[   16.227353] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[   16.234704] wlan0: send auth to 00:18:01:f7:4e:9c (try 1/3)
[   16.244535] wlan0: authenticated
[   16.244983] ath9k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   16.248156] wlan0: associate with 00:18:01:f7:4e:9c (try 1/3)
[   16.250800] wlan0: RX AssocResp from 00:18:01:f7:4e:9c (capab=0x431 status=0 aid=1)
[   16.250915] wlan0: associated
[   16.251008] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   16.251220] cfg80211: Calling CRDA for country: US
[   16.271540] ath: regdomain 0x8348 updated by CountryIE
[   16.271551] ath: EEPROM regdomain: 0x8348
[   16.271555] ath: EEPROM indicates we should expect a country code
[   16.271562] ath: doing EEPROM country->regdmn map search
[   16.271569] ath: country maps to regdmn code: 0x3a
[   16.271574] ath: Country alpha2 being used: US
[   16.271579] ath: Regpair used: 0x3a
[   16.271676] cfg80211: Regulatory domain changed to country: US
[   16.271683] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.271691] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   16.271698] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   16.271706] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.271713] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.271720] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.271728] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   16.296542] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:18:01:f7:4e:9c
[   43.677683] wlan0: deauthenticating from 00:18:01:f7:4e:9c by local choice (reason=3)
[   43.711490] cfg80211: Calling CRDA to update world regulatory domain
[   43.748624] cfg80211: World regulatory domain updated:
[   43.748637] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   43.748646] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   43.748653] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   43.748660] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   43.748665] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   43.748671] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   45.370964] init: anacron main process (1004) killed by TERM signal
[   45.591125] PM: Syncing filesystems ... done.
[   45.784676] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   45.800346] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   45.816467] Suspending console(s) (use no_console_suspend to debug)
[   45.817000] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   45.819562] sd 0:0:0:0: [sda] Stopping disk
[   46.292201] PM: suspend of devices complete after 475.443 msecs
[   46.292609] PM: late suspend of devices complete after 0.399 msecs
[   46.308300] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[   46.324123] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[   46.324209] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[   46.324293] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[   46.324377] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[   46.324479] PM: noirq suspend of devices complete after 31.862 msecs
[   46.324512] ACPI: Preparing to enter system sleep state S3
[   46.324983] PM: Saving platform NVS memory
[   46.335000] Disabling non-boot CPUs ...
[   46.336694] smpboot: CPU 1 is now offline
[   46.337295] ACPI: Low-level resume complete
[   46.337295] PM: Restoring platform NVS memory
[   46.337295] CPU0: Thermal monitoring handled by SMI
[   46.337295] Enabling non-boot CPUs ...
[   46.337295] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   46.336021] Disabled fast string operations
[   46.336021] CPU1: Thermal monitoring handled by SMI
[   46.349438] CPU1 is up
[   46.350561] ACPI: Waking up from system sleep state S3
[   46.396533] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[   46.396623] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[   46.396710] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[   46.396797] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[   46.412133] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[   46.444313] PM: noirq resume of devices complete after 80.054 msecs
[   46.444695] PM: early resume of devices complete after 0.285 msecs
[   46.444807] i915 0000:00:02.0: setting latency timer to 64
[   46.445001] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   46.445620] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   46.445656] usb usb2: root hub lost power or was reset
[   46.445687] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   46.445718] usb usb3: root hub lost power or was reset
[   46.445745] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   46.445776] usb usb4: root hub lost power or was reset
[   46.445802] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   46.445832] usb usb5: root hub lost power or was reset
[   46.445862] ehci-pci 0000:00:1d.7: setting latency timer to 64
[   46.445899] pci 0000:00:1e.0: setting latency timer to 64
[   46.445927] ahci 0000:00:1f.2: setting latency timer to 64
[   46.776111] ata2: SATA link down (SStatus 0 SControl 300)
[   46.780174] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[   46.914599] qcserial 1-2:1.1: no reset_resume for driver qcserial?
[   46.914886] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[   46.914925] qcserial 1-2:1.1: device disconnected
[   46.952117] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   46.955625] ata1.00: unexpected _GTF length (4)
[   46.956941] ata1.00: unexpected _GTF length (4)
[   46.957033] ata1.00: configured for UDMA/133
[   46.972275] sd 0:0:0:0: [sda] Starting disk
[   47.024190] usb 5-2: reset full-speed USB device number 3 using uhci_hcd
[   47.165148] usb 5-2: device firmware changed
[   47.276088] usb 1-5: reset high-speed USB device number 4 using ehci-pci
[   47.620529] PM: resume of devices complete after 1175.823 msecs
[   47.620662] qcserial 1-2:1.1: Qualcomm USB modem converter detected
[   47.620934] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
[   47.623108] usb 5-2: USB disconnect, device number 3
[   47.621447] Restarting tasks ... done.
[   47.756128] usb 5-2: new full-speed USB device number 4 using uhci_hcd
[   47.775867] video LNXVIDEO:00: Restoring backlight state
[   47.906779] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000
[   47.906792] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   48.276865] usb 1-3: new high-speed USB device number 7 using ehci-pci
[   48.420879] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138
[   48.420892] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   48.420901] usb 1-3: Product: USB2.0-CRW
[   48.420908] usb 1-3: Manufacturer: Generic
[   48.420916] usb 1-3: SerialNumber: 20090516388200000
[   48.455474] scsi5 : usb-storage 1-3:1.0
[   48.580147] usb 5-2: USB disconnect, device number 4
[   48.712162] usb 1-3: USB disconnect, device number 7
[   48.775019] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   49.676095] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[   49.828984] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3005
[   49.828997] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   57.229876] wlan0: authenticate with 00:18:01:f7:4e:9c
[   57.235881] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[   57.236119] wlan0: send auth to 00:18:01:f7:4e:9c (try 1/3)
[   57.238497] wlan0: authenticated
[   57.239513] ath9k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   57.240077] wlan0: associate with 00:18:01:f7:4e:9c (try 1/3)
[   57.242863] wlan0: RX AssocResp from 00:18:01:f7:4e:9c (capab=0x431 status=0 aid=1)
[   57.242985] wlan0: associated
[   57.243076] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   57.243282] cfg80211: Calling CRDA for country: US
[   57.280979] ath: regdomain 0x8348 updated by CountryIE
[   57.280993] ath: EEPROM regdomain: 0x8348
[   57.280997] ath: EEPROM indicates we should expect a country code
[   57.281003] ath: doing EEPROM country->regdmn map search
[   57.281010] ath: country maps to regdmn code: 0x3a
[   57.281015] ath: Country alpha2 being used: US
[   57.281019] ath: Regpair used: 0x3a
[   57.281124] cfg80211: Regulatory domain changed to country: US
[   57.281130] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   57.281137] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   57.281144] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   57.281150] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.281158] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.281164] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.281171] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   57.313526] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:18:01:f7:4e:9c