 [12250.390114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88041935ac40 [12250.501903] usb 3-9: reset full-speed USB device number 5 using xhci_hcd [12250.518519] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880412c32c00 [12250.518520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880412c32c40 [12250.518521] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880412c32c80 [12250.518522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804134c7880 [12250.518522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804134c78c0 [12250.519181] btusb 3-9:1.0: no reset_resume for driver btusb? [12250.519182] btusb 3-9:1.1: no reset_resume for driver btusb? [12250.630020] usb 3-2: reset high-speed USB device number 2 using xhci_hcd [12250.646751] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880413f27d00 [12250.758084] usb 3-11: reset high-speed USB device number 6 using xhci_hcd [12250.824908] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804136bbc00 [12250.824909] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804136bbbc0 [12250.918248] usb 3-3: reset full-speed USB device number 3 using xhci_hcd [12250.935306] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804136bb880 [12250.935307] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804136bb8c0 [12250.935308] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804136bb900 [12251.602845] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [12252.239502] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12252.362750] ata1.00: configured for UDMA/133 [12252.375701] sd 0:0:0:0: [sda] Starting disk [12252.864123] pciehp 0000:00:1c.0:pcie04: Link Training Error occurs [12252.864124] pciehp 0000:00:1c.0:pcie04: Failed to check link status [12252.864198] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [12252.864208] PM: Device 00:09 failed to resume: error -19 [12252.870386] PM: resume of devices complete after 2909.951 msecs [12252.870971] PM: Finishing wakeup. [12252.870972] Restarting tasks ... done. [12252.883654] Bluetooth: hci0: read Intel version: 370710018002030d00 [12252.883660] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [12252.884345] usb 3-2.4: USB disconnect, device number 7 [12252.912528] FAT-fs (sdc1): unable to read boot sector to mark fs as dirty [12252.948301] video LNXVIDEO:00: Restoring backlight state [12252.948305] video LNXVIDEO:01: Restoring backlight state [12252.998857] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [12253.106536] ax88179_178a 4-2.1:1.0 eth0: Failed to read reg index 0x0001: -19 [12253.106542] ax88179_178a 4-2.1:1.0 eth0: Failed to write reg index 0x0001: -19 [12254.225800] usb 3-2.4: new high-speed USB device number 9 using xhci_hcd [12254.242658] usb 3-2.4: New USB device found, idVendor=07ab, idProduct=fc88 [12254.242668] usb 3-2.4: New USB device strings: Mfr=3, Product=11, SerialNumber=5 [12254.242673] usb 3-2.4: Product: Freecom Mobile Drive XXS [12254.242677] usb 3-2.4: Manufacturer: Freecom [12254.242681] usb 3-2.4: SerialNumber: 33051F14AA94 [12254.243815] usb-storage 3-2.4:1.0: USB Mass Storage device detected [12254.244069] scsi8 : usb-storage 3-2.4:1.0 [12255.243012] scsi 8:0:0:0: Direct-Access Freecom Mobile Drive XXS PQ: 0 ANSI: 2 CCS [12255.243482] sd 8:0:0:0: Attached scsi generic sg2 type 0 [12255.243721] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [12255.244105] sd 8:0:0:0: [sdc] Write Protect is off [12255.244112] sd 8:0:0:0: [sdc] Mode Sense: 34 00 00 00 [12255.244501] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [12255.266633] sdc: sdc1 [12255.266639] sdc: p1 size 976784067 extends beyond EOD, enabling native capacity [12255.268156] sdc: sdc1 [12255.268158] sdc: p1 size 976784067 extends beyond EOD, truncated [12255.269257] sd 8:0:0:0: [sdc] Attached SCSI disk [12257.672910] ------------[ cut here ]------------ [12257.672928] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.11.0/net/sched/sch_generic.c:260 dev_watchdog+0x26a/0x280() [12257.672933] NETDEV WATCHDOG: eth0 (ax88179_178a): transmit queue 0 timed out [12257.672936] Modules linked in: usb_storage pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) parport_pc ppdev rfcomm bnep nls_iso8859_1 ax88179_178a usbnet arc4 mii x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev uvcvideo videobuf2_vmalloc videobuf2_memops hid_multitouch videobuf2_core videodev iwlmvm mac80211 pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap dell_laptop dcdbas microcode snd_hda_codec_realtek snd_hda_codec_hdmi psmouse btusb serio_raw bluetooth iwlwifi snd_hda_intel cfg80211 snd_hda_codec snd_hwdep lpc_ich snd_pcm snd_seq_midi snd_seq_midi_event mei_me snd_page_alloc mei snd_rawmidi snd_seq snd_seq_device snd_timer snd mac_hid soundcore lp parport hid_logitech_dj usbhid hid nouveau i915 mxm_wmi ttm i2c_algo_bit ahci drm_kms_helper libahci drm rtsx_pci wmi video [12257.673060] CPU: 0 PID: 0 Comm: swapper/0 Tainted: GF O 3.11.0-15-generic #23-Ubuntu [12257.673063] Hardware name: Dell Inc. XPS 15 9530/XPS 15 9530, BIOS A01 10/17/2013 [12257.673067] 0000000000000009 ffff88042fa03d60 ffffffff816e7335 ffff88042fa03da8 [12257.673075] ffff88042fa03d98 ffffffff81061dcd ffff880416a1c000 0000000000000000 [12257.673082] 0000000000000000 ffff880413d9b080 ffff880413d9b000 ffff88042fa03df8 [12257.673089] Call Trace: [12257.673092] [] dump_stack+0x45/0x56 [12257.673116] [] warn_slowpath_common+0x7d/0xa0 [12257.673123] [] warn_slowpath_fmt+0x4c/0x50 [12257.673130] [] dev_watchdog+0x26a/0x280 [12257.673138] [] ? dev_deactivate_queue.constprop.32+0x60/0x60 [12257.673148] [] call_timer_fn+0x36/0x110 [12257.673154] [] ? dev_deactivate_queue.constprop.32+0x60/0x60 [12257.673163] [] run_timer_softirq+0x1fd/0x2b0 [12257.673170] [] __do_softirq+0xf7/0x240 [12257.673177] [] call_softirq+0x1c/0x30 [12257.673189] [] do_softirq+0x55/0x90 [12257.673195] [] irq_exit+0xb5/0xc0 [12257.673202] [] smp_apic_timer_interrupt+0x45/0x60 [12257.673212] [] apic_timer_interrupt+0x6d/0x80 [12257.673214] [] ? cpuidle_enter_state+0x52/0xc0 [12257.673231] [] ? cpuidle_enter_state+0x48/0xc0 [12257.673238] [] cpuidle_idle_call+0xc9/0x210 [12257.673246] [] arch_cpu_idle+0xe/0x30 [12257.673256] [] cpu_startup_entry+0xe5/0x280 [12257.673265] [] rest_init+0x77/0x80 [12257.673275] [] start_kernel+0x40a/0x416 [12257.673281] [] ? repair_env_string+0x5c/0x5c [12257.673288] [] ? early_idt_handlers+0x120/0x120 [12257.673294] [] x86_64_start_reservations+0x2a/0x2c [12257.673300] [] x86_64_start_kernel+0x108/0x117 [12257.673305] ---[ end trace 30f4938add52146a ]--- ---- End dmesg ----- ---- lsusb output (after unplugging adapter ---- Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 003: ID 0b95:1790 ASIX Electronics Corp. Bus 004 Device 002: ID 2109:0812 Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 005: ID 8087:07dc Intel Corp. Bus 003 Device 004: ID 06cb:0ac3 Synaptics, Inc. Bus 003 Device 012: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 003 Device 013: ID 07ab:fc88 Freecom Technologies Bus 003 Device 006: ID 0bda:573c Realtek Semiconductor Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ---- End lsusb -----