[ 19.449452] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 19.449458] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 19.449462] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 19.449467] tg3 0000:02:00.0: irq 50 for MSI/MSI-X [ 20.014108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.014497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.024549] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.024804] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.611795] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x300000 [ IBUS ] [ 20.611853] nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c) [ 22.613726] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out [ 22.613735] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000244 [ 22.613746] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 22.613755] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009 [ 22.613759] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300 [ 22.613764] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 22.613769] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 22.613771] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16 [ 34.829951] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input14 [ 34.830278] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:14.0-3:1 [ 43.753298] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ] [ 43.753370] nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c) [ 43.753423] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0xbadf1008 FAULT at 0x419cc0 [ IBUS ] [ 45.755264] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out [ 45.755271] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000244 [ 45.755280] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 45.755289] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009 [ 45.755293] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300 [ 45.755297] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 45.755302] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000 [ 45.755303] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16 [ 46.780338] dconf worker[4756]: segfault at 8 ip 00007f46e3b0dd2c sp 00007f46e15f3b30 error 4 in libgio-2.0.so.0.3706.0[7f46e3a60000+167000] [ 133.859023] wlan0: authenticate with bc:05:43:0f:28:7a [ 133.873702] wlan0: send auth to bc:05:43:0f:28:7a (try 1/3) [ 133.875198] wlan0: authenticated [ 133.878060] wlan0: associate with bc:05:43:0f:28:7a (try 1/3) [ 133.879868] wlan0: RX AssocResp from bc:05:43:0f:28:7a (capab=0x411 status=0 aid=1) [ 133.879932] wlan0: associated [ 133.879948] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 133.880074] cfg80211: Calling CRDA for country: DE [ 133.885412] ath: regdomain 0x8114 updated by CountryIE [ 133.885418] ath: EEPROM regdomain: 0x8114 [ 133.885420] ath: EEPROM indicates we should expect a country code [ 133.885422] ath: doing EEPROM country->regdmn map search [ 133.885424] ath: country maps to regdmn code: 0x37 [ 133.885426] ath: Country alpha2 being used: DE [ 133.885428] ath: Regpair used: 0x37 [ 133.885457] cfg80211: Regulatory domain changed to country: DE [ 133.885459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 133.885462] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.885465] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.885467] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.885469] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 133.885472] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 133.890740] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by bc:05:43:0f:28:7a [ 257.789153] mmc0: Card removed during transfer! [ 257.789164] mmc0: Resetting controller. [ 261.542572] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock [ 261.542598] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 261.554872] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 261.565122] mmc0: Controller never released inhibit bit(s). [ 271.579046] mmc0: Timeout waiting for hardware interrupt. [ 271.579213] mmcblk0: error -110 sending status command, retrying [ 271.580619] mmcblk0: unknown error -5 sending read/write command, card status 0x900 [ 271.580629] end_request: I/O error, dev mmcblk0, sector 0 [ 271.580635] Buffer I/O error on device mmcblk0, logical block 0 [ 271.591772] ldm_validate_partition_table(): Disk read failed. [ 271.591783] Dev mmcblk0: unable to read RDB block 0 [ 271.592783] mmcblk0: unable to read partition table [ 318.160701] systemd-hostnamed[5946]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!