[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-38-generic (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #61-Ubuntu SMP Tue Feb 19 12:20:02 UTC 2013 (Ubuntu 3.2.0-38.61-generic 3.2.37) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved) [ 0.000000] BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Hewlett-Packard hp Compaq nc6000 (DD522AV) /0890, BIOS 68BDD Ver. F.0F 07/23/2004 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfa000-1c00000 [ 0.000000] RAMDISK: 36642000 - 37319000 [ 0.000000] ACPI: RSDP 000f6f80 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 3fff0c84 0002C (v01 HP HP0890 23070420 CPQ 00000001) [ 0.000000] ACPI: FACP 3fff0c00 00084 (v02 HP HP0890 00000002 CPQ 00000001) [ 0.000000] ACPI: DSDT 3fff0cb0 062D9 (v01 HP nc6000 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fffbe80 00040 [ 0.000000] ACPI: SSDT 3fff6f89 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 [ 0.000000] On node 0 totalpages: 261983 [ 0.000000] free_area_init_node: node 0, pgdat c1827c00, node_mem_map f5e42200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77e9000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic root=UUID=aab0ab86-d0b4-45fe-b55e-57463a40020e ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4193280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0) [ 0.000000] Memory: 1011580k/1048384k available (5625k kernel code, 36352k reserved, 2774k data, 712k init, 139080k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1835000 - 0xc18e7000 ( 712 kB) [ 0.000000] .data : 0xc157e704 - 0xc1834300 (2774 kB) [ 0.000000] .text : 0xc1000000 - 0xc157e704 (5625 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1594.861 MHz processor. [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.72 BogoMIPS (lpj=6379444) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008040] Security Framework initialized [ 0.008069] AppArmor: AppArmor initialized [ 0.008071] Yama: becoming mindful. [ 0.008150] Mount-cache hash table entries: 512 [ 0.008334] Initializing cgroup subsys cpuacct [ 0.008342] Initializing cgroup subsys memory [ 0.008355] Initializing cgroup subsys devices [ 0.008358] Initializing cgroup subsys freezer [ 0.008361] Initializing cgroup subsys blkio [ 0.008372] Initializing cgroup subsys perf_event [ 0.008403] Disabled fast string operations [ 0.008412] mce: CPU supports 5 MCE banks [ 0.008695] SMP alternatives: switching to UP code [ 0.018624] Freeing SMP alternatives: 24k freed [ 0.018635] ACPI: Core revision 20110623 [ 0.023096] ACPI: setting ELCR to 0200 (from 0c00) [ 0.024015] ftrace: allocating 25482 entries in 50 pages [ 0.028090] weird, boot CPU (#0) not listed by the BIOS. [ 0.028095] SMP motherboard not detected. [ 0.028097] Local APIC not detected. Using dummy APIC emulation. [ 0.028100] SMP disabled [ 0.028103] Performance Events: [ 0.028106] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.028109] no hardware sampling interrupt available. [ 0.028114] p6 PMU driver. [ 0.028119] ... version: 0 [ 0.028121] ... bit width: 32 [ 0.028123] ... generic registers: 2 [ 0.028126] ... value mask: 00000000ffffffff [ 0.028128] ... max period: 000000007fffffff [ 0.028131] ... fixed-purpose events: 0 [ 0.028133] ... event mask: 0000000000000003 [ 0.028360] NMI watchdog disabled (cpu0): not supported (no LAPIC?) [ 0.028382] Brought up 1 CPUs [ 0.028386] Total of 1 processors activated (3189.72 BogoMIPS). [ 0.028596] devtmpfs: initialized [ 0.028775] EVM: security.selinux [ 0.028778] EVM: security.SMACK64 [ 0.028780] EVM: security.capability [ 0.028818] PM: Registering ACPI NVS region at 3fff0c00 (46080 bytes) [ 0.030470] print_constraints: dummy: [ 0.030502] RTC time: 0:08:48, date: 03/03/13 [ 0.030560] NET: Registered protocol family 16 [ 0.030737] EISA bus registered [ 0.030788] ACPI: bus type pci registered [ 0.033004] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5 [ 0.033008] PCI: Using configuration type 1 for base access [ 0.034783] bio: create slab at 0 [ 0.034906] ACPI: Added _OSI(Module Device) [ 0.034910] ACPI: Added _OSI(Processor Device) [ 0.034913] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.034916] ACPI: Added _OSI(Processor Aggregator Device) [ 0.036350] ACPI: EC: Look up EC in DSDT [ 0.056096] ACPI: Interpreter enabled [ 0.056114] ACPI: (supports S0 S3 S4 S5) [ 0.056137] ACPI: Using PIC for interrupt routing [ 0.057712] ACPI: Power Resource [C16E] (on) [ 0.058280] ACPI: Power Resource [C13E] (on) [ 0.058993] ACPI: Power Resource [C185] (on) [ 0.060339] ACPI: Power Resource [C18C] (on) [ 0.060902] ACPI: Power Resource [C196] (on) [ 0.061495] ACPI: Power Resource [C0E7] (on) [ 0.064695] ACPI: Power Resource [C202] (off) [ 0.064774] ACPI: Power Resource [C203] (off) [ 0.064850] ACPI: Power Resource [C204] (off) [ 0.064922] ACPI: Power Resource [C205] (off) [ 0.065556] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.065764] ACPI: No dock devices found. [ 0.065767] HEST: Table not found. [ 0.065775] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.070283] ACPI: PCI Root Bridge [C045] (domain 0000 [bus 00-ff]) [ 0.079349] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.079354] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.079358] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.079362] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfec00fff] (ignored) [ 0.079366] pci_root PNP0A03:00: host bridge window [mem 0xfec02000-0xffffffff] (ignored) [ 0.079370] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.079387] pci 0000:00:00.0: [8086:3340] type 0 class 0x000600 [ 0.079398] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xbfffffff pref] [ 0.079448] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604 [ 0.079510] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03 [ 0.079556] pci 0000:00:1d.0: reg 20: [io 0x38c0-0x38df] [ 0.079594] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03 [ 0.079640] pci 0000:00:1d.1: reg 20: [io 0x38e0-0x38ff] [ 0.079677] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03 [ 0.079724] pci 0000:00:1d.2: reg 20: [io 0x3c00-0x3c1f] [ 0.079772] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03 [ 0.079796] pci 0000:00:1d.7: reg 10: [mem 0xa0000000-0xa00003ff] [ 0.079893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.079899] pci 0000:00:1d.7: PME# disabled [ 0.079920] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.079967] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601 [ 0.080042] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.080051] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.080058] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH4 GPIO [ 0.080078] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101 [ 0.080094] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.080105] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.080116] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.080127] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.080138] pci 0000:00:1f.1: reg 20: [io 0x3c20-0x3c2f] [ 0.080150] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.080182] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05 [ 0.080228] pci 0000:00:1f.3: reg 20: [io 0x1200-0x121f] [ 0.080269] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401 [ 0.080286] pci 0000:00:1f.5: reg 10: [io 0x3000-0x30ff] [ 0.080297] pci 0000:00:1f.5: reg 14: [io 0x3880-0x38bf] [ 0.080307] pci 0000:00:1f.5: reg 18: [mem 0xa0100000-0xa01001ff] [ 0.080318] pci 0000:00:1f.5: reg 1c: [mem 0xa0180000-0xa01800ff] [ 0.080366] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.080371] pci 0000:00:1f.5: PME# disabled [ 0.080389] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703 [ 0.080406] pci 0000:00:1f.6: reg 10: [io 0x3400-0x34ff] [ 0.080416] pci 0000:00:1f.6: reg 14: [io 0x3800-0x387f] [ 0.080478] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.080484] pci 0000:00:1f.6: PME# disabled [ 0.080511] pci 0000:01:00.0: [1002:4e50] type 0 class 0x000300 [ 0.080528] pci 0000:01:00.0: reg 10: [mem 0x98000000-0x9fffffff pref] [ 0.080537] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.080546] pci 0000:01:00.0: reg 18: [mem 0x90300000-0x9030ffff] [ 0.080572] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.080602] pci 0000:01:00.0: supports D1 D2 [ 0.080638] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.080643] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.080648] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff] [ 0.080653] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref] [ 0.080683] pci 0000:02:04.0: [168c:0013] type 0 class 0x000200 [ 0.080702] pci 0000:02:04.0: reg 10: [mem 0x90080000-0x9008ffff] [ 0.080794] pci 0000:02:06.0: [1217:7223] type 2 class 0x000607 [ 0.080813] pci 0000:02:06.0: reg 10: [mem 0x90100000-0x90100fff] [ 0.080842] pci 0000:02:06.0: supports D1 D2 [ 0.080845] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080851] pci 0000:02:06.0: PME# disabled [ 0.080870] pci 0000:02:06.1: [1217:7223] type 2 class 0x000607 [ 0.080888] pci 0000:02:06.1: reg 10: [mem 0x90180000-0x90180fff] [ 0.080918] pci 0000:02:06.1: supports D1 D2 [ 0.080921] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080927] pci 0000:02:06.1: PME# disabled [ 0.080946] pci 0000:02:06.2: [1217:7110] type 0 class 0x000880 [ 0.080964] pci 0000:02:06.2: reg 10: [mem 0x90200000-0x90200fff] [ 0.081039] pci 0000:02:06.2: supports D1 D2 [ 0.081042] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081047] pci 0000:02:06.2: PME# disabled [ 0.081066] pci 0000:02:06.3: [1217:7223] type 2 class 0x000607 [ 0.081085] pci 0000:02:06.3: reg 10: [mem 0x90280000-0x90280fff] [ 0.081114] pci 0000:02:06.3: supports D1 D2 [ 0.081117] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081123] pci 0000:02:06.3: PME# disabled [ 0.081160] pci 0000:02:0e.0: [14e4:165e] type 0 class 0x000200 [ 0.081189] pci 0000:02:0e.0: reg 10: [mem 0x90000000-0x9000ffff 64bit] [ 0.081233] pci 0000:02:0e.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.081285] pci 0000:02:0e.0: PME# supported from D3hot D3cold [ 0.081290] pci 0000:02:0e.0: PME# disabled [ 0.081320] pci 0000:00:1e.0: PCI bridge to [bus 02-05] (subtractive decode) [ 0.081329] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x902fffff] [ 0.081335] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.081339] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.081414] pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:02 [bus 02-05] [ 0.081447] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:02 [bus 02-05] [ 0.081462] pci_bus 0000:00: on NUMA node 0 [ 0.081466] ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT] [ 0.081586] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C046._PRT] [ 0.081633] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C057._PRT] [ 0.081795] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.089476] ACPI: PCI Interrupt Link [C0C2] (IRQs *10 11) [ 0.089593] ACPI: PCI Interrupt Link [C0C3] (IRQs 10 *11) [ 0.089706] ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11) [ 0.089818] ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11) [ 0.089930] ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11) [ 0.090042] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 *11) [ 0.090144] ACPI: PCI Interrupt Link [C0C8] (IRQs 10 11) *0, disabled. [ 0.090257] ACPI: PCI Interrupt Link [C0C9] (IRQs *10 11) [ 0.090426] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.090433] vgaarb: loaded [ 0.090435] vgaarb: bridge control possible 0000:01:00.0 [ 0.090612] i2c-core: driver [aat2870] using legacy suspend method [ 0.090615] i2c-core: driver [aat2870] using legacy resume method [ 0.090756] SCSI subsystem initialized [ 0.090820] libata version 3.00 loaded. [ 0.090886] usbcore: registered new interface driver usbfs [ 0.090904] usbcore: registered new interface driver hub [ 0.090939] usbcore: registered new device driver usb [ 0.091075] PCI: Using ACPI for IRQ routing [ 0.091112] PCI: pci_cache_line_size set to 64 bytes [ 0.091191] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.091195] reserve RAM buffer: 000000003ffd0000 - 000000003fffffff [ 0.091352] NetLabel: Initializing [ 0.091355] NetLabel: domain hash size = 128 [ 0.091357] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.091374] NetLabel: unlabeled traffic allowed by default [ 0.091456] Switching to clocksource pit [ 0.099794] AppArmor: AppArmor Filesystem Enabled [ 0.099855] pnp: PnP ACPI init [ 0.099886] ACPI: bus type pnp registered [ 0.100062] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.100067] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.100071] pnp 00:00: [mem 0x00100000-0x3fffffff] [ 0.100164] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.100169] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.100174] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved [ 0.100180] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.104770] pnp 00:01: [bus 00-ff] [ 0.104775] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.104778] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.104782] pnp 00:01: [io 0x0d00-0xffff window] [ 0.104785] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.104789] pnp 00:01: [mem 0x40000000-0xfec00fff window] [ 0.104793] pnp 00:01: [mem 0xfec02000-0xffffffff window] [ 0.104797] pnp 00:01: [mem 0x000d0000-0x000dffff window] [ 0.104907] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.105521] pnp 00:02: [io 0x03f8-0x03ff] [ 0.105528] pnp 00:02: [irq 4] [ 0.105613] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.106188] pnp 00:03: [io 0x03f0-0x03f5] [ 0.106192] pnp 00:03: [io 0x03f7] [ 0.106195] pnp 00:03: [irq 6] [ 0.106198] pnp 00:03: [dma 2] [ 0.106262] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.106989] pnp 00:04: [io 0x03e8-0x03ef] [ 0.106992] pnp 00:04: [io 0x07d0-0x07d7] [ 0.106996] pnp 00:04: [irq 3] [ 0.106999] pnp 00:04: [dma 3] [ 0.107112] pnp 00:04: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active) [ 0.107728] pnp 00:05: [io 0x0378-0x037f] [ 0.107732] pnp 00:05: [io 0x0778-0x077a] [ 0.107735] pnp 00:05: [irq 7] [ 0.107738] pnp 00:05: [dma 1] [ 0.107880] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.107895] pnp 00:06: [io 0x00f0-0x00ff] [ 0.107898] pnp 00:06: [irq 13] [ 0.107950] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.107966] pnp 00:07: [io 0x0000-0x000f] [ 0.107970] pnp 00:07: [io 0x0080-0x008f] [ 0.107973] pnp 00:07: [io 0x00c0-0x00df] [ 0.107976] pnp 00:07: [dma 4] [ 0.108022] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.108034] pnp 00:08: [io 0x0061] [ 0.108081] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.108095] pnp 00:09: [io 0x0070-0x0071] [ 0.108098] pnp 00:09: [io 0x0072-0x0073] [ 0.108101] pnp 00:09: [irq 8] [ 0.108153] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.108166] pnp 00:0a: [io 0x0060] [ 0.108169] pnp 00:0a: [io 0x0064] [ 0.108173] pnp 00:0a: [irq 1] [ 0.108218] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.108231] pnp 00:0b: [irq 12] [ 0.108280] pnp 00:0b: Plug and Play ACPI device, IDs SYN0108 SYN0100 SYN0002 PNP0f13 (active) [ 0.108407] pnp 00:0c: [io 0x0010-0x001f] [ 0.108411] pnp 00:0c: [io 0x0024-0x003f] [ 0.108414] pnp 00:0c: [io 0x004e-0x004f] [ 0.108417] pnp 00:0c: [io 0x0050-0x0053] [ 0.108420] pnp 00:0c: [io 0x0068-0x006f] [ 0.108423] pnp 00:0c: [io 0x0074-0x0077] [ 0.108426] pnp 00:0c: [io 0x0090-0x009f] [ 0.108429] pnp 00:0c: [io 0x00a4-0x00bd] [ 0.108439] pnp 00:0c: [io 0x0140-0x014f] [ 0.108442] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.108445] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.108531] system 00:0c: [io 0x0140-0x014f] has been reserved [ 0.108563] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.108568] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.108573] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108961] pnp 00:0d: [io 0x04d0-0x04d1] [ 0.108965] pnp 00:0d: [io 0x1000-0x107f] [ 0.108968] pnp 00:0d: [io 0x1100-0x113f] [ 0.108971] pnp 00:0d: [io 0x1200-0x121f] [ 0.108975] pnp 00:0d: [mem 0xfec00000-0xfec000ff] [ 0.109059] system 00:0d: [io 0x04d0-0x04d1] has been reserved [ 0.109063] system 00:0d: [io 0x1000-0x107f] has been reserved [ 0.109067] system 00:0d: [io 0x1100-0x113f] has been reserved [ 0.109071] system 00:0d: [io 0x1200-0x121f] has been reserved [ 0.109076] system 00:0d: [mem 0xfec00000-0xfec000ff] has been reserved [ 0.109080] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.109336] pnp 00:0e: [mem 0xfec01000-0xfec01fff] [ 0.109427] system 00:0e: [mem 0xfec01000-0xfec01fff] has been reserved [ 0.109432] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.109450] pnp: PnP ACPI: found 15 devices [ 0.109452] ACPI: ACPI bus type pnp unregistered [ 0.109459] PnPBIOS: Disabled by ACPI PNP [ 0.146840] Switching to clocksource acpi_pm [ 0.146879] PCI: max bus depth: 2 pci_try_num: 3 [ 0.146918] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x41ffffff pref] [ 0.146923] pci 0000:00:1f.1: BAR 5: assigned [mem 0x42000000-0x420003ff] [ 0.146930] pci 0000:00:1f.1: BAR 5: set to [mem 0x42000000-0x420003ff] (PCI address [0x42000000-0x420003ff]) [ 0.146936] pci 0000:00:1e.0: BAR 15: reassigned [mem 0x44000000-0x51ffffff pref] [ 0.146942] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.146947] pci 0000:01:00.0: BAR 6: assigned [mem 0x90320000-0x9033ffff pref] [ 0.146951] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.146955] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.146961] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff] [ 0.146966] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref] [ 0.146976] pci 0000:02:0e.0: BAR 6: assigned [mem 0x44000000-0x4400ffff pref] [ 0.146981] pci 0000:02:06.3: BAR 16: assigned [mem 0x54000000-0x57ffffff] [ 0.146986] pci 0000:02:06.3: BAR 15: assigned [mem 0x48000000-0x4bffffff pref] [ 0.146990] pci 0000:02:06.3: BAR 14: assigned [io 0x4000-0x40ff] [ 0.146994] pci 0000:02:06.3: BAR 13: assigned [io 0x4400-0x44ff] [ 0.146999] pci 0000:02:06.1: BAR 16: assigned [mem 0x58000000-0x5bffffff] [ 0.147003] pci 0000:02:06.1: BAR 15: assigned [mem 0x4c000000-0x4fffffff pref] [ 0.147007] pci 0000:02:06.1: BAR 14: assigned [io 0x4800-0x48ff] [ 0.147011] pci 0000:02:06.1: BAR 13: assigned [io 0x4c00-0x4cff] [ 0.147016] pci 0000:02:06.0: BAR 16: assigned [mem 0x5c000000-0x5fffffff] [ 0.147022] pci 0000:02:06.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref] [ 0.147028] pci 0000:02:06.0: BAR 14: assigned [io 0x1400-0x14ff] [ 0.147032] pci 0000:02:06.0: BAR 13: assigned [io 0x1800-0x18ff] [ 0.147036] pci 0000:02:06.0: CardBus bridge to [bus 03-04] [ 0.147040] pci 0000:02:06.0: bridge window [io 0x1800-0x18ff] [ 0.147046] pci 0000:02:06.0: bridge window [io 0x1400-0x14ff] [ 0.147051] pci 0000:02:06.0: bridge window [mem 0x60000000-0x63ffffff pref] [ 0.147057] pci 0000:02:06.0: bridge window [mem 0x5c000000-0x5fffffff] [ 0.147063] pci 0000:02:06.1: CardBus bridge to [bus 05-08] [ 0.147066] pci 0000:02:06.1: bridge window [io 0x4c00-0x4cff] [ 0.147072] pci 0000:02:06.1: bridge window [io 0x4800-0x48ff] [ 0.147078] pci 0000:02:06.1: bridge window [mem 0x4c000000-0x4fffffff pref] [ 0.147084] pci 0000:02:06.1: bridge window [mem 0x58000000-0x5bffffff] [ 0.147089] pci 0000:02:06.3: CardBus bridge to [bus 09-0c] [ 0.147092] pci 0000:02:06.3: bridge window [io 0x4400-0x44ff] [ 0.147098] pci 0000:02:06.3: bridge window [io 0x4000-0x40ff] [ 0.147104] pci 0000:02:06.3: bridge window [mem 0x48000000-0x4bffffff pref] [ 0.147110] pci 0000:02:06.3: bridge window [mem 0x54000000-0x57ffffff] [ 0.147115] pci 0000:00:1e.0: PCI bridge to [bus 02-05] [ 0.147120] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 0.147127] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x902fffff] [ 0.147133] pci 0000:00:1e.0: bridge window [mem 0x44000000-0x51ffffff pref] [ 0.147153] pci 0000:00:1e.0: setting latency timer to 64 [ 0.147339] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10 [ 0.147343] PCI: setting IRQ 10 as level-triggered [ 0.147349] pci 0000:02:06.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.147362] pci 0000:02:06.1: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.147372] pci 0000:02:06.3: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.147379] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.147383] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.147387] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.147391] pci_bus 0000:01: resource 1 [mem 0x90300000-0x903fffff] [ 0.147395] pci_bus 0000:01: resource 2 [mem 0x98000000-0x9fffffff pref] [ 0.147399] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.147403] pci_bus 0000:02: resource 1 [mem 0x90000000-0x902fffff] [ 0.147407] pci_bus 0000:02: resource 2 [mem 0x44000000-0x51ffffff pref] [ 0.147410] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.147414] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.147418] pci_bus 0000:03: resource 0 [io 0x1800-0x18ff] [ 0.147422] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] [ 0.147425] pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref] [ 0.147429] pci_bus 0000:03: resource 3 [mem 0x5c000000-0x5fffffff] [ 0.147433] pci_bus 0000:05: resource 0 [io 0x4c00-0x4cff] [ 0.147437] pci_bus 0000:05: resource 1 [io 0x4800-0x48ff] [ 0.147441] pci_bus 0000:05: resource 2 [mem 0x4c000000-0x4fffffff pref] [ 0.147444] pci_bus 0000:05: resource 3 [mem 0x58000000-0x5bffffff] [ 0.147448] pci_bus 0000:09: resource 0 [io 0x4400-0x44ff] [ 0.147452] pci_bus 0000:09: resource 1 [io 0x4000-0x40ff] [ 0.147455] pci_bus 0000:09: resource 2 [mem 0x48000000-0x4bffffff pref] [ 0.147459] pci_bus 0000:09: resource 3 [mem 0x54000000-0x57ffffff] [ 0.147533] NET: Registered protocol family 2 [ 0.147631] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.147986] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.149534] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.150488] TCP: Hash tables configured (established 131072 bind 65536) [ 0.150493] TCP reno registered [ 0.150501] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.150535] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.150744] NET: Registered protocol family 1 [ 0.151027] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10 [ 0.151037] pci 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10 [ 0.151057] pci 0000:00:1d.0: PCI INT A disabled [ 0.151215] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10 [ 0.151220] pci 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.151238] pci 0000:00:1d.1: PCI INT B disabled [ 0.151250] pci 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.151267] pci 0000:00:1d.2: PCI INT C disabled [ 0.151423] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 10 [ 0.151427] pci 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 10 (level, low) -> IRQ 10 [ 0.151463] pci 0000:00:1d.7: PCI INT D disabled [ 0.151488] pci 0000:01:00.0: Boot video device [ 0.151511] PCI: CLS 64 bytes, default 64 [ 0.152143] audit: initializing netlink socket (disabled) [ 0.152161] type=2000 audit(1362269328.146:1): initialized [ 0.183045] Trying to unpack rootfs image as initramfs... [ 0.220657] highmem bounce pool size: 64 pages [ 0.220667] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.228463] VFS: Disk quotas dquot_6.5.2 [ 0.228582] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.229507] fuse init (API version 7.17) [ 0.229651] msgmni has been set to 1704 [ 0.244365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.244414] io scheduler noop registered [ 0.244418] io scheduler deadline registered [ 0.244430] io scheduler cfq registered (default) [ 0.244674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.244712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.247548] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.247675] ACPI: AC Adapter [C135] (on-line) [ 0.247789] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.247799] ACPI: Sleep Button [C13A] [ 0.247872] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.247914] ACPI: Lid Switch [C139] [ 0.247983] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.247988] ACPI: Power Button [PWRF] [ 0.248142] ACPI: Fan [C206] (off) [ 0.248210] ACPI: Fan [C207] (off) [ 0.248285] ACPI: Fan [C208] (off) [ 0.248348] ACPI: Fan [C209] (off) [ 0.248442] Marking TSC unstable due to TSC halts in idle [ 0.248453] ACPI: acpi_idle registered with cpuidle [ 0.272655] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.272660] ACPI: Thermal Zone [TZ1] (60 C) [ 0.287652] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.287656] ACPI: Thermal Zone [TZ2] (48 C) [ 0.303102] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.303107] ACPI: Thermal Zone [TZ3] (16 C) [ 0.303183] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.303200] ACPI: Battery Slot [C138] (battery absent) [ 0.303210] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.303219] ACPI: Battery Slot [C137] (battery absent) [ 0.303265] ERST: Table is not found! [ 0.303267] GHES: HEST is not enabled! [ 0.303484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.323851] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.328300] ACPI: Battery Slot [C138] (battery absent) [ 0.328395] ACPI: Battery Slot [C137] (battery absent) [ 0.328432] isapnp: Scanning for PnP cards... [ 0.412904] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 0.458445] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.520949] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11 [ 0.520955] PCI: setting IRQ 11 as level-triggered [ 0.520963] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11 [ 0.520994] serial 0000:00:1f.6: PCI INT B disabled [ 0.524234] Linux agpgart interface v0.103 [ 0.524393] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 0.552248] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 0.556837] brd: module loaded [ 0.557994] loop: module loaded [ 0.558245] ata_piix 0000:00:1f.1: version 2.13 [ 0.558264] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.558277] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.558335] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.564058] scsi0 : ata_piix [ 0.564228] scsi1 : ata_piix [ 0.564932] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14 [ 0.564937] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15 [ 0.565580] Fixed MDIO Bus: probed [ 0.565611] tun: Universal TUN/TAP device driver, 1.6 [ 0.565614] tun: (C) 1999-2004 Max Krasnyansky [ 0.565696] PPP generic driver version 2.4.2 [ 0.565854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.565885] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 10 (level, low) -> IRQ 10 [ 0.565913] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.565918] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.565977] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.566021] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.569913] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.576206] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000 [ 0.627927] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.708578] hub 1-0:1.0: USB hub found [ 0.708589] hub 1-0:1.0: 6 ports detected [ 0.708725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.708755] uhci_hcd: USB Universal Host Controller Interface driver [ 0.708816] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10 [ 0.708835] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.708840] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.708940] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.708973] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0 [ 0.709185] hub 2-0:1.0: USB hub found [ 0.709192] hub 2-0:1.0: 2 ports detected [ 0.709281] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.709292] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.709297] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.709355] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.709379] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0 [ 0.709558] hub 3-0:1.0: USB hub found [ 0.709563] hub 3-0:1.0: 2 ports detected [ 0.709649] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10 [ 0.709659] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.709663] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.709725] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.709749] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00 [ 0.709943] hub 4-0:1.0: USB hub found [ 0.709948] hub 4-0:1.0: 2 ports detected [ 0.710105] usbcore: registered new interface driver libusual [ 0.710196] i8042: PNP: PS/2 Controller [PNP0303:C193,PNP0f13:C194] at 0x60,0x64 irq 1,12 [ 0.711870] i8042: Detected active multiplexing controller, rev 1.1 [ 0.716466] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.716481] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.716537] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.716583] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.716621] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.716818] mousedev: PS/2 mouse device common for all mice [ 0.717074] rtc_cmos 00:09: RTC can wake from S4 [ 0.717203] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.717224] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.717356] device-mapper: uevent: version 1.0.3 [ 0.717465] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.717516] EISA: Probing bus 0 at eisa.0 [ 0.717527] Cannot allocate resource for EISA slot 1 [ 0.717530] Cannot allocate resource for EISA slot 2 [ 0.717533] Cannot allocate resource for EISA slot 3 [ 0.717536] Cannot allocate resource for EISA slot 4 [ 0.717557] EISA: Detected 0 cards. [ 0.717573] cpufreq-nforce2: No nForce2 chipset. [ 0.717631] cpuidle: using governor ladder [ 0.717710] cpuidle: using governor menu [ 0.717713] EFI Variables Facility v0.08 2004-May-17 [ 0.718076] TCP cubic registered [ 0.718266] NET: Registered protocol family 10 [ 0.719030] NET: Registered protocol family 17 [ 0.719037] Registering the dns_resolver key type [ 0.719066] Using IPI No-Shortcut mode [ 0.719206] PM: Hibernation image not present or could not be loaded. [ 0.719223] registered taskstats version 1 [ 0.728091] ata1.00: ATA-6: TOSHIBA MK3025GAS, KA300A, max UDMA/100 [ 0.728097] ata1.00: 58605120 sectors, multi 16: LBA [ 0.728195] ata2.00: ATAPI: DW-224E-B, A.6F, max MWDMA2 [ 0.772409] ata1.00: configured for UDMA/100 [ 0.856390] ata2.00: configured for MWDMA2 [ 0.860106] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.955840] isapnp: No Plug & Play device found [ 0.956098] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3025GA KA30 PQ: 0 ANSI: 5 [ 0.956373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.956608] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 0.956679] sd 0:0:0:0: [sda] Write Protect is off [ 0.956684] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.956714] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.994359] scsi 1:0:0:0: CD-ROM TEAC DW-224E-B A.6F PQ: 0 ANSI: 5 [ 0.997426] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.997432] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.997645] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.997839] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.043054] sda: sda1 sda2 < sda5 > [ 1.043667] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.132824] Freeing initrd memory: 13148k freed [ 1.161657] Magic number: 5:266:101 [ 1.161863] rtc_cmos 00:09: setting system clock to 2013-03-03 00:08:49 UTC (1362269329) [ 1.163519] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.163523] EDD information not available. [ 1.163762] Freeing unused kernel memory: 712k freed [ 1.164177] Write protecting the kernel text: 5628k [ 1.164231] Write protecting the kernel read-only data: 2328k [ 1.184657] udevd[85]: starting version 175 [ 1.410727] Floppy drive(s): fd0 is 1.44M [ 1.419919] tg3.c:v3.121 (November 2, 2011) [ 1.420206] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11 [ 1.420215] tg3 0000:02:0e.0: PCI INT A -> Link[C0C6] -> GSI 11 (level, low) -> IRQ 11 [ 1.427849] FDC 0 is a post-1991 82077 [ 1.533158] tg3 0000:02:0e.0: eth0: Tigon3 [partno(BMC5705mA3) rev 3003] (PCI:33MHz:32-bit) MAC address 00:12:79:57:5e:1c [ 1.533167] tg3 0000:02:0e.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) [ 1.533173] tg3 0000:02:0e.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.533178] tg3 0000:02:0e.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.657410] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.657415] EXT4-fs (sda1): write access will be enabled during recovery [ 4.476512] EXT4-fs (sda1): recovery complete [ 4.511144] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 29.304218] Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k [ 29.313578] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.356868] udevd[319]: starting version 175 [ 29.411130] lp: driver loaded but no devices found [ 29.568961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.629185] wmi: Mapper loaded [ 29.691178] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 30.038164] Bluetooth: Core ver 2.16 [ 30.038187] NET: Registered protocol family 31 [ 30.038190] Bluetooth: HCI device and connection manager initialized [ 30.038194] Bluetooth: HCI socket layer initialized [ 30.038197] Bluetooth: L2CAP socket layer initialized [ 30.038204] Bluetooth: SCO socket layer initialized [ 30.054766] ppdev: user-space parallel port driver [ 30.057155] parport_pc 00:05: reported by Plug and Play ACPI [ 30.057205] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 30.080107] Bluetooth: RFCOMM TTY layer initialized [ 30.080115] Bluetooth: RFCOMM socket layer initialized [ 30.080118] Bluetooth: RFCOMM ver 1.11 [ 30.096077] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4 [ 30.096245] ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no) [ 30.123007] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.123013] Bluetooth: BNEP filters: protocol multicast [ 30.156333] lp0: using parport0 (interrupt-driven). [ 30.209464] type=1400 audit(1362269358.545:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=645 comm="apparmor_parser" [ 30.210313] type=1400 audit(1362269358.545:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=645 comm="apparmor_parser" [ 30.319817] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0890] [ 30.319839] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off' [ 30.320001] intel_rng: FWH not detected [ 30.320670] [drm] Initialized drm 1.1.0 20060810 [ 30.408282] irda_init() [ 30.408305] NET: Registered protocol family 23 [ 30.452612] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 10 [ 30.452619] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 30.452630] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 30.452635] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff [ 30.463098] cfg80211: Calling CRDA to update world regulatory domain [ 30.463402] Detected unconfigured HP nc6000 family SMSC IrDA chip, pre-configuring device. [ 30.463406] Setting up Intel 82801 controller and SMSC device [ 30.463424] Detected Chip id: 0x5a, setting up registers... [ 30.463562] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227 [ 30.463579] smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e [ 30.463595] SMsC IrDA Controller found [ 30.463597] IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5 [ 30.463659] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 30.463672] No transceiver found. Defaulting to Fast pin select [ 30.499656] 0x4800-0x48ff [ 30.502307] IrDA: Registered device irda0 [ 30.515187] 0x4c00-0x4cff [ 30.527982] type=1400 audit(1362269358.861:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=708 comm="apparmor_parser" [ 30.538342] type=1400 audit(1362269358.873:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser" [ 30.538742] type=1400 audit(1362269358.873:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser" [ 30.550122] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.591689] nf_conntrack version 0.5.0 (16022 buckets, 64088 max) [ 30.650572] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.676397] [ 30.676406] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 30.676413] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x902fffff: excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 30.676437] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x44000000-0x51ffffff pref] [ 30.676442] pcmcia_socket pcmcia_socket0: cs: memory probe 0x44000000-0x51ffffff: excluding 0x44000000-0x51ffffff [ 30.688134] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:0890] [ 30.816686] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 10 [ 30.816692] yenta_cardbus 0000:02:06.1: Socket status: 30000006 [ 30.816698] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #05 to #08 [ 30.816711] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 30.816716] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff [ 30.858523] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 30.858530] pcmcia_socket pcmcia_socket1: cs: memory probe 0x90000000-0x902fffff: excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 30.858555] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x44000000-0x51ffffff pref] [ 30.858559] pcmcia_socket pcmcia_socket1: cs: memory probe 0x44000000-0x51ffffff: excluding 0x44000000-0x51ffffff [ 30.866194] [drm] radeon defaulting to kernel modesetting. [ 30.866200] [drm] radeon kernel modesetting enabled. [ 30.866299] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10 [ 30.876324] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x103C:0x0890). [ 30.876350] [drm] register mmio base: 0x90300000 [ 30.876353] [drm] register mmio size: 65536 [ 30.876566] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 30.876580] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 30.876620] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 30.876662] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF [ 30.876668] [drm] Generation 2 PCI interface, using max accessible memory [ 30.876674] radeon 0000:01:00.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used) [ 30.876687] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 30.876690] [drm] Driver supports precise vblank timestamp query. [ 30.876704] [drm] radeon: irq initialized. [ 30.887123] [drm] Detected VRAM RAM=128M, BAR=128M [ 30.887128] [drm] RAM width 64bits DDR [ 30.893138] [TTM] Zone kernel: Available graphics memory: 443192 kiB. [ 30.893142] [TTM] Zone highmem: Available graphics memory: 512732 kiB. [ 30.893145] [TTM] Initializing pool allocator. [ 30.893186] [drm] radeon: 32M of VRAM memory ready [ 30.893189] [drm] radeon: 256M of GTT memory ready. [ 30.893241] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 30.894545] radeon 0000:01:00.0: WB disabled [ 30.977675] [drm] Loading R300 Microcode [ 30.979696] ACPI: PCI Interrupt Link [C0C7] enabled at IRQ 11 [ 30.979704] ath5k 0000:02:04.0: PCI INT A -> Link[C0C7] -> GSI 11 (level, low) -> IRQ 11 [ 30.979772] ath5k 0000:02:04.0: registered as 'phy0' [ 31.307272] ath: EEPROM regdomain: 0x60 [ 31.307276] ath: EEPROM indicates we should expect a direct regpair map [ 31.307281] ath: Country alpha2 being used: 00 [ 31.307283] ath: Regpair used: 0x60 [ 31.381276] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 31.381283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381287] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 31.381291] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381295] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 31.381299] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381303] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 31.381307] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381311] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 31.381315] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381318] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 31.381323] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381326] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 31.381330] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381334] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 31.381338] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381342] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 31.381346] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381349] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 31.381354] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381357] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 31.381361] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381365] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 31.381369] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381372] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 31.381377] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.381380] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 31.381385] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 31.383549] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 31.413410] init: failsafe main process (817) killed by TERM signal [ 31.430002] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 31.435922] Registered led device: ath5k-phy0::rx [ 31.447689] Registered led device: ath5k-phy0::tx [ 31.447709] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 31.447713] ath5k phy0: RF5111 5GHz radio found (0x17) [ 31.447715] ath5k phy0: RF2111 2GHz radio found (0x23) [ 31.447767] yenta_cardbus 0000:02:06.3: CardBus bridge found [103c:0890] [ 31.515531] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000/0x0 [ 31.515542] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 31.560235] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 31.561526] type=1400 audit(1362269359.897:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=952 comm="apparmor_parser" [ 31.562087] type=1400 audit(1362269359.897:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=952 comm="apparmor_parser" [ 31.574546] type=1400 audit(1362269359.909:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=957 comm="apparmor_parser" [ 31.575102] type=1400 audit(1362269359.909:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=957 comm="apparmor_parser" [ 31.576536] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x0038, PCI irq 10 [ 31.576541] yenta_cardbus 0000:02:06.3: Socket status: 30000006 [ 31.576547] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c [ 31.576622] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 31.576627] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff [ 31.588502] type=1400 audit(1362269359.925:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=958 comm="apparmor_parser" [ 31.589600] 0x4800-0x48ff 0x4c00-0x4cff [ 31.591559] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x90000000-0x902fffff] [ 31.591565] pcmcia_socket pcmcia_socket2: cs: memory probe 0x90000000-0x902fffff: excluding 0x90000000-0x9002ffff 0x90060000-0x9008ffff 0x900f0000-0x9011ffff 0x90180000-0x901affff 0x901e0000-0x9020ffff 0x90270000-0x9029ffff [ 31.591589] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x44000000-0x51ffffff pref] [ 31.591594] pcmcia_socket pcmcia_socket2: cs: memory probe 0x44000000-0x51ffffff: excluding 0x44000000-0x51ffffff [ 31.780277] snd_intel8x0 0000:00:1f.5: power state changed by ACPI to D0 [ 31.780286] snd_intel8x0 0000:00:1f.5: power state changed by ACPI to D0 [ 31.780300] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11 [ 31.780335] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 31.877901] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x130-0x137 0x140-0x14f 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff [ 31.903615] [drm] radeon: ring at 0x00000000B0001000 [ 31.903639] [drm] ring test succeeded in 1 usecs [ 31.903894] [drm] radeon: ib pool ready. [ 31.904076] [drm] ib test succeeded in 0 usecs [ 31.905634] [drm] Panel ID String: LCD [ 31.905638] [drm] Panel Size 1024x768 [ 31.916749] [drm] radeon legacy LVDS backlight initialized [ 31.916824] [drm] No TV DAC info found in BIOS [ 31.916953] [drm] Radeon Display Connectors [ 31.916955] [drm] Connector 0: [ 31.916958] [drm] VGA [ 31.916961] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 31.916964] [drm] Encoders: [ 31.916966] [drm] CRT1: INTERNAL_DAC1 [ 31.916969] [drm] Connector 1: [ 31.916971] [drm] DVI-D [ 31.916973] [drm] HPD1 [ 31.916976] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 31.916978] [drm] Encoders: [ 31.916980] [drm] DFP1: INTERNAL_TMDS1 [ 31.916983] [drm] Connector 2: [ 31.916984] [drm] LVDS [ 31.916988] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 31.916990] [drm] Encoders: [ 31.916992] [drm] LCD1: INTERNAL_LVDS [ 31.916994] [drm] Connector 3: [ 31.916996] [drm] S-video [ 31.916998] [drm] Encoders: [ 31.917000] [drm] TV1: INTERNAL_DAC2 [ 31.917022] [drm] radeon: power management initialized [ 31.951632] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 31.951639] cfg80211: World regulatory domain updated: [ 31.951642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.951646] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.951650] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.951654] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.951658] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.951662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.967608] 0x370-0x37f [ 31.967722] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: [ 31.975314] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x3e8-0x3ff 0x4d0-0x4d7 [ 31.984581] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 31.985208] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 31.985903] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 31.985940] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa01fffff [ 31.985979] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 31.986013] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 32.020997] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: excluding 0x130-0x137 0x140-0x14f 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f [ 32.022714] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x130-0x137 0x140-0x14f 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f [ 32.027143] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7 [ 32.027862] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 32.231629] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: excluding 0x3e8-0x3ff 0x4d0-0x4d7 [ 32.254393] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: [ 32.261175] init: alsa-restore main process (1074) terminated with status 19 [ 32.264852] clean. [ 32.264915] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 32.264954] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa01fffff [ 32.264994] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 32.265029] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 32.356587] clean. [ 32.356648] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 32.357346] pcmcia_socket pcmcia_socket2: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 32.357385] pcmcia_socket pcmcia_socket2: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa01fffff [ 32.357427] pcmcia_socket pcmcia_socket2: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 32.357462] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 32.468461] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.469299] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.817815] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.819893] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.056110] intel8x0_measure_ac97_clock: measured 58982 usecs (2841 samples) [ 33.056115] intel8x0: clocking to 48000 [ 33.120054] [drm] fb mappable at 0x98040000 [ 33.120058] [drm] vram apper at 0x98000000 [ 33.120061] [drm] size 786432 [ 33.120063] [drm] fb depth is 8 [ 33.120066] [drm] pitch is 1024 [ 33.120349] fbcon: radeondrmfb (fb0) is primary device [ 33.121215] Console: switching to colour frame buffer device 128x48 [ 33.121257] fb0: radeondrmfb frame buffer device [ 33.121260] drm: registered panic notifier [ 33.121273] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [ 33.493811] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 33.493815] vesafb: scrolling: redraw [ 33.493819] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 33.494080] vesafb: framebuffer at 0x98000000, mapped to 0xf8a80000, using 3072k, total 3072k [ 33.495369] fb1: VESA VGA frame buffer device [ 34.275767] init: plymouth-upstart-bridge main process (562) killed by TERM signal [ 35.310396] wlan0: authenticate with 38:72:c0:45:d6:1f (try 1) [ 35.312964] wlan0: authenticated [ 35.313254] wlan0: associate with 38:72:c0:45:d6:1f (try 1) [ 35.319601] wlan0: RX AssocResp from 38:72:c0:45:d6:1f (capab=0x401 status=0 aid=3) [ 35.319606] wlan0: associated [ 35.320464] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.821771] psmouse serio5: hgpk: ID: 10 00 64 [ 39.560393] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 40.585239] IBM TrackPoint firmware: 0x12, buttons: 0/0 [ 41.059854] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input6 [ 46.288033] wlan0: no IPv6 routers present [ 188.287343] end_request: I/O error, dev fd0, sector 0 [ 226.419417] end_request: I/O error, dev fd0, sector 0 [ 226.419426] quiet_error: 48 callbacks suppressed [ 226.419430] Buffer I/O error on device fd0, logical block 0 [ 264.559785] end_request: I/O error, dev fd0, sector 0 [ 264.559803] Buffer I/O error on device fd0, logical block 0 [ 302.671380] end_request: I/O error, dev fd0, sector 0 [ 302.671395] Buffer I/O error on device fd0, logical block 0 [ 340.783401] end_request: I/O error, dev fd0, sector 0 [ 340.783418] Buffer I/O error on device fd0, logical block 0 [ 379.505152] end_request: I/O error, dev fd0, sector 0 [ 379.505162] Buffer I/O error on device fd0, logical block 0