2013-05-09 07:48:59 |
StefanF |
bug |
|
|
added bug |
2013-05-09 08:00:14 |
Brad Figg |
linux (Ubuntu): status |
New |
Confirmed |
|
2013-05-09 09:23:04 |
penalvch |
description |
The SD card slot does not work until I remove and reload the tg3 module.
I tested this with Ubuntu 12.04 32bit and 13.04 32bit. Both are affected in the same way.
Steps to reproduce:
1) Insert an SD card
2) dmesg says repeatedly: mmc0: Timeout waiting for hardware interrupt
3) rmmod tg3 -> nothing happens with the SD card
4) modprobe tg3 -> Gnome provides to open the media in file manager, which works fine now.
5) rmmod tg3 ->Cardreader is still functional
The type of SD card does not matter and it does not matter if an ethernet cable is plugged.
dmesg output:
insert card:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
The type of SD card does not matter and it does not matter if an ethernet cable is plugged. I tested this with Ubuntu 12.04 32bit and 13.04 32bit. Both are affected in the same way.
WORKAROUND: Perform at a terminal:
rmmod tg3
modprobe tg3
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
|
2013-05-09 09:26:16 |
penalvch |
tags |
apport-bug i386 precise staging |
apport-bug bios-outdated-1.09 i386 kernel-media needs-upstream-testing precise raring staging |
|
2013-05-09 09:27:04 |
penalvch |
summary |
SD card slot not working on Acer Aspire One 756 |
14e4:16bc SD card slot not working on Acer Aspire One 756 |
|
2013-05-09 09:35:06 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
2013-05-09 11:20:14 |
Vasiliy Tolstov |
bug |
|
|
added subscriber Vasiliy Tolstov |
2013-05-09 19:13:17 |
Joseph Salisbury |
linux (Ubuntu): importance |
Undecided |
Medium |
|
2013-05-14 17:03:07 |
StefanF |
tags |
apport-bug bios-outdated-1.09 i386 kernel-media needs-upstream-testing precise raring staging |
apport-bug bios-outdated-1.09 i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-3.10.0 kernel-media precise raring staging |
|
2013-05-14 17:03:42 |
StefanF |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
2013-05-14 17:06:39 |
StefanF |
tags |
apport-bug bios-outdated-1.09 i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-3.10.0 kernel-media precise raring staging |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-3.10.0 kernel-media precise raring staging |
|
2013-05-15 02:12:43 |
penalvch |
tags |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-3.10.0 kernel-media precise raring staging |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media precise raring staging |
|
2013-05-15 02:13:22 |
penalvch |
tags |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media precise raring staging |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 precise raring staging |
|
2013-05-15 02:14:16 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
2013-05-16 09:49:09 |
penalvch |
description |
My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
The type of SD card does not matter and it does not matter if an ethernet cable is plugged. I tested this with Ubuntu 12.04 32bit and 13.04 32bit. Both are affected in the same way.
WORKAROUND: Perform at a terminal:
rmmod tg3
modprobe tg3
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
The type of SD card does not matter and it does not matter if an ethernet cable is plugged.
With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning.
10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init.
12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur.
13.04 32-bit: same as above with 12.04.
12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04.
WORKAROUND: Perform at a terminal:
rmmod tg3
modprobe tg3
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
|
2013-05-26 13:00:35 |
penalvch |
tags |
apport-bug i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 precise raring staging |
apport-bug bisect-done i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 precise raring staging |
|
2013-05-26 13:04:45 |
penalvch |
description |
My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
The type of SD card does not matter and it does not matter if an ethernet cable is plugged.
With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning.
10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init.
12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur.
13.04 32-bit: same as above with 12.04.
12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04.
WORKAROUND: Perform at a terminal:
rmmod tg3
modprobe tg3
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
The type of SD card does not matter and it does not matter if an ethernet cable is plugged.
With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning.
10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init.
12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur.
13.04 32-bit: same as above with 12.04.
12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04.
WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40
WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41
WORKAROUND: Perform at a terminal:
rmmod tg3
modprobe tg3
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer |
|
2013-05-26 13:05:06 |
penalvch |
tags |
apport-bug bisect-done i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 precise raring staging |
apport-bug bisect-done i386 kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 needs-upstream-testing precise raring staging |
|
2013-05-27 10:02:40 |
penalvch |
tags |
apport-bug bisect-done i386 kernel-bug-exists-upstream-v3.10-rc1 kernel-media latest-bios-v1.09 needs-upstream-testing precise raring staging |
apport-bug bisect-done i386 kernel-bug-exists-upstream-v3.10-rc2 kernel-media latest-bios-v1.09 needs-upstream-testing precise raring staging |
|
2013-05-27 19:36:36 |
penalvch |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
2013-05-30 20:45:16 |
StefanF |
attachment added |
|
output of lspci -xxx https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3690806/+files/lspci_xxx.txt |
|
2013-05-30 20:46:42 |
StefanF |
attachment added |
|
dmesg from boot with ASPM diabled https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3690808/+files/dmesg |
|
2013-06-03 18:54:12 |
StefanF |
attachment added |
|
windows7-64bit-screenshot.png https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3693826/+files/windows7-64bit-screenshot.png |
|
2013-06-04 19:01:03 |
StefanF |
attachment added |
|
Screenshot of config space of the card reader https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3694634/+files/windows7-64bit-screenshot2.png |
|
2013-06-04 19:02:09 |
StefanF |
attachment added |
|
Config space of PCIe bus and card reader under Linux 3.10 (where it does not work). https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3694635/+files/lspci_linux_3.10.txt |
|
2013-06-05 17:56:07 |
Bjorn Helgaas |
bug |
|
|
added subscriber Bjorn Helgaas |
2013-06-06 18:17:28 |
StefanF |
attachment added |
|
windows7-64bit-screenshot3.png https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3696573/+files/windows7-64bit-screenshot3.png |
|
2013-06-06 18:47:51 |
StefanF |
attachment added |
|
lspci_04:00.0_linux_3.10_32bit.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3696601/+files/lspci_04%3A00.0_linux_3.10_32bit.txt |
|
2013-06-06 18:51:54 |
StefanF |
attachment added |
|
k57nd60a.inf https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3696603/+files/k57nd60a.inf |
|
2013-06-06 19:28:49 |
StefanF |
attachment added |
|
b57nd60a.inf https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3696626/+files/b57nd60a.inf |
|
2013-06-06 19:29:38 |
StefanF |
attachment added |
|
bScsiSDa.inf https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3696627/+files/bScsiSDa.inf |
|
2013-08-18 17:02:54 |
Jan Rudolph |
bug |
|
|
added subscriber Jan Rudolph |
2013-08-27 09:46:33 |
Martin Endres |
bug |
|
|
added subscriber Martin Endres |
2013-09-10 23:17:40 |
Bjorn Helgaas |
bug watch added |
|
http://bugzilla.kernel.org/show_bug.cgi?id=59311 |
|
2013-12-22 16:03:50 |
penalvch |
linux (Ubuntu): importance |
Medium |
Low |
|
2013-12-22 16:03:50 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Triaged |
|
2013-12-22 16:04:49 |
penalvch |
bug task added |
|
linux |
|
2013-12-22 16:05:25 |
penalvch |
summary |
14e4:16bc SD card slot not working on Acer Aspire One 756 |
14e4:16bc [Acer Aspire One 756] SD card slot doesn't work |
|
2013-12-24 07:31:31 |
StefanF |
attachment added |
|
acpidump.txt.gz https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935031/+files/acpidump.txt.gz |
|
2013-12-24 07:31:49 |
StefanF |
attachment added |
|
dmesg.txt.gz https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935032/+files/dmesg.txt.gz |
|
2013-12-24 07:32:04 |
StefanF |
attachment added |
|
lspci_vv.txt.gz https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935033/+files/lspci_vv.txt.gz |
|