[   11.241438] wlan0: send auth to 9c:c7:a6:aa:75:39 (try 1/3)
[   11.244245] wlan0: authenticated
[   11.245040] wlan0: associate with 9c:c7:a6:aa:75:39 (try 1/3)
[   11.248097] wlan0: RX AssocResp from 9c:c7:a6:aa:75:39 (capab=0x411 status=0 aid=1)
[   11.248991] wlan0: associated
[   11.249021] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.249077] cfg80211: Calling CRDA for country: DE
[   11.251256] cfg80211: Regulatory domain changed to country: DE
[   11.251259] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.251260] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.251262] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.251263] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.251264] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[   11.251265] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   11.274325] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 9c:c7:a6:aa:75:39
[   12.448373] hid-multitouch 0003:1B96:0F04.0001: usb_submit_urb(ctrl) failed: -1
[   12.448385] hid-multitouch 0003:1B96:0F04.0001: timeout initializing reports
[   12.448605] input: N-trig DuoSense Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input15
[   12.449246] input: N-trig DuoSense as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
[   12.449383] hid-multitouch 0003:1B96:0F04.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [N-trig DuoSense] on usb-0000:00:14.0-5/input0
[   41.656182] usb 2-1: new high-speed USB device number 7 using xhci_hcd
[   41.694226] usb 2-1: New USB device found, idVendor=0480, idProduct=a004
[   41.694231] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[   41.694234] usb 2-1: Product: External USB HDD
[   41.694236] usb 2-1: Manufacturer: Toshiba
[   41.694238] usb 2-1: SerialNumber: 20110318146A
[   41.702694] usb-storage 2-1:1.0: USB Mass Storage device detected
[   41.703065] scsi1 : usb-storage 2-1:1.0
[   41.703136] usbcore: registered new interface driver usb-storage
[   45.906362] scsi 1:0:0:0: Direct-Access     Toshiba  External USB HDD      PQ: 0 ANSI: 4
[   45.906736] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   45.907293] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   45.913554] sd 1:0:0:0: [sdb] Write Protect is off
[   45.913559] sd 1:0:0:0: [sdb] Mode Sense: 38 00 00 00
[   45.919820] sd 1:0:0:0: [sdb] No Caching mode page found
[   45.919826] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   45.933130] sd 1:0:0:0: [sdb] No Caching mode page found
[   45.933135] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   45.958793]  sdb: sdb1
[   45.977146] sd 1:0:0:0: [sdb] No Caching mode page found
[   45.977151] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   45.977154] sd 1:0:0:0: [sdb] Attached SCSI disk
[   47.377294] systemd-hostnamed[2167]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2211.258764] systemd-hostnamed[7642]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[11770.310929] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[12395.501855] init: upstart-udev-bridge main process (351) terminated with status 1
[12395.501946] init: upstart-udev-bridge main process ended, respawning
[12395.502390] init: upstart-file-bridge main process (758) terminated with status 1
[12395.502452] init: upstart-file-bridge main process ended, respawning
[12395.502811] init: upstart-socket-bridge main process (761) terminated with status 1
[12395.502871] init: upstart-socket-bridge main process ended, respawning
[12399.174949] init: upstart-udev-bridge main process (17001) terminated with status 1
[12399.175037] init: upstart-udev-bridge main process ended, respawning
[12399.175424] init: upstart-socket-bridge main process (17009) terminated with status 1
[12399.175482] init: upstart-socket-bridge main process ended, respawning
[12399.175813] init: upstart-file-bridge main process (17012) terminated with status 1
[12399.175868] init: upstart-file-bridge main process ended, respawning
[12399.539154] init: upstart-udev-bridge main process (17105) terminated with status 1
[12399.539238] init: upstart-udev-bridge main process ended, respawning
[12399.539605] init: upstart-file-bridge main process (17117) terminated with status 1
[12399.539649] init: upstart-file-bridge main process ended, respawning
[12399.539913] init: upstart-socket-bridge main process (17122) terminated with status 1
[12399.539955] init: upstart-socket-bridge main process ended, respawning
[12400.066774] init: upstart-udev-bridge main process (17151) terminated with status 1
[12400.066838] init: upstart-udev-bridge main process ended, respawning
[12400.067166] init: upstart-file-bridge main process (17163) terminated with status 1
[12400.067207] init: upstart-file-bridge main process ended, respawning
[12400.067426] init: upstart-socket-bridge main process (17166) terminated with status 1
[12400.067460] init: upstart-socket-bridge main process ended, respawning
[15949.064351] show_signal_msg: 165 callbacks suppressed
[15949.064362] gnome-control-c[20871]: segfault at 40 ip 0000000000000040 sp 00007fff7f748218 error 14 in gnome-control-center[400000+e000]
[16204.508301] gnome-control-c[23565]: segfault at 40 ip 0000000000000040 sp 00007fffe5c7fef8 error 14 in gnome-control-center[400000+e000]
[16550.837833] systemd-hostnamed[25648]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[17067.136754] systemd-hostnamed[26147]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[17374.491012] systemd-hostnamed[27234]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[23041.706242] perf samples too long (5017 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[23508.340538] wlan0: deauthenticating from 9c:c7:a6:aa:75:39 by local choice (reason=3)
[23508.344862] cfg80211: Calling CRDA to update world regulatory domain
[23508.357516] cfg80211: World regulatory domain updated:
[23508.357525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23508.357529] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23508.357533] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23508.357537] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23508.357540] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23508.357543] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23509.850156] PM: Syncing filesystems ... done.
[23509.866190] PM: Preparing system for mem sleep
[23509.868479] Freezing user space processes ... (elapsed 0.001 seconds) done.
[23509.869760] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[23509.870506] PM: Entering mem sleep
[23509.870570] Suspending console(s) (use no_console_suspend to debug)
[23509.870904] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[23509.871455] sd 0:0:0:0: [sda] Stopping disk
[23509.882254] mei_me 0000:00:16.0: suspend
[23509.882274] Removing pn544
[23510.134323] PM: suspend of devices complete after 263.750 msecs
[23510.134480] PM: late suspend of devices complete after 0.154 msecs
[23510.150536] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[23510.182295] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[23510.214218] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[23510.214272] PM: noirq suspend of devices complete after 79.834 msecs
[23510.214640] ACPI: Preparing to enter system sleep state S3
[23510.216064] PM: Saving platform NVS memory
[23510.217015] Disabling non-boot CPUs ...
[23510.218588] smpboot: CPU 1 is now offline
[23510.322148] smpboot: CPU 2 is now offline
[23510.322682] Broke affinity for irq 23
[23510.322687] Broke affinity for irq 61
[23510.426088] smpboot: CPU 3 is now offline
[23510.428330] ACPI: Low-level resume complete
[23510.428397] PM: Restoring platform NVS memory
[23510.429054] Enabling non-boot CPUs ...
[23510.429096] smpboot: Booting Node 0 Processor 1 APIC 0x1
[23510.444033] CPU1 is up
[23510.444054] smpboot: Booting Node 0 Processor 2 APIC 0x2
[23510.458675] CPU2 is up
[23510.458693] smpboot: Booting Node 0 Processor 3 APIC 0x3
[23510.473107] CPU3 is up
[23510.477031] ACPI: Waking up from system sleep state S3
[23510.764429] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[23510.780443] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[23510.828446] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[23510.876464] PM: noirq resume of devices complete after 160.010 msecs
[23510.876583] PM: early resume of devices complete after 0.097 msecs
[23510.876604] i915 0000:00:02.0: setting latency timer to 64
[23510.876616] xhci_hcd 0000:00:14.0: setting latency timer to 64
[23510.876695] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[23510.876724] snd_hda_intel 0000:00:03.0: irq 66 for MSI/MSI-X
[23510.876861] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[23510.876900] ahci 0000:00:1f.2: setting latency timer to 64
[23510.876905] ehci-pci 0000:00:1d.0: setting latency timer to 64
[23510.886998] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[23510.887041] Probing NFC pn544
[23511.212206] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[23511.214076] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[23511.219575] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[23511.219768] ata1.00: configured for UDMA/133
[23511.232203] sd 0:0:0:0: [sda] Starting disk
[23511.292287] usb 2-5: reset full-speed USB device number 3 using xhci_hcd
[23511.308501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f906c80
[23512.331602] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88002c40f3a8 (20130517/exresop-502)
[23512.331605] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20130517/dswexec-461)
[23512.331611] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BTP] (Node ffff8802538f81b8), AE_AML_OPERAND_TYPE (20130517/psparse-536)
[23512.336081] PM: resume of devices complete after 1460.308 msecs
[23512.336232] PM: Finishing wakeup.
[23512.336233] Restarting tasks ... done.
[23512.344847] video LNXVIDEO:00: Restoring backlight state
[23512.476508] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[23512.476655] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[23512.484779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23512.743378] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[23513.363728] psmouse serio1: elantech: unknown hardware version, aborting...
[23513.531965] input: PS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input17
[23520.278282] wlan0: authenticate with 9c:c7:a6:aa:75:39
[23520.279495] wlan0: send auth to 9c:c7:a6:aa:75:39 (try 1/3)
[23520.281238] wlan0: authenticated
[23520.283162] wlan0: associate with 9c:c7:a6:aa:75:39 (try 1/3)
[23520.311460] wlan0: RX AssocResp from 9c:c7:a6:aa:75:39 (capab=0x411 status=0 aid=1)
[23520.312502] wlan0: associated
[23520.313231] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[23520.313424] cfg80211: Calling CRDA for country: DE
[23520.321678] cfg80211: Regulatory domain changed to country: DE
[23520.321686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23520.321691] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23520.321695] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23520.321698] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23520.321701] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[23520.321704] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[23520.386775] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 9c:c7:a6:aa:75:39
[23686.719043] mce: [Hardware Error]: Machine check events logged
[23934.591024] wlan0: deauthenticating from 9c:c7:a6:aa:75:39 by local choice (reason=3)
[23934.594866] cfg80211: Calling CRDA to update world regulatory domain
[23934.602471] cfg80211: World regulatory domain updated:
[23934.602481] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23934.602490] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23934.602497] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23934.602503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23934.602508] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23934.602514] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23935.950009] PM: Syncing filesystems ... done.
[23935.966500] PM: Preparing system for mem sleep
[23935.966768] Freezing user space processes ... (elapsed 0.001 seconds) done.
[23935.967982] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[23935.969167] PM: Entering mem sleep
[23935.969213] Suspending console(s) (use no_console_suspend to debug)
[23935.969491] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[23935.970052] sd 0:0:0:0: [sda] Stopping disk
[23935.980928] mei_me 0000:00:16.0: suspend
[23935.980947] Removing pn544
[23936.107326] PM: suspend of devices complete after 138.097 msecs
[23936.107438] PM: late suspend of devices complete after 0.110 msecs
[23936.123528] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[23936.155307] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[23936.183232] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[23936.183271] PM: noirq suspend of devices complete after 75.873 msecs
[23936.183528] ACPI: Preparing to enter system sleep state S3
[23936.184887] PM: Saving platform NVS memory
[23936.185602] Disabling non-boot CPUs ...
[23936.287166] smpboot: CPU 1 is now offline
[23936.391109] smpboot: CPU 2 is now offline
[23936.391516] Broke affinity for irq 23
[23936.391521] Broke affinity for irq 61
[23936.495047] smpboot: CPU 3 is now offline
[23936.497097] ACPI: Low-level resume complete
[23936.497163] PM: Restoring platform NVS memory
[23936.497796] Enabling non-boot CPUs ...
[23936.497840] smpboot: Booting Node 0 Processor 1 APIC 0x1
[23936.512769] CPU1 is up
[23936.512790] smpboot: Booting Node 0 Processor 2 APIC 0x2
[23936.527440] CPU2 is up
[23936.527458] smpboot: Booting Node 0 Processor 3 APIC 0x3
[23936.541990] CPU3 is up
[23936.545830] ACPI: Waking up from system sleep state S3
[23936.833254] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[23936.849266] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[23936.897272] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[23936.945291] PM: noirq resume of devices complete after 160.008 msecs
[23936.945406] PM: early resume of devices complete after 0.093 msecs
[23936.945427] i915 0000:00:02.0: setting latency timer to 64
[23936.945438] xhci_hcd 0000:00:14.0: setting latency timer to 64
[23936.945462] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[23936.945560] ahci 0000:00:1f.2: setting latency timer to 64
[23936.945632] snd_hda_intel 0000:00:03.0: irq 66 for MSI/MSI-X
[23936.945800] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[23936.945842] ehci-pci 0000:00:1d.0: setting latency timer to 64
[23936.967462] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[23936.967486] Probing NFC pn544
[23937.281028] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[23937.283150] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[23937.288757] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[23937.288948] ata1.00: configured for UDMA/133
[23937.301031] sd 0:0:0:0: [sda] Starting disk
[23937.365166] usb 2-5: reset full-speed USB device number 3 using xhci_hcd
[23937.381297] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f906c80
[23938.392434] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88002c40f2d0 (20130517/exresop-502)
[23938.392436] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20130517/dswexec-461)
[23938.392442] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BTP] (Node ffff8802538f81b8), AE_AML_OPERAND_TYPE (20130517/psparse-536)
[23938.396928] PM: resume of devices complete after 1452.328 msecs
[23938.397078] PM: Finishing wakeup.
[23938.397079] Restarting tasks ... done.
[23938.398099] video LNXVIDEO:00: Restoring backlight state
[23938.576316] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[23938.669094] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[23938.669256] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[23938.678195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23939.412868] psmouse serio1: elantech: unknown hardware version, aborting...
[23939.574162] input: PS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input18
[23946.288589] wlan0: authenticate with 9c:c7:a6:aa:75:39
[23946.289934] wlan0: send auth to 9c:c7:a6:aa:75:39 (try 1/3)
[23946.291604] wlan0: authenticated
[23946.291992] wlan0: associate with 9c:c7:a6:aa:75:39 (try 1/3)
[23946.316288] wlan0: RX AssocResp from 9c:c7:a6:aa:75:39 (capab=0x411 status=0 aid=1)
[23946.317393] wlan0: associated
[23946.317449] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[23946.317664] cfg80211: Calling CRDA for country: DE
[23946.324699] cfg80211: Regulatory domain changed to country: DE
[23946.324708] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23946.324715] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23946.324721] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23946.324727] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23946.324732] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[23946.324737] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[23946.341814] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 9c:c7:a6:aa:75:39
[24136.574586] mce: [Hardware Error]: Machine check events logged
[27775.404807] nautilus[1989]: segfault at 8 ip 00007f142cd7b305 sp 00007fffa34214c0 error 4 in libglib-2.0.so.0.3800.1[7f142cd18000+fe000]
[29331.502978] wlan0: deauthenticating from 9c:c7:a6:aa:75:39 by local choice (reason=3)
[29331.507976] cfg80211: Calling CRDA to update world regulatory domain
[29331.514078] cfg80211: World regulatory domain updated:
[29331.514085] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[29331.514090] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29331.514094] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29331.514097] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[29331.514101] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29331.514104] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29332.773575] init: anacron main process (2584) killed by TERM signal
[29332.836537] PM: Syncing filesystems ... done.
[29332.850762] PM: Preparing system for mem sleep
[29332.851029] Freezing user space processes ... (elapsed 0.001 seconds) done.
[29332.852317] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[29332.853587] PM: Entering mem sleep
[29332.853651] Suspending console(s) (use no_console_suspend to debug)
[29332.853948] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[29332.854517] sd 0:0:0:0: [sda] Stopping disk
[29332.865362] mei_me 0000:00:16.0: suspend
[29332.865391] Removing pn544
[29333.076174] PM: suspend of devices complete after 222.539 msecs
[29333.076284] PM: late suspend of devices complete after 0.109 msecs
[29333.092387] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[29333.124167] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[29333.152092] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[29333.152130] PM: noirq suspend of devices complete after 75.886 msecs
[29333.152387] ACPI: Preparing to enter system sleep state S3
[29333.153698] PM: Saving platform NVS memory
[29333.154414] Disabling non-boot CPUs ...
[29333.256035] smpboot: CPU 1 is now offline
[29333.359967] smpboot: CPU 2 is now offline
[29333.463912] smpboot: CPU 3 is now offline
[29333.466007] ACPI: Low-level resume complete
[29333.466074] PM: Restoring platform NVS memory
[29333.466708] Enabling non-boot CPUs ...
[29333.466749] smpboot: Booting Node 0 Processor 1 APIC 0x1
[29333.481678] CPU1 is up
[29333.481699] smpboot: Booting Node 0 Processor 2 APIC 0x2
[29333.496341] CPU2 is up
[29333.496358] smpboot: Booting Node 0 Processor 3 APIC 0x3
[29333.510778] CPU3 is up
[29333.514698] ACPI: Waking up from system sleep state S3
[29333.574292] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[29333.590302] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[29333.638311] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[29333.686327] PM: noirq resume of devices complete after 157.417 msecs
[29333.686442] PM: early resume of devices complete after 0.094 msecs
[29333.686463] i915 0000:00:02.0: setting latency timer to 64
[29333.686474] xhci_hcd 0000:00:14.0: setting latency timer to 64
[29333.686519] usb usb2: root hub lost power or was reset
[29333.686521] usb usb3: root hub lost power or was reset
[29333.686584] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[29333.686678] xhci_hcd 0000:00:14.0: irq 63 for MSI/MSI-X
[29333.686754] mei_me 0000:00:16.0: irq 66 for MSI/MSI-X
[29333.686813] ahci 0000:00:1f.2: setting latency timer to 64
[29333.686839] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[29333.686989] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[29333.687106] ehci-pci 0000:00:1d.0: setting latency timer to 64
[29333.690291] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[29333.690323] Probing NFC pn544
[29333.764720] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88002c40f3a8 (20130517/exresop-502)
[29333.764722] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20130517/dswexec-461)
[29333.764727] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BTP] (Node ffff8802538f81b8), AE_AML_OPERAND_TYPE (20130517/psparse-536)
[29333.910126] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[29334.022082] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[29334.023879] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[29334.029397] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[29334.029593] ata1.00: configured for UDMA/133
[29334.042102] sd 0:0:0:0: [sda] Starting disk
[29334.154064] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[29334.170335] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802508854c0
[29334.281906] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[29334.298530] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024fbe2300
[29334.298532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024fbe2340
[29334.298533] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024fbe2380
[29334.298534] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880252892a00
[29334.298535] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880252892a40
[29334.465823] usb 2-5: reset full-speed USB device number 3 using xhci_hcd
[29334.482046] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f906c80
[29334.483052] PM: resume of devices complete after 797.051 msecs
[29334.483218] PM: Finishing wakeup.
[29334.483219] Restarting tasks ... done.
[29334.483992] video LNXVIDEO:00: Restoring backlight state
[29334.721936] usb 3-4: new SuperSpeed USB device number 2 using xhci_hcd
[29334.821620] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[29334.832713] usb 3-4: New USB device found, idVendor=0bda, idProduct=56ff
[29334.832717] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[29334.832718] usb 3-4: Product: Rear Camera
[29334.832720] usb 3-4: Manufacturer: Generic
[29334.832721] usb 3-4: SerialNumber: 200901010001
[29334.849580] uvcvideo: Found UVC 1.00 device Rear Camera (0bda:56ff)
[29334.857998] input: Rear Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input19
[29334.861294] usb 2-1: USB disconnect, device number 7
[29334.881428] xHCI xhci_drop_endpoint called with unaddressed device
[29334.881438] xHCI xhci_drop_endpoint called with unaddressed device
[29334.881443] xHCI xhci_check_bandwidth called with unaddressed device
[29334.882149] xHCI xhci_free_dev called with unaddressed device
[29334.995945] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[29334.996103] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[29335.498049] i8042: Can't write CTR while closing AUX port
[29336.014755] i8042: Can't reactivate AUX port
[29336.016910] [sched_delayed] sched: RT throttling activated
[29336.034388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[29336.181419] usb 2-1: new high-speed USB device number 8 using xhci_hcd
[29336.218584] usb 2-1: New USB device found, idVendor=0480, idProduct=a004
[29336.218594] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[29336.218599] usb 2-1: Product: External USB HDD
[29336.218603] usb 2-1: Manufacturer: Toshiba
[29336.218607] usb 2-1: SerialNumber: 20110318146A
[29336.220548] usb-storage 2-1:1.0: USB Mass Storage device detected
[29336.220706] scsi2 : usb-storage 2-1:1.0
[29336.221021] usb 2-4: USB disconnect, device number 2
[29336.286701] xHCI xhci_drop_endpoint called with udev and virt_dev does not match
[29336.286712] xHCI xhci_check_bandwidth called with udev and virt_dev does not match
[29336.294107] xHCI xhci_free_dev called with udev and virt_dev does not match
[29336.420776] usb 2-8: USB disconnect, device number 6
[29336.453239] xHCI xhci_drop_endpoint called with udev and virt_dev does not match
[29336.453251] xHCI xhci_check_bandwidth called with udev and virt_dev does not match
[29336.455050] xHCI xhci_free_dev called with udev and virt_dev does not match
[29337.137922] i8042: Can't write CTR while closing AUX port
[29337.192309] usb 2-8: new high-speed USB device number 9 using xhci_hcd
[29337.654649] i8042: Can't reactivate AUX port
[29337.656157] usb 2-8: New USB device found, idVendor=5986, idProduct=0548
[29337.656168] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[29337.656175] usb 2-8: Product: Front Camera
[29337.656182] usb 2-8: Manufacturer: Generic
[29337.656189] usb 2-8: SerialNumber: 200901010001
[29337.684868] uvcvideo: Found UVC 1.00 device Front Camera (5986:0548)
[29337.689370] input: Front Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input20
[29338.396607] i8042: Can't write CTR while closing AUX port
[29338.913212] i8042: Can't reactivate AUX port
[29339.304786] scsi 2:0:0:0: Direct-Access     Toshiba  External USB HDD      PQ: 0 ANSI: 4
[29339.309714] sd 2:0:0:0: Attached scsi generic sg1 type 0
[29340.144518] i8042: Can't write CTR while closing AUX port
[29340.145113] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[29340.661237] i8042: Can't reactivate AUX port
[29340.661759] sd 2:0:0:0: [sdc] Write Protect is off
[29340.661771] sd 2:0:0:0: [sdc] Mode Sense: 38 00 00 00
[29340.670727] sd 2:0:0:0: [sdc] No Caching mode page found
[29340.670742] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[29340.688338] sd 2:0:0:0: [sdc] No Caching mode page found
[29340.688353] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[29340.712261]  sdc: sdc1
[29340.727887] sd 2:0:0:0: [sdc] No Caching mode page found
[29340.727901] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[29340.727912] sd 2:0:0:0: [sdc] Attached SCSI disk
[29341.375237] i8042: Can't write CTR while closing AUX port
[29341.892001] i8042: Can't reactivate AUX port
[29344.841717] wlan0: authenticate with 9c:c7:a6:aa:75:39
[29344.842956] wlan0: send auth to 9c:c7:a6:aa:75:39 (try 1/3)
[29344.844920] wlan0: authenticated
[29344.848041] wlan0: associate with 9c:c7:a6:aa:75:39 (try 1/3)
[29344.871564] wlan0: RX AssocResp from 9c:c7:a6:aa:75:39 (capab=0x411 status=0 aid=1)
[29344.872566] wlan0: associated
[29344.872627] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[29344.872806] cfg80211: Calling CRDA for country: DE
[29344.882241] cfg80211: Regulatory domain changed to country: DE
[29344.882252] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[29344.882260] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[29344.882266] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[29344.882271] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[29344.882277] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[29344.882283] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[29344.889002] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 9c:c7:a6:aa:75:39
[29383.801366] mce: [Hardware Error]: Machine check events logged
[30098.097335] type=1400 audit(1387104376.900:66): apparmor="STATUS" operation="profile_replace" parent=3937 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3941 comm="apparmor_parser"
[30098.097356] type=1400 audit(1387104376.900:67): apparmor="STATUS" operation="profile_replace" parent=3937 profile="unconfined" name="/usr/sbin/cupsd" pid=3941 comm="apparmor_parser"
[30098.098707] type=1400 audit(1387104376.900:68): apparmor="STATUS" operation="profile_replace" parent=3937 profile="unconfined" name="/usr/sbin/cupsd" pid=3941 comm="apparmor_parser"
[30319.774862] systemd-hostnamed[4036]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[30352.528419] unity-panel-ser[1765]: segfault at 58 ip 00000000004061eb sp 00007fff654557b0 error 4 in unity-panel-service[400000+f000]
[30468.915011] traps: unity-panel-ser[4102] trap stack segment ip:4061eb sp:7fffc0a72120 error:0
[30755.628570] traps: unity-panel-ser[4772] trap stack segment ip:4061eb sp:7fffebd91f40 error:0
[30918.476913] traps: unity-panel-ser[4935] trap stack segment ip:4061eb sp:7fffe81bc9f0 error:0
[31339.410833] traps: unity-panel-ser[5612] trap stack segment ip:4061eb sp:7fff547d78f0 error:0
[31356.975360] traps: unity-panel-ser[5769] trap stack segment ip:4061eb sp:7fff9af72970 error:0
[31634.607590] traps: unity-panel-ser[5802] trap stack segment ip:4061eb sp:7fffd8628310 error:0