[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-29-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #42-Ubuntu SMP Tue Aug 13 19:40:39 UTC 2013 (Ubuntu 3.8.0-29.42-generic 3.8.13.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic root=UUID=458f02a8-bf3a-4094-a0f1-4531332ebc9f ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/Crosshair IV Formula, BIOS 1102 08/24/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfe8ffff] [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x22fffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] [mem 0x200000000-0x22fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfe8e000-0xcfe8ffff] [ 0.000000] RAMDISK: [mem 0x36104000-0x37079fff] [ 0.000000] ACPI: RSDP 00000000000fbed0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 082410 XSDT1804 20100824 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 082410 FACP1804 20100824 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cfe90460 0F42B (v01 A1595 A1595000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cfea8000 00040 [ 0.000000] ACPI: APIC 00000000cfe90390 00088 (v01 082410 APIC1804 20100824 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90420 0003C (v01 082410 OEMMCFG 20100824 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 082410 OEMB1804 20100824 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cfe9f8b0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cfe9f9c0 00038 (v01 082410 OEMHPET 20100824 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cfe9fa00 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff] [ 0.000000] NODE_DATA [mem 0x22fffb000-0x22fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x22fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff] [ 0.000000] node 0: [mem 0x100000000-0x22fffffff] [ 0.000000] On node 0 totalpages: 2096666 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13243 pages used for memmap [ 0.000000] DMA32 zone: 834261 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000 [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000 [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] e820: [mem 0xcff00000-0xffdfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85056 r8192 d21440 u262144 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063897 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic root=UUID=458f02a8-bf3a-4094-a0f1-4531332ebc9f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e606000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8091676k/9175040k available (7013k kernel code, 788376k absent, 294988k reserved, 6229k data, 996k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] NR_IRQS:16640 nr_irqs:1272 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3210.843 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.68 BogoMIPS (lpj=12843372) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000032] AppArmor: AppArmor initialized [ 0.000033] Yama: becoming mindful. [ 0.000412] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002282] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003134] Mount-cache hash table entries: 256 [ 0.003270] Initializing cgroup subsys cpuacct [ 0.003271] Initializing cgroup subsys memory [ 0.003277] Initializing cgroup subsys devices [ 0.003278] Initializing cgroup subsys freezer [ 0.003280] Initializing cgroup subsys blkio [ 0.003281] Initializing cgroup subsys perf_event [ 0.003283] Initializing cgroup subsys hugetlb [ 0.003302] tseg: 0000000000 [ 0.003312] CPU: Physical Processor ID: 0 [ 0.003313] CPU: Processor Core ID: 0 [ 0.003314] mce: CPU supports 6 MCE banks [ 0.003319] LVT offset 0 assigned for vector 0xf9 [ 0.003324] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.003324] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.003324] tlb_flushall_shift: 4 [ 0.003402] Freeing SMP alternatives: 24k freed [ 0.004535] ACPI: Core revision 20121018 [ 0.097711] ftrace: allocating 26712 entries in 105 pages [ 0.106363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.145933] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (fam: 10, model: 0a, stepping: 00) [ 0.251153] Performance Events: AMD PMU driver. [ 0.251156] ... version: 0 [ 0.251157] ... bit width: 48 [ 0.251158] ... generic registers: 4 [ 0.251159] ... value mask: 0000ffffffffffff [ 0.251159] ... max period: 00007fffffffffff [ 0.251160] ... fixed-purpose events: 0 [ 0.251161] ... event mask: 000000000000000f [ 0.251919] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.251974] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.317166] Brought up 6 CPUs [ 0.317168] smpboot: Total of 6 processors activated (38530.11 BogoMIPS) [ 0.324031] devtmpfs: initialized [ 0.325222] EVM: security.selinux [ 0.325223] EVM: security.SMACK64 [ 0.325224] EVM: security.capability [ 0.325317] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes) [ 0.326033] regulator-dummy: no parameters [ 0.326074] NET: Registered protocol family 16 [ 0.326143] node 0 link 0: io port [1000, ffffff] [ 0.326145] TOM: 00000000d0000000 aka 3328M [ 0.326147] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.326149] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.326151] node 0 link 0: mmio [f0000000, ffffffff] [ 0.326153] node 0 link 0: mmio [a0000, bffff] [ 0.326154] node 0 link 0: mmio [d0000000, dfffffff] [ 0.326155] TOM2: 0000000230000000 aka 8960M [ 0.326156] bus: [bus 00-07] on node 0 link 0 [ 0.326157] bus: 00 [io 0x0000-0xffff] [ 0.326158] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.326159] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.326160] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.326161] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.326265] ACPI: bus type pci registered [ 0.326307] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.326309] PCI: not using MMCONFIG [ 0.326311] PCI: Using configuration type 1 for base access [ 0.326311] PCI: Using configuration type 1 for extended access [ 0.326486] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.326487] mtrr: probably your BIOS does not setup all CPUs. [ 0.326487] mtrr: corrected configuration. [ 0.327078] bio: create slab at 0 [ 0.327150] ACPI: Added _OSI(Module Device) [ 0.327151] ACPI: Added _OSI(Processor Device) [ 0.327152] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.327153] ACPI: Added _OSI(Processor Aggregator Device) [ 0.327987] ACPI: EC: Look up EC in DSDT [ 0.328860] ACPI: Executed 3 blocks of module-level executable AML code [ 0.536808] ACPI: Interpreter enabled [ 0.536814] ACPI: (supports S0 S1 S3 S4 S5) [ 0.536827] ACPI: Using IOAPIC for interrupt routing [ 0.536845] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.537609] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.548452] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.548523] ACPI: No dock devices found. [ 0.548526] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.548576] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.548577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.548784] PCI host bridge to bus 0000:00 [ 0.548786] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.548788] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.548790] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.548791] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.548792] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.548794] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.548795] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.548804] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 0.548857] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.548884] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.548896] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.548922] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.548932] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.548957] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.548968] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.548993] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.549003] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.549029] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.549052] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.549067] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] [ 0.549074] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] [ 0.549081] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] [ 0.549087] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] [ 0.549094] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 0.549101] pci 0000:00:11.0: reg 24: [mem 0xfcbfe000-0xfcbfe3ff] [ 0.549150] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.549159] pci 0000:00:12.0: reg 10: [mem 0xfcbf7000-0xfcbf7fff] [ 0.549210] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.549223] pci 0000:00:12.2: reg 10: [mem 0xfcbfe400-0xfcbfe4ff] [ 0.549281] pci 0000:00:12.2: supports D1 D2 [ 0.549282] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.549298] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.549308] pci 0000:00:13.0: reg 10: [mem 0xfcbfc000-0xfcbfcfff] [ 0.549357] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.549370] pci 0000:00:13.2: reg 10: [mem 0xfcbfe800-0xfcbfe8ff] [ 0.549428] pci 0000:00:13.2: supports D1 D2 [ 0.549429] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.549445] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.549499] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.549514] pci 0000:00:14.2: reg 10: [mem 0xfcbf8000-0xfcbfbfff 64bit] [ 0.549561] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.549571] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.549624] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.549654] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.549663] pci 0000:00:14.5: reg 10: [mem 0xfcbfd000-0xfcbfdfff] [ 0.549711] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.549721] pci 0000:00:16.0: reg 10: [mem 0xfcbff000-0xfcbfffff] [ 0.549771] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.549784] pci 0000:00:16.2: reg 10: [mem 0xfcbfec00-0xfcbfecff] [ 0.549841] pci 0000:00:16.2: supports D1 D2 [ 0.549843] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.549857] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.549870] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.549879] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.549889] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.549901] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.549941] pci 0000:06:00.0: [10de:1080] type 00 class 0x030000 [ 0.549949] pci 0000:06:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.549957] pci 0000:06:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.549965] pci 0000:06:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.549971] pci 0000:06:00.0: reg 24: [io 0xec00-0xec7f] [ 0.549977] pci 0000:06:00.0: reg 30: [mem 0xfe980000-0xfe9fffff pref] [ 0.550023] pci 0000:06:00.1: [10de:0e09] type 00 class 0x040300 [ 0.550031] pci 0000:06:00.1: reg 10: [mem 0xfe97c000-0xfe97ffff] [ 0.556493] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.556498] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.556500] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.556503] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.556537] pci 0000:05:00.0: [197b:2363] type 00 class 0x010185 [ 0.556598] pci 0000:05:00.0: reg 24: [mem 0xfcffe000-0xfcffffff] [ 0.556644] pci 0000:05:00.0: PME# supported from D3hot [ 0.556667] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 0.556684] pci 0000:05:00.1: reg 10: [io 0xdc00-0xdc07] [ 0.556694] pci 0000:05:00.1: reg 14: [io 0xd880-0xd883] [ 0.556703] pci 0000:05:00.1: reg 18: [io 0xd800-0xd807] [ 0.556713] pci 0000:05:00.1: reg 1c: [io 0xd480-0xd483] [ 0.556726] pci 0000:05:00.1: reg 20: [io 0xd400-0xd40f] [ 0.556784] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.556790] pci 0000:00:04.0: PCI bridge to [bus 05] [ 0.556792] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.556794] pci 0000:00:04.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.556824] pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.556839] pci 0000:04:00.0: reg 10: [mem 0xfceff800-0xfcefffff 64bit] [ 0.556847] pci 0000:04:00.0: reg 18: [io 0xc800-0xc8ff] [ 0.556909] pci 0000:04:00.0: supports D2 [ 0.556911] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold [ 0.564469] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.564474] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.564476] pci 0000:00:05.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.564510] pci 0000:03:00.0: [11ab:4381] type 00 class 0x020000 [ 0.564527] pci 0000:03:00.0: reg 10: [mem 0xfcdfc000-0xfcdfffff 64bit] [ 0.564535] pci 0000:03:00.0: reg 18: [io 0xb800-0xb8ff] [ 0.564563] pci 0000:03:00.0: reg 30: [mem 0xfcdc0000-0xfcddffff pref] [ 0.564602] pci 0000:03:00.0: supports D1 D2 [ 0.564603] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.572446] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.572450] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.572452] pci 0000:00:06.0: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.572487] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.572501] pci 0000:02:00.0: reg 10: [mem 0xfccfe000-0xfccfffff 64bit] [ 0.572568] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.580421] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.580426] pci 0000:00:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.580477] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.580484] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.580485] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.580487] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.580488] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.580490] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.580491] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.580513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.580539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT] [ 0.580562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] [ 0.580578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] [ 0.580594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT] [ 0.580621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.580718] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.580802] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.581524] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15) [ 0.581561] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.581598] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.581633] ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 14 15) [ 0.581662] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15) [ 0.581683] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15) [ 0.581703] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 0.581723] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. [ 0.581803] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.581805] vgaarb: loaded [ 0.581805] vgaarb: bridge control possible 0000:06:00.0 [ 0.581921] SCSI subsystem initialized [ 0.581923] ACPI: bus type scsi registered [ 0.581989] libata version 3.00 loaded. [ 0.582001] ACPI: bus type usb registered [ 0.582013] usbcore: registered new interface driver usbfs [ 0.582020] usbcore: registered new interface driver hub [ 0.582037] usbcore: registered new device driver usb [ 0.582102] PCI: Using ACPI for IRQ routing [ 0.587986] PCI: pci_cache_line_size set to 64 bytes [ 0.588040] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 0.588041] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff] [ 0.588097] NetLabel: Initializing [ 0.588098] NetLabel: domain hash size = 128 [ 0.588099] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.588105] NetLabel: unlabeled traffic allowed by default [ 0.588157] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.588160] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.590175] Switching to clocksource hpet [ 0.593705] AppArmor: AppArmor Filesystem Enabled [ 0.593720] pnp: PnP ACPI init [ 0.593727] ACPI: bus type pnp registered [ 0.593821] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.593824] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.593858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.593899] pnp 00:02: [dma 4] [ 0.593914] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.593935] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.593949] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.593967] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.594002] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.594064] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.594066] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.594068] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.594226] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.594228] system 00:08: [io 0x040b] has been reserved [ 0.594230] system 00:08: [io 0x04d6] has been reserved [ 0.594231] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.594232] system 00:08: [io 0x0c14] has been reserved [ 0.594234] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 0.594235] system 00:08: [io 0x0c52] has been reserved [ 0.594236] system 00:08: [io 0x0c6c] has been reserved [ 0.594238] system 00:08: [io 0x0c6f] has been reserved [ 0.594239] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.594241] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.594242] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.594245] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.594246] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.594248] system 00:08: [io 0x0800-0x089f] has been reserved [ 0.594249] system 00:08: [io 0x0b00-0x0b1f] has been reserved [ 0.594250] system 00:08: [io 0x0b20-0x0b3f] has been reserved [ 0.594252] system 00:08: [io 0x0900-0x090f] has been reserved [ 0.594253] system 00:08: [io 0x0910-0x091f] has been reserved [ 0.594255] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 0.594257] system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.594258] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.594260] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.594261] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.594263] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.594391] system 00:09: [io 0x0230-0x023f] has been reserved [ 0.594393] system 00:09: [io 0x0290-0x029f] has been reserved [ 0.594394] system 00:09: [io 0x0f40-0x0f4f] has been reserved [ 0.594395] system 00:09: [io 0x0a30-0x0a3f] has been reserved [ 0.594397] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.594433] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.594435] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.594513] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.594515] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.594517] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.594518] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved [ 0.594519] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.594521] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.594577] pnp: PnP ACPI: found 12 devices [ 0.594578] ACPI: ACPI bus type pnp unregistered [ 0.600421] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.600423] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.600426] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.600428] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.600430] pci 0000:00:04.0: PCI bridge to [bus 05] [ 0.600432] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.600434] pci 0000:00:04.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.600437] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.600438] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.600441] pci 0000:00:05.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.600444] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.600445] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.600447] pci 0000:00:06.0: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.600450] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.600452] pci 0000:00:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.600455] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.600483] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.600484] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.600486] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.600487] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.600488] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.600489] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.600491] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.600492] pci_bus 0000:06: resource 1 [mem 0xfd000000-0xfe9fffff] [ 0.600493] pci_bus 0000:06: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.600495] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.600496] pci_bus 0000:05: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.600498] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.600499] pci_bus 0000:04: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.600500] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.600501] pci_bus 0000:03: resource 1 [mem 0xfcd00000-0xfcdfffff] [ 0.600503] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.600504] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.600506] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.600507] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.600508] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.600510] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.600511] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.600536] NET: Registered protocol family 2 [ 0.600664] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.600920] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.601141] TCP: Hash tables configured (established 65536 bind 65536) [ 0.601173] TCP: reno registered [ 0.601180] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.601219] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.601291] NET: Registered protocol family 1 [ 1.647276] pci 0000:06:00.0: Boot video device [ 1.647322] PCI: CLS 64 bytes, default 64 [ 1.647355] Trying to unpack rootfs image as initramfs... [ 1.829792] Freeing initrd memory: 15832k freed [ 1.833967] PCI-DMA: Disabling AGP. [ 1.834067] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.834068] PCI-DMA: using GART IOMMU. [ 1.834070] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.837321] LVT offset 1 assigned for vector 0x400 [ 1.837331] IBS: LVT offset 1 assigned [ 1.837359] perf: AMD IBS detected (0x0000001f) [ 1.837531] Initialise module verification [ 1.837572] audit: initializing netlink socket (disabled) [ 1.837581] type=2000 audit(1377337662.556:1): initialized [ 1.855869] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.857251] VFS: Disk quotas dquot_6.5.2 [ 1.857280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.857671] fuse init (API version 7.20) [ 1.857722] msgmni has been set to 15963 [ 1.858134] Key type asymmetric registered [ 1.858137] Asymmetric key parser 'x509' registered [ 1.858180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.858208] io scheduler noop registered [ 1.858209] io scheduler deadline registered (default) [ 1.858213] io scheduler cfq registered [ 1.858331] pcieport 0000:00:02.0: irq 72 for MSI/MSI-X [ 1.858401] pcieport 0000:00:04.0: irq 73 for MSI/MSI-X [ 1.858458] pcieport 0000:00:05.0: irq 74 for MSI/MSI-X [ 1.858515] pcieport 0000:00:06.0: irq 75 for MSI/MSI-X [ 1.858580] pcieport 0000:00:07.0: irq 76 for MSI/MSI-X [ 1.858634] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.858636] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 1.858638] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt [ 1.858640] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.858649] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt [ 1.858650] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 1.858652] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt [ 1.858654] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded [ 1.858663] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 1.858664] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.858667] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 1.858675] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt [ 1.858676] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.858678] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded [ 1.858687] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 1.858688] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.858704] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 1.858711] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.858721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.858797] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.858800] ACPI: Power Button [PWRB] [ 1.858822] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.858824] ACPI: Power Button [PWRF] [ 1.859142] ACPI: acpi_idle registered with cpuidle [ 1.861752] GHES: HEST is not enabled! [ 1.861841] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.862840] Linux agpgart interface v0.103 [ 1.863710] brd: module loaded [ 1.864166] loop: module loaded [ 1.864377] libphy: Fixed MDIO Bus: probed [ 1.864413] tun: Universal TUN/TAP device driver, 1.6 [ 1.864414] tun: (C) 1999-2004 Max Krasnyansky [ 1.864459] PPP generic driver version 2.4.2 [ 1.864509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.864510] ehci-pci: EHCI PCI platform driver [ 1.864563] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.864568] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.864575] QUIRK: Enable AMD PLL fix [ 1.864577] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.864586] ehci-pci 0000:00:12.2: debug port 1 [ 1.864614] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcbfe400 [ 1.874547] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.874568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.874570] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.874571] usb usb1: Product: EHCI Host Controller [ 1.874573] usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd [ 1.874574] usb usb1: SerialNumber: 0000:00:12.2 [ 1.874664] hub 1-0:1.0: USB hub found [ 1.874667] hub 1-0:1.0: 5 ports detected [ 1.874772] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.874777] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.874780] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.874789] ehci-pci 0000:00:13.2: debug port 1 [ 1.874810] ehci-pci 0000:00:13.2: irq 17, io mem 0xfcbfe800 [ 1.886518] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.886539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.886540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.886542] usb usb2: Product: EHCI Host Controller [ 1.886543] usb usb2: Manufacturer: Linux 3.8.0-29-generic ehci_hcd [ 1.886544] usb usb2: SerialNumber: 0000:00:13.2 [ 1.886612] hub 2-0:1.0: USB hub found [ 1.886615] hub 2-0:1.0: 5 ports detected [ 1.886712] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.886716] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.886719] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.886728] ehci-pci 0000:00:16.2: debug port 1 [ 1.886747] ehci-pci 0000:00:16.2: irq 17, io mem 0xfcbfec00 [ 1.898482] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.898495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.898497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898498] usb usb3: Product: EHCI Host Controller [ 1.898500] usb usb3: Manufacturer: Linux 3.8.0-29-generic ehci_hcd [ 1.898501] usb usb3: SerialNumber: 0000:00:16.2 [ 1.898567] hub 3-0:1.0: USB hub found [ 1.898570] hub 3-0:1.0: 4 ports detected [ 1.898670] ehci-platform: EHCI generic platform driver [ 1.898681] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.898712] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.898716] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.898735] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfcbf7000 [ 1.958300] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.958302] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.958303] usb usb4: Product: OHCI Host Controller [ 1.958304] usb usb4: Manufacturer: Linux 3.8.0-29-generic ohci_hcd [ 1.958305] usb usb4: SerialNumber: 0000:00:12.0 [ 1.958387] hub 4-0:1.0: USB hub found [ 1.958392] hub 4-0:1.0: 5 ports detected [ 1.958486] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.958490] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.958502] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcbfc000 [ 2.018116] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.018119] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.018120] usb usb5: Product: OHCI Host Controller [ 2.018121] usb usb5: Manufacturer: Linux 3.8.0-29-generic ohci_hcd [ 2.018122] usb usb5: SerialNumber: 0000:00:13.0 [ 2.018203] hub 5-0:1.0: USB hub found [ 2.018207] hub 5-0:1.0: 5 ports detected [ 2.018303] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.018307] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.018319] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcbfd000 [ 2.077946] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.077948] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.077950] usb usb6: Product: OHCI Host Controller [ 2.077951] usb usb6: Manufacturer: Linux 3.8.0-29-generic ohci_hcd [ 2.077952] usb usb6: SerialNumber: 0000:00:14.5 [ 2.078034] hub 6-0:1.0: USB hub found [ 2.078038] hub 6-0:1.0: 2 ports detected [ 2.078118] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.078122] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.078134] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfcbff000 [ 2.137776] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.137778] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.137780] usb usb7: Product: OHCI Host Controller [ 2.137781] usb usb7: Manufacturer: Linux 3.8.0-29-generic ohci_hcd [ 2.137782] usb usb7: SerialNumber: 0000:00:16.0 [ 2.137872] hub 7-0:1.0: USB hub found [ 2.137877] hub 7-0:1.0: 4 ports detected [ 2.137954] uhci_hcd: USB Universal Host Controller Interface driver [ 2.137995] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.137999] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 2.138138] xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X [ 2.138143] xhci_hcd 0000:02:00.0: irq 78 for MSI/MSI-X [ 2.138148] xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X [ 2.138153] xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X [ 2.138157] xhci_hcd 0000:02:00.0: irq 81 for MSI/MSI-X [ 2.138161] xhci_hcd 0000:02:00.0: irq 82 for MSI/MSI-X [ 2.138166] xhci_hcd 0000:02:00.0: irq 83 for MSI/MSI-X [ 2.138237] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.138238] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.138240] usb usb8: Product: xHCI Host Controller [ 2.138241] usb usb8: Manufacturer: Linux 3.8.0-29-generic xhci_hcd [ 2.138242] usb usb8: SerialNumber: 0000:02:00.0 [ 2.138309] xHCI xhci_add_endpoint called for root hub [ 2.138310] xHCI xhci_check_bandwidth called for root hub [ 2.138321] hub 8-0:1.0: USB hub found [ 2.138324] hub 8-0:1.0: 2 ports detected [ 2.138363] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.138365] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2.141464] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.141466] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.141467] usb usb9: Product: xHCI Host Controller [ 2.141468] usb usb9: Manufacturer: Linux 3.8.0-29-generic xhci_hcd [ 2.141469] usb usb9: SerialNumber: 0000:02:00.0 [ 2.141557] xHCI xhci_add_endpoint called for root hub [ 2.141558] xHCI xhci_check_bandwidth called for root hub [ 2.141569] hub 9-0:1.0: USB hub found [ 2.141576] hub 9-0:1.0: 2 ports detected [ 2.141729] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.142097] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.142104] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.142210] mousedev: PS/2 mouse device common for all mice [ 2.142304] rtc_cmos 00:03: RTC can wake from S4 [ 2.142393] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.142412] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.142470] device-mapper: uevent: version 1.0.3 [ 2.142522] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 2.142566] cpuidle: using governor ladder [ 2.142650] cpuidle: using governor menu [ 2.142653] ledtrig-cpu: registered to indicate activity on CPUs [ 2.142654] EFI Variables Facility v0.08 2004-May-17 [ 2.142835] ashmem: initialized [ 2.142927] TCP: cubic registered [ 2.142990] NET: Registered protocol family 10 [ 2.143107] NET: Registered protocol family 17 [ 2.143116] Key type dns_resolver registered [ 2.143375] Loading module verification certificates [ 2.144165] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' [ 2.144172] registered taskstats version 1 [ 2.146455] Key type trusted registered [ 2.148019] Key type encrypted registered [ 2.149990] rtc_cmos 00:03: setting system clock to 2013-08-24 09:47:43 UTC (1377337663) [ 2.150032] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 2.150780] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.151203] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.151204] EDD information not available. [ 2.152236] Freeing unused kernel memory: 996k freed [ 2.152430] Write protecting the kernel read-only data: 12288k [ 2.155199] Freeing unused kernel memory: 1168k freed [ 2.157697] Freeing unused kernel memory: 1076k freed [ 2.168488] udevd[119]: starting version 175 [ 2.180273] Disabling lock debugging due to kernel taint [ 2.180847] ahci 0000:00:11.0: version 3.0 [ 2.180914] ahci 0000:00:11.0: irq 84 for MSI/MSI-X [ 2.181011] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.181014] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.181577] scsi0 : ahci [ 2.181725] scsi1 : ahci [ 2.181813] scsi2 : ahci [ 2.181864] scsi3 : ahci [ 2.181907] scsi4 : ahci [ 2.181955] scsi5 : ahci [ 2.181986] ata1: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe100 irq 84 [ 2.181988] ata2: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe180 irq 84 [ 2.181990] ata3: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe200 irq 84 [ 2.181992] ata4: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe280 irq 84 [ 2.181994] ata5: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe300 irq 84 [ 2.181996] ata6: SATA max UDMA/133 abar m1024@0xfcbfe000 port 0xfcbfe380 irq 84 [ 2.188609] sky2: driver version 1.30 [ 2.189089] sky2 0000:03:00.0: Yukon-2 Optima chip revision 1 [ 2.189159] sky2 0000:03:00.0: irq 85 for MSI/MSI-X [ 2.189370] sky2 0000:03:00.0 eth0: addr 20:cf:30:21:4b:17 [ 2.197599] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.197603] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.197848] scsi6 : ahci [ 2.197905] scsi7 : ahci [ 2.197961] ata7: SATA max UDMA/133 abar m8192@0xfcffe000 port 0xfcffe100 irq 44 [ 2.197964] ata8: SATA max UDMA/133 abar m8192@0xfcffe000 port 0xfcffe180 irq 44 [ 2.198810] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001) [ 2.198850] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 2.199309] scsi8 : pata_jmicron [ 2.199493] scsi9 : pata_jmicron [ 2.199597] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 45 [ 2.199599] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 45 [ 2.249518] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.500781] ata6: SATA link down (SStatus 0 SControl 300) [ 2.500860] ata3: SATA link down (SStatus 0 SControl 300) [ 2.516762] ata8: SATA link down (SStatus 0 SControl 300) [ 2.672276] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.672298] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.672321] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.672343] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.672461] ata2.00: ATA-8: OCZ-VECTOR, 2.0, max UDMA/133 [ 2.672464] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.672845] ata5.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133 [ 2.672847] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.672977] ata4.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 2.672979] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.673376] ata5.00: configured for UDMA/133 [ 2.673779] ata4.00: configured for UDMA/133 [ 2.675358] ata1.00: ATA-7: SAMSUNG SP2004C, VM100-41, max UDMA7 [ 2.675360] ata1.00: 390721968 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.677410] ata2.00: configured for UDMA/133 [ 2.688209] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.691237] ata7.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100 [ 2.691410] ata1.00: configured for UDMA/133 [ 2.691580] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2004C VM10 PQ: 0 ANSI: 5 [ 2.691720] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.691731] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 2.691860] sd 0:0:0:0: [sda] Write Protect is off [ 2.691865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.691894] scsi 1:0:0:0: Direct-Access ATA OCZ-VECTOR 2.0 PQ: 0 ANSI: 5 [ 2.692000] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.692002] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.692025] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.692046] sd 1:0:0:0: [sdb] Write Protect is off [ 2.692049] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.692061] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.692219] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 2.692359] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.692387] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.692420] sd 3:0:0:0: [sdc] Write Protect is off [ 2.692422] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.692452] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.692506] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5 [ 2.692619] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.692621] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 2.692638] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.692678] sd 4:0:0:0: [sdd] Write Protect is off [ 2.692680] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.692711] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.692721] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.693270] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.694959] ata7.00: configured for UDMA/100 [ 2.706557] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 [ 2.710606] sda: sda2 < sda5 > sda3 [ 2.711005] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.714928] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.714931] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.715036] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.715111] sr 6:0:0:0: Attached scsi generic sg4 type 5 [ 2.748045] firewire_core 0000:04:00.0: created device fw0: GUID 001e8c0000dc3724, S400 [ 2.751462] sdc: sdc1 sdc2 [ 2.751868] sd 3:0:0:0: [sdc] Attached SCSI disk [ 2.759615] sdd: sdd1 [ 2.759899] sd 4:0:0:0: [sdd] Attached SCSI disk [ 2.831764] tsc: Refined TSC clocksource calibration: 3210.784 MHz [ 2.831773] Switching to clocksource tsc [ 2.913533] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem [ 2.913535] EXT4-fs (sdb2): write access will be enabled during recovery [ 2.967345] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 3.099987] usb 2-3: New USB device found, idVendor=1058, idProduct=1003 [ 3.099990] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.099992] usb 2-3: Product: External HDD [ 3.099994] usb 2-3: Manufacturer: Western Digital [ 3.099995] usb 2-3: SerialNumber: 57442D574341553434343537363433 [ 3.102023] Initializing USB Mass Storage driver... [ 3.102123] scsi10 : usb-storage 2-3:1.0 [ 3.102166] usbcore: registered new interface driver usb-storage [ 3.102167] USB Mass Storage support registered. [ 3.107215] EXT4-fs (sdb2): orphan cleanup on readonly fs [ 3.107221] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 3553058 [ 3.107273] EXT4-fs (sdb2): 1 orphan inode deleted [ 3.107274] EXT4-fs (sdb2): recovery complete [ 3.136548] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 3.362186] usb 5-2: new full-speed USB device number 2 using ohci_hcd [ 3.534756] usb 5-2: New USB device found, idVendor=046d, idProduct=c049 [ 3.534759] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.534761] usb 5-2: Product: USB Gaming Mouse [ 3.534762] usb 5-2: Manufacturer: Logitech [ 3.928551] usb 4-1: new full-speed USB device number 2 using ohci_hcd [ 4.096715] scsi 10:0:0:0: Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4 [ 4.097139] sd 10:0:0:0: Attached scsi generic sg5 type 0 [ 4.098455] sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.099077] sd 10:0:0:0: [sde] Write Protect is off [ 4.099080] sd 10:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 4.099703] sd 10:0:0:0: [sde] No Caching mode page present [ 4.099706] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 4.102315] sd 10:0:0:0: [sde] No Caching mode page present [ 4.102318] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 4.111054] sde: sde1 [ 4.113283] sd 10:0:0:0: [sde] No Caching mode page present [ 4.113286] sd 10:0:0:0: [sde] Assuming drive cache: write through [ 4.113906] sd 10:0:0:0: [sde] Attached SCSI disk [ 4.120095] usb 4-1: New USB device found, idVendor=03f0, idProduct=1004 [ 4.120098] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.120100] usb 4-1: Product: DeskJet 970C [ 4.120101] usb 4-1: Manufacturer: Hewlett-Packard [ 4.120103] usb 4-1: SerialNumber: MY9CN120CHJQ [ 4.383229] usb 4-2: new full-speed USB device number 3 using ohci_hcd [ 4.547831] usb 4-2: New USB device found, idVendor=046d, idProduct=c223 [ 4.547835] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.547838] usb 4-2: Product: G15 Keyboard Hub [ 4.550224] hub 4-2:1.0: USB hub found [ 4.551818] hub 4-2:1.0: 4 ports detected [ 4.558456] Adding 3071996k swap on /dev/sdb3. Priority:-1 extents:1 across:3071996k SS [ 4.570452] Adding 131068k swap on /dev/sdc1. Priority:-2 extents:1 across:131068k [ 4.575870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.579770] udevd[445]: starting version 175 [ 4.590125] lp: driver loaded but no devices found [ 4.605763] wmi: Mapper loaded [ 4.609481] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,discard [ 4.613408] nvidia: module license 'NVIDIA' taints kernel. [ 4.625171] type=1400 audit(1377330465.976:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser" [ 4.625531] type=1400 audit(1377330465.976:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser" [ 4.625730] type=1400 audit(1377330465.976:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser" [ 4.626741] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 4.627387] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.44 Wed Mar 27 14:51:30 PDT 2013 [ 4.648758] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20121018/utaddress-251) [ 4.648766] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.650122] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 4.650192] sp5100_tco: PCI Revision ID: 0x41 [ 4.650225] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 4.650235] sp5100_tco: Last reboot was not triggered by watchdog. [ 4.650890] sp5100_tco: initialized (0xffffc90010e8cb00). heartbeat=60 sec (nowayout=0) [ 4.652200] ATK0110 ATK0110:00: EC enabled [ 4.673192] MCE: In-kernel MCE decoding enabled. [ 4.677823] EDAC MC: Ver: 3.0.0 [ 4.679901] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2 [ 4.679926] AMD64 EDAC driver v3.4.0 [ 4.680462] usbcore: registered new interface driver usbhid [ 4.680464] usbhid: USB HID core driver [ 4.680963] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 4.681063] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 4.681145] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 4.681194] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 4.681987] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 4.682063] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 4.682128] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 4.682890] hda_intel: Disabling MSI [ 4.682904] hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client [ 4.684629] microcode: CPU0: patch_level=0x010000bf [ 4.686576] microcode: CPU0: new patch_level=0x010000dc [ 4.686589] microcode: CPU1: patch_level=0x010000bf [ 4.686596] microcode: CPU1: new patch_level=0x010000dc [ 4.686661] EDAC amd64: DRAM ECC disabled. [ 4.686669] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 4.686669] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 4.686669] (Note that use of the override may cause unknown side effects.) [ 4.686720] microcode: CPU2: patch_level=0x010000bf [ 4.686727] microcode: CPU2: new patch_level=0x010000dc [ 4.686734] microcode: CPU3: patch_level=0x010000bf [ 4.686740] microcode: CPU3: new patch_level=0x010000dc [ 4.686744] microcode: CPU4: patch_level=0x010000bf [ 4.686748] microcode: CPU4: new patch_level=0x010000dc [ 4.686758] microcode: CPU5: patch_level=0x010000bf [ 4.686764] microcode: CPU5: new patch_level=0x010000dc [ 4.686800] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.703655] kvm: Nested Virtualization enabled [ 4.703659] kvm: Nested Paging enabled [ 4.707806] usblp 4-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004 [ 4.707829] usbcore: registered new interface driver usblp [ 4.752140] Bluetooth: Core ver 2.16 [ 4.752156] NET: Registered protocol family 31 [ 4.752157] Bluetooth: HCI device and connection manager initialized [ 4.752165] Bluetooth: HCI socket layer initialized [ 4.752166] Bluetooth: L2CAP socket layer initialized [ 4.752169] Bluetooth: SCO socket layer initialized [ 4.760504] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.760507] Bluetooth: BNEP filters: protocol multicast [ 4.760516] Bluetooth: BNEP socket layer initialized [ 4.766879] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input10 [ 4.767771] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 4.770325] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 4.782869] Bluetooth: RFCOMM TTY layer initialized [ 4.782884] Bluetooth: RFCOMM socket layer initialized [ 4.782885] Bluetooth: RFCOMM ver 1.11 [ 4.824556] init: avahi-cups-reload main process (878) terminated with status 1 [ 4.825048] ppdev: user-space parallel port driver [ 4.843008] usb 4-2.1: new low-speed USB device number 4 using ohci_hcd [ 4.847066] type=1400 audit(1377330466.200:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=944 comm="apparmor_parser" [ 4.847467] type=1400 audit(1377330466.200:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=944 comm="apparmor_parser" [ 4.861947] init: failsafe main process (907) killed by TERM signal [ 4.888954] type=1400 audit(1377330466.240:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1019 comm="apparmor_parser" [ 4.888975] type=1400 audit(1377330466.240:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1016 comm="apparmor_parser" [ 4.889249] type=1400 audit(1377330466.240:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1017 comm="apparmor_parser" [ 4.889257] type=1400 audit(1377330466.240:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1016 comm="apparmor_parser" [ 4.919335] sky2 0000:03:00.0 eth0: enabling interface [ 4.919388] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.919700] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.953653] usb 4-2.1: New USB device found, idVendor=046d, idProduct=c226 [ 4.953657] usb 4-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.953659] usb 4-2.1: Product: G15 Gaming Keyboard [ 4.961824] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2.1/4-2.1:1.0/input/input11 [ 4.962018] hid-generic 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:12.0-2.1/input0 [ 4.972648] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2.1/4-2.1:1.1/input/input12 [ 4.972806] hid-generic 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:12.0-2.1/input1 [ 5.046390] usb 4-2.4: new full-speed USB device number 5 using ohci_hcd [ 5.160063] usb 4-2.4: New USB device found, idVendor=046d, idProduct=c227 [ 5.160067] usb 4-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.160069] usb 4-2.4: Product: G15 GamePanel LCD [ 5.184082] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2.4/4-2.4:1.0/input/input13 [ 5.184214] hid-generic 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:12.0-2.4/input0 [ 5.484145] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input14 [ 5.484245] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input15 [ 5.484296] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input16 [ 5.484345] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input17 [ 5.524393] init: udev-fallback-graphics main process (1356) terminated with status 1 [ 5.584366] init: plymouth-splash main process (1438) terminated with status 2 [ 6.270378] NVRM: GPU at 0000:06:00: GPU-823baba9-cdea-6c5f-aef4-d255ab894d80 [ 6.635760] sky2 0000:03:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 6.635772] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1258.488122] EXT4-fs error (device sdb2): mb_free_blocks:1301: group 435, block 14272633:freeing already freed block (bit 18553) [ 1258.488142] Aborting journal on device sdb2-8. [ 1258.488700] EXT4-fs (sdb2): Remounting filesystem read-only [ 1258.489439] EXT4-fs error (device sdb2): mb_free_blocks:1301: group 435, block 14274285:freeing already freed block (bit 20205) [ 1258.489452] EXT4-fs error (device sdb2): mb_free_blocks:1301: group 435, block 14274286:freeing already freed block (bit 20206) [ 1258.489461] EXT4-fs error (device sdb2): mb_free_blocks:1301: group 435, block 14274287:freeing already freed block (bit 20207) [ 1258.489504] journal commit I/O error [ 1258.573310] init: anacron main process (1118) terminated with status 1 [11966.287760] show_signal_msg: 54 callbacks suppressed [11966.287765] firefox[3753]: segfault at 0 ip 00007f60fbbe6a6c sp 00007fffb57ea120 error 4 in libc-2.17.so[7f60fbb74000+1be000]