Nov  6 09:22:11 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x57d7eeea)
Nov  6 09:22:11 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 09:22:11 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 3291 seconds.
Nov  6 09:22:11 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed bound -> renew
Nov  6 09:22:11 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 09:22:11 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 09:22:11 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 09:22:11 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 09:24:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:24:30 vektorDell kernel: [28938.499984] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 09:24:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 09:24:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:24:31 vektorDell kernel: [28938.521425] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 09:24:31 vektorDell kernel: [28938.521808] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 09:24:31 vektorDell kernel: [28938.521887] bridge-wlan0: disabling the bridge
Nov  6 09:24:31 vektorDell kernel: [28938.523226] wlan0: authenticated
Nov  6 09:24:31 vektorDell kernel: [28938.523439] wlan0: waiting for beacon from a0:f3:c1:13:20:9f
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 09:24:31 vektorDell kernel: [28938.527572] bridge-wlan0: down
Nov  6 09:24:31 vektorDell kernel: [28938.527588] bridge-wlan0: detached
Nov  6 09:24:31 vektorDell kernel: [28938.531526] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 09:24:31 vektorDell kernel: [28938.542179] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=1)
Nov  6 09:24:31 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 09:24:31 vektorDell kernel: [28938.557431] wlan0: associated
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 09:24:31 vektorDell kernel: [28938.584691] cfg80211: World regulatory domain updated:
Nov  6 09:24:31 vektorDell kernel: [28938.584697] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 09:24:31 vektorDell kernel: [28938.584701] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:24:31 vektorDell kernel: [28938.584703] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:24:31 vektorDell kernel: [28938.584706] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:24:31 vektorDell kernel: [28938.584708] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:24:31 vektorDell kernel: [28938.584710] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:24:31 vektorDell kernel: [28938.722103] userif-3: sent link down event.
Nov  6 09:24:31 vektorDell kernel: [28938.722114] userif-3: sent link up event.
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 09:24:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 09:24:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 09:24:31 vektorDell kernel: [28938.755108] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 09:24:31 vektorDell kernel: [28938.755137] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 09:24:31 vektorDell kernel: [28938.755203] /dev/vmnet: port on hub 0 successfully opened
Nov  6 09:24:31 vektorDell kernel: [28938.755226] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 09:24:31 vektorDell kernel: [28938.755232] bridge-wlan0: up
Nov  6 09:24:31 vektorDell kernel: [28938.755239] bridge-wlan0: attached
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 09:24:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 09:24:31 vektorDell kernel: [28938.955797] userif-3: sent link down event.
Nov  6 09:24:31 vektorDell kernel: [28938.955807] userif-3: sent link up event.
Nov  6 09:26:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:26:30 vektorDell kernel: [29058.550171] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 09:26:30 vektorDell kernel: [29058.564527] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 09:26:30 vektorDell kernel: [29058.564851] bridge-wlan0: disabling the bridge
Nov  6 09:26:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 09:26:30 vektorDell kernel: [29058.565088] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 09:26:30 vektorDell kernel: [29058.566299] wlan0: authenticated
Nov  6 09:26:30 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:26:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to (none) ((none))
Nov  6 09:26:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 09:26:30 vektorDell kernel: [29058.567249] wlan0: waiting for beacon from 74:ea:3a:c1:96:ea
Nov  6 09:26:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 09:26:30 vektorDell kernel: [29058.570240] bridge-wlan0: down
Nov  6 09:26:30 vektorDell kernel: [29058.570258] bridge-wlan0: detached
Nov  6 09:26:30 vektorDell kernel: [29058.571397] cfg80211: World regulatory domain updated:
Nov  6 09:26:30 vektorDell kernel: [29058.571406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 09:26:30 vektorDell kernel: [29058.571411] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:26:30 vektorDell kernel: [29058.571416] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:26:30 vektorDell kernel: [29058.571420] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:26:30 vektorDell kernel: [29058.571423] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:26:30 vektorDell kernel: [29058.571426] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:26:31 vektorDell kernel: [29058.598230] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 09:26:31 vektorDell kernel: [29058.610282] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 09:26:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 09:26:31 vektorDell kernel: [29058.622409] wlan0: associated
Nov  6 09:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 09:26:31 vektorDell kernel: [29058.764961] userif-3: sent link down event.
Nov  6 09:26:31 vektorDell kernel: [29058.764971] userif-3: sent link up event.
Nov  6 09:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 09:26:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 09:26:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 09:26:31 vektorDell kernel: [29058.821753] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 09:26:31 vektorDell kernel: [29058.821784] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 09:26:31 vektorDell kernel: [29058.821847] /dev/vmnet: port on hub 0 successfully opened
Nov  6 09:26:31 vektorDell kernel: [29058.821876] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 09:26:31 vektorDell kernel: [29058.821884] bridge-wlan0: up
Nov  6 09:26:31 vektorDell kernel: [29058.821892] bridge-wlan0: attached
Nov  6 09:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 09:26:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 09:26:31 vektorDell kernel: [29059.022112] userif-3: sent link down event.
Nov  6 09:26:31 vektorDell kernel: [29059.022123] userif-3: sent link up event.
Nov  6 09:52:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:52:31 vektorDell kernel: [30619.614744] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 09:52:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 09:52:31 vektorDell kernel: [30619.628717] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 09:52:31 vektorDell kernel: [30619.629028] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 09:52:31 vektorDell kernel: [30619.629168] bridge-wlan0: disabling the bridge
Nov  6 09:52:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:52:31 vektorDell kernel: [30619.633671] wlan0: authenticated
Nov  6 09:52:31 vektorDell kernel: [30619.637053] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 09:52:31 vektorDell kernel: [30619.637483] cfg80211: World regulatory domain updated:
Nov  6 09:52:31 vektorDell kernel: [30619.637489] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 09:52:31 vektorDell kernel: [30619.637491] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:52:31 vektorDell kernel: [30619.637493] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:52:31 vektorDell kernel: [30619.637495] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:52:31 vektorDell kernel: [30619.637496] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:52:31 vektorDell kernel: [30619.637497] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:52:31 vektorDell kernel: [30619.641084] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=1)
Nov  6 09:52:31 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 09:52:31 vektorDell kernel: [30619.657297] bridge-wlan0: down
Nov  6 09:52:31 vektorDell kernel: [30619.657304] bridge-wlan0: detached
Nov  6 09:52:31 vektorDell kernel: [30619.660451] wlan0: associated
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 09:52:31 vektorDell kernel: [30619.829094] userif-3: sent link down event.
Nov  6 09:52:31 vektorDell kernel: [30619.829099] userif-3: sent link up event.
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 09:52:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 09:52:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 09:52:31 vektorDell kernel: [30619.853294] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 09:52:31 vektorDell kernel: [30619.853307] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 09:52:31 vektorDell kernel: [30619.853319] /dev/vmnet: port on hub 0 successfully opened
Nov  6 09:52:31 vektorDell kernel: [30619.853326] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 09:52:31 vektorDell kernel: [30619.853329] bridge-wlan0: up
Nov  6 09:52:31 vektorDell kernel: [30619.853331] bridge-wlan0: attached
Nov  6 09:52:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 09:52:31 vektorDell kernel: [30620.053612] userif-3: sent link down event.
Nov  6 09:52:31 vektorDell kernel: [30620.053623] userif-3: sent link up event.
Nov  6 09:54:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:54:30 vektorDell kernel: [30739.489925] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 09:54:30 vektorDell kernel: [30739.502833] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 09:54:30 vektorDell kernel: [30739.503184] bridge-wlan0: disabling the bridge
Nov  6 09:54:30 vektorDell kernel: [30739.503352] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 09:54:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 09:54:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to (none) ((none))
Nov  6 09:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 09:54:30 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 09:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 09:54:30 vektorDell kernel: [30739.508540] wlan0: authenticated
Nov  6 09:54:30 vektorDell kernel: [30739.510164] cfg80211: World regulatory domain updated:
Nov  6 09:54:30 vektorDell kernel: [30739.510175] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 09:54:30 vektorDell kernel: [30739.510183] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:54:30 vektorDell kernel: [30739.510189] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:54:30 vektorDell kernel: [30739.510195] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:54:30 vektorDell kernel: [30739.510201] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:54:30 vektorDell kernel: [30739.510207] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 09:54:30 vektorDell kernel: [30739.511681] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 09:54:30 vektorDell kernel: [30739.516506] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 09:54:30 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 09:54:30 vektorDell kernel: [30739.523686] bridge-wlan0: down
Nov  6 09:54:30 vektorDell kernel: [30739.523704] bridge-wlan0: detached
Nov  6 09:54:30 vektorDell kernel: [30739.524347] wlan0: associated
Nov  6 09:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 09:54:31 vektorDell kernel: [30739.703243] userif-3: sent link down event.
Nov  6 09:54:31 vektorDell kernel: [30739.703250] userif-3: sent link up event.
Nov  6 09:54:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 09:54:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 09:54:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 09:54:31 vektorDell kernel: [30739.727745] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 09:54:31 vektorDell kernel: [30739.727775] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 09:54:31 vektorDell kernel: [30739.727840] /dev/vmnet: port on hub 0 successfully opened
Nov  6 09:54:31 vektorDell kernel: [30739.727869] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 09:54:31 vektorDell kernel: [30739.727878] bridge-wlan0: up
Nov  6 09:54:31 vektorDell kernel: [30739.727886] bridge-wlan0: attached
Nov  6 09:54:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 09:54:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 09:54:31 vektorDell kernel: [30739.928138] userif-3: sent link down event.
Nov  6 09:54:31 vektorDell kernel: [30739.928149] userif-3: sent link up event.
Nov  6 09:57:54 vektorDell kernel: [30943.188031] perf samples too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Nov  6 10:17:02 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x57d7eeea)
Nov  6 10:17:02 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 10:17:02 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2966 seconds.
Nov  6 10:17:02 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 10:17:02 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 10:17:02 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 10:17:02 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 10:17:02 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 10:28:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 10:28:30 vektorDell kernel: [32781.010663] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 10:28:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 10:28:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 10:28:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 10:28:30 vektorDell kernel: [32781.021222] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 10:28:30 vektorDell kernel: [32781.021528] bridge-wlan0: disabling the bridge
Nov  6 10:28:30 vektorDell kernel: [32781.023226] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 10:28:30 vektorDell kernel: [32781.029143] cfg80211: World regulatory domain updated:
Nov  6 10:28:30 vektorDell kernel: [32781.029147] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 10:28:30 vektorDell kernel: [32781.029149] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 10:28:30 vektorDell kernel: [32781.029151] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 10:28:30 vektorDell kernel: [32781.029153] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 10:28:30 vektorDell kernel: [32781.029154] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 10:28:30 vektorDell kernel: [32781.029156] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 10:28:31 vektorDell kernel: [32781.049437] bridge-wlan0: down
Nov  6 10:28:31 vektorDell kernel: [32781.049457] bridge-wlan0: detached
Nov  6 10:28:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 10:28:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 10:28:31 vektorDell kernel: [32781.162415] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 10:28:31 vektorDell kernel: [32781.164554] wlan0: authenticated
Nov  6 10:28:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 10:28:31 vektorDell kernel: [32781.221615] userif-3: sent link down event.
Nov  6 10:28:31 vektorDell kernel: [32781.221626] userif-3: sent link up event.
Nov  6 10:28:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 10:28:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 10:28:31 vektorDell kernel: [32781.925612] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 10:28:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 10:28:31 vektorDell kernel: [32781.948861] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 10:28:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 10:28:31 vektorDell kernel: [32781.961059] wlan0: authenticated
Nov  6 10:28:31 vektorDell kernel: [32781.961849] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 10:28:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 10:28:31 vektorDell kernel: [32781.976095] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 10:28:32 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 10:28:32 vektorDell kernel: [32782.042532] wlan0: associated
Nov  6 10:28:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 10:28:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 10:28:32 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 10:28:32 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 10:28:32 vektorDell kernel: [32782.065648] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 10:28:32 vektorDell kernel: [32782.065677] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 10:28:32 vektorDell kernel: [32782.065735] /dev/vmnet: port on hub 0 successfully opened
Nov  6 10:28:32 vektorDell kernel: [32782.065761] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 10:28:32 vektorDell kernel: [32782.065769] bridge-wlan0: up
Nov  6 10:28:32 vektorDell kernel: [32782.066105] bridge-wlan0: attached
Nov  6 10:28:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 10:28:32 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 10:28:32 vektorDell kernel: [32782.266013] userif-3: sent link down event.
Nov  6 10:28:32 vektorDell kernel: [32782.266065] userif-3: sent link up event.
Nov  6 11:04:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:04:30 vektorDell kernel: [34942.413282] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:04:30 vektorDell kernel: [34942.424755] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:04:30 vektorDell kernel: [34942.425092] bridge-wlan0: disabling the bridge
Nov  6 11:04:30 vektorDell kernel: [34942.425095] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:04:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:04:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:04:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:04:30 vektorDell kernel: [34942.432592] cfg80211: World regulatory domain updated:
Nov  6 11:04:30 vektorDell kernel: [34942.432602] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:04:30 vektorDell kernel: [34942.432607] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:04:30 vektorDell kernel: [34942.432612] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:04:30 vektorDell kernel: [34942.432616] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:04:30 vektorDell kernel: [34942.432619] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:04:30 vektorDell kernel: [34942.432622] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:04:30 vektorDell kernel: [34942.437702] bridge-wlan0: down
Nov  6 11:04:30 vektorDell kernel: [34942.437719] bridge-wlan0: detached
Nov  6 11:04:31 vektorDell kernel: [34942.564925] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:04:31 vektorDell kernel: [34942.570091] wlan0: authenticated
Nov  6 11:04:31 vektorDell kernel: [34942.625222] userif-3: sent link down event.
Nov  6 11:04:31 vektorDell kernel: [34942.625233] userif-3: sent link up event.
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:04:31 vektorDell kernel: [34943.166031] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:04:31 vektorDell kernel: [34943.176906] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:04:31 vektorDell kernel: [34943.179320] wlan0: authenticated
Nov  6 11:04:31 vektorDell kernel: [34943.181973] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:04:31 vektorDell kernel: [34943.187903] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:04:31 vektorDell kernel: [34943.197209] wlan0: associated
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:04:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:04:31 vektorDell kernel: [34943.397863] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:04:31 vektorDell kernel: [34943.397893] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:04:31 vektorDell kernel: [34943.397957] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:04:31 vektorDell kernel: [34943.397983] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:04:31 vektorDell kernel: [34943.397991] bridge-wlan0: up
Nov  6 11:04:31 vektorDell kernel: [34943.398000] bridge-wlan0: attached
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:04:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:04:32 vektorDell kernel: [34943.598241] userif-3: sent link down event.
Nov  6 11:04:32 vektorDell kernel: [34943.598257] userif-3: sent link up event.
Nov  6 11:06:28 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x57d7eeea)
Nov  6 11:06:28 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 11:06:28 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 3162 seconds.
Nov  6 11:06:28 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 11:06:28 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 11:06:28 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 11:06:28 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 11:06:28 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 11:10:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:10:30 vektorDell kernel: [35302.595328] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:10:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:10:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:10:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:10:30 vektorDell kernel: [35302.606645] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:10:30 vektorDell kernel: [35302.607651] bridge-wlan0: disabling the bridge
Nov  6 11:10:30 vektorDell kernel: [35302.608637] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:10:30 vektorDell kernel: [35302.615489] cfg80211: World regulatory domain updated:
Nov  6 11:10:30 vektorDell kernel: [35302.615498] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:10:30 vektorDell kernel: [35302.615503] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:10:30 vektorDell kernel: [35302.615508] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:10:30 vektorDell kernel: [35302.615512] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:10:30 vektorDell kernel: [35302.615515] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:10:30 vektorDell kernel: [35302.615518] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:10:30 vektorDell kernel: [35302.621575] bridge-wlan0: down
Nov  6 11:10:30 vektorDell kernel: [35302.621596] bridge-wlan0: detached
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:10:31 vektorDell kernel: [35302.746570] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:10:31 vektorDell kernel: [35302.749043] wlan0: authenticated
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:10:31 vektorDell kernel: [35302.808582] userif-3: sent link down event.
Nov  6 11:10:31 vektorDell kernel: [35302.808592] userif-3: sent link up event.
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:10:31 vektorDell kernel: [35303.397172] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:10:31 vektorDell kernel: [35303.410511] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:10:31 vektorDell kernel: [35303.412903] wlan0: authenticated
Nov  6 11:10:31 vektorDell kernel: [35303.414037] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:10:31 vektorDell kernel: [35303.418014] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:10:31 vektorDell kernel: [35303.427158] wlan0: associated
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:10:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:10:31 vektorDell kernel: [35303.628162] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:10:31 vektorDell kernel: [35303.628192] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:10:31 vektorDell kernel: [35303.628251] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:10:31 vektorDell kernel: [35303.628278] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:10:31 vektorDell kernel: [35303.628286] bridge-wlan0: up
Nov  6 11:10:31 vektorDell kernel: [35303.628406] bridge-wlan0: attached
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:10:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:10:32 vektorDell kernel: [35303.828454] userif-3: sent link down event.
Nov  6 11:10:32 vektorDell kernel: [35303.828465] userif-3: sent link up event.
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:22:31 vektorDell kernel: [36023.163491] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:22:31 vektorDell kernel: [36023.175505] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:22:31 vektorDell kernel: [36023.175866] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:22:31 vektorDell kernel: [36023.175934] bridge-wlan0: disabling the bridge
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:22:31 vektorDell kernel: [36023.182972] cfg80211: World regulatory domain updated:
Nov  6 11:22:31 vektorDell kernel: [36023.182995] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:22:31 vektorDell kernel: [36023.183001] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:22:31 vektorDell kernel: [36023.183006] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:22:31 vektorDell kernel: [36023.183009] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:22:31 vektorDell kernel: [36023.183013] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:22:31 vektorDell kernel: [36023.183016] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:22:31 vektorDell kernel: [36023.189665] bridge-wlan0: down
Nov  6 11:22:31 vektorDell kernel: [36023.189684] bridge-wlan0: detached
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:22:31 vektorDell kernel: [36023.315686] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:22:31 vektorDell kernel: [36023.317515] wlan0: authenticated
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:22:31 vektorDell kernel: [36023.375965] userif-3: sent link down event.
Nov  6 11:22:31 vektorDell kernel: [36023.375976] userif-3: sent link up event.
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:22:31 vektorDell kernel: [36024.041001] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:22:31 vektorDell kernel: [36024.057062] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:22:31 vektorDell kernel: [36024.080334] wlan0: authenticated
Nov  6 11:22:31 vektorDell kernel: [36024.082314] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:22:31 vektorDell kernel: [36024.100536] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:22:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:22:31 vektorDell kernel: [36024.130530] wlan0: associated
Nov  6 11:22:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:22:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:22:32 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:22:32 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:22:32 vektorDell kernel: [36024.167517] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:22:32 vektorDell kernel: [36024.167548] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:22:32 vektorDell kernel: [36024.167609] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:22:32 vektorDell kernel: [36024.167637] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:22:32 vektorDell kernel: [36024.167645] bridge-wlan0: up
Nov  6 11:22:32 vektorDell kernel: [36024.167655] bridge-wlan0: attached
Nov  6 11:22:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:22:32 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:22:32 vektorDell kernel: [36024.367273] userif-3: sent link down event.
Nov  6 11:22:32 vektorDell kernel: [36024.367284] userif-3: sent link up event.
Nov  6 11:26:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:26:30 vektorDell kernel: [36263.256379] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:26:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:26:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:26:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:26:30 vektorDell kernel: [36263.268257] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:26:30 vektorDell kernel: [36263.268624] bridge-wlan0: disabling the bridge
Nov  6 11:26:30 vektorDell kernel: [36263.268659] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:26:30 vektorDell kernel: [36263.275534] cfg80211: World regulatory domain updated:
Nov  6 11:26:30 vektorDell kernel: [36263.275543] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:26:30 vektorDell kernel: [36263.275549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:26:30 vektorDell kernel: [36263.275554] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:26:30 vektorDell kernel: [36263.275558] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:26:30 vektorDell kernel: [36263.275561] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:26:30 vektorDell kernel: [36263.275565] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:26:30 vektorDell kernel: [36263.299230] bridge-wlan0: down
Nov  6 11:26:30 vektorDell kernel: [36263.299250] bridge-wlan0: detached
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:26:31 vektorDell kernel: [36263.408460] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:26:31 vektorDell kernel: [36263.410968] wlan0: authenticated
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:26:31 vektorDell kernel: [36263.468726] userif-3: sent link down event.
Nov  6 11:26:31 vektorDell kernel: [36263.468736] userif-3: sent link up event.
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:26:31 vektorDell kernel: [36264.047321] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:26:31 vektorDell kernel: [36264.059664] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:26:31 vektorDell kernel: [36264.064203] wlan0: authenticated
Nov  6 11:26:31 vektorDell kernel: [36264.067504] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:26:31 vektorDell kernel: [36264.071488] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:26:31 vektorDell kernel: [36264.080491] wlan0: associated
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:26:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:26:31 vektorDell kernel: [36264.282099] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:26:31 vektorDell kernel: [36264.282129] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:26:31 vektorDell kernel: [36264.282192] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:26:31 vektorDell kernel: [36264.282220] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:26:31 vektorDell kernel: [36264.282228] bridge-wlan0: up
Nov  6 11:26:31 vektorDell kernel: [36264.282236] bridge-wlan0: attached
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:26:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:26:32 vektorDell kernel: [36264.482452] userif-3: sent link down event.
Nov  6 11:26:32 vektorDell kernel: [36264.482462] userif-3: sent link up event.
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:32:31 vektorDell kernel: [36623.631368] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:32:31 vektorDell kernel: [36623.641677] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:32:31 vektorDell kernel: [36623.641823] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:32:31 vektorDell kernel: [36623.641851] bridge-wlan0: disabling the bridge
Nov  6 11:32:31 vektorDell kernel: [36623.645399] cfg80211: World regulatory domain updated:
Nov  6 11:32:31 vektorDell kernel: [36623.645402] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:32:31 vektorDell kernel: [36623.645405] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:32:31 vektorDell kernel: [36623.645406] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:32:31 vektorDell kernel: [36623.645408] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:32:31 vektorDell kernel: [36623.645409] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:32:31 vektorDell kernel: [36623.645411] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:32:31 vektorDell kernel: [36623.671098] bridge-wlan0: down
Nov  6 11:32:31 vektorDell kernel: [36623.671107] bridge-wlan0: detached
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:32:31 vektorDell kernel: [36623.781509] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:32:31 vektorDell kernel: [36623.783915] wlan0: authenticated
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:32:31 vektorDell kernel: [36623.841937] userif-3: sent link down event.
Nov  6 11:32:31 vektorDell kernel: [36623.841942] userif-3: sent link up event.
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:32:31 vektorDell kernel: [36624.454992] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:32:31 vektorDell kernel: [36624.466049] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:32:31 vektorDell kernel: [36624.467831] wlan0: authenticated
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:32:31 vektorDell kernel: [36624.471609] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:32:31 vektorDell kernel: [36624.475522] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:32:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:32:31 vektorDell kernel: [36624.484296] wlan0: associated
Nov  6 11:32:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:32:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:32:32 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:32:32 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:32:32 vektorDell kernel: [36624.683546] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:32:32 vektorDell kernel: [36624.683560] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:32:32 vektorDell kernel: [36624.683586] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:32:32 vektorDell kernel: [36624.683598] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:32:32 vektorDell kernel: [36624.683603] bridge-wlan0: up
Nov  6 11:32:32 vektorDell kernel: [36624.683607] bridge-wlan0: attached
Nov  6 11:32:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:32:32 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:32:32 vektorDell kernel: [36624.883915] userif-3: sent link down event.
Nov  6 11:32:32 vektorDell kernel: [36624.883928] userif-3: sent link up event.
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:48:31 vektorDell kernel: [37584.286215] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 11:48:31 vektorDell kernel: [37584.297703] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 11:48:31 vektorDell kernel: [37584.298108] bridge-wlan0: disabling the bridge
Nov  6 11:48:31 vektorDell kernel: [37584.299749] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 11:48:31 vektorDell kernel: [37584.306225] cfg80211: World regulatory domain updated:
Nov  6 11:48:31 vektorDell kernel: [37584.306234] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 11:48:31 vektorDell kernel: [37584.306239] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:48:31 vektorDell kernel: [37584.306244] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:48:31 vektorDell kernel: [37584.306248] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:48:31 vektorDell kernel: [37584.306251] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:48:31 vektorDell kernel: [37584.306255] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 11:48:31 vektorDell kernel: [37584.328763] bridge-wlan0: down
Nov  6 11:48:31 vektorDell kernel: [37584.328791] bridge-wlan0: detached
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 11:48:31 vektorDell kernel: [37584.439467] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 11:48:31 vektorDell kernel: [37584.441416] wlan0: authenticated
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 11:48:31 vektorDell kernel: [37584.498122] userif-3: sent link down event.
Nov  6 11:48:31 vektorDell kernel: [37584.498132] userif-3: sent link up event.
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:48:31 vektorDell kernel: [37585.091118] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 11:48:31 vektorDell kernel: [37585.103609] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 11:48:31 vektorDell kernel: [37585.105454] wlan0: authenticated
Nov  6 11:48:31 vektorDell kernel: [37585.109108] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 11:48:31 vektorDell kernel: [37585.113199] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 11:48:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 11:48:31 vektorDell kernel: [37585.122584] wlan0: associated
Nov  6 11:48:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 11:48:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 11:48:32 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 11:48:32 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 11:48:32 vektorDell kernel: [37585.322413] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 11:48:32 vektorDell kernel: [37585.322441] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 11:48:32 vektorDell kernel: [37585.322497] /dev/vmnet: port on hub 0 successfully opened
Nov  6 11:48:32 vektorDell kernel: [37585.322524] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 11:48:32 vektorDell kernel: [37585.322532] bridge-wlan0: up
Nov  6 11:48:32 vektorDell kernel: [37585.322541] bridge-wlan0: attached
Nov  6 11:48:32 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 11:48:32 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 11:48:32 vektorDell kernel: [37585.522577] userif-3: sent link down event.
Nov  6 11:48:32 vektorDell kernel: [37585.522588] userif-3: sent link up event.
Nov  6 11:59:10 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x57d7eeea)
Nov  6 11:59:10 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 11:59:10 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 3059 seconds.
Nov  6 11:59:10 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 11:59:10 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 11:59:10 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 11:59:10 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 11:59:10 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 12:16:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:16:30 vektorDell kernel: [39265.205635] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 12:16:30 vektorDell kernel: [39265.217284] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 12:16:30 vektorDell kernel: [39265.217637] bridge-wlan0: disabling the bridge
Nov  6 12:16:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 12:16:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 12:16:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 12:16:30 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:16:30 vektorDell kernel: [39265.219066] wlan0: authenticated
Nov  6 12:16:30 vektorDell kernel: [39265.219744] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 12:16:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 12:16:30 vektorDell kernel: [39265.222043] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 12:16:30 vektorDell kernel: [39265.226137] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=1)
Nov  6 12:16:30 vektorDell kernel: [39265.226435] cfg80211: World regulatory domain updated:
Nov  6 12:16:30 vektorDell kernel: [39265.226442] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 12:16:30 vektorDell kernel: [39265.226448] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:16:30 vektorDell kernel: [39265.226452] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:16:30 vektorDell kernel: [39265.226455] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:16:30 vektorDell kernel: [39265.226459] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:16:30 vektorDell kernel: [39265.226462] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:16:30 vektorDell kernel: [39265.230109] bridge-wlan0: down
Nov  6 12:16:30 vektorDell kernel: [39265.230126] bridge-wlan0: detached
Nov  6 12:16:30 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 12:16:30 vektorDell kernel: [39265.237075] wlan0: associated
Nov  6 12:16:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 12:16:31 vektorDell kernel: [39265.417683] userif-3: sent link down event.
Nov  6 12:16:31 vektorDell kernel: [39265.417694] userif-3: sent link up event.
Nov  6 12:16:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 12:16:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 12:16:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 12:16:31 vektorDell kernel: [39265.443236] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 12:16:31 vektorDell kernel: [39265.443260] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 12:16:31 vektorDell kernel: [39265.443296] /dev/vmnet: port on hub 0 successfully opened
Nov  6 12:16:31 vektorDell kernel: [39265.443316] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 12:16:31 vektorDell kernel: [39265.443321] bridge-wlan0: up
Nov  6 12:16:31 vektorDell kernel: [39265.443328] bridge-wlan0: attached
Nov  6 12:16:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 12:16:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 12:16:31 vektorDell kernel: [39265.643342] userif-3: sent link down event.
Nov  6 12:16:31 vektorDell kernel: [39265.643355] userif-3: sent link up event.
Nov  6 12:18:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:18:30 vektorDell kernel: [39385.327994] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 12:18:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 12:18:30 vektorDell kernel: [39385.339332] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 12:18:30 vektorDell kernel: [39385.339692] bridge-wlan0: disabling the bridge
Nov  6 12:18:30 vektorDell kernel: [39385.339703] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 12:18:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to (none) ((none))
Nov  6 12:18:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 12:18:30 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:18:30 vektorDell kernel: [39385.341729] wlan0: authenticated
Nov  6 12:18:30 vektorDell kernel: [39385.342027] wlan0: waiting for beacon from 74:ea:3a:c1:96:ea
Nov  6 12:18:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 12:18:30 vektorDell kernel: [39385.345402] cfg80211: World regulatory domain updated:
Nov  6 12:18:30 vektorDell kernel: [39385.345404] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 12:18:30 vektorDell kernel: [39385.345406] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:18:30 vektorDell kernel: [39385.345407] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:18:30 vektorDell kernel: [39385.345408] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:18:30 vektorDell kernel: [39385.345409] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:18:30 vektorDell kernel: [39385.345410] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:18:30 vektorDell kernel: [39385.352759] bridge-wlan0: down
Nov  6 12:18:30 vektorDell kernel: [39385.352776] bridge-wlan0: detached
Nov  6 12:18:31 vektorDell kernel: [39385.404700] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 12:18:31 vektorDell kernel: [39385.408787] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 12:18:31 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 12:18:31 vektorDell kernel: [39385.418180] wlan0: associated
Nov  6 12:18:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 12:18:31 vektorDell kernel: [39385.539848] userif-3: sent link down event.
Nov  6 12:18:31 vektorDell kernel: [39385.539859] userif-3: sent link up event.
Nov  6 12:18:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 12:18:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 12:18:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 12:18:31 vektorDell kernel: [39385.620126] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 12:18:31 vektorDell kernel: [39385.620138] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 12:18:31 vektorDell kernel: [39385.620155] /dev/vmnet: port on hub 0 successfully opened
Nov  6 12:18:31 vektorDell kernel: [39385.620164] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 12:18:31 vektorDell kernel: [39385.620167] bridge-wlan0: up
Nov  6 12:18:31 vektorDell kernel: [39385.620171] bridge-wlan0: attached
Nov  6 12:18:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 12:18:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 12:18:31 vektorDell kernel: [39385.820399] userif-3: sent link down event.
Nov  6 12:18:31 vektorDell kernel: [39385.820410] userif-3: sent link up event.
Nov  6 12:50:09 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x57d7eeea)
Nov  6 12:50:09 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 12:50:09 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2859 seconds.
Nov  6 12:50:09 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 12:50:09 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 12:50:09 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 12:50:09 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 12:50:09 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 12:50:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:50:31 vektorDell kernel: [41306.613512] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 12:50:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 12:50:31 vektorDell kernel: [41306.625833] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 12:50:31 vektorDell kernel: [41306.626197] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 12:50:31 vektorDell kernel: [41306.626271] bridge-wlan0: disabling the bridge
Nov  6 12:50:31 vektorDell kernel: [41306.627647] wlan0: authenticated
Nov  6 12:50:31 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 12:50:31 vektorDell kernel: [41306.631552] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 12:50:31 vektorDell kernel: [41306.633271] cfg80211: World regulatory domain updated:
Nov  6 12:50:31 vektorDell kernel: [41306.633279] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 12:50:31 vektorDell kernel: [41306.633284] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:50:31 vektorDell kernel: [41306.633289] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:50:31 vektorDell kernel: [41306.633292] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:50:31 vektorDell kernel: [41306.633295] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:50:31 vektorDell kernel: [41306.633299] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:50:31 vektorDell kernel: [41306.635584] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=1)
Nov  6 12:50:31 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 12:50:31 vektorDell kernel: [41306.643944] wlan0: associated
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 12:50:31 vektorDell kernel: [41306.655672] bridge-wlan0: down
Nov  6 12:50:31 vektorDell kernel: [41306.655690] bridge-wlan0: detached
Nov  6 12:50:31 vektorDell kernel: [41306.826543] userif-3: sent link down event.
Nov  6 12:50:31 vektorDell kernel: [41306.826554] userif-3: sent link up event.
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 12:50:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 12:50:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 12:50:31 vektorDell kernel: [41306.849754] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 12:50:31 vektorDell kernel: [41306.849779] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 12:50:31 vektorDell kernel: [41306.849815] /dev/vmnet: port on hub 0 successfully opened
Nov  6 12:50:31 vektorDell kernel: [41306.849835] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 12:50:31 vektorDell kernel: [41306.849841] bridge-wlan0: up
Nov  6 12:50:31 vektorDell kernel: [41306.849961] bridge-wlan0: attached
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 12:50:31 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 12:50:31 vektorDell kernel: [41307.050108] userif-3: sent link down event.
Nov  6 12:50:31 vektorDell kernel: [41307.050119] userif-3: sent link up event.
Nov  6 12:54:30 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:54:30 vektorDell kernel: [41546.726146] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 12:54:30 vektorDell kernel: [41546.739815] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 12:54:30 vektorDell kernel: [41546.740177] bridge-wlan0: disabling the bridge
Nov  6 12:54:30 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 12:54:30 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 12:54:30 vektorDell kernel: [41546.742208] wlan0: authenticated
Nov  6 12:54:30 vektorDell kernel: [41546.742593] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 12:54:30 vektorDell kernel: [41546.744875] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 12:54:30 vektorDell kernel: [41546.748874] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=4)
Nov  6 12:54:30 vektorDell kernel: [41546.749683] cfg80211: World regulatory domain updated:
Nov  6 12:54:30 vektorDell kernel: [41546.749687] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 12:54:30 vektorDell kernel: [41546.749689] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:54:30 vektorDell kernel: [41546.749691] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:54:30 vektorDell kernel: [41546.749693] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:54:30 vektorDell kernel: [41546.749695] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:54:30 vektorDell kernel: [41546.749697] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:54:30 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 12:54:30 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 12:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 12:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 12:54:30 vektorDell kernel: [41546.757215] wlan0: associated
Nov  6 12:54:30 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 12:54:30 vektorDell kernel: [41546.764876] bridge-wlan0: down
Nov  6 12:54:30 vektorDell kernel: [41546.764885] bridge-wlan0: detached
Nov  6 12:54:31 vektorDell kernel: [41546.940215] userif-3: sent link down event.
Nov  6 12:54:31 vektorDell kernel: [41546.940219] userif-3: sent link up event.
Nov  6 12:54:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 12:54:31 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 12:54:31 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 12:54:31 vektorDell kernel: [41546.959413] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 12:54:31 vektorDell kernel: [41546.959426] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 12:54:31 vektorDell kernel: [41546.959447] /dev/vmnet: port on hub 0 successfully opened
Nov  6 12:54:31 vektorDell kernel: [41546.959457] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 12:54:31 vektorDell kernel: [41546.959460] bridge-wlan0: up
Nov  6 12:54:31 vektorDell kernel: [41546.959464] bridge-wlan0: attached
Nov  6 12:54:31 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 12:54:31 vektorDell kernel: [41547.159762] userif-3: sent link down event.
Nov  6 12:54:31 vektorDell kernel: [41547.159774] userif-3: sent link up event.
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> sleep requested (sleeping: no  enabled: yes)
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> sleeping or disabling...
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 15042
Nov  6 12:57:00 vektorDell kernel: [41696.150913] wlan0: deauthenticating from 74:ea:3a:c1:96:ea by local choice (reason=3)
Nov  6 12:57:00 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
Nov  6 12:57:00 vektorDell kernel: [41696.176086] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 12:57:00 vektorDell kernel: [41696.176203] bridge-wlan0: disabling the bridge
Nov  6 12:57:00 vektorDell NetworkManager[865]: <warn> DNS: plugin dnsmasq update failed
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> Removing DNS information from /sbin/resolvconf
Nov  6 12:57:00 vektorDell kernel: [41696.184208] cfg80211: World regulatory domain updated:
Nov  6 12:57:00 vektorDell kernel: [41696.184219] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 12:57:00 vektorDell kernel: [41696.184225] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:57:00 vektorDell kernel: [41696.184229] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:57:00 vektorDell kernel: [41696.184233] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:57:00 vektorDell kernel: [41696.184236] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:57:00 vektorDell kernel: [41696.184239] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 12:57:00 vektorDell kernel: [41696.198939] bridge-wlan0: down
Nov  6 12:57:00 vektorDell kernel: [41696.198947] bridge-wlan0: detached
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (wlan0): cleaning up...
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (wlan0): taking down device.
Nov  6 12:57:00 vektorDell kernel: [41696.376216] userif-3: sent link down event.
Nov  6 12:57:00 vektorDell kernel: [41696.376220] userif-3: sent link up event.
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (eth0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (eth0): cleaning up...
Nov  6 12:57:00 vektorDell NetworkManager[865]: <info> (eth0): taking down device.
Nov  6 12:57:26 vektorDell kernel: [41722.170683] PM: Syncing filesystems ... done.
Nov  6 12:57:26 vektorDell kernel: [41722.524756] PM: Preparing system for mem sleep
Nov  6 12:57:26 vektorDell kernel: [41722.525059] bbswitch: enabling discrete graphics
Nov  6 13:20:46 vektorDell kernel: [41722.884857] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  6 13:20:46 vektorDell kernel: [41722.884937] Freezing user space processes ... (elapsed 0.001 seconds) done.
Nov  6 13:20:46 vektorDell kernel: [41722.886465] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Nov  6 13:20:46 vektorDell kernel: [41722.887730] PM: Entering mem sleep
Nov  6 13:20:46 vektorDell kernel: [41722.887763] Suspending console(s) (use no_console_suspend to debug)
Nov  6 13:20:46 vektorDell kernel: [41722.887964] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov  6 13:20:46 vektorDell kernel: [41722.900644] mei_me 0000:00:16.0: suspend
Nov  6 13:20:46 vektorDell kernel: [41722.909979] sd 0:0:0:0: [sda] Stopping disk
Nov  6 13:20:46 vektorDell kernel: [41723.616952] PM: suspend of devices complete after 728.604 msecs
Nov  6 13:20:46 vektorDell kernel: [41723.617036] PM: late suspend of devices complete after 0.082 msecs
Nov  6 13:20:46 vektorDell kernel: [41723.617225] r8169 0000:04:00.0: System wakeup enabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41723.632911] xhci_hcd 0000:03:00.0: System wakeup enabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41723.664998] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41723.681054] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41723.712926] PM: noirq suspend of devices complete after 95.821 msecs
Nov  6 13:20:46 vektorDell kernel: [41723.713775] ACPI: Preparing to enter system sleep state S3
Nov  6 13:20:46 vektorDell kernel: [41723.715072] PM: Saving platform NVS memory
Nov  6 13:20:46 vektorDell kernel: [41723.715808] Disabling non-boot CPUs ...
Nov  6 13:20:46 vektorDell kernel: [41723.717334] smpboot: CPU 1 is now offline
Nov  6 13:20:46 vektorDell kernel: [41723.820881] smpboot: CPU 2 is now offline
Nov  6 13:20:46 vektorDell kernel: [41723.924948] smpboot: CPU 3 is now offline
Nov  6 13:20:46 vektorDell kernel: [41724.029015] smpboot: CPU 4 is now offline
Nov  6 13:20:46 vektorDell kernel: [41724.133086] smpboot: CPU 5 is now offline
Nov  6 13:20:46 vektorDell kernel: [41724.237152] smpboot: CPU 6 is now offline
Nov  6 13:20:46 vektorDell kernel: [41724.341210] smpboot: CPU 7 is now offline
Nov  6 13:20:46 vektorDell kernel: [41724.342799] ACPI: Low-level resume complete
Nov  6 13:20:46 vektorDell kernel: [41724.342842] PM: Restoring platform NVS memory
Nov  6 13:20:46 vektorDell kernel: [41724.343607] CPU0: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.343743] Enabling non-boot CPUs ...
Nov  6 13:20:46 vektorDell kernel: [41724.343780] smpboot: Booting Node 0 Processor 1 APIC 0x1
Nov  6 13:20:46 vektorDell kernel: [41724.354733] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.354752] CPU1: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.357204] CPU1 is up
Nov  6 13:20:46 vektorDell kernel: [41724.357223] smpboot: Booting Node 0 Processor 2 APIC 0x2
Nov  6 13:20:46 vektorDell kernel: [41724.368273] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.368291] CPU2: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.370683] CPU2 is up
Nov  6 13:20:46 vektorDell kernel: [41724.370701] smpboot: Booting Node 0 Processor 3 APIC 0x3
Nov  6 13:20:46 vektorDell kernel: [41724.381750] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.381766] CPU3: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.384179] CPU3 is up
Nov  6 13:20:46 vektorDell kernel: [41724.384196] smpboot: Booting Node 0 Processor 4 APIC 0x4
Nov  6 13:20:46 vektorDell kernel: [41724.395245] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.395263] CPU4: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.397673] CPU4 is up
Nov  6 13:20:46 vektorDell kernel: [41724.397690] smpboot: Booting Node 0 Processor 5 APIC 0x5
Nov  6 13:20:46 vektorDell kernel: [41724.403239] /dev/vmmon[19733]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445360376322267764 new 18445360374926719801 attempts 1
Nov  6 13:20:46 vektorDell kernel: [41724.408737] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.408754] CPU5: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.411192] CPU5 is up
Nov  6 13:20:46 vektorDell kernel: [41724.411210] smpboot: Booting Node 0 Processor 6 APIC 0x6
Nov  6 13:20:46 vektorDell kernel: [41724.422260] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.422277] CPU6: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.424724] CPU6 is up
Nov  6 13:20:46 vektorDell kernel: [41724.424741] smpboot: Booting Node 0 Processor 7 APIC 0x7
Nov  6 13:20:46 vektorDell kernel: [41724.435788] Disabled fast string operations
Nov  6 13:20:46 vektorDell kernel: [41724.435805] CPU7: Thermal monitoring handled by SMI
Nov  6 13:20:46 vektorDell kernel: [41724.438265] CPU7 is up
Nov  6 13:20:46 vektorDell kernel: [41724.446891] ACPI: Waking up from system sleep state S3
Nov  6 13:20:46 vektorDell kernel: [41724.511439] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41724.543466] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41724.559485] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  6 13:20:46 vektorDell kernel: [41724.591508] xhci_hcd 0000:03:00.0: System wakeup disabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41724.607599] PM: noirq resume of devices complete after 143.090 msecs
Nov  6 13:20:46 vektorDell kernel: [41724.607756] PM: early resume of devices complete after 0.113 msecs
Nov  6 13:20:46 vektorDell kernel: [41724.607783] i915 0000:00:02.0: setting latency timer to 64
Nov  6 13:20:46 vektorDell kernel: [41724.607811] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
Nov  6 13:20:46 vektorDell kernel: [41724.607833] ahci 0000:00:1f.2: setting latency timer to 64
Nov  6 13:20:46 vektorDell kernel: [41724.607966] ehci-pci 0000:00:1a.0: setting latency timer to 64
Nov  6 13:20:46 vektorDell kernel: [41724.607995] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Nov  6 13:20:46 vektorDell kernel: [41724.608010] ehci-pci 0000:00:1d.0: setting latency timer to 64
Nov  6 13:20:46 vektorDell kernel: [41724.608013] r8169 0000:04:00.0: System wakeup disabled by ACPI
Nov  6 13:20:46 vektorDell kernel: [41724.608227] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
Nov  6 13:20:46 vektorDell kernel: [41724.621292] [drm] Wrong MCH_SSKPD value: 0x16040307
Nov  6 13:20:46 vektorDell kernel: [41724.621292] [drm] This can cause pipe underruns and display issues.
Nov  6 13:20:46 vektorDell kernel: [41724.621293] [drm] Please upgrade your BIOS to fix this.
Nov  6 13:20:46 vektorDell kernel: [41724.819597] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Nov  6 13:20:46 vektorDell kernel: [41724.935661] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov  6 13:20:46 vektorDell kernel: [41724.943656] ata5: SATA link down (SStatus 0 SControl 300)
Nov  6 13:20:46 vektorDell kernel: [41724.969909] ata2.00: configured for UDMA/100
Nov  6 13:20:46 vektorDell kernel: [41725.172039] usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Nov  6 13:20:46 vektorDell kernel: [41725.524253] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
Nov  6 13:20:46 vektorDell kernel: [41726.452627] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Nov  6 13:20:46 vektorDell kernel: [41726.784916] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  6 13:20:46 vektorDell kernel: [41726.786724] ata1.00: configured for UDMA/100
Nov  6 13:20:46 vektorDell kernel: [41726.801103] sd 0:0:0:0: [sda] Starting disk
Nov  6 13:20:46 vektorDell kernel: [41726.826032] PM: resume of devices complete after 2216.816 msecs
Nov  6 13:20:46 vektorDell kernel: [41726.826274] PM: Finishing wakeup.
Nov  6 13:20:46 vektorDell kernel: [41726.826276] Restarting tasks ... done.
Nov  6 13:20:46 vektorDell kernel: [41726.849560] video LNXVIDEO:00: Restoring backlight state
Nov  6 13:20:46 vektorDell kernel: [41726.849566] video LNXVIDEO:01: Restoring backlight state
Nov  6 13:20:46 vektorDell kernel: [41726.849719] bbswitch: disabling discrete graphics
Nov  6 13:20:46 vektorDell kernel: [41726.849728] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Nov  6 13:20:46 vektorDell kernel: [41726.896937] usb 1-1.1: new high-speed USB device number 7 using ehci-pci
Nov  6 13:20:46 vektorDell kernel: [41726.969097] pci 0000:01:00.0: power state changed by ACPI to D3cold
Nov  6 13:20:46 vektorDell kernel: [41727.249046] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138
Nov  6 13:20:46 vektorDell kernel: [41727.249051] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov  6 13:20:46 vektorDell kernel: [41727.249053] usb 1-1.1: Product: USB2.0-CRW
Nov  6 13:20:46 vektorDell kernel: [41727.249055] usb 1-1.1: Manufacturer: Generic
Nov  6 13:20:46 vektorDell kernel: [41727.249057] usb 1-1.1: SerialNumber: 20090516388200000
Nov  6 13:20:46 vektorDell kernel: [41727.254748] ums-realtek 1-1.1:1.0: USB Mass Storage device detected
Nov  6 13:20:46 vektorDell kernel: [41727.273598] scsi9 : usb-storage 1-1.1:1.0
Nov  6 13:20:46 vektorDell kernel: [41727.274422] usb 1-1.1: USB disconnect, device number 7
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> wake requested (sleeping: yes  enabled: yes)
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> waking up and re-enabling...
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): bringing up device.
Nov  6 13:20:56 vektorDell kernel: [41736.748904] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
Nov  6 13:20:56 vektorDell kernel: [41736.755825] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): preparing device.
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'managed') [2]
Nov  6 13:20:56 vektorDell kernel: [41736.862593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (eth0): bringing up device.
Nov  6 13:20:56 vektorDell kernel: [41737.058496] r8169 0000:04:00.0 eth0: link down
Nov  6 13:20:56 vektorDell kernel: [41737.058613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (eth0): preparing device.
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (eth0): deactivating device (reason 'managed') [2]
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  6 13:20:56 vektorDell NetworkManager[865]: <warn> Trying to remove a non-existant call id.
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: starting -> ready
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: ready -> inactive
Nov  6 13:20:56 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Auto-activating connection 'vektoruj'.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) starting connection 'vektoruj'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): access point 'vektoruj' has security, but secrets are required.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): connection 'vektoruj' has security, and secrets exist.  No new secrets needed.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: added 'ssid' value 'vektoruj'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: added 'scan_ssid' value '1'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: added 'auth_alg' value 'OPEN'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: added 'psk' value '<omitted>'
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> Config: set interface ap_scan to 1
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: inactive -> scanning
Nov  6 13:20:57 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:20:57 vektorDell kernel: [41738.124366] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 13:20:57 vektorDell kernel: [41738.137218] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 13:20:57 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:20:57 vektorDell kernel: [41738.240391] wlan0: send auth to 74:ea:3a:c1:96:ea (try 2/3)
Nov  6 13:20:57 vektorDell kernel: [41738.242242] wlan0: authenticated
Nov  6 13:20:57 vektorDell kernel: [41738.244375] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 13:20:57 vektorDell kernel: [41738.248497] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 13:20:57 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 13:20:57 vektorDell kernel: [41738.257727] wlan0: associated
Nov  6 13:20:57 vektorDell kernel: [41738.257803] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov  6 13:20:57 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 13:20:58 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 13:20:58 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (auth) [id=0 id_str=]
Nov  6 13:20:58 vektorDell kernel: [41738.458326] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 13:20:58 vektorDell kernel: [41738.458358] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 13:20:58 vektorDell kernel: [41738.458408] /dev/vmnet: port on hub 0 successfully opened
Nov  6 13:20:58 vektorDell kernel: [41738.458435] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 13:20:58 vektorDell kernel: [41738.458443] bridge-wlan0: up
Nov  6 13:20:58 vektorDell kernel: [41738.458451] bridge-wlan0: attached
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'vektoruj'.
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> dhclient started with pid 20389
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning IP6 addrconf.
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Nov  6 13:20:58 vektorDell dhclient: Internet Systems Consortium DHCP Client 4.2.4
Nov  6 13:20:58 vektorDell dhclient: Copyright 2004-2012 Internet Systems Consortium.
Nov  6 13:20:58 vektorDell dhclient: All rights reserved.
Nov  6 13:20:58 vektorDell dhclient: For info, please visit https://www.isc.org/software/dhcp/
Nov  6 13:20:58 vektorDell dhclient: 
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Nov  6 13:20:58 vektorDell dhclient: Listening on LPF/wlan0/ac:72:89:5c:07:5b
Nov  6 13:20:58 vektorDell dhclient: Sending on   LPF/wlan0/ac:72:89:5c:07:5b
Nov  6 13:20:58 vektorDell dhclient: Sending on   Socket/fallback
Nov  6 13:20:58 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 255.255.255.255 port 67 (xid=0x553ccf3c)
Nov  6 13:20:58 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 13:20:58 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2713 seconds.
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Nov  6 13:20:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Nov  6 13:20:58 vektorDell kernel: [41738.658249] userif-3: sent link down event.
Nov  6 13:20:58 vektorDell kernel: [41738.658253] userif-3: sent link up event.
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> (wlan0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> (wlan0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> Policy set 'vektoruj' (wlan0) as default for IPv4 routing and DNS.
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> Writing DNS information to /sbin/resolvconf
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 13:20:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) successful, device activated.
Nov  6 13:20:59 vektorDell kernel: [41739.851166] userif-3: sent link down event.
Nov  6 13:20:59 vektorDell kernel: [41739.851170] userif-3: sent link up event.
Nov  6 13:21:19 vektorDell NetworkManager[865]: <info> (wlan0): IP6 addrconf timed out or failed.
Nov  6 13:21:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Nov  6 13:21:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Nov  6 13:21:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Nov  6 13:23:08 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:23:08 vektorDell kernel: [41867.929849] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 13:23:08 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 13:23:08 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 13:23:08 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 13:23:08 vektorDell kernel: [41867.941582] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 13:23:08 vektorDell kernel: [41867.941934] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 13:23:08 vektorDell kernel: [41867.942013] bridge-wlan0: disabling the bridge
Nov  6 13:23:08 vektorDell kernel: [41867.949028] cfg80211: World regulatory domain updated:
Nov  6 13:23:08 vektorDell kernel: [41867.949037] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 13:23:08 vektorDell kernel: [41867.949043] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:08 vektorDell kernel: [41867.949047] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:08 vektorDell kernel: [41867.949051] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:08 vektorDell kernel: [41867.949054] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:08 vektorDell kernel: [41867.949057] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:08 vektorDell kernel: [41867.965475] bridge-wlan0: down
Nov  6 13:23:08 vektorDell kernel: [41867.965491] bridge-wlan0: detached
Nov  6 13:23:08 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:23:08 vektorDell wpa_supplicant[935]: wlan0: SME: Authentication request to the driver failed
Nov  6 13:23:08 vektorDell kernel: [41868.081679] wlan0: send auth to a0:f3:c1:13:20:9f (try 2/3)
Nov  6 13:23:08 vektorDell kernel: [41868.083480] wlan0: authenticated
Nov  6 13:23:08 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Nov  6 13:23:08 vektorDell kernel: [41868.141984] userif-3: sent link down event.
Nov  6 13:23:08 vektorDell kernel: [41868.141994] userif-3: sent link up event.
Nov  6 13:23:08 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Nov  6 13:23:09 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:23:09 vektorDell kernel: [41868.706194] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 13:23:09 vektorDell kernel: [41868.716701] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 13:23:09 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 13:23:09 vektorDell kernel: [41868.719128] wlan0: authenticated
Nov  6 13:23:09 vektorDell kernel: [41868.721861] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 13:23:09 vektorDell kernel: [41868.725860] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 13:23:09 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 13:23:09 vektorDell kernel: [41868.734667] wlan0: associated
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 13:23:09 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 13:23:09 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 13:23:09 vektorDell kernel: [41868.935798] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 13:23:09 vektorDell kernel: [41868.935819] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 13:23:09 vektorDell kernel: [41868.935863] /dev/vmnet: port on hub 0 successfully opened
Nov  6 13:23:09 vektorDell kernel: [41868.935882] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 13:23:09 vektorDell kernel: [41868.935888] bridge-wlan0: up
Nov  6 13:23:09 vektorDell kernel: [41868.935895] bridge-wlan0: attached
Nov  6 13:23:09 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 13:23:09 vektorDell kernel: [41869.136187] userif-3: sent link down event.
Nov  6 13:23:09 vektorDell kernel: [41869.136198] userif-3: sent link up event.
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> sleep requested (sleeping: no  enabled: yes)
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> sleeping or disabling...
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 20389
Nov  6 13:23:47 vektorDell kernel: [41907.178731] wlan0: deauthenticating from 74:ea:3a:c1:96:ea by local choice (reason=3)
Nov  6 13:23:47 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
Nov  6 13:23:47 vektorDell kernel: [41907.191780] bridge-wlan0: disabling the bridge
Nov  6 13:23:47 vektorDell kernel: [41907.192007] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 13:23:47 vektorDell NetworkManager[865]: <warn> DNS: plugin dnsmasq update failed
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> Removing DNS information from /sbin/resolvconf
Nov  6 13:23:47 vektorDell kernel: [41907.199256] cfg80211: World regulatory domain updated:
Nov  6 13:23:47 vektorDell kernel: [41907.199268] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 13:23:47 vektorDell kernel: [41907.199276] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:47 vektorDell kernel: [41907.199282] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:47 vektorDell kernel: [41907.199287] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:47 vektorDell kernel: [41907.199293] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:47 vektorDell kernel: [41907.199298] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 13:23:47 vektorDell kernel: [41907.211054] bridge-wlan0: down
Nov  6 13:23:47 vektorDell kernel: [41907.211063] bridge-wlan0: detached
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (wlan0): cleaning up...
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (wlan0): taking down device.
Nov  6 13:23:47 vektorDell kernel: [41907.391780] userif-3: sent link down event.
Nov  6 13:23:47 vektorDell kernel: [41907.391785] userif-3: sent link up event.
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (eth0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (eth0): cleaning up...
Nov  6 13:23:47 vektorDell NetworkManager[865]: <info> (eth0): taking down device.
Nov  6 13:24:13 vektorDell kernel: [41933.097792] PM: Syncing filesystems ... done.
Nov  6 13:24:13 vektorDell kernel: [41933.356412] PM: Preparing system for mem sleep
Nov  6 13:24:13 vektorDell kernel: [41933.356747] bbswitch: enabling discrete graphics
Nov  6 15:09:50 vektorDell kernel: [41933.717060] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  6 15:09:50 vektorDell kernel: [41933.717136] Freezing user space processes ... (elapsed 0.001 seconds) done.
Nov  6 15:09:50 vektorDell kernel: [41933.718683] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Nov  6 15:09:50 vektorDell kernel: [41933.719989] PM: Entering mem sleep
Nov  6 15:09:50 vektorDell kernel: [41933.720031] Suspending console(s) (use no_console_suspend to debug)
Nov  6 15:09:50 vektorDell kernel: [41933.720235] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov  6 15:09:50 vektorDell kernel: [41933.733394] mei_me 0000:00:16.0: suspend
Nov  6 15:09:50 vektorDell kernel: [41933.753019] sd 0:0:0:0: [sda] Stopping disk
Nov  6 15:09:50 vektorDell kernel: [41934.425093] PM: suspend of devices complete after 704.492 msecs
Nov  6 15:09:50 vektorDell kernel: [41934.425207] PM: late suspend of devices complete after 0.112 msecs
Nov  6 15:09:50 vektorDell kernel: [41934.425398] r8169 0000:04:00.0: System wakeup enabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41934.441025] xhci_hcd 0000:03:00.0: System wakeup enabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41934.473111] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41934.489172] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41934.521046] PM: noirq suspend of devices complete after 95.772 msecs
Nov  6 15:09:50 vektorDell kernel: [41934.521868] ACPI: Preparing to enter system sleep state S3
Nov  6 15:09:50 vektorDell kernel: [41934.523145] PM: Saving platform NVS memory
Nov  6 15:09:50 vektorDell kernel: [41934.523886] Disabling non-boot CPUs ...
Nov  6 15:09:50 vektorDell kernel: [41934.525688] smpboot: CPU 1 is now offline
Nov  6 15:09:50 vektorDell kernel: [41934.629004] smpboot: CPU 2 is now offline
Nov  6 15:09:50 vektorDell kernel: [41934.733087] smpboot: CPU 3 is now offline
Nov  6 15:09:50 vektorDell kernel: [41934.837174] smpboot: CPU 4 is now offline
Nov  6 15:09:50 vektorDell kernel: [41934.941221] smpboot: CPU 5 is now offline
Nov  6 15:09:50 vektorDell kernel: [41935.045277] smpboot: CPU 6 is now offline
Nov  6 15:09:50 vektorDell kernel: [41935.045953] Broke affinity for irq 49
Nov  6 15:09:50 vektorDell kernel: [41935.149349] smpboot: CPU 7 is now offline
Nov  6 15:09:50 vektorDell kernel: [41935.150932] ACPI: Low-level resume complete
Nov  6 15:09:50 vektorDell kernel: [41935.150975] PM: Restoring platform NVS memory
Nov  6 15:09:50 vektorDell kernel: [41935.151742] CPU0: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.151868] Enabling non-boot CPUs ...
Nov  6 15:09:50 vektorDell kernel: [41935.151904] smpboot: Booting Node 0 Processor 1 APIC 0x1
Nov  6 15:09:50 vektorDell kernel: [41935.162857] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.162875] CPU1: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.165329] CPU1 is up
Nov  6 15:09:50 vektorDell kernel: [41935.165348] smpboot: Booting Node 0 Processor 2 APIC 0x2
Nov  6 15:09:50 vektorDell kernel: [41935.176398] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.176416] CPU2: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.178814] CPU2 is up
Nov  6 15:09:50 vektorDell kernel: [41935.178833] smpboot: Booting Node 0 Processor 3 APIC 0x3
Nov  6 15:09:50 vektorDell kernel: [41935.189880] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.189897] CPU3: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.192311] CPU3 is up
Nov  6 15:09:50 vektorDell kernel: [41935.192329] smpboot: Booting Node 0 Processor 4 APIC 0x4
Nov  6 15:09:50 vektorDell kernel: [41935.203378] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.203395] CPU4: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.205814] CPU4 is up
Nov  6 15:09:50 vektorDell kernel: [41935.205831] smpboot: Booting Node 0 Processor 5 APIC 0x5
Nov  6 15:09:50 vektorDell kernel: [41935.216878] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.216895] CPU5: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.219332] CPU5 is up
Nov  6 15:09:50 vektorDell kernel: [41935.219349] smpboot: Booting Node 0 Processor 6 APIC 0x6
Nov  6 15:09:50 vektorDell kernel: [41935.230399] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.230417] CPU6: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.232867] CPU6 is up
Nov  6 15:09:50 vektorDell kernel: [41935.232884] smpboot: Booting Node 0 Processor 7 APIC 0x7
Nov  6 15:09:50 vektorDell kernel: [41935.243931] Disabled fast string operations
Nov  6 15:09:50 vektorDell kernel: [41935.243948] CPU7: Thermal monitoring handled by SMI
Nov  6 15:09:50 vektorDell kernel: [41935.246415] CPU7 is up
Nov  6 15:09:50 vektorDell kernel: [41935.254999] ACPI: Waking up from system sleep state S3
Nov  6 15:09:50 vektorDell kernel: [41935.315571] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41935.347575] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41935.363614] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  6 15:09:50 vektorDell kernel: [41935.395642] xhci_hcd 0000:03:00.0: System wakeup disabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41935.411729] PM: noirq resume of devices complete after 140.653 msecs
Nov  6 15:09:50 vektorDell kernel: [41935.411883] PM: early resume of devices complete after 0.111 msecs
Nov  6 15:09:50 vektorDell kernel: [41935.411909] i915 0000:00:02.0: setting latency timer to 64
Nov  6 15:09:50 vektorDell kernel: [41935.411949] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
Nov  6 15:09:50 vektorDell kernel: [41935.411976] ahci 0000:00:1f.2: setting latency timer to 64
Nov  6 15:09:50 vektorDell kernel: [41935.412100] ehci-pci 0000:00:1a.0: setting latency timer to 64
Nov  6 15:09:50 vektorDell kernel: [41935.412130] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Nov  6 15:09:50 vektorDell kernel: [41935.412156] r8169 0000:04:00.0: System wakeup disabled by ACPI
Nov  6 15:09:50 vektorDell kernel: [41935.412181] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
Nov  6 15:09:50 vektorDell kernel: [41935.412196] ehci-pci 0000:00:1d.0: setting latency timer to 64
Nov  6 15:09:50 vektorDell kernel: [41935.425240] [drm] Wrong MCH_SSKPD value: 0x16040307
Nov  6 15:09:50 vektorDell kernel: [41935.425241] [drm] This can cause pipe underruns and display issues.
Nov  6 15:09:50 vektorDell kernel: [41935.425241] [drm] Please upgrade your BIOS to fix this.
Nov  6 15:09:50 vektorDell kernel: [41935.547594] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445360374926719801 new 18445360368594227810 attempts 1
Nov  6 15:09:50 vektorDell kernel: [41935.623760] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Nov  6 15:09:50 vektorDell kernel: [41935.731738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov  6 15:09:50 vektorDell kernel: [41935.739744] ata5: SATA link down (SStatus 0 SControl 300)
Nov  6 15:09:50 vektorDell kernel: [41935.765843] ata2.00: configured for UDMA/100
Nov  6 15:09:50 vektorDell kernel: [41935.976030] usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Nov  6 15:09:50 vektorDell kernel: [41936.328256] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
Nov  6 15:09:50 vektorDell kernel: [41936.652350] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Nov  6 15:09:50 vektorDell kernel: [41937.540921] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  6 15:09:50 vektorDell kernel: [41937.542899] ata1.00: configured for UDMA/100
Nov  6 15:09:50 vektorDell kernel: [41937.557138] sd 0:0:0:0: [sda] Starting disk
Nov  6 15:09:50 vektorDell kernel: [41937.580362] PM: resume of devices complete after 2167.055 msecs
Nov  6 15:09:50 vektorDell kernel: [41937.580567] PM: Finishing wakeup.
Nov  6 15:09:50 vektorDell kernel: [41937.580568] Restarting tasks ... done.
Nov  6 15:09:50 vektorDell kernel: [41937.594898] video LNXVIDEO:00: Restoring backlight state
Nov  6 15:09:50 vektorDell kernel: [41937.594903] video LNXVIDEO:01: Restoring backlight state
Nov  6 15:09:50 vektorDell kernel: [41937.594992] bbswitch: disabling discrete graphics
Nov  6 15:09:50 vektorDell kernel: [41937.594997] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Nov  6 15:09:50 vektorDell kernel: [41937.649081] usb 1-1.1: new high-speed USB device number 8 using ehci-pci
Nov  6 15:09:50 vektorDell kernel: [41937.713245] pci 0000:01:00.0: power state changed by ACPI to D3cold
Nov  6 15:09:50 vektorDell kernel: [41937.753835] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138
Nov  6 15:09:50 vektorDell kernel: [41937.753846] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov  6 15:09:50 vektorDell kernel: [41937.753852] usb 1-1.1: Product: USB2.0-CRW
Nov  6 15:09:50 vektorDell kernel: [41937.753856] usb 1-1.1: Manufacturer: Generic
Nov  6 15:09:50 vektorDell kernel: [41937.753860] usb 1-1.1: SerialNumber: 20090516388200000
Nov  6 15:09:50 vektorDell kernel: [41937.759977] ums-realtek 1-1.1:1.0: USB Mass Storage device detected
Nov  6 15:09:50 vektorDell kernel: [41937.779333] scsi10 : usb-storage 1-1.1:1.0
Nov  6 15:09:50 vektorDell kernel: [41937.780033] usb 1-1.1: USB disconnect, device number 8
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> wake requested (sleeping: yes  enabled: yes)
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> waking up and re-enabling...
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (wlan0): bringing up device.
Nov  6 15:10:00 vektorDell kernel: [41947.959989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
Nov  6 15:10:00 vektorDell kernel: [41947.966882] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (wlan0): preparing device.
Nov  6 15:10:00 vektorDell kernel: [41948.083160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'managed') [2]
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  6 15:10:00 vektorDell NetworkManager[865]: <info> (eth0): bringing up device.
Nov  6 15:10:01 vektorDell kernel: [41948.278947] r8169 0000:04:00.0 eth0: link down
Nov  6 15:10:01 vektorDell kernel: [41948.279168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (eth0): preparing device.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (eth0): deactivating device (reason 'managed') [2]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  6 15:10:01 vektorDell NetworkManager[865]: <warn> Trying to remove a non-existant call id.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: starting -> ready
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: ready -> inactive
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Auto-activating connection 'vektoruj'.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) starting connection 'vektoruj'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): access point 'vektoruj' has security, but secrets are required.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): connection 'vektoruj' has security, and secrets exist.  No new secrets needed.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: added 'ssid' value 'vektoruj'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: added 'scan_ssid' value '1'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: added 'auth_alg' value 'OPEN'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: added 'psk' value '<omitted>'
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> Config: set interface ap_scan to 1
Nov  6 15:10:01 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: inactive -> scanning
Nov  6 15:10:02 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:10:02 vektorDell kernel: [41949.296128] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 15:10:02 vektorDell kernel: [41949.307061] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 15:10:02 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:10:02 vektorDell kernel: [41949.308812] wlan0: authenticated
Nov  6 15:10:02 vektorDell kernel: [41949.312662] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 15:10:02 vektorDell kernel: [41949.316887] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 15:10:02 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 15:10:02 vektorDell kernel: [41949.325430] wlan0: associated
Nov  6 15:10:02 vektorDell kernel: [41949.325496] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 15:10:02 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 15:10:02 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (auth) [id=0 id_str=]
Nov  6 15:10:02 vektorDell kernel: [41949.524372] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 15:10:02 vektorDell kernel: [41949.524385] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 15:10:02 vektorDell kernel: [41949.524406] /dev/vmnet: port on hub 0 successfully opened
Nov  6 15:10:02 vektorDell kernel: [41949.524415] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 15:10:02 vektorDell kernel: [41949.524418] bridge-wlan0: up
Nov  6 15:10:02 vektorDell kernel: [41949.524421] bridge-wlan0: attached
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'vektoruj'.
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> dhclient started with pid 21095
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning IP6 addrconf.
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Nov  6 15:10:02 vektorDell dhclient: Internet Systems Consortium DHCP Client 4.2.4
Nov  6 15:10:02 vektorDell dhclient: Copyright 2004-2012 Internet Systems Consortium.
Nov  6 15:10:02 vektorDell dhclient: All rights reserved.
Nov  6 15:10:02 vektorDell dhclient: For info, please visit https://www.isc.org/software/dhcp/
Nov  6 15:10:02 vektorDell dhclient: 
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Nov  6 15:10:02 vektorDell dhclient: Listening on LPF/wlan0/ac:72:89:5c:07:5b
Nov  6 15:10:02 vektorDell dhclient: Sending on   LPF/wlan0/ac:72:89:5c:07:5b
Nov  6 15:10:02 vektorDell dhclient: Sending on   Socket/fallback
Nov  6 15:10:02 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 255.255.255.255 port 67 (xid=0x35cc4a6b)
Nov  6 15:10:02 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 15:10:02 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2812 seconds.
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Nov  6 15:10:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Nov  6 15:10:02 vektorDell kernel: [41949.724488] userif-3: sent link down event.
Nov  6 15:10:02 vektorDell kernel: [41949.724505] userif-3: sent link up event.
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> (wlan0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> (wlan0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> Policy set 'vektoruj' (wlan0) as default for IPv4 routing and DNS.
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> Writing DNS information to /sbin/resolvconf
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 15:10:03 vektorDell NetworkManager[865]: <info> Activation (wlan0) successful, device activated.
Nov  6 15:10:03 vektorDell kernel: [41950.874955] userif-3: sent link down event.
Nov  6 15:10:03 vektorDell kernel: [41950.874959] userif-3: sent link up event.
Nov  6 15:10:23 vektorDell NetworkManager[865]: <info> (wlan0): IP6 addrconf timed out or failed.
Nov  6 15:10:23 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Nov  6 15:10:23 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Nov  6 15:10:23 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:12:12 vektorDell kernel: [42079.133924] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 15:12:12 vektorDell kernel: [42079.145739] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 15:12:12 vektorDell kernel: [42079.146921] bridge-wlan0: disabling the bridge
Nov  6 15:12:12 vektorDell kernel: [42079.147405] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 15:12:12 vektorDell kernel: [42079.151402] wlan0: authenticated
Nov  6 15:12:12 vektorDell kernel: [42079.153739] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 15:12:12 vektorDell kernel: [42079.154934] cfg80211: World regulatory domain updated:
Nov  6 15:12:12 vektorDell kernel: [42079.154942] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 15:12:12 vektorDell kernel: [42079.154948] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:12:12 vektorDell kernel: [42079.154953] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:12:12 vektorDell kernel: [42079.154956] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:12:12 vektorDell kernel: [42079.154959] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:12:12 vektorDell kernel: [42079.154963] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:12:12 vektorDell kernel: [42079.157852] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=2)
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 15:12:12 vektorDell kernel: [42079.170887] wlan0: associated
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 15:12:12 vektorDell kernel: [42079.173869] bridge-wlan0: down
Nov  6 15:12:12 vektorDell kernel: [42079.173887] bridge-wlan0: detached
Nov  6 15:12:12 vektorDell kernel: [42079.346836] userif-3: sent link down event.
Nov  6 15:12:12 vektorDell kernel: [42079.346847] userif-3: sent link up event.
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 15:12:12 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 15:12:12 vektorDell kernel: [42079.371910] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 15:12:12 vektorDell kernel: [42079.371940] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 15:12:12 vektorDell kernel: [42079.372000] /dev/vmnet: port on hub 0 successfully opened
Nov  6 15:12:12 vektorDell kernel: [42079.372026] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 15:12:12 vektorDell kernel: [42079.372034] bridge-wlan0: up
Nov  6 15:12:12 vektorDell kernel: [42079.372043] bridge-wlan0: attached
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 15:12:12 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 15:12:12 vektorDell kernel: [42079.572305] userif-3: sent link down event.
Nov  6 15:12:12 vektorDell kernel: [42079.572315] userif-3: sent link up event.
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:13:35 vektorDell kernel: [42162.177423] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 15:13:35 vektorDell kernel: [42162.190380] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 15:13:35 vektorDell kernel: [42162.190646] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 15:13:35 vektorDell kernel: [42162.190751] bridge-wlan0: disabling the bridge
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to (none) ((none))
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 15:13:35 vektorDell kernel: [42162.192819] wlan0: authenticated
Nov  6 15:13:35 vektorDell kernel: [42162.196155] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 15:13:35 vektorDell kernel: [42162.197320] cfg80211: World regulatory domain updated:
Nov  6 15:13:35 vektorDell kernel: [42162.197327] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 15:13:35 vektorDell kernel: [42162.197333] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:13:35 vektorDell kernel: [42162.197338] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:13:35 vektorDell kernel: [42162.197341] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:13:35 vektorDell kernel: [42162.197344] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:13:35 vektorDell kernel: [42162.197348] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 15:13:35 vektorDell kernel: [42162.200197] bridge-wlan0: down
Nov  6 15:13:35 vektorDell kernel: [42162.200215] bridge-wlan0: detached
Nov  6 15:13:35 vektorDell kernel: [42162.200327] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 15:13:35 vektorDell kernel: [42162.209509] wlan0: associated
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 15:13:35 vektorDell kernel: [42162.390797] userif-3: sent link down event.
Nov  6 15:13:35 vektorDell kernel: [42162.390808] userif-3: sent link up event.
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 15:13:35 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 15:13:35 vektorDell kernel: [42162.414079] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 15:13:35 vektorDell kernel: [42162.414104] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 15:13:35 vektorDell kernel: [42162.414141] /dev/vmnet: port on hub 0 successfully opened
Nov  6 15:13:35 vektorDell kernel: [42162.414161] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 15:13:35 vektorDell kernel: [42162.414167] bridge-wlan0: up
Nov  6 15:13:35 vektorDell kernel: [42162.414173] bridge-wlan0: attached
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 15:13:35 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 15:13:35 vektorDell kernel: [42162.614365] userif-3: sent link down event.
Nov  6 15:13:35 vektorDell kernel: [42162.614375] userif-3: sent link up event.
Nov  6 15:13:55 vektorDell kernel: [42182.055447] /dev/vmmon[22432]: PTSC: initialized at 1993511000 Hz using TSC, TSCs are synchronized.
Nov  6 15:14:34 vektorDell kernel: [42221.025364] /dev/vmnet: open called by PID 22445 (vmx-vcpu-0)
Nov  6 15:14:34 vektorDell kernel: [42221.025379] /dev/vmnet: port on hub 8 successfully opened
Nov  6 15:14:34 vektorDell kernel: [42221.025386] /dev/vmnet: open called by PID 22445 (vmx-vcpu-0)
Nov  6 15:14:34 vektorDell kernel: [42221.025390] /dev/vmnet: port on hub 8 successfully opened
Nov  6 15:56:55 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x35cc4a6b)
Nov  6 15:56:55 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 15:56:55 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2853 seconds.
Nov  6 15:56:55 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed reboot -> renew
Nov  6 15:56:55 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 15:56:55 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 15:56:55 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 15:56:55 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 16:05:18 vektorDell kernel: [45267.174222] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 16:05:18 vektorDell kernel: [45267.184432] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 16:05:18 vektorDell kernel: [45267.184581] bridge-wlan0: disabling the bridge
Nov  6 16:05:18 vektorDell kernel: [45267.185034] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 16:05:18 vektorDell kernel: [45267.186140] wlan0: authenticated
Nov  6 16:05:18 vektorDell kernel: [45267.186626] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 16:05:18 vektorDell kernel: [45267.191920] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=2)
Nov  6 16:05:18 vektorDell kernel: [45267.194658] bridge-wlan0: down
Nov  6 16:05:18 vektorDell kernel: [45267.194666] bridge-wlan0: detached
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 16:05:18 vektorDell kernel: [45267.202791] wlan0: associated
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 16:05:18 vektorDell kernel: [45267.366272] cfg80211: World regulatory domain updated:
Nov  6 16:05:18 vektorDell kernel: [45267.366276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 16:05:18 vektorDell kernel: [45267.366279] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:05:18 vektorDell kernel: [45267.366282] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:05:18 vektorDell kernel: [45267.366284] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:05:18 vektorDell kernel: [45267.366286] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:05:18 vektorDell kernel: [45267.366288] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:05:18 vektorDell kernel: [45267.384660] userif-3: sent link down event.
Nov  6 16:05:18 vektorDell kernel: [45267.384671] userif-3: sent link up event.
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with a0:f3:c1:13:20:9f [PTK=CCMP GTK=CCMP]
Nov  6 16:05:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to a0:f3:c1:13:20:9f completed (reauth) [id=0 id_str=]
Nov  6 16:05:18 vektorDell kernel: [45267.400826] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 16:05:18 vektorDell kernel: [45267.400837] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 16:05:18 vektorDell kernel: [45267.400856] /dev/vmnet: port on hub 0 successfully opened
Nov  6 16:05:18 vektorDell kernel: [45267.400864] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 16:05:18 vektorDell kernel: [45267.400867] bridge-wlan0: up
Nov  6 16:05:18 vektorDell kernel: [45267.400869] bridge-wlan0: attached
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 16:05:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to A0:F3:C1:13:20:9F (vektoruj)
Nov  6 16:05:18 vektorDell kernel: [45267.601294] userif-3: sent link down event.
Nov  6 16:05:18 vektorDell kernel: [45267.601298] userif-3: sent link up event.
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 16:07:18 vektorDell kernel: [45387.296577] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to (none) ((none))
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 16:07:18 vektorDell kernel: [45387.311793] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 16:07:18 vektorDell kernel: [45387.311938] bridge-wlan0: disabling the bridge
Nov  6 16:07:18 vektorDell kernel: [45387.312084] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 16:07:18 vektorDell kernel: [45387.314565] cfg80211: World regulatory domain updated:
Nov  6 16:07:18 vektorDell kernel: [45387.314568] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 16:07:18 vektorDell kernel: [45387.314570] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:07:18 vektorDell kernel: [45387.314571] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:07:18 vektorDell kernel: [45387.314572] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:07:18 vektorDell kernel: [45387.314573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:07:18 vektorDell kernel: [45387.314575] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 16:07:18 vektorDell kernel: [45387.314655] wlan0: authenticated
Nov  6 16:07:18 vektorDell kernel: [45387.314763] wlan0: waiting for beacon from 74:ea:3a:c1:96:ea
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 16:07:18 vektorDell kernel: [45387.341433] bridge-wlan0: down
Nov  6 16:07:18 vektorDell kernel: [45387.341442] bridge-wlan0: detached
Nov  6 16:07:18 vektorDell kernel: [45387.365365] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 16:07:18 vektorDell kernel: [45387.369278] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 16:07:18 vektorDell kernel: [45387.377891] wlan0: associated
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 16:07:18 vektorDell kernel: [45387.512025] userif-3: sent link down event.
Nov  6 16:07:18 vektorDell kernel: [45387.512029] userif-3: sent link up event.
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 16:07:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 16:07:18 vektorDell kernel: [45387.582654] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 16:07:18 vektorDell kernel: [45387.582667] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 16:07:18 vektorDell kernel: [45387.582690] /dev/vmnet: port on hub 0 successfully opened
Nov  6 16:07:18 vektorDell kernel: [45387.582699] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 16:07:18 vektorDell kernel: [45387.582701] bridge-wlan0: up
Nov  6 16:07:18 vektorDell kernel: [45387.582704] bridge-wlan0: attached
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 16:07:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 16:07:19 vektorDell kernel: [45387.783106] userif-3: sent link down event.
Nov  6 16:07:19 vektorDell kernel: [45387.783110] userif-3: sent link up event.
Nov  6 16:44:28 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x35cc4a6b)
Nov  6 16:44:28 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 16:44:28 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 16:44:28 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 16:44:28 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 16:44:28 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 16:44:28 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 16:44:28 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 3039 seconds.
Nov  6 17:35:07 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x35cc4a6b)
Nov  6 17:35:07 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 17:35:07 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2951 seconds.
Nov  6 17:35:07 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 17:35:07 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 17:35:07 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 17:35:07 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 17:35:07 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 17:53:18 vektorDell kernel: [51751.470019] wlan0: authenticate with a0:f3:c1:13:20:9f
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=a0:f3:c1:13:20:9f reason=1
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID 74:EA:3A:C1:96:EA (vektoruj) to (none) ((none))
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: completed -> authenticating
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with a0:f3:c1:13:20:9f (SSID='vektoruj' freq=2417 MHz)
Nov  6 17:53:18 vektorDell kernel: [51751.480354] wlan0: send auth to a0:f3:c1:13:20:9f (try 1/3)
Nov  6 17:53:18 vektorDell kernel: [51751.480540] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 17:53:18 vektorDell kernel: [51751.480678] bridge-wlan0: disabling the bridge
Nov  6 17:53:18 vektorDell kernel: [51751.482057] wlan0: authenticated
Nov  6 17:53:18 vektorDell kernel: [51751.482160] wlan0: waiting for beacon from a0:f3:c1:13:20:9f
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 17:53:18 vektorDell kernel: [51751.523442] bridge-wlan0: down
Nov  6 17:53:18 vektorDell kernel: [51751.523450] bridge-wlan0: detached
Nov  6 17:53:18 vektorDell kernel: [51751.563442] wlan0: associate with a0:f3:c1:13:20:9f (try 1/3)
Nov  6 17:53:18 vektorDell kernel: [51751.572644] wlan0: RX AssocResp from a0:f3:c1:13:20:9f (capab=0x431 status=0 aid=2)
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: Associated with a0:f3:c1:13:20:9f
Nov  6 17:53:18 vektorDell kernel: [51751.580866] wlan0: associated
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 17:53:18 vektorDell kernel: [51751.634449] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=74:ea:3a:c1:96:ea reason=1
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> authenticating
Nov  6 17:53:18 vektorDell kernel: [51751.638066] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 17:53:18 vektorDell kernel: [51751.638463] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  6 17:53:18 vektorDell kernel: [51751.640368] wlan0: authenticated
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  6 17:53:18 vektorDell kernel: [51751.647475] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  6 17:53:18 vektorDell kernel: [51751.651492] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  6 17:53:18 vektorDell kernel: [51751.659843] wlan0: associated
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  6 17:53:18 vektorDell kernel: [51751.680674] userif-3: sent link down event.
Nov  6 17:53:18 vektorDell kernel: [51751.680678] userif-3: sent link up event.
Nov  6 17:53:18 vektorDell kernel: [51751.717358] cfg80211: World regulatory domain updated:
Nov  6 17:53:18 vektorDell kernel: [51751.717361] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 17:53:18 vektorDell kernel: [51751.717363] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 17:53:18 vektorDell kernel: [51751.717364] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 17:53:18 vektorDell kernel: [51751.717365] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 17:53:18 vektorDell kernel: [51751.717366] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 17:53:18 vektorDell kernel: [51751.717367] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  6 17:53:18 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (reauth) [id=0 id_str=]
Nov  6 17:53:18 vektorDell kernel: [51751.860982] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  6 17:53:18 vektorDell kernel: [51751.860995] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  6 17:53:18 vektorDell kernel: [51751.861008] /dev/vmnet: port on hub 0 successfully opened
Nov  6 17:53:18 vektorDell kernel: [51751.861016] bridge-wlan0: device is wireless, enabling SMAC
Nov  6 17:53:18 vektorDell kernel: [51751.861018] bridge-wlan0: up
Nov  6 17:53:18 vektorDell kernel: [51751.861021] bridge-wlan0: attached
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  6 17:53:18 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID (none) ((none)) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  6 17:53:19 vektorDell kernel: [51752.061247] userif-3: sent link down event.
Nov  6 17:53:19 vektorDell kernel: [51752.061259] userif-3: sent link up event.
Nov  6 18:07:28 vektorDell kernel: [52601.968063] /dev/vmnet: open called by PID 22446 (vmx-vcpu-1)
Nov  6 18:07:28 vektorDell kernel: [52601.968074] /dev/vmnet: port on hub 8 successfully opened
Nov  6 18:07:28 vektorDell kernel: [52601.968081] /dev/vmnet: open called by PID 22446 (vmx-vcpu-1)
Nov  6 18:07:28 vektorDell kernel: [52601.968084] /dev/vmnet: port on hub 8 successfully opened
Nov  6 18:07:52 vektorDell kernel: [52626.261157] /dev/vmnet: open called by PID 22445 (vmx-vcpu-0)
Nov  6 18:07:52 vektorDell kernel: [52626.261186] /dev/vmnet: port on hub 8 successfully opened
Nov  6 18:07:52 vektorDell kernel: [52626.261209] /dev/vmnet: open called by PID 22445 (vmx-vcpu-0)
Nov  6 18:07:52 vektorDell kernel: [52626.261222] /dev/vmnet: port on hub 8 successfully opened
Nov  6 18:24:18 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 192.168.1.1 port 67 (xid=0x35cc4a6b)
Nov  6 18:24:18 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  6 18:24:18 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 3282 seconds.
Nov  6 18:24:18 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed renew -> renew
Nov  6 18:24:18 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  6 18:24:18 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  6 18:24:18 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  6 18:24:18 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> sleep requested (sleeping: no  enabled: yes)
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> sleeping or disabling...
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 21095
Nov  6 19:00:56 vektorDell kernel: [55812.150739] wlan0: deauthenticating from 74:ea:3a:c1:96:ea by local choice (reason=3)
Nov  6 19:00:56 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
Nov  6 19:00:56 vektorDell NetworkManager[865]: <warn> DNS: plugin dnsmasq update failed
Nov  6 19:00:56 vektorDell NetworkManager[865]: <info> Removing DNS information from /sbin/resolvconf
Nov  6 19:00:56 vektorDell kernel: [55812.173508] bridge-wlan0: disabling the bridge
Nov  6 19:00:56 vektorDell kernel: [55812.173916] cfg80211: Calling CRDA to update world regulatory domain
Nov  6 19:00:56 vektorDell kernel: [55812.192222] bridge-wlan0: down
Nov  6 19:00:56 vektorDell kernel: [55812.192241] bridge-wlan0: detached
Nov  6 19:00:56 vektorDell kernel: [55812.351025] userif-3: sent link down event.
Nov  6 19:00:56 vektorDell kernel: [55812.351036] userif-3: sent link up event.
Nov  6 19:00:57 vektorDell NetworkManager[865]: <info> (wlan0): cleaning up...
Nov  6 19:00:57 vektorDell NetworkManager[865]: <info> (wlan0): taking down device.
Nov  6 19:00:57 vektorDell NetworkManager[865]: <info> (eth0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Nov  6 19:00:57 vektorDell NetworkManager[865]: <info> (eth0): cleaning up...
Nov  6 19:00:57 vektorDell NetworkManager[865]: <info> (eth0): taking down device.
Nov  6 19:00:59 vektorDell kernel: [55815.194664] cfg80211: World regulatory domain updated:
Nov  6 19:00:59 vektorDell kernel: [55815.194675] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov  6 19:00:59 vektorDell kernel: [55815.194681] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 19:00:59 vektorDell kernel: [55815.194685] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 19:00:59 vektorDell kernel: [55815.194689] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov  6 19:00:59 vektorDell kernel: [55815.194692] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 19:00:59 vektorDell kernel: [55815.194695] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov  6 19:01:23 vektorDell kernel: [55839.064217] PM: Syncing filesystems ... done.
Nov  6 19:01:23 vektorDell kernel: [55839.381880] PM: Preparing system for mem sleep
Nov  6 19:01:23 vektorDell kernel: [55839.443095] bbswitch: enabling discrete graphics
Nov  7 07:11:43 vektorDell kernel: [55839.802844] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  7 07:11:43 vektorDell kernel: [55839.802919] Freezing user space processes ... (elapsed 0.001 seconds) done.
Nov  7 07:11:43 vektorDell kernel: [55839.804462] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Nov  7 07:11:43 vektorDell kernel: [55839.805727] PM: Entering mem sleep
Nov  7 07:11:43 vektorDell kernel: [55839.805766] Suspending console(s) (use no_console_suspend to debug)
Nov  7 07:11:43 vektorDell kernel: [55839.805980] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov  7 07:11:43 vektorDell kernel: [55839.817013] sd 0:0:0:0: [sda] Stopping disk
Nov  7 07:11:43 vektorDell kernel: [55839.819138] mei_me 0000:00:16.0: suspend
Nov  7 07:11:43 vektorDell kernel: [55840.518842] PM: suspend of devices complete after 712.498 msecs
Nov  7 07:11:43 vektorDell kernel: [55840.518989] PM: late suspend of devices complete after 0.145 msecs
Nov  7 07:11:43 vektorDell kernel: [55840.519185] r8169 0000:04:00.0: System wakeup enabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55840.534825] xhci_hcd 0000:03:00.0: System wakeup enabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55840.566909] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55840.582970] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55840.614845] PM: noirq suspend of devices complete after 95.788 msecs
Nov  7 07:11:43 vektorDell kernel: [55840.615653] ACPI: Preparing to enter system sleep state S3
Nov  7 07:11:43 vektorDell kernel: [55840.616914] PM: Saving platform NVS memory
Nov  7 07:11:43 vektorDell kernel: [55840.617666] Disabling non-boot CPUs ...
Nov  7 07:11:43 vektorDell kernel: [55840.619144] smpboot: CPU 1 is now offline
Nov  7 07:11:43 vektorDell kernel: [55840.722817] smpboot: CPU 2 is now offline
Nov  7 07:11:43 vektorDell kernel: [55840.723545] Broke affinity for irq 49
Nov  7 07:11:43 vektorDell kernel: [55840.826892] smpboot: CPU 3 is now offline
Nov  7 07:11:43 vektorDell kernel: [55840.930940] smpboot: CPU 4 is now offline
Nov  7 07:11:43 vektorDell kernel: [55841.035020] smpboot: CPU 5 is now offline
Nov  7 07:11:43 vektorDell kernel: [55841.139081] smpboot: CPU 6 is now offline
Nov  7 07:11:43 vektorDell kernel: [55841.139585] Broke affinity for irq 23
Nov  7 07:11:43 vektorDell kernel: [55841.243140] smpboot: CPU 7 is now offline
Nov  7 07:11:43 vektorDell kernel: [55841.244743] ACPI: Low-level resume complete
Nov  7 07:11:43 vektorDell kernel: [55841.244786] PM: Restoring platform NVS memory
Nov  7 07:11:43 vektorDell kernel: [55841.245550] CPU0: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.245649] Enabling non-boot CPUs ...
Nov  7 07:11:43 vektorDell kernel: [55841.245685] smpboot: Booting Node 0 Processor 1 APIC 0x1
Nov  7 07:11:43 vektorDell kernel: [55841.256638] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.256656] CPU1: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.259181] CPU1 is up
Nov  7 07:11:43 vektorDell kernel: [55841.259199] smpboot: Booting Node 0 Processor 2 APIC 0x2
Nov  7 07:11:43 vektorDell kernel: [55841.270249] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.270267] CPU2: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.272670] CPU2 is up
Nov  7 07:11:43 vektorDell kernel: [55841.272688] smpboot: Booting Node 0 Processor 3 APIC 0x3
Nov  7 07:11:43 vektorDell kernel: [55841.283735] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.283752] CPU3: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.286174] CPU3 is up
Nov  7 07:11:43 vektorDell kernel: [55841.286191] smpboot: Booting Node 0 Processor 4 APIC 0x4
Nov  7 07:11:43 vektorDell kernel: [55841.297240] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.297258] CPU4: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.299671] CPU4 is up
Nov  7 07:11:43 vektorDell kernel: [55841.299688] smpboot: Booting Node 0 Processor 5 APIC 0x5
Nov  7 07:11:43 vektorDell kernel: [55841.310736] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.310753] CPU5: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.313195] CPU5 is up
Nov  7 07:11:43 vektorDell kernel: [55841.313215] smpboot: Booting Node 0 Processor 6 APIC 0x6
Nov  7 07:11:43 vektorDell kernel: [55841.324265] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.324282] CPU6: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.326736] CPU6 is up
Nov  7 07:11:43 vektorDell kernel: [55841.326753] smpboot: Booting Node 0 Processor 7 APIC 0x7
Nov  7 07:11:43 vektorDell kernel: [55841.337800] Disabled fast string operations
Nov  7 07:11:43 vektorDell kernel: [55841.337817] CPU7: Thermal monitoring handled by SMI
Nov  7 07:11:43 vektorDell kernel: [55841.340280] CPU7 is up
Nov  7 07:11:43 vektorDell kernel: [55841.348905] ACPI: Waking up from system sleep state S3
Nov  7 07:11:43 vektorDell kernel: [55841.413369] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55841.445373] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55841.461418] pci 0000:01:00.0: power state changed by ACPI to D0
Nov  7 07:11:43 vektorDell kernel: [55841.493439] xhci_hcd 0000:03:00.0: System wakeup disabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55841.509525] PM: noirq resume of devices complete after 143.826 msecs
Nov  7 07:11:43 vektorDell kernel: [55841.509684] PM: early resume of devices complete after 0.114 msecs
Nov  7 07:11:43 vektorDell kernel: [55841.509708] i915 0000:00:02.0: setting latency timer to 64
Nov  7 07:11:43 vektorDell kernel: [55841.509754] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
Nov  7 07:11:43 vektorDell kernel: [55841.509767] ahci 0000:00:1f.2: setting latency timer to 64
Nov  7 07:11:43 vektorDell kernel: [55841.509808] ehci-pci 0000:00:1a.0: setting latency timer to 64
Nov  7 07:11:43 vektorDell kernel: [55841.509849] r8169 0000:04:00.0: System wakeup disabled by ACPI
Nov  7 07:11:43 vektorDell kernel: [55841.509928] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Nov  7 07:11:43 vektorDell kernel: [55841.509965] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
Nov  7 07:11:43 vektorDell kernel: [55841.510095] ehci-pci 0000:00:1d.0: setting latency timer to 64
Nov  7 07:11:43 vektorDell kernel: [55841.523852] [drm] Wrong MCH_SSKPD value: 0x16040307
Nov  7 07:11:43 vektorDell kernel: [55841.523853] [drm] This can cause pipe underruns and display issues.
Nov  7 07:11:43 vektorDell kernel: [55841.523853] [drm] Please upgrade your BIOS to fix this.
Nov  7 07:11:43 vektorDell kernel: [55841.573375] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445360368594227810 new 18445360324778871781 attempts 1
Nov  7 07:11:43 vektorDell kernel: [55841.721711] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Nov  7 07:11:43 vektorDell kernel: [55841.837542] ata5: SATA link down (SStatus 0 SControl 300)
Nov  7 07:11:43 vektorDell kernel: [55841.837574] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov  7 07:11:43 vektorDell kernel: [55841.871674] ata2.00: configured for UDMA/100
Nov  7 07:11:43 vektorDell kernel: [55842.073883] usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Nov  7 07:11:43 vektorDell kernel: [55842.426175] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
Nov  7 07:11:43 vektorDell kernel: [55842.778203] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Nov  7 07:11:43 vektorDell kernel: [55843.694797] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov  7 07:11:43 vektorDell kernel: [55843.696946] ata1.00: configured for UDMA/100
Nov  7 07:11:43 vektorDell kernel: [55843.711012] sd 0:0:0:0: [sda] Starting disk
Nov  7 07:11:43 vektorDell kernel: [55843.736072] PM: resume of devices complete after 2224.926 msecs
Nov  7 07:11:43 vektorDell kernel: [55843.736274] PM: Finishing wakeup.
Nov  7 07:11:43 vektorDell kernel: [55843.736276] Restarting tasks ... done.
Nov  7 07:11:43 vektorDell kernel: [55843.754738] video LNXVIDEO:00: Restoring backlight state
Nov  7 07:11:43 vektorDell kernel: [55843.754743] video LNXVIDEO:01: Restoring backlight state
Nov  7 07:11:43 vektorDell kernel: [55843.754881] bbswitch: disabling discrete graphics
Nov  7 07:11:43 vektorDell kernel: [55843.754890] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Nov  7 07:11:43 vektorDell kernel: [55843.806954] usb 1-1.1: new high-speed USB device number 9 using ehci-pci
Nov  7 07:11:43 vektorDell kernel: [55843.874952] pci 0000:01:00.0: power state changed by ACPI to D3cold
Nov  7 07:11:43 vektorDell kernel: [55844.157550] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138
Nov  7 07:11:43 vektorDell kernel: [55844.157561] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov  7 07:11:43 vektorDell kernel: [55844.157567] usb 1-1.1: Product: USB2.0-CRW
Nov  7 07:11:43 vektorDell kernel: [55844.157579] usb 1-1.1: Manufacturer: Generic
Nov  7 07:11:43 vektorDell kernel: [55844.157581] usb 1-1.1: SerialNumber: 20090516388200000
Nov  7 07:11:43 vektorDell kernel: [55844.163251] ums-realtek 1-1.1:1.0: USB Mass Storage device detected
Nov  7 07:11:43 vektorDell kernel: [55844.182226] scsi11 : usb-storage 1-1.1:1.0
Nov  7 07:11:44 vektorDell kernel: [55844.329078] usb 1-1.1: USB disconnect, device number 9
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> wake requested (sleeping: yes  enabled: yes)
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> waking up and re-enabling...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): bringing up device.
Nov  7 07:11:58 vektorDell kernel: [55858.289162] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
Nov  7 07:11:58 vektorDell kernel: [55858.296104] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): preparing device.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): deactivating device (reason 'managed') [2]
Nov  7 07:11:58 vektorDell kernel: [55858.411950] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (eth0): bringing up device.
Nov  7 07:11:58 vektorDell kernel: [55858.603509] r8169 0000:04:00.0 eth0: link down
Nov  7 07:11:58 vektorDell kernel: [55858.603622] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (eth0): preparing device.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (eth0): deactivating device (reason 'managed') [2]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  7 07:11:58 vektorDell NetworkManager[865]: <warn> Trying to remove a non-existant call id.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: starting -> ready
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: ready -> inactive
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0) supports 5 scan SSIDs
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Auto-activating connection 'vektoruj'.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) starting connection 'vektoruj'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): access point 'vektoruj' has security, but secrets are required.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless): connection 'vektoruj' has security, and secrets exist.  No new secrets needed.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: added 'ssid' value 'vektoruj'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: added 'scan_ssid' value '1'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: added 'auth_alg' value 'OPEN'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: added 'psk' value '<omitted>'
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Nov  7 07:11:58 vektorDell NetworkManager[865]: <info> Config: set interface ap_scan to 1
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: inactive -> scanning
Nov  7 07:11:59 vektorDell wpa_supplicant[935]: wlan0: SME: Trying to authenticate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  7 07:11:59 vektorDell kernel: [55859.814416] wlan0: authenticate with 74:ea:3a:c1:96:ea
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Nov  7 07:11:59 vektorDell kernel: [55859.825855] wlan0: send auth to 74:ea:3a:c1:96:ea (try 1/3)
Nov  7 07:11:59 vektorDell wpa_supplicant[935]: wlan0: Trying to associate with 74:ea:3a:c1:96:ea (SSID='vektoruj' freq=2417 MHz)
Nov  7 07:11:59 vektorDell kernel: [55859.929483] wlan0: send auth to 74:ea:3a:c1:96:ea (try 2/3)
Nov  7 07:11:59 vektorDell kernel: [55859.931406] wlan0: authenticated
Nov  7 07:11:59 vektorDell kernel: [55859.933441] wlan0: associate with 74:ea:3a:c1:96:ea (try 1/3)
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: authenticating -> associating
Nov  7 07:11:59 vektorDell kernel: [55859.937595] wlan0: RX AssocResp from 74:ea:3a:c1:96:ea (capab=0x431 status=0 aid=1)
Nov  7 07:11:59 vektorDell wpa_supplicant[935]: wlan0: Associated with 74:ea:3a:c1:96:ea
Nov  7 07:11:59 vektorDell kernel: [55859.946307] wlan0: associated
Nov  7 07:11:59 vektorDell kernel: [55859.946382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associating -> associated
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Nov  7 07:11:59 vektorDell wpa_supplicant[935]: wlan0: WPA: Key negotiation completed with 74:ea:3a:c1:96:ea [PTK=CCMP GTK=TKIP]
Nov  7 07:11:59 vektorDell wpa_supplicant[935]: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:ea:3a:c1:96:ea completed (auth) [id=0 id_str=]
Nov  7 07:11:59 vektorDell kernel: [55860.149096] /dev/vmnet: open called by PID 1818 (vmnet-bridge)
Nov  7 07:11:59 vektorDell kernel: [55860.149128] /dev/vmnet: hub 0 does not exist, allocating memory.
Nov  7 07:11:59 vektorDell kernel: [55860.149193] /dev/vmnet: port on hub 0 successfully opened
Nov  7 07:11:59 vektorDell kernel: [55860.149222] bridge-wlan0: device is wireless, enabling SMAC
Nov  7 07:11:59 vektorDell kernel: [55860.149230] bridge-wlan0: up
Nov  7 07:11:59 vektorDell kernel: [55860.149238] bridge-wlan0: attached
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'vektoruj'.
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> dhclient started with pid 25612
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Beginning IP6 addrconf.
Nov  7 07:11:59 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Nov  7 07:12:00 vektorDell dhclient: Internet Systems Consortium DHCP Client 4.2.4
Nov  7 07:12:00 vektorDell dhclient: Copyright 2004-2012 Internet Systems Consortium.
Nov  7 07:12:00 vektorDell dhclient: All rights reserved.
Nov  7 07:12:00 vektorDell dhclient: For info, please visit https://www.isc.org/software/dhcp/
Nov  7 07:12:00 vektorDell dhclient: 
Nov  7 07:12:00 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Nov  7 07:12:00 vektorDell dhclient: Listening on LPF/wlan0/ac:72:89:5c:07:5b
Nov  7 07:12:00 vektorDell dhclient: Sending on   LPF/wlan0/ac:72:89:5c:07:5b
Nov  7 07:12:00 vektorDell dhclient: Sending on   Socket/fallback
Nov  7 07:12:00 vektorDell dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 (xid=0x17b50f04)
Nov  7 07:12:00 vektorDell kernel: [55860.349438] userif-3: sent link down event.
Nov  7 07:12:00 vektorDell kernel: [55860.349444] userif-3: sent link up event.
Nov  7 07:12:01 vektorDell dhclient: DHCPREQUEST of 192.168.1.105 on wlan0 to 255.255.255.255 port 67 (xid=0x17b50f04)
Nov  7 07:12:01 vektorDell dhclient: DHCPOFFER of 192.168.1.105 from 192.168.1.1
Nov  7 07:12:01 vektorDell dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1
Nov  7 07:12:01 vektorDell dhclient: bound to 192.168.1.105 -- renewal in 2727 seconds.
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info>   address 192.168.1.105
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info>   prefix 24 (255.255.255.0)
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info>   gateway 192.168.1.1
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info>   nameserver '192.168.1.1'
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Nov  7 07:12:01 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Nov  7 07:12:01 vektorDell kernel: [55861.585802] userif-3: sent link down event.
Nov  7 07:12:01 vektorDell kernel: [55861.585812] userif-3: sent link up event.
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> (wlan0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> (wlan0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> Policy set 'vektoruj' (wlan0) as default for IPv4 routing and DNS.
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> Writing DNS information to /sbin/resolvconf
Nov  7 07:12:02 vektorDell kernel: [55862.676224] userif-3: sent link down event.
Nov  7 07:12:02 vektorDell kernel: [55862.676237] userif-3: sent link up event.
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> (wlan0): roamed from BSSID A0:F3:C1:13:20:9F (vektoruj) to 74:EA:3A:C1:96:EA (vektoruj)
Nov  7 07:12:02 vektorDell NetworkManager[865]: <info> Activation (wlan0) successful, device activated.
Nov  7 07:12:19 vektorDell NetworkManager[865]: <info> (wlan0): IP6 addrconf timed out or failed.
Nov  7 07:12:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Nov  7 07:12:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Nov  7 07:12:19 vektorDell NetworkManager[865]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.