[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-34-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #49~precise1-Ubuntu SMP Wed Nov 13 18:05:00 UTC 2013 (Ubuntu 3.8.0-34.49~precise1-generic 3.8.13.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-34-generic.efi.signed root=UUID=8e841222-9826-40f5-9aba-d1949b774240 ro acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d81d3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d81d4000-0x00000000d81dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d81db000-0x00000000d8605fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8606000-0x00000000d88d5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d88d6000-0x00000000dad5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dad5f000-0x00000000dadd6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dadd7000-0x00000000dae04fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dae05000-0x00000000db47dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db47e000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xdade0000 ACPI=0xdade0000 SMBIOS=0xdbf6e518 MPS=0xdbadec18 [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB) [ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB) [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000629000) (5MB) [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000629000-0x0000000036104000) (858MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000036104000-0x0000000036106000) (0MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000036106000-0x0000000036108000) (0MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000036108000-0x000000003707c000) (15MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x000000003707c000-0x000000009e59e000) (1653MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000009e59e000-0x00000000d49f6000) (868MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000d49f6000-0x00000000d7f1d000) (53MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x00000000d7f1d000-0x00000000d80a0000) (1MB) [ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x00000000d80a0000-0x00000000d81d4000) (1MB) [ 0.000000] efi: mem14: type=10, attr=0xf, range=[0x00000000d81d4000-0x00000000d81db000) (0MB) [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000d81db000-0x00000000d8329000) (1MB) [ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x00000000d8329000-0x00000000d85c5000) (2MB) [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000d85c5000-0x00000000d85e3000) (0MB) [ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x00000000d85e3000-0x00000000d85fd000) (0MB) [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000d85fd000-0x00000000d8606000) (0MB) [ 0.000000] efi: mem20: type=6, attr=0x800000000000000f, range=[0x00000000d8606000-0x00000000d88d6000) (2MB) [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000d88d6000-0x00000000d88e6000) (0MB) [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000d88e6000-0x00000000d88f3000) (0MB) [ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x00000000d88f3000-0x00000000d88f5000) (0MB) [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d88f5000-0x00000000d94ad000) (11MB) [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000d94ad000-0x00000000d9622000) (1MB) [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000d9622000-0x00000000d9640000) (0MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000d9640000-0x00000000da4fe000) (14MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000da4fe000-0x00000000da961000) (4MB) [ 0.000000] efi: mem29: type=2, attr=0xf, range=[0x00000000da961000-0x00000000da965000) (0MB) [ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x00000000da965000-0x00000000dad5f000) (3MB) [ 0.000000] efi: mem31: type=0, attr=0xf, range=[0x00000000dad5f000-0x00000000dad7a000) (0MB) [ 0.000000] efi: mem32: type=0, attr=0xf, range=[0x00000000dad7a000-0x00000000dadd7000) (0MB) [ 0.000000] efi: mem33: type=9, attr=0xf, range=[0x00000000dadd7000-0x00000000dade0000) (0MB) [ 0.000000] efi: mem34: type=9, attr=0xf, range=[0x00000000dade0000-0x00000000dae05000) (0MB) [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000dae05000-0x00000000daf57000) (1MB) [ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000daf57000-0x00000000db47e000) (5MB) [ 0.000000] efi: mem37: type=6, attr=0x800000000000000f, range=[0x00000000db47e000-0x00000000db97f000) (5MB) [ 0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x00000000db97f000-0x00000000db981000) (0MB) [ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000db981000-0x00000000db982000) (0MB) [ 0.000000] efi: mem40: type=6, attr=0x800000000000000f, range=[0x00000000db982000-0x00000000dbf70000) (5MB) [ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000dbf70000-0x00000000dbf97000) (0MB) [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000dbf97000-0x00000000dbfff000) (0MB) [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000dbfff000-0x00000000dc000000) (0MB) [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x0000000100000000-0x000000019fe00000) (2558MB) [ 0.000000] efi: mem45: type=0, attr=0x0, range=[0x00000000dd000000-0x00000000df200000) (34MB) [ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB) [ 0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) [ 0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB) [ 0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) [ 0.000000] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: TOSHIBA Satellite P55-A/VG10ST, BIOS 1.40 10/09/2013 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7F80000000 write-back [ 0.000000] 2 base 0180000000 mask 7FE0000000 write-back [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 5 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 019FE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 2GB, type WB [ 0.000000] reg 2, base: 6GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 5, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 6, base: 6654MB, range: 2MB, type UC [ 0.000000] total RAM covered: 6094M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 5, base: 4GB, range: 2GB, type WB [ 0.000000] reg 6, base: 6GB, range: 512MB, type WB [ 0.000000] reg 7, base: 6654MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdbffffff] [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xdbffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xdbffffff @ [mem 0x1fffe000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff] [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G [ 0.000000] [mem 0x180000000-0x19fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xda963000-0xda964fff] [ 0.000000] RAMDISK: [mem 0x36108000-0x3707bfff] [ 0.000000] ACPI: RSDP 00000000dade0000 00024 (v02 TOSASU) [ 0.000000] ACPI: XSDT 00000000dade0090 000A4 (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000dae00fd0 0010C (v05 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20121018/tbfadt-201) [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe0Block: 256/255 (20121018/tbfadt-567) [ 0.000000] ACPI: DSDT 00000000dade01c8 20E07 (v02 TOSASU TOSASU00 00000000 INTL 20120711) [ 0.000000] ACPI: FACS 00000000db47b080 00040 [ 0.000000] ACPI: APIC 00000000dae010e0 00072 (v03 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000dae01158 00044 (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 00000000dae011a0 000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000005) [ 0.000000] ACPI: SLIC 00000000dae01268 00176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001) [ 0.000000] ACPI: MSDM 00000000dae013e0 00055 (v03 TOSASU TOSASU00 06222004 MSFT 00010013) [ 0.000000] ACPI: LPIT 00000000dae01438 0005C (v01 TOSASU TOSASU00 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000dae01498 00228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dae016c0 00557 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dae01c18 00AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dae026f0 00421 (v01 CtdpB CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: MCFG 00000000dae02b18 0003C (v01 TOSASU TOSASU00 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dae02b58 00038 (v01 TOSASU TOSASU00 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000dae02b90 00357 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dae02ee8 019B2 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 00000000dae048a0 00038 (v00 00000000 MSFT 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff] [ 0.000000] NODE_DATA [mem 0x19fdfb000-0x19fdfffff] [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x19fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xd81d3fff] [ 0.000000] node 0: [mem 0xd81db000-0xd8605fff] [ 0.000000] node 0: [mem 0xd88d6000-0xdad5efff] [ 0.000000] node 0: [mem 0xdbfff000-0xdbffffff] [ 0.000000] node 0: [mem 0x100000000-0x19fdfffff] [ 0.000000] On node 0 totalpages: 1550358 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13931 pages used for memmap [ 0.000000] DMA32 zone: 877598 pages, LIFO batch:31 [ 0.000000] Normal zone: 10232 pages used for memmap [ 0.000000] Normal zone: 644616 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: 0000000000058000 - 0000000000059000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d81d4000 - 00000000d81db000 [ 0.000000] PM: Registered nosave memory: 00000000d8606000 - 00000000d88d6000 [ 0.000000] PM: Registered nosave memory: 00000000dad5f000 - 00000000dadd7000 [ 0.000000] PM: Registered nosave memory: 00000000dadd7000 - 00000000dae05000 [ 0.000000] PM: Registered nosave memory: 00000000dae05000 - 00000000db47e000 [ 0.000000] PM: Registered nosave memory: 00000000db47e000 - 00000000dbfff000 [ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000dd000000 [ 0.000000] PM: Registered nosave memory: 00000000dd000000 - 00000000df200000 [ 0.000000] PM: Registered nosave memory: 00000000df200000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s84928 r8192 d21568 u524288 [ 0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1526125 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-34-generic.efi.signed root=UUID=8e841222-9826-40f5-9aba-d1949b774240 ro acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5979960k/6813696k available (7172k kernel code, 612264k absent, 221472k reserved, 6071k data, 1016k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:984 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2294.599 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.19 BogoMIPS (lpj=9178396) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.013884] Security Framework initialized [ 0.013894] AppArmor: AppArmor initialized [ 0.013895] Yama: becoming mindful. [ 0.014581] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016515] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.017288] Mount-cache hash table entries: 256 [ 0.017484] Initializing cgroup subsys cpuacct [ 0.017487] Initializing cgroup subsys memory [ 0.017494] Initializing cgroup subsys devices [ 0.017496] Initializing cgroup subsys freezer [ 0.017497] Initializing cgroup subsys blkio [ 0.017499] Initializing cgroup subsys perf_event [ 0.017502] Initializing cgroup subsys hugetlb [ 0.017532] CPU: Physical Processor ID: 0 [ 0.017534] CPU: Processor Core ID: 0 [ 0.017539] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.017539] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.018776] mce: CPU supports 7 MCE banks [ 0.018792] CPU0: Thermal monitoring enabled (TM1) [ 0.018803] process: using mwait in idle threads [ 0.018807] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.018807] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.018807] tlb_flushall_shift: 6 [ 0.018977] Freeing SMP alternatives: 24k freed [ 0.021251] ACPI: Core revision 20121018 [ 0.021254] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.021450] ACPI: Forced DSDT copy: length 0x20E07 copied locally, original unmapped [ 0.068688] ftrace: allocating 29364 entries in 115 pages [ 0.085829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.125493] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01) [ 0.125503] TSC deadline timer enabled [ 0.125507] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.125513] ... version: 3 [ 0.125514] ... bit width: 48 [ 0.125515] ... generic registers: 4 [ 0.125517] ... value mask: 0000ffffffffffff [ 0.125518] ... max period: 000000007fffffff [ 0.125519] ... fixed-purpose events: 3 [ 0.125521] ... event mask: 000000070000000f [ 0.141314] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.126931] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.170244] Brought up 4 CPUs [ 0.170248] smpboot: Total of 4 processors activated (18356.79 BogoMIPS) [ 0.175658] devtmpfs: initialized [ 0.176843] EVM: security.selinux [ 0.176845] EVM: security.SMACK64 [ 0.176846] EVM: security.capability [ 0.176909] PM: Registering ACPI NVS region [mem 0xd81d4000-0xd81dafff] (28672 bytes) [ 0.176912] PM: Registering ACPI NVS region [mem 0xdae05000-0xdb47dfff] (6787072 bytes) [ 0.177882] regulator-dummy: no parameters [ 0.177933] NET: Registered protocol family 16 [ 0.178128] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.178130] ACPI: bus type pci registered [ 0.178189] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.178192] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.188485] PCI: Using configuration type 1 for base access [ 0.189508] bio: create slab at 0 [ 0.189599] ACPI: Added _OSI(Module Device) [ 0.189601] ACPI: Added _OSI(Processor Device) [ 0.189603] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.189607] ACPI: Added _OSI(Processor Aggregator Device) [ 0.189609] ACPI: Added _OSI(Linux) [ 0.194010] ACPI: EC: EC description table is found, configuring boot EC [ 0.198934] ACPI: Executed 1 blocks of module-level executable AML code [ 0.207828] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.209006] ACPI: SSDT 00000000dadccc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.210112] ACPI: Dynamic OEM Table Load: [ 0.210115] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.210451] ACPI: SSDT 00000000dadcc618 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.211664] ACPI: Dynamic OEM Table Load: [ 0.211667] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.223558] ACPI: SSDT 00000000dadcbd98 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.224663] ACPI: Dynamic OEM Table Load: [ 0.224665] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.225665] ACPI: Interpreter enabled [ 0.225669] ACPI: (supports S0 S3 S4 S5) [ 0.225704] ACPI: Using IOAPIC for interrupt routing [ 0.267883] ACPI: EC: GPE = 0x2c, I/O: command/status = 0x66, data = 0x62 [ 0.268276] ACPI: No dock devices found. [ 0.268281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.268516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.268519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.269334] PCI host bridge to bus 0000:00 [ 0.269338] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.269341] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.269343] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.269345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.269347] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.269349] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.269351] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.269353] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.269355] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.269357] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.269359] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.269361] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.269363] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff] [ 0.269374] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.269429] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.269446] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.269456] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.269463] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.269526] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.269540] pci 0000:00:03.0: reg 10: [mem 0xf7d14000-0xf7d17fff 64bit] [ 0.269638] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.269664] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 0.269753] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.269783] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.269812] pci 0000:00:16.0: reg 10: [mem 0xf7d1d000-0xf7d1d01f 64bit] [ 0.269912] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.269956] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.269979] pci 0000:00:1b.0: reg 10: [mem 0xf7d10000-0xf7d13fff 64bit] [ 0.270074] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.270099] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.270194] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.270225] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.270320] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.270363] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.270394] pci 0000:00:1d.0: reg 10: [mem 0xf7d1b000-0xf7d1b3ff] [ 0.270521] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.270554] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.270732] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.270753] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 0.270764] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 0.270773] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 0.270784] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 0.270796] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.270805] pci 0000:00:1f.2: reg 24: [mem 0xf7d1a000-0xf7d1a7ff] [ 0.270863] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270885] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.270904] pci 0000:00:1f.3: reg 10: [mem 0xf7d19000-0xf7d190ff 64bit] [ 0.270940] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.271028] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.271175] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 [ 0.271265] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit] [ 0.271561] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.279044] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.279051] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.279080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.279166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.279348] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.279648] pci0000:00: ACPI _OSC control (0x18) granted [ 0.280451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.280502] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280643] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280692] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280738] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280783] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.280891] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.280896] vgaarb: loaded [ 0.280898] vgaarb: bridge control possible 0000:00:02.0 [ 0.281081] SCSI subsystem initialized [ 0.281083] ACPI: bus type scsi registered [ 0.281122] libata version 3.00 loaded. [ 0.281140] ACPI: bus type usb registered [ 0.281159] usbcore: registered new interface driver usbfs [ 0.281167] usbcore: registered new interface driver hub [ 0.281202] usbcore: registered new device driver usb [ 0.281309] PCI: Using ACPI for IRQ routing [ 0.283596] PCI: pci_cache_line_size set to 64 bytes [ 0.283645] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.283647] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.283649] e820: reserve RAM buffer [mem 0xd81d4000-0xdbffffff] [ 0.283651] e820: reserve RAM buffer [mem 0xd8606000-0xdbffffff] [ 0.283653] e820: reserve RAM buffer [mem 0xdad5f000-0xdbffffff] [ 0.283655] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff] [ 0.283741] NetLabel: Initializing [ 0.283742] NetLabel: domain hash size = 128 [ 0.283743] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.283753] NetLabel: unlabeled traffic allowed by default [ 0.283834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.283841] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.285852] Switching to clocksource hpet [ 0.291504] AppArmor: AppArmor Filesystem Enabled [ 0.291529] pnp: PnP ACPI init [ 0.291543] ACPI: bus type pnp registered [ 0.291614] pnp 00:00: [dma 4] [ 0.291634] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.291663] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.291809] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.291996] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.291999] system 00:03: [io 0xffff] has been reserved [ 0.292001] system 00:03: [io 0xffff] has been reserved [ 0.292004] system 00:03: [io 0xffff] has been reserved [ 0.292006] system 00:03: [io 0x1c00-0x1cfe] has been reserved [ 0.292008] system 00:03: [io 0x1d00-0x1dfe] has been reserved [ 0.292010] system 00:03: [io 0x1e00-0x1efe] has been reserved [ 0.292013] system 00:03: [io 0x1f00-0x1ffe] has been reserved [ 0.292015] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.292017] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.292020] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292050] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.292113] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.292116] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.292168] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.292171] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292241] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.292244] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292313] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.292316] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.292318] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.292321] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292399] pnp 00:09: Plug and Play ACPI device, IDs TOS1150 TOS0310 PNP0f13 (active) [ 0.292445] pnp 00:0a: Plug and Play ACPI device, IDs TOS1103 PNPc030 PNP0303 (active) [ 0.292476] system 00:0b: [io 0x0240-0x0259] has been reserved [ 0.292479] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293252] system 00:0c: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.293256] system 00:0c: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.293258] system 00:0c: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.293261] system 00:0c: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.293263] system 00:0c: [mem 0xfe111000-0xfe111007] has been reserved [ 0.293265] system 00:0c: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.293269] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293689] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.293692] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.293694] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.293697] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.293699] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.293701] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.293704] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.293706] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.293708] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved [ 0.293711] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.293713] system 00:0d: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.293716] system 00:0d: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.293719] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298149] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.298152] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.298155] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298414] pnp: PnP ACPI: found 15 devices [ 0.298415] ACPI: ACPI bus type pnp unregistered [ 0.305606] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.305611] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.305613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.305631] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.305633] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.305635] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.305641] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.305646] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.305649] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.305652] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.305656] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.305661] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.305666] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.305675] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.305681] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.305714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.305716] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.305718] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.305720] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.305722] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.305724] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.305726] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 0.305728] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.305730] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.305732] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.305734] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] [ 0.305736] pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff] [ 0.305739] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.305741] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.305743] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.305745] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.305779] NET: Registered protocol family 2 [ 0.305991] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.306210] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.306349] TCP: Hash tables configured (established 65536 bind 65536) [ 0.306374] TCP: reno registered [ 0.306390] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.306424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.306491] NET: Registered protocol family 1 [ 0.306504] pci 0000:00:02.0: Boot video device [ 0.306636] PCI: CLS 64 bytes, default 64 [ 0.306675] Trying to unpack rootfs image as initramfs... [ 0.652004] Freeing initrd memory: 15824k freed [ 0.654337] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.654343] software IO TLB [mem 0xd41d4000-0xd81d4000] (64MB) mapped at [ffff8800d41d4000-ffff8800d81d3fff] [ 0.654871] Initialise module verification [ 0.654918] audit: initializing netlink socket (disabled) [ 0.654932] type=2000 audit(1387384698.612:1): initialized [ 0.695873] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.697453] VFS: Disk quotas dquot_6.5.2 [ 0.697496] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697996] fuse init (API version 7.20) [ 0.698087] msgmni has been set to 11759 [ 0.698779] Key type asymmetric registered [ 0.698782] Asymmetric key parser 'x509' registered [ 0.698820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.698856] io scheduler noop registered [ 0.698858] io scheduler deadline registered (default) [ 0.698866] io scheduler cfq registered [ 0.699053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.699066] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.699123] efifb: probing for efifb [ 0.699494] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a000000, using 1920k, total 1920k [ 0.699497] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.699498] efifb: scrolling: redraw [ 0.699500] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.700881] Console: switching to colour frame buffer device 100x37 [ 0.702238] fb0: EFI VGA frame buffer device [ 0.702245] intel_idle: MWAIT substates: 0x11142120 [ 0.702246] intel_idle: v0.4 model 0x45 [ 0.702247] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.702249] intel_idle: unaware of model 0x45 MWAIT 5 please contact lenb@kernel.org [ 0.702251] intel_idle: unaware of model 0x45 MWAIT 6 please contact lenb@kernel.org [ 0.702252] intel_idle: unaware of model 0x45 MWAIT 7 please contact lenb@kernel.org [ 0.705830] ACPI: AC Adapter [AC0] (on-line) [ 0.705998] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.709724] ACPI: Lid Switch [LID] [ 0.709771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.709780] ACPI: Power Button [SLPB] [ 0.709818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.709822] ACPI: Power Button [PWRF] [ 0.709937] ACPI: Requesting acpi_cpufreq [ 0.734040] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.734043] ACPI: Thermal Zone [THRM] (41 C) [ 0.734090] GHES: HEST is not enabled! [ 0.734162] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.736459] Linux agpgart interface v0.103 [ 0.737864] brd: module loaded [ 0.738594] loop: module loaded [ 0.738912] libphy: Fixed MDIO Bus: probed [ 0.738971] tun: Universal TUN/TAP device driver, 1.6 [ 0.738973] tun: (C) 1999-2004 Max Krasnyansky [ 0.739016] PPP generic driver version 2.4.2 [ 0.739064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.739065] ehci-pci: EHCI PCI platform driver [ 0.739119] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.739123] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.739129] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.739148] ehci-pci 0000:00:1d.0: debug port 2 [ 0.743062] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.743080] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000 [ 0.753644] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.753664] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.753667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.753670] usb usb1: Product: EHCI Host Controller [ 0.753673] usb usb1: Manufacturer: Linux 3.8.0-34-generic ehci_hcd [ 0.753676] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.753882] hub 1-0:1.0: USB hub found [ 0.753886] hub 1-0:1.0: 2 ports detected [ 0.754003] ehci-platform: EHCI generic platform driver [ 0.754011] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.754024] uhci_hcd: USB Universal Host Controller Interface driver [ 0.754076] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.754080] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.754085] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.754200] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.754250] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X [ 0.754310] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.754312] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.754314] usb usb2: Product: xHCI Host Controller [ 0.754316] usb usb2: Manufacturer: Linux 3.8.0-34-generic xhci_hcd [ 0.754318] usb usb2: SerialNumber: 0000:00:14.0 [ 0.754430] xHCI xhci_add_endpoint called for root hub [ 0.754432] xHCI xhci_check_bandwidth called for root hub [ 0.754452] hub 2-0:1.0: USB hub found [ 0.754464] hub 2-0:1.0: 9 ports detected [ 0.754508] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754514] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754522] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS01._PLD] (Node ffff8801968a45f0), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754569] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754574] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754579] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS02._PLD] (Node ffff8801968a46b8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754623] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754627] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754632] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS03._PLD] (Node ffff8801968a4780), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754678] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754682] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754688] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS04._PLD] (Node ffff8801968a4848), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754734] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754738] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754743] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS05._PLD] (Node ffff8801968a4910), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754823] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754827] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754832] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS06._PLD] (Node ffff8801968a49d8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754965] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.754969] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.754974] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS08._PLD] (Node ffff8801968a4b68), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755024] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.755028] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755033] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS09._PLD] (Node ffff8801968a4c30), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755121] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.755125] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.755146] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.755148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755150] usb usb3: Product: xHCI Host Controller [ 0.755152] usb usb3: Manufacturer: Linux 3.8.0-34-generic xhci_hcd [ 0.755154] usb usb3: SerialNumber: 0000:00:14.0 [ 0.755243] xHCI xhci_add_endpoint called for root hub [ 0.755244] xHCI xhci_check_bandwidth called for root hub [ 0.755264] hub 3-0:1.0: USB hub found [ 0.755273] hub 3-0:1.0: 4 ports detected [ 0.755311] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.755316] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755322] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS01._PLD] (Node ffff8801968a45f0), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755364] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.755368] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755383] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS02._PLD] (Node ffff8801968a46b8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755413] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.755416] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755420] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS03._PLD] (Node ffff8801968a4780), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755450] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20121018/exoparg2-418) [ 0.755452] ACPI Error: Method parse/execution failed [\_SB_.XPLD] (Node ffff8801968a5730), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.755456] ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS04._PLD] (Node ffff8801968a4848), AE_AML_PACKAGE_LIMIT (20121018/psparse-537) [ 0.761740] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.762477] ACPI: Battery Slot [BAT0] (battery present) [ 0.765608] i8042: Detected active multiplexing controller, rev 1.1 [ 0.770374] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.770378] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.770397] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.770408] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.770419] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.770507] mousedev: PS/2 mouse device common for all mice [ 0.770665] rtc_cmos 00:04: RTC can wake from S4 [ 0.770836] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.770872] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.770934] device-mapper: uevent: version 1.0.3 [ 0.770988] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.771055] cpuidle: using governor ladder [ 0.771151] cpuidle: using governor menu [ 0.771155] ledtrig-cpu: registered to indicate activity on CPUs [ 0.771156] EFI Variables Facility v0.08 2004-May-17 [ 0.775926] ashmem: initialized [ 0.776042] TCP: cubic registered [ 0.776123] NET: Registered protocol family 10 [ 0.776265] NET: Registered protocol family 17 [ 0.776273] Key type dns_resolver registered [ 0.776495] Loading module verification certificates [ 0.777273] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 253c4f779a04eefe395aecbd137448018b69410b' [ 0.777282] registered taskstats version 1 [ 0.778901] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779260] Key type trusted registered [ 0.780855] Key type encrypted registered [ 0.782786] rtc_cmos 00:04: setting system clock to 2013-12-18 16:38:19 UTC (1387384699) [ 0.783530] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.783531] EDD information not available. [ 0.784915] Freeing unused kernel memory: 1016k freed [ 0.785028] Write protecting the kernel read-only data: 12288k [ 0.787624] Freeing unused kernel memory: 1008k freed [ 0.790156] Freeing unused kernel memory: 1008k freed [ 0.800956] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 0.800960] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 0.803493] udevd[109]: starting version 175 [ 0.844716] Disabling lock debugging due to kernel taint [ 0.845418] ahci 0000:00:1f.2: version 3.0 [ 0.845487] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X [ 0.845541] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode [ 0.845545] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 0.845550] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.847092] scsi0 : ahci [ 0.848520] scsi1 : ahci [ 0.848616] scsi2 : ahci [ 0.848665] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 57 [ 0.848668] ata2: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a180 irq 57 [ 0.848669] ata3: DUMMY [ 0.998892] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 0.998897] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.065469] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.165425] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.165455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.166556] ata1.00: ATA-8: HGST HTS541075A9E680, JA2OA700, max UDMA/133 [ 1.166560] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.167729] ata1.00: configured for UDMA/133 [ 1.167851] scsi 0:0:0:0: Direct-Access ATA HGST HTS541075A9 JA2O PQ: 0 ANSI: 5 [ 1.168040] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208DB, TF01, max UDMA/100 [ 1.168078] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.168084] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.168087] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.168160] sd 0:0:0:0: [sda] Write Protect is off [ 1.168163] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.168200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.170838] ata2.00: configured for UDMA/100 [ 1.171574] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208DB TF01 PQ: 0 ANSI: 5 [ 1.174516] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.174519] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.174636] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.174713] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.197753] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.197756] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.197905] hub 1-1:1.0: USB hub found [ 1.198000] hub 1-1:1.0: 8 ports detected [ 1.198724] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.198727] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.232169] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 1.232890] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.365312] usb 2-4: new high-speed USB device number 2 using xhci_hcd [ 1.398613] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.398617] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.415108] usb 2-4: New USB device found, idVendor=058f, idProduct=6366 [ 1.415112] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.415115] usb 2-4: Product: Flash Card Reader/Writer [ 1.415116] usb 2-4: Manufacturer: Generic [ 1.415118] usb 2-4: SerialNumber: 058F63666485 [ 1.419587] Initializing USB Mass Storage driver... [ 1.419697] scsi3 : usb-storage 2-4:1.0 [ 1.419787] usbcore: registered new interface driver usb-storage [ 1.419789] USB Mass Storage support registered. [ 1.529215] usb 2-6: new high-speed USB device number 3 using xhci_hcd [ 1.577580] usb 2-6: New USB device found, idVendor=04ca, idProduct=7017 [ 1.577584] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.577586] usb 2-6: Product: TOSHIBA Web Camera - HD [ 1.577587] usb 2-6: Manufacturer: CECDAG3X4 [ 1.577589] usb 2-6: SerialNumber: 200901010001 [ 1.653144] tsc: Refined TSC clocksource calibration: 2294.685 MHz [ 1.653149] Switching to clocksource tsc [ 1.745115] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 1.763668] usb 2-7: New USB device found, idVendor=046d, idProduct=c049 [ 1.763671] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.763672] usb 2-7: Product: USB Gaming Mouse [ 1.763674] usb 2-7: Manufacturer: Logitech [ 1.763761] usb 2-7: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.768739] usbcore: registered new interface driver usbhid [ 1.768742] usbhid: USB HID core driver [ 1.770304] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input4 [ 1.770409] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:14.0-7/input0 [ 1.771083] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:14.0-7/input1 [ 1.833143] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 1.926341] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0a10 [ 1.926345] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.926347] usb 1-1.2: Product: Logitech Speaker [ 1.926348] usb 1-1.2: Manufacturer: Logitech [ 1.927248] input: Logitech Logitech Speaker as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input5 [ 1.927334] hid-generic 0003:046D:0A10.0003: input,hidraw2: USB HID v1.00 Device [ Logitech Logitech Speaker] on usb-0000:00:1d.0-1.2/input2 [ 1.997060] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 2.090873] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc [ 2.090877] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.301470] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.419551] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4 [ 2.420053] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.420687] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 3.554855] init: ureadahead main process (311) terminated with status 5 [ 4.600807] Adding 11717628k swap on /dev/sda7. Priority:-1 extents:1 across:11717628k [ 5.790962] udevd[460]: starting version 175 [ 6.645902] lp: driver loaded but no devices found [ 7.032459] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 7.160583] wmi: Mapper loaded [ 7.174046] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16 [ 7.184649] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 7.184736] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 7.241539] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20121018/utaddress-251) [ 7.241548] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIX 2 (20121018/utaddress-251) [ 7.241553] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 3 (20121018/utaddress-251) [ 7.241559] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.241564] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251) [ 7.241569] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251) [ 7.241573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.241576] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251) [ 7.241579] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251) [ 7.241584] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.241585] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.257421] Loading modules backported from Linux version v3.11-rc3-0-g5ae90d8 [ 7.257425] Backport generated by backports.git v3.11-rc3-1-0-g4e81a94 [ 7.336780] cfg80211: Calling CRDA to update world regulatory domain [ 7.337854] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16 [ 7.339188] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16 [ 7.340562] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16 [ 7.342073] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 7.443891] Bluetooth: Core ver 2.16 [ 7.443908] NET: Registered protocol family 31 [ 7.443910] Bluetooth: HCI device and connection manager initialized [ 7.443917] Bluetooth: HCI socket layer initialized [ 7.443919] Bluetooth: L2CAP socket layer initialized [ 7.443924] Bluetooth: SCO socket layer initialized [ 7.447218] mei 0000:00:16.0: setting latency timer to 64 [ 7.447265] mei 0000:00:16.0: irq 58 for MSI/MSI-X [ 7.447771] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 7.447773] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 7.647115] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 7.647119] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 7.683485] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 7.683489] Copyright(c) 2003-2013 Intel Corporation [ 7.683526] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 7.683628] iwlwifi 0000:02:00.0: irq 59 for MSI/MSI-X [ 7.698178] usbcore: registered new interface driver btusb [ 7.998415] iwlwifi 0000:02:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm [ 8.018365] [drm] Initialized drm 1.1.0 20060810 [ 8.304858] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2715, fw id: 1450925 [ 8.304863] psmouse serio4: synaptics: Toshiba Satellite P55-A detected, limiting rate to 40pps. [ 8.342797] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 8.568316] Linux video capture interface: v2.00 [ 8.760600] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 [ 8.760629] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 8.760785] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 8.760847] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 8.834058] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04ca:7017) [ 8.836738] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input7 [ 8.836846] usbcore: registered new interface driver uvcvideo [ 8.836849] USB Video Class driver (1.1.1) [ 8.980718] usbcore: registered new interface driver snd-usb-audio [ 9.348665] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.648656] cfg80211: World regulatory domain updated: [ 9.648660] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.648662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.648675] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.648677] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.648679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.648681] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.397977] type=1400 audit(1387402709.115:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=882 comm="apparmor_parser" [ 10.398012] type=1400 audit(1387402709.115:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=882 comm="apparmor_parser" [ 10.398045] type=1400 audit(1387402709.115:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=882 comm="apparmor_parser" [ 10.431465] type=1400 audit(1387402709.147:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=848 comm="apparmor_parser" [ 10.431507] type=1400 audit(1387402709.147:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=848 comm="apparmor_parser" [ 10.431541] type=1400 audit(1387402709.147:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=848 comm="apparmor_parser" [ 13.120401] init: failsafe main process (977) killed by TERM signal [ 14.442008] mei 0000:00:16.0: init hw failure. [ 14.442070] mei 0000:00:16.0: initialization failed. [ 14.443179] [drm] Memory usable by graphics device = 2048M [ 14.443184] checking generic (e0000000 1e0000) vs hw (e0000000 10000000) [ 14.443186] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 14.443217] Console: switching to colour dummy device 80x25 [ 14.443307] i915 0000:00:02.0: setting latency timer to 64 [ 14.464587] type=1400 audit(1387402713.183:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1045 comm="apparmor_parser" [ 14.464683] type=1400 audit(1387402713.183:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1045 comm="apparmor_parser" [ 14.464741] type=1400 audit(1387402713.183:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1045 comm="apparmor_parser" [ 14.492730] [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to a090 [ 14.493243] i915 0000:00:02.0: irq 58 for MSI/MSI-X [ 14.493261] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.493263] [drm] Driver supports precise vblank timestamp query. [ 14.493399] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.638935] ppdev: user-space parallel port driver [ 14.649894] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 14.677980] fbcon: inteldrmfb (fb0) is primary device [ 14.678375] Console: switching to colour frame buffer device 240x67 [ 14.678386] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.678388] i915 0000:00:02.0: registered panic notifier [ 14.678750] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.679454] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 14.679771] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 14.679798] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 14.679875] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 14.689890] Bluetooth: RFCOMM TTY layer initialized [ 14.689903] Bluetooth: RFCOMM socket layer initialized [ 14.689906] Bluetooth: RFCOMM ver 1.11 [ 14.696940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.696944] Bluetooth: BNEP filters: protocol multicast [ 14.696952] Bluetooth: BNEP socket layer initialized [ 14.774383] type=1400 audit(1387402713.495:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1044 comm="apparmor_parser" [ 14.847250] hda_codec: invalid CONNECT_LIST verb 5[0]:0 [ 14.847469] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 14.847697] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X [ 14.951126] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input10 [ 14.951214] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input11 [ 15.416515] audit_printk_skb: 6 callbacks suppressed [ 15.416519] type=1400 audit(1387402714.135:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1048 comm="apparmor_parser" [ 15.416818] type=1400 audit(1387402714.135:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1048 comm="apparmor_parser" [ 15.526057] type=1400 audit(1387402714.247:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1091 comm="apparmor_parser" [ 15.526350] type=1400 audit(1387402714.247:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1091 comm="apparmor_parser" [ 15.779061] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 15.779213] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 15.787425] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.787696] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.806265] type=1400 audit(1387402714.527:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1062 comm="apparmor_parser" [ 15.806519] type=1400 audit(1387402714.527:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1062 comm="apparmor_parser" [ 15.817373] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 18.459522] wlan0: authenticate with 14:35:8b:06:17:a8 [ 18.460262] wlan0: send auth to 14:35:8b:06:17:a8 (try 1/3) [ 18.462011] wlan0: authenticated [ 18.464351] wlan0: associate with 14:35:8b:06:17:a8 (try 1/3) [ 18.468134] wlan0: RX AssocResp from 14:35:8b:06:17:a8 (capab=0x411 status=0 aid=1) [ 18.468861] wlan0: associated [ 18.468884] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.468930] cfg80211: Calling CRDA for country: CN [ 18.472279] cfg80211: Regulatory domain changed to country: CN [ 18.472283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.472284] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 18.472286] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 19.889900] type=1400 audit(1387402718.611:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1046 comm="apparmor_parser" [ 19.890383] type=1400 audit(1387402718.611:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1046 comm="apparmor_parser" [ 19.890567] type=1400 audit(1387402718.611:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1046 comm="apparmor_parser" [ 19.890995] type=1400 audit(1387402718.615:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1046 comm="apparmor_parser" [ 20.488165] init: alsa-restore main process (1232) terminated with status 99