[ 26.484602] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.485658] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.498143] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.498316] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.434535] init: plymouth-stop pre-start process (1216) terminated with status 1 [ 51.733409] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 51.752963] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 51.759116] wlan0: authenticated [ 51.759209] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 51.759213] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 51.760609] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 51.775609] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x431 status=0 aid=2) [ 51.775782] wlan0: associated [ 51.775792] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.775984] cfg80211: Calling CRDA for country: MO [ 51.777595] ath: regdomain 0x81be updated by CountryIE [ 51.777597] ath: EEPROM regdomain: 0x81be [ 51.777598] ath: EEPROM indicates we should expect a country code [ 51.777599] ath: doing EEPROM country->regdmn map search [ 51.777600] ath: country maps to regdmn code: 0x21 [ 51.777601] ath: Country alpha2 being used: MO [ 51.777602] ath: Regpair used: 0x21 [ 51.777620] cfg80211: Regulatory domain changed to country: MO [ 51.777621] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.777622] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.777623] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 51.777624] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 51.777625] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 51.783279] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 76.058531] wlan0: deauthenticating from 00:0b:86:c0:1e:80 by local choice (reason=3) [ 76.065550] cfg80211: Calling CRDA to update world regulatory domain [ 76.070493] cfg80211: World regulatory domain updated: [ 76.070495] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 76.070497] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.070498] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.070499] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 76.070500] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.070501] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 77.101926] wlan0: authenticate with 00:1a:1e:c0:03:90 [ 77.121670] wlan0: direct probe to 00:1a:1e:c0:03:90 (try 1/3) [ 77.325365] wlan0: direct probe to 00:1a:1e:c0:03:90 (try 2/3) [ 77.529500] wlan0: direct probe to 00:1a:1e:c0:03:90 (try 3/3) [ 77.733633] wlan0: authentication with 00:1a:1e:c0:03:90 timed out [ 78.030688] wlan0: authenticate with 00:0b:86:c4:53:00 [ 78.050533] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 78.061476] wlan0: authenticated [ 78.061635] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 78.061639] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 78.061854] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 78.085550] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 78.085767] wlan0: associated [ 78.085825] cfg80211: Calling CRDA for country: MO [ 78.087911] ath: regdomain 0x81be updated by CountryIE [ 78.087914] ath: EEPROM regdomain: 0x81be [ 78.087916] ath: EEPROM indicates we should expect a country code [ 78.087917] ath: doing EEPROM country->regdmn map search [ 78.087919] ath: country maps to regdmn code: 0x21 [ 78.087920] ath: Country alpha2 being used: MO [ 78.087921] ath: Regpair used: 0x21 [ 78.087941] cfg80211: Regulatory domain changed to country: MO [ 78.087943] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 78.087945] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 78.087947] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 78.087949] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 78.087951] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 78.178644] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 143.362589] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 143.371309] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 143.371449] cfg80211: Calling CRDA to update world regulatory domain [ 143.374804] wlan0: authenticated [ 143.375025] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 143.375032] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 143.376816] cfg80211: World regulatory domain updated: [ 143.376823] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 143.376829] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 143.376834] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 143.376838] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 143.376842] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 143.376846] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 143.377892] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 143.412753] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x531 status=0 aid=2) [ 143.413109] wlan0: associated [ 143.413243] cfg80211: Calling CRDA for country: MO [ 143.418254] ath: regdomain 0x81be updated by CountryIE [ 143.418259] ath: EEPROM regdomain: 0x81be [ 143.418261] ath: EEPROM indicates we should expect a country code [ 143.418264] ath: doing EEPROM country->regdmn map search [ 143.418266] ath: country maps to regdmn code: 0x21 [ 143.418268] ath: Country alpha2 being used: MO [ 143.418270] ath: Regpair used: 0x21 [ 143.418294] cfg80211: Regulatory domain changed to country: MO [ 143.418296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 143.418299] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 143.418302] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 143.418304] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 143.418307] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 143.488908] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 175.737594] wlan0: authenticate with 00:0b:86:c4:53:00 [ 175.746490] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 175.746617] cfg80211: Calling CRDA to update world regulatory domain [ 175.749915] cfg80211: World regulatory domain updated: [ 175.749923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 175.749929] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 175.749934] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 175.749938] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 175.749942] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 175.749946] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 175.749964] wlan0: authenticated [ 175.750214] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 175.750220] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 175.750710] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 175.755744] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 175.755927] wlan0: associated [ 175.756024] cfg80211: Calling CRDA for country: MO [ 175.757652] ath: regdomain 0x81be updated by CountryIE [ 175.757655] ath: EEPROM regdomain: 0x81be [ 175.757656] ath: EEPROM indicates we should expect a country code [ 175.757657] ath: doing EEPROM country->regdmn map search [ 175.757658] ath: country maps to regdmn code: 0x21 [ 175.757659] ath: Country alpha2 being used: MO [ 175.757659] ath: Regpair used: 0x21 [ 175.757678] cfg80211: Regulatory domain changed to country: MO [ 175.757679] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 175.757680] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 175.757682] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 175.757683] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 175.757684] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 175.825726] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 270.968709] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 270.977559] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 270.977725] cfg80211: Calling CRDA to update world regulatory domain [ 270.984407] cfg80211: World regulatory domain updated: [ 270.984414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 270.984420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 270.984425] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 270.984430] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 270.984434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 270.984438] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 270.986593] wlan0: authenticated [ 270.986775] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 270.986779] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 270.989668] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 270.997659] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x531 status=0 aid=2) [ 270.998018] wlan0: associated [ 270.998151] cfg80211: Calling CRDA for country: MO [ 271.001510] ath: regdomain 0x81be updated by CountryIE [ 271.001516] ath: EEPROM regdomain: 0x81be [ 271.001518] ath: EEPROM indicates we should expect a country code [ 271.001520] ath: doing EEPROM country->regdmn map search [ 271.001523] ath: country maps to regdmn code: 0x21 [ 271.001525] ath: Country alpha2 being used: MO [ 271.001526] ath: Regpair used: 0x21 [ 271.001550] cfg80211: Regulatory domain changed to country: MO [ 271.001551] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 271.001555] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 271.001557] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 271.001560] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 271.001562] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 271.161855] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 354.786755] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 354.795452] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 1/3) [ 354.795552] cfg80211: Calling CRDA to update world regulatory domain [ 354.799721] cfg80211: World regulatory domain updated: [ 354.799725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 354.799727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 354.799729] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 354.799730] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 354.799732] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 354.799734] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 355.016612] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 2/3) [ 355.232764] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 3/3) [ 355.452794] wlan0: authentication with 00:1a:1e:c1:20:30 timed out [ 355.676594] wlan0: authenticate with 00:0b:86:3a:42:90 [ 355.689553] wlan0: direct probe to 00:0b:86:3a:42:90 (try 1/3) [ 355.890971] wlan0: direct probe to 00:0b:86:3a:42:90 (try 2/3) [ 356.094940] wlan0: direct probe to 00:0b:86:3a:42:90 (try 3/3) [ 356.298990] wlan0: authentication with 00:0b:86:3a:42:90 timed out [ 356.472645] wlan0: authenticate with 00:0b:86:3c:c5:40 [ 356.491573] wlan0: send auth to 00:0b:86:3c:c5:40 (try 1/3) [ 356.499857] wlan0: authenticated [ 356.500098] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 356.500103] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 356.503035] wlan0: associate with 00:0b:86:3c:c5:40 (try 1/3) [ 356.539211] wlan0: RX AssocResp from 00:0b:86:3c:c5:40 (capab=0x431 status=0 aid=9) [ 356.539540] wlan0: associated [ 356.540346] cfg80211: Calling CRDA for country: MO [ 356.543998] ath: regdomain 0x81be updated by CountryIE [ 356.544004] ath: EEPROM regdomain: 0x81be [ 356.544006] ath: EEPROM indicates we should expect a country code [ 356.544008] ath: doing EEPROM country->regdmn map search [ 356.544011] ath: country maps to regdmn code: 0x21 [ 356.544013] ath: Country alpha2 being used: MO [ 356.544014] ath: Regpair used: 0x21 [ 356.544040] cfg80211: Regulatory domain changed to country: MO [ 356.544042] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 356.544045] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 356.544048] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 356.544050] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 356.544053] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 356.659191] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:0b:86:3c:c5:40 [ 402.993425] cfg80211: Calling CRDA to update world regulatory domain [ 403.000570] cfg80211: World regulatory domain updated: [ 403.000575] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 403.000579] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 403.000582] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 403.000585] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 403.000587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 403.000590] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 403.104038] wlan0: authenticate with 00:1a:1e:c1:2b:10 [ 403.111238] wlan0: send auth to 00:1a:1e:c1:2b:10 (try 1/3) [ 403.329193] wlan0: send auth to 00:1a:1e:c1:2b:10 (try 2/3) [ 403.479193] wlan0: send auth to 00:1a:1e:c1:2b:10 (try 3/3) [ 403.647101] wlan0: authentication with 00:1a:1e:c1:2b:10 timed out [ 404.600280] wlan0: authenticate with 00:0b:86:c4:53:00 [ 404.618914] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 404.624011] wlan0: authenticated [ 404.624261] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 404.624267] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 404.626567] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 404.637348] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 404.637713] wlan0: associated [ 404.638658] cfg80211: Calling CRDA for country: MO [ 404.642208] ath: regdomain 0x81be updated by CountryIE [ 404.642214] ath: EEPROM regdomain: 0x81be [ 404.642216] ath: EEPROM indicates we should expect a country code [ 404.642219] ath: doing EEPROM country->regdmn map search [ 404.642221] ath: country maps to regdmn code: 0x21 [ 404.642223] ath: Country alpha2 being used: MO [ 404.642225] ath: Regpair used: 0x21 [ 404.642249] cfg80211: Regulatory domain changed to country: MO [ 404.642251] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 404.642254] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 404.642257] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 404.642260] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 404.642262] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 404.731608] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 525.360333] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 525.369186] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 525.369331] cfg80211: Calling CRDA to update world regulatory domain [ 525.371822] cfg80211: World regulatory domain updated: [ 525.371827] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 525.371828] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 525.371830] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 525.371831] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 525.371832] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 525.371834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 525.382191] wlan0: authenticated [ 525.382474] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 525.382480] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 525.385460] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 525.399024] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x531 status=0 aid=2) [ 525.399369] wlan0: associated [ 525.399518] cfg80211: Calling CRDA for country: MO [ 525.403749] ath: regdomain 0x81be updated by CountryIE [ 525.403755] ath: EEPROM regdomain: 0x81be [ 525.403757] ath: EEPROM indicates we should expect a country code [ 525.403760] ath: doing EEPROM country->regdmn map search [ 525.403762] ath: country maps to regdmn code: 0x21 [ 525.403764] ath: Country alpha2 being used: MO [ 525.403766] ath: Regpair used: 0x21 [ 525.403791] cfg80211: Regulatory domain changed to country: MO [ 525.403793] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 525.403796] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 525.403799] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 525.403801] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 525.403803] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 525.593466] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 545.896982] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 545.918873] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 557.801551] wlan0: authenticate with 00:0b:86:c4:53:00 [ 557.810461] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 557.811889] cfg80211: Calling CRDA to update world regulatory domain [ 557.818679] cfg80211: World regulatory domain updated: [ 557.818687] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 557.818693] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 557.818698] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 557.818702] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 557.818707] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 557.818711] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 557.833450] wlan0: authenticated [ 557.833772] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 557.833779] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 557.834527] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 557.870122] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 557.870651] wlan0: associated [ 557.870773] cfg80211: Calling CRDA for country: MO [ 557.874315] ath: regdomain 0x81be updated by CountryIE [ 557.874320] ath: EEPROM regdomain: 0x81be [ 557.874322] ath: EEPROM indicates we should expect a country code [ 557.874325] ath: doing EEPROM country->regdmn map search [ 557.874327] ath: country maps to regdmn code: 0x21 [ 557.874329] ath: Country alpha2 being used: MO [ 557.874331] ath: Regpair used: 0x21 [ 557.874354] cfg80211: Regulatory domain changed to country: MO [ 557.874355] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 557.874358] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 557.874361] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 557.874364] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 557.874366] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 557.917076] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 573.393604] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 573.414459] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 640.814155] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 640.829110] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 657.054619] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 657.089774] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 667.323137] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 667.338081] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 834.254786] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 834.276144] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 904.771548] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 904.780395] wlan0: send auth to 00:1a:1e:c1:20:30 (try 1/3) [ 904.780530] cfg80211: Calling CRDA to update world regulatory domain [ 904.783239] cfg80211: World regulatory domain updated: [ 904.783242] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 904.783245] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 904.783247] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 904.783248] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 904.783250] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 904.783251] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 904.785536] wlan0: authenticated [ 904.785735] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 904.785743] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 904.788754] wlan0: associate with 00:1a:1e:c1:20:30 (try 1/3) [ 904.796554] wlan0: RX AssocResp from 00:1a:1e:c1:20:30 (capab=0x531 status=0 aid=4) [ 904.796696] wlan0: associated [ 904.796774] cfg80211: Calling CRDA for country: MO [ 904.798315] ath: regdomain 0x81be updated by CountryIE [ 904.798318] ath: EEPROM regdomain: 0x81be [ 904.798319] ath: EEPROM indicates we should expect a country code [ 904.798320] ath: doing EEPROM country->regdmn map search [ 904.798320] ath: country maps to regdmn code: 0x21 [ 904.798321] ath: Country alpha2 being used: MO [ 904.798322] ath: Regpair used: 0x21 [ 904.798341] cfg80211: Regulatory domain changed to country: MO [ 904.798342] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 904.798343] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 904.798344] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 904.798345] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 904.798346] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 904.956326] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:20:30 [ 937.178129] wlan0: authenticate with 00:0b:86:c4:53:00 [ 937.189845] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 937.190086] cfg80211: Calling CRDA to update world regulatory domain [ 937.192618] cfg80211: World regulatory domain updated: [ 937.192622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 937.192625] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 937.192626] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 937.192628] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 937.192629] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 937.192631] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 937.192754] wlan0: authenticated [ 937.193454] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 937.193458] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 937.194949] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 937.200374] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 937.200527] wlan0: associated [ 937.200585] cfg80211: Calling CRDA for country: MO [ 937.202279] ath: regdomain 0x81be updated by CountryIE [ 937.202281] ath: EEPROM regdomain: 0x81be [ 937.202282] ath: EEPROM indicates we should expect a country code [ 937.202283] ath: doing EEPROM country->regdmn map search [ 937.202284] ath: country maps to regdmn code: 0x21 [ 937.202285] ath: Country alpha2 being used: MO [ 937.202286] ath: Regpair used: 0x21 [ 937.202305] cfg80211: Regulatory domain changed to country: MO [ 937.202306] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 937.202307] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 937.202308] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 937.202309] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 937.202310] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 937.253121] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 979.860718] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 979.895357] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 987.462059] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 987.485389] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 1057.041104] wlan0: authenticate with 00:0b:86:3a:9b:40 [ 1057.049851] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 1/3) [ 1057.050005] cfg80211: Calling CRDA to update world regulatory domain [ 1057.054937] cfg80211: World regulatory domain updated: [ 1057.054942] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1057.054946] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1057.054949] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1057.054951] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1057.054954] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1057.054956] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1057.264853] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 2/3) [ 1057.468709] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 3/3) [ 1058.462749] wlan0: authentication with 00:0b:86:3a:9b:40 timed out [ 1058.594459] wlan0: authenticate with 00:0b:86:c4:53:00 [ 1058.601823] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 1058.704904] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 1058.708576] wlan0: authenticated [ 1058.709016] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1058.709027] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1058.712881] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 1058.719215] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 1058.719540] wlan0: associated [ 1058.719935] cfg80211: Calling CRDA for country: MO [ 1058.724253] ath: regdomain 0x81be updated by CountryIE [ 1058.724259] ath: EEPROM regdomain: 0x81be [ 1058.724261] ath: EEPROM indicates we should expect a country code [ 1058.724264] ath: doing EEPROM country->regdmn map search [ 1058.724266] ath: country maps to regdmn code: 0x21 [ 1058.724268] ath: Country alpha2 being used: MO [ 1058.724270] ath: Regpair used: 0x21 [ 1058.724294] cfg80211: Regulatory domain changed to country: MO [ 1058.724296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1058.724299] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1058.724302] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1058.724305] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1058.724307] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1058.771851] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 1177.103651] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 1177.112526] wlan0: send auth to 00:1a:1e:c1:20:30 (try 1/3) [ 1177.112710] cfg80211: Calling CRDA to update world regulatory domain [ 1177.117692] wlan0: authenticated [ 1177.117948] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1177.117955] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1177.118554] wlan0: associate with 00:1a:1e:c1:20:30 (try 1/3) [ 1177.119105] cfg80211: World regulatory domain updated: [ 1177.119107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1177.119108] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1177.119109] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1177.119110] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1177.119111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1177.119112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1177.137807] wlan0: RX AssocResp from 00:1a:1e:c1:20:30 (capab=0x531 status=0 aid=4) [ 1177.138151] wlan0: associated [ 1177.138303] cfg80211: Calling CRDA for country: MO [ 1177.142926] ath: regdomain 0x81be updated by CountryIE [ 1177.142932] ath: EEPROM regdomain: 0x81be [ 1177.142934] ath: EEPROM indicates we should expect a country code [ 1177.142936] ath: doing EEPROM country->regdmn map search [ 1177.142939] ath: country maps to regdmn code: 0x21 [ 1177.142941] ath: Country alpha2 being used: MO [ 1177.142942] ath: Regpair used: 0x21 [ 1177.142968] cfg80211: Regulatory domain changed to country: MO [ 1177.142970] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1177.142973] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1177.142976] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1177.142979] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1177.142981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1177.717269] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:20:30 [ 1237.993026] wlan0: authenticate with 00:0b:86:c4:53:00 [ 1238.001838] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 1238.002542] cfg80211: Calling CRDA to update world regulatory domain [ 1238.007382] cfg80211: World regulatory domain updated: [ 1238.007388] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1238.007392] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1238.007395] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1238.007398] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1238.007400] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1238.007403] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1238.015942] wlan0: authenticated [ 1238.016158] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1238.016165] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1238.018554] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 1238.031776] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=6) [ 1238.032099] wlan0: associated [ 1238.032205] cfg80211: Calling CRDA for country: MO [ 1238.035884] ath: regdomain 0x81be updated by CountryIE [ 1238.035889] ath: EEPROM regdomain: 0x81be [ 1238.035891] ath: EEPROM indicates we should expect a country code [ 1238.035893] ath: doing EEPROM country->regdmn map search [ 1238.035895] ath: country maps to regdmn code: 0x21 [ 1238.035898] ath: Country alpha2 being used: MO [ 1238.035899] ath: Regpair used: 0x21 [ 1238.035924] cfg80211: Regulatory domain changed to country: MO [ 1238.035926] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1238.035929] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1238.035932] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1238.035935] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1238.035937] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1238.087142] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 1528.984391] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 1529.017177] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 1634.208347] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 1634.228210] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 1657.420472] wlan0: authenticate with 00:0b:86:3a:42:90 [ 1657.429340] wlan0: direct probe to 00:0b:86:3a:42:90 (try 1/3) [ 1657.429507] cfg80211: Calling CRDA to update world regulatory domain [ 1657.436101] cfg80211: World regulatory domain updated: [ 1657.436108] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1657.436114] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1657.436119] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1657.436123] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1657.436127] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1657.436132] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1657.629880] wlan0: direct probe to 00:0b:86:3a:42:90 (try 2/3) [ 1658.500403] wlan0: direct probe to 00:0b:86:3a:42:90 (try 3/3) [ 1658.702560] wlan0: authentication with 00:0b:86:3a:42:90 timed out [ 1658.759181] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 1658.767608] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 1658.786872] wlan0: authenticated [ 1658.787201] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1658.787206] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1658.790630] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 1658.797427] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x431 status=0 aid=2) [ 1658.797759] wlan0: associated [ 1658.797909] cfg80211: Calling CRDA for country: MO [ 1658.801198] ath: regdomain 0x81be updated by CountryIE [ 1658.801204] ath: EEPROM regdomain: 0x81be [ 1658.801205] ath: EEPROM indicates we should expect a country code [ 1658.801208] ath: doing EEPROM country->regdmn map search [ 1658.801210] ath: country maps to regdmn code: 0x21 [ 1658.801212] ath: Country alpha2 being used: MO [ 1658.801214] ath: Regpair used: 0x21 [ 1658.801240] cfg80211: Regulatory domain changed to country: MO [ 1658.801241] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1658.801245] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1658.801247] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1658.801250] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1658.801252] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1658.965534] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 1691.340801] cfg80211: Calling CRDA to update world regulatory domain [ 1691.341252] wlan0: authenticate with 00:0b:86:c4:53:00 [ 1691.352535] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 1691.352799] cfg80211: World regulatory domain updated: [ 1691.352804] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1691.352808] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1691.352811] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1691.352813] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1691.352815] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1691.352818] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1691.355982] wlan0: authenticated [ 1691.356225] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1691.356232] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1691.359941] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 1691.366578] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 1691.366908] wlan0: associated [ 1691.367062] cfg80211: Calling CRDA for country: MO [ 1691.371347] ath: regdomain 0x81be updated by CountryIE [ 1691.371353] ath: EEPROM regdomain: 0x81be [ 1691.371355] ath: EEPROM indicates we should expect a country code [ 1691.371358] ath: doing EEPROM country->regdmn map search [ 1691.371360] ath: country maps to regdmn code: 0x21 [ 1691.371362] ath: Country alpha2 being used: MO [ 1691.371364] ath: Regpair used: 0x21 [ 1691.371387] cfg80211: Regulatory domain changed to country: MO [ 1691.371389] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1691.371392] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1691.371395] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1691.371398] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1691.371400] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1691.397120] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 1745.199914] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 1745.208765] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 1745.209111] cfg80211: Calling CRDA to update world regulatory domain [ 1745.212229] wlan0: authenticated [ 1745.212361] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1745.212364] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1745.213220] cfg80211: World regulatory domain updated: [ 1745.213222] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1745.213223] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1745.213224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1745.213225] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1745.213226] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1745.213227] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1745.215256] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 1745.246292] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x531 status=0 aid=2) [ 1745.246621] wlan0: associated [ 1745.246786] cfg80211: Calling CRDA for country: MO [ 1745.251047] ath: regdomain 0x81be updated by CountryIE [ 1745.251054] ath: EEPROM regdomain: 0x81be [ 1745.251056] ath: EEPROM indicates we should expect a country code [ 1745.251058] ath: doing EEPROM country->regdmn map search [ 1745.251060] ath: country maps to regdmn code: 0x21 [ 1745.251063] ath: Country alpha2 being used: MO [ 1745.251064] ath: Regpair used: 0x21 [ 1745.251089] cfg80211: Regulatory domain changed to country: MO [ 1745.251091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1745.251094] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1745.251097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1745.251099] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1745.251102] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1745.349215] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 1777.601413] wlan0: authenticate with 00:0b:86:c4:53:00 [ 1777.610263] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 1777.610428] cfg80211: Calling CRDA to update world regulatory domain [ 1777.612619] cfg80211: World regulatory domain updated: [ 1777.612623] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1777.612625] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1777.612627] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1777.612628] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1777.612630] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1777.612632] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1777.615196] wlan0: authenticated [ 1777.615551] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 1777.615555] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 1777.616554] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 1777.632313] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 1777.632772] wlan0: associated [ 1777.632960] cfg80211: Calling CRDA for country: MO [ 1777.637350] ath: regdomain 0x81be updated by CountryIE [ 1777.637356] ath: EEPROM regdomain: 0x81be [ 1777.637358] ath: EEPROM indicates we should expect a country code [ 1777.637360] ath: doing EEPROM country->regdmn map search [ 1777.637363] ath: country maps to regdmn code: 0x21 [ 1777.637365] ath: Country alpha2 being used: MO [ 1777.637366] ath: Regpair used: 0x21 [ 1777.637390] cfg80211: Regulatory domain changed to country: MO [ 1777.637392] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1777.637395] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1777.637398] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1777.637400] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 1777.637403] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1777.775809] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 1833.898685] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 1833.920050] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 2313.332746] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 2313.341548] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 2313.341682] cfg80211: Calling CRDA to update world regulatory domain [ 2313.349106] cfg80211: World regulatory domain updated: [ 2313.349111] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2313.349114] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2313.349116] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2313.349119] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2313.349121] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2313.349123] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2313.544229] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 2314.538812] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 3/3) [ 2314.741003] wlan0: authentication with 00:0b:86:c0:1e:80 timed out [ 2314.798240] wlan0: authenticate with 00:0b:86:3a:42:90 [ 2314.807153] wlan0: direct probe to 00:0b:86:3a:42:90 (try 1/3) [ 2315.009121] wlan0: direct probe to 00:0b:86:3a:42:90 (try 2/3) [ 2315.213307] wlan0: direct probe to 00:0b:86:3a:42:90 (try 3/3) [ 2315.417454] wlan0: authentication with 00:0b:86:3a:42:90 timed out [ 2316.371278] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2316.384717] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2316.490154] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 2316.578524] wlan0: authenticated [ 2316.578884] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2316.578893] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2316.582207] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2316.606986] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2316.607313] wlan0: associated [ 2316.608219] cfg80211: Calling CRDA for country: MO [ 2316.612746] ath: regdomain 0x81be updated by CountryIE [ 2316.612751] ath: EEPROM regdomain: 0x81be [ 2316.612754] ath: EEPROM indicates we should expect a country code [ 2316.612756] ath: doing EEPROM country->regdmn map search [ 2316.612758] ath: country maps to regdmn code: 0x21 [ 2316.612761] ath: Country alpha2 being used: MO [ 2316.612762] ath: Regpair used: 0x21 [ 2316.612785] cfg80211: Regulatory domain changed to country: MO [ 2316.612787] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2316.612790] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2316.612792] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2316.612795] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2316.612797] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2316.644484] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 2381.327727] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 2381.336567] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 2381.336734] cfg80211: Calling CRDA to update world regulatory domain [ 2381.341340] cfg80211: World regulatory domain updated: [ 2381.341343] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2381.341345] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2381.341346] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2381.341347] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2381.341348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2381.341349] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2381.366916] wlan0: authenticated [ 2381.367162] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2381.367165] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2381.368694] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 2381.532799] wlan0: associate with 00:0b:86:c0:1e:80 (try 2/3) [ 2381.549640] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x531 status=0 aid=6) [ 2381.549987] wlan0: associated [ 2381.550137] cfg80211: Calling CRDA for country: MO [ 2381.554661] ath: regdomain 0x81be updated by CountryIE [ 2381.554667] ath: EEPROM regdomain: 0x81be [ 2381.554669] ath: EEPROM indicates we should expect a country code [ 2381.554672] ath: doing EEPROM country->regdmn map search [ 2381.554674] ath: country maps to regdmn code: 0x21 [ 2381.554676] ath: Country alpha2 being used: MO [ 2381.554678] ath: Regpair used: 0x21 [ 2381.554703] cfg80211: Regulatory domain changed to country: MO [ 2381.554704] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2381.554708] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2381.554710] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2381.554713] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2381.554716] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2381.565307] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 2397.347647] wlan0: deauthenticating from 00:0b:86:c0:1e:80 by local choice (reason=3) [ 2397.355029] cfg80211: Calling CRDA to update world regulatory domain [ 2397.362658] cfg80211: World regulatory domain updated: [ 2397.362666] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2397.362671] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2397.362675] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2397.362679] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2397.362683] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2397.362687] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2398.245129] wlan0: authenticate with 00:0b:86:3a:42:90 [ 2398.258364] wlan0: direct probe to 00:0b:86:3a:42:90 (try 1/3) [ 2398.459861] wlan0: direct probe to 00:0b:86:3a:42:90 (try 2/3) [ 2398.663978] wlan0: direct probe to 00:0b:86:3a:42:90 (try 3/3) [ 2398.868122] wlan0: authentication with 00:0b:86:3a:42:90 timed out [ 2399.826200] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 2399.845527] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 1/3) [ 2400.048900] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 2/3) [ 2400.253060] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 3/3) [ 2400.457199] wlan0: authentication with 00:0b:86:3a:9b:90 timed out [ 2400.602181] wlan0: authenticate with 00:0b:86:3c:c5:40 [ 2400.610144] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 1/3) [ 2400.813410] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 2/3) [ 2401.017614] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 3/3) [ 2401.221748] wlan0: authentication with 00:0b:86:3c:c5:40 timed out [ 2402.175965] wlan0: authenticate with 00:0b:86:c4:e1:e0 [ 2402.194668] wlan0: direct probe to 00:0b:86:c4:e1:e0 (try 1/3) [ 2402.398482] wlan0: direct probe to 00:0b:86:c4:e1:e0 (try 2/3) [ 2402.602606] wlan0: direct probe to 00:0b:86:c4:e1:e0 (try 3/3) [ 2402.806784] wlan0: authentication with 00:0b:86:c4:e1:e0 timed out [ 2403.760310] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2403.782574] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2403.797435] wlan0: authenticated [ 2403.797836] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2403.797845] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2403.799386] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2403.808587] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2403.808912] wlan0: associated [ 2403.809089] cfg80211: Calling CRDA for country: MO [ 2403.813876] ath: regdomain 0x81be updated by CountryIE [ 2403.813882] ath: EEPROM regdomain: 0x81be [ 2403.813884] ath: EEPROM indicates we should expect a country code [ 2403.813886] ath: doing EEPROM country->regdmn map search [ 2403.813888] ath: country maps to regdmn code: 0x21 [ 2403.813891] ath: Country alpha2 being used: MO [ 2403.813892] ath: Regpair used: 0x21 [ 2403.813916] cfg80211: Regulatory domain changed to country: MO [ 2403.813918] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2403.813920] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2403.813923] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2403.813926] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2403.813928] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2403.842561] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 2428.760285] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 2428.774890] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 1/3) [ 2428.775393] cfg80211: Calling CRDA to update world regulatory domain [ 2428.782094] cfg80211: World regulatory domain updated: [ 2428.782100] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2428.782103] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2428.782106] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2428.782109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2428.782111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2428.782114] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2428.975769] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 2/3) [ 2429.180045] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 3/3) [ 2430.187060] wlan0: authentication with 00:0b:86:3a:9b:90 timed out [ 2430.406794] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2430.421301] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2430.525591] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 2430.539606] wlan0: authenticated [ 2430.540014] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2430.540023] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2430.541610] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2430.551852] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2430.552178] wlan0: associated [ 2430.553066] cfg80211: Calling CRDA for country: MO [ 2430.556808] ath: regdomain 0x81be updated by CountryIE [ 2430.556814] ath: EEPROM regdomain: 0x81be [ 2430.556816] ath: EEPROM indicates we should expect a country code [ 2430.556819] ath: doing EEPROM country->regdmn map search [ 2430.556821] ath: country maps to regdmn code: 0x21 [ 2430.556823] ath: Country alpha2 being used: MO [ 2430.556825] ath: Regpair used: 0x21 [ 2430.556851] cfg80211: Regulatory domain changed to country: MO [ 2430.556853] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2430.556855] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2430.556858] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2430.556861] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2430.556863] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2430.585982] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 2464.936862] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 2464.961214] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 2496.956636] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 2496.969576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 2564.803277] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 2564.812497] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 1/3) [ 2564.813000] cfg80211: Calling CRDA to update world regulatory domain [ 2564.818029] cfg80211: World regulatory domain updated: [ 2564.818037] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2564.818042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2564.818047] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2564.818051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2564.818055] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2564.818060] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2565.030181] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 2/3) [ 2565.234132] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 3/3) [ 2565.438301] wlan0: authentication with 00:1a:1e:c1:20:30 timed out [ 2565.503830] wlan0: authenticate with 00:1a:1e:c1:2d:b0 [ 2565.522704] wlan0: direct probe to 00:1a:1e:c1:2d:b0 (try 1/3) [ 2565.726489] wlan0: direct probe to 00:1a:1e:c1:2d:b0 (try 2/3) [ 2565.930626] wlan0: direct probe to 00:1a:1e:c1:2d:b0 (try 3/3) [ 2566.134744] wlan0: authentication with 00:1a:1e:c1:2d:b0 timed out [ 2567.089176] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2567.107714] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2567.211457] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 2567.214491] wlan0: authenticated [ 2567.214846] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2567.214855] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2567.215421] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2567.234604] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2567.234930] wlan0: associated [ 2567.235095] cfg80211: Calling CRDA for country: MO [ 2567.239397] ath: regdomain 0x81be updated by CountryIE [ 2567.239402] ath: EEPROM regdomain: 0x81be [ 2567.239404] ath: EEPROM indicates we should expect a country code [ 2567.239406] ath: doing EEPROM country->regdmn map search [ 2567.239408] ath: country maps to regdmn code: 0x21 [ 2567.239410] ath: Country alpha2 being used: MO [ 2567.239412] ath: Regpair used: 0x21 [ 2567.239437] cfg80211: Regulatory domain changed to country: MO [ 2567.239439] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2567.239442] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2567.239445] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2567.239447] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2567.239450] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2567.276430] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 2586.960190] wlan0: Limiting TX power to 9 (20 - 11) dBm as advertised by 00:0b:86:c4:53:00 [ 2718.643552] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 2718.652307] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 2718.652494] cfg80211: Calling CRDA to update world regulatory domain [ 2718.658496] cfg80211: World regulatory domain updated: [ 2718.658504] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2718.658509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2718.658514] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2718.658519] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2718.658523] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2718.658527] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2718.932875] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 2719.145567] wlan0: send auth to 00:0b:86:c0:1e:80 (try 3/3) [ 2719.148072] wlan0: authenticated [ 2719.301267] wlan0: authenticate with 00:0b:86:cf:fd:c0 [ 2719.315530] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 1/3) [ 2719.410457] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 2/3) [ 2719.459923] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 3/3) [ 2719.617462] wlan0: authentication with 00:0b:86:cf:fd:c0 timed out [ 2720.569552] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 2720.588260] wlan0: send auth to 00:0b:86:c0:1e:80 (try 1/3) [ 2720.606074] wlan0: authenticated [ 2720.606320] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2720.606326] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2720.608088] wlan0: associate with 00:0b:86:c0:1e:80 (try 1/3) [ 2720.680066] wlan0: RX AssocResp from 00:0b:86:c0:1e:80 (capab=0x431 status=0 aid=7) [ 2720.680388] wlan0: associated [ 2720.680548] cfg80211: Calling CRDA for country: MO [ 2720.684844] ath: regdomain 0x81be updated by CountryIE [ 2720.684851] ath: EEPROM regdomain: 0x81be [ 2720.684854] ath: EEPROM indicates we should expect a country code [ 2720.684858] ath: doing EEPROM country->regdmn map search [ 2720.684861] ath: country maps to regdmn code: 0x21 [ 2720.684864] ath: Country alpha2 being used: MO [ 2720.684867] ath: Regpair used: 0x21 [ 2720.684895] cfg80211: Regulatory domain changed to country: MO [ 2720.684897] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2720.684900] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2720.684903] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2720.684905] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2720.684908] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2720.755320] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:c0:1e:80 [ 2733.259518] cfg80211: Calling CRDA to update world regulatory domain [ 2733.266676] cfg80211: World regulatory domain updated: [ 2733.266682] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2733.266685] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2733.266689] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2733.266691] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2733.266694] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2733.266696] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2733.514065] wlan0: authenticate with 00:0b:86:c7:28:80 [ 2733.528672] wlan0: direct probe to 00:0b:86:c7:28:80 (try 1/3) [ 2733.732659] wlan0: direct probe to 00:0b:86:c7:28:80 (try 2/3) [ 2733.936851] wlan0: direct probe to 00:0b:86:c7:28:80 (try 3/3) [ 2734.140981] wlan0: authentication with 00:0b:86:c7:28:80 timed out [ 2734.374585] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2734.393421] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2734.408894] wlan0: authenticated [ 2734.409377] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2734.409386] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2734.413145] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2734.420044] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2734.420369] wlan0: associated [ 2734.421321] cfg80211: Calling CRDA for country: MO [ 2734.425016] ath: regdomain 0x81be updated by CountryIE [ 2734.425022] ath: EEPROM regdomain: 0x81be [ 2734.425024] ath: EEPROM indicates we should expect a country code [ 2734.425027] ath: doing EEPROM country->regdmn map search [ 2734.425029] ath: country maps to regdmn code: 0x21 [ 2734.425031] ath: Country alpha2 being used: MO [ 2734.425033] ath: Regpair used: 0x21 [ 2734.425090] cfg80211: Regulatory domain changed to country: MO [ 2734.425093] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2734.425097] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2734.425100] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2734.425104] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2734.425107] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2734.606276] wlan0: Limiting TX power to 9 (20 - 11) dBm as advertised by 00:0b:86:c4:53:00 [ 2831.473682] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 2831.482518] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 1/3) [ 2831.482660] cfg80211: Calling CRDA to update world regulatory domain [ 2831.489589] cfg80211: World regulatory domain updated: [ 2831.489595] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2831.489599] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2831.489602] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2831.489604] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2831.489607] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2831.489609] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2831.684959] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 2/3) [ 2832.551440] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 3/3) [ 2832.753680] wlan0: authentication with 00:1a:1e:c1:20:30 timed out [ 2832.811180] wlan0: authenticate with 00:0b:86:c4:53:00 [ 2832.820039] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 2832.921783] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 2832.929286] wlan0: authenticated [ 2832.929670] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2832.929733] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2832.933756] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 2832.939592] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 2832.940000] wlan0: associated [ 2832.940159] cfg80211: Calling CRDA for country: MO [ 2832.944218] ath: regdomain 0x81be updated by CountryIE [ 2832.944224] ath: EEPROM regdomain: 0x81be [ 2832.944226] ath: EEPROM indicates we should expect a country code [ 2832.944228] ath: doing EEPROM country->regdmn map search [ 2832.944230] ath: country maps to regdmn code: 0x21 [ 2832.944233] ath: Country alpha2 being used: MO [ 2832.944234] ath: Regpair used: 0x21 [ 2832.944259] cfg80211: Regulatory domain changed to country: MO [ 2832.944261] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2832.944264] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2832.944267] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2832.944269] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2832.944272] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2832.970304] wlan0: Limiting TX power to 9 (20 - 11) dBm as advertised by 00:0b:86:c4:53:00 [ 2955.417882] wlan0: Limiting TX power to 12 (20 - 8) dBm as advertised by 00:0b:86:c4:53:00 [ 2999.434322] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 2999.468597] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3143.402907] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3143.437069] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3152.499262] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3152.522609] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3198.970780] wlan0: authenticate with 00:1a:1e:c1:2b:10 [ 3198.985259] wlan0: send auth to 00:1a:1e:c1:2b:10 (try 1/3) [ 3198.985343] cfg80211: Calling CRDA to update world regulatory domain [ 3198.988261] cfg80211: World regulatory domain updated: [ 3198.988269] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3198.988275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3198.988280] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3198.988284] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3198.988289] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3198.988293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3199.032575] wlan0: authenticated [ 3199.032957] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3199.032970] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3199.033926] wlan0: associate with 00:1a:1e:c1:2b:10 (try 1/3) [ 3200.216588] wlan0: associate with 00:1a:1e:c1:2b:10 (try 2/3) [ 3200.230243] wlan0: RX AssocResp from 00:1a:1e:c1:2b:10 (capab=0x531 status=0 aid=2) [ 3200.230565] wlan0: associated [ 3200.230661] cfg80211: Calling CRDA for country: MO [ 3200.234160] ath: regdomain 0x81be updated by CountryIE [ 3200.234166] ath: EEPROM regdomain: 0x81be [ 3200.234168] ath: EEPROM indicates we should expect a country code [ 3200.234170] ath: doing EEPROM country->regdmn map search [ 3200.234172] ath: country maps to regdmn code: 0x21 [ 3200.234175] ath: Country alpha2 being used: MO [ 3200.234176] ath: Regpair used: 0x21 [ 3200.234202] cfg80211: Regulatory domain changed to country: MO [ 3200.234204] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3200.234207] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3200.234210] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3200.234212] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3200.234215] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3200.272270] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:2b:10 [ 3214.916668] wlan0: deauthenticating from 00:1a:1e:c1:2b:10 by local choice (reason=3) [ 3214.921094] cfg80211: Calling CRDA to update world regulatory domain [ 3214.932572] cfg80211: World regulatory domain updated: [ 3214.932580] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3214.932586] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3214.932591] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3214.932596] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3214.932600] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3214.932604] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3215.806215] wlan0: authenticate with 00:1a:1e:c1:2b:10 [ 3215.819516] wlan0: send auth to 00:1a:1e:c1:2b:10 (try 1/3) [ 3215.922372] wlan0: authenticated [ 3215.922675] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3215.922684] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3215.925045] wlan0: associate with 00:1a:1e:c1:2b:10 (try 1/3) [ 3215.932080] wlan0: RX AssocResp from 00:1a:1e:c1:2b:10 (capab=0x531 status=0 aid=2) [ 3215.932440] wlan0: associated [ 3215.932643] cfg80211: Calling CRDA for country: MO [ 3215.936342] ath: regdomain 0x81be updated by CountryIE [ 3215.936347] ath: EEPROM regdomain: 0x81be [ 3215.936349] ath: EEPROM indicates we should expect a country code [ 3215.936352] ath: doing EEPROM country->regdmn map search [ 3215.936354] ath: country maps to regdmn code: 0x21 [ 3215.936356] ath: Country alpha2 being used: MO [ 3215.936358] ath: Regpair used: 0x21 [ 3215.936383] cfg80211: Regulatory domain changed to country: MO [ 3215.936385] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3215.936388] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3215.936390] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3215.936393] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3215.936396] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3215.936640] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:2b:10 [ 3218.357489] wlan0: disassociating from 00:1a:1e:c1:2b:10 by local choice (reason=3) [ 3218.377934] wlan0: deauthenticating from 00:1a:1e:c1:2b:10 by local choice (reason=3) [ 3218.378311] cfg80211: Calling CRDA to update world regulatory domain [ 3218.385170] cfg80211: World regulatory domain updated: [ 3218.385176] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3218.385179] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3218.385183] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3218.385185] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3218.385188] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3218.385190] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3220.225215] wlan0: authenticate with 00:0b:86:cf:fd:c0 [ 3220.244088] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 1/3) [ 3220.254301] wlan0: authenticated [ 3220.254416] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3220.254419] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3220.255898] wlan0: associate with 00:0b:86:cf:fd:c0 (try 1/3) [ 3220.289518] wlan0: RX AssocResp from 00:0b:86:cf:fd:c0 (capab=0x431 status=0 aid=6) [ 3220.289736] wlan0: associated [ 3220.290441] cfg80211: Calling CRDA for country: MO [ 3220.292279] ath: regdomain 0x81be updated by CountryIE [ 3220.292281] ath: EEPROM regdomain: 0x81be [ 3220.292282] ath: EEPROM indicates we should expect a country code [ 3220.292283] ath: doing EEPROM country->regdmn map search [ 3220.292284] ath: country maps to regdmn code: 0x21 [ 3220.292285] ath: Country alpha2 being used: MO [ 3220.292286] ath: Regpair used: 0x21 [ 3220.292304] cfg80211: Regulatory domain changed to country: MO [ 3220.292305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3220.292306] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3220.292307] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3220.292309] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3220.292310] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3221.340644] wlan0: Limiting TX power to 18 (20 - 2) dBm as advertised by 00:0b:86:cf:fd:c0 [ 3268.577354] cfg80211: Calling CRDA to update world regulatory domain [ 3268.584543] cfg80211: World regulatory domain updated: [ 3268.584549] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3268.584552] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3268.584556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3268.584558] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3268.584560] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3268.584563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3268.775596] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 3268.794527] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 1/3) [ 3268.998230] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 2/3) [ 3269.202341] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 3/3) [ 3269.406351] wlan0: authentication with 00:0b:86:3a:9b:90 timed out [ 3270.359707] wlan0: authenticate with 00:0b:86:cf:fd:c0 [ 3270.378787] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 1/3) [ 3270.550551] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 2/3) [ 3270.665135] wlan0: send auth to 00:0b:86:cf:fd:c0 (try 3/3) [ 3270.795479] wlan0: authentication with 00:0b:86:cf:fd:c0 timed out [ 3271.032302] wlan0: authenticate with 00:0b:86:c4:53:00 [ 3271.053774] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 3271.058785] wlan0: authenticated [ 3271.059157] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3271.059166] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3271.062556] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 3271.075970] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 3271.076297] wlan0: associated [ 3271.076471] cfg80211: Calling CRDA for country: MO [ 3271.081584] ath: regdomain 0x81be updated by CountryIE [ 3271.081590] ath: EEPROM regdomain: 0x81be [ 3271.081592] ath: EEPROM indicates we should expect a country code [ 3271.081595] ath: doing EEPROM country->regdmn map search [ 3271.081597] ath: country maps to regdmn code: 0x21 [ 3271.081599] ath: Country alpha2 being used: MO [ 3271.081601] ath: Regpair used: 0x21 [ 3271.081625] cfg80211: Regulatory domain changed to country: MO [ 3271.081627] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3271.081630] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3271.081633] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3271.081636] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3271.081638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3271.115525] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 3441.202220] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3441.225557] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3468.320204] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3468.340035] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3508.313787] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3508.345554] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3753.084578] wlan0: authenticate with 00:0b:86:3a:42:90 [ 3753.093389] wlan0: send auth to 00:0b:86:3a:42:90 (try 1/3) [ 3753.093547] cfg80211: Calling CRDA to update world regulatory domain [ 3753.099067] cfg80211: World regulatory domain updated: [ 3753.099075] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3753.099080] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3753.099084] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3753.099088] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3753.099092] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3753.099096] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3753.099982] wlan0: send auth to 00:0b:86:3a:42:90 (try 2/3) [ 3753.101866] wlan0: authenticated [ 3753.102103] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3753.102111] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3753.102595] wlan0: associate with 00:0b:86:3a:42:90 (try 1/3) [ 3753.114488] wlan0: RX AssocResp from 00:0b:86:3a:42:90 (capab=0x431 status=0 aid=27) [ 3753.114902] wlan0: associated [ 3753.115659] cfg80211: Calling CRDA for country: MO [ 3753.118954] ath: regdomain 0x81be updated by CountryIE [ 3753.118959] ath: EEPROM regdomain: 0x81be [ 3753.118961] ath: EEPROM indicates we should expect a country code [ 3753.118964] ath: doing EEPROM country->regdmn map search [ 3753.118966] ath: country maps to regdmn code: 0x21 [ 3753.118968] ath: Country alpha2 being used: MO [ 3753.118970] ath: Regpair used: 0x21 [ 3753.118995] cfg80211: Regulatory domain changed to country: MO [ 3753.118997] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3753.119000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3753.119003] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3753.119005] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3753.119008] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3753.175717] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:3a:42:90 [ 3764.859685] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3764.873145] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3772.118024] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 3772.138903] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 3776.280534] wlan0: authenticate with 00:0b:86:3a:9b:40 [ 3776.289348] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 1/3) [ 3776.289579] cfg80211: Calling CRDA to update world regulatory domain [ 3776.295097] cfg80211: World regulatory domain updated: [ 3776.295105] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3776.295110] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3776.295115] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3776.295119] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3776.295123] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3776.295127] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3776.506121] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 2/3) [ 3776.722249] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 3/3) [ 3776.926311] wlan0: authentication with 00:0b:86:3a:9b:40 timed out [ 3777.044086] wlan0: authenticate with 00:0b:86:3c:c5:40 [ 3777.065722] wlan0: send auth to 00:0b:86:3c:c5:40 (try 1/3) [ 3777.086452] wlan0: authenticated [ 3777.086721] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3777.086727] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3777.090401] wlan0: associate with 00:0b:86:3c:c5:40 (try 1/3) [ 3777.294636] wlan0: RX AssocResp from 00:0b:86:3c:c5:40 (capab=0x431 status=0 aid=14) [ 3777.294974] wlan0: associated [ 3777.295859] cfg80211: Calling CRDA for country: MO [ 3777.299524] ath: regdomain 0x81be updated by CountryIE [ 3777.299529] ath: EEPROM regdomain: 0x81be [ 3777.299531] ath: EEPROM indicates we should expect a country code [ 3777.299534] ath: doing EEPROM country->regdmn map search [ 3777.299536] ath: country maps to regdmn code: 0x21 [ 3777.299538] ath: Country alpha2 being used: MO [ 3777.299540] ath: Regpair used: 0x21 [ 3777.299564] cfg80211: Regulatory domain changed to country: MO [ 3777.299566] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3777.299569] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3777.299572] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3777.299575] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3777.299577] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3778.063576] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:0b:86:3c:c5:40 [ 3790.856068] cfg80211: Calling CRDA to update world regulatory domain [ 3790.866231] cfg80211: World regulatory domain updated: [ 3790.866237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3790.866241] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3790.866244] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3790.866246] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3790.866249] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3790.866251] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3791.801347] wlan0: authenticate with 00:0b:86:c4:53:00 [ 3791.823147] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 3791.832511] wlan0: authenticated [ 3791.832894] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3791.832903] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3791.836084] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 3791.840785] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 3791.841129] wlan0: associated [ 3791.841842] cfg80211: Calling CRDA for country: MO [ 3791.845543] ath: regdomain 0x81be updated by CountryIE [ 3791.845548] ath: EEPROM regdomain: 0x81be [ 3791.845550] ath: EEPROM indicates we should expect a country code [ 3791.845553] ath: doing EEPROM country->regdmn map search [ 3791.845555] ath: country maps to regdmn code: 0x21 [ 3791.845557] ath: Country alpha2 being used: MO [ 3791.845559] ath: Regpair used: 0x21 [ 3791.845582] cfg80211: Regulatory domain changed to country: MO [ 3791.845585] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3791.845588] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3791.845590] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3791.845593] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3791.845596] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3791.848915] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 3792.253559] wlan0: deauthenticating from 00:0b:86:c4:53:00 by local choice (reason=3) [ 3792.266114] cfg80211: Calling CRDA to update world regulatory domain [ 3792.270799] cfg80211: World regulatory domain updated: [ 3792.270806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3792.270810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3792.270814] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3792.270817] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3792.270820] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3792.270823] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3793.154483] wlan0: authenticate with 00:0b:86:c4:53:00 [ 3793.167581] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 3793.174033] wlan0: authenticated [ 3793.174203] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3793.174206] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3793.176951] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 3793.190126] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 3793.190620] wlan0: associated [ 3793.191948] cfg80211: Calling CRDA for country: MO [ 3793.195535] ath: regdomain 0x81be updated by CountryIE [ 3793.195541] ath: EEPROM regdomain: 0x81be [ 3793.195543] ath: EEPROM indicates we should expect a country code [ 3793.195545] ath: doing EEPROM country->regdmn map search [ 3793.195547] ath: country maps to regdmn code: 0x21 [ 3793.195549] ath: Country alpha2 being used: MO [ 3793.195551] ath: Regpair used: 0x21 [ 3793.195575] cfg80211: Regulatory domain changed to country: MO [ 3793.195577] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3793.195580] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3793.195583] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3793.195586] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3793.195588] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3793.283261] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 3987.406191] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 3987.415014] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 3987.415228] cfg80211: Calling CRDA to update world regulatory domain [ 3987.419919] cfg80211: World regulatory domain updated: [ 3987.419921] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3987.419923] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3987.419924] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3987.419925] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3987.419926] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3987.419927] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3987.617949] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 3988.612586] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 3/3) [ 3988.814805] wlan0: authentication with 00:0b:86:c0:1e:80 timed out [ 3988.872489] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 3988.881359] wlan0: send auth to 00:1a:1e:c1:20:30 (try 1/3) [ 3988.886794] wlan0: authenticated [ 3988.887004] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3988.887010] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3988.890823] wlan0: associate with 00:1a:1e:c1:20:30 (try 1/3) [ 3988.905610] wlan0: RX AssocResp from 00:1a:1e:c1:20:30 (capab=0x431 status=0 aid=3) [ 3988.905937] wlan0: associated [ 3988.906855] cfg80211: Calling CRDA for country: MO [ 3988.910743] ath: regdomain 0x81be updated by CountryIE [ 3988.910749] ath: EEPROM regdomain: 0x81be [ 3988.910751] ath: EEPROM indicates we should expect a country code [ 3988.910753] ath: doing EEPROM country->regdmn map search [ 3988.910755] ath: country maps to regdmn code: 0x21 [ 3988.910758] ath: Country alpha2 being used: MO [ 3988.910759] ath: Regpair used: 0x21 [ 3988.910805] cfg80211: Regulatory domain changed to country: MO [ 3988.910807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3988.910810] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3988.910813] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3988.910815] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3988.910818] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3990.497629] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:20:30 [ 3995.979921] cfg80211: Calling CRDA to update world regulatory domain [ 3995.987241] cfg80211: World regulatory domain updated: [ 3995.987247] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3995.987250] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3995.987253] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3995.987256] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3995.987258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3995.987261] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3996.925976] wlan0: authenticate with 00:0b:86:3c:c5:40 [ 3996.947417] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 1/3) [ 3997.148285] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 2/3) [ 3997.352402] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 3/3) [ 3997.556519] wlan0: authentication with 00:0b:86:3c:c5:40 timed out [ 3998.511012] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 3998.523829] wlan0: send auth to 00:0b:86:3a:9b:90 (try 1/3) [ 3998.532199] wlan0: authenticated [ 3998.532366] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3998.532370] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3998.533131] wlan0: associate with 00:0b:86:3a:9b:90 (try 1/3) [ 3998.548167] wlan0: RX AssocResp from 00:0b:86:3a:9b:90 (capab=0x431 status=0 aid=26) [ 3998.548494] wlan0: associated [ 3998.548870] cfg80211: Calling CRDA for country: MO [ 3998.553199] ath: regdomain 0x81be updated by CountryIE [ 3998.553205] ath: EEPROM regdomain: 0x81be [ 3998.553207] ath: EEPROM indicates we should expect a country code [ 3998.553209] ath: doing EEPROM country->regdmn map search [ 3998.553211] ath: country maps to regdmn code: 0x21 [ 3998.553213] ath: Country alpha2 being used: MO [ 3998.553215] ath: Regpair used: 0x21 [ 3998.553238] cfg80211: Regulatory domain changed to country: MO [ 3998.553240] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3998.553243] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3998.553246] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3998.553249] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 3998.553251] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3998.588664] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:0b:86:3a:9b:90 [ 4037.073536] cfg80211: Calling CRDA to update world regulatory domain [ 4037.080867] cfg80211: World regulatory domain updated: [ 4037.080873] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4037.080877] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4037.080880] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4037.080883] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4037.080885] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4037.080887] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4037.984256] wlan0: authenticate with 00:0b:86:c4:53:00 [ 4038.003526] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 4038.022121] wlan0: authenticated [ 4038.022378] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4038.022386] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4038.023064] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 4038.035626] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 4038.035951] wlan0: associated [ 4038.036067] cfg80211: Calling CRDA for country: MO [ 4038.039793] ath: regdomain 0x81be updated by CountryIE [ 4038.039798] ath: EEPROM regdomain: 0x81be [ 4038.039800] ath: EEPROM indicates we should expect a country code [ 4038.039803] ath: doing EEPROM country->regdmn map search [ 4038.039805] ath: country maps to regdmn code: 0x21 [ 4038.039807] ath: Country alpha2 being used: MO [ 4038.039809] ath: Regpair used: 0x21 [ 4038.039833] cfg80211: Regulatory domain changed to country: MO [ 4038.039835] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4038.039839] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4038.039841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4038.039844] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4038.039846] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4038.085936] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 4072.747024] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 4072.767329] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 4076.502343] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 4076.515297] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 4093.864586] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 4093.873466] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 1/3) [ 4093.873620] cfg80211: Calling CRDA to update world regulatory domain [ 4093.879781] cfg80211: World regulatory domain updated: [ 4093.879789] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4093.879795] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4093.879800] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4093.879804] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4093.879808] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4093.879813] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4094.075854] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 2/3) [ 4094.279953] wlan0: direct probe to 00:1a:1e:c1:20:30 (try 3/3) [ 4095.198510] wlan0: authentication with 00:1a:1e:c1:20:30 timed out [ 4095.329568] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 4095.337408] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 4095.540797] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 4095.744900] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 3/3) [ 4095.949034] wlan0: authentication with 00:0b:86:c0:1e:80 timed out [ 4096.098741] wlan0: authenticate with 00:0b:86:3a:9b:40 [ 4096.107596] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 1/3) [ 4096.309331] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 2/3) [ 4096.513455] wlan0: direct probe to 00:0b:86:3a:9b:40 (try 3/3) [ 4096.717611] wlan0: authentication with 00:0b:86:3a:9b:40 timed out [ 4097.670857] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 4097.690420] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 1/3) [ 4097.894384] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 2/3) [ 4098.098519] wlan0: direct probe to 00:0b:86:3a:9b:90 (try 3/3) [ 4098.302651] wlan0: authentication with 00:0b:86:3a:9b:90 timed out [ 4099.257112] wlan0: authenticate with 00:0b:86:c4:53:00 [ 4099.278599] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 4099.383338] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 4099.393611] wlan0: authenticated [ 4099.393965] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4099.393977] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4099.395332] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 4099.402814] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 4099.403146] wlan0: associated [ 4099.404399] cfg80211: Calling CRDA for country: MO [ 4099.408413] ath: regdomain 0x81be updated by CountryIE [ 4099.408418] ath: EEPROM regdomain: 0x81be [ 4099.408420] ath: EEPROM indicates we should expect a country code [ 4099.408423] ath: doing EEPROM country->regdmn map search [ 4099.408425] ath: country maps to regdmn code: 0x21 [ 4099.408427] ath: Country alpha2 being used: MO [ 4099.408429] ath: Regpair used: 0x21 [ 4099.408454] cfg80211: Regulatory domain changed to country: MO [ 4099.408456] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4099.408459] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4099.408461] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4099.408464] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4099.408466] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4099.451253] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 4283.884964] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 4283.908797] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 4307.640879] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 4307.649798] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 4307.650199] cfg80211: Calling CRDA to update world regulatory domain [ 4307.656111] cfg80211: World regulatory domain updated: [ 4307.656117] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4307.656120] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4307.656123] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4307.656125] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4307.656128] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4307.656130] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4307.874054] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 4308.076275] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 3/3) [ 4308.966767] wlan0: authentication with 00:0b:86:c0:1e:80 timed out [ 4309.906377] wlan0: authenticate with 00:0b:86:c4:53:00 [ 4309.919935] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 4310.021536] wlan0: send auth to 00:0b:86:c4:53:00 (try 2/3) [ 4310.038311] wlan0: authenticated [ 4310.038698] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4310.038712] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4310.041524] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 4310.047536] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x531 status=0 aid=2) [ 4310.047863] wlan0: associated [ 4310.048698] cfg80211: Calling CRDA for country: MO [ 4310.052220] ath: regdomain 0x81be updated by CountryIE [ 4310.052225] ath: EEPROM regdomain: 0x81be [ 4310.052227] ath: EEPROM indicates we should expect a country code [ 4310.052230] ath: doing EEPROM country->regdmn map search [ 4310.052232] ath: country maps to regdmn code: 0x21 [ 4310.052234] ath: Country alpha2 being used: MO [ 4310.052236] ath: Regpair used: 0x21 [ 4310.052258] cfg80211: Regulatory domain changed to country: MO [ 4310.052260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4310.052263] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4310.052266] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4310.052269] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4310.052271] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4310.121249] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00 [ 4427.614940] wlan0: authenticate with 00:1a:1e:c1:20:30 [ 4427.623680] wlan0: send auth to 00:1a:1e:c1:20:30 (try 1/3) [ 4427.623840] cfg80211: Calling CRDA to update world regulatory domain [ 4427.627610] cfg80211: World regulatory domain updated: [ 4427.627612] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4427.627614] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4427.627615] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4427.627616] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4427.627617] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4427.627618] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4427.642700] wlan0: authenticated [ 4427.642997] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4427.643001] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4427.646673] wlan0: associate with 00:1a:1e:c1:20:30 (try 1/3) [ 4428.008825] wlan0: RX AssocResp from 00:1a:1e:c1:20:30 (capab=0x431 status=0 aid=3) [ 4428.009117] wlan0: associated [ 4428.009652] cfg80211: Calling CRDA for country: MO [ 4428.012265] ath: regdomain 0x81be updated by CountryIE [ 4428.012270] ath: EEPROM regdomain: 0x81be [ 4428.012272] ath: EEPROM indicates we should expect a country code [ 4428.012275] ath: doing EEPROM country->regdmn map search [ 4428.012277] ath: country maps to regdmn code: 0x21 [ 4428.012279] ath: Country alpha2 being used: MO [ 4428.012281] ath: Regpair used: 0x21 [ 4428.012306] cfg80211: Regulatory domain changed to country: MO [ 4428.012308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4428.012311] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4428.012314] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4428.012316] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4428.012319] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4428.127578] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:1a:1e:c1:20:30 [ 4438.017599] wlan0: disassociating from 00:1a:1e:c1:20:30 by local choice (reason=3) [ 4438.041923] cfg80211: Calling CRDA to update world regulatory domain [ 4438.042602] wlan0: deauthenticating from 00:1a:1e:c1:20:30 by local choice (reason=3) [ 4438.049215] cfg80211: World regulatory domain updated: [ 4438.049221] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4438.049224] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4438.049227] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4438.049230] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4438.049232] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4438.049235] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4439.171039] wlan0: authenticate with 00:0b:86:c0:1e:80 [ 4439.184884] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 1/3) [ 4439.386416] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 2/3) [ 4439.590553] wlan0: direct probe to 00:0b:86:c0:1e:80 (try 3/3) [ 4439.794697] wlan0: authentication with 00:0b:86:c0:1e:80 timed out [ 4439.968384] wlan0: authenticate with 00:0b:86:3a:9b:90 [ 4439.987236] wlan0: send auth to 00:0b:86:3a:9b:90 (try 1/3) [ 4440.090894] wlan0: send auth to 00:0b:86:3a:9b:90 (try 2/3) [ 4440.139458] wlan0: authenticated [ 4440.139817] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4440.139828] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4440.142935] wlan0: associate with 00:0b:86:3a:9b:90 (try 1/3) [ 4440.154293] wlan0: RX AssocResp from 00:0b:86:3a:9b:90 (capab=0x431 status=0 aid=26) [ 4440.154620] wlan0: associated [ 4440.155824] cfg80211: Calling CRDA for country: MO [ 4440.159475] ath: regdomain 0x81be updated by CountryIE [ 4440.159480] ath: EEPROM regdomain: 0x81be [ 4440.159482] ath: EEPROM indicates we should expect a country code [ 4440.159485] ath: doing EEPROM country->regdmn map search [ 4440.159487] ath: country maps to regdmn code: 0x21 [ 4440.159489] ath: Country alpha2 being used: MO [ 4440.159491] ath: Regpair used: 0x21 [ 4440.159518] cfg80211: Regulatory domain changed to country: MO [ 4440.159520] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4440.159523] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4440.159526] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4440.159528] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4440.159531] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4440.221316] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:0b:86:3a:9b:90 [ 4447.322728] cfg80211: Calling CRDA to update world regulatory domain [ 4447.330121] cfg80211: World regulatory domain updated: [ 4447.330127] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4447.330131] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4447.330134] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4447.330136] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4447.330139] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4447.330141] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4447.425207] wlan0: authenticate with 00:0b:86:3c:c5:40 [ 4447.434162] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 1/3) [ 4447.635837] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 2/3) [ 4447.839978] wlan0: direct probe to 00:0b:86:3c:c5:40 (try 3/3) [ 4448.044072] wlan0: authentication with 00:0b:86:3c:c5:40 timed out [ 4449.002509] wlan0: authenticate with 00:0b:86:c4:53:00 [ 4449.024107] wlan0: send auth to 00:0b:86:c4:53:00 (try 1/3) [ 4449.077791] wlan0: authenticated [ 4449.078169] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4449.078183] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4449.080805] wlan0: associate with 00:0b:86:c4:53:00 (try 1/3) [ 4449.142291] wlan0: RX AssocResp from 00:0b:86:c4:53:00 (capab=0x431 status=0 aid=2) [ 4449.142621] wlan0: associated [ 4449.143458] cfg80211: Calling CRDA for country: MO [ 4449.147236] ath: regdomain 0x81be updated by CountryIE [ 4449.147241] ath: EEPROM regdomain: 0x81be [ 4449.147243] ath: EEPROM indicates we should expect a country code [ 4449.147245] ath: doing EEPROM country->regdmn map search [ 4449.147248] ath: country maps to regdmn code: 0x21 [ 4449.147250] ath: Country alpha2 being used: MO [ 4449.147251] ath: Regpair used: 0x21 [ 4449.147275] cfg80211: Regulatory domain changed to country: MO [ 4449.147277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4449.147280] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4449.147283] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4449.147286] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 4449.147288] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4449.173595] wlan0: Limiting TX power to 15 (20 - 5) dBm as advertised by 00:0b:86:c4:53:00