[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.15.0-24-generic (buildd@lgw01-amd64-056) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #26-Ubuntu SMP Wed Jun 13 08:44:47 UTC 2018 (Ubuntu 4.15.0-24.26-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-24-generic root=UUID=707352fe-736d-407b-94fb-b6c279d31f7a ro nomdmonddf nomdmonisw pti=off
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c74affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c74b0000-0x00000000c74b6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c74b7000-0x00000000c83cefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c83cf000-0x00000000c8c7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c8c80000-0x00000000daea1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daea2000-0x00000000daf2ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daf30000-0x00000000daf95fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daf96000-0x00000000db0dafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000db0db000-0x00000000dbf3afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbf3b000-0x00000000dbffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xdb09e000  ACPI=0xdb09e000  SMBIOS=0xf04c0  MPS=0xfd460 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z97X-UD5H/Z97X-UD5H, BIOS F6 05/07/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 041FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 16334M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd750-0x000fd75f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Kernel/User page tables isolation: disabled on command line.
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1e5b3f000, 0x1e5b3ffff] PGTABLE
[    0.000000] BRK [0x1e5b40000, 0x1e5b40fff] PGTABLE
[    0.000000] BRK [0x1e5b41000, 0x1e5b41fff] PGTABLE
[    0.000000] BRK [0x1e5b42000, 0x1e5b42fff] PGTABLE
[    0.000000] BRK [0x1e5b43000, 0x1e5b43fff] PGTABLE
[    0.000000] BRK [0x1e5b44000, 0x1e5b44fff] PGTABLE
[    0.000000] BRK [0x1e5b45000, 0x1e5b45fff] PGTABLE
[    0.000000] BRK [0x1e5b46000, 0x1e5b46fff] PGTABLE
[    0.000000] BRK [0x1e5b47000, 0x1e5b47fff] PGTABLE
[    0.000000] BRK [0x1e5b48000, 0x1e5b48fff] PGTABLE
[    0.000000] BRK [0x1e5b49000, 0x1e5b49fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31125000-0x34889fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DB09E000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DB09E080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DB0AF938 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DB09E1A0 011791 (v02 ALASKA A M I    00000088 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DB0D9080 000040
[    0.000000] ACPI: APIC 0x00000000DB0AFA48 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DB0AFAE0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DB0AFB28 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DB0B0718 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DB0B0C58 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000DB0B17D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DB0B1810 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DB0B1848 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DB0B1BB8 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000DB0B7718 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x00000000DB0B7750 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41fdd5000-0x41fdfffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c74affff]
[    0.000000]   node   0: [mem 0x00000000c74b7000-0x00000000c83cefff]
[    0.000000]   node   0: [mem 0x00000000c8c80000-0x00000000daea1fff]
[    0.000000]   node   0: [mem 0x00000000daf30000-0x00000000daf95fff]
[    0.000000]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[    0.000000] On node 0 totalpages: 4170734
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13914 pages used for memmap
[    0.000000]   DMA32 zone: 890449 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3276288 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc74b0000-0xc74b6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc83cf000-0xc8c7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaea2000-0xdaf2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf96000-0xdb0dafff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb0db000-0xdbf3afff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbf3b000-0xdbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4105538
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-24-generic root=UUID=707352fe-736d-407b-94fb-b6c279d31f7a ro nomdmonddf nomdmonisw pti=off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16035516K/16682936K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 647420K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 39092 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000dbe7d000 end: 0x000000dbe8bfff
[    0.000000] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3592.016 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7184.03 BogoMIPS (lpj=14368064)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.028366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028405] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028437] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028575] CPU: Physical Processor ID: 0
[    0.028577] CPU: Processor Core ID: 0
[    0.028583] mce: CPU supports 9 MCE banks
[    0.028590] CPU0: Thermal monitoring enabled (TM1)
[    0.028599] process: using mwait in idle threads
[    0.028602] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.028603] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.028605] Spectre V2 : Mitigation: Full generic retpoline
[    0.028606] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028607] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028609] Speculative Store Bypass: Vulnerable
[    0.028952] Freeing SMP alternatives memory: 36K
[    0.033370] TSC deadline timer enabled
[    0.033372] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.033415] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.033437] ... version:                3
[    0.033439] ... bit width:              48
[    0.033440] ... generic registers:      4
[    0.033441] ... value mask:             0000ffffffffffff
[    0.033442] ... max period:             00007fffffffffff
[    0.033443] ... fixed-purpose events:   3
[    0.033444] ... event mask:             000000070000000f
[    0.033467] Hierarchical SRCU implementation.
[    0.034143] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034154] smp: Bringing up secondary CPUs ...
[    0.034195] x86: Booting SMP configuration:
[    0.034197] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.037095] smp: Brought up 1 node, 8 CPUs
[    0.037095] smpboot: Max logical packages: 1
[    0.037095] smpboot: Total of 8 processors activated (57472.25 BogoMIPS)
[    0.040357] devtmpfs: initialized
[    0.040357] x86/mm: Memory block size: 128MB
[    0.040767] evm: security.selinux
[    0.040768] evm: security.SMACK64
[    0.040769] evm: security.SMACK64EXEC
[    0.040771] evm: security.SMACK64TRANSMUTE
[    0.040772] evm: security.SMACK64MMAP
[    0.040773] evm: security.apparmor
[    0.040774] evm: security.ima
[    0.040775] evm: security.capability
[    0.040785] PM: Registering ACPI NVS region [mem 0xc74b0000-0xc74b6fff] (28672 bytes)
[    0.040785] PM: Registering ACPI NVS region [mem 0xdaf96000-0xdb0dafff] (1331200 bytes)
[    0.040785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040785] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040785] pinctrl core: initialized pinctrl subsystem
[    0.040785] RTC time: 20:25:59, date: 07/12/18
[    0.040785] NET: Registered protocol family 16
[    0.040785] audit: initializing netlink subsys (disabled)
[    0.040785] audit: type=2000 audit(1531427159.040:1): state=initialized audit_enabled=0 res=1
[    0.040785] cpuidle: using governor ladder
[    0.040785] cpuidle: using governor menu
[    0.040785] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040785] ACPI: bus type PCI registered
[    0.040785] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040785] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040785] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040785] PCI: Using configuration type 1 for base access
[    0.040785] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.040836] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.040836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040837] ACPI: Added _OSI(Module Device)
[    0.040837] ACPI: Added _OSI(Processor Device)
[    0.040837] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040837] ACPI: Added _OSI(Processor Aggregator Device)
[    0.040837] ACPI: Added _OSI(Linux-Dell-Video)
[    0.040837] ACPI: Executed 15 blocks of module-level executable AML code
[    0.049558] ACPI: Dynamic OEM Table Load:
[    0.049558] ACPI: SSDT 0xFFFF9D158C860C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.049558] ACPI: Dynamic OEM Table Load:
[    0.049558] ACPI: SSDT 0xFFFF9D158CDCF000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.049558] ACPI: Dynamic OEM Table Load:
[    0.049558] ACPI: SSDT 0xFFFF9D158CF78A00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.050424] ACPI: Interpreter enabled
[    0.050450] ACPI: (supports S0 S3 S4 S5)
[    0.050452] ACPI: Using IOAPIC for interrupt routing
[    0.050477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.051120] ACPI: GPE 0x1E active on init
[    0.052004] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.052684] ACPI: Power Resource [PG00] (on)
[    0.052801] ACPI: Power Resource [PG01] (on)
[    0.052801] ACPI: Power Resource [PG02] (on)
[    0.067346] ACPI: Power Resource [FN00] (off)
[    0.067407] ACPI: Power Resource [FN01] (off)
[    0.067465] ACPI: Power Resource [FN02] (off)
[    0.067523] ACPI: Power Resource [FN03] (off)
[    0.067580] ACPI: Power Resource [FN04] (off)
[    0.068402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.068408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.068976] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.068979] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.069500] PCI host bridge to bus 0000:00
[    0.069503] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.069505] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.069507] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.069509] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.069511] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.069513] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.069515] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.069517] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.069520] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.069526] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.069601] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.069608] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.069612] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.069614] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.069623] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.069684] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.069690] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
[    0.069773] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.069790] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[    0.069833] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.069895] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.069913] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3d000-0xf7e3d00f 64bit]
[    0.069965] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.070048] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    0.070064] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[    0.070071] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
[    0.070078] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.070127] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.070189] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.070206] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
[    0.070265] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.070330] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.070345] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
[    0.070396] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.070460] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.070520] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.070623] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.070683] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.070783] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[    0.070844] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.070943] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[    0.071004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.071105] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.071122] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3a000-0xf7e3a3ff]
[    0.071182] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.071247] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.071396] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.071410] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.071416] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.071421] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.071428] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.071433] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.071440] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e39000-0xf7e397ff]
[    0.071469] pci 0000:00:1f.2: PME# supported from D3hot
[    0.071526] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.071540] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e38000-0xf7e380ff 64bit]
[    0.071557] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.071676] acpiphp: Slot [1] registered
[    0.071683] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.071827] pci 0000:02:00.0: [1969:e091] type 00 class 0x020000
[    0.071869] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit]
[    0.071894] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.072251] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084059] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.084063] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.084066] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.084162] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[    0.084539] pci 0000:03:00.0: supports D1 D2
[    0.084540] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084615] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.084752] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.084865] pci 0000:05:00.0: [1b4b:9172] type 00 class 0x010601
[    0.084890] pci 0000:05:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.084918] pci 0000:05:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.084945] pci 0000:05:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.084973] pci 0000:05:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.085001] pci 0000:05:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.085028] pci 0000:05:00.0: reg 0x24: [mem 0xf7c10000-0xf7c101ff]
[    0.085056] pci 0000:05:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[    0.085084] pci 0000:05:00.0: Enabling fixed DMA alias to 00.1
[    0.085195] pci 0000:05:00.0: PME# supported from D3hot
[    0.096018] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.096022] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.096025] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.096821] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
[    0.096872] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.096921] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 *10 11 12 14 15)
[    0.096969] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
[    0.097017] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 *10 11 12 14 15)
[    0.097064] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.097113] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 10 *11 12 14 15)
[    0.097160] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 11 12 14 15)
[    0.097550] SCSI subsystem initialized
[    0.097560] libata version 3.00 loaded.
[    0.097560] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.097560] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.097560] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.097560] vgaarb: loaded
[    0.097560] ACPI: bus type USB registered
[    0.097560] usbcore: registered new interface driver usbfs
[    0.097560] usbcore: registered new interface driver hub
[    0.097560] usbcore: registered new device driver usb
[    0.097560] EDAC MC: Ver: 3.0.0
[    0.097560] Registered efivars operations
[    0.119420] PCI: Using ACPI for IRQ routing
[    0.120601] PCI: pci_cache_line_size set to 64 bytes
[    0.120711] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.120711] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.120712] e820: reserve RAM buffer [mem 0xc74b0000-0xc7ffffff]
[    0.120713] e820: reserve RAM buffer [mem 0xc83cf000-0xcbffffff]
[    0.120713] e820: reserve RAM buffer [mem 0xdaea2000-0xdbffffff]
[    0.120714] e820: reserve RAM buffer [mem 0xdaf96000-0xdbffffff]
[    0.120715] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    0.120772] NetLabel: Initializing
[    0.120774] NetLabel:  domain hash size = 128
[    0.120775] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.120784] NetLabel:  unlabeled traffic allowed by default
[    0.120793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.120793] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.122054] clocksource: Switched to clocksource hpet
[    0.126942] VFS: Disk quotas dquot_6.6.0
[    0.126955] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.127023] AppArmor: AppArmor Filesystem Enabled
[    0.127039] pnp: PnP ACPI init
[    0.127134] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.127139] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.127209] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.127213] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127227] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.127254] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.127258] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.127386] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.127389] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.127391] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.127394] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127548] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.127552] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127582] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.127980] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.127983] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.127985] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.127987] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.127989] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.127991] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.127993] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.127995] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.127997] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.127999] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.128010] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.128013] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128183] pnp: PnP ACPI: found 8 devices
[    0.133790] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.133831] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.133841] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.133844] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.133849] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.133856] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.133878] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.133887] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.133890] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.133895] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.133903] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.133904] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.133905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.133905] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.133906] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.133907] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.133908] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.133909] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window]
[    0.133910] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.133911] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.133912] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.133913] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.134022] NET: Registered protocol family 2
[    0.134154] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.134279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.134386] TCP: Hash tables configured (established 131072 bind 65536)
[    0.134413] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.134447] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.134502] NET: Registered protocol family 1
[    0.134511] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.134519] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    0.134665] pci 0000:00:1a.0: enabling device (0000 -> 0002)
[    0.134783] pci 0000:00:1d.0: enabling device (0000 -> 0002)
[    0.134891] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.134941] PCI: CLS 64 bytes, default 64
[    0.134963] Unpacking initramfs...
[    0.651192] Freeing initrd memory: 56724K
[    0.651236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.651240] software IO TLB [mem 0xc34b0000-0xc74b0000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.651525] Scanning for low memory corruption every 60 seconds
[    0.651966] Initialise system trusted keyrings
[    0.651974] Key type blacklist registered
[    0.651998] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.652663] zbud: loaded
[    0.652961] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.653045] fuse init (API version 7.26)
[    0.653965] Key type asymmetric registered
[    0.653967] Asymmetric key parser 'x509' registered
[    0.653986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.654013] io scheduler noop registered
[    0.654015] io scheduler deadline registered
[    0.654038] io scheduler cfq registered (default)
[    0.654643] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.654656] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[    0.654669] pcieport 0000:00:1c.3: Signaling PME with IRQ 28
[    0.654681] pcieport 0000:00:1c.6: Signaling PME with IRQ 29
[    0.654721] efifb: probing for efifb
[    0.654729] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.654731] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.654732] efifb: scrolling: redraw
[    0.654734] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.655734] Console: switching to colour frame buffer device 128x48
[    0.656694] fb0: EFI VGA frame buffer device
[    0.656709] intel_idle: MWAIT substates: 0x42120
[    0.656709] intel_idle: v0.4.1 model 0x3C
[    0.656894] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.656971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.657012] ACPI: Power Button [PWRB]
[    0.657050] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.657073] ACPI: Sleep Button [SLPB]
[    0.657101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.657130] ACPI: Power Button [PWRF]
[    0.657792] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.657940] thermal LNXTHERM:00: registered as thermal_zone0
[    0.657953] ACPI: Thermal Zone [TZ00] (28 C)
[    0.658161] thermal LNXTHERM:01: registered as thermal_zone1
[    0.658175] ACPI: Thermal Zone [TZ01] (30 C)
[    0.658288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.659489] Linux agpgart interface v0.103
[    0.660651] loop: module loaded
[    0.660752] libphy: Fixed MDIO Bus: probed
[    0.660762] tun: Universal TUN/TAP device driver, 1.6
[    0.660792] PPP generic driver version 2.4.2
[    0.660825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.660839] ehci-pci: EHCI PCI platform driver
[    0.660917] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.660932] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.661338] ehci-pci 0000:00:1a.0: debug port 2
[    0.665628] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.665636] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3b000
[    0.680069] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.680509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.680900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.681289] usb usb1: Product: EHCI Host Controller
[    0.681674] usb usb1: Manufacturer: Linux 4.15.0-24-generic ehci_hcd
[    0.682062] usb usb1: SerialNumber: 0000:00:1a.0
[    0.682612] hub 1-0:1.0: USB hub found
[    0.683002] hub 1-0:1.0: 2 ports detected
[    0.683589] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.683971] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.684399] ehci-pci 0000:00:1d.0: debug port 2
[    0.688671] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.688683] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3a000
[    0.704066] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.704499] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.704890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.705286] usb usb2: Product: EHCI Host Controller
[    0.705686] usb usb2: Manufacturer: Linux 4.15.0-24-generic ehci_hcd
[    0.706087] usb usb2: SerialNumber: 0000:00:1d.0
[    0.706652] hub 2-0:1.0: USB hub found
[    0.707053] hub 2-0:1.0: 2 ports detected
[    0.707552] ehci-platform: EHCI generic platform driver
[    0.707961] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.708396] ohci-pci: OHCI PCI platform driver
[    0.708795] ohci-platform: OHCI generic platform driver
[    0.709186] uhci_hcd: USB Universal Host Controller Interface driver
[    0.709686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.710070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.711519] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.711906] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.712015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.712394] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.712764] usb usb3: Product: xHCI Host Controller
[    0.713119] usb usb3: Manufacturer: Linux 4.15.0-24-generic xhci-hcd
[    0.713473] usb usb3: SerialNumber: 0000:00:14.0
[    0.713960] hub 3-0:1.0: USB hub found
[    0.714325] hub 3-0:1.0: 14 ports detected
[    0.717073] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.717421] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.717794] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.718147] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.718501] usb usb4: Product: xHCI Host Controller
[    0.718853] usb usb4: Manufacturer: Linux 4.15.0-24-generic xhci-hcd
[    0.719209] usb usb4: SerialNumber: 0000:00:14.0
[    0.719693] hub 4-0:1.0: USB hub found
[    0.720060] hub 4-0:1.0: 6 ports detected
[    0.721007] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.721361] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.721854] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.722425] mousedev: PS/2 mouse device common for all mice
[    0.723066] rtc_cmos 00:02: RTC can wake from S4
[    0.723552] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.723944] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.724344] i2c /dev entries driver
[    0.724742] device-mapper: uevent: version 1.0.3
[    0.725180] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.725563] intel_pstate: Intel P-state driver initializing
[    0.726420] ledtrig-cpu: registered to indicate activity on CPUs
[    0.726807] EFI Variables Facility v0.08 2004-May-17
[    0.753064] NET: Registered protocol family 10
[    0.755955] Segment Routing with IPv6
[    0.756383] NET: Registered protocol family 17
[    0.756852] Key type dns_resolver registered
[    0.757594] RAS: Correctable Errors collector initialized.
[    0.758015] microcode: sig=0x306c3, pf=0x2, revision=0x24
[    0.758530] microcode: Microcode Update Driver: v2.2.
[    0.758535] sched_clock: Marking stable (758526449, 0)->(743112897, 15413552)
[    0.759483] registered taskstats version 1
[    0.759894] Loading compiled-in X.509 certificates
[    0.761784] Loaded X.509 cert 'Build time autogenerated kernel key: f8416e9c94111a665d2364ad111156633cf58b6a'
[    0.762740] Couldn't get size: 0x800000000000000e
[    0.763163] MODSIGN: Couldn't get UEFI db list
[    0.765708] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    0.766834] Couldn't get size: 0x800000000000000e
[    0.767280] MODSIGN: Couldn't get UEFI dbx list
[    0.767712] zswap: loaded using pool lzo/zbud
[    0.770268] Key type big_key registered
[    0.770702] Key type trusted registered
[    0.772084] Key type encrypted registered
[    0.772508] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772933] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.773372] evm: HMAC attrs: 0x1
[    0.774291]   Magic number: 10:404:447
[    0.774823] rtc_cmos 00:02: setting system clock to 2018-07-12 20:26:00 UTC (1531427160)
[    0.775303] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.775740] EDD information not available.
[    0.777704] Freeing unused kernel memory: 2408K
[    0.820103] Write protecting the kernel read-only data: 20480k
[    0.821187] Freeing unused kernel memory: 2008K
[    0.824182] Freeing unused kernel memory: 1904K
[    0.828461] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.881887] pps_core: LinuxPPS API ver. 1 registered
[    0.882688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.884569] PTP clock support registered
[    0.886354] ahci 0000:00:1f.2: version 3.0
[    0.886547] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[    0.887412] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.889061] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.889062] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.897168] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [74:d4:35:e9:e6:65]
[    0.903691] alx 0000:02:00.0 lan: renamed from eth0
[    0.928856] scsi host0: ahci
[    0.929497] scsi host1: ahci
[    0.930114] scsi host2: ahci
[    0.930638] scsi host3: ahci
[    0.931192] scsi host4: ahci
[    0.931655] scsi host5: ahci
[    0.932140] ata1: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39100 irq 31
[    0.932546] ata2: DUMMY
[    0.932935] ata3: DUMMY
[    0.933320] ata4: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39280 irq 31
[    0.933718] ata5: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39300 irq 31
[    0.934108] ata6: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39380 irq 31
[    0.934814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.934868] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.934871] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    0.935084] scsi host6: ahci
[    0.935169] scsi host7: ahci
[    0.935203] ata7: SATA max UDMA/133 abar m512@0xf7c10000 port 0xf7c10100 irq 32
[    0.935206] ata8: SATA max UDMA/133 abar m512@0xf7c10000 port 0xf7c10180 irq 32
[    1.015514] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.016028] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.044038] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.051997] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.083636] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:e9:e6:67
[    1.084021] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.084443] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.085365] [drm] Memory usable by graphics device = 2048M
[    1.085579] e1000e 0000:00:19.0 modem: renamed from eth0
[    1.086225] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    1.086226] fb: switching to inteldrmfb from EFI VGA
[    1.086595] Console: switching to colour dummy device 80x25
[    1.086746] [drm] Replacing VGA console driver
[    1.092064] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.092066] [drm] Driver supports precise vblank timestamp query.
[    1.094130] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.096829] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.097827] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.098064] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.149004] [drm] Cannot find any crtc or sizes
[    1.172444] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    1.172448] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.172693] hub 1-1:1.0: USB hub found
[    1.172786] hub 1-1:1.0: 6 ports detected
[    1.200451] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.200457] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.200671] hub 2-1:1.0: USB hub found
[    1.200797] hub 2-1:1.0: 8 ports detected
[    1.204266] usb 3-3: New USB device found, idVendor=045b, idProduct=0209
[    1.204269] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.204614] hub 3-3:1.0: USB hub found
[    1.204635] hub 3-3:1.0: 4 ports detected
[    1.246969] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.246989] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.247062] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.247077] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.247291] ata1.00: supports DRM functions and may not be fully accessible
[    1.247650] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.247651] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.247655] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.248188] ata5.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[    1.248191] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.248831] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.248833] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.248836] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.249332] ata5.00: configured for UDMA/133
[    1.251235] ata7: SATA link down (SStatus 0 SControl 300)
[    1.252045] ata1.00: NCQ Send/Recv Log not supported
[    1.252048] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM01B6Q, max UDMA/133
[    1.252050] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.252361] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.252363] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.252366] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.257301] ata1.00: supports DRM functions and may not be fully accessible
[    1.262252] ata1.00: NCQ Send/Recv Log not supported
[    1.267370] ata1.00: configured for UDMA/133
[    1.267499] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.267735] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.267741] sd 0:0:0:0: [sda] Write Protect is off
[    1.267743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.267749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.267752] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.268829]  sda: sda1 sda2
[    1.269469] sd 0:0:0:0: [sda] supports TCG Opal
[    1.269472] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.281754] ata6.00: ATA-8: WDC WD25EZRX-00MMMB0, 80.00A80, max UDMA/133
[    1.281757] ata6.00: 4883781168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.282089] ata4.00: ATA-8: WDC WD25EZRX-00MMMB0, 80.00A80, max UDMA/133
[    1.282091] ata4.00: 4883781168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.287403] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.287405] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.287409] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.290263] ata4.00: configured for UDMA/133
[    1.290399] scsi 3:0:0:0: Direct-Access     ATA      WDC WD25EZRX-00M 0A80 PQ: 0 ANSI: 5
[    1.290506] sd 3:0:0:0: [sdb] 4883781168 512-byte logical blocks: (2.50 TB/2.27 TiB)
[    1.290519] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.290527] sd 3:0:0:0: [sdb] Write Protect is off
[    1.290539] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.290546] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.290555] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.290787] scsi 4:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
[    1.290979] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.290983] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    1.290990] sd 4:0:0:0: [sdc] Write Protect is off
[    1.290993] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.290999] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.291001] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.292497] ata6.00: configured for UDMA/133
[    1.292589] scsi 5:0:0:0: Direct-Access     ATA      WDC WD25EZRX-00M 0A80 PQ: 0 ANSI: 5
[    1.292686] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    1.292800] sd 5:0:0:0: [sdd] 4883781168 512-byte logical blocks: (2.50 TB/2.27 TiB)
[    1.292803] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[    1.292843] sd 5:0:0:0: [sdd] Write Protect is off
[    1.292846] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.292914] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.332182] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.332259]  sdd: sdd1 sdd2 sdd3 sdd4
[    1.332878] sd 5:0:0:0: [sdd] Attached SCSI disk
[    1.340074]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.340308] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.353863] usb 4-3: New USB device found, idVendor=045b, idProduct=0210
[    1.353875] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.355644] hub 4-3:1.0: USB hub found
[    1.355915] hub 4-3:1.0: 4 ports detected
[    1.367818]  sdc: sdc1
[    1.368010] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.411998] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.412684] ata8.00: ATA-10: WDC WD30EFRX-68N32N0, 82.00A82, max UDMA/133
[    1.412687] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.413441] ata8.00: configured for UDMA/133
[    1.413546] scsi 7:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68N 0A82 PQ: 0 ANSI: 5
[    1.413647] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.413650] sd 7:0:0:0: [sde] 4096-byte physical blocks
[    1.413655] sd 7:0:0:0: [sde] Write Protect is off
[    1.413657] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.413659] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    1.413672] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.426820] random: fast init done
[    1.454826]  sde: sde1
[    1.455009] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    1.615927] raid6: sse2x1   gen() 13044 MB/s
[    1.659939] tsc: Refined TSC clocksource calibration: 3591.682 MHz
[    1.659947] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a15be52, max_idle_ns: 440795280454 ns
[    1.663921] raid6: sse2x1   xor()  9093 MB/s
[    1.711922] raid6: sse2x2   gen() 15170 MB/s
[    1.759923] raid6: sse2x2   xor() 10015 MB/s
[    1.807921] raid6: sse2x4   gen() 18532 MB/s
[    1.855921] raid6: sse2x4   xor() 11588 MB/s
[    1.903935] raid6: avx2x1   gen() 25860 MB/s
[    1.951921] raid6: avx2x1   xor() 17561 MB/s
[    1.999920] raid6: avx2x2   gen() 29347 MB/s
[    2.047921] raid6: avx2x2   xor() 18326 MB/s
[    2.095922] raid6: avx2x4   gen() 34054 MB/s
[    2.143920] raid6: avx2x4   xor() 21356 MB/s
[    2.143922] raid6: using algorithm avx2x4 gen() 34054 MB/s
[    2.143934] raid6: .... xor() 21356 MB/s, rmw enabled
[    2.143935] raid6: using avx2x2 recovery algorithm
[    2.144767] xor: automatically using best checksumming function   avx       
[    2.145394] async_tx: api initialized (async)
[    2.149700] md/raid:md1: device sde1 operational as raid disk 1
[    2.149703] md/raid:md1: device sdd4 operational as raid disk 2
[    2.149704] md/raid:md1: device sdb4 operational as raid disk 3
[    2.149706] md/raid:md1: device sdc1 operational as raid disk 0
[    2.149899] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
[    2.149906] md1: Warning: Device sdd4 is misaligned
[    2.149908] md1: Warning: Device sdc1 is misaligned
[    2.149910] md1: Warning: Device sdc1 is misaligned
[    2.149928] md1: detected capacity change from 0 to 7438479654912
[    2.684181] clocksource: Switched to clocksource tsc
[    3.383698] Btrfs loaded, crc32c=crc32c-intel
[    3.557438] random: crng init done
[    3.667799] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.777957] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.831710] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.848132] systemd[1]: Detected architecture x86-64.
[    3.850417] systemd[1]: Set hostname to <serf>.
[    3.943457] systemd[1]: Created slice System Slice.
[    3.943544] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.943631] systemd[1]: Created slice system-postfix.slice.
[    3.943672] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.943734] systemd[1]: Listening on Journal Socket.
[    3.944113] systemd[1]: Starting Set the console keyboard layout...
[    3.944447] systemd[1]: Mounting RPC Pipe File System...
[    3.954952] EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
[    3.962167] RPC: Registered named UNIX socket transport module.
[    3.962170] RPC: Registered udp transport module.
[    3.962171] RPC: Registered tcp transport module.
[    3.962172] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.964644] lp: driver loaded but no devices found
[    3.966943] ppdev: user-space parallel port driver
[    3.975076] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.986319] it87: Found IT8721F chip at 0xa30, revision 4
[    3.986341] it87: Beeping is supported
[    3.986559] it87: Found IT8721F chip at 0xfff8, revision 15
[    3.986568] it87: Beeping is supported
[    3.991419] 8021q: 802.1Q VLAN Support v1.8
[    4.004374] systemd-journald[439]: Received request to flush runtime journal from PID 1
[    4.012261] systemd-journald[439]: File /var/log/journal/ec25954cbc3fb433140676c5548c5b81/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.060179] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.061342] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[    4.061347] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.061349] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.061353] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.061354] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    4.061357] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.061360] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.061361] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    4.061364] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.061367] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.061367] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.102758] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.102760] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.102760] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.102761] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.102761] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.119532] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    4.119693] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.119743] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    4.129345] AVX2 version of gcm_enc/dec engaged.
[    4.129346] AES CTR mode by8 optimization enabled
[    4.138035] snd_hda_codec_realtek hdaudioC1D2: ALC1150: SKU not ready 0x00000000
[    4.138537] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.138538] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.138539] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.138540] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    4.138541] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x11/0x1e
[    4.138541] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    4.138542] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    4.138543] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    4.138544] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    4.153527] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    4.153591] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    4.153659] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    4.153717] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    4.153780] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.153837] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.153874] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    4.153899] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    4.154012] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    4.154038] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    4.154062] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    4.154086] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    4.192022] intel_rapl: Found RAPL domain package
[    4.192024] intel_rapl: Found RAPL domain core
[    4.192024] intel_rapl: Found RAPL domain uncore
[    4.192025] intel_rapl: Found RAPL domain dram
[    4.215541] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    4.216048] XFS (md1): nobarrier option is deprecated, ignoring.
[    4.216490] XFS (md1): Mounting V4 Filesystem
[    4.542529] XFS (md1): Starting recovery (logdev: internal)
[    6.128853] XFS (md1): Ending recovery (logdev: internal)
[    6.175495] audit: type=1400 audit(1531427165.893:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=884 comm="apparmor_parser"
[    6.175508] audit: type=1400 audit(1531427165.893:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=880 comm="apparmor_parser"
[    6.175530] audit: type=1400 audit(1531427165.893:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=879 comm="apparmor_parser"
[    6.176377] audit: type=1400 audit(1531427165.897:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=889 comm="apparmor_parser"
[    6.176491] audit: type=1400 audit(1531427165.897:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=888 comm="apparmor_parser"
[    6.176517] audit: type=1400 audit(1531427165.897:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=887 comm="apparmor_parser"
[    6.176519] audit: type=1400 audit(1531427165.897:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=887 comm="apparmor_parser"
[    6.176528] audit: type=1400 audit(1531427165.897:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=887 comm="apparmor_parser"
[    6.177120] audit: type=1400 audit(1531427165.897:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=883 comm="apparmor_parser"
[    6.178337] audit: type=1400 audit(1531427165.897:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=882 comm="apparmor_parser"
[    6.210856] e1000e 0000:00:19.0 modem: changing MTU from 1500 to 1508
[    6.280711] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[    6.281850] alx 0000:02:00.0 lan: NIC Up: 1 Gbps Full
[    6.426985] systemd-journald[439]: File /var/log/journal/ec25954cbc3fb433140676c5548c5b81/user-1009.journal corrupted or uncleanly shut down, renaming and replacing.
[    6.480067] IPv6: ADDRCONF(NETDEV_UP): modem: link is not ready
[    6.480189] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[    6.484287] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.524477] IPv6: ADDRCONF(NETDEV_UP): modem.6: link is not ready
[    6.560549] PKCS#7 signature not signed with a trusted key
[    6.560557] wireguard: loading out-of-tree module taints kernel.
[    6.560623] wireguard: module verification failed: signature and/or required key missing - tainting kernel
[    6.561041] wireguard: WireGuard 0.0.20180708 loaded. See www.wireguard.com for information.
[    6.561042] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    6.670431] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    6.677555] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    6.678559] NFSD: starting 90-second grace period (net f00000a9)
[    6.734423] PKCS#7 signature not signed with a trusted key
[    6.739730] vboxdrv: Found 8 processor cores
[    6.756061] vboxdrv: TSC mode is Invariant, tentative frequency 3591670747 Hz
[    6.756062] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
[    6.759991] PKCS#7 signature not signed with a trusted key
[    6.760218] VBoxNetFlt: Successfully started.
[    6.763541] PKCS#7 signature not signed with a trusted key
[    6.763735] VBoxNetAdp: Successfully started.
[    6.769409] PKCS#7 signature not signed with a trusted key
[    6.769619] VBoxPciLinuxInit
[    6.771170] vboxpci: IOMMU not found (not registered)
[    9.209922] e1000e: modem NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[    9.209952] IPv6: ADDRCONF(NETDEV_CHANGE): modem: link becomes ready
[    9.210034] IPv6: ADDRCONF(NETDEV_CHANGE): modem.6: link becomes ready
[  107.091728] NET: Registered protocol family 24
[  107.131525] wan: renamed from ppp0
[  144.171269] systemd-journald[439]: File /var/log/journal/ec25954cbc3fb433140676c5548c5b81/user-1008.journal corrupted or uncleanly shut down, renaming and replacing.
[  808.485929] systemd-journald[439]: File /var/log/journal/ec25954cbc3fb433140676c5548c5b81/user-1002.journal corrupted or uncleanly shut down, renaming and replacing.