[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-38-generic (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #61-Ubuntu SMP Tue Feb 19 12:20:02 UTC 2013 (Ubuntu 3.2.0-38.61-generic 3.2.37)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: ECS                              K7S5A                           /K7S5A                           , BIOS 07.00T                           04/02/01                        
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 base 0D0000000 mask FFC000000 write-combining
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 1fff0000 @ 1bfa000-1c00000
[    0.000000] RAMDISK: 1e78d000 - 1f510000
[    0.000000] ACPI: RSDP 000fa300 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 1fff0000 00028 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACP 1fff0030 00074 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: DSDT 1fff0100 032F9 (v01    SiS      735 00000100 MSFT 0100000D)
[    0.000000] ACPI: FACS 1fff8000 00040
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fff0000
[    0.000000]   low ram: 0 - 1fff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fff0
[    0.000000] On node 0 totalpages: 130943
[    0.000000] free_area_init_node: node 0, pgdat c1827c00, node_mem_map dfbef200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125968 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @dfbde000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129919
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-38-generic root=UUID=da6f2e3a-5d58-4150-b07d-78ff75db261b ro vga=0x0305 noquiet noplymouth
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2096640 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 493284k/524224k available (5625k kernel code, 30488k reserved, 2774k data, 712k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[    0.000000]       .init : 0xc1835000 - 0xc18e7000   ( 712 kB)
[    0.000000]       .data : 0xc157e704 - 0xc1834300   (2774 kB)
[    0.000000]       .text : 0xc1000000 - 0xc157e704   (5625 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=de008000 soft=de00a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 995.771 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1991.54 BogoMIPS (lpj=3983084)
[    0.004041] pid_max: default: 32768 minimum: 301
[    0.004135] Security Framework initialized
[    0.004228] AppArmor: AppArmor initialized
[    0.004242] Yama: becoming mindful.
[    0.004432] Mount-cache hash table entries: 512
[    0.008435] Initializing cgroup subsys cpuacct
[    0.008476] Initializing cgroup subsys memory
[    0.008511] Initializing cgroup subsys devices
[    0.008528] Initializing cgroup subsys freezer
[    0.008543] Initializing cgroup subsys blkio
[    0.008572] Initializing cgroup subsys perf_event
[    0.008658] mce: CPU supports 4 MCE banks
[    0.008816] SMP alternatives: switching to UP code
[    0.024540] Freeing SMP alternatives: 24k freed
[    0.024641] ACPI: Core revision 20110623
[    0.030046] ACPI: setting ELCR to 0200 (from 1820)
[    0.031865] ftrace: allocating 25482 entries in 50 pages
[    0.040169] weird, boot CPU (#0) not listed by the BIOS.
[    0.040201] SMP motherboard not detected.
[    0.040212] Local APIC not detected. Using dummy APIC emulation.
[    0.040222] SMP disabled
[    0.040233] Performance Events: 
[    0.040242] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.040256] no hardware sampling interrupt available.
[    0.040269] AMD PMU driver.
[    0.040283] ... version:                0
[    0.040292] ... bit width:              48
[    0.040301] ... generic registers:      4
[    0.040310] ... value mask:             0000ffffffffffff
[    0.040320] ... max period:             00007fffffffffff
[    0.040329] ... fixed-purpose events:   0
[    0.040338] ... event mask:             000000000000000f
[    0.041101] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.041261] Brought up 1 CPUs
[    0.041275] Total of 1 processors activated (1991.54 BogoMIPS).
[    0.041863] devtmpfs: initialized
[    0.042232] EVM: security.selinux
[    0.042242] EVM: security.SMACK64
[    0.042250] EVM: security.capability
[    0.042422] PM: Registering ACPI NVS region at 1fff8000 (32768 bytes)
[    0.045470] print_constraints: dummy: 
[    0.045550] RTC time: 17:27:10, date: 03/20/13
[    0.045696] NET: Registered protocol family 16
[    0.046112] EISA bus registered
[    0.046248] ACPI: bus type pci registered
[    0.048246] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[    0.048273] PCI: Using configuration type 1 for base access
[    0.052204] bio: create slab <bio-0> at 0
[    0.052640] ACPI: Added _OSI(Module Device)
[    0.052666] ACPI: Added _OSI(Processor Device)
[    0.052677] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052688] ACPI: Added _OSI(Processor Aggregator Device)
[    0.053800] ACPI: EC: Look up EC in DSDT
[    0.060870] ACPI: Interpreter enabled
[    0.060926] ACPI: (supports S0 S1 S4 S5)
[    0.060982] ACPI: Using PIC for interrupt routing
[    0.063063] ACPI: Power Resource [FDDP] (off)
[    0.063698] ACPI: Power Resource [URP1] (off)
[    0.064589] ACPI: Power Resource [URP2] (off)
[    0.065562] ACPI: Power Resource [LPTP] (off)
[    0.070721] ACPI: No dock devices found.
[    0.070752] HEST: Table not found.
[    0.070774] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.071517] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.071923] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.071932] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.071940] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.071948] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
[    0.071955] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
[    0.071962] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[    0.072062] pci 0000:00:00.0: [1039:0735] type 0 class 0x000600
[    0.072083] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff]
[    0.072192] pci 0000:00:01.0: [1039:0001] type 1 class 0x000604
[    0.072255] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[    0.072334] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.072382] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[    0.072438] pci 0000:00:02.1: reg 20: [io  0x0c00-0x0c1f]
[    0.072489] pci 0000:00:02.2: [1039:7001] type 0 class 0x000c03
[    0.072509] pci 0000:00:02.2: reg 10: [mem 0xcfffe000-0xcfffefff]
[    0.072593] pci 0000:00:02.3: [1039:7001] type 0 class 0x000c03
[    0.072613] pci 0000:00:02.3: reg 10: [mem 0xcffff000-0xcfffffff]
[    0.072712] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[    0.072767] pci 0000:00:02.5: reg 20: [io  0xff00-0xff0f]
[    0.072842] pci 0000:00:0d.0: [1274:5880] type 0 class 0x000401
[    0.072866] pci 0000:00:0d.0: reg 10: [io  0xdc00-0xdc3f]
[    0.072955] pci 0000:00:0d.0: supports D2
[    0.072988] pci 0000:00:0f.0: [10ec:8139] type 0 class 0x000200
[    0.073012] pci 0000:00:0f.0: reg 10: [io  0xd800-0xd8ff]
[    0.073028] pci 0000:00:0f.0: reg 14: [mem 0xcfffdf00-0xcfffdfff]
[    0.073108] pci 0000:00:0f.0: supports D1 D2
[    0.073114] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[    0.073126] pci 0000:00:0f.0: PME# disabled
[    0.073200] pci 0000:01:00.0: [10de:0322] type 0 class 0x000300
[    0.073225] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[    0.073240] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff pref]
[    0.073285] pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref]
[    0.073374] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.073394] pci 0000:00:01.0:   bridge window [mem 0xcde00000-0xcfefffff]
[    0.073404] pci 0000:00:01.0:   bridge window [mem 0xadc00000-0xcdcfffff pref]
[    0.073419] pci_bus 0000:00: on NUMA node 0
[    0.073432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.073993]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.076609] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.076797] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.076958] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
[    0.077112] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.077264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.077421] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.077578] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.077736] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.078192] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.078223] vgaarb: loaded
[    0.078232] vgaarb: bridge control possible 0000:01:00.0
[    0.078640] i2c-core: driver [aat2870] using legacy suspend method
[    0.078653] i2c-core: driver [aat2870] using legacy resume method
[    0.078991] SCSI subsystem initialized
[    0.079243] libata version 3.00 loaded.
[    0.079430] usbcore: registered new interface driver usbfs
[    0.079481] usbcore: registered new interface driver hub
[    0.079626] usbcore: registered new device driver usb
[    0.080070] PCI: Using ACPI for IRQ routing
[    0.080101] PCI: pci_cache_line_size set to 32 bytes
[    0.080188] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.080195] reserve RAM buffer: 000000001fff0000 - 000000001fffffff 
[    0.080569] NetLabel: Initializing
[    0.080589] NetLabel:  domain hash size = 128
[    0.080598] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.080651] NetLabel:  unlabeled traffic allowed by default
[    0.080939] Switching to clocksource pit
[    0.103347] AppArmor: AppArmor Filesystem Enabled
[    0.103487] pnp: PnP ACPI init
[    0.103551] ACPI: bus type pnp registered
[    0.103830] pnp 00:00: [bus 00-ff]
[    0.103840] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.103848] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.103854] pnp 00:00: [io  0x0d00-0xffff window]
[    0.103861] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.103868] pnp 00:00: [mem 0x000cb000-0x000dffff window]
[    0.103874] pnp 00:00: [mem 0x20000000-0xffdfffff window]
[    0.103881] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[    0.104037] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.104144] pnp 00:01: [dma 4]
[    0.104151] pnp 00:01: [io  0x0000-0x000f]
[    0.104157] pnp 00:01: [io  0x0081-0x0083]
[    0.104163] pnp 00:01: [io  0x0087]
[    0.104168] pnp 00:01: [io  0x0089-0x008b]
[    0.104173] pnp 00:01: [io  0x008f]
[    0.104178] pnp 00:01: [io  0x00c0-0x00df]
[    0.104266] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.104298] pnp 00:02: [io  0x0070-0x0071]
[    0.104310] pnp 00:02: [irq 8]
[    0.104376] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.104401] pnp 00:03: [io  0x0061]
[    0.104474] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.104501] pnp 00:04: [io  0x00f0-0x00ff]
[    0.104509] pnp 00:04: [irq 13]
[    0.104572] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.104649] pnp 00:05: [io  0x0060]
[    0.104656] pnp 00:05: [io  0x0064]
[    0.104663] pnp 00:05: [irq 1]
[    0.104750] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.104981] pnp 00:06: [io  0x03f2-0x03f3]
[    0.104988] pnp 00:06: [io  0x03f4-0x03f5]
[    0.104994] pnp 00:06: [io  0x03f7]
[    0.105000] pnp 00:06: [irq 6]
[    0.105006] pnp 00:06: [dma 2]
[    0.105161] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.105672] pnp 00:07: [io  0x03f8-0x03ff]
[    0.105681] pnp 00:07: [irq 4]
[    0.105867] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.106363] pnp 00:08: [io  0x02f8-0x02ff]
[    0.106372] pnp 00:08: [irq 3]
[    0.106571] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.107327] pnp 00:09: [io  0x0378-0x037f]
[    0.107340] pnp 00:09: [irq 7]
[    0.107556] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.108108] pnp 00:0a: [io  0x0201-0x0208]
[    0.108226] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.108653] pnp 00:0b: [io  0x0300-0x0301]
[    0.108664] pnp 00:0b: [irq 10]
[    0.108787] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.109204] pnp: PnP ACPI: found 12 devices
[    0.109234] ACPI: ACPI bus type pnp unregistered
[    0.109252] PnPBIOS: Disabled by ACPI PNP
[    0.149960] Switching to clocksource acpi_pm
[    0.150062] PCI: max bus depth: 1 pci_try_num: 2
[    0.150099] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.150122] pci 0000:00:01.0:   bridge window [mem 0xcde00000-0xcfefffff]
[    0.150140] pci 0000:00:01.0:   bridge window [mem 0xadc00000-0xcdcfffff pref]
[    0.150181] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.150188] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.150196] pci_bus 0000:01: resource 1 [mem 0xcde00000-0xcfefffff]
[    0.150203] pci_bus 0000:01: resource 2 [mem 0xadc00000-0xcdcfffff pref]
[    0.150368] NET: Registered protocol family 2
[    0.150556] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.151222] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.151687] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.152203] TCP: Hash tables configured (established 16384 bind 16384)
[    0.152230] TCP reno registered
[    0.152249] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.152282] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.152571] NET: Registered protocol family 1
[    0.152986] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[    0.153008] PCI: setting IRQ 5 as level-triggered
[    0.153021] pci 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[    0.208106] pci 0000:00:02.2: PCI INT D disabled
[    0.208386] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.208402] PCI: setting IRQ 11 as level-triggered
[    0.208413] pci 0000:00:02.3: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    0.264081] pci 0000:00:02.3: PCI INT A disabled
[    0.264133] pci 0000:01:00.0: Boot video device
[    0.264141] PCI: CLS 32 bytes, default 32
[    0.265344] audit: initializing netlink socket (disabled)
[    0.265406] type=2000 audit(1363800430.262:1): initialized
[    0.317775] Trying to unpack rootfs image as initramfs...
[    0.377155] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.388479] VFS: Disk quotas dquot_6.5.2
[    0.388686] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.396398] fuse init (API version 7.17)
[    0.396869] msgmni has been set to 963
[    0.405411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.412170] io scheduler noop registered
[    0.412206] io scheduler deadline registered
[    0.412285] io scheduler cfq registered (default)
[    0.412765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.412867] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.413318] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.413355] ACPI: Sleep Button [SLPB]
[    0.413495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.413515] ACPI: Power Button [PWRF]
[    0.416953] ERST: Table is not found!
[    0.416984] GHES: HEST is not enabled!
[    0.417473] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.438204] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.438352] isapnp: Scanning for PnP cards...
[    0.529790] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.621699] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.661169] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.725369] Linux agpgart interface v0.103
[    0.736206] brd: module loaded
[    0.742325] loop: module loaded
[    0.742949] pata_sis 0000:00:02.5: version 0.5.2
[    0.748192] scsi0 : pata_sis
[    0.748666] scsi1 : pata_sis
[    0.750388] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.750417] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    0.751844] Fixed MDIO Bus: probed
[    0.751944] tun: Universal TUN/TAP device driver, 1.6
[    0.751957] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.752649] PPP generic driver version 2.4.2
[    0.756588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.756702] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.756775] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[    0.756840] ohci_hcd 0000:00:02.2: OHCI Host Controller
[    0.757091] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.757178] ohci_hcd 0000:00:02.2: irq 5, io mem 0xcfffe000
[    0.824554] hub 1-0:1.0: USB hub found
[    0.824600] hub 1-0:1.0: 3 ports detected
[    0.824829] ohci_hcd 0000:00:02.3: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    0.824918] ohci_hcd 0000:00:02.3: OHCI Host Controller
[    0.825198] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[    0.825283] ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000
[    0.972042] ata1.00: ATA-7: WDC WD1600AAJB-00PVA0, 00.07H00, max UDMA/100
[    0.972082] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.020196] hub 2-0:1.0: USB hub found
[    1.020240] hub 2-0:1.0: 3 ports detected
[    1.020461] uhci_hcd: USB Universal Host Controller Interface driver
[    1.020677] usbcore: registered new interface driver libusual
[    1.020827] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.020841] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.021153] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.024989] mousedev: PS/2 mouse device common for all mice
[    1.025776] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.025842] rtc0: alarms up to one month, 114 bytes nvram
[    1.026140] device-mapper: uevent: version 1.0.3
[    1.026476] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.026639] EISA: Probing bus 0 at eisa.0
[    1.026706] EISA: Detected 0 cards.
[    1.026740] cpufreq-nforce2: No nForce2 chipset.
[    1.026753] cpuidle: using governor ladder
[    1.026763] cpuidle: using governor menu
[    1.026773] EFI Variables Facility v0.08 2004-May-17
[    1.027391] TCP cubic registered
[    1.027862] NET: Registered protocol family 10
[    1.034477] NET: Registered protocol family 17
[    1.034535] Registering the dns_resolver key type
[    1.034654] Using IPI No-Shortcut mode
[    1.035154] PM: Hibernation image not present or could not be loaded.
[    1.035199] registered taskstats version 1
[    1.045486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.064199] ata1.01: ATA-7: ExcelStor Technology J8080, P21OA60A, max UDMA/133
[    1.064240] ata1.01: 160836480 sectors, multi 16: LBA48 
[    1.116076] isapnp: No Plug & Play device found
[    1.116156] ata1.00: configured for UDMA/100
[    1.169183] ata1.01: configured for UDMA/100
[    1.169721] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJB-0 00.0 PQ: 0 ANSI: 5
[    1.170517] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.170712] sd 0:0:0:0: [sda] Write Protect is off
[    1.170730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.170804] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.171646] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.179591] scsi 0:0:1:0: Direct-Access     ATA      ExcelStor Techno P21O PQ: 0 ANSI: 5
[    1.180588] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.199773]  sda: sda1 sda2 sda3 sda4
[    1.200317] sd 0:0:1:0: [sdb] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
[    1.200532] sd 0:0:1:0: [sdb] Write Protect is off
[    1.200550] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.200625] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.228599] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[    1.235151]  sdb: sdb1 sdb2 < sdb5 >
[    1.235773] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.237110] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.316704] Refined TSC clocksource calibration: 995.764 MHz.
[    1.316752] Switching to clocksource tsc
[    1.344566] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
[    1.344611] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.361219] ata2.00: configured for UDMA/33
[    1.373903] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL01 PQ: 0 ANSI: 5
[    1.381899] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.381943] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.382483] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.382965] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    1.628649] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[    1.768640] Freeing initrd memory: 13836k freed
[    1.823211] Initializing USB Mass Storage driver...
[    1.827636] scsi2 : usb-storage 1-1:1.0
[    1.827968] usbcore: registered new interface driver usb-storage
[    1.827983] USB Mass Storage support registered.
[    1.847058]   Magic number: 5:214:492
[    1.847426] rtc_cmos 00:02: setting system clock to 2013-03-20 17:27:12 UTC (1363800432)
[    1.847452] powernow-k8: Processor cpuid 670 not supported
[    1.847521] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.847533] EDD information not available.
[    1.848235] Freeing unused kernel memory: 712k freed
[    1.850708] Write protecting the kernel text: 5628k
[    1.850816] Write protecting the kernel read-only data: 2328k
[    1.934373] udevd[89]: starting version 175
[    1.999852] uvesafb: NVIDIA Corporation, NV34 Board - p162-1n , Chip Rev   , OEM: NVIDIA, VBE v3.0
[    2.020465] uvesafb: protected mode interface info at c000:dcd0
[    2.020501] uvesafb: pmi: set display start = c00cdd06, set palette = c00cdd70
[    2.020515] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    2.022341] uvesafb: VBIOS/hardware doesn't support DDC transfers
[    2.022356] uvesafb: no monitor limits have been set, default refresh rate will be used
[    2.030538] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[    2.032606] fbcon: VESA VGA (fb0) is primary device
[    2.262558] Console: switching to colour frame buffer device 80x30
[    2.265605] uvesafb: framebuffer at 0xb0000000, mapped to 0xe0880000, using 6144k, total 131072k
[    2.265736] fb0: VESA VGA frame buffer device
[    2.699976] Floppy drive(s): fd0 is 1.44M
[    2.772347] FDC 0 is a post-1991 82077
[    2.833964] scsi 2:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[    2.836450] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    2.845847] sd 2:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.862892] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
[    2.879893] sd 2:0:0:0: [sdc] Asking for cache data failed
[    2.880229] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    2.907910] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
[    2.924902] sd 2:0:0:0: [sdc] Asking for cache data failed
[    2.925150] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    2.944161] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.979172] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    3.144446] kjournald starting.  Commit interval 5 seconds
[    3.144811] EXT3-fs (sda2): mounted filesystem with ordered data mode
[   15.074991]  sdc: sdc1
[   15.106742] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
[   15.123743] sd 2:0:0:0: [sdc] Asking for cache data failed
[   15.123954] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[   15.124194] sd 2:0:0:0: [sdc] Attached SCSI disk
[   15.126312] 8139too: 8139too Fast Ethernet driver 0.9.28
[   15.126687] 8139too 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[   15.131754] 8139too 0000:00:0f.0: eth0: RealTek RTL8139 at 0xd800, 00:50:fc:79:8a:11, IRQ 5
[   15.137847] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.3/usb2/2-1/2-1:1.0/input/input3
[   15.139432] generic-usb 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.3-1/input0
[   15.140351] usbcore: registered new interface driver usbhid
[   15.140571] usbhid: USB HID core driver
[   31.430543] Adding 4192960k swap on /dev/sda4.  Priority:-1 extents:1 across:4192960k 
[   31.519841] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.608640] udevd[324]: starting version 175
[   31.806766] lp: driver loaded but no devices found
[   31.838048] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   32.242497] EXT3-fs (sda2): using internal journal
[   32.588555] agpgart-sis 0000:00:00.0: SiS chipset [1039/0735]
[   32.726547] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[   32.726950] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   32.726971] ACPI: resource 0000:00:02.1 [io  0x0c00-0x0c1f] conflicts with ACPI region SMRG [io 0xc00-0xc1f]
[   32.726978] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   32.727076] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[   32.727547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   32.892186] kjournald starting.  Commit interval 5 seconds
[   32.892710] EXT3-fs (sda1): using internal journal
[   32.892732] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   33.044241] kjournald starting.  Commit interval 5 seconds
[   33.045090] EXT3-fs (sda3): using internal journal
[   33.045111] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   33.210355] parport_pc 00:09: reported by Plug and Play ACPI
[   33.210429] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   33.296783] lp0: using parport0 (interrupt-driven).
[   33.332131] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 641kHz
[   33.955990] type=1400 audit(1363800464.602:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
[   33.968799] type=1400 audit(1363800464.618:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
[   33.969500] type=1400 audit(1363800464.618:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
[   34.439537] ppdev: user-space parallel port driver
[   34.537673] nvidia: module license 'NVIDIA' taints kernel.
[   34.537689] Disabling lock debugging due to kernel taint
[   34.542590] Bluetooth: Core ver 2.16
[   34.544174] NET: Registered protocol family 31
[   34.544187] Bluetooth: HCI device and connection manager initialized
[   34.544198] Bluetooth: HCI socket layer initialized
[   34.544204] Bluetooth: L2CAP socket layer initialized
[   34.544240] Bluetooth: SCO socket layer initialized
[   34.612348] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.612363] Bluetooth: BNEP filters: protocol multicast
[   34.692737] Bluetooth: RFCOMM TTY layer initialized
[   34.692761] Bluetooth: RFCOMM socket layer initialized
[   34.692767] Bluetooth: RFCOMM ver 1.11
[   34.924688] type=1400 audit(1363800465.574:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=578 comm="apparmor_parser"
[   34.926379] type=1400 audit(1363800465.574:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=578 comm="apparmor_parser"
[   36.521728] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   36.521750] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   36.521776] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   36.561184] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.35  Thu May 31 12:00:16 PDT 2012
[   37.925075] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[   37.925091] PCI: setting IRQ 12 as level-triggered
[   37.925105] snd_ens1371 0000:00:0d.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
[   39.460567] init: failsafe main process (698) killed by TERM signal
[   40.306919] type=1400 audit(1363800470.954:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=799 comm="apparmor_parser"
[   40.344176] type=1400 audit(1363800470.994:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=800 comm="apparmor_parser"
[   40.394546] type=1400 audit(1363800471.042:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[   40.407827] type=1400 audit(1363800471.054:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
[   40.414005] type=1400 audit(1363800471.062:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=802 comm="apparmor_parser"
[   40.615641] type=1400 audit(1363800471.262:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=803 comm="apparmor_parser"
[   40.683765] type=1400 audit(1363800471.330:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=803 comm="apparmor_parser"
[   40.729340] type=1400 audit(1363800471.378:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=803 comm="apparmor_parser"
[   40.730589] 8139too 0000:00:0f.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   40.743669] type=1400 audit(1363800471.390:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=803 comm="apparmor_parser"
[   40.796159] type=1400 audit(1363800471.442:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=803 comm="apparmor_parser"