I get the following error when trying to make the drivers to install.  Is this a known bug, and if so is there a fix being worked for this.  My current system is a HP Precario DV6 model.  I don't have the exact model as the motherboard was recently replaced is is not of the same model.

sam@Sam-HPLaptop:~/Documents/rts_pstor$ sudo make
[sudo] password for sam: 
Sorry, try again.
[sudo] password for sam: 
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.release ./define.h
make -C /lib/modules/3.8.0-27-generic/build/ SUBDIRS= modules
make[1]: Entering directory `/usr/src/linux-headers-3.8.0-27-generic'
make[2]: *** No rule to make target `/usr/src/linux-headers-3.8.0-27-generic/arch/x86/syscalls/syscall_32.tbl', needed by `arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h'.  Stop.
make[1]: *** [archheaders] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-27-generic'
make: *** [default] Error 2
sam@Sam-HPLaptop:~/Documents/rts_pstor$ 

lspci:
sam@Sam-HPLaptop:~/Documents/rts_pstor$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6620G]
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices [AMD] FCH IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [Radeon HD 6600M/6700M/7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
04:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)

Kernel:
sam@Sam-HPLaptop:~/Documents/rts_pstor$ uname -r
3.8.0-27-generic

dmesg
[    2.331778] scsi 2:0:0:0: CD-ROM            hp       DVD A  DS8A8SH   KH61 PQ: 0 ANSI: 5
[    2.341930] tsc: Refined TSC clocksource calibration: 1597.094 MHz
[    2.341942] Switching to clocksource tsc
[    2.347533] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.347540] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.347903] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.348314] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.390967] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.390973] EXT4-fs (sda1): write access will be enabled during recovery
[    2.689952] usb 4-2: new full-speed USB device number 2 using ohci_hcd
[    2.793190] EXT4-fs (sda1): recovery complete
[    2.795450] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.854977] usb 4-2: New USB device found, idVendor=138a, idProduct=0018
[    2.854990] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.854997] usb 4-2: SerialNumber: 80be835a704a
[    2.965687] usb 7-1: new low-speed USB device number 2 using xhci_hcd
[    2.993124] Adding 7839740k swap on /dev/sda5.  Priority:-1 extents:1 across:7839740k SS
[    3.016657] usb 7-1: New USB device found, idVendor=03f0, idProduct=0024
[    3.016699] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.016706] usb 7-1: Product: HP Basic USB Keyboard
[    3.016709] usb 7-1: Manufacturer: CHICONY
[    3.016957] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.032829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.045595] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.052226] udevd[394]: starting version 175
[    3.101751] lp: driver loaded but no devices found
[    3.161711] mmc1: error -110 whilst initialising SD card
[    3.162516] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[    3.210003] hp_accel: laptop model unknown, using default axes configuration
[    3.334263] usb 3-2: New USB device found, idVendor=1bcf, idProduct=000c
[    3.334270] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.334274] usb 3-2: Product: USB Laser Wheel Mouse
[    3.358317] Bluetooth: Core ver 2.16
[    3.358372] NET: Registered protocol family 31
[    3.358375] Bluetooth: HCI device and connection manager initialized
[    3.358387] Bluetooth: HCI socket layer initialized
[    3.358391] Bluetooth: L2CAP socket layer initialized
[    3.358398] Bluetooth: SCO socket layer initialized
[    3.381192] ppdev: user-space parallel port driver
[    3.386321] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.386329] Bluetooth: BNEP filters: protocol multicast
[    3.386374] Bluetooth: BNEP socket layer initialized
[    3.404958] Bluetooth: RFCOMM TTY layer initialized
[    3.404977] Bluetooth: RFCOMM socket layer initialized
[    3.404980] Bluetooth: RFCOMM ver 1.11
[    3.405300] init: avahi-cups-reload main process (646) terminated with status 1
[    3.414220] [drm] Initialized drm 1.1.0 20060810
[    3.462834] type=1400 audit(1375674025.313:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=694 comm="apparmor_parser"
[    3.463545] type=1400 audit(1375674025.313:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
[    3.463931] type=1400 audit(1375674025.313:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
[    3.490731] type=1400 audit(1375674025.341:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=706 comm="apparmor_parser"
[    3.491541] type=1400 audit(1375674025.341:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
[    3.491585] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20121018/utaddress-251)
[    3.491597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.512493] snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
[    3.546161] Linux video capture interface: v2.00
[    3.551033] usbcore: registered new interface driver usbhid
[    3.551037] usbhid: USB HID core driver
[    3.553891] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[    3.554017] cfg80211: Calling CRDA to update world regulatory domain
[    3.560864] [drm] radeon defaulting to kernel modesetting.
[    3.560870] [drm] radeon kernel modesetting enabled.
[    3.586127] acpi device:01: registered as cooling_device4
[    3.586165] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.586262] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.589667] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    3.613711] microcode: CPU0: patch_level=0x03000027
[    3.617576] microcode: CPU1: patch_level=0x03000027
[    3.617595] microcode: CPU2: patch_level=0x03000027
[    3.617612] microcode: CPU3: patch_level=0x03000027
[    3.618307] microcode: Microcode Update Driver: v2.00 <email address hidden>, Peter Oruba
[    3.620402] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
[    3.637668] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[    3.637831] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[    3.639317] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8
[    3.646819] usbcore: registered new interface driver uvcvideo
[    3.646824] USB Video Class driver (1.1.1)
[    3.649837] [drm] initializing kernel modesetting (SUMO 0x1002:0x9641 0x103C:0x1860).
[    3.649906] [drm] register mmio base: 0xF0400000
[    3.649908] [drm] register mmio size: 262144
[    3.657002] ATOM BIOS: HP
[    3.657049] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    3.657054] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    3.658830] [drm] Detected VRAM RAM=512M, BAR=256M
[    3.658834] [drm] RAM width 32bits DDR
[    3.660823] [TTM] Zone  kernel: Available graphics memory: 3819850 kiB
[    3.660828] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.660831] [TTM] Initializing pool allocator
[    3.660839] [TTM] Initializing DMA pool allocator
[    3.660874] [drm] radeon: 512M of VRAM memory ready
[    3.660877] [drm] radeon: 512M of GTT memory ready.
[    3.660902] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.662608] [drm] Loading SUMO Microcode
[    3.684724] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    3.686020] radeon 0000:00:01.0: WB enabled
[    3.686026] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880201027c00
[    3.686031] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880201027c0c
[    3.686034] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.686036] [drm] Driver supports precise vblank timestamp query.
[    3.686079] radeon 0000:00:01.0: irq 55 for MSI/MSI-X
[    3.686096] radeon 0000:00:01.0: radeon: using MSI.
[    3.686129] [drm] radeon: irq initialized.
[    3.699385] kvm: Nested Virtualization enabled
[    3.699392] kvm: Nested Paging enabled
[    3.711357] [drm] ring test on 0 succeeded in 1 usecs
[    3.711422] [drm] ring test on 3 succeeded in 1 usecs
[    3.711894] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.711988] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.715568] acpi device:05: registered as cooling_device5
[    3.715605] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    3.715733] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input9
[    3.721340] [drm] radeon atom DIG backlight initialized
[    3.721346] [drm] Radeon Display Connectors
[    3.721348] [drm] Connector 0:
[    3.721351] [drm]   VGA-1
[    3.721352] [drm]   HPD2
[    3.721355] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    3.721357] [drm]   Encoders:
[    3.721358] [drm]     CRT1: INTERNAL_UNIPHY2
[    3.721360] [drm]     CRT1: NUTMEG
[    3.721362] [drm] Connector 1:
[    3.721364] [drm]   LVDS-1
[    3.721365] [drm]   HPD1
[    3.721367] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    3.721369] [drm]   Encoders:
[    3.721370] [drm]     LCD1: INTERNAL_UNIPHY2
[    3.721372] [drm]     LCD1: TRAVIS
[    3.721373] [drm] Connector 2:
[    3.721375] [drm]   HDMI-A-1
[    3.721376] [drm]   HPD4
[    3.721379] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    3.721380] [drm]   Encoders:
[    3.721382] [drm]     DFP1: INTERNAL_UNIPHY
[    3.749152] [drm] Internal thermal controller without fan control
[    3.749221] [drm] radeon: power management initialized
[    3.768381] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.843962] init: failsafe main process (817) killed by TERM signal
[    3.861747] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/input/input10
[    3.864276] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-1/input0
[    3.864649] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input11
[    3.865987] hid-generic 0003:1BCF:000C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:12.0-2/input0
[    3.885131] [drm] fb mappable at 0xD0142000
[    3.885135] [drm] vram apper at 0xD0000000
[    3.885137] [drm] size 4325376
[    3.885139] [drm] fb depth is 24
[    3.885141] [drm]    pitch is 5632
[    3.889228] fbcon: radeondrmfb (fb0) is primary device
[    3.897529] cfg80211: World regulatory domain updated:
[    3.897530] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.897534] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.897536] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.897537] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.897539] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.897540] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.971251] type=1400 audit(1375674025.821:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=966 comm="apparmor_parser"
[    3.971792] type=1400 audit(1375674025.821:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=966 comm="apparmor_parser"
[    3.975139] type=1400 audit(1375674025.825:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=971 comm="apparmor_parser"
[    3.976079] type=1400 audit(1375674025.825:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=967 comm="apparmor_parser"
[    4.021453] Console: switching to colour frame buffer device 170x48
[    4.027508] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    4.027511] radeon 0000:00:01.0: registered panic notifier
[    4.105902] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[    4.105998] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    4.106367] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x103C:0x1860).
[    4.106429] [drm] register mmio base: 0xF0300000
[    4.106431] [drm] register mmio size: 131072
[    4.106435] vga_switcheroo: enabled
[    4.106598] ATPX version 1
[    4.111533] r8169 0000:02:00.0 eth0: link down
[    4.111592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.112631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.165543] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.166125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.565388] mmc1: error -110 whilst initialising SD card
[    5.769925] ATOM BIOS: HP
[    5.769990] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    5.769992] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    5.770650] [drm] Detected VRAM RAM=1024M, BAR=256M
[    5.770656] [drm] RAM width 128bits DDR
[    5.770689] [drm] radeon: 1024M of VRAM memory ready
[    5.770691] [drm] radeon: 512M of GTT memory ready.
[    5.770716] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.771574] [drm] probing gen 2 caps for device 1022:1707 = 1/0
[    5.771650] [drm] Loading TURKS Microcode
[    5.776411] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    5.776559] radeon 0000:01:00.0: WB enabled
[    5.776563] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801f9410c00
[    5.776565] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801f9410c0c
[    5.776568] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.776569] [drm] Driver supports precise vblank timestamp query.
[    5.776619] radeon 0000:01:00.0: irq 56 for MSI/MSI-X
[    5.776635] radeon 0000:01:00.0: radeon: using MSI.
[    5.776689] [drm] radeon: irq initialized.
[    5.793423] [drm] ring test on 0 succeeded in 2 usecs
[    5.793492] [drm] ring test on 3 succeeded in 1 usecs
[    5.793899] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.793975] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.794253] [drm] Radeon Display Connectors
[    5.801397] [drm] Internal thermal controller with fan control
[    5.802674] [drm] radeon: power management initialized
[    5.802878] radeon 0000:01:00.0: No connectors reported connected with modes
[    5.802881] [drm] Cannot find any crtc or sizes - going 1024x768
[    5.805300] [drm] fb mappable at 0xE0142000
[    5.805301] [drm] vram apper at 0xE0000000
[    5.805302] [drm] size 3145728
[    5.805303] [drm] fb depth is 24
[    5.805304] [drm]    pitch is 4096
[    5.805529] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[    5.807283] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
[    5.845590] init: plymouth-splash main process (1299) terminated with status 1
[    5.931711] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    5.931718] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.957005] mmc1: error -110 whilst initialising SD card
[    6.952636] psmouse serio1: Failed to reset mouse on isa0060/serio1
[   22.528653] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[   22.928550] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   26.691742] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input12
[   26.891547] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   33.714682] wlan0: authenticate with 5c:0e:8b:1e:7d:b1
[   33.729961] wlan0: send auth to 5c:0e:8b:1e:7d:b1 (try 1/3)
[   33.731426] wlan0: authenticated
[   33.733872] wlan0: associate with 5c:0e:8b:1e:7d:b1 (try 1/3)
[   33.737496] wlan0: RX AssocResp from 5c:0e:8b:1e:7d:b1 (capab=0x8411 status=0 aid=1)
[   33.737561] wlan0: associated
[   33.737596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.737667] cfg80211: Calling CRDA for country: US
[   33.742698] cfg80211: Regulatory domain changed to country: US
[   33.742702] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.742705] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   33.742707] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   33.742709] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.742710] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.742712] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.742713] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   34.783260] wlan0: deauthenticated from 5c:0e:8b:1e:7d:b1 (Reason: 15)
[   34.793842] cfg80211: Calling CRDA to update world regulatory domain
[   34.798834] cfg80211: World regulatory domain updated:
[   34.798837] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.798840] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.798842] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.798844] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.798845] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.798847] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.810728] wlan0: authenticate with 00:23:68:74:a0:91
[   48.826235] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3)
[   48.827735] wlan0: authenticated
[   48.830161] wlan0: associate with 00:23:68:74:a0:91 (try 1/3)
[   48.834427] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1)
[   48.834489] wlan0: associated
[   48.834559] cfg80211: Calling CRDA for country: US
[   48.839507] cfg80211: Regulatory domain changed to country: US
[   48.839511] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   48.839514] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   48.839516] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   48.839518] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.839519] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.839521] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.839522] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  123.417674] init: udevtrigger post-stop process (501) terminated with status 1
[  167.027665] wlan0: authenticate with 00:23:68:78:13:01
[  167.035833] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
[  167.035934] cfg80211: Calling CRDA to update world regulatory domain
[  167.037372] wlan0: authenticated
[  167.043562] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
[  167.047458] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
[  167.047612] wlan0: associated
[  167.048787] cfg80211: World regulatory domain updated:
[  167.048794] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  167.048801] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.048807] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.048812] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.048817] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.048822] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.049016] cfg80211: Calling CRDA for country: US
[  167.058593] cfg80211: Regulatory domain changed to country: US
[  167.058602] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  167.058609] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  167.058615] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  167.058620] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.058625] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.058629] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.058634] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  184.851462] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC__.EGRW] (Node ffff880203e6b410), AE_AML_INFINITE_LOOP (20121018/psparse-537)
[  184.851492] ACPI Error: Method parse/execution failed [\_SB_.ACEL.ALRD] (Node ffff880203e6eed8), AE_AML_INFINITE_LOOP (20121018/psparse-537)
[  184.851517] lis3lv02d: unknown sensor type 0x0
[  184.851536] hp_accel: probe of HPQ0004:00 failed with error -22
[  184.852153] wmi: Mapper loaded
[  184.869677] input: HP WMI hotkeys as /devices/virtual/input/input13
[  713.347587] wlan0: authenticate with 00:23:68:74:a0:91
[  713.355614] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3)
[  713.355721] cfg80211: Calling CRDA to update world regulatory domain
[  713.357159] wlan0: authenticated
[  713.359425] wlan0: associate with 00:23:68:74:a0:91 (try 1/3)
[  713.365278] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1)
[  713.365339] wlan0: associated
[  713.365543] cfg80211: World regulatory domain updated:
[  713.365547] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  713.365549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.365552] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  713.365554] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  713.365555] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.365557] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.365567] cfg80211: Calling CRDA for country: US
[  713.374052] cfg80211: Regulatory domain changed to country: US
[  713.374061] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  713.374069] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  713.374075] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  713.374080] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.374085] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.374089] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  713.374094] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2872.801298] wlan0: authenticate with 00:23:68:78:13:01
[ 2872.809432] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
[ 2872.809531] cfg80211: Calling CRDA to update world regulatory domain
[ 2872.811516] wlan0: authenticated
[ 2872.813225] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
[ 2872.816050] cfg80211: World regulatory domain updated:
[ 2872.816056] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2872.816059] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.816063] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2872.816066] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2872.816068] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.816070] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.816997] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
[ 2872.817096] wlan0: associated
[ 2872.817213] cfg80211: Calling CRDA for country: US
[ 2872.824714] cfg80211: Regulatory domain changed to country: US
[ 2872.824719] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2872.824723] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2872.824727] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2872.824729] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.824732] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.824734] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2872.824736] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 4911.643214] show_signal_msg: 54 callbacks suppressed
[ 4911.643228] pool[6161]: segfault at 0 ip 00007fb1da4e2ed7 sp 00007fb1d520b808 error 6 in libdbus-1.so.3.7.2[7fb1da4bc000+43000]
[ 6046.633384] wlan0: deauthenticating from 00:23:68:78:13:01 by local choice (reason=3)
[ 6046.679581] cfg80211: Calling CRDA to update world regulatory domain
[ 6046.692551] cfg80211: World regulatory domain updated:
[ 6046.692560] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6046.692568] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6046.692574] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6046.692580] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6046.692584] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6046.692589] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6047.816171] wlan0: authenticate with 00:23:68:78:13:01
[ 6047.830829] wlan0: send auth to 00:23:68:78:13:01 (try 1/3)
[ 6047.832335] wlan0: authenticated
[ 6047.834577] wlan0: associate with 00:23:68:78:13:01 (try 1/3)
[ 6047.838103] wlan0: RX AssocResp from 00:23:68:78:13:01 (capab=0x8411 status=0 aid=1)
[ 6047.838183] wlan0: associated
[ 6047.838297] cfg80211: Calling CRDA for country: US
[ 6047.848947] cfg80211: Regulatory domain changed to country: US
[ 6047.848956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6047.848964] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6047.848971] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6047.848976] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6047.848981] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6047.848985] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6047.848990] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[24517.813974] systemd-hostnamed[14840]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!