[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff5ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ff60000-0x000000001ff76fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000001ff77000-0x000000001ff78fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000001ff80000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI present. [ 0.000000] DMI: IBM 23739XG/23739XG, BIOS 1RETDPWW (3.21 ) 06/02/2006 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1ff60 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC [ 0.000000] total RAM covered: 511M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x1ff5ffff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fdfffff] page 2M [ 0.000000] [mem 0x1fe00000-0x1ff5ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x1ff5ffff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x1dcb0000-0x1eb0cfff] [ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 1ff6a6bd 0004C (v01 IBM TP-1R 00003210 LTP 00000000) [ 0.000000] ACPI: FACP 1ff6a800 000F4 (v03 IBM TP-1R 00003210 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120320/tbfadt-548) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120320/tbfadt-579) [ 0.000000] ACPI: DSDT 1ff6a9e7 0C4E5 (v01 IBM TP-1R 00003210 MSFT 0100000E) [ 0.000000] ACPI: FACS 1ff78000 00040 [ 0.000000] ACPI: SSDT 1ff6a9b4 00033 (v01 IBM TP-1R 00003210 MSFT 0100000E) [ 0.000000] ACPI: ECDT 1ff76ecc 00052 (v01 IBM TP-1R 00003210 IBM 00000001) [ 0.000000] ACPI: TCPA 1ff76f1e 00032 (v01 IBM TP-1R 00003210 PTL 00000001) [ 0.000000] ACPI: BOOT 1ff76fd8 00028 (v01 IBM TP-1R 00003210 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ff60000 [ 0.000000] low ram: 0 - 1ff60000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x1ff5ffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x1ff5ffff] [ 0.000000] On node 0 totalpages: 130799 [ 0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map dfb5f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125825 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @dfb4d000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129776 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=5117271e-2c96-42fb-ba1c-e008ec1d5bc3 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1047168 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 492280k/523648k available (5956k kernel code, 30916k reserved, 2928k data, 756k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xe0760000 - 0xffbfe000 ( 500 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) [ 0.000000] .init : 0xc18ae000 - 0xc196b000 ( 756 kB) [ 0.000000] .data : 0xc15d1358 - 0xc18ad6c0 (2928 kB) [ 0.000000] .text : 0xc1000000 - 0xc15d1358 (5956 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1794.162 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3588.32 BogoMIPS (lpj=7176648) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004039] Security Framework initialized [ 0.004065] AppArmor: AppArmor initialized [ 0.004067] Yama: becoming mindful. [ 0.004164] Mount-cache hash table entries: 512 [ 0.004502] Initializing cgroup subsys cpuacct [ 0.004507] Initializing cgroup subsys memory [ 0.004522] Initializing cgroup subsys devices [ 0.004525] Initializing cgroup subsys freezer [ 0.004527] Initializing cgroup subsys blkio [ 0.004530] Initializing cgroup subsys perf_event [ 0.004569] Disabled fast string operations [ 0.004576] mce: CPU supports 5 MCE banks [ 0.004939] SMP alternatives: switching to UP code [ 0.019708] Freeing SMP alternatives: 24k freed [ 0.019716] ACPI: Core revision 20120320 [ 0.028020] ACPI: setting ELCR to 0200 (from 0800) [ 0.032012] ftrace: allocating 24585 entries in 49 pages [ 0.044103] weird, boot CPU (#0) not listed by the BIOS. [ 0.044109] SMP motherboard not detected. [ 0.044111] Local APIC not detected. Using dummy APIC emulation. [ 0.044113] SMP disabled [ 0.044116] Performance Events: [ 0.044119] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.044121] no hardware sampling interrupt available. [ 0.044124] p6 PMU driver. [ 0.044128] ... version: 0 [ 0.044129] ... bit width: 32 [ 0.044131] ... generic registers: 2 [ 0.044133] ... value mask: 00000000ffffffff [ 0.044134] ... max period: 000000007fffffff [ 0.044136] ... fixed-purpose events: 0 [ 0.044138] ... event mask: 0000000000000003 [ 0.044368] NMI watchdog: disabled (cpu0): not supported (no LAPIC?) [ 0.044405] Brought up 1 CPUs [ 0.044408] Total of 1 processors activated (3588.32 BogoMIPS). [ 0.044616] devtmpfs: initialized [ 0.044913] EVM: security.selinux [ 0.044915] EVM: security.SMACK64 [ 0.044917] EVM: security.capability [ 0.045024] PM: Registering ACPI NVS region [mem 0x1ff77000-0x1ff78fff] (8192 bytes) [ 0.048782] dummy: [ 0.048819] RTC time: 17:10:58, date: 01/28/13 [ 0.048882] NET: Registered protocol family 16 [ 0.049095] EISA bus registered [ 0.049214] ACPI: bus type pci registered [ 0.049474] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 0.049476] PCI: Using configuration type 1 for base access [ 0.050996] bio: create slab at 0 [ 0.051119] ACPI: Added _OSI(Module Device) [ 0.051122] ACPI: Added _OSI(Processor Device) [ 0.051125] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.051127] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053614] ACPI: EC: EC description table is found, configuring boot EC [ 0.064946] ACPI: Interpreter enabled [ 0.064956] ACPI: (supports S0 S3 S4 S5) [ 0.064982] ACPI: Using PIC for interrupt routing [ 0.068991] ACPI: Power Resource [PUBS] (on) [ 0.072576] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.073101] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.073101] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.073101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.073101] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.073101] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff] (ignored) [ 0.073101] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.073101] pci_root PNP0A03:00: >host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.073101] pci_root PNP0A03:00: >host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.073101] pci_root PNP0A03:00: >host bridge window [mem 0x20000000-0xfebfffff] (ignored) [ 0.073101] PCI: root bus 00: using default resources [ 0.073101] PCI host bridge to bus 0000:00 [ 0.073101] pci_bus 0000:00: >root bus resource [io 0x0000-0xffff] [ 0.073101] pci_bus 0000:00: >root bus resource [mem 0x00000000-0xfffffffff] [ 0.073101] pci 0000:00:00.0: >[8086:3340] type 00 class 0x060000 [ 0.073101] pci 0000:00:00.0: >reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.076025] pci 0000:00:01.0: >[8086:3341] type 01 class 0x060400 [ 0.076089] pci 0000:00:1d.0: >[8086:24c2] type 00 class 0x0c0300 [ 0.076137] pci 0000:00:1d.0: >reg 20: [io 0x1800-0x181f] [ 0.076176] pci 0000:00:1d.1: >[8086:24c4] type 00 class 0x0c0300 [ 0.076223] pci 0000:00:1d.1: >reg 20: [io 0x1820-0x183f] [ 0.076262] pci 0000:00:1d.2: >[8086:24c7] type 00 class 0x0c0300 [ 0.076309] pci 0000:00:1d.2: >reg 20: [io 0x1840-0x185f] [ 0.076361] pci 0000:00:1d.7: >[8086:24cd] type 00 class 0x0c0320 [ 0.076385] pci 0000:00:1d.7: >reg 10: [mem 0xc0000000-0xc00003ff] [ 0.076485] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold [ 0.076508] pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060400 [ 0.076556] pci 0000:00:1f.0: >[8086:24cc] type 00 class 0x060100 [ 0.076628] pci 0000:00:1f.0: >quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.076634] pci 0000:00:1f.0: >quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.076652] pci 0000:00:1f.1: >[8086:24ca] type 00 class 0x01018a [ 0.076668] pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007] [ 0.076679] pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003] [ 0.076690] pci 0000:00:1f.1: >reg 18: [io 0x0000-0x0007] [ 0.076701] pci 0000:00:1f.1: >reg 1c: [io 0x0000-0x0003] [ 0.076713] pci 0000:00:1f.1: >reg 20: [io 0x1860-0x186f] [ 0.076724] pci 0000:00:1f.1: >reg 24: [mem 0x00000000-0x000003ff] [ 0.076757] pci 0000:00:1f.3: >[8086:24c3] type 00 class 0x0c0500 [ 0.076805] pci 0000:00:1f.3: >reg 20: [io 0x1880-0x189f] [ 0.076847] pci 0000:00:1f.5: >[8086:24c5] type 00 class 0x040100 [ 0.076864] pci 0000:00:1f.5: >reg 10: [io 0x1c00-0x1cff] [ 0.076875] pci 0000:00:1f.5: >reg 14: [io 0x18c0-0x18ff] [ 0.076885] pci 0000:00:1f.5: >reg 18: [mem 0xc0000c00-0xc0000dff] [ 0.076896] pci 0000:00:1f.5: >reg 1c: [mem 0xc0000800-0xc00008ff] [ 0.076946] pci 0000:00:1f.5: >PME# supported from D0 D3hot D3cold [ 0.076966] pci 0000:00:1f.6: >[8086:24c6] type 00 class 0x070300 [ 0.076983] pci 0000:00:1f.6: >reg 10: [io 0x2400-0x24ff] [ 0.076993] pci 0000:00:1f.6: >reg 14: [io 0x2000-0x207f] [ 0.077058] pci 0000:00:1f.6: >PME# supported from D0 D3hot D3cold [ 0.077087] pci 0000:01:00.0: >[1002:4e50] type 00 class 0x030000 [ 0.077103] pci 0000:01:00.0: >reg 10: [mem 0xe0000000-0xe7ffffff pref] [ 0.077112] pci 0000:01:00.0: >reg 14: [io 0x3000-0x30ff] [ 0.077121] pci 0000:01:00.0: >reg 18: [mem 0xc0100000-0xc010ffff] [ 0.077148] pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.077180] pci 0000:01:00.0: >supports D1 D2 [ 0.077218] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 0.077222] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff] [ 0.077227] pci 0000:00:01.0: > bridge window [mem 0xc0100000-0xc01fffff] [ 0.077231] pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xe7ffffff pref] [ 0.077258] pci 0000:02:00.0: >[104c:ac46] type 02 class 0x060700 [ 0.077277] pci 0000:02:00.0: >reg 10: [mem 0xb0000000-0xb0000fff] [ 0.077308] pci 0000:02:00.0: >supports D1 D2 [ 0.077311] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 0.077332] pci 0000:02:00.1: >[104c:ac46] type 02 class 0x060700 [ 0.077351] pci 0000:02:00.1: >reg 10: [mem 0xb1000000-0xb1000fff] [ 0.077381] pci 0000:02:00.1: >supports D1 D2 [ 0.077384] pci 0000:02:00.1: >PME# supported from D0 D1 D2 D3hot D3cold [ 0.077413] pci 0000:02:01.0: >[8086:101e] type 00 class 0x020000 [ 0.077432] pci 0000:02:01.0: >reg 10: [mem 0xc0240000-0xc025ffff] [ 0.077443] pci 0000:02:01.0: >reg 14: [mem 0xc0200000-0xc020ffff] [ 0.077454] pci 0000:02:01.0: >reg 18: [io 0x8000-0x803f] [ 0.077488] pci 0000:02:01.0: >reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.077519] pci 0000:02:01.0: >PME# supported from D0 D3hot D3cold [ 0.077540] pci 0000:02:02.0: >[168c:1014] type 00 class 0x020000 [ 0.077558] pci 0000:02:02.0: >reg 10: [mem 0xc0210000-0xc021ffff] [ 0.077675] pci 0000:00:1e.0: >PCI bridge to [bus 02-08] (subtractive decode) [ 0.077680] pci 0000:00:1e.0: > bridge window [io 0x4000-0x8fff] [ 0.077686] pci 0000:00:1e.0: > bridge window [mem 0xc0200000-0xcfffffff] [ 0.077692] pci 0000:00:1e.0: > bridge window [mem 0xe8000000-0xefffffff pref] [ 0.077695] pci 0000:00:1e.0: > bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.077699] pci 0000:00:1e.0: > bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.077781] pci_bus 0000:00: >on NUMA node 0 [ 0.077784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.077834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.077860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.077968] pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.081027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.081127] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.081225] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.081321] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.081399] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.081478] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.081556] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.081654] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.081800] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.081805] vgaarb: loaded [ 0.081806] vgaarb: bridge control possible 0000:01:00.0 [ 0.082113] SCSI subsystem initialized [ 0.082166] libata version 3.00 loaded. [ 0.082195] ACPI: bus type usb registered [ 0.082225] usbcore: registered new interface driver usbfs [ 0.082244] usbcore: registered new interface driver hub [ 0.082276] usbcore: registered new device driver usb [ 0.082391] PCI: Using ACPI for IRQ routing [ 0.082529] PCI: pci_cache_line_size set to 64 bytes [ 0.082605] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.082608] e820: reserve RAM buffer [mem 0x1ff60000-0x1fffffff] [ 0.082751] NetLabel: Initializing [ 0.082753] NetLabel: domain hash size = 128 [ 0.082754] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.082768] NetLabel: unlabeled traffic allowed by default [ 0.082896] Switching to clocksource pit [ 0.092756] AppArmor: AppArmor Filesystem Enabled [ 0.092817] pnp: PnP ACPI init [ 0.092847] ACPI: bus type pnp registered [ 0.093544] pnp 00:00: >[mem 0x00000000-0x0009ffff] [ 0.093549] pnp 00:00: >[mem 0x000c0000-0x000c3fff] [ 0.093552] pnp 00:00: >[mem 0x000c4000-0x000c7fff] [ 0.093555] pnp 00:00: >[mem 0x000c8000-0x000cbfff] [ 0.093558] pnp 00:00: >[mem 0x000cc000-0x000cffff] [ 0.093561] pnp 00:00: >[mem 0x000d0000-0x000d3fff] [ 0.093565] pnp 00:00: >[mem 0x000d4000-0x000d3fff disabled] [ 0.093568] pnp 00:00: >[mem 0x000d8000-0x000d7fff disabled] [ 0.093571] pnp 00:00: >[mem 0x000dc000-0x000dffff] [ 0.093574] pnp 00:00: >[mem 0x000e0000-0x000e3fff] [ 0.093577] pnp 00:00: >[mem 0x000e4000-0x000e7fff] [ 0.093580] pnp 00:00: >[mem 0x000e8000-0x000ebfff] [ 0.093583] pnp 00:00: >[mem 0x000ec000-0x000effff] [ 0.093587] pnp 00:00: >[mem 0x000f0000-0x000fffff] [ 0.093590] pnp 00:00: >[mem 0x00100000-0x1fffffff] [ 0.093593] pnp 00:00: >[mem 0xfec00000-0xffffffff] [ 0.093706] system 00:00: >[mem 0x00000000-0x0009ffff] could not be reserved [ 0.093711] system 00:00: >[mem 0x000c0000-0x000c3fff] could not be reserved [ 0.093715] system 00:00: >[mem 0x000c4000-0x000c7fff] could not be reserved [ 0.093719] system 00:00: >[mem 0x000c8000-0x000cbfff] could not be reserved [ 0.093723] system 00:00: >[mem 0x000cc000-0x000cffff] could not be reserved [ 0.093726] system 00:00: >[mem 0x000d0000-0x000d3fff] could not be reserved [ 0.093731] system 00:00: >[mem 0x000dc000-0x000dffff] could not be reserved [ 0.093734] system 00:00: >[mem 0x000e0000-0x000e3fff] could not be reserved [ 0.093738] system 00:00: >[mem 0x000e4000-0x000e7fff] could not be reserved [ 0.093742] system 00:00: >[mem 0x000e8000-0x000ebfff] could not be reserved [ 0.093746] system 00:00: >[mem 0x000ec000-0x000effff] could not be reserved [ 0.093750] system 00:00: >[mem 0x000f0000-0x000fffff] could not be reserved [ 0.093754] system 00:00: >[mem 0x00100000-0x1fffffff] could not be reserved [ 0.093758] system 00:00: >[mem 0xfec00000-0xffffffff] could not be reserved [ 0.093764] system 00:00: >Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.093798] pnp 00:01: >[bus 00-ff] [ 0.093801] pnp 00:01: >[io 0x0cf8-0x0cff] [ 0.093805] pnp 00:01: >[io 0x0000-0x0cf7 window] [ 0.093808] pnp 00:01: >[io 0x0d00-0xffff window] [ 0.093812] pnp 00:01: >[mem 0x000a0000-0x000bffff window] [ 0.093815] pnp 00:01: >[mem 0x000c0000-0x000c3fff window] [ 0.093819] pnp 00:01: >[mem 0x000c4000-0x000c7fff window] [ 0.093822] pnp 00:01: >[mem 0x000c8000-0x000cbfff window] [ 0.093825] pnp 00:01: >[mem 0x000cc000-0x000cffff window] [ 0.093829] pnp 00:01: >[mem 0x000d0000-0x000d3fff window] [ 0.093832] pnp 00:01: >[mem 0x000d4000-0x000d7fff window] [ 0.093835] pnp 00:01: >[mem 0x000d8000-0x000dbfff window] [ 0.093838] pnp 00:01: >[mem 0x000dc000-0x000dffff window] [ 0.093842] pnp 00:01: >[mem 0x000e0000-0x000e3fff window] [ 0.093845] pnp 00:01: >[mem 0x000e4000-0x000e7fff window] [ 0.093848] pnp 00:01: >[mem 0x000e8000-0x000ebfff window] [ 0.093852] pnp 00:01: >[mem 0x000ec000-0x000effff window] [ 0.093855] pnp 00:01: >[mem 0x20000000-0xfebfffff window] [ 0.093920] pnp 00:01: >Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.094028] pnp 00:02: >[io 0x0010-0x001f] [ 0.094032] pnp 00:02: >[io 0x0090-0x009f] [ 0.094035] pnp 00:02: >[io 0x0024-0x0025] [ 0.094038] pnp 00:02: >[io 0x0028-0x0029] [ 0.094041] pnp 00:02: >[io 0x002c-0x002d] [ 0.094044] pnp 00:02: >[io 0x0030-0x0031] [ 0.094047] pnp 00:02: >[io 0x0034-0x0035] [ 0.094049] pnp 00:02: >[io 0x0038-0x0039] [ 0.094052] pnp 00:02: >[io 0x003c-0x003d] [ 0.094055] pnp 00:02: >[io 0x00a4-0x00a5] [ 0.094058] pnp 00:02: >[io 0x00a8-0x00a9] [ 0.094061] pnp 00:02: >[io 0x00ac-0x00ad] [ 0.094064] pnp 00:02: >[io 0x00b0-0x00b5] [ 0.094067] pnp 00:02: >[io 0x00b8-0x00b9] [ 0.094075] pnp 00:02: >[io 0x00bc-0x00bd] [ 0.094078] pnp 00:02: >[io 0x0050-0x0053] [ 0.094081] pnp 00:02: >[io 0x0072-0x0077] [ 0.094084] pnp 00:02: >[io 0x002e-0x002f] [ 0.094087] pnp 00:02: >[io 0x1000-0x107f] [ 0.094090] pnp 00:02: >[io 0x1180-0x11bf] [ 0.094093] pnp 00:02: >[io 0x15e0-0x15ef] [ 0.094096] pnp 00:02: >[io 0x1600-0x162f] [ 0.094099] pnp 00:02: >[io 0x1632-0x167f] [ 0.094102] pnp 00:02: >[io 0x004e-0x004f] [ 0.094105] pnp 00:02: >[io 0x1630-0x1631] [ 0.094195] system 00:02: >[io 0x1000-0x107f] has been reserved [ 0.094199] system 00:02: >[io 0x1180-0x11bf] has been reserved [ 0.094203] system 00:02: >[io 0x15e0-0x15ef] has been reserved [ 0.094207] system 00:02: >[io 0x1600-0x162f] has been reserved [ 0.094211] system 00:02: >[io 0x1632-0x167f] has been reserved [ 0.094214] system 00:02: >[io 0x1630-0x1631] has been reserved [ 0.094219] system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.094238] pnp 00:03: >[io 0x0000-0x000f] [ 0.094241] pnp 00:03: >[io 0x0080-0x008f] [ 0.094244] pnp 00:03: >[io 0x00c0-0x00df] [ 0.094248] pnp 00:03: >[dma 4] [ 0.094284] pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active) [ 0.094296] pnp 00:04: >[io 0x0061] [ 0.094346] pnp 00:04: >Plug and Play ACPI device, IDs PNP0800 (active) [ 0.094359] pnp 00:05: >[io 0x00f0] [ 0.094366] pnp 00:05: >[irq 13] [ 0.094402] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.094415] pnp 00:06: >[io 0x0070-0x0071] [ 0.094418] pnp 00:06: >[irq 8] [ 0.094454] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.094466] pnp 00:07: >[io 0x0060] [ 0.094469] pnp 00:07: >[io 0x0064] [ 0.094472] pnp 00:07: >[irq 1] [ 0.094514] pnp 00:07: >Plug and Play ACPI device, IDs PNP0303 (active) [ 0.094526] pnp 00:08: >[irq 12] [ 0.094563] pnp 00:08: >Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.094601] pnp 00:09: >[io 0x03f0-0x03f5] [ 0.094605] pnp 00:09: >[io 0x03f7] [ 0.094608] pnp 00:09: >[irq 6] [ 0.094611] pnp 00:09: >[dma 2] [ 0.094663] pnp 00:09: >Plug and Play ACPI device, IDs PNP0700 (active) [ 0.094785] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.094902] pnp 00:0b: >[io 0x0378-0x037f] [ 0.094906] pnp 00:0b: >[irq 7] [ 0.094996] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0400 (active) [ 0.095141] pnp 00:0c: >Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled) [ 0.095737] pnp: PnP ACPI: found 13 devices [ 0.095740] ACPI: ACPI bus type pnp unregistered [ 0.095744] PnPBIOS: Disabled by ACPI PNP [ 0.132607] Switching to clocksource acpi_pm [ 0.132696] pci 0000:00:1f.1: >BAR 5: assigned [mem 0x20000000-0x200003ff] [ 0.132707] pci 0000:01:00.0: >BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] [ 0.132711] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 0.132715] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff] [ 0.132721] pci 0000:00:01.0: > bridge window [mem 0xc0100000-0xc01fffff] [ 0.132725] pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xe7ffffff pref] [ 0.132737] pci 0000:02:00.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.132741] pci 0000:02:00.0: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.132745] pci 0000:02:00.1: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.132748] pci 0000:02:00.1: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.132752] pci 0000:02:00.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.132756] pci 0000:02:00.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.132759] pci 0000:02:00.1: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.132762] pci 0000:02:00.1: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.132767] pci 0000:02:00.0: >BAR 15: assigned [mem 0xe8000000-0xebffffff pref] [ 0.132771] pci 0000:02:00.0: >BAR 16: assigned [mem 0xc4000000-0xc7ffffff] [ 0.132775] pci 0000:02:00.1: >BAR 15: assigned [mem 0xec000000-0xefffffff pref] [ 0.132779] pci 0000:02:00.1: >BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.132783] pci 0000:02:01.0: >BAR 6: assigned [mem 0xc0220000-0xc022ffff pref] [ 0.132787] pci 0000:02:00.0: >BAR 13: assigned [io 0x4000-0x40ff] [ 0.132790] pci 0000:02:00.0: >BAR 14: assigned [io 0x4400-0x44ff] [ 0.132794] pci 0000:02:00.1: >BAR 13: assigned [io 0x4800-0x48ff] [ 0.132798] pci 0000:02:00.1: >BAR 14: assigned [io 0x4c00-0x4cff] [ 0.132803] pci 0000:02:00.0: >CardBus bridge to [bus 03-06] [ 0.132806] pci 0000:02:00.0: > bridge window [io 0x4000-0x40ff] [ 0.132811] pci 0000:02:00.0: > bridge window [io 0x4400-0x44ff] [ 0.132817] pci 0000:02:00.0: > bridge window [mem 0xe8000000-0xebffffff pref] [ 0.132822] pci 0000:02:00.0: > bridge window [mem 0xc4000000-0xc7ffffff] [ 0.132828] pci 0000:02:00.1: >CardBus bridge to [bus 07-07] [ 0.132831] pci 0000:02:00.1: > bridge window [io 0x4800-0x48ff] [ 0.132836] pci 0000:02:00.1: > bridge window [io 0x4c00-0x4cff] [ 0.132842] pci 0000:02:00.1: > bridge window [mem 0xec000000-0xefffffff pref] [ 0.132847] pci 0000:02:00.1: > bridge window [mem 0xc8000000-0xcbffffff] [ 0.132852] pci 0000:00:1e.0: >PCI bridge to [bus 02-08] [ 0.132857] pci 0000:00:1e.0: > bridge window [io 0x4000-0x8fff] [ 0.132864] pci 0000:00:1e.0: > bridge window [mem 0xc0200000-0xcfffffff] [ 0.132869] pci 0000:00:1e.0: > bridge window [mem 0xe8000000-0xefffffff pref] [ 0.132890] pci 0000:00:1e.0: >setting latency timer to 64 [ 0.133133] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.133137] PCI: setting IRQ 11 as level-triggered [ 0.133310] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.133318] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff] [ 0.133321] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff] [ 0.133325] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff] [ 0.133328] pci_bus 0000:01: >resource 1 [mem 0xc0100000-0xc01fffff] [ 0.133332] pci_bus 0000:01: >resource 2 [mem 0xe0000000-0xe7ffffff pref] [ 0.133335] pci_bus 0000:02: >resource 0 [io 0x4000-0x8fff] [ 0.133338] pci_bus 0000:02: >resource 1 [mem 0xc0200000-0xcfffffff] [ 0.133342] pci_bus 0000:02: >resource 2 [mem 0xe8000000-0xefffffff pref] [ 0.133345] pci_bus 0000:02: >resource 4 [io 0x0000-0xffff] [ 0.133348] pci_bus 0000:02: >resource 5 [mem 0x00000000-0xfffffffff] [ 0.133351] pci_bus 0000:03: >resource 0 [io 0x4000-0x40ff] [ 0.133354] pci_bus 0000:03: >resource 1 [io 0x4400-0x44ff] [ 0.133358] pci_bus 0000:03: >resource 2 [mem 0xe8000000-0xebffffff pref] [ 0.133361] pci_bus 0000:03: >resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.133364] pci_bus 0000:07: >resource 0 [io 0x4800-0x48ff] [ 0.133368] pci_bus 0000:07: >resource 1 [io 0x4c00-0x4cff] [ 0.133371] pci_bus 0000:07: >resource 2 [mem 0xec000000-0xefffffff pref] [ 0.133374] pci_bus 0000:07: >resource 3 [mem 0xc8000000-0xcbffffff] [ 0.133435] NET: Registered protocol family 2 [ 0.133522] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.133684] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.133833] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.133984] TCP: Hash tables configured (established 16384 bind 16384) [ 0.133987] TCP: reno registered [ 0.133990] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.134002] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.134080] NET: Registered protocol family 1 [ 0.134112] pci 0000:00:1d.0: >power state changed by ACPI to D0 [ 0.134116] pci 0000:00:1d.0: >power state changed by ACPI to D0 [ 0.134145] pci 0000:00:1d.1: >power state changed by ACPI to D0 [ 0.134149] pci 0000:00:1d.1: >power state changed by ACPI to D0 [ 0.134360] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.134545] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.134571] pci 0000:00:1d.7: >power state changed by ACPI to D0 [ 0.134577] pci 0000:00:1d.7: >power state changed by ACPI to D0 [ 0.134744] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.134796] pci 0000:01:00.0: >Boot video device [ 0.134815] PCI: CLS 32 bytes, default 64 [ 0.134984] Simple Boot Flag at 0x35 set to 0x1 [ 0.135380] audit: initializing netlink socket (disabled) [ 0.135396] type=2000 audit(1359393058.132:1): initialized [ 0.162292] Trying to unpack rootfs image as initramfs... [ 0.196291] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.204095] VFS: Disk quotas dquot_6.5.2 [ 0.204195] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.205026] fuse init (API version 7.19) [ 0.205151] msgmni has been set to 961 [ 0.216229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.220388] io scheduler noop registered [ 0.220393] io scheduler deadline registered (default) [ 0.220414] io scheduler cfq registered [ 0.220650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.220683] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.220775] intel_idle: does not run on family 6 model 13 [ 0.221193] ACPI: AC Adapter [AC] (on-line) [ 0.221294] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.221458] ACPI: Lid Switch [LID] [ 0.221525] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.221531] ACPI: Sleep Button [SLPB] [ 0.221601] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.221605] ACPI: Power Button [PWRF] [ 0.221697] ACPI: Requesting acpi_cpufreq [ 0.580085] Freeing initrd memory: 14708k freed [ 0.603755] Marking TSC unstable due to TSC halts in idle [ 0.603772] ACPI: acpi_idle registered with cpuidle [ 0.611677] thermal LNXTHERM:00: >registered as thermal_zone0 [ 0.611682] ACPI: Thermal Zone [THM0] (49 C) [ 0.611713] ACPI: Battery Slot [BAT0] (battery absent) [ 0.611797] GHES: HEST is not enabled! [ 0.611911] ACPI: Battery Slot [BAT0] (battery absent) [ 0.611933] isapnp: Scanning for PnP cards... [ 0.617510] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.618941] serial 00:0a: >[io 0x03f8-0x03ff] [ 0.618997] serial 00:0a: >[irq 4] [ 0.619306] serial 00:0a: >activated [ 0.619433] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.619728] Linux agpgart interface v0.103 [ 0.619939] agpgart-intel 0000:00:00.0: >Intel 855PM Chipset [ 0.677473] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xd0000000 [ 0.679446] brd: module loaded [ 0.680476] loop: module loaded [ 0.680674] ata_piix 0000:00:1f.1: >version 2.13 [ 0.680686] ata_piix 0000:00:1f.1: >enabling device (0005 -> 0007) [ 0.680740] ata_piix 0000:00:1f.1: >setting latency timer to 64 [ 0.681133] scsi0 : ata_piix [ 0.681217] scsi1 : ata_piix [ 0.681831] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 0.681834] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 0.682281] Fixed MDIO Bus: probed [ 0.682354] tun: Universal TUN/TAP device driver, 1.6 [ 0.682356] tun: (C) 1999-2004 Max Krasnyansky [ 0.682428] PPP generic driver version 2.4.2 [ 0.682489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.682514] ehci_hcd 0000:00:1d.7: >power state changed by ACPI to D0 [ 0.682520] ehci_hcd 0000:00:1d.7: >power state changed by ACPI to D0 [ 0.682544] ehci_hcd 0000:00:1d.7: >setting latency timer to 64 [ 0.682549] ehci_hcd 0000:00:1d.7: >EHCI Host Controller [ 0.682557] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1 [ 0.682590] ehci_hcd 0000:00:1d.7: >debug port 1 [ 0.686488] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported [ 0.686707] ehci_hcd 0000:00:1d.7: >irq 11, io mem 0xc0000000 [ 0.730151] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00 [ 0.730180] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.730183] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.730187] usb usb1: >Product: EHCI Host Controller [ 0.730190] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 0.730192] usb usb1: >SerialNumber: 0000:00:1d.7 [ 0.773770] hub 1-0:1.0: >USB hub found [ 0.773776] hub 1-0:1.0: >6 ports detected [ 0.773872] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.773896] uhci_hcd: USB Universal Host Controller Interface driver [ 0.773913] uhci_hcd 0000:00:1d.0: >power state changed by ACPI to D0 [ 0.773917] uhci_hcd 0000:00:1d.0: >power state changed by ACPI to D0 [ 0.773930] uhci_hcd 0000:00:1d.0: >setting latency timer to 64 [ 0.773934] uhci_hcd 0000:00:1d.0: >UHCI Host Controller [ 0.773940] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2 [ 0.773963] uhci_hcd 0000:00:1d.0: >irq 11, io base 0x00001800 [ 0.774002] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.774005] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.774009] usb usb2: >Product: UHCI Host Controller [ 0.774012] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.774014] usb usb2: >SerialNumber: 0000:00:1d.0 [ 0.774150] hub 2-0:1.0: >USB hub found [ 0.774157] hub 2-0:1.0: >2 ports detected [ 0.774233] uhci_hcd 0000:00:1d.1: >power state changed by ACPI to D0 [ 0.774237] uhci_hcd 0000:00:1d.1: >power state changed by ACPI to D0 [ 0.774248] uhci_hcd 0000:00:1d.1: >setting latency timer to 64 [ 0.774253] uhci_hcd 0000:00:1d.1: >UHCI Host Controller [ 0.774261] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3 [ 0.774284] uhci_hcd 0000:00:1d.1: >irq 11, io base 0x00001820 [ 0.774321] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.774324] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.774327] usb usb3: >Product: UHCI Host Controller [ 0.774330] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.774333] usb usb3: >SerialNumber: 0000:00:1d.1 [ 0.774451] hub 3-0:1.0: >USB hub found [ 0.774456] hub 3-0:1.0: >2 ports detected [ 0.774545] uhci_hcd 0000:00:1d.2: >setting latency timer to 64 [ 0.774549] uhci_hcd 0000:00:1d.2: >UHCI Host Controller [ 0.774556] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4 [ 0.774578] uhci_hcd 0000:00:1d.2: >irq 11, io base 0x00001840 [ 0.774613] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.774616] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.774619] usb usb4: >Product: UHCI Host Controller [ 0.774622] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.774625] usb usb4: >SerialNumber: 0000:00:1d.2 [ 0.774738] hub 4-0:1.0: >USB hub found [ 0.774743] hub 4-0:1.0: >2 ports detected [ 0.774879] usbcore: registered new interface driver libusual [ 0.774946] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.780513] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.780520] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.780652] mousedev: PS/2 mouse device common for all mice [ 0.780830] rtc_cmos 00:06: >RTC can wake from S4 [ 0.780947] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0 [ 0.780965] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.781033] device-mapper: uevent: version 1.0.3 [ 0.781112] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.781153] EISA: Probing bus 0 at eisa.0 [ 0.781159] Cannot allocate resource for EISA slot 1 [ 0.781162] Cannot allocate resource for EISA slot 2 [ 0.781164] Cannot allocate resource for EISA slot 3 [ 0.781166] Cannot allocate resource for EISA slot 4 [ 0.781168] Cannot allocate resource for EISA slot 5 [ 0.781171] Cannot allocate resource for EISA slot 6 [ 0.781173] Cannot allocate resource for EISA slot 7 [ 0.781175] Cannot allocate resource for EISA slot 8 [ 0.781177] EISA: Detected 0 cards. [ 0.781217] cpuidle: using governor ladder [ 0.781255] cpuidle: using governor menu [ 0.781257] EFI Variables Facility v0.08 2004-May-17 [ 0.781457] ashmem: initialized [ 0.781620] TCP: cubic registered [ 0.781773] NET: Registered protocol family 10 [ 0.782022] NET: Registered protocol family 17 [ 0.782040] Key type dns_resolver registered [ 0.782145] Using IPI No-Shortcut mode [ 0.782250] PM: Hibernation image not present or could not be loaded. [ 0.782267] registered taskstats version 1 [ 0.871825] Key type trusted registered [ 0.960649] Key type encrypted registered [ 0.962922] Magic number: 13:492:189 [ 0.963049] rtc_cmos 00:06: >setting system clock to 2013-01-28 17:10:59 UTC (1359393059) [ 0.963990] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33 [ 0.964809] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.964811] EDD information not available. [ 1.008495] isapnp: No Plug & Play device found [ 1.009013] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.009752] ata1.00: ATA-5: FUJITSU MHM2100AT, 3D22, max UDMA/66 [ 1.009756] ata1.00: 19640880 sectors, multi 16: LBA [ 1.016292] ata2.00: configured for UDMA/33 [ 1.053837] ata1.00: configured for UDMA/66 [ 1.053973] scsi 0:0:0:0: >Direct-Access ATA FUJITSU MHM2100A 3D22 PQ: 0 ANSI: 5 [ 1.054172] sd 0:0:0:0: >[sda] 19640880 512-byte logical blocks: (10.0 GB/9.36 GiB) [ 1.054236] sd 0:0:0:0: >[sda] Write Protect is off [ 1.054240] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 1.054268] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054621] sd 0:0:0:0: >Attached scsi generic sg0 type 0 [ 1.170034] sda: sda1 sda2 < sda5 > [ 1.170365] sd 0:0:0:0: >[sda] Attached SCSI disk [ 1.175529] scsi 1:0:0:0: >CD-ROM HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5 [ 1.181468] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.181471] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.181581] sr 1:0:0:0: >Attached scsi CD-ROM sr0 [ 1.181719] sr 1:0:0:0: >Attached scsi generic sg1 type 5 [ 1.181793] Freeing unused kernel memory: 756k freed [ 1.182265] Write protecting the kernel text: 5960k [ 1.182285] Write protecting the kernel read-only data: 2424k [ 1.199404] udevd[89]: starting version 175 [ 1.334427] Floppy drive(s): fd0 is 1.44M [ 1.351165] FDC 0 is a National Semiconductor PC87306 [ 1.373837] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.373842] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.661308] e1000 0000:02:01.0: >eth0: (PCI:33MHz:32-bit) 00:0d:60:ca:70:5a [ 1.661318] e1000 0000:02:01.0: >eth0: Intel(R) PRO/1000 Network Connection [ 5.511079] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.391334] Adding 465848k swap on /dev/sda5. Priority:-1 extents:1 across:465848k [ 10.189627] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.672040] udevd[300]: starting version 175 [ 13.158111] lp: driver loaded but no devices found [ 15.050571] parport_pc 00:0b: >reported by Plug and Play ACPI [ 15.050627] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.144341] lp0: using parport0 (interrupt-driven). [ 15.206289] Non-volatile memory driver v1.3 [ 15.334505] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 15.335174] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input4 [ 15.420494] ppdev: user-space parallel port driver [ 15.636317] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x18 [ 15.657516] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.785572] intel_rng: FWH not detected [ 16.151927] irda_init() [ 16.151947] NET: Registered protocol family 23 [ 16.226971] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 16.260664] lpc_ich 0000:00:1f.0: >I/O space for GPIO uninitialized [ 16.515003] psmouse serio1: >synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0 [ 16.515013] psmouse serio1: >synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 16.555041] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 16.829844] nsc-ircc 00:0c: >[io 0x02f8-0x02ff] [ 16.829900] nsc-ircc 00:0c: >[irq 3] [ 16.829905] nsc-ircc 00:0c: >[dma 1] [ 16.830316] nsc-ircc 00:0c: >activated [ 16.830321] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 16.831145] nsc-ircc, chip->init [ 16.831155] nsc-ircc, Found chip at base=0x02e [ 16.831178] nsc-ircc, driver loaded (Dag Brattli) [ 16.837070] IrDA: Registered device irda0 [ 16.837076] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 16.927389] cfg80211: Calling CRDA to update world regulatory domain [ 16.980166] yenta_cardbus 0000:02:00.0: >CardBus bridge found [1014:0552] [ 16.980186] yenta_cardbus 0000:02:00.0: >Using INTVAL to route CSC interrupts to PCI [ 16.980189] yenta_cardbus 0000:02:00.0: >Routing CardBus interrupts to PCI [ 16.980195] yenta_cardbus 0000:02:00.0: >TI: mfunc 0x01d21b22, devctl 0x64 [ 17.130254] [drm] Initialized drm 1.1.0 20060810 [ 17.212543] yenta_cardbus 0000:02:00.0: >ISA IRQ mask 0x0430, PCI irq 11 [ 17.212549] yenta_cardbus 0000:02:00.0: >Socket status: 30000086 [ 17.212558] yenta_cardbus 0000:02:00.0: >pcmcia: parent PCI bridge window: [io 0x4000-0x8fff] [ 17.212562] pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x4000-0x8fff: [ 17.213309] excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f [ 17.235285] yenta_cardbus 0000:02:00.0: >pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff] [ 17.235292] pcmcia_socket pcmcia_socket0: >cs: memory probe 0xc0200000-0xcfffffff: [ 17.235295] excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff [ 17.235324] yenta_cardbus 0000:02:00.0: >pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref] [ 17.235328] pcmcia_socket pcmcia_socket0: >cs: memory probe 0xe8000000-0xefffffff: [ 17.235344] excluding 0xe8000000-0xefffffff [ 17.235773] yenta_cardbus 0000:02:00.1: >CardBus bridge found [1014:0552] [ 17.235790] yenta_cardbus 0000:02:00.1: >Using INTVAL to route CSC interrupts to PCI [ 17.235793] yenta_cardbus 0000:02:00.1: >Routing CardBus interrupts to PCI [ 17.235799] yenta_cardbus 0000:02:00.1: >TI: mfunc 0x01d21b22, devctl 0x64 [ 17.461862] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.464469] yenta_cardbus 0000:02:00.1: >ISA IRQ mask 0x0430, PCI irq 11 [ 17.464474] yenta_cardbus 0000:02:00.1: >Socket status: 30000086 [ 17.464485] yenta_cardbus 0000:02:00.1: >pcmcia: parent PCI bridge window: [io 0x4000-0x8fff] [ 17.464489] pcmcia_socket pcmcia_socket1: >cs: IO port probe 0x4000-0x8fff: [ 17.465236] excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f [ 17.479948] yenta_cardbus 0000:02:00.1: >pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff] [ 17.479952] pcmcia_socket pcmcia_socket1: >cs: memory probe 0xc0200000-0xcfffffff: [ 17.479956] excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff [ 17.479985] yenta_cardbus 0000:02:00.1: >pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref] [ 17.479988] pcmcia_socket pcmcia_socket1: >cs: memory probe 0xe8000000-0xefffffff: [ 17.480025] excluding 0xe8000000-0xefffffff [ 18.044511] ath5k 0000:02:02.0: >registered as 'phy0' [ 18.065495] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 18.065498] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 18.065500] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04 [ 18.065502] thinkpad_acpi: IBM ThinkPad T42, model 23739XG [ 18.065504] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 18.065506] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 18.068230] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 18.077369] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 18.078768] Registered led device: tpacpi::thinklight [ 18.079337] Registered led device: tpacpi::power [ 18.079881] Registered led device: tpacpi::standby [ 18.085787] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 18.090290] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 18.334740] [drm] radeon defaulting to kernel modesetting. [ 18.334747] [drm] radeon kernel modesetting enabled. [ 18.334858] radeon 0000:01:00.0: >power state changed by ACPI to D0 [ 18.334863] radeon 0000:01:00.0: >power state changed by ACPI to D0 [ 18.336896] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1014:0x0550). [ 18.336949] [drm] register mmio base: 0xC0100000 [ 18.336951] [drm] register mmio size: 65536 [ 18.337177] agpgart-intel 0000:00:00.0: >AGP 2.0 bridge [ 18.337201] agpgart-intel 0000:00:00.0: >putting AGP V2 device into 1x mode [ 18.337286] radeon 0000:01:00.0: >putting AGP V2 device into 1x mode [ 18.337332] radeon 0000:01:00.0: >GTT: 256M 0xD0000000 - 0xDFFFFFFF [ 18.337337] [drm] Generation 2 PCI interface, using max accessible memory [ 18.337354] radeon 0000:01:00.0: >VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (64M used) [ 18.337372] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 18.337374] [drm] Driver supports precise vblank timestamp query. [ 18.337398] [drm] radeon: irq initialized. [ 18.337849] [drm] Detected VRAM RAM=128M, BAR=128M [ 18.337854] [drm] RAM width 128bits DDR [ 18.337997] [TTM] Zone kernel: Available graphics memory: 253884 kiB [ 18.337999] [TTM] Initializing pool allocator [ 18.338006] [TTM] Initializing DMA pool allocator [ 18.338098] [drm] radeon: 64M of VRAM memory ready [ 18.338116] [drm] radeon: 256M of GTT memory ready. [ 18.338227] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 18.339779] radeon 0000:01:00.0: >WB disabled [ 18.339789] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe082c000 [ 18.340679] [drm] Loading R300 Microcode [ 18.400344] ath: EEPROM regdomain: 0x61 [ 18.400348] ath: EEPROM indicates we should expect a direct regpair map [ 18.400352] ath: Country alpha2 being used: 00 [ 18.400354] ath: Regpair used: 0x61 [ 18.400358] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 18.400361] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400364] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 18.400366] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400368] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 18.400371] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400373] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 18.400376] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400378] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 18.400380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400383] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 18.400385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400387] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 18.400390] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400392] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 18.400394] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400397] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 18.400399] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400401] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 18.400404] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400406] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 18.400408] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400411] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 18.400413] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400415] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 18.400418] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400420] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 18.400422] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 18.400425] cfg80211: Disabling freq 5040 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 18.400427] cfg80211: Disabling freq 5060 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 18.400429] cfg80211: Disabling freq 5080 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 18.400432] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 18.400434] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400436] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 18.400439] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400441] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 18.400443] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400446] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 18.400448] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400450] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 18.400453] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400455] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 18.400457] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400460] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 18.400462] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400464] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 18.400467] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400469] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 18.400472] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400474] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 18.400476] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400479] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 18.400481] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400483] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 18.400486] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400488] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 18.400490] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400493] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 18.400495] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400497] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 18.400500] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400502] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 18.400504] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400507] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 18.400509] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400511] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 18.400514] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400516] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 18.400518] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400521] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 18.400523] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400525] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 18.400528] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400530] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 18.400532] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400535] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 18.400537] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400539] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 18.400542] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 18.400704] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 18.623554] [drm] radeon: ring at 0x00000000D0001000 [ 18.623579] [drm] ring test succeeded in 1 usecs [ 18.623810] [drm] ib test succeeded in 0 usecs [ 18.624068] [drm] Panel ID String: SXGA+ Single (85MHz) [ 18.624071] [drm] Panel Size 1400x1050 [ 18.635049] [drm] radeon legacy LVDS backlight initialized [ 18.637629] [drm] No TV DAC info found in BIOS [ 18.637801] [drm] Radeon Display Connectors [ 18.637804] [drm] Connector 0: [ 18.637806] [drm] VGA-1 [ 18.637809] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 18.637811] [drm] Encoders: [ 18.637812] [drm] CRT1: INTERNAL_DAC1 [ 18.637814] [drm] Connector 1: [ 18.637816] [drm] DVI-D-1 [ 18.637818] [drm] HPD1 [ 18.637820] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 18.637822] [drm] Encoders: [ 18.637823] [drm] DFP1: INTERNAL_TMDS1 [ 18.637825] [drm] Connector 2: [ 18.637826] [drm] LVDS-1 [ 18.637828] [drm] Encoders: [ 18.637829] [drm] LCD1: INTERNAL_LVDS [ 18.637831] [drm] Connector 3: [ 18.637833] [drm] SVIDEO-1 [ 18.637834] [drm] Encoders: [ 18.637836] [drm] TV1: INTERNAL_DAC2 [ 18.637896] [drm] radeon: power management initialized [ 18.707809] [drm] fb mappable at 0xE0040000 [ 18.707813] [drm] vram apper at 0xE0000000 [ 18.707814] [drm] size 5914624 [ 18.707816] [drm] fb depth is 24 [ 18.707818] [drm] pitch is 5632 [ 18.708048] fbcon: radeondrmfb (fb0) is primary device [ 18.709128] Console: switching to colour frame buffer device 175x65 [ 18.709200] fb0: radeondrmfb frame buffer device [ 18.709202] drm: registered panic notifier [ 18.709213] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0 [ 18.757825] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' [ 18.758194] Registered led device: ath5k-phy0::rx [ 18.758222] Registered led device: ath5k-phy0::tx [ 18.758235] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 18.758237] ath5k: phy0: RF5111 5GHz radio found (0x17) [ 18.758240] ath5k: phy0: RF2111 2GHz radio found (0x23) [ 18.940916] snd_intel8x0 0000:00:1f.5: >setting latency timer to 64 [ 19.742772] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 19.742784] cfg80211: World regulatory domain updated: [ 19.742786] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.742789] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.742791] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.742794] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.742796] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.742799] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.864047] intel8x0_measure_ac97_clock: measured 55441 usecs (2671 samples) [ 19.864051] intel8x0: clocking to 48000 [ 20.397644] type=1400 audit(1359393078.930:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=564 comm="apparmor_parser" [ 20.398641] type=1400 audit(1359393078.930:3): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=589 comm="apparmor_parser" [ 20.399468] type=1400 audit(1359393078.930:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=591 comm="apparmor_parser" [ 20.400292] type=1400 audit(1359393078.934:5): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=664 comm="apparmor_parser" [ 22.135648] init: failsafe main process (697) killed by TERM signal [ 22.395444] psmouse serio2: >trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 22.605274] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 25.958551] Bluetooth: Core ver 2.16 [ 25.958582] NET: Registered protocol family 31 [ 25.958584] Bluetooth: HCI device and connection manager initialized [ 25.959174] Bluetooth: HCI socket layer initialized [ 25.959177] Bluetooth: L2CAP socket layer initialized [ 25.959187] Bluetooth: SCO socket layer initialized [ 26.103716] Bluetooth: RFCOMM TTY layer initialized [ 26.103724] Bluetooth: RFCOMM socket layer initialized [ 26.103726] Bluetooth: RFCOMM ver 1.11 [ 26.528538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.528545] Bluetooth: BNEP filters: protocol multicast [ 26.667533] type=1400 audit(1359393085.202:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=814 comm="apparmor_parser" [ 26.668360] type=1400 audit(1359393085.202:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=814 comm="apparmor_parser" [ 33.352743] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.353242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.357346] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 33.369256] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.369294] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.369929] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.091618] type=1400 audit(1359393093.622:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=911 comm="apparmor_parser" [ 35.092316] type=1400 audit(1359393093.626:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=911 comm="apparmor_parser" [ 35.120889] type=1400 audit(1359393093.654:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=912 comm="apparmor_parser" [ 35.121495] type=1400 audit(1359393093.654:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=912 comm="apparmor_parser" [ 35.121848] type=1400 audit(1359393093.654:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=912 comm="apparmor_parser" [ 35.206639] type=1400 audit(1359393093.738:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=913 comm="apparmor_parser" [ 35.215323] type=1400 audit(1359393093.746:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=913 comm="apparmor_parser" [ 35.217114] type=1400 audit(1359393093.750:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=913 comm="apparmor_parser" [ 35.222255] type=1400 audit(1359393093.754:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=913 comm="apparmor_parser" [ 35.223315] type=1400 audit(1359393093.754:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=913 comm="apparmor_parser" [ 35.720500] init: alsa-restore main process (965) terminated with status 99