[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-14-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-22ubuntu4) ) #24-Ubuntu SMP Fri Mar 22 19:45:03 UTC 2013 (Ubuntu 3.8.0-14.24-generic 3.8.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-14-generic root=UUID=badfc24e-a130-447b-9b5b-37d93f64f5df ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7000000-0x00000000ceffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfef2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfef3000-0x00000000cfefffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e1ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-73PVM-S2H/GA-73PVM-S2H, BIOS F6 03/11/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 base 0CFF00000 mask FFFF00000 write-through [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4cf0-0x000f4cff] mapped at [ffff8800000f4cf0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfdeffff] [ 0.000000] [mem 0x00000000-0xcfbfffff] page 2M [ 0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcfdeffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff] [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfdee000-0xcfdeffff] [ 0.000000] RAMDISK: [mem 0x3611c000-0x37085fff] [ 0.000000] ACPI: RSDP 00000000000f6600 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfef3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfef30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfef3180 052C6 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfef1800 00040 [ 0.000000] ACPI: HPET 00000000cfef85c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfef8640 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfef84c0 00098 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] [ 0.000000] NODE_DATA [mem 0x12fffb000-0x12fffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x12fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xc6ffffff] [ 0.000000] node 0: [mem 0xcf000000-0xcfdeffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] On node 0 totalpages: 1015166 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12728 pages used for memmap [ 0.000000] DMA32 zone: 801848 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 193536 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7000000 - 00000000cf000000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef3000 [ 0.000000] PM: Registered nosave memory: 00000000cfef3000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e2000000 [ 0.000000] PM: Registered nosave memory: 00000000e2000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xe2000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85056 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999296 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-14-generic root=UUID=badfc24e-a130-447b-9b5b-37d93f64f5df ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3897008k/4980736k available (7004k kernel code, 920072k absent, 163656k reserved, 6240k data, 992k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2999.911 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.82 BogoMIPS (lpj=11999644) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004054] AppArmor: AppArmor initialized [ 0.004055] Yama: becoming mindful. [ 0.004369] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010303] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011929] Mount-cache hash table entries: 256 [ 0.012169] Initializing cgroup subsys cpuacct [ 0.012172] Initializing cgroup subsys memory [ 0.012182] Initializing cgroup subsys devices [ 0.012184] Initializing cgroup subsys freezer [ 0.012185] Initializing cgroup subsys blkio [ 0.012187] Initializing cgroup subsys perf_event [ 0.012189] Initializing cgroup subsys hugetlb [ 0.012217] CPU: Physical Processor ID: 0 [ 0.012218] CPU: Processor Core ID: 0 [ 0.012220] mce: CPU supports 6 MCE banks [ 0.012227] CPU0: Thermal monitoring enabled (TM2) [ 0.012231] process: using mwait in idle threads [ 0.012236] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012236] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.012236] tlb_flushall_shift: -1 [ 0.012328] Freeing SMP alternatives: 24k freed [ 0.014539] ACPI: Core revision 20121018 [ 0.017738] ftrace: allocating 26682 entries in 105 pages [ 0.024531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065341] smpboot: CPU0: Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz (fam: 06, model: 17, stepping: 0a) [ 0.068000] Performance Events: 4-deep LBR, Core2 events, Intel PMU driver. [ 0.068000] ... version: 2 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.068000] smpboot: Booting Node 0, Processors #1 [ 0.079014] Brought up 2 CPUs [ 0.079020] smpboot: Total of 2 processors activated (11999.64 BogoMIPS) [ 0.080083] devtmpfs: initialized [ 0.080903] EVM: security.selinux [ 0.080904] EVM: security.SMACK64 [ 0.080906] EVM: security.capability [ 0.080918] PM: Registering ACPI NVS region [mem 0xcfef0000-0xcfef2fff] (12288 bytes) [ 0.080918] regulator-dummy: no parameters [ 0.080918] NET: Registered protocol family 16 [ 0.080988] ACPI: bus type pci registered [ 0.081040] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) [ 0.081042] PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in E820 [ 0.085904] PCI: Using configuration type 1 for base access [ 0.085994] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.085995] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.085996] mtrr: probably your BIOS does not setup all CPUs. [ 0.085997] mtrr: corrected configuration. [ 0.086666] bio: create slab at 0 [ 0.086666] ACPI: Added _OSI(Module Device) [ 0.086666] ACPI: Added _OSI(Processor Device) [ 0.086666] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.086666] ACPI: Added _OSI(Processor Aggregator Device) [ 0.086666] ACPI: EC: Look up EC in DSDT [ 0.090233] ACPI: Interpreter enabled [ 0.090237] ACPI: (supports S0 S1 S4 S5) [ 0.090251] ACPI: Using IOAPIC for interrupt routing [ 0.094326] ACPI: No dock devices found. [ 0.094329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.094363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.094365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.094446] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.094448] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.094500] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge [ 0.094520] PCI host bridge to bus 0000:00 [ 0.094522] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.094524] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.094526] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.094528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.094530] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.094531] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff] [ 0.094545] pci 0000:00:00.0: [10de:07c1] type 00 class 0x060000 [ 0.094637] pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000 [ 0.094776] pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000 [ 0.094907] pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000 [ 0.095039] pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000 [ 0.095170] pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000 [ 0.095302] pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000 [ 0.095433] pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000 [ 0.095565] pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000 [ 0.095697] pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000 [ 0.095831] pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100 [ 0.095875] pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500 [ 0.095887] pci 0000:00:03.1: reg 10: [io 0xc000-0xc03f] [ 0.095905] pci 0000:00:03.1: reg 20: [io 0x1c00-0x1c3f] [ 0.095911] pci 0000:00:03.1: reg 24: [io 0x1c80-0x1cbf] [ 0.095941] pci 0000:00:03.1: PME# supported from D3hot D3cold [ 0.095955] pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000 [ 0.096013] pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000 [ 0.096147] pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310 [ 0.096156] pci 0000:00:04.0: reg 10: [mem 0xe5108000-0xe5108fff] [ 0.096196] pci 0000:00:04.0: supports D1 D2 [ 0.096198] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096211] pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320 [ 0.096222] pci 0000:00:04.1: reg 10: [mem 0xe5107000-0xe51070ff] [ 0.096269] pci 0000:00:04.1: supports D1 D2 [ 0.096271] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096294] pci 0000:00:08.0: [10de:056c] type 00 class 0x01018a [ 0.096318] pci 0000:00:08.0: reg 20: [io 0xf000-0xf00f] [ 0.096352] pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300 [ 0.096363] pci 0000:00:09.0: reg 10: [mem 0xe5100000-0xe5103fff] [ 0.096408] pci 0000:00:09.0: PME# supported from D3hot D3cold [ 0.096421] pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401 [ 0.096459] pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400 [ 0.096490] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096504] pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400 [ 0.096534] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096547] pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400 [ 0.096577] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096590] pci 0000:00:0e.0: [10de:07f4] type 00 class 0x010601 [ 0.096599] pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7] [ 0.096604] pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.096609] pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977] [ 0.096613] pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73] [ 0.096618] pci 0000:00:0e.0: reg 20: [io 0xdc00-0xdc0f] [ 0.096623] pci 0000:00:0e.0: reg 24: [mem 0xe5104000-0xe5105fff] [ 0.096655] pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000 [ 0.096665] pci 0000:00:0f.0: reg 10: [mem 0xe5109000-0xe5109fff] [ 0.096670] pci 0000:00:0f.0: reg 14: [io 0xe000-0xe007] [ 0.096675] pci 0000:00:0f.0: reg 18: [mem 0xe510a000-0xe510a0ff] [ 0.096680] pci 0000:00:0f.0: reg 1c: [mem 0xe5106000-0xe510600f] [ 0.096714] pci 0000:00:0f.0: supports D1 D2 [ 0.096715] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096729] pci 0000:00:10.0: [10de:07e1] type 00 class 0x030000 [ 0.096737] pci 0000:00:10.0: reg 10: [mem 0xe2000000-0xe2ffffff] [ 0.096743] pci 0000:00:10.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.096749] pci 0000:00:10.0: reg 1c: [mem 0xe3000000-0xe3ffffff 64bit] [ 0.096757] pci 0000:00:10.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.096817] pci 0000:01:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.096831] pci 0000:01:07.0: reg 10: [mem 0xe5004000-0xe50047ff] [ 0.096839] pci 0000:01:07.0: reg 14: [mem 0xe5000000-0xe5003fff] [ 0.096893] pci 0000:01:07.0: supports D1 D2 [ 0.096895] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot [ 0.096926] pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode) [ 0.096930] pci 0000:00:0a.0: bridge window [mem 0xe5000000-0xe50fffff] [ 0.096933] pci 0000:00:0a.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.096935] pci 0000:00:0a.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.096937] pci 0000:00:0a.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.096938] pci 0000:00:0a.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.096940] pci 0000:00:0a.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.096962] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.096965] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.096988] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.096991] pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff] [ 0.097014] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.097017] pci 0000:00:0d.0: bridge window [io 0xa000-0xafff] [ 0.097034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.097122] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.117434] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117470] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117506] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 0.117540] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117575] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117609] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117643] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117678] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117712] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.117747] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.117782] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.117816] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.117856] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0 [ 0.117890] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0 [ 0.117927] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.117962] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.117996] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.118031] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.118069] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.118104] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.118166] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.118222] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.118276] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.118330] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.118385] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.118439] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.118493] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.118547] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.118602] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.118657] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 0.118712] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 0.118767] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 0.118825] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 0.118880] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.118935] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.118990] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.119045] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.119100] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.119155] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.119210] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.119272] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none [ 0.119272] vgaarb: loaded [ 0.119272] vgaarb: bridge control possible 0000:00:10.0 [ 0.119272] SCSI subsystem initialized [ 0.119272] ACPI: bus type scsi registered [ 0.119272] libata version 3.00 loaded. [ 0.119272] ACPI: bus type usb registered [ 0.119272] usbcore: registered new interface driver usbfs [ 0.119272] usbcore: registered new interface driver hub [ 0.119272] usbcore: registered new device driver usb [ 0.119272] PCI: Using ACPI for IRQ routing [ 0.119272] PCI: pci_cache_line_size set to 64 bytes [ 0.119272] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.119272] e820: reserve RAM buffer [mem 0xc7000000-0xc7ffffff] [ 0.119272] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff] [ 0.119272] NetLabel: Initializing [ 0.119272] NetLabel: domain hash size = 128 [ 0.119272] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.119272] NetLabel: unlabeled traffic allowed by default [ 0.120020] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.120026] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.120030] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.122044] Switching to clocksource hpet [ 0.125684] AppArmor: AppArmor Filesystem Enabled [ 0.125706] pnp: PnP ACPI init [ 0.125716] ACPI: bus type pnp registered [ 0.125878] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.125880] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.125882] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.125884] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.125886] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.125888] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.125890] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.125892] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved [ 0.125894] system 00:00: [mem 0xc7000000-0xceffffff] has been reserved [ 0.125898] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125967] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.125969] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.125971] system 00:01: [io 0x0295-0x0314] has been reserved [ 0.125973] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.125975] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.125978] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125987] pnp 00:02: [dma 4] [ 0.126004] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.126063] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.126099] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.126119] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.126143] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.126386] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.126573] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.126669] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.126703] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.127163] system 00:0b: [mem 0xe0000000-0xe1ffffff] has been reserved [ 0.127166] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.127268] system 00:0c: [mem 0x000d2800-0x000d3fff] has been reserved [ 0.127271] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.127273] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.127275] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.127277] system 00:0c: [mem 0xcfef0000-0xcfefffff] could not be reserved [ 0.127279] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.127281] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.127284] system 00:0c: [mem 0x00100000-0xcfeeffff] could not be reserved [ 0.127286] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.127288] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.127290] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.127295] pnp: PnP ACPI: found 13 devices [ 0.127296] ACPI: ACPI bus type pnp unregistered [ 0.133626] pci 0000:00:10.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref] [ 0.133629] pci 0000:00:0a.0: PCI bridge to [bus 01] [ 0.133633] pci 0000:00:0a.0: bridge window [mem 0xe5000000-0xe50fffff] [ 0.133638] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.133640] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.133646] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.133648] pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff] [ 0.133653] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.133655] pci 0000:00:0d.0: bridge window [io 0xa000-0xafff] [ 0.133665] pci 0000:00:0a.0: setting latency timer to 64 [ 0.133672] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.133674] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.133676] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.133678] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.133679] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.133682] pci_bus 0000:01: resource 1 [mem 0xe5000000-0xe50fffff] [ 0.133683] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.133685] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.133687] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.133689] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff] [ 0.133690] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.133692] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.133694] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.133696] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] [ 0.133730] NET: Registered protocol family 2 [ 0.133885] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.134226] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.134562] TCP: Hash tables configured (established 32768 bind 32768) [ 0.134678] TCP: reno registered [ 0.134686] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.134730] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.134818] NET: Registered protocol family 1 [ 0.134991] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 0.135112] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 [ 0.135177] pci 0000:00:10.0: Boot video device [ 0.135181] PCI: CLS 32 bytes, default 64 [ 0.135214] Trying to unpack rootfs image as initramfs... [ 0.366786] Freeing initrd memory: 15784k freed [ 0.381404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.381415] software IO TLB [mem 0xc3000000-0xc7000000] (64MB) mapped at [ffff8800c3000000-ffff8800c6ffffff] [ 0.381829] Initialise module verification [ 0.381877] audit: initializing netlink socket (disabled) [ 0.381902] type=2000 audit(1364487073.380:1): initialized [ 0.403266] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.404730] VFS: Disk quotas dquot_6.5.2 [ 0.404768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.405208] fuse init (API version 7.20) [ 0.405278] msgmni has been set to 7642 [ 0.405695] Key type asymmetric registered [ 0.405697] Asymmetric key parser 'x509' registered [ 0.405726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.405746] io scheduler noop registered [ 0.405748] io scheduler deadline registered (default) [ 0.405752] io scheduler cfq registered [ 0.405872] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.405926] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 0.405973] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 0.406023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.406036] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.406078] intel_idle: does not run on family 6 model 23 [ 0.406163] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.406168] ACPI: Power Button [PWRB] [ 0.406209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.406211] ACPI: Power Button [PWRF] [ 0.409218] GHES: HEST is not enabled! [ 0.409288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.429639] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.430763] Linux agpgart interface v0.103 [ 0.431861] brd: module loaded [ 0.432462] loop: module loaded [ 0.432745] libphy: Fixed MDIO Bus: probed [ 0.432799] tun: Universal TUN/TAP device driver, 1.6 [ 0.432800] tun: (C) 1999-2004 Max Krasnyansky [ 0.432833] PPP generic driver version 2.4.2 [ 0.432863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.432865] ehci-pci: EHCI PCI platform driver [ 0.432893] ehci-pci 0000:00:04.1: setting latency timer to 64 [ 0.432895] ehci-pci 0000:00:04.1: EHCI Host Controller [ 0.432901] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 0.432909] ehci-pci 0000:00:04.1: debug port 1 [ 0.432932] ehci-pci 0000:00:04.1: cache line size of 32 is not supported [ 0.432948] ehci-pci 0000:00:04.1: irq 22, io mem 0xe5107000 [ 0.444014] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.444056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.444059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.444062] usb usb1: Product: EHCI Host Controller [ 0.444064] usb usb1: Manufacturer: Linux 3.8.0-14-generic ehci_hcd [ 0.444067] usb usb1: SerialNumber: 0000:00:04.1 [ 0.444176] hub 1-0:1.0: USB hub found [ 0.444180] hub 1-0:1.0: 10 ports detected [ 0.444294] ehci-platform: EHCI generic platform driver [ 0.444300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.444319] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.444322] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.444326] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 0.444343] ohci_hcd 0000:00:04.0: irq 23, io mem 0xe5108000 [ 0.502014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.502016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.502018] usb usb2: Product: OHCI Host Controller [ 0.502019] usb usb2: Manufacturer: Linux 3.8.0-14-generic ohci_hcd [ 0.502021] usb usb2: SerialNumber: 0000:00:04.0 [ 0.502090] hub 2-0:1.0: USB hub found [ 0.502096] hub 2-0:1.0: 10 ports detected [ 0.502208] uhci_hcd: USB Universal Host Controller Interface driver [ 0.502258] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.502674] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.502679] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.502800] mousedev: PS/2 mouse device common for all mice [ 0.502936] rtc_cmos 00:04: RTC can wake from S4 [ 0.503072] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.503106] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.503174] device-mapper: uevent: version 1.0.3 [ 0.503222] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.503227] cpuidle: using governor ladder [ 0.503229] cpuidle: using governor menu [ 0.503234] ledtrig-cpu: registered to indicate activity on CPUs [ 0.503235] EFI Variables Facility v0.08 2004-May-17 [ 0.503372] ashmem: initialized [ 0.503469] TCP: cubic registered [ 0.503548] NET: Registered protocol family 10 [ 0.503693] NET: Registered protocol family 17 [ 0.503700] Key type dns_resolver registered [ 0.503856] Loading module verification certificates [ 0.504682] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 3a7a63e4b2fdd0246c2687e21935c75b5a92b507' [ 0.504693] registered taskstats version 1 [ 0.506714] Key type trusted registered [ 0.508297] Key type encrypted registered [ 0.510024] rtc_cmos 00:04: setting system clock to 2013-03-28 16:11:14 UTC (1364487074) [ 0.510067] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.510068] EDD information not available. [ 0.511205] Freeing unused kernel memory: 992k freed [ 0.511913] Write protecting the kernel read-only data: 12288k [ 0.514437] Freeing unused kernel memory: 1176k freed [ 0.517486] Freeing unused kernel memory: 1080k freed [ 0.527064] udevd[94]: starting version 175 [ 0.528690] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.583674] pata_amd 0000:00:08.0: version 0.4.1 [ 0.583712] pata_amd 0000:00:08.0: setting latency timer to 64 [ 0.584805] scsi0 : pata_amd [ 0.585050] scsi1 : pata_amd [ 0.585189] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.585191] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.585708] Disabling lock debugging due to kernel taint [ 0.586155] ahci 0000:00:0e.0: version 3.0 [ 0.586277] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.586304] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ [ 0.586306] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP [ 0.586352] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.586355] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio [ 0.586358] ahci 0000:00:0e.0: setting latency timer to 64 [ 0.587111] scsi2 : ahci [ 0.587164] scsi3 : ahci [ 0.587210] scsi4 : ahci [ 0.587255] scsi5 : ahci [ 0.587286] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 21 [ 0.587288] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 21 [ 0.587289] ata5: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 21 [ 0.587291] ata6: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 21 [ 0.592941] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.593091] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 0.593105] forcedeth 0000:00:0f.0: setting latency timer to 64 [ 0.615567] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.668079] firewire_ohci 0000:01:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 0.764976] ata1.00: ATAPI: PLEXTOR DVDR PX-608AL, 1.01, max UDMA/33 [ 0.764983] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 0.796448] ata1.00: configured for UDMA/33 [ 0.818097] scsi 0:0:0:0: CD-ROM PLEXTOR DVDR PX-608AL 1.01 PQ: 0 ANSI: 5 [ 0.830254] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 0.830257] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.830365] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.830513] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.830597] ata2: port disabled--ignoring [ 0.904021] ata4: SATA link down (SStatus 0 SControl 300) [ 0.904043] ata6: SATA link down (SStatus 0 SControl 300) [ 0.904054] ata3: SATA link down (SStatus 0 SControl 300) [ 0.904064] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.904458] ata5.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100 [ 0.904461] ata5.00: 234441648 sectors, multi 16: LBA48 [ 0.906773] ata5.00: configured for UDMA/100 [ 0.906868] scsi 4:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5 [ 0.907021] sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 0.907027] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 0.907061] sd 4:0:0:0: [sda] Write Protect is off [ 0.907064] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.907087] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.962263] sda: sda1 sda2 < sda5 > [ 0.962537] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.116854] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:53:19:54 [ 1.116857] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 1.168094] firewire_core 0000:01:07.0: created device fw0: GUID 00ded1ca00001d7d, S400 [ 1.265815] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.265817] EXT4-fs (sda1): write access will be enabled during recovery [ 1.380016] tsc: Refined TSC clocksource calibration: 2999.999 MHz [ 1.380021] Switching to clocksource tsc [ 1.984010] usb 2-5: new full-speed USB device number 2 using ohci_hcd [ 2.187031] usb 2-5: New USB device found, idVendor=067b, idProduct=2303 [ 2.187036] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.492013] usb 2-7: new full-speed USB device number 3 using ohci_hcd [ 2.704033] usb 2-7: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32 [ 2.704038] usb 2-7: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32 [ 2.716028] usb 2-7: New USB device found, idVendor=1784, idProduct=0006 [ 2.716031] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.716034] usb 2-7: Product: eHome Infrared Transceiver [ 2.716037] usb 2-7: Manufacturer: TopSeed Technology Corp. [ 2.716039] usb 2-7: SerialNumber: TS001mDB [ 3.020012] usb 2-10: new full-speed USB device number 4 using ohci_hcd [ 3.238028] usb 2-10: New USB device found, idVendor=0bda, idProduct=8187 [ 3.238032] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.238035] usb 2-10: Product: Wireless USB Adapter [ 3.238037] usb 2-10: Manufacturer: Wireless USB Adapter [ 3.238040] usb 2-10: SerialNumber: 00C0023B9492 [ 4.233121] EXT4-fs (sda1): recovery complete [ 4.241622] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.713329] Adding 4059132k swap on /dev/sda5. Priority:-1 extents:1 across:4059132k [ 22.805444] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.837229] udevd[381]: starting version 175 [ 23.027232] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 23.027255] i2c i2c-1: nForce2 SMBus adapter at 0x1c80 [ 23.029010] lp: driver loaded but no devices found [ 23.040982] it87: Found IT8718F chip at 0x290, revision 5 [ 23.041010] it87: Beeping is supported [ 23.108154] nvidia: module license 'NVIDIA' taints kernel. [ 23.145130] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 [ 23.145153] nvidia 0000:00:10.0: setting latency timer to 64 [ 23.145160] vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 23.149934] wmi: Mapper loaded [ 23.150136] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.84 Wed Feb 27 04:58:49 PST 2013 [ 23.167379] parport_pc 00:08: reported by Plug and Play ACPI [ 23.167424] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 23.168495] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0x0 [ 23.198194] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 23.198200] hda_intel: Disabling MSI [ 23.198223] snd_hda_intel 0000:00:09.0: setting latency timer to 64 [ 23.203491] type=1400 audit(1364487097.189:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=630 comm="apparmor_parser" [ 23.203778] type=1400 audit(1364487097.189:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser" [ 23.203933] type=1400 audit(1364487097.189:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser" [ 23.264251] lp0: using parport0 (interrupt-driven). [ 23.325014] ppdev: user-space parallel port driver [ 23.325673] cfg80211: Calling CRDA to update world regulatory domain [ 23.335784] usbcore: registered new interface driver usbserial [ 23.335976] usbcore: registered new interface driver usbserial_generic [ 23.336378] usbserial: USB Serial support registered for generic [ 23.338492] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0x0 [ 23.339199] usbcore: registered new interface driver pl2303 [ 23.339409] usbserial: USB Serial support registered for pl2303 [ 23.339588] pl2303 2-5:1.0: pl2303 converter detected [ 23.341028] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 23.346144] Registered IR keymap rc-rc6-mce [ 23.347915] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:04.0/usb2/2-7/2-7:1.0/rc/rc0/input3 [ 23.347989] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:04.0/usb2/2-7/2-7:1.0/rc/rc0 [ 23.352791] IR NEC protocol handler initialized [ 23.356345] IR RC5(x) protocol handler initialized [ 23.358341] IR RC6 protocol handler initialized [ 23.360264] IR JVC protocol handler initialized [ 23.362075] IR Sony protocol handler initialized [ 23.363845] IR SANYO protocol handler initialized [ 23.365711] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input4 [ 23.365765] IR MCE Keyboard/mouse protocol handler initialized [ 23.368628] lirc_dev: IR Remote Control driver registered, major 250 [ 23.369808] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 23.369809] IR LIRC bridge handler initialized [ 23.374122] usb 2-5: pl2303 converter now attached to ttyUSB0 [ 23.485495] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 23.515952] cfg80211: World regulatory domain updated: [ 23.515954] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.515956] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.515958] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.515959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.515961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.515962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.604019] mceusb 2-7:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1 [ 23.604030] mceusb 2-7:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) [ 23.604063] usbcore: registered new interface driver mceusb [ 24.014094] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 24.078380] init: failsafe main process (873) killed by TERM signal [ 24.168017] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 24.442431] type=1400 audit(1364487098.429:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=944 comm="apparmor_parser" [ 24.442651] type=1400 audit(1364487098.429:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=944 comm="apparmor_parser" [ 24.446516] type=1400 audit(1364487098.433:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=947 comm="apparmor_parser" [ 24.446740] type=1400 audit(1364487098.433:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=947 comm="apparmor_parser" [ 24.448803] type=1400 audit(1364487098.437:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=950 comm="apparmor_parser" [ 24.449190] type=1400 audit(1364487098.437:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=950 comm="apparmor_parser" [ 24.449346] type=1400 audit(1364487098.437:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=950 comm="apparmor_parser" [ 24.453288] Bluetooth: Core ver 2.16 [ 24.453306] NET: Registered protocol family 31 [ 24.453308] Bluetooth: HCI device and connection manager initialized [ 24.453469] Bluetooth: HCI socket layer initialized [ 24.453472] Bluetooth: L2CAP socket layer initialized [ 24.453477] Bluetooth: SCO socket layer initialized [ 24.462086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.462088] Bluetooth: BNEP filters: protocol multicast [ 24.462095] Bluetooth: BNEP socket layer initialized [ 24.478899] Bluetooth: RFCOMM TTY layer initialized [ 24.478920] Bluetooth: RFCOMM socket layer initialized [ 24.478921] Bluetooth: RFCOMM ver 1.11 [ 24.760863] init: avahi-cups-reload main process (986) terminated with status 1 [ 24.810651] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5