[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic root=/dev/mapper/jupiter-root ro quiet splash ipv6.disable=1 clocksource=acpi_pm [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee1000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F8a 05/16/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x320000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask FE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] reg 4, base: 12GB, range: 512MB, type WB [ 0.000000] total RAM covered: 15872M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] mapped at [ffff8800000f5ed0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdfedffff] [ 0.000000] [mem 0x00000000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfedffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdfedffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x31fffffff] [ 0.000000] [mem 0x100000000-0x31fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x31fffffff @ [mem 0xdfed6000-0xdfedffff] [ 0.000000] RAMDISK: [mem 0x34216000-0x36102fff] [ 0.000000] ACPI: RSDP 00000000000f7630 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee1180 05975 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee6cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee6d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000dfee6d80 004D0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000dfee7250 00CB2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000dfee6b40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfee7f40 0352C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31fffffff] [ 0.000000] NODE_DATA [mem 0x31fffb000-0x31fffffff] [ 0.000000] [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880313600000-ffff88031f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x31fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdfedffff] [ 0.000000] node 0: [mem 0x100000000-0x31fffffff] [ 0.000000] On node 0 totalpages: 3145325 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14268 pages used for memmap [ 0.000000] DMA32 zone: 898852 pages, LIFO batch:31 [ 0.000000] Normal zone: 34816 pages used for memmap [ 0.000000] Normal zone: 2193408 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000 [ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031fc00000 s85056 r8192 d21440 u131072 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096171 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic root=/dev/mapper/jupiter-root ro quiet splash ipv6.disable=1 clocksource=acpi_pm [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12269312k/13107200k available (7006k kernel code, 525900k absent, 311988k reserved, 6238k data, 992k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16. [ 0.000000] NR_IRQS:16640 nr_irqs:808 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2664.810 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5329.62 BogoMIPS (lpj=10659240) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000038] AppArmor: AppArmor initialized [ 0.000039] Yama: becoming mindful. [ 0.000972] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003787] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004969] Mount-cache hash table entries: 256 [ 0.005123] Initializing cgroup subsys cpuacct [ 0.005125] Initializing cgroup subsys memory [ 0.005131] Initializing cgroup subsys devices [ 0.005132] Initializing cgroup subsys freezer [ 0.005133] Initializing cgroup subsys blkio [ 0.005135] Initializing cgroup subsys perf_event [ 0.005137] Initializing cgroup subsys hugetlb [ 0.005156] CPU: Physical Processor ID: 0 [ 0.005157] CPU: Processor Core ID: 0 [ 0.005160] mce: CPU supports 9 MCE banks [ 0.005169] CPU0: Thermal monitoring enabled (TM1) [ 0.005174] process: using mwait in idle threads [ 0.005177] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.005177] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.005177] tlb_flushall_shift: 6 [ 0.005291] Freeing SMP alternatives: 24k freed [ 0.007077] ACPI: Core revision 20121018 [ 0.013047] ftrace: allocating 26690 entries in 105 pages [ 0.024228] Switched APIC routing to physical flat. [ 0.024603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064259] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05) [ 0.170180] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.170185] perf_event_intel: CPU erratum AAJ80 worked around [ 0.170186] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.170187] ... version: 3 [ 0.170188] ... bit width: 48 [ 0.170189] ... generic registers: 4 [ 0.170190] ... value mask: 0000ffffffffffff [ 0.170191] ... max period: 000000007fffffff [ 0.170191] ... fixed-purpose events: 3 [ 0.170192] ... event mask: 000000070000000f [ 0.184296] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.171046] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 [ 0.263478] Brought up 8 CPUs [ 0.263481] smpboot: Total of 8 processors activated (42636.96 BogoMIPS) [ 0.268554] devtmpfs: initialized [ 0.269807] EVM: security.selinux [ 0.269809] EVM: security.SMACK64 [ 0.269810] EVM: security.capability [ 0.269849] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee0fff] (4096 bytes) [ 0.270611] regulator-dummy: no parameters [ 0.270652] NET: Registered protocol family 16 [ 0.270780] ACPI: bus type pci registered [ 0.270827] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.270829] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.274475] PCI: Using configuration type 1 for base access [ 0.275299] bio: create slab at 0 [ 0.275370] ACPI: Added _OSI(Module Device) [ 0.275372] ACPI: Added _OSI(Processor Device) [ 0.275373] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.275374] ACPI: Added _OSI(Processor Aggregator Device) [ 0.276065] ACPI: EC: Look up EC in DSDT [ 0.279175] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0x8A, should be 0x89 (20121018/tbutils-324) [ 0.279947] ACPI: Interpreter enabled [ 0.279951] ACPI: (supports S0 S3 S4 S5) [ 0.279961] ACPI: Using IOAPIC for interrupt routing [ 0.282760] ACPI: No dock devices found. [ 0.282764] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.282798] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.282800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.282977] PCI host bridge to bus 0000:00 [ 0.282980] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.282982] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.282984] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.282986] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.282987] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.282989] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff] [ 0.283000] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.283051] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.283074] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.283126] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.283147] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.283198] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.283218] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.283270] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.283296] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 0.283355] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 0.283408] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 0.283467] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 0.283520] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 0.283530] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff] [ 0.283575] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.283592] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.283654] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.283714] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.283775] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 0.283831] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.283871] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.283918] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.283957] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.284003] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.284042] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.284097] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.284117] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 0.284200] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.284225] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.284239] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 0.284301] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.284320] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.284384] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.284407] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.284470] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.284495] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.284533] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.284581] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.284619] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.284666] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.284706] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.284762] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.284781] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 0.284864] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.284884] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.284942] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.285017] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.285020] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.285066] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.285083] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 0.285090] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 0.285097] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 0.285104] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 0.285111] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 0.285118] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 0.285161] pci 0000:00:1f.2: PME# supported from D3hot [ 0.285177] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.285190] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 0.285209] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.285274] pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601 [ 0.285283] pci 0000:01:00.0: reg 10: [io 0xdf00-0xdf07] [ 0.285290] pci 0000:01:00.0: reg 14: [io 0xde00-0xde03] [ 0.285297] pci 0000:01:00.0: reg 18: [io 0xdd00-0xdd07] [ 0.285304] pci 0000:01:00.0: reg 1c: [io 0xdc00-0xdc03] [ 0.285311] pci 0000:01:00.0: reg 20: [io 0xdb00-0xdb0f] [ 0.285318] pci 0000:01:00.0: reg 24: [mem 0xfbcff000-0xfbcff7ff] [ 0.285325] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.285355] pci 0000:01:00.0: PME# supported from D3hot [ 0.290099] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.290102] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.290105] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.290154] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.290169] pci 0000:02:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit] [ 0.290245] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.298093] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.298097] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.298142] pci 0000:03:00.0: [10de:0dc4] type 00 class 0x030000 [ 0.298151] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.298160] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.298170] pci 0000:03:00.0: reg 1c: [mem 0xec000000-0xedffffff 64bit pref] [ 0.298177] pci 0000:03:00.0: reg 24: [io 0xef00-0xef7f] [ 0.298183] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.298236] pci 0000:03:00.1: [10de:0be9] type 00 class 0x040300 [ 0.298245] pci 0000:03:00.1: reg 10: [mem 0xf9ffc000-0xf9ffffff] [ 0.306088] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.306091] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.306094] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.306098] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.306134] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.306193] pci 0000:05:00.0: [197b:2363] type 00 class 0x010601 [ 0.306277] pci 0000:05:00.0: reg 24: [mem 0xfbbfe000-0xfbbfffff] [ 0.306290] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.306340] pci 0000:05:00.0: PME# supported from D3hot [ 0.306372] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 0.306395] pci 0000:05:00.1: reg 10: [io 0xcf00-0xcf07] [ 0.306407] pci 0000:05:00.1: reg 14: [io 0xce00-0xce03] [ 0.306420] pci 0000:05:00.1: reg 18: [io 0xcd00-0xcd07] [ 0.306433] pci 0000:05:00.1: reg 1c: [io 0xcc00-0xcc03] [ 0.306446] pci 0000:05:00.1: reg 20: [io 0xcb00-0xcb0f] [ 0.306526] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.306535] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.306538] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.306541] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.306572] pci 0000:06:00.0: [1814:0601] type 00 class 0x028000 [ 0.306588] pci 0000:06:00.0: reg 10: [mem 0xfbdf0000-0xfbdfffff] [ 0.306698] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.306703] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.306708] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.306710] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.306711] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.306713] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.306715] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.306740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.306767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.306797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.306849] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.306851] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.307925] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.307958] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.307989] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.308019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.308051] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.308083] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.308113] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.308144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.308218] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.308220] vgaarb: loaded [ 0.308221] vgaarb: bridge control possible 0000:03:00.0 [ 0.308347] SCSI subsystem initialized [ 0.308349] ACPI: bus type scsi registered [ 0.308370] libata version 3.00 loaded. [ 0.308383] ACPI: bus type usb registered [ 0.308396] usbcore: registered new interface driver usbfs [ 0.308405] usbcore: registered new interface driver hub [ 0.308417] usbcore: registered new device driver usb [ 0.308476] PCI: Using ACPI for IRQ routing [ 0.309767] PCI: Discovered peer bus 3f [ 0.309768] PCI: root bus 3f: using default resources [ 0.309769] PCI: Probing PCI hardware (bus 3f) [ 0.309785] PCI host bridge to bus 0000:3f [ 0.309788] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.309789] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.309791] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.309793] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.309798] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000 [ 0.309814] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000 [ 0.309831] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000 [ 0.309846] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000 [ 0.309864] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000 [ 0.309878] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000 [ 0.309893] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.309909] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000 [ 0.309923] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000 [ 0.309938] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000 [ 0.309953] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000 [ 0.309969] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000 [ 0.309984] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000 [ 0.309999] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.310014] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.310030] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000 [ 0.310044] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000 [ 0.310059] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000 [ 0.310077] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000 [ 0.310101] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.310324] PCI: pci_cache_line_size set to 64 bytes [ 0.310416] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.310417] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.310482] NetLabel: Initializing [ 0.310483] NetLabel: domain hash size = 128 [ 0.310484] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.310491] NetLabel: unlabeled traffic allowed by default [ 0.310530] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.310534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.310537] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.312704] Switching to clocksource hpet [ 0.316625] AppArmor: AppArmor Filesystem Enabled [ 0.316639] pnp: PnP ACPI init [ 0.316649] ACPI: bus type pnp registered [ 0.316775] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.316777] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.316779] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.316781] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.316782] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.316785] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316794] pnp 00:01: [dma 4] [ 0.316807] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.316860] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.316890] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.316908] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.316928] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.317041] system 00:06: [io 0x0400-0x04cf] has been reserved [ 0.317043] system 00:06: [io 0x04d2-0x04ff] has been reserved [ 0.317046] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317196] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.317199] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317346] system 00:08: [mem 0x000d2a00-0x000d3fff] has been reserved [ 0.317349] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.317350] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.317352] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.317354] system 00:08: [mem 0xdfee0000-0xdfeeffff] could not be reserved [ 0.317356] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.317358] system 00:08: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.317360] system 00:08: [mem 0xdfef0000-0xdfefffff] has been reserved [ 0.317361] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.317363] system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.317365] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.317367] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.317369] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.317370] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.317372] system 00:08: [mem 0x000e0000-0x000effff] has been reserved [ 0.317374] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.317402] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.317406] pnp: PnP ACPI: found 10 devices [ 0.317407] ACPI: ACPI bus type pnp unregistered [ 0.323119] Switching to clocksource acpi_pm [ 0.323176] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.323179] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.323181] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 [ 0.323188] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000 [ 0.323205] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.323207] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.323209] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.323210] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.323214] pci 0000:00:01.0: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref] [ 0.323216] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff] [ 0.323218] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.323220] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4400000-0xf46fffff pref] [ 0.323223] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.323225] pci 0000:01:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref] [ 0.323227] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.323230] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.323233] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.323236] pci 0000:00:01.0: bridge window [mem 0xdff00000-0xdfffffff pref] [ 0.323241] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.323244] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.323250] pci 0000:03:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref] [ 0.323252] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.323254] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.323258] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.323261] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.323265] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.323267] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.323271] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff] [ 0.323274] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.323280] pci 0000:05:00.0: BAR 6: assigned [mem 0xf4400000-0xf440ffff pref] [ 0.323281] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.323284] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.323288] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.323291] pci 0000:00:1c.3: bridge window [mem 0xf4400000-0xf46fffff pref] [ 0.323295] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.323299] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.323322] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.323336] pci 0000:00:1e.0: setting latency timer to 64 [ 0.323339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.323341] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.323343] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.323344] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.323346] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.323348] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.323349] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.323351] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff pref] [ 0.323352] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.323354] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.323355] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff] [ 0.323357] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.323359] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.323360] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf41fffff] [ 0.323362] pci_bus 0000:04: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.323363] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.323365] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.323367] pci_bus 0000:05: resource 2 [mem 0xf4400000-0xf46fffff pref] [ 0.323368] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.323370] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 0.323371] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 0.323373] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 0.323374] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff] [ 0.323376] pci_bus 0000:06: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.323378] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.323379] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.323408] NET: Registered protocol family 2 [ 0.323601] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.323893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.324011] TCP: Hash tables configured (established 131072 bind 65536) [ 0.324029] TCP: reno registered [ 0.324044] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.324092] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.324179] NET: Registered protocol family 1 [ 0.356749] pci 0000:03:00.0: Boot video device [ 0.356782] PCI: CLS 64 bytes, default 64 [ 0.356809] Trying to unpack rootfs image as initramfs... [ 0.799955] Freeing initrd memory: 31668k freed [ 0.803773] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.803778] software IO TLB [mem 0xdbed6000-0xdfed6000] (64MB) mapped at [ffff8800dbed6000-ffff8800dfed5fff] [ 0.804184] Initialise module verification [ 0.804220] audit: initializing netlink socket (disabled) [ 0.804228] type=2000 audit(1367831451.694:1): initialized [ 0.828822] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.830045] VFS: Disk quotas dquot_6.5.2 [ 0.830080] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.830439] fuse init (API version 7.20) [ 0.830496] msgmni has been set to 24025 [ 0.830837] Key type asymmetric registered [ 0.830839] Asymmetric key parser 'x509' registered [ 0.830862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.830885] io scheduler noop registered [ 0.830886] io scheduler deadline registered (default) [ 0.830890] io scheduler cfq registered [ 0.831094] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.831170] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X [ 0.831225] ioapic: probe of 0000:00:13.0 failed with error -22 [ 0.831228] ioapic: probe of 0000:00:15.0 failed with error -22 [ 0.831235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.831244] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.831279] intel_idle: MWAIT substates: 0x1120 [ 0.831289] intel_idle: v0.4 model 0x1A [ 0.831291] intel_idle: lapic_timer_reliable_states 0x2 [ 0.831372] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.831375] ACPI: Power Button [PWRB] [ 0.831404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.831406] ACPI: Power Button [PWRF] [ 0.831453] ACPI: Requesting acpi_cpufreq [ 0.834328] GHES: HEST is not enabled! [ 0.834387] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.835484] Linux agpgart interface v0.103 [ 0.836546] brd: module loaded [ 0.837074] loop: module loaded [ 0.837317] libphy: Fixed MDIO Bus: probed [ 0.837358] tun: Universal TUN/TAP device driver, 1.6 [ 0.837359] tun: (C) 1999-2004 Max Krasnyansky [ 0.837390] PPP generic driver version 2.4.2 [ 0.837420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.837421] ehci-pci: EHCI PCI platform driver [ 0.837454] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 0.837458] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.837462] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.837473] ehci-pci 0000:00:1a.7: debug port 1 [ 0.841355] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.841368] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.852347] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.852375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.852377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.852379] usb usb1: Product: EHCI Host Controller [ 0.852380] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd [ 0.852382] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.852445] hub 1-0:1.0: USB hub found [ 0.852449] hub 1-0:1.0: 6 ports detected [ 0.852533] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.852536] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.852540] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.852550] ehci-pci 0000:00:1d.7: debug port 1 [ 0.856451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.856464] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.868337] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.868347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.868348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868350] usb usb2: Product: EHCI Host Controller [ 0.868351] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd [ 0.868353] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.868410] hub 2-0:1.0: USB hub found [ 0.868413] hub 2-0:1.0: 6 ports detected [ 0.868485] ehci-platform: EHCI generic platform driver [ 0.868490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.868501] uhci_hcd: USB Universal Host Controller Interface driver [ 0.868514] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.868516] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.868521] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.868549] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.868570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.868572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868573] usb usb3: Product: UHCI Host Controller [ 0.868575] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.868576] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.868631] hub 3-0:1.0: USB hub found [ 0.868634] hub 3-0:1.0: 2 ports detected [ 0.868684] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.868687] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.868690] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.868717] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.868740] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.868741] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868743] usb usb4: Product: UHCI Host Controller [ 0.868745] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.868746] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.868803] hub 4-0:1.0: USB hub found [ 0.868806] hub 4-0:1.0: 2 ports detected [ 0.868855] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.868858] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.868861] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.868881] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.868901] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.868903] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868905] usb usb5: Product: UHCI Host Controller [ 0.868906] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.868908] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.868962] hub 5-0:1.0: USB hub found [ 0.868965] hub 5-0:1.0: 2 ports detected [ 0.869019] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.869022] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.869025] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.869045] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.869067] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869069] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869070] usb usb6: Product: UHCI Host Controller [ 0.869072] usb usb6: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.869073] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.869129] hub 6-0:1.0: USB hub found [ 0.869132] hub 6-0:1.0: 2 ports detected [ 0.869182] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.869184] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.869188] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.869215] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.869235] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869237] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869238] usb usb7: Product: UHCI Host Controller [ 0.869240] usb usb7: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.869241] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.869293] hub 7-0:1.0: USB hub found [ 0.869296] hub 7-0:1.0: 2 ports detected [ 0.869347] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.869350] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.869353] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.869373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.869393] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869395] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869397] usb usb8: Product: UHCI Host Controller [ 0.869398] usb usb8: Manufacturer: Linux 3.8.0-19-generic uhci_hcd [ 0.869400] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.869452] hub 8-0:1.0: USB hub found [ 0.869454] hub 8-0:1.0: 2 ports detected [ 0.869521] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.869525] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 0.869665] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X [ 0.869671] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 0.869676] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 0.869681] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.869689] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 0.869694] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 0.869699] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 0.869704] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 0.869790] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.869792] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869793] usb usb9: Product: xHCI Host Controller [ 0.869795] usb usb9: Manufacturer: Linux 3.8.0-19-generic xhci_hcd [ 0.869796] usb usb9: SerialNumber: 0000:02:00.0 [ 0.869838] xHCI xhci_add_endpoint called for root hub [ 0.869840] xHCI xhci_check_bandwidth called for root hub [ 0.869854] hub 9-0:1.0: USB hub found [ 0.869859] hub 9-0:1.0: 2 ports detected [ 0.869901] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.869904] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 0.873002] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.873003] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873005] usb usb10: Product: xHCI Host Controller [ 0.873006] usb usb10: Manufacturer: Linux 3.8.0-19-generic xhci_hcd [ 0.873008] usb usb10: SerialNumber: 0000:02:00.0 [ 0.873059] xHCI xhci_add_endpoint called for root hub [ 0.873060] xHCI xhci_check_bandwidth called for root hub [ 0.873073] hub 10-0:1.0: USB hub found [ 0.873078] hub 10-0:1.0: 2 ports detected [ 0.873196] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.873554] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.873558] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.873627] mousedev: PS/2 mouse device common for all mice [ 0.873715] rtc_cmos 00:03: RTC can wake from S4 [ 0.873811] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.873834] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.873893] device-mapper: uevent: version 1.0.3 [ 0.873937] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.874021] cpuidle: using governor ladder [ 0.874129] cpuidle: using governor menu [ 0.874135] ledtrig-cpu: registered to indicate activity on CPUs [ 0.874137] EFI Variables Facility v0.08 2004-May-17 [ 0.874277] ashmem: initialized [ 0.874370] TCP: cubic registered [ 0.874372] IPv6: Loaded, but administratively disabled, reboot required to enable [ 0.874373] NET: Registered protocol family 17 [ 0.874382] Key type dns_resolver registered [ 0.874620] Loading module verification certificates [ 0.875428] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a' [ 0.875438] registered taskstats version 1 [ 0.877664] Key type trusted registered [ 0.879881] Key type encrypted registered [ 0.883147] rtc_cmos 00:03: setting system clock to 2013-05-06 09:10:52 UTC (1367831452) [ 0.884360] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.884362] EDD information not available. [ 0.885652] Freeing unused kernel memory: 992k freed [ 0.885770] Write protecting the kernel read-only data: 12288k [ 0.889372] Freeing unused kernel memory: 1176k freed [ 0.892283] Freeing unused kernel memory: 1080k freed [ 0.913234] udevd[150]: starting version 175 [ 0.924114] Disabling lock debugging due to kernel taint [ 0.924766] ahci 0000:00:1f.2: version 3.0 [ 0.924819] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X [ 0.924857] ahci: SSS flag set, parallel bus scan disabled [ 0.924900] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.924904] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 0.924908] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.931779] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001) [ 0.931813] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 0.932047] scsi0 : pata_jmicron [ 0.932368] scsi1 : pata_jmicron [ 0.932539] ata1: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 16 [ 0.932541] ata2: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 16 [ 0.950083] cfg80211: Calling CRDA to update world regulatory domain [ 0.964801] scsi2 : ahci [ 0.965406] scsi3 : ahci [ 0.965492] scsi4 : ahci [ 0.965559] scsi5 : ahci [ 0.965641] scsi6 : ahci [ 0.965712] scsi7 : ahci [ 0.965740] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 50 [ 0.965743] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 50 [ 0.965745] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 50 [ 0.965746] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 50 [ 0.965748] ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 50 [ 0.965750] ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 50 [ 0.965832] ahci 0000:01:00.0: irq 51 for MSI/MSI-X [ 0.976384] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 0.980485] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.980495] ahci 0000:01:00.0: flags: 64bit ncq pio [ 0.981098] scsi8 : ahci [ 0.981164] scsi9 : ahci [ 0.981218] scsi10 : ahci [ 0.981269] scsi11 : ahci [ 0.981321] scsi12 : ahci [ 0.981370] scsi13 : ahci [ 0.981421] scsi14 : ahci [ 0.981474] scsi15 : ahci [ 0.981500] ata9: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff100 irq 51 [ 0.981503] ata10: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff180 irq 51 [ 0.981505] ata11: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff200 irq 51 [ 0.981506] ata12: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff280 irq 51 [ 0.981508] ata13: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff300 irq 51 [ 0.981510] ata14: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff380 irq 51 [ 0.981512] ata15: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff400 irq 51 [ 0.981514] ata16: SATA max UDMA/133 abar m2048@0xfbcff000 port 0xfbcff480 irq 51 [ 0.981659] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.981662] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.981873] scsi16 : ahci [ 0.981936] scsi17 : ahci [ 0.981965] ata17: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 19 [ 0.981968] ata18: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 19 [ 1.300356] ata17: SATA link down (SStatus 0 SControl 300) [ 1.300359] ata14: SATA link down (SStatus 0 SControl 300) [ 1.300374] ata15: SATA link down (SStatus 0 SControl 300) [ 1.300392] ata13: SATA link down (SStatus 0 SControl 300) [ 1.300405] ata18: SATA link down (SStatus 0 SControl 300) [ 1.300411] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.300429] ata11: SATA link down (SStatus 0 SControl 300) [ 1.300444] ata12: SATA link down (SStatus 0 SControl 300) [ 1.300567] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.300838] ata16.00: configured for UDMA/66 [ 1.308265] ata10: SATA link down (SStatus 0 SControl 300) [ 1.308293] ata9: SATA link down (SStatus 0 SControl 300) [ 1.456021] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.458315] ata3.00: ATAPI: ATAPI iHES108 2, 7L05, max UDMA/100 [ 1.460313] ata3.00: configured for UDMA/100 [ 1.465470] scsi 2:0:0:0: CD-ROM ATAPI iHES108 2 7L05 PQ: 0 ANSI: 5 [ 1.469084] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.469088] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.469395] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.469506] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.663893] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 1.787807] ata4: SATA link down (SStatus 0 SControl 300) [ 1.799779] tsc: Refined TSC clocksource calibration: 2664.772 MHz [ 1.831952] usb 3-2: New USB device found, idVendor=04a9, idProduct=220d [ 1.831957] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.831960] usb 3-2: Product: CanoScan [ 1.831963] usb 3-2: Manufacturer: Canon [ 2.071619] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 2.253822] usb 4-1: New USB device found, idVendor=046d, idProduct=c313 [ 2.253827] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.253830] usb 4-1: Product: USB Multimedia Keyboard [ 2.253833] usb 4-1: Manufacturer: LITEON Technology [ 2.279428] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.281868] ata5.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 2.281873] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.284115] ata5.00: configured for UDMA/133 [ 2.284431] scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 2.284628] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.284632] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.284767] sd 4:0:0:0: [sda] Write Protect is off [ 2.284770] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.284875] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.289817] usbcore: registered new interface driver usbhid [ 2.289820] usbhid: USB HID core driver [ 2.292400] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2 [ 2.292528] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input0 [ 2.298778] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3 [ 2.298883] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input1 [ 2.302797] sda: sda1 sda2 < sda5 > [ 2.303404] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.443126] bio: create slab at 1 [ 2.495408] usb 4-2: new low-speed USB device number 3 using uhci_hcd [ 2.671466] usb 4-2: New USB device found, idVendor=046d, idProduct=c03e [ 2.671469] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.671471] usb 4-2: Product: USB-PS/2 Optical Mouse [ 2.671472] usb 4-2: Manufacturer: Logitech [ 2.687638] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4 [ 2.688241] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 2.775079] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.778057] ata6.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 2.778062] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.780289] ata6.00: configured for UDMA/133 [ 2.780653] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 2.780837] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.780862] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.780980] sd 5:0:0:0: [sdb] Write Protect is off [ 2.780984] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.781074] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.795406] sdb: sdb1 [ 2.795965] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.270728] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.271592] ata7.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.271597] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.272527] ata7.00: configured for UDMA/133 [ 3.272774] scsi 6:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 3.273087] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.273099] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.273279] sd 6:0:0:0: [sdc] Write Protect is off [ 3.273282] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.273356] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.296071] sdc: unknown partition table [ 3.296554] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.590450] ata8: SATA link down (SStatus 0 SControl 300) [ 3.590796] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 3.591110] scsi 15:0:0:0: Attached scsi generic sg4 type 3 [ 10.133663] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 10.135419] XFS (dm-0): Mounting Filesystem [ 10.231753] XFS (dm-0): Ending clean mount [ 10.884042] init: ureadahead main process (544) terminated with status 5 [ 11.342391] Adding 3903484k swap on /dev/mapper/jupiter-swap. Priority:-1 extents:1 across:3903484k [ 11.448926] XFS (dm-8): Mounting Filesystem [ 11.576362] XFS (dm-8): Ending clean mount [ 11.578777] kjournald starting. Commit interval 5 seconds [ 11.578942] EXT3-fs (sda1): using internal journal [ 11.578944] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 11.608531] XFS (dm-1): Mounting Filesystem [ 11.700682] XFS (dm-1): Ending clean mount [ 11.734236] XFS (dm-6): Mounting Filesystem [ 12.022624] XFS (dm-6): Ending clean mount [ 12.334522] XFS (dm-7): Mounting Filesystem [ 12.922881] XFS (dm-7): Ending clean mount [ 12.975519] XFS (dm-2): Mounting Filesystem [ 13.362320] XFS (dm-2): Ending clean mount [ 13.371666] XFS (dm-3): Mounting Filesystem [ 13.492128] XFS (dm-3): Ending clean mount [ 13.506480] XFS (dm-4): Mounting Filesystem [ 13.579306] XFS (dm-4): Ending clean mount [ 13.615944] XFS (dm-5): Mounting Filesystem [ 13.691007] XFS (dm-5): Ending clean mount [ 13.721444] XFS (dm-11): Mounting Filesystem [ 13.853648] XFS (dm-11): Ending clean mount [ 13.866396] XFS (dm-12): Mounting Filesystem [ 13.996757] XFS (dm-12): Ending clean mount [ 14.029111] XFS (dm-13): Mounting Filesystem [ 14.177830] XFS (dm-13): Ending clean mount [ 14.196276] XFS (dm-14): Mounting Filesystem [ 14.283466] XFS (dm-14): Ending clean mount [ 14.315216] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 14.978555] udevd[793]: starting version 175 [ 15.835707] it87: Found IT8720F chip at 0x290, revision 8 [ 15.835714] it87: VID is disabled (pins used for GPIO) [ 15.835723] it87: Routing internal VCCH to in7 [ 15.835727] it87: Beeping is supported [ 18.211888] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11 [ 18.322107] wmi: Mapper loaded [ 18.422926] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11 [ 18.424011] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11 [ 18.424957] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11 [ 18.426035] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11 [ 18.426941] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11 [ 18.427954] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11 [ 18.428968] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11 [ 18.429908] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 18.459300] EDAC MC: Ver: 3.0.0 [ 18.480867] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20121018/utaddress-251) [ 18.480872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.480889] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 18.497678] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 [ 18.497706] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) [ 18.497710] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 18.540278] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 18.888480] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 18.953746] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 19.028478] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 19.028559] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 19.028636] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 19.028709] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 19.028785] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 19.028862] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 19.028938] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 19.029017] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 19.029288] hda_intel: Disabling MSI [ 19.029296] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client [ 20.374597] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13 [ 20.374663] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14 [ 20.374722] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15 [ 20.374778] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16 [ 20.647008] nvidia: module license 'NVIDIA' taints kernel. [ 20.654742] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.654868] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013 [ 20.749635] type=1400 audit(1367831472.375:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1183 comm="apparmor_parser" [ 20.749684] type=1400 audit(1367831472.375:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1084 comm="apparmor_parser" [ 20.749945] type=1400 audit(1367831472.375:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1183 comm="apparmor_parser" [ 20.749994] type=1400 audit(1367831472.375:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1084 comm="apparmor_parser" [ 20.750118] type=1400 audit(1367831472.375:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1183 comm="apparmor_parser" [ 20.750170] type=1400 audit(1367831472.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1084 comm="apparmor_parser" [ 21.501374] init: avahi-cups-reload main process (1218) terminated with status 1 [ 22.063181] lp: driver loaded but no devices found [ 22.583514] ppdev: user-space parallel port driver [ 22.803039] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.107106] type=1400 audit(1367831474.735:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1317 comm="apparmor_parser" [ 23.107564] type=1400 audit(1367831474.735:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1317 comm="apparmor_parser" [ 24.241038] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 25.459008] wlan0: authenticate with 10:bf:48:d9:23:28 [ 25.474964] wlan0: direct probe to 10:bf:48:d9:23:28 (try 1/3) [ 25.678803] wlan0: send auth to 10:bf:48:d9:23:28 (try 2/3) [ 25.680250] wlan0: authenticated [ 25.682810] wlan0: associate with 10:bf:48:d9:23:28 (try 1/3) [ 25.685775] wlan0: RX AssocResp from 10:bf:48:d9:23:28 (capab=0x431 status=0 aid=1) [ 25.685843] wlan0: associated [ 28.227661] init: failsafe main process (1278) killed by TERM signal [ 29.411279] type=1400 audit(1367831481.043:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1640 comm="apparmor_parser" [ 29.411597] type=1400 audit(1367831481.043:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1640 comm="apparmor_parser" [ 29.411772] type=1400 audit(1367831481.043:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1640 comm="apparmor_parser" [ 29.411870] type=1400 audit(1367831481.043:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1644 comm="apparmor_parser" [ 29.412314] type=1400 audit(1367831481.047:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1644 comm="apparmor_parser" [ 29.499051] type=1400 audit(1367831481.131:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1639 comm="apparmor_parser" [ 29.499286] type=1400 audit(1367831481.131:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1639 comm="apparmor_parser" [ 29.508420] type=1400 audit(1367831481.143:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1637 comm="apparmor_parser" [ 29.508665] type=1400 audit(1367831481.143:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1637 comm="apparmor_parser" [ 29.514108] type=1400 audit(1367831481.147:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1638 comm="apparmor_parser" [ 30.843982] init: udev-fallback-graphics main process (1697) terminated with status 1 [ 31.869648] init: gdm main process (1797) killed by TERM signal